d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ea8d14925c
freebsd-nq/sys/net80211/ieee80211_adhoc.c
Adrian Chadd c79f192c09 Begin plumbing ieee80211_rx_stats through the receive path. 
Smart NICs with firmware (eg wpi, iwn, the new atheros parts, the intel 7260
series, etc) support doing a lot of things in firmware.  This includes but
isn't limited to things like scanning, sending probe requests and receiving
probe responses.  However, net80211 doesn't know about any of this - it still
drives the whole scan/probe infrastructure itself.

In order to move towards suppoting smart NICs, the receive path needs to
know about the channel/details for each received packet.  In at least
the iwn and 7260 firmware (and I believe wpi, but I haven't tried it yet)
it will do the scanning, power-save and off-channel buffering for you -
all you need to do is handle receiving beacons and probe responses on
channels that aren't what you're currently on.  However the whole receive
path is peppered with ic->ic_curchan and manual scan/powersave handling.
The beacon parsing code also checks ic->ic_curchan to determine if the
received beacon is on the correct channel or not.[1]

So:

* add freq/ieee values to ieee80211_rx_stats;
* change ieee80211_parse_beacon() to accept the 'current' channel
  as an argument;
* modify the iv_input() and iv_recv_mgmt() methods to include the rx_stats;
* add a new method - ieee80211_lookup_channel_rxstats() - that looks up
  a channel based on the contents of ieee80211_rx_stats;
* if it exists, use it in the mgmt path to switch the current channel
  (which still defaults to ic->ic_curchan) over to something determined
  by rx_stats.

This is enough to kick-start scan offload support in the Intel 7260
driver that Rui/I are working on.  It also is a good start for scan
offload support for a handful of existing NICs (wpi, iwn, some USB
parts) and it'll very likely dramatically improve stability/performance
there.  It's not the whole thing - notably, we don't need to do powersave,
we should not scan all channels, and we should leave probe request sending
to the firmware and not do it ourselves.  But, this allows for continued
development on the above features whilst actually having a somewhat
working NIC.

TODO:

* Finish tidying up how the net80211 input path works.
  Right now ieee80211_input / ieee80211_input_all act as the top-level
  that everything feeds into; it should change so the MIMO input routines
  are those and the legacy routines are phased out.

* The band selection should be done by the driver, not by the net80211
  layer.

* ieee80211_lookup_channel_rxstats() only determines 11b or 11g channels
  for now - this is enough for scanning, but not 100% true in all cases.
  If we ever need to handle off-channel scan support for things like
  static-40MHz or static-80MHz, or turbo-G, or half/quarter rates,
  then we should extend this.

[1] This is a side effect of frequency-hopping and CCK modes - you
    can receive beacons when you think you're on a different channel.
    In particular, CCK (which is used by the low 11b rates, eg beacons!)
    is decodable from adjacent channels - just at a low SNR.
    FH is a side effect of having the hardware/firmware do the frequency
    hopping - it may pick up beacons transmitted from other FH networks
    that are in a different phase of hopping frequencies.
2015-05-25 16:37:41 +00:00

