1326 lines
37 KiB
C
1326 lines
37 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000,2001 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "pci.h"
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/sysctl.h>
|
|
#include <machine/stdarg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#ifdef __alpha__
|
|
#include <machine/md_var.h>
|
|
#endif
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
#include <dev/ata/atapi-all.h>
|
|
|
|
/* device structures */
|
|
static d_ioctl_t ataioctl;
|
|
static struct cdevsw ata_cdevsw = {
|
|
/* open */ nullopen,
|
|
/* close */ nullclose,
|
|
/* read */ noread,
|
|
/* write */ nowrite,
|
|
/* ioctl */ ataioctl,
|
|
/* poll */ nopoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ nostrategy,
|
|
/* name */ "ata",
|
|
/* maj */ 159,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ 0,
|
|
};
|
|
|
|
/* prototypes */
|
|
static void ata_boot_attach(void);
|
|
static void ata_intr(void *);
|
|
static int ata_getparam(struct ata_softc *, int, u_int8_t);
|
|
static int ata_service(struct ata_softc *);
|
|
static char *active2str(int);
|
|
static void bswap(int8_t *, int);
|
|
static void btrim(int8_t *, int);
|
|
static void bpack(int8_t *, int8_t *, int);
|
|
static void ata_change_mode(struct ata_softc *, int, int);
|
|
|
|
/* sysctl vars */
|
|
SYSCTL_NODE(_hw, OID_AUTO, ata, CTLFLAG_RD, 0, "ATA driver parameters");
|
|
|
|
/* global vars */
|
|
devclass_t ata_devclass;
|
|
|
|
/* local vars */
|
|
static struct intr_config_hook *ata_delayed_attach = NULL;
|
|
static MALLOC_DEFINE(M_ATA, "ATA generic", "ATA driver generic layer");
|
|
|
|
/* misc defines */
|
|
#define MASTER 0
|
|
#define SLAVE 1
|
|
|
|
int
|
|
ata_probe(device_t dev)
|
|
{
|
|
struct ata_softc *scp;
|
|
int rid;
|
|
|
|
if (!dev)
|
|
return ENXIO;
|
|
scp = device_get_softc(dev);
|
|
if (!scp)
|
|
return ENXIO;
|
|
if (scp->r_io || scp->r_altio || scp->r_irq)
|
|
return EEXIST;
|
|
|
|
/* initialize the softc basics */
|
|
scp->active = ATA_IDLE;
|
|
scp->dev = dev;
|
|
|
|
rid = ATA_IOADDR_RID;
|
|
scp->r_io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
|
|
ATA_IOSIZE, RF_ACTIVE);
|
|
if (!scp->r_io)
|
|
goto failure;
|
|
|
|
rid = ATA_ALTADDR_RID;
|
|
scp->r_altio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
|
|
ATA_ALTIOSIZE, RF_ACTIVE);
|
|
if (!scp->r_altio)
|
|
goto failure;
|
|
|
|
rid = ATA_BMADDR_RID;
|
|
scp->r_bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
|
|
ATA_BMIOSIZE, RF_ACTIVE);
|
|
if (bootverbose)
|
|
ata_printf(scp, -1, "iobase=0x%04x altiobase=0x%04x bmaddr=0x%04x\n",
|
|
(int)rman_get_start(scp->r_io),
|
|
(int)rman_get_start(scp->r_altio),
|
|
(scp->r_bmio) ? (int)rman_get_start(scp->r_bmio) : 0);
|
|
|
|
ata_reset(scp);
|
|
|
|
TAILQ_INIT(&scp->ata_queue);
|
|
TAILQ_INIT(&scp->atapi_queue);
|
|
return 0;
|
|
|
|
failure:
|
|
if (scp->r_io)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, scp->r_io);
|
|
if (scp->r_altio)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID,scp->r_altio);
|
|
if (scp->r_bmio)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_BMADDR_RID, scp->r_bmio);
|
|
if (bootverbose)
|
|
ata_printf(scp, -1, "probe allocation failed\n");
|
|
return ENXIO;
|
|
}
|
|
|
|
int
|
|
ata_attach(device_t dev)
|
|
{
|
|
struct ata_softc *scp;
|
|
int error, rid;
|
|
|
|
if (!dev)
|
|
return ENXIO;
|
|
scp = device_get_softc(dev);
|
|
if (!scp)
|
|
return ENXIO;
|
|
|
|
rid = ATA_IRQ_RID;
|
|
scp->r_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (!scp->r_irq) {
|
|
ata_printf(scp, -1, "unable to allocate interrupt\n");
|
|
return ENXIO;
|
|
}
|
|
if ((error = bus_setup_intr(dev, scp->r_irq, INTR_TYPE_BIO|INTR_ENTROPY,
|
|
ata_intr, scp, &scp->ih)))
|
|
return error;
|
|
|
|
/*
|
|
* do not attach devices if we are in early boot, this is done later
|
|
* when interrupts are enabled by a hook into the boot process.
|
|
* otherwise attach what the probe has found in scp->devices.
