Bill Paul e979bff557 Workaround to prevent VMware from melting down. The pseudo PCnet interface ...

in VMware reports 0x00000000 in the PCI subsystem ID register, but
0x10001000 when you read the mirror registers in I/O space. This causes
pcn_probe() to think it's found a card in 32-bit mode, and performing
a 32-bit I/O access makes on a 16-bit port makes VMware go boom. Special
case the 0x10001000 value until somebody at VMware grows a clue.

Finally discovered by: Andrew Gallatin

2001-02-26 22:23:55 +00:00

..

agp_ali.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_amd.c

Remove unneeded #include <machine/clock.h>

2000-10-15 14:19:01 +00:00

agp_i810.c

Added support for i815.

2000-10-16 08:53:00 +00:00

agp_if.m

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_intel.c

Add i815 host to PCI bridge ID

2000-10-20 16:05:47 +00:00

agp_sis.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_via.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp.c

un-staticize M_AGP so that it can be used in agp*.c

2000-12-19 08:32:37 +00:00

agppriv.h

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agpreg.h

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agpvar.h

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

alpm.c

Remove unneeded (and compile-breaking) #include "alpm.h"

2001-01-17 00:38:06 +00:00

amd.c

Remove unneeded #include <machine/clock.h>

2000-10-15 14:19:01 +00:00

amd.h

Back out the previous change to the queue(3) interface.

2000-05-26 02:09:24 +00:00

cy_pci.c

Converted to new-bus.

2001-02-01 09:49:57 +00:00

cy_pcireg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

dc21040reg.h

s/Id/FreeBSD/

1999-08-09 12:52:49 +00:00

ide_pcireg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

if_dc.c

Apply patch to allow TX underrun handling without issuing a complete

2001-02-22 19:26:55 +00:00

if_dcreg.h

Apply patch to allow TX underrun handling without issuing a complete

2001-02-22 19:26:55 +00:00

if_de.c

Convert if_multiaddrs from LIST to TAILQ so that it can be traversed

2001-02-06 10:12:15 +00:00

if_devar.h

Use bus_space for all register accesses.

2000-05-13 18:47:24 +00:00

if_en_pci.c

newbusify the en atm driver.

2000-11-07 09:31:28 +00:00

if_fxp.c

Convert if_multiaddrs from LIST to TAILQ so that it can be traversed

2001-02-06 10:12:15 +00:00

if_fxpreg.h

Add the PCI device ID for the on-board ethernet controllers on the

2000-09-21 20:01:57 +00:00

if_fxpvar.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_mn.c

Update these netgraph drivers in current so that these changes can be

2001-01-21 22:16:20 +00:00

if_pcn.c

Workaround to prevent VMware from melting down. The pseudo PCnet interface

2001-02-26 22:23:55 +00:00

if_pcnreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_rl.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_rlreg.h

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_sf.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_sfreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_sis.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_sisreg.h

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_sk.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_skreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_ste.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_stereg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_ti.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_tireg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_tl.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_tlreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_tx.c

Add support for SMC9432FTX card, possibly othe fiber optic SMC9432 family

2001-02-07 20:11:02 +00:00

if_txvar.h

Add support for SMC9432FTX card, possibly othe fiber optic SMC9432 family

2001-02-07 20:11:02 +00:00

if_vr.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_vrreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_wb.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_wbreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_wx.c

Convert if_multiaddrs from LIST to TAILQ so that it can be traversed

2001-02-06 10:12:15 +00:00

if_wxreg.h

Move $FreeBSD id up to top of file for multi-OS ease of support reasons.

2000-12-06 00:50:53 +00:00

if_wxvar.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

if_xl.c

Big round of minor updates:

2001-02-21 20:54:22 +00:00

if_xlreg.h

Change and clean the mutex lock interface.

2001-02-09 06:11:45 +00:00

intpm.c

Remove unneeded #include <machine/clock.h>

2000-10-15 14:19:01 +00:00

intpmreg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

locate.pl

use warnings

2000-06-27 22:41:12 +00:00

meteor_reg.h

Add $FreeBSD$

2000-05-01 20:32:07 +00:00

meteor.c

Special case for compiling LINT - just give a warning and continue on.

2001-01-17 00:47:46 +00:00

ncr.c

Convert more malloc+bzero to malloc+M_ZERO.

2000-12-08 21:51:06 +00:00

ncrreg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ohci_pci.c

Remove a couple of leftover unused variables.

2000-12-13 01:06:54 +00:00

pcic_p.c

Move ti1031 to the 16-bit bridge section

2001-02-07 01:16:40 +00:00

pcic_p.h

Add device id for the OZ Micro 6832. I didn't try to init it like the

2001-01-02 21:42:48 +00:00

scsiiom.c

Add $FreeBSD$

2000-05-01 20:32:07 +00:00

simos.c

Convert more malloc+bzero to malloc+M_ZERO.

2000-12-08 21:51:06 +00:00

simos.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ti_fw2.h

Use a custom Tigon 2 firmware image, hopefully temporarily. This is

2000-07-26 23:55:34 +00:00

ti_fw.h

Update the Tigon driver to support 1000baseTX gigE over copper AceNIC

2000-07-20 22:24:43 +00:00

uhci_pci.c

Remove a couple of leftover unused variables.

2000-12-13 01:06:54 +00:00

xmaciireg.h

Reoganize/update the SysKonnect driver:

2000-04-22 02:16:41 +00:00

xrpu.c

Do not depend on FreeBSD 2.2 compatability defines.

2000-05-28 16:18:58 +00:00