974 lines
28 KiB
C
Raw Blame History

/*-
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifdef __FreeBSD__
__FBSDID("$FreeBSD$");
#endif
/*
* IEEE 802.11 IBSS mode support.
*/
#include "opt_inet.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/endian.h>
#include <sys/errno.h>
#include <sys/proc.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_media.h>
#include <net/if_llc.h>
#include <net/ethernet.h>
#include <net/bpf.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_adhoc.h>
#include <net80211/ieee80211_input.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#ifdef IEEE80211_SUPPORT_TDMA
#include <net80211/ieee80211_tdma.h>
#endif
#include <net80211/ieee80211_sta.h>
#define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2)
static void adhoc_vattach(struct ieee80211vap *);
static int adhoc_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static int adhoc_input(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_rx_stats *, int, int);
static void adhoc_recv_mgmt(struct ieee80211_node *, struct mbuf *,
int subtype, const struct ieee80211_rx_stats *, int, int);
static void ahdemo_recv_mgmt(struct ieee80211_node *, struct mbuf *,
int subtype, const struct ieee80211_rx_stats *rxs, int, int);
static void adhoc_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype);
void
ieee80211_adhoc_attach(struct ieee80211com *ic)
{
ic->ic_vattach[IEEE80211_M_IBSS] = adhoc_vattach;
ic->ic_vattach[IEEE80211_M_AHDEMO] = adhoc_vattach;
}
void
ieee80211_adhoc_detach(struct ieee80211com *ic)
{
}
static void
adhoc_vdetach(struct ieee80211vap *vap)
{
}
static void
adhoc_vattach(struct ieee80211vap *vap)
{
vap->iv_newstate = adhoc_newstate;
vap->iv_input = adhoc_input;
if (vap->iv_opmode == IEEE80211_M_IBSS)
vap->iv_recv_mgmt = adhoc_recv_mgmt;
else
vap->iv_recv_mgmt = ahdemo_recv_mgmt;
vap->iv_recv_ctl = adhoc_recv_ctl;
vap->iv_opdetach = adhoc_vdetach;
#ifdef IEEE80211_SUPPORT_TDMA
/*
* Throw control to tdma support. Note we do this
* after setting up our callbacks so it can piggyback
* on top of us.
*/
if (vap->iv_caps & IEEE80211_C_TDMA)
ieee80211_tdma_vattach(vap);
#endif
}
static void
sta_leave(void *arg, struct ieee80211_node *ni)
{
struct ieee80211vap *vap = arg;
if (ni->ni_vap == vap && ni != vap->iv_bss)
ieee80211_node_leave(ni);
}
/*
* IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler.
*/
static int
adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(vap->iv_ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
if (ostate != IEEE80211_S_SCAN)
ieee80211_cancel_scan(vap); /* background scan */
ni = vap->iv_bss; /* NB: no reference held */
switch (nstate) {
case IEEE80211_S_INIT:
switch (ostate) {
case IEEE80211_S_SCAN:
ieee80211_cancel_scan(vap);
break;
default:
break;
}
if (ostate != IEEE80211_S_INIT) {
/* NB: optimize INIT -> INIT case */
ieee80211_reset_bss(vap);
}
break;
case IEEE80211_S_SCAN:
switch (ostate) {
case IEEE80211_S_RUN: /* beacon miss */
/* purge station table; entries are stale */
ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap);
/* fall thru... */
case IEEE80211_S_INIT:
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) {
/*
* Already have a channel; bypass the
* scan and startup immediately.
*/
ieee80211_create_ibss(vap,
ieee80211_ht_adjust_channel(ic,
vap->iv_des_chan, vap->iv_flags_ht));
break;
}
/*
* Initiate a scan. We can come here as a result
* of an IEEE80211_IOC_SCAN_REQ too in which case
* the vap will be marked with IEEE80211_FEXT_SCANREQ
* and the scan request parameters will be present
* in iv_scanreq. Otherwise we do the default.
*/
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
break;
case IEEE80211_S_SCAN:
/*
* This can happen because of a change in state
* that requires a reset. Trigger a new scan
* unless we're in manual roaming mode in which
* case an application must issue an explicit request.
*/
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
default:
goto invalid;
}
break;
case IEEE80211_S_RUN:
if (vap->iv_flags & IEEE80211_F_WPA) {
/* XXX validate prerequisites */
}
switch (ostate) {
case IEEE80211_S_SCAN:
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_debug(vap)) {
ieee80211_note(vap,
"synchronized with %s ssid ",
ether_sprintf(ni->ni_bssid));
ieee80211_print_essid(vap->iv_bss->ni_essid,
ni->ni_esslen);
/* XXX MCS/HT */
printf(" channel %d start %uMb\n",
ieee80211_chan2ieee(ic, ic->ic_curchan),
IEEE80211_RATE2MBS(ni->ni_txrate));
}
#endif
break;
case IEEE80211_S_RUN: /* IBSS merge */
break;
default:
goto invalid;
}
/*
* When 802.1x is not in use mark the port authorized
* at this point so traffic can flow.
*/
if (ni->ni_authmode != IEEE80211_AUTH_8021X)
ieee80211_node_authorize(ni);
/*
* Fake association when joining an existing bss.
*/
if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) &&
ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN);
break;
case IEEE80211_S_SLEEP:
vap->iv_sta_ps(vap, 0);
break;
default:
invalid:
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
"%s: unexpected state transition %s -> %s\n", __func__,
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
break;
}
return 0;
}
/*
* Decide if a received management frame should be
* printed when debugging is enabled. This filters some
* of the less interesting frames that come frequently
* (e.g. beacons).
*/
static __inline int
doprint(struct ieee80211vap *vap, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BEACON:
return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN);
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
return 1;
}
return 1;
}
/*
* Process a received frame. The node associated with the sender
* should be supplied. If nothing was found in the node table then
* the caller is assumed to supply a reference to iv_bss instead.
* The RSSI and a timestamp are also supplied. The RSSI data is used
* during AP scanning to select a AP to associate with; it can have
* any units so long as values have consistent units and higher values
* mean ``better signal''. The receive timestamp is currently not used
* by the 802.11 layer.
*/
static int
adhoc_input(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211_frame *wh;
struct ieee80211_key *key;
struct ether_header *eh;
int hdrspace, need_tap = 1; /* mbuf need to be tapped. */
uint8_t dir, type, subtype, qos;
uint8_t *bssid;
uint16_t rxseq;
if (m->m_flags & M_AMPDU_MPDU) {
/*
* Fastpath for A-MPDU reorder q resubmission. Frames
* w/ M_AMPDU_MPDU marked have already passed through
* here but were received out of order and been held on
* the reorder queue. When resubmitted they are marked
* with the M_AMPDU_MPDU flag and we can bypass most of
* the normal processing.
*/
wh = mtod(m, struct ieee80211_frame *);
type = IEEE80211_FC0_TYPE_DATA;
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
subtype = IEEE80211_FC0_SUBTYPE_QOS;
hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */
goto resubmit_ampdu;
}
KASSERT(ni != NULL, ("null node"));
ni->ni_inact = ni->ni_inact_reload;
type = -1; /* undefined */
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"too short (1): len %u", m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
/*
* Bit of a cheat here, we use a pointer for a 3-address
* frame format but don't reference fields past outside
* ieee80211_frame_min w/o first validating the data is
* present.
*/
wh = mtod(m, struct ieee80211_frame *);
if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) !=
IEEE80211_FC0_VERSION_0) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x",
wh->i_fc[0], wh->i_fc[1]);
vap->iv_stats.is_rx_badversion++;
goto err;
}
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
if (dir != IEEE80211_FC1_DIR_NODS)
bssid = wh->i_addr1;
else if (type == IEEE80211_FC0_TYPE_CTL)
bssid = wh->i_addr1;
else {
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
IEEE80211_DISCARD_MAC(vap,
IEEE80211_MSG_ANY, ni->ni_macaddr,
NULL, "too short (2): len %u",
m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
bssid = wh->i_addr3;
}
/*
* Validate the bssid.
*/
if (!(type == IEEE80211_FC0_TYPE_MGT &&
(subtype == IEEE80211_FC0_SUBTYPE_BEACON ||
subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)) &&
!IEEE80211_ADDR_EQ(bssid, vap->iv_bss->ni_bssid) &&
!IEEE80211_ADDR_EQ(bssid, ifp->if_broadcastaddr)) {
/* not interested in */
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
bssid, NULL, "%s", "not to bss");
vap->iv_stats.is_rx_wrongbss++;
goto out;
}
/*
* Data frame, cons up a node when it doesn't
* exist. This should probably done after an ACL check.
*/
if (type == IEEE80211_FC0_TYPE_DATA &&
ni == vap->iv_bss &&
!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
/*
* Beware of frames that come in too early; we
* can receive broadcast frames and creating sta
* entries will blow up because there is no bss
* channel yet.
*/
if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "not in RUN state (%s)",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_badstate++;
goto err;
}
/*
* Fake up a node for this newly
