freebsd-nq/sys/dev/usb
Remko Lodder e2d3226b4c Add support for the CyberPower CP1500AVRLCD.
PR:		126845
Submitted by:	gavin
Approved by:	imp (mentor, implicit)
MFC after:	1 week
2008-09-09 19:59:51 +00:00
..
dsbr100io.h Don't pretend to support !BSD systems. 2007-06-12 19:01:32 +00:00
ehci_pci.c opt_bus.h isn't needed here. It is supposed to be for subr_bus.c only. 2008-08-30 16:23:04 +00:00
ehci.c Fix compile 2008-08-18 10:39:59 +00:00
ehcireg.h Add isochronous transfer support for USB 2.0 2008-08-18 04:49:58 +00:00
ehcivar.h Add isochronous transfer support for USB 2.0 2008-08-18 04:49:58 +00:00
FILES Acknowledge (dearly) departed files 2006-11-21 22:29:06 +00:00
hid.c Fix a typo: According to the hid spec, Global item #3 2008-08-18 17:05:59 +00:00
hid.h
if_aue.c Replace callout_init(..., 1) with callout_init(..., CALLOUT_MPSAFE) for 2008-04-16 16:47:14 +00:00
if_auereg.h Remove my "custom" locks that allow for lock acquire abort, they are 2007-01-08 23:24:21 +00:00
if_axe.c From the OpenBSD commit log : 2008-05-13 14:00:09 +00:00
if_axereg.h Add private tx/rx buffer management to support large frame sizes 2007-11-10 16:23:38 +00:00
if_cdce.c Fix two more PRs: 2007-06-30 20:18:44 +00:00
if_cdcereg.h Prefer device_printf over printf 2007-06-10 07:33:48 +00:00
if_cue.c Note the Belkin F5U111 Adapter is covered by NETMATE entry. 2007-06-23 06:29:19 +00:00
if_cuereg.h Prefer device_printf to printf where sane. 2007-06-11 05:42:47 +00:00
if_kue.c Add a boatload of devices from OpenBSD and NetBSD to kue and cdce. 2007-06-23 06:47:43 +00:00
if_kuereg.h Prefer device_printf to printf 2007-06-11 05:50:47 +00:00
if_rue.c When all the other drivers were converted to scheduling a taskqueue to 2007-07-09 16:58:07 +00:00
if_ruereg.h Missed in last commit: add usb task for rue to use for its ticks. 2007-07-09 20:56:39 +00:00
if_rum.c Add the D-Link DWA-110 2008-08-19 01:44:56 +00:00
if_rumreg.h Update 802.11 wireless support: 2007-06-11 03:36:55 +00:00
if_rumvar.h Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
if_udav.c Add support for the Davicom DM9601. 2008-04-26 05:46:28 +00:00
if_udavreg.h More removing compatibility macros. 2006-09-07 00:06:42 +00:00
if_upgt.c Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4). 2008-08-11 03:57:31 +00:00
if_upgtvar.h Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4). 2008-08-11 03:57:31 +00:00
if_ural.c Free the correct buffer list on failure. 2008-07-30 00:38:10 +00:00
if_uralreg.h Update 802.11 wireless support: 2007-06-11 03:36:55 +00:00
if_uralvar.h Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
if_zyd.c Add ZyXEL G-202 2008-09-05 11:27:33 +00:00
if_zydfw.h upgrade zd1211b firmware for the zyd driver. This solves a hardware 2007-11-03 19:24:51 +00:00
if_zydreg.h Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
kue_fw.h s/Static/static/g 2006-09-06 23:44:25 +00:00
ohci_pci.c opt_bus.h isn't needed here. It is supposed to be for subr_bus.c only. 2008-08-30 16:23:04 +00:00
ohci.c Fix a benign typo that would give out an incorrect warning message. 2008-07-17 22:40:23 +00:00
ohcireg.h
ohcivar.h Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
rio500_usb.h Don't pretend to support !BSD systems. 2007-06-12 19:01:32 +00:00
rt2573_ucode.h Add support for Ralink Technology RT2501USB/RT2601USB devices. 2007-05-06 10:07:21 +00:00
sl811hs.c Include usb_port.h to fix build. 2007-06-19 10:28:08 +00:00
sl811hsreg.h
sl811hsvar.h Use pause() rather than using tsleep() on a dummy variable. 2007-02-27 17:19:33 +00:00
slhci_pccard.c Include usb_port.h to fix build. 2007-06-19 10:28:08 +00:00
uark.c Allow arbitrary baud rates, not just the standard ones. 2008-01-26 04:30:48 +00:00
ubsa.c Bring in support for the MC8755 Sierra UMTS card. 2008-08-20 13:14:58 +00:00
ubser.c Prefer device_printf to printf("%s: ...", device_get_nameunit()). On 2007-07-05 06:42:14 +00:00
ubser.h
uchcom.c Add Winchiphead (or Nanjin QinHeng Electronics) USB Serial converter driver. 2007-10-18 10:51:06 +00:00