|
|
*/
|
|
if (!ata_delayed_attach) {
|
|
if (scp->devices & ATA_ATA_SLAVE)
|
|
if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY))
|
|
scp->devices &= ~ATA_ATA_SLAVE;
|
|
if (scp->devices & ATA_ATAPI_SLAVE)
|
|
if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY))
|
|
scp->devices &= ~ATA_ATAPI_SLAVE;
|
|
if (scp->devices & ATA_ATA_MASTER)
|
|
if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY))
|
|
scp->devices &= ~ATA_ATA_MASTER;
|
|
if (scp->devices & ATA_ATAPI_MASTER)
|
|
if (ata_getparam(scp, ATA_MASTER,ATA_C_ATAPI_IDENTIFY))
|
|
scp->devices &= ~ATA_ATAPI_MASTER;
|
|
#ifdef DEV_ATADISK
|
|
if (scp->devices & ATA_ATA_MASTER)
|
|
ad_attach(scp, ATA_MASTER);
|
|
if (scp->devices & ATA_ATA_SLAVE)
|
|
ad_attach(scp, ATA_SLAVE);
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
if (scp->devices & ATA_ATAPI_MASTER)
|
|
atapi_attach(scp, ATA_MASTER);
|
|
if (scp->devices & ATA_ATAPI_SLAVE)
|
|
atapi_attach(scp, ATA_SLAVE);
|
|
#endif
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_detach(device_t dev)
|
|
{
|
|
struct ata_softc *scp;
|
|
int s;
|
|
|
|
if (!dev)
|
|
return ENXIO;
|
|
scp = device_get_softc(dev);
|
|
if (!scp || !scp->devices)
|
|
return ENXIO;
|
|
|
|
/* make sure channel is not busy SOS XXX */
|
|
s = splbio();
|
|
while (!atomic_cmpset_int(&scp->active, ATA_IDLE, ATA_CONTROL))
|
|
tsleep((caddr_t)&s, PRIBIO, "atachm", hz/4);
|
|
splx(s);
|
|
|
|
/* disable interrupts on devices */
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_IDS | ATA_A_4BIT);
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE);
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_IDS | ATA_A_4BIT);
|
|
|
|
#ifdef DEV_ATADISK
|
|
if (scp->devices & ATA_ATA_MASTER && scp->dev_softc[MASTER])
|
|
ad_detach(scp->dev_softc[MASTER], 1);
|
|
if (scp->devices & ATA_ATA_SLAVE && scp->dev_softc[SLAVE])
|
|
ad_detach(scp->dev_softc[SLAVE], 1);
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
if (scp->devices & ATA_ATAPI_MASTER && scp->dev_softc[MASTER])
|
|
atapi_detach(scp->dev_softc[MASTER]);
|
|
if (scp->devices & ATA_ATAPI_SLAVE && scp->dev_softc[SLAVE])
|
|
atapi_detach(scp->dev_softc[SLAVE]);
|
|
#endif
|
|
|
|
if (scp->dev_param[MASTER]) {
|
|
free(scp->dev_param[MASTER], M_ATA);
|
|
scp->dev_param[MASTER] = NULL;
|
|
}
|
|
if (scp->dev_param[SLAVE]) {
|
|
free(scp->dev_param[SLAVE], M_ATA);
|
|
scp->dev_param[SLAVE] = NULL;
|
|
}
|
|
scp->dev_softc[MASTER] = NULL;
|
|
scp->dev_softc[SLAVE] = NULL;
|
|
scp->mode[MASTER] = ATA_PIO;
|
|
scp->mode[SLAVE] = ATA_PIO;
|
|
scp->devices = 0;
|
|
|
|
bus_teardown_intr(dev, scp->r_irq, scp->ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, scp->r_irq);
|
|
if (scp->r_bmio)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_BMADDR_RID, scp->r_bmio);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, scp->r_altio);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, scp->r_io);
|
|
scp->r_io = NULL;
|
|
scp->r_altio = NULL;
|
|
scp->r_bmio = NULL;
|
|
scp->r_irq = NULL;
|
|
scp->active = ATA_IDLE;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_resume(device_t dev)
|
|
{
|
|
struct ata_softc *scp = device_get_softc(dev);
|
|
|
|
ata_reinit(scp);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ataioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, struct thread *td)
|
|
{
|
|
struct ata_cmd *iocmd = (struct ata_cmd *)addr;
|
|
device_t device;
|
|
int error;
|
|
|
|
if (cmd != IOCATA)
|
|
return ENOTTY;
|
|
|
|
if (iocmd->channel >= devclass_get_maxunit(ata_devclass))
|
|
return ENXIO;
|
|
|
|
if (!(device = devclass_get_device(ata_devclass, iocmd->channel)))
|
|
return ENODEV;
|
|
|
|
switch (iocmd->cmd) {
|
|
case ATAATTACH: {
|
|
/* should enable channel HW on controller that can SOS XXX */
|
|
error = ata_probe(device);
|
|
if (!error)
|
|
error = ata_attach(device);
|
|
return error;
|
|
}
|
|
|
|
case ATADETACH: {
|
|
error = ata_detach(device);
|
|
/* should disable channel HW on controller that can SOS XXX */
|
|
return error;
|
|
}
|
|
|
|
case ATAREINIT: {
|
|
struct ata_softc *scp;
|
|
int s;
|
|
|
|
scp = device_get_softc(device);
|
|
if (!scp)
|
|
return ENODEV;
|
|
|
|
/* make sure channel is not busy SOS XXX */
|
|
s = splbio();
|
|
while (!atomic_cmpset_int(&scp->active, ATA_IDLE, ATA_ACTIVE))
|
|
tsleep((caddr_t)&s, PRIBIO, "atachm", hz/4);
|
|
error = ata_reinit(scp);
|
|
splx(s);
|
|
return error;
|
|
}
|
|
|
|
case ATAGMODE: {
|
|
struct ata_softc *scp;
|
|
|
|
scp = device_get_softc(device);
|
|
if (!scp)
|
|
return ENODEV;
|
|
if (scp->dev_param[MASTER])
|
|
iocmd->u.mode.mode[MASTER] = scp->mode[MASTER];
|
|
else
|
|
iocmd->u.mode.mode[MASTER] = -1;
|
|
if (scp->dev_param[SLAVE])
|
|
iocmd->u.mode.mode[SLAVE] = scp->mode[SLAVE];
|
|
else
|
|
iocmd->u.mode.mode[SLAVE] = -1;
|
|
return 0;
|
|
}
|
|
|
|
case ATASMODE: {
|
|
struct ata_softc *scp;
|
|
|
|
scp = device_get_softc(device);
|
|
if (!scp)
|
|
return ENODEV;
|
|
if (scp->dev_param[MASTER] && iocmd->u.mode.mode[MASTER] >= 0) {
|
|
ata_change_mode(scp, ATA_MASTER, iocmd->u.mode.mode[MASTER]);
|
|
iocmd->u.mode.mode[MASTER] = scp->mode[MASTER];
|
|
}
|
|
else
|
|
iocmd->u.mode.mode[MASTER] = -1;
|
|
|
|
if (scp->dev_param[SLAVE] && iocmd->u.mode.mode[SLAVE] >= 0) {
|
|
ata_change_mode(scp, ATA_SLAVE, iocmd->u.mode.mode[SLAVE]);
|
|
iocmd->u.mode.mode[SLAVE] = scp->mode[SLAVE];
|
|
}
|
|
else
|
|
iocmd->u.mode.mode[SLAVE] = -1;
|
|
return 0;
|
|
}
|
|
|
|
case ATAGPARM: {
|
|
struct ata_softc *scp;
|
|
|
|
scp = device_get_softc(device);
|
|
if (!scp)
|
|
return ENODEV;
|
|
|
|
iocmd->u.param.type[MASTER] =
|
|
scp->devices & (ATA_ATA_MASTER | ATA_ATAPI_MASTER);
|
|
iocmd->u.param.type[SLAVE] =
|
|
scp->devices & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE);
|
|
|
|
if (scp->dev_name[MASTER])
|
|
strcpy(iocmd->u.param.name[MASTER], scp->dev_name[MASTER]);
|
|
if (scp->dev_name[SLAVE])
|
|
strcpy(iocmd->u.param.name[SLAVE], scp->dev_name[SLAVE]);
|
|
|
|
if (scp->dev_param[MASTER])
|
|
bcopy(scp->dev_param[MASTER], &iocmd->u.param.params[MASTER],
|
|
sizeof(struct ata_params));
|
|
if (scp->dev_param[SLAVE])
|
|
bcopy(scp->dev_param[SLAVE], &iocmd->u.param.params[SLAVE],
|
|
sizeof(struct ata_params));
|
|
return 0;
|
|
}
|
|
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
case ATAPICMD: {
|
|
struct ata_softc *scp;
|
|
struct atapi_softc *atp;
|
|
caddr_t buf;
|
|
|
|
scp = device_get_softc(device);
|
|
if (!scp)
|
|
return ENODEV;
|
|
|
|
if (!scp->dev_softc[iocmd->device] ||
|
|
!(scp->devices &
|
|
(iocmd->device == 0 ? ATA_ATAPI_MASTER : ATA_ATAPI_SLAVE)))
|
|
return ENODEV;
|
|
|
|
if (!(buf = malloc(iocmd->u.atapi.count, M_ATA, M_NOWAIT)))
|
|
return ENOMEM;
|
|
|
|
atp = scp->dev_softc[iocmd->device];
|
|
if (iocmd->u.atapi.flags & ATAPI_CMD_WRITE) {
|
|
error = copyin(iocmd->u.atapi.data, buf, iocmd->u.atapi.count);
|
|
if (error)
|
|
return error;
|
|
}
|
|
error = atapi_queue_cmd(atp, iocmd->u.atapi.ccb,
|
|
buf, iocmd->u.atapi.count,
|
|
(iocmd->u.atapi.flags == ATAPI_CMD_READ ?
