freebsd-nq/include/sys/zil_impl.h
Etienne Dechamps 920dd524fb Add FASTWRITE algorithm for synchronous writes.
Currently, ZIL blocks are spread over vdevs using hint block pointers
managed by the ZIL commit code and passed to metaslab_alloc(). Spreading
log blocks accross vdevs is important for performance: indeed, using
mutliple disks in parallel decreases the ZIL commit latency, which is
the main performance metric for synchronous writes. However, the current
implementation suffers from the following issues:

1) It would be best if the ZIL module was not aware of such low-level
details. They should be handled by the ZIO and metaslab modules;

2) Because the hint block pointer is managed per log, simultaneous
commits from multiple logs might use the same vdevs at the same time,
which is inefficient;

3) Because dmu_write() does not honor the block pointer hint, indirect
writes are not spread.

The naive solution of rotating the metaslab rotor each time a block is
allocated for the ZIL or dmu_sync() doesn't work in practice because the
first ZIL block to be written is actually allocated during the previous
commit. Consequently, when metaslab_alloc() decides the vdev for this
block, it will do so while a bunch of other allocations are happening at
the same time (from dmu_sync() and other ZILs). This means the vdev for
this block is chosen more or less at random. When the next commit
happens, there is a high chance (especially when the number of blocks
per commit is slightly less than the number of the disks) that one disk
will have to write two blocks (with a potential seek) while other disks
are sitting idle, which defeats spreading and increases the commit
latency.

This commit introduces a new concept in the metaslab allocator:
fastwrites. Basically, each top-level vdev maintains a counter
indicating the number of synchronous writes (from dmu_sync() and the
ZIL) which have been allocated but not yet completed. When the metaslab
is called with the FASTWRITE flag, it will choose the vdev with the
least amount of pending synchronous writes. If there are multiple vdevs
with the same value, the first matching vdev (starting from the rotor)
is used. Once metaslab_alloc() has decided which vdev the block is
allocated to, it updates the fastwrite counter for this vdev.

The rationale goes like this: when an allocation is done with
FASTWRITE, it "reserves" the vdev until the data is written. Until then,
all future allocations will naturally avoid this vdev, even after a full
rotation of the rotor. As a result, pending synchronous writes at a
given point in time will be nicely spread over all vdevs. This contrasts
with the previous algorithm, which is based on the implicit assumption
that blocks are written instantaneously after they're allocated.

metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to
manually increase or decrease fastwrite counters, respectively. They
should be used with caution, as there is no per-BP tracking of fastwrite
information, so leaks and "double-unmarks" are possible. There is,
however, an assert in the vdev teardown code which will fire if the
fastwrite counters are not zero when the pool is exported or the vdev
removed. Note that as stated above, marking is also done implictly by
metaslab_alloc().

ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to
the metaslab when allocating (assuming ZIO does the allocation, which is
only true in the case of dmu_sync). This flag will also trigger an
unmark when zio_done() fires.

A side-effect of the new algorithm is that when a ZIL stops being used,
its last block can stay in the pending state (allocated but not yet
written) for a long time, polluting the fastwrite counters. To avoid
that, I've implemented a somewhat crude but working solution which
unmarks these pending blocks in zil_sync(), thus guaranteeing that
linguering fastwrites will get pruned at each sync event.

The best performance improvements are observed with pools using a large
number of top-level vdevs and heavy synchronous write workflows
(especially indirect writes and concurrent writes from multiple ZILs).
Real-life testing shows a 200% to 300% performance increase with
indirect writes and various commit sizes.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1013
2012-10-17 08:56:41 -07:00

