Adrian Chadd de2d9111ec Be slightly more paranoid with the TX DMA buffer maximum threshold. ... Specifically - never jack the TX FIFO threshold up to the absolute maximum; always leave enough space for two DMA transactions to appear. This is a paranoia from the Linux ath9k driver. It can't hurt. Obtained from: Linux ath9k		2013-02-21 08:42:40 +00:00
..
ah_regdomain	These two are ath_hal regulatory domain updates from the Atheros	2011-07-20 12:46:58 +00:00
ar5210	Disable WEP hardware encryption on the AR5210, in order to allow other	2012-11-19 23:42:46 +00:00
ar5211	Clean some 'svn:executable' properties in the tree.	2013-01-26 22:08:21 +00:00
ar5212	When programming the beacon timer configuration, be very explicit about	2012-11-27 02:18:41 +00:00
ar5312	Stop using the hardware register value byte order swapping for now,	2012-04-19 03:26:21 +00:00
ar5416	Be slightly more paranoid with the TX DMA buffer maximum threshold.	2013-02-21 08:42:40 +00:00
ar9001	Since the PLL changes aren't in here yet for the AR9130 half/quarter	2012-10-31 21:14:25 +00:00
ar9002	Bring over the basic spectral scan framework code from Qualcomm Atheros.	2013-01-02 00:38:01 +00:00
ar9003	Add AR9380 devid HAL definitions and probe/attach strings.	2012-08-23 03:03:00 +00:00
ah_debug.h	Add new HAL configuration features for the updated AR9300 HAL.	2012-11-07 06:23:23 +00:00
ah_decode.h	Add a threadid to the ah_decode API.	2012-04-04 20:46:20 +00:00
ah_desc.h	Extend the TX descriptor debug printing to be properly aware of	2012-08-19 02:22:16 +00:00
ah_devid.h	Add the emulation PCI device id - these days, 0xabcd shows up all over	2012-10-31 20:58:24 +00:00
ah_diagcodes.h	Add some more diagnostic codes.	2012-08-24 00:17:39 +00:00
ah_eeprom_9287.c	Move this magic check to only occur if no eeprom data is given.	2012-08-26 04:26:49 +00:00
ah_eeprom_9287.h	Make sure the extended regdomain word is initialised.	2011-06-28 00:01:55 +00:00
ah_eeprom_v1.c	Fix the eeprom set API method to return HAL_STATUS.	2011-05-14 15:12:02 +00:00
ah_eeprom_v1.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah_eeprom_v3.c	Fix the eeprom set API method to return HAL_STATUS.	2011-05-14 15:12:02 +00:00
ah_eeprom_v3.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah_eeprom_v4k.c	"Upgrade" the AR9285 code to support PCI/ART EEPROM on flash.	2012-04-20 21:56:13 +00:00
ah_eeprom_v4k.h	Bring over a pdadc calibration fix from ath9k - unused power detector	2011-04-22 10:57:46 +00:00
ah_eeprom_v14.c	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_eeprom_v14.h	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_eeprom.h	Bring over some new EEPROM regulatory domain flags.	2012-08-24 01:14:00 +00:00
ah_internal.h	Add spectral scan capability.	2012-12-30 06:46:11 +00:00
ah_regdomain.c	Add XC900 SKU mapping.	2012-12-07 06:38:30 +00:00
ah_regdomain.h	Migrate the regulatory database definitions into separate header files	2011-03-10 03:13:56 +00:00
ah_soc.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah.c	Add the initial HAL glue for the spectral analysis support.	2012-12-30 06:48:12 +00:00
ah.h	Place-holders for enable/active parameter flags.	2013-01-11 02:25:39 +00:00