|
|
ATPR_F_READ : 0) | ATPR_F_QUIET,
|
|
iocmd->u.atapi.timeout, NULL, NULL);
|
|
if (error) {
|
|
iocmd->u.atapi.error = error;
|
|
bcopy(&atp->sense, iocmd->u.atapi.sense_data,
|
|
sizeof(struct atapi_reqsense));
|
|
error = 0;
|
|
}
|
|
else if (iocmd->u.atapi.flags & ATAPI_CMD_READ)
|
|
error = copyout(buf, iocmd->u.atapi.data, iocmd->u.atapi.count);
|
|
|
|
free(buf, M_ATA);
|
|
return error;
|
|
}
|
|
#endif
|
|
}
|
|
return ENOTTY;
|
|
}
|
|
|
|
static int
|
|
ata_getparam(struct ata_softc *scp, int device, u_int8_t command)
|
|
{
|
|
struct ata_params *ata_parm;
|
|
int retry = 0;
|
|
|
|
/* select drive */
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | device);
|
|
DELAY(1);
|
|
|
|
/* enable interrupt */
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_4BIT);
|
|
DELAY(1);
|
|
|
|
/* apparently some devices needs this repeated */
|
|
do {
|
|
if (ata_command(scp, device, command, 0, 0, 0, 0, 0, ATA_WAIT_INTR)) {
|
|
ata_printf(scp, device, "%s identify failed\n",
|
|
command == ATA_C_ATAPI_IDENTIFY ? "ATAPI" : "ATA");
|
|
return -1;
|
|
}
|
|
if (retry++ > 4) {
|
|
ata_printf(scp, device, "%s identify retries exceeded\n",
|
|
command == ATA_C_ATAPI_IDENTIFY ? "ATAPI" : "ATA");
|
|
return -1;
|
|
}
|
|
} while (ata_wait(scp, device,
|
|
((command == ATA_C_ATAPI_IDENTIFY) ?
|
|
ATA_S_DRQ : (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ))));
|
|
|
|
ata_parm = malloc(sizeof(struct ata_params), M_ATA, M_NOWAIT);
|
|
if (!ata_parm) {
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(struct ata_params)/sizeof(int16_t); i++)
|
|
ATA_INW(scp->r_io, ATA_DATA);
|
|
ata_printf(scp, device, "malloc for identify data failed\n");
|
|
return -1;
|
|
}
|
|
|
|
ATA_INSW(scp->r_io, ATA_DATA, (int16_t *)ata_parm,
|
|
sizeof(struct ata_params)/sizeof(int16_t));
|
|
|
|
if (command == ATA_C_ATA_IDENTIFY ||
|
|
!((ata_parm->model[0] == 'N' && ata_parm->model[1] == 'E') ||
|
|
(ata_parm->model[0] == 'F' && ata_parm->model[1] == 'X')))
|
|
bswap(ata_parm->model, sizeof(ata_parm->model));
|
|
btrim(ata_parm->model, sizeof(ata_parm->model));
|
|
bpack(ata_parm->model, ata_parm->model, sizeof(ata_parm->model));
|
|
bswap(ata_parm->revision, sizeof(ata_parm->revision));
|
|
btrim(ata_parm->revision, sizeof(ata_parm->revision));
|
|
bpack(ata_parm->revision, ata_parm->revision, sizeof(ata_parm->revision));
|
|
scp->dev_param[ATA_DEV(device)] = ata_parm;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ata_boot_attach(void)
|
|
{
|
|
struct ata_softc *scp;
|
|
int ctlr;
|
|
|
|
/*
|
|
* run through all ata devices and look for real ATA & ATAPI devices
|
|
* using the hints we found in the early probe, this avoids some of
|
|
* the delays probing of non-exsistent devices can cause.