149 lines
5.4 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
*/
/* Portions Copyright 2010 Robert Milkowski */
#ifndef _SYS_ZIL_IMPL_H
#define _SYS_ZIL_IMPL_H
#include <sys/zil.h>
#include <sys/dmu_objset.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Log write buffer.
*/
typedef struct lwb {
zilog_t *lwb_zilog; /* back pointer to log struct */
blkptr_t lwb_blk; /* on disk address of this log blk */
boolean_t lwb_fastwrite; /* is blk marked for fastwrite? */
int lwb_nused; /* # used bytes in buffer */
int lwb_sz; /* size of block and buffer */
char *lwb_buf; /* log write buffer */
zio_t *lwb_zio; /* zio for this buffer */
dmu_tx_t *lwb_tx; /* tx for log block allocation */
uint64_t lwb_max_txg; /* highest txg in this lwb */
list_node_t lwb_node; /* zilog->zl_lwb_list linkage */
} lwb_t;
/*
* Intent log transaction lists
*/
typedef struct itxs {
list_t i_sync_list; /* list of synchronous itxs */
avl_tree_t i_async_tree; /* tree of foids for async itxs */
} itxs_t;
typedef struct itxg {
kmutex_t itxg_lock; /* lock for this structure */
uint64_t itxg_txg; /* txg for this chain */
uint64_t itxg_sod; /* total size on disk for this txg */
itxs_t *itxg_itxs; /* sync and async itxs */
} itxg_t;
/* for async nodes we build up an AVL tree of lists of async itxs per file */
typedef struct itx_async_node {
uint64_t ia_foid; /* file object id */
list_t ia_list; /* list of async itxs for this foid */
avl_node_t ia_node; /* AVL tree linkage */
} itx_async_node_t;
/*
* Vdev flushing: during a zil_commit(), we build up an AVL tree of the vdevs
* we've touched so we know which ones need a write cache flush at the end.
*/
typedef struct zil_vdev_node {
uint64_t zv_vdev; /* vdev to be flushed */
avl_node_t zv_node; /* AVL tree linkage */
} zil_vdev_node_t;
#define ZIL_PREV_BLKS 16
/*
* Stable storage intent log management structure. One per dataset.
*/
struct zilog {
kmutex_t zl_lock; /* protects most zilog_t fields */
struct dsl_pool *zl_dmu_pool; /* DSL pool */
spa_t *zl_spa; /* handle for read/write log */
const zil_header_t *zl_header; /* log header buffer */
objset_t *zl_os; /* object set we're logging */
zil_get_data_t *zl_get_data; /* callback to get object content */
zio_t *zl_root_zio; /* log writer root zio */
uint64_t zl_lr_seq; /* on-disk log record sequence number */
uint64_t zl_commit_lr_seq; /* last committed on-disk lr seq */
uint64_t zl_destroy_txg; /* txg of last zil_destroy() */
uint64_t zl_replayed_seq[TXG_SIZE]; /* last replayed rec seq */
uint64_t zl_replaying_seq; /* current replay seq number */
uint32_t zl_suspend; /* log suspend count */
kcondvar_t zl_cv_writer; /* log writer thread completion */
kcondvar_t zl_cv_suspend; /* log suspend completion */
uint8_t zl_suspending; /* log is currently suspending */
uint8_t zl_keep_first; /* keep first log block in destroy */
uint8_t zl_replay; /* replaying records while set */
uint8_t zl_stop_sync; /* for debugging */
uint8_t zl_writer; /* boolean: write setup in progress */
uint8_t zl_logbias; /* latency or throughput */
uint8_t zl_sync; /* synchronous or asynchronous */
int zl_parse_error; /* last zil_parse() error */
uint64_t zl_parse_blk_seq; /* highest blk seq on last parse */
uint64_t zl_parse_lr_seq; /* highest lr seq on last parse */
uint64_t zl_parse_blk_count; /* number of blocks parsed */
uint64_t zl_parse_lr_count; /* number of log records parsed */
uint64_t zl_next_batch; /* next batch number */
uint64_t zl_com_batch; /* committed batch number */
kcondvar_t zl_cv_batch[2]; /* batch condition variables */
itxg_t zl_itxg[TXG_SIZE]; /* intent log txg chains */
list_t zl_itx_commit_list; /* itx list to be committed */
uint64_t zl_itx_list_sz; /* total size of records on list */
uint64_t zl_cur_used; /* current commit log size used */
list_t zl_lwb_list; /* in-flight log write list */
kmutex_t zl_vdev_lock; /* protects zl_vdev_tree */
avl_tree_t zl_vdev_tree; /* vdevs to flush in zil_commit() */
taskq_t *zl_clean_taskq; /* runs lwb and itx clean tasks */
avl_tree_t zl_bp_tree; /* track bps during log parse */
clock_t zl_replay_time; /* lbolt of when replay started */
uint64_t zl_replay_blks; /* number of log blocks replayed */
zil_header_t zl_old_header; /* debugging aid */
uint_t zl_prev_blks[ZIL_PREV_BLKS]; /* size - sector rounded */
uint_t zl_prev_rotor; /* rotor for zl_prev[] */
};
typedef struct zil_bp_node {
dva_t zn_dva;
avl_node_t zn_node;
} zil_bp_node_t;
#define ZIL_MAX_LOG_DATA (SPA_MAXBLOCKSIZE - sizeof (zil_chain_t) - \
sizeof (lr_write_t))
#ifdef __cplusplus
}
#endif
#endif /* _SYS_ZIL_IMPL_H */