freebsd-nq/sys/dev/cxgbe/firmware/t4fw_cfg.txt
Navdeep Parhar 460f25e5ca cxgbe(4): Enable PFs 0-3, and allow creation of SR-IOV VFs on these PFs
in the default configuration files.
2016-03-16 19:46:22 +00:00

252 lines
4.4 KiB
Plaintext

# Firmware configuration file.
#
# Global limits (some are hardware limits, others are due to the firmware).
# nvi = 128 virtual interfaces
# niqflint = 1023 ingress queues with freelists and/or interrupts
# nethctrl = 64K Ethernet or ctrl egress queues
# neq = 64K egress queues of all kinds, including freelists
# nexactf = 336 MPS TCAM entries, can oversubscribe.
#
[global]
rss_glb_config_mode = basicvirtual
rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp
sge_timer_value = 1, 5, 10, 50, 100, 200 # usecs
# enable TP_OUT_CONFIG.IPIDSPLITMODE
reg[0x7d04] = 0x00010000/0x00010000
# disable TP_PARA_REG3.RxFragEn
reg[0x7d6c] = 0x00000000/0x00007000
reg[0x7dc0] = 0x0e2f8849 # TP_SHIFT_CNT
filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
filterMask = protocol, fcoe
tp_pmrx = 36, 512
tp_pmrx_pagesize = 64K
# TP number of RX channels (0 = auto)
tp_nrxch = 0
tp_pmtx = 46, 512
tp_pmtx_pagesize = 64K
# TP number of TX channels (0 = auto)
tp_ntxch = 0
# TP OFLD MTUs
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
# cluster, lan, or wan.
tp_tcptuning = lan
# PFs 0-3. These get 8 MSI/8 MSI-X vectors each. VFs are supported by
# these 4 PFs only.
[function "0"]
nvf = 4
wx_caps = all
r_caps = all
nvi = 2
rssnvi = 2
niqflint = 4
nethctrl = 4
neq = 8
nexactf = 4
cmask = all
pmask = 0x1
[function "1"]
nvf = 4
wx_caps = all
r_caps = all
nvi = 2
rssnvi = 2
niqflint = 4
nethctrl = 4
neq = 8
nexactf = 4
cmask = all
pmask = 0x2
[function "2"]
nvf = 4
wx_caps = all
r_caps = all
nvi = 2
rssnvi = 2
niqflint = 4
nethctrl = 4
neq = 8
nexactf = 4
cmask = all
pmask = 0x4
[function "3"]
nvf = 4
wx_caps = all
r_caps = all
nvi = 2
rssnvi = 2
niqflint = 4
nethctrl = 4
neq = 8
nexactf = 4
cmask = all
pmask = 0x8
# PF4 is the resource-rich PF that the bus/nexus driver attaches to.
# It gets 32 MSI/128 MSI-X vectors.
[function "4"]
wx_caps = all
r_caps = all
nvi = 32
rssnvi = 8
niqflint = 512
nethctrl = 1024
neq = 2048
nexactf = 280
cmask = all
pmask = all
# driver will mask off features it won't use
protocol = ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu
tp_l2t = 4096
tp_ddp = 2
tp_ddp_iscsi = 2
tp_stag = 2
tp_pbl = 5
tp_rq = 7
# TCAM has 8K cells; each region must start at a multiple of 128 cell.
# Each entry in these categories takes 4 cells each. nhash will use the
# TCAM iff there is room left (that is, the rest don't add up to 2048).
nroute = 32
nclip = 32
nfilter = 1456
nserver = 512
nhash = 16384
# PF5 is the SCSI Controller PF. It gets 32 MSI/40 MSI-X vectors.
# Not used right now.
[function "5"]
nvi = 1
rssnvi = 0
# PF6 is the FCoE Controller PF. It gets 32 MSI/40 MSI-X vectors.
# Not used right now.
[function "6"]
nvi = 1
rssnvi = 0
# The following function, 1023, is not an actual PCIE function but is used to
# configure and reserve firmware internal resources that come from the global
# resource pool.
[function "1023"]
wx_caps = all
r_caps = all
nvi = 4
rssnvi = 0
cmask = all
pmask = all
nexactf = 8
nfilter = 16
# For Virtual functions, we only allow NIC functionality and we only allow
# access to one port (1 << PF). Note that because of limitations in the
# Scatter Gather Engine (SGE) hardware which checks writes to VF KDOORBELL
# and GTS registers, the number of Ingress and Egress Queues must be a power
# of 2.
#
[function "0/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 1
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x1
[function "1/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 1
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x2
[function "2/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 1
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x4
[function "3/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 1
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x8
# MPS has 192K buffer space for ingress packets from the wire as well as
# loopback path of the L2 switch.
[port "0"]
dcb = none
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
[port "1"]
dcb = none
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
[port "2"]
dcb = none
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
[port "3"]
dcb = none
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
[fini]
version = 0x1
checksum = 0xbec0621
#
# $FreeBSD$
#