|
|
*/
|
|
for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) {
|
|
if (!(scp = devclass_get_softc(ata_devclass, ctlr)))
|
|
continue;
|
|
if (scp->devices & ATA_ATA_SLAVE)
|
|
if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY))
|
|
scp->devices &= ~ATA_ATA_SLAVE;
|
|
if (scp->devices & ATA_ATAPI_SLAVE)
|
|
if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY))
|
|
scp->devices &= ~ATA_ATAPI_SLAVE;
|
|
if (scp->devices & ATA_ATA_MASTER)
|
|
if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY))
|
|
scp->devices &= ~ATA_ATA_MASTER;
|
|
if (scp->devices & ATA_ATAPI_MASTER)
|
|
if (ata_getparam(scp, ATA_MASTER, ATA_C_ATAPI_IDENTIFY))
|
|
scp->devices &= ~ATA_ATAPI_MASTER;
|
|
}
|
|
|
|
#ifdef DEV_ATADISK
|
|
/* now we know whats there, do the real attach, first the ATA disks */
|
|
for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) {
|
|
if (!(scp = devclass_get_softc(ata_devclass, ctlr)))
|
|
continue;
|
|
if (scp->devices & ATA_ATA_MASTER)
|
|
ad_attach(scp, ATA_MASTER);
|
|
if (scp->devices & ATA_ATA_SLAVE)
|
|
ad_attach(scp, ATA_SLAVE);
|
|
}
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
/* then the atapi devices */
|
|
for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) {
|
|
if (!(scp = devclass_get_softc(ata_devclass, ctlr)))
|
|
continue;
|
|
if (scp->devices & ATA_ATAPI_MASTER)
|
|
atapi_attach(scp, ATA_MASTER);
|
|
if (scp->devices & ATA_ATAPI_SLAVE)
|
|
atapi_attach(scp, ATA_SLAVE);
|
|
}
|
|
#endif
|
|
if (ata_delayed_attach) {
|
|
config_intrhook_disestablish(ata_delayed_attach);
|
|
free(ata_delayed_attach, M_ATA);
|
|
ata_delayed_attach = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ata_intr(void *data)
|
|
{
|
|
struct ata_softc *scp = (struct ata_softc *)data;
|
|
|
|
/*
|
|
* on PCI systems we might share an interrupt line with another
|
|
* device or our twin ATA channel, so call scp->intr_func to figure
|
|
* out if it is really an interrupt we should process here
|
|
*/
|
|
if (scp->intr_func && scp->intr_func(scp))
|
|
return;
|
|
|
|
/* if drive is busy it didn't interrupt */
|
|
if (ATA_INB(scp->r_altio, ATA_ALTSTAT) & ATA_S_BUSY) {
|
|
DELAY(100);
|
|
if (!(ATA_INB(scp->r_altio, ATA_ALTSTAT) & ATA_S_DRQ))
|
|
return;
|
|
}
|
|
|
|
/* clear interrupt and get status */
|
|
scp->status = ATA_INB(scp->r_io, ATA_STATUS);
|
|
|
|
if (scp->status & ATA_S_ERROR)
|
|
scp->error = ATA_INB(scp->r_io, ATA_ERROR);
|
|
|
|
/* find & call the responsible driver to process this interrupt */
|
|
switch (scp->active) {
|
|
#ifdef DEV_ATADISK
|
|
case ATA_ACTIVE_ATA:
|
|
if (!scp->running || ad_interrupt(scp->running) == ATA_OP_CONTINUES)
|
|
return;
|
|
break;
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
case ATA_ACTIVE_ATAPI:
|
|
if (!scp->running || atapi_interrupt(scp->running) == ATA_OP_CONTINUES)
|
|
return;
|
|
break;
|
|
#endif
|
|
case ATA_WAIT_INTR:
|
|
case ATA_WAIT_INTR | ATA_CONTROL:
|
|
wakeup((caddr_t)scp);
|
|
break;
|
|
|
|
case ATA_WAIT_READY:
|
|
case ATA_WAIT_READY | ATA_CONTROL:
|
|
break;
|
|
|
|
case ATA_IDLE:
|
|
if (scp->flags & ATA_QUEUED) {
|
|
scp->active = ATA_ACTIVE; /* XXX */
|
|
if (ata_service(scp) == ATA_OP_CONTINUES)
|
|
return;
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
default:
|
|
#ifdef ATA_DEBUG
|
|
{
|
|
static int intr_count = 0;
|
|
|
|
if (intr_count++ < 10)
|
|
ata_printf(scp, -1, "unwanted interrupt %d %sstatus = %02x\n",
|
|
intr_count, active2str(scp->active), scp->status);
|
|
}
|
|
#endif
|
|
}
|
|
scp->active &= ATA_CONTROL;
|
|
if (scp->active & ATA_CONTROL)
|
|
return;
|
|
scp->running = NULL;
|
|
ata_start(scp);
|
|
return;
|
|
}
|
|
|
|
void
|
|
ata_start(struct ata_softc *scp)
|
|
{
|
|
#ifdef DEV_ATADISK
|
|
struct ad_request *ad_request;
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
struct atapi_request *atapi_request;
|
|
#endif
|
|
|
|
if (!atomic_cmpset_int(&scp->active, ATA_IDLE, ATA_ACTIVE))
|
|
return;
|
|
|
|
#ifdef DEV_ATADISK
|
|
/* find & call the responsible driver if anything on the ATA queue */
|
|
if (TAILQ_EMPTY(&scp->ata_queue)) {
|
|
if (scp->devices & (ATA_ATA_MASTER) && scp->dev_softc[MASTER])
|
|
ad_start((struct ad_softc *)scp->dev_softc[MASTER]);
|
|
if (scp->devices & (ATA_ATA_SLAVE) && scp->dev_softc[SLAVE])
|
|
ad_start((struct ad_softc *)scp->dev_softc[SLAVE]);
|
|
}
|
|
if ((ad_request = TAILQ_FIRST(&scp->ata_queue))) {
|
|
TAILQ_REMOVE(&scp->ata_queue, ad_request, chain);
|
|
scp->active = ATA_ACTIVE_ATA;
|
|
scp->running = ad_request;
|
|
if (ad_transfer(ad_request) == ATA_OP_CONTINUES)
|
|
return;
|
|
}
|
|
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
/* find & call the responsible driver if anything on the ATAPI queue */