* discovered member of the IBSS.
*/
ni = ieee80211_fakeup_adhoc_node(vap, wh->i_addr2);
if (ni == NULL) {
/* NB: stat kept for alloc failure */
goto err;
}
}
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
ni->ni_noise = nf;
if (IEEE80211_HAS_SEQ(type, subtype) &&
IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
uint8_t tid = ieee80211_gettid(wh);
if (IEEE80211_QOS_HAS_SEQ(wh) &&
TID_TO_WME_AC(tid) >= WME_AC_VI)
ic->ic_wme.wme_hipri_traffic++;
rxseq = le16toh(*(uint16_t *)wh->i_seq);
if (! ieee80211_check_rxseq(ni, wh)) {
/* duplicate, discard */
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
bssid, "duplicate",
"seqno <%u,%u> fragno <%u,%u> tid %u",
rxseq >> IEEE80211_SEQ_SEQ_SHIFT,
ni->ni_rxseqs[tid] >>
IEEE80211_SEQ_SEQ_SHIFT,
rxseq & IEEE80211_SEQ_FRAG_MASK,
ni->ni_rxseqs[tid] &
IEEE80211_SEQ_FRAG_MASK,
tid);
vap->iv_stats.is_rx_dup++;
IEEE80211_NODE_STAT(ni, rx_dup);
goto out;
}
ni->ni_rxseqs[tid] = rxseq;
}
}
switch (type) {
case IEEE80211_FC0_TYPE_DATA:
hdrspace = ieee80211_hdrspace(ic, wh);
if (m->m_len < hdrspace &&
(m = m_pullup(m, hdrspace)) == NULL) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"data too short: expecting %u", hdrspace);
vap->iv_stats.is_rx_tooshort++;
goto out; /* XXX */
}
if (dir != IEEE80211_FC1_DIR_NODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto out;
}
/* XXX no power-save support */
/*
* Handle A-MPDU re-ordering. If the frame is to be
* processed directly then ieee80211_ampdu_reorder
* will return 0; otherwise it has consumed the mbuf
* and we should do nothing more with it.
*/
if ((m->m_flags & M_AMPDU) &&
ieee80211_ampdu_reorder(ni, m) != 0) {
m = NULL;
goto out;
}
resubmit_ampdu:
/*
* Handle privacy requirements. Note that we
* must not be preempted from here until after
* we (potentially) call ieee80211_crypto_demic;
* otherwise we may violate assumptions in the
* crypto cipher modules used to do delayed update
* of replay sequence numbers.
*/
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) {
/*
* Discard encrypted frames when privacy is off.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "WEP", "%s", "PRIVACY off");
vap->iv_stats.is_rx_noprivacy++;
IEEE80211_NODE_STAT(ni, rx_noprivacy);
goto out;
}
key = ieee80211_crypto_decap(ni, m, hdrspace);
if (key == NULL) {
/* NB: stats+msgs handled in crypto_decap */
IEEE80211_NODE_STAT(ni, rx_wepfail);
goto out;
}
wh = mtod(m, struct ieee80211_frame *);
wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
} else {
/* XXX M_WEP and IEEE80211_F_PRIVACY */
key = NULL;
}
/*
* Save QoS bits for use below--before we strip the header.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_QOS) {
qos = (dir == IEEE80211_FC1_DIR_DSTODS) ?
((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] :
((struct ieee80211_qosframe *)wh)->i_qos[0];
} else
qos = 0;
/*
* Next up, any fragmentation.
*/
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
m = ieee80211_defrag(ni, m, hdrspace);
if (m == NULL) {
/* Fragment dropped or frame not complete yet */
goto out;
}
}
wh = NULL; /* no longer valid, catch any uses */
/*
* Next strip any MSDU crypto bits.
*/
if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "demic error");
vap->iv_stats.is_rx_demicfail++;
IEEE80211_NODE_STAT(ni, rx_demicfail);
goto out;
}
/* copy to listener after decrypt */
if (ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
need_tap = 0;
/*
* Finally, strip the 802.11 header.
*/
m = ieee80211_decap(vap, m, hdrspace);
if (m == NULL) {
/* XXX mask bit to check for both */
/* don't count Null data frames as errors */
if (subtype == IEEE80211_FC0_SUBTYPE_NODATA ||
subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL)
goto out;
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "decap error");
vap->iv_stats.is_rx_decap++;
IEEE80211_NODE_STAT(ni, rx_decap);
goto err;
}
eh = mtod(m, struct ether_header *);
if (!ieee80211_node_is_authorized(ni)) {
/*
* Deny any non-PAE frames received prior to
* authorization. For open/shared-key
* authentication the port is mark authorized
* after authentication completes. For 802.1x
* the port is not marked authorized by the
* authenticator until the handshake has completed.
*/
if (eh->ether_type != htons(ETHERTYPE_PAE)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
eh->ether_shost, "data",
"unauthorized port: ether type 0x%x len %u",
eh->ether_type, m->m_pkthdr.len);
vap->iv_stats.is_rx_unauth++;
IEEE80211_NODE_STAT(ni, rx_unauth);
goto err;
}
} else {
/*
* When denying unencrypted frames, discard
