Adrian Chadd 8454b1bf68 Ensure that BAR(0) is set for the PCI slot before the ath(4) PCI registers ... are written out. This allows EEPROM-less NICs on the AR7241 PCIe bus to be correctly initialised. Tested: * AP91 (AR7240+AR9285) - the existing board support didn't break; * AP99 (AR7241+AR9287) - this fixed the configuration of the AR9287 PCI.		2012-08-26 04:39:20 +00:00
..
apb.c	Move PMC hook invocation to cpu_intr. The idea is the same as with ast()	2012-03-22 17:47:52 +00:00
apbvar.h	- Add intr counters for APB interrupts	2009-11-18 22:53:05 +00:00
ar71xx_bus_space_reversed.c	- Handle byte-order issue for non-word accesses to memory mapped	2009-04-19 22:56:35 +00:00
ar71xx_bus_space_reversed.h	- Handle byte-order issue for non-word accesses to memory mapped	2009-04-19 22:56:35 +00:00
ar71xx_chip.c	Fix a totally bone-headed, last minute bounds check snafu that somehow	2012-05-03 05:52:39 +00:00
ar71xx_chip.h	MII related infrastructure changes.	2012-05-02 01:21:57 +00:00
ar71xx_cpudef.h	Further ar71xx MII support improvements.	2012-05-02 04:51:43 +00:00
ar71xx_ehci.c	Implement better support for USB controller suspend and resume.	2011-12-14 00:28:54 +00:00
ar71xx_fixup.c	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_fixup.h	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_gpio.c	The GPIO drivers were initialising their mutexes with type of	2012-08-17 04:44:57 +00:00
ar71xx_gpiovar.h	Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.	2011-05-06 02:45:02 +00:00
ar71xx_machdep.c	Remove platform APIs which are not used by any code and which had only stub	2012-03-12 07:34:15 +00:00
ar71xx_ohci.c	Implement better support for USB controller suspend and resume.	2011-12-14 00:28:54 +00:00
ar71xx_pci_bus_space.c	- Add pci bus space that translates byte order to little endian,	2009-05-15 21:36:50 +00:00
ar71xx_pci_bus_space.h	- Add pci bus space that translates byte order to little endian,	2009-05-15 21:36:50 +00:00
ar71xx_pci.c	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
ar71xx_setup.c	Remove duplicate header includes	2011-06-26 10:07:48 +00:00
ar71xx_setup.h	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00
ar71xx_spi.c	- Remove unnecessary register writes in activate_device	2010-01-21 00:15:59 +00:00
ar71xx_wdog.c	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00
ar71xxreg.h	Add a missing newline.	2012-05-02 06:17:16 +00:00
ar91xx_chip.c	Further ar71xx MII support improvements.	2012-05-02 04:51:43 +00:00
ar91xx_chip.h	Add initial Atheros AR91XX support.	2010-08-19 11:40:10 +00:00
ar91xxreg.h	Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.	2011-05-06 02:45:02 +00:00
ar724x_chip.c	Further ar71xx MII support improvements.	2012-05-02 04:51:43 +00:00
ar724x_chip.h	Add some initial AR724X chipset support.	2010-08-19 11:53:55 +00:00
ar724x_pci.c	Ensure that BAR(0) is set for the PCI slot before the ath(4) PCI registers	2012-08-26 04:39:20 +00:00
ar724xreg.h	Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.	2011-05-06 02:45:02 +00:00
files.ar71xx	Introduce the matching PCI ath(4) fixup code from ar71xx_pci into	2012-04-20 08:26:05 +00:00
if_arge.c	Disable setting the MII port speed.	2012-05-04 02:26:15 +00:00
if_argevar.h	Implement PLL configuration override support, similar to what openwrt	2012-05-02 07:43:11 +00:00
pcf2123_rtc.c	- Add driver for PCF2123, SPI real time clock/calendar	2010-01-22 22:14:12 +00:00
pcf2123reg.h	- Add driver for PCF2123, SPI real time clock/calendar	2010-01-22 22:14:12 +00:00
std.ar71xx	Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.	2012-03-29 02:54:35 +00:00
uart_bus_ar71xx.c	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00
uart_cpu_ar71xx.c	Preparation work for supporting the AR91xx and AR724x.	2010-08-19 02:03:12 +00:00