|
|
if (TAILQ_EMPTY(&scp->atapi_queue)) {
|
|
if (scp->devices & (ATA_ATAPI_MASTER) && scp->dev_softc[MASTER])
|
|
atapi_start((struct atapi_softc *)scp->dev_softc[MASTER]);
|
|
if (scp->devices & (ATA_ATAPI_SLAVE) && scp->dev_softc[SLAVE])
|
|
atapi_start((struct atapi_softc *)scp->dev_softc[SLAVE]);
|
|
}
|
|
if ((atapi_request = TAILQ_FIRST(&scp->atapi_queue))) {
|
|
TAILQ_REMOVE(&scp->atapi_queue, atapi_request, chain);
|
|
scp->active = ATA_ACTIVE_ATAPI;
|
|
scp->running = atapi_request;
|
|
if (atapi_transfer(atapi_request) == ATA_OP_CONTINUES)
|
|
return;
|
|
}
|
|
#endif
|
|
scp->active = ATA_IDLE;
|
|
}
|
|
|
|
void
|
|
ata_reset(struct ata_softc *scp)
|
|
{
|
|
u_int8_t lsb, msb, ostat0, ostat1;
|
|
u_int8_t stat0 = ATA_S_BUSY, stat1 = ATA_S_BUSY;
|
|
int mask = 0, timeout;
|
|
|
|
/* do we have any signs of ATA/ATAPI HW being present ? */
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
ostat0 = ATA_INB(scp->r_io, ATA_STATUS);
|
|
if ((ostat0 & 0xf8) != 0xf8 && ostat0 != 0xa5)
|
|
mask |= 0x01;
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE);
|
|
DELAY(10);
|
|
ostat1 = ATA_INB(scp->r_io, ATA_STATUS);
|
|
if ((ostat1 & 0xf8) != 0xf8 && ostat1 != 0xa5)
|
|
mask |= 0x02;
|
|
|
|
scp->devices = 0;
|
|
if (!mask)
|
|
return;
|
|
|
|
/* in some setups we dont want to test for a slave */
|
|
if (scp->flags & ATA_NO_SLAVE)
|
|
mask &= ~0x02;
|
|
|
|
if (bootverbose)
|
|
ata_printf(scp, -1, "mask=%02x ostat0=%02x ostat2=%02x\n",
|
|
mask, ostat0, ostat1);
|
|
|
|
/* reset channel */
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_IDS | ATA_A_RESET);
|
|
DELAY(10000);
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_IDS);
|
|
DELAY(100000);
|
|
ATA_INB(scp->r_io, ATA_ERROR);
|
|
|
|
/* wait for BUSY to go inactive */
|
|
for (timeout = 0; timeout < 310000; timeout++) {
|
|
if (stat0 & ATA_S_BUSY) {
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
stat0 = ATA_INB(scp->r_io, ATA_STATUS);
|
|
if (!(stat0 & ATA_S_BUSY)) {
|
|
/* check for ATAPI signature while its still there */
|
|
lsb = ATA_INB(scp->r_io, ATA_CYL_LSB);
|
|
msb = ATA_INB(scp->r_io, ATA_CYL_MSB);
|
|
if (bootverbose)
|
|
ata_printf(scp, ATA_MASTER,
|
|
"ATAPI probe %02x %02x\n", lsb, msb);
|
|
if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB)
|
|
scp->devices |= ATA_ATAPI_MASTER;
|
|
}
|
|
}
|
|
if (stat1 & ATA_S_BUSY) {
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE);
|
|
DELAY(10);
|
|
stat1 = ATA_INB(scp->r_io, ATA_STATUS);
|
|
if (!(stat1 & ATA_S_BUSY)) {
|
|
/* check for ATAPI signature while its still there */
|
|
lsb = ATA_INB(scp->r_io, ATA_CYL_LSB);
|
|
msb = ATA_INB(scp->r_io, ATA_CYL_MSB);
|
|
if (bootverbose)
|
|
ata_printf(scp, ATA_SLAVE,
|
|
"ATAPI probe %02x %02x\n", lsb, msb);
|
|
if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB)
|
|
scp->devices |= ATA_ATAPI_SLAVE;
|
|
}
|
|
}
|
|
if (mask == 0x01) /* wait for master only */
|
|
if (!(stat0 & ATA_S_BUSY))
|
|
break;
|
|
if (mask == 0x02) /* wait for slave only */
|
|
if (!(stat1 & ATA_S_BUSY))
|
|
break;
|
|
if (mask == 0x03) /* wait for both master & slave */
|
|
if (!(stat0 & ATA_S_BUSY) && !(stat1 & ATA_S_BUSY))
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
DELAY(10);
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_4BIT);
|
|
|
|
if (stat0 & ATA_S_BUSY)
|
|
mask &= ~0x01;
|
|
if (stat1 & ATA_S_BUSY)
|
|
mask &= ~0x02;
|
|
if (bootverbose)
|
|
ata_printf(scp, -1, "mask=%02x stat0=%02x stat1=%02x\n",
|
|
mask, stat0, stat1);
|
|
if (!mask)
|
|
return;
|
|
|
|
if (mask & 0x01 && ostat0 != 0x00 && !(scp->devices & ATA_ATAPI_MASTER)) {
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
ATA_OUTB(scp->r_io, ATA_ERROR, 0x58);
|
|
ATA_OUTB(scp->r_io, ATA_CYL_LSB, 0xa5);
|
|
lsb = ATA_INB(scp->r_io, ATA_ERROR);
|
|
msb = ATA_INB(scp->r_io, ATA_CYL_LSB);
|
|
if (bootverbose)
|
|
ata_printf(scp, ATA_MASTER, "ATA probe %02x %02x\n", lsb, msb);
|
|
if (lsb != 0x58 && msb == 0xa5)
|
|
scp->devices |= ATA_ATA_MASTER;
|
|
}
|
|
if (mask & 0x02 && ostat1 != 0x00 && !(scp->devices & ATA_ATAPI_SLAVE)) {
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE);
|
|
DELAY(10);
|
|
ATA_OUTB(scp->r_io, ATA_ERROR, 0x58);
|
|
ATA_OUTB(scp->r_io, ATA_CYL_LSB, 0xa5);
|
|
lsb = ATA_INB(scp->r_io, ATA_ERROR);
|
|
msb = ATA_INB(scp->r_io, ATA_CYL_LSB);
|
|
if (bootverbose)
|
|
ata_printf(scp, ATA_SLAVE, "ATA probe %02x %02x\n", lsb, msb);
|
|
if (lsb != 0x58 && msb == 0xa5)
|
|
scp->devices |= ATA_ATA_SLAVE;
|
|
}
|
|
if (bootverbose)
|
|
ata_printf(scp, -1, "devices=%02x\n", scp->devices);
|
|
}
|
|
|
|
int
|
|
ata_reinit(struct ata_softc *scp)
|
|
{
|
|