* any non-PAE frames received without encryption.
*/
if ((vap->iv_flags & IEEE80211_F_DROPUNENC) &&
(key == NULL && (m->m_flags & M_WEP) == 0) &&
eh->ether_type != htons(ETHERTYPE_PAE)) {
/*
* Drop unencrypted frames.
*/
vap->iv_stats.is_rx_unencrypted++;
IEEE80211_NODE_STAT(ni, rx_unencrypted);
goto out;
}
}
/* XXX require HT? */
if (qos & IEEE80211_QOS_AMSDU) {
m = ieee80211_decap_amsdu(ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
} else {
#ifdef IEEE80211_SUPPORT_SUPERG
m = ieee80211_decap_fastframe(vap, ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
#endif
}
if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap != NULL)
ieee80211_deliver_data(ni->ni_wdsvap, ni, m);
else
ieee80211_deliver_data(vap, ni, m);
return IEEE80211_FC0_TYPE_DATA;
case IEEE80211_FC0_TYPE_MGT:
vap->iv_stats.is_rx_mgmt++;
IEEE80211_NODE_STAT(ni, rx_mgmt);
if (dir != IEEE80211_FC1_DIR_NODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto err;
}
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, "mgt", "too short: len %u",
m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
#ifdef IEEE80211_DEBUG
if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) ||
ieee80211_msg_dumppkts(vap)) {
if_printf(ifp, "received %s from %s rssi %d\n",
ieee80211_mgt_subtype_name[subtype >>
IEEE80211_FC0_SUBTYPE_SHIFT],
ether_sprintf(wh->i_addr2), rssi);
}
#endif
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "WEP set but not permitted");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX */
goto out;
}
vap->iv_recv_mgmt(ni, m, subtype, rxs, rssi, nf);
goto out;
case IEEE80211_FC0_TYPE_CTL:
vap->iv_stats.is_rx_ctl++;
IEEE80211_NODE_STAT(ni, rx_ctrl);
vap->iv_recv_ctl(ni, m, subtype);
goto out;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "bad", "frame type 0x%x", type);
/* should not come here */
break;
}
err:
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
out:
if (m != NULL) {
if (need_tap && ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
m_freem(m);
}
return type;
}
static int
is11bclient(const uint8_t *rates, const uint8_t *xrates)
{
static const uint32_t brates = (1<<2*1)|(1<<2*2)|(1<<11)|(1<<2*11);
int i;
/* NB: the 11b clients we care about will not have xrates */
if (xrates != NULL || rates == NULL)
return 0;
for (i = 0; i < rates[1]; i++) {
int r = rates[2+i] & IEEE80211_RATE_VAL;
if (r > 2*11 || ((1<<r) & brates) == 0)
return 0;
}
return 1;
}
static void
adhoc_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
int subtype, const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_channel *rxchan = ic->ic_curchan;
struct ieee80211_frame *wh;
uint8_t *frm, *efrm, *sfrm;
uint8_t *ssid, *rates, *xrates;
#if 0
int ht_state_change = 0;
#endif
wh = mtod(m0, struct ieee80211_frame *);
frm = (uint8_t *)&wh[1];
efrm = mtod(m0, uint8_t *) + m0->m_len;
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_BEACON: {
struct ieee80211_scanparams scan;
struct ieee80211_channel *c;
/*
* We process beacon/probe response
* frames to discover neighbors.
*/
if (rxs != NULL) {
c = ieee80211_lookup_channel_rxstatus(vap, rxs);
if (c != NULL)
rxchan = c;
}
if (ieee80211_parse_beacon(ni, m0, rxchan, &scan) != 0)
return;
/*
* Count frame now that we know it's to be processed.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
vap->iv_stats.is_rx_beacon++; /* XXX remove */
IEEE80211_NODE_STAT(ni, rx_beacons);
} else
IEEE80211_NODE_STAT(ni, rx_proberesp);
/*
* If scanning, just pass information to the scan module.
*/
if (ic->ic_flags & IEEE80211_F_SCAN) {
if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) {
/*
* Actively scanning a channel marked passive;
* send a probe request now that we know there
* is 802.11 traffic present.
*
* XXX check if the beacon we recv'd gives
* us what we need and suppress the probe req
*/
ieee80211_probe_curchan(vap, 1);
ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN;
}
ieee80211_add_scan(vap, rxchan, &scan, wh,
subtype, rssi, nf);
return;
}
if (scan.capinfo & IEEE80211_CAPINFO_IBSS) {
if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
/*
* Create a new entry in the neighbor table.
*/
ni = ieee80211_add_neighbor(vap, wh, &scan);
} else if (ni->ni_capinfo == 0) {
/*
* Update faked node created on transmit.
* Note this also updates the tsf.
*/
ieee80211_init_neighbor(ni, wh, &scan);
} else {
/*
* Record tsf for potential resync.
*/
memcpy(ni->ni_tstamp.data, scan.tstamp,
sizeof(ni->ni_tstamp));
}
/*
* This isn't enabled yet - otherwise it would