ucom.c Keep track of the active buffer on output. For the moment, panic if 2008-09-05 20:49:45 +00:00
ucomvar.h Keep track of the active buffer on output. For the moment, panic if 2008-09-05 20:49:45 +00:00
ucycom.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
udbp.c Prefer device_printf to printf + device_get_nameunit. This saves 2007-07-05 15:25:32 +00:00
udbp.h
ufm.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
ufoma.c All the other routines returned EIO from the param routine. Return it 2008-08-31 03:22:19 +00:00
uftdi.c Integrate the new MPSAFE TTY layer to the FreeBSD operating system. 2008-08-20 08:31:58 +00:00
uftdireg.h Calculate baud rate divisor instead of allowing only a fixed set of 2008-01-25 02:41:44 +00:00
ugen.c Don't include <sys/tty.h> in non-TTY drivers. 2008-07-24 09:54:10 +00:00
ugraphire_rdesc.h
uhci_pci.c opt_bus.h is supposed to be for subr_bus.c only. There's no need for 2008-08-30 16:21:16 +00:00
uhci.c Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
uhcireg.h
uhcivar.h Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
uhid.c Don't include <sys/tty.h> in non-TTY drivers. 2008-07-24 09:54:10 +00:00
uhub.c Fix two more PRs: 2007-06-30 20:18:44 +00:00
uipaq.c Make uipaq's ucom callbacks easier to read while I'm hear looking for 2008-08-31 03:39:59 +00:00
ukbd.c Remove explicit calls to keyboard methods with their respective variants 2007-12-29 21:55:25 +00:00
ulpt.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
umass.c Add support for the Alcor Card Reader (9361) 2008-08-21 20:37:38 +00:00
umct.c Finish removal of usb_port.h macros. 2007-06-18 22:27:57 +00:00
umodem.c All the other routines returned EIO from the param routine. Return it 2008-08-31 03:22:19 +00:00
ums.c sc->sc_ibuf should be malloc'ed after quirks applied, as 2008-08-18 17:13:23 +00:00
uplcom.c Kill dead code. This has been a 'todo' item for a long time and the 2008-08-31 03:08:26 +00:00
urio.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
usb_ethersubr.c Remove NETISR_MPSAFE, which allows specific netisr handlers to be directly 2008-07-04 00:21:38 +00:00
usb_ethersubr.h Add the following functions to abstract away the creation of task threads 2007-01-08 23:21:06 +00:00
usb_if.m
usb_mem.c s/logprintf/printf/g 2007-06-20 05:11:37 +00:00
usb_mem.h Remove more __OtherBSD__ ifdefs that don't make sense, and haven't for 2007-06-13 05:45:48 +00:00
usb_port.h Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
usb_quirks.c Add support for the CyberPower CP1500AVRLCD. 2008-09-09 19:59:51 +00:00
usb_quirks.h Add support for various MS Wirless usb mice. the patch is from 2007-06-29 21:07:41 +00:00
usb_subr.c Fix two more PRs: 2007-06-30 20:18:44 +00:00
usb.c Drop Giant before calling kproc_exit(), so we don't trigger assertion in 2008-05-20 12:34:30 +00:00
usb.h Add isochronous transfer support for USB 2.0 2008-08-18 04:49:58 +00:00
usbcdc.h
usbdevs Add support for the CyberPower CP1500AVRLCD. 2008-09-09 19:59:51 +00:00
usbdi_util.c s/logprintf/printf/g 2007-06-20 05:11:37 +00:00
usbdi_util.h protect against multiple inclusion (this is useful when you 2007-01-03 10:50:03 +00:00
usbdi.c Correct cache handling for xfer requests marked URQ_REQUEST: many (if not 2008-03-20 16:04:13 +00:00
usbdi.h add support for %b printing of request + xfer flags 2008-03-20 03:09:59 +00:00
usbdivar.h add support for %b printing of request + xfer flags 2008-03-20 03:09:59 +00:00
usbhid.h
uscanner.c Add USB ids for the Epson DX7400 / CX7300 multifunction scanner printer 2008-06-27 10:30:08 +00:00
uslcom.c Oops, I accidently concatenated uslcom.[c4] multiple times before the 2008-03-05 14:18:29 +00:00
uvisor.c Style nit: s/^ }/}/ 2008-08-23 23:28:33 +00:00
uvscom.c Kill dead code. This has been a 'todo' item for a long time and the 2008-08-31 03:08:26 +00:00
uxb360gp_rdesc.h Change my email address to the one from the FreeBSD project. 2008-05-24 18:35:55 +00:00