int devices, misdev, newdev;
|
|
|
|
if (!scp->r_io || !scp->r_altio || !scp->r_irq)
|
|
return ENXIO;
|
|
scp->active = ATA_CONTROL;
|
|
scp->running = NULL;
|
|
devices = scp->devices;
|
|
ata_printf(scp, -1, "resetting devices .. ");
|
|
ata_reset(scp);
|
|
|
|
if ((misdev = devices & ~scp->devices)) {
|
|
if (misdev)
|
|
printf("\n");
|
|
#ifdef DEV_ATADISK
|
|
if (misdev & ATA_ATA_MASTER && scp->dev_softc[MASTER])
|
|
ad_detach(scp->dev_softc[MASTER], 0);
|
|
if (misdev & ATA_ATA_SLAVE && scp->dev_softc[SLAVE])
|
|
ad_detach(scp->dev_softc[SLAVE], 0);
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
if (misdev & ATA_ATAPI_MASTER && scp->dev_softc[MASTER])
|
|
atapi_detach(scp->dev_softc[MASTER]);
|
|
if (misdev & ATA_ATAPI_SLAVE && scp->dev_softc[SLAVE])
|
|
atapi_detach(scp->dev_softc[SLAVE]);
|
|
#endif
|
|
if (misdev & ATA_ATA_MASTER || misdev & ATA_ATAPI_MASTER) {
|
|
free(scp->dev_param[MASTER], M_ATA);
|
|
scp->dev_param[MASTER] = NULL;
|
|
}
|
|
if (misdev & ATA_ATA_SLAVE || misdev & ATA_ATAPI_SLAVE) {
|
|
free(scp->dev_param[SLAVE], M_ATA);
|
|
scp->dev_param[SLAVE] = NULL;
|
|
}
|
|
}
|
|
if ((newdev = ~devices & scp->devices)) {
|
|
if (newdev & ATA_ATA_MASTER)
|
|
if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY))
|
|
newdev &= ~ATA_ATA_MASTER;
|
|
if (newdev & ATA_ATA_SLAVE)
|
|
if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY))
|
|
newdev &= ~ATA_ATA_SLAVE;
|
|
if (newdev & ATA_ATAPI_MASTER)
|
|
if (ata_getparam(scp, ATA_MASTER, ATA_C_ATAPI_IDENTIFY))
|
|
newdev &= ~ATA_ATAPI_MASTER;
|
|
if (newdev & ATA_ATAPI_SLAVE)
|
|
if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY))
|
|
newdev &= ~ATA_ATAPI_SLAVE;
|
|
}
|
|
if (!misdev && newdev)
|
|
printf("\n");
|
|
#ifdef DEV_ATADISK
|
|
if (newdev & ATA_ATA_MASTER && !scp->dev_softc[MASTER])
|
|
ad_attach(scp, ATA_MASTER);
|
|
else if (scp->devices & ATA_ATA_MASTER && scp->dev_softc[MASTER])
|
|
ad_reinit((struct ad_softc *)scp->dev_softc[MASTER]);
|
|
if (newdev & ATA_ATA_SLAVE && !scp->dev_softc[SLAVE])
|
|
ad_attach(scp, ATA_SLAVE);
|
|
else if (scp->devices & (ATA_ATA_SLAVE) && scp->dev_softc[SLAVE])
|
|
ad_reinit((struct ad_softc *)scp->dev_softc[SLAVE]);
|
|
#endif
|
|
#if defined(DEV_ATAPICD) || defined(DEV_ATAPIFD) || defined(DEV_ATAPIST)
|
|
if (newdev & ATA_ATAPI_MASTER && !scp->dev_softc[MASTER])
|
|
atapi_attach(scp, ATA_MASTER);
|
|
else if (scp->devices & (ATA_ATAPI_MASTER) && scp->dev_softc[MASTER])
|
|
atapi_reinit((struct atapi_softc *)scp->dev_softc[MASTER]);
|
|
if (newdev & ATA_ATAPI_SLAVE && !scp->dev_softc[SLAVE])
|
|
atapi_attach(scp, ATA_SLAVE);
|
|
else if (scp->devices & (ATA_ATAPI_SLAVE) && scp->dev_softc[SLAVE])
|
|
atapi_reinit((struct atapi_softc *)scp->dev_softc[SLAVE]);
|
|
#endif
|
|
printf("done\n");
|
|
scp->active = ATA_IDLE;
|
|
ata_start(scp);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_service(struct ata_softc *scp)
|
|
{
|
|
/* do we have a SERVICE request from the drive ? */
|
|
if ((scp->status & (ATA_S_SERVICE|ATA_S_ERROR|ATA_S_DRQ)) == ATA_S_SERVICE){
|
|
ATA_OUTB(scp->r_bmio, ATA_BMSTAT_PORT,
|
|
ata_dmastatus(scp) | ATA_BMSTAT_INTERRUPT);
|
|
#ifdef DEV_ATADISK
|
|
if ((ATA_INB(scp->r_io, ATA_DRIVE) & ATA_SLAVE) == ATA_MASTER) {
|
|
if ((scp->devices & ATA_ATA_MASTER) && scp->dev_softc[MASTER])
|
|
return ad_service((struct ad_softc *)scp->dev_softc[MASTER], 0);
|
|
}
|
|
else {
|
|
if ((scp->devices & ATA_ATA_SLAVE) && scp->dev_softc[SLAVE])
|
|
return ad_service((struct ad_softc *)scp->dev_softc[SLAVE], 0);
|
|
}
|
|
#endif
|
|
}
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
int
|
|
ata_wait(struct ata_softc *scp, int device, u_int8_t mask)
|
|
{
|
|
int timeout = 0;
|
|
|
|
DELAY(1);
|
|
while (timeout < 5000000) { /* timeout 5 secs */
|
|
scp->status = ATA_INB(scp->r_io, ATA_STATUS);
|
|
|
|
/* if drive fails status, reselect the drive just to be sure */
|
|
if (scp->status == 0xff) {
|
|
ata_printf(scp, device, "no status, reselecting device\n");
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | device);
|
|
DELAY(10);
|
|
scp->status = ATA_INB(scp->r_io, ATA_STATUS);
|
|
if (scp->status == 0xff)
|
|
return -1;
|
|
}
|
|
|
|
/* are we done ? */
|
|
if (!(scp->status & ATA_S_BUSY))
|
|
break;
|
|
|
|
if (timeout > 1000) {
|
|
timeout += 1000;
|
|
DELAY(1000);
|
|
}
|
|
else {
|
|
timeout += 10;
|
|
DELAY(10);
|
|
}
|
|
}
|
|
if (scp->status & ATA_S_ERROR)
|
|
scp->error = ATA_INB(scp->r_io, ATA_ERROR);
|
|
if (timeout >= 5000000)
|
|
return -1;
|
|
if (!mask)
|
|
return (scp->status & ATA_S_ERROR);
|
|
|
|
/* Wait 50 msec for bits wanted. */
|
|
timeout = 5000;
|
|
while (timeout--) {
|
|