* update the HT parameters and channel width
* from any node, which could lead to lots of
* strange behaviour if the 11n nodes aren't
* exactly configured to match.
*/
#if 0
if (scan.htcap != NULL && scan.htinfo != NULL &&
(vap->iv_flags_ht & IEEE80211_FHT_HT)) {
if (ieee80211_ht_updateparams(ni,
scan.htcap, scan.htinfo))
ht_state_change = 1;
}
#endif
if (ni != NULL) {
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
ni->ni_noise = nf;
}
/*
* Same here - the channel width change should
* be applied to the specific peer node, not
* to the ic. Ie, the interface configuration
* should stay in its current channel width;
* but it should change the rate control and
* any queued frames for the given node only.
*
* Since there's no (current) way to inform
* the driver that a channel width change has
* occured for a single node, just stub this
* out.
*/
#if 0
if (ht_state_change)
ieee80211_update_chw(ic);
#endif
}
break;
}
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
if (IEEE80211_IS_MULTICAST(wh->i_addr2)) {
/* frame must be directed */
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not unicast");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */
return;
}
/*
* prreq frame format
* [tlv] ssid
* [tlv] supported rates
* [tlv] extended supported rates
*/
ssid = rates = xrates = NULL;
sfrm = frm;
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
switch (*frm) {
case IEEE80211_ELEMID_SSID:
ssid = frm;
break;
case IEEE80211_ELEMID_RATES:
rates = frm;
break;
case IEEE80211_ELEMID_XRATES:
xrates = frm;
break;
}
frm += frm[1] + 2;
}
IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return);
if (xrates != NULL)
IEEE80211_VERIFY_ELEMENT(xrates,
IEEE80211_RATE_MAXSIZE - rates[1], return);
IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return);
IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return);
if ((vap->iv_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL,
"%s", "no ssid with ssid suppression enabled");
vap->iv_stats.is_rx_ssidmismatch++; /*XXX*/
return;
}
/* XXX find a better class or define it's own */
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2,
"%s", "recv probe req");
/*
* Some legacy 11b clients cannot hack a complete
* probe response frame. When the request includes
* only a bare-bones rate set, communicate this to
* the transmit side.
*/
ieee80211_send_proberesp(vap, wh->i_addr2,
is11bclient(rates, xrates) ? IEEE80211_SEND_LEGACY_11B : 0);
break;
case IEEE80211_FC0_SUBTYPE_ACTION:
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
if (ni == vap->iv_bss) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "unknown node");
vap->iv_stats.is_rx_mgtdiscard++;
} else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) &&
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not for us");
vap->iv_stats.is_rx_mgtdiscard++;
} else if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
} else {
if (ieee80211_parse_action(ni, m0) == 0)
(void)ic->ic_recv_action(ni, wh, frm, efrm);
}
break;
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_ATIM:
case IEEE80211_FC0_SUBTYPE_DISASSOC:
case IEEE80211_FC0_SUBTYPE_AUTH:
case IEEE80211_FC0_SUBTYPE_DEAUTH:
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not handled");
vap->iv_stats.is_rx_mgtdiscard++;
break;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "mgt", "subtype 0x%x not handled", subtype);
vap->iv_stats.is_rx_badsubtype++;
break;
}
}
#undef IEEE80211_VERIFY_LENGTH
#undef IEEE80211_VERIFY_ELEMENT
static void
ahdemo_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
int subtype, const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame *wh;
/*
* Process management frames when scanning; useful for doing
* a site-survey.
*/
if (ic->ic_flags & IEEE80211_F_SCAN)
adhoc_recv_mgmt(ni, m0, subtype, rxs, rssi, nf);
else {
wh = mtod(m0, struct ieee80211_frame *);
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_BEACON:
case IEEE80211_FC0_SUBTYPE_ATIM:
case IEEE80211_FC0_SUBTYPE_DISASSOC:
case IEEE80211_FC0_SUBTYPE_AUTH:
case IEEE80211_FC0_SUBTYPE_DEAUTH:
case IEEE80211_FC0_SUBTYPE_ACTION:
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not handled");
vap->iv_stats.is_rx_mgtdiscard++;
break;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "mgt", "subtype 0x%x not handled", subtype);
vap->iv_stats.is_rx_badsubtype++;
break;
}
}
}
static void
adhoc_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BAR:
ieee80211_recv_bar(ni, m);
break;
}
}
Reference in New Issue View Git Blame Copy Permalink