scp->status = ATA_INB(scp->r_io, ATA_STATUS);
|
|
if ((scp->status & mask) == mask) {
|
|
if (scp->status & ATA_S_ERROR)
|
|
scp->error = ATA_INB(scp->r_io, ATA_ERROR);
|
|
return (scp->status & ATA_S_ERROR);
|
|
}
|
|
DELAY (10);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
ata_command(struct ata_softc *scp, int device, u_int8_t command,
|
|
u_int16_t cylinder, u_int8_t head, u_int8_t sector,
|
|
u_int8_t count, u_int8_t feature, int flags)
|
|
{
|
|
int error = 0;
|
|
#ifdef ATA_DEBUG
|
|
ata_printf(scp, device, "ata_command: addr=%04x, cmd=%02x, "
|
|
"c=%d, h=%d, s=%d, count=%d, feature=%d, flags=%02x\n",
|
|
rman_get_start(scp->r_io), command, cylinder, head, sector,
|
|
count, feature, flags);
|
|
|
|
/* sanity checks */
|
|
switch(scp->active) {
|
|
case ATA_IDLE:
|
|
break;
|
|
|
|
case ATA_CONTROL:
|
|
if (flags == ATA_WAIT_INTR || flags == ATA_WAIT_READY)
|
|
break;
|
|
goto out;
|
|
|
|
case ATA_ACTIVE_ATA:
|
|
case ATA_ACTIVE_ATAPI:
|
|
if (flags == ATA_IMMEDIATE)
|
|
break;
|
|
|
|
default:
|
|
out:
|
|
printf("ata_command called %s flags=%s cmd=%02x\n",
|
|
active2str(scp->active), active2str(flags), command);
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
/* disable interrupt from device */
|
|
if (scp->flags & ATA_QUEUED)
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_IDS | ATA_A_4BIT);
|
|
|
|
/* select device */
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | device);
|
|
|
|
/* ready to issue command ? */
|
|
if (ata_wait(scp, device, 0) < 0) {
|
|
ata_printf(scp, device,
|
|
"timeout waiting to give command=%02x s=%02x e=%02x\n",
|
|
command, scp->status, scp->error);
|
|
return -1;
|
|
}
|
|
|
|
ATA_OUTB(scp->r_io, ATA_FEATURE, feature);
|
|
ATA_OUTB(scp->r_io, ATA_COUNT, count);
|
|
ATA_OUTB(scp->r_io, ATA_SECTOR, sector);
|
|
ATA_OUTB(scp->r_io, ATA_CYL_MSB, cylinder >> 8);
|
|
ATA_OUTB(scp->r_io, ATA_CYL_LSB, cylinder);
|
|
ATA_OUTB(scp->r_io, ATA_DRIVE, ATA_D_IBM | device | head);
|
|
|
|
switch (flags) {
|
|
case ATA_WAIT_INTR:
|
|
scp->active |= ATA_WAIT_INTR;
|
|
ATA_OUTB(scp->r_io, ATA_CMD, command);
|
|
|
|
/* enable interrupt */
|
|
if (scp->flags & ATA_QUEUED)
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_4BIT);
|
|
|
|
if (tsleep((caddr_t)scp, PRIBIO, "atacmd", 10 * hz) != 0) {
|
|
ata_printf(scp, device, "ata_command: timeout waiting for intr\n");
|
|
scp->active &= ~ATA_WAIT_INTR;
|
|
error = -1;
|
|
}
|
|
break;
|
|
|
|
case ATA_WAIT_READY:
|
|
scp->active |= ATA_WAIT_READY;
|
|
ATA_OUTB(scp->r_io, ATA_CMD, command);
|
|
if (ata_wait(scp, device, ATA_S_READY) < 0) {
|
|
ata_printf(scp, device,
|
|
"timeout waiting for command=%02x s=%02x e=%02x\n",
|
|
command, scp->status, scp->error);
|
|
error = -1;
|
|
}
|
|
scp->active &= ~ATA_WAIT_READY;
|
|
break;
|
|
|
|
case ATA_IMMEDIATE:
|
|
ATA_OUTB(scp->r_io, ATA_CMD, command);
|
|
break;
|
|
|
|
default:
|
|
ata_printf(scp, device, "DANGER: illegal interrupt flag=%s\n",
|
|
active2str(flags));
|
|
}
|
|
/* enable interrupt */
|
|
if (scp->flags & ATA_QUEUED)
|
|
ATA_OUTB(scp->r_altio, ATA_ALTSTAT, ATA_A_4BIT);
|
|
return error;
|
|
}
|
|
|
|
void
|
|
ata_set_name(struct ata_softc *scp, int device, char *name, int lun)
|
|
{
|
|
scp->dev_name[ATA_DEV(device)] = malloc(strlen(name) + 4, M_ATA, M_NOWAIT);
|
|
if (scp->dev_name[ATA_DEV(device)])
|
|
sprintf(scp->dev_name[ATA_DEV(device)], "%s%d", name, lun);
|
|
}
|
|
|
|
void
|
|
ata_free_name(struct ata_softc *scp, int device)
|
|
{
|
|
if (scp->dev_name[ATA_DEV(device)])
|
|
free(scp->dev_name[ATA_DEV(device)], M_ATA);
|
|
scp->dev_name[ATA_DEV(device)] = NULL;
|
|
}
|
|
|
|
int
|
|
ata_get_lun(u_int32_t *map)
|
|
{
|
|
int lun = ffs(~*map) - 1;
|
|
|
|
*map |= (1 << lun);
|
|
return lun;
|
|
}
|
|
|
|
int
|
|
ata_test_lun(u_int32_t *map, int lun)
|
|
{
|
|
return (*map & (1 << lun));
|
|
}
|
|
|
|
void
|
|
ata_free_lun(u_int32_t *map, int lun)
|
|
{
|
|
*map &= ~(1 << lun);
|
|
}
|
|
|
|
int
|
|
ata_printf(struct ata_softc *scp, int device, const char * fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int ret;
|
|
|
|
if (device == -1)
|
|
ret = printf("ata%d: ", device_get_unit(scp->dev));
|
|
else {
|
|
if (scp->dev_name[ATA_DEV(device)])
|
|
ret = printf("%s: ", scp->dev_name[ATA_DEV(device)]);
|
|
else
|
|
ret = printf("ata%d-%s: ", device_get_unit(scp->dev),
|
|
(device == ATA_MASTER) ? "master" : "slave");
|
|
}
|
|
va_start(ap, fmt);
|
|
ret += vprintf(fmt, ap);
|
|
va_end(ap);
|
|
return ret;
|
|
}
|
|
|
|
char *
|
|
ata_mode2str(int mode)
|
|
{
|
|
switch (mode) {
|
|
case ATA_PIO: return "BIOSPIO";
|
|
case ATA_PIO0: return "PIO0";
|
|
case ATA_PIO1: return "PIO1";
|
|
case ATA_PIO2: return "PIO2";
|
|
case ATA_PIO3: return "PIO3";
|
|
case ATA_PIO4: return "PIO4";
|
|
case ATA_WDMA2: return "WDMA2";
|
|
case ATA_UDMA2: return "UDMA33";
|
|
case ATA_UDMA4: return "UDMA66";
|
|
case ATA_UDMA5: return "UDMA100";
|
|
case ATA_DMA: return "BIOSDMA";
|
|
default: return "???";
|
|
}
|
|
}
|
|
|
|
int
|
|
ata_pio2mode(int pio)
|
|
{
|
|
switch (pio) {
|
|
default:
|
|
case 0: return ATA_PIO0;
|
|
case 1: return ATA_PIO1;
|
|
case 2: return ATA_PIO2;
|
|
case 3: return ATA_PIO3;
|
|
case 4: return ATA_PIO4;
|
|
}
|
|
}
|
|
|
|
int
|
|
ata_pmode(struct ata_params *ap)
|
|
{
|
|
if (ap->atavalid & ATA_FLAG_64_70) {
|
|
if (ap->apiomodes & 2)
|
|
return 4;
|
|
if (ap->apiomodes & 1)
|
|
return 3;
|
|
}
|
|
if (ap->opiomode == 2)
|
|
return 2;
|
|
if (ap->opiomode == 1)
|
|
return 1;
|
|
if (ap->opiomode == 0)
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
ata_wmode(struct ata_params *ap)
|
|
{
|
|
if (ap->wdmamodes & 4)
|
|
return 2;
|
|
if (ap->wdmamodes & 2)
|
|
return 1;
|
|
if (ap->wdmamodes & 1)
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
ata_umode(struct ata_params *ap)
|
|
{
|
|
if (ap->atavalid & ATA_FLAG_88) {
|
|
if (ap->udmamodes & 0x20)
|
|
return 5;
|
|
if (ap->udmamodes & 0x10)
|
|
return 4;
|
|
if (ap->udmamodes & 0x08)
|
|
return 3;
|
|
if (ap->udmamodes & 0x04)
|
|
return 2;
|
|
if (ap->udmamodes & 0x02)
|
|
return 1;
|
|
if (ap->udmamodes & 0x01)
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static char *
|
|
active2str(int active)
|
|
{
|
|
static char buf[64];
|
|
|
|
bzero(buf, sizeof(buf));
|
|
if (active & ATA_IDLE)
|
|
strcat(buf, "ATA_IDLE ");
|
|
if (active & ATA_IMMEDIATE)
|
|
strcat(buf, "ATA_IMMEDIATE ");
|
|
if (active & ATA_WAIT_INTR)
|
|
strcat(buf, "ATA_WAIT_INTR ");
|
|
if (active & ATA_WAIT_READY)
|
|
strcat(buf, "ATA_WAIT_READY ");
|
|
if (active & ATA_ACTIVE)
|
|
strcat(buf, "ATA_ACTIVE ");
|
|
if (active & ATA_ACTIVE_ATA)
|
|
strcat(buf, "ATA_ACTIVE_ATA ");
|
|
if (active & ATA_ACTIVE_ATAPI)
|
|
strcat(buf, "ATA_ACTIVE_ATAPI ");
|
|
if (active & ATA_CONTROL)
|
|
strcat(buf, "ATA_CONTROL ");
|
|
return buf;
|
|
}
|
|
|
|
static void
|
|
bswap(int8_t *buf, int len)
|
|
{
|
|
u_int16_t *ptr = (u_int16_t*)(buf + len);
|
|
|
|
while (--ptr >= (u_int16_t*)buf)
|
|
*ptr = ntohs(*ptr);
|
|
}
|
|
|
|
static void
|
|
btrim(int8_t *buf, int len)
|
|
{
|
|
int8_t *ptr;
|
|
|
|
for (ptr = buf; ptr < buf+len; ++ptr)
|
|
if (!*ptr)
|
|
*ptr = ' ';
|
|
for (ptr = buf + len - 1; ptr >= buf && *ptr == ' '; --ptr)
|
|
*ptr = 0;
|
|
}
|
|
|
|
static void
|
|
bpack(int8_t *src, int8_t *dst, int len)
|
|
{
|
|
int i, j, blank;
|
|
|
|
for (i = j = blank = 0 ; i < len; i++) {
|
|
if (blank && src[i] == ' ') continue;
|
|
if (blank && src[i] != ' ') {
|
|
dst[j++] = src[i];
|
|
blank = 0;
|
|
continue;
|
|
}
|
|
if (src[i] == ' ') {
|
|
blank = 1;
|
|
if (i == 0)
|
|
continue;
|
|
}
|
|
dst[j++] = src[i];
|
|
}
|
|
if (j < len)
|
|
dst[j] = 0x00;
|
|
}
|
|
|
|
static void
|
|
ata_change_mode(struct ata_softc *scp, int device, int mode)
|
|
{
|
|
int umode, wmode, pmode;
|
|
int s = splbio();
|
|
|
|
while (!atomic_cmpset_int(&scp->active, ATA_IDLE, ATA_ACTIVE))
|
|
tsleep((caddr_t)&s, PRIBIO, "atachm", hz/4);
|
|
|
|
umode = ata_umode(ATA_PARAM(scp, device));
|
|
wmode = ata_wmode(ATA_PARAM(scp, device));
|
|
pmode = ata_pmode(ATA_PARAM(scp, device));
|
|
|
|
switch (mode & ATA_DMA_MASK) {
|
|
case ATA_UDMA:
|
|
if ((mode & ATA_MODE_MASK) < umode)
|
|
umode = mode & ATA_MODE_MASK;
|
|
break;
|
|
case ATA_WDMA:
|
|
if ((mode & ATA_MODE_MASK) < wmode)
|
|
wmode = mode & ATA_MODE_MASK;
|
|
umode = -1;
|
|
break;
|
|
default:
|
|
if (((mode & ATA_MODE_MASK) - ATA_PIO0) < pmode)
|
|
pmode = (mode & ATA_MODE_MASK) - ATA_PIO0;
|
|
umode = -1;
|
|
wmode = -1;
|
|
}
|
|
ata_dmainit(scp, device, pmode, wmode, umode);
|
|
|
|
scp->active = ATA_IDLE;
|
|
ata_start(scp);
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
ata_init(void)
|
|
{
|
|
/* register controlling device */
|
|
make_dev(&ata_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "ata");
|
|
|
|
/* register boot attach to be run when interrupts are enabled */
|
|
if (!(ata_delayed_attach = (struct intr_config_hook *)
|
|
malloc(sizeof(struct intr_config_hook),
|
|
M_TEMP, M_NOWAIT | M_ZERO))) {
|
|
printf("ata: malloc of delayed attach hook failed\n");
|
|
return;
|
|
}
|
|
|
|
ata_delayed_attach->ich_func = (void*)ata_boot_attach;
|
|
if (config_intrhook_establish(ata_delayed_attach) != 0) {
|
|
printf("ata: config_intrhook_establish failed\n");
|
|
free(ata_delayed_attach, M_TEMP);
|
|
}
|
|
}
|
|
SYSINIT(atadev, SI_SUB_DRIVERS, SI_ORDER_SECOND, ata_init, NULL)
|