d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
eacc51c5b6
freebsd-nq/sys/net80211/ieee80211_node.h
Sam Leffler 68e8e04e93 Update 802.11 wireless support: 
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00

324 lines
14 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_NODE_H_
#define _NET80211_IEEE80211_NODE_H_
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_nodestats */
#include <net80211/ieee80211_ht.h> /* for aggregation state */
/*
* Each ieee80211com instance has a single timer that fires once a
* second. This is used to initiate various work depending on the
* state of the instance: scanning (passive or active), ``transition''
* (waiting for a response to a management frame when operating
* as a station), and node inactivity processing (when operating
* as an AP). For inactivity processing each node has a timeout
* set in it's ni_inact field that is decremented on each timeout
* and the node is reclaimed when the counter goes to zero. We
* use different inactivity timeout values depending on whether
* the node is associated and authorized (either by 802.1x or
* open/shared key authentication) or associated but yet to be
* authorized. The latter timeout is shorter to more aggressively
* reclaim nodes that leave part way through the 802.1x exchange.
*/
#define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */
#define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */
#define IEEE80211_INACT_AUTH (180/IEEE80211_INACT_WAIT) /* associated but not authorized */
#define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */
#define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */
#define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */
#define IEEE80211_TRANS_WAIT 2 /* mgt frame tx timer (secs) */
#define IEEE80211_NODE_HASHSIZE 32
/* simple hash is enough for variation of macaddr */
#define IEEE80211_NODE_HASH(addr) \
(((const uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % \
IEEE80211_NODE_HASHSIZE)
struct ieee80211_rsnparms {
uint8_t rsn_mcastcipher; /* mcast/group cipher */
uint8_t rsn_mcastkeylen; /* mcast key length */
uint8_t rsn_ucastcipherset; /* unicast cipher set */
uint8_t rsn_ucastcipher; /* selected unicast cipher */
uint8_t rsn_ucastkeylen; /* unicast key length */
uint8_t rsn_keymgmtset; /* key mangement algorithms */
uint8_t rsn_keymgmt; /* selected key mgmt algo */
uint16_t rsn_caps; /* capabilities */
};
struct ieee80211_node_table;
struct ieee80211com;
/*
* Node specific information. Note that drivers are expected
* to derive from this structure to add device-specific per-node
* state. This is done by overriding the ic_node_* methods in
* the ieee80211com structure.
*/
struct ieee80211_node {
struct ieee80211com *ni_ic;
struct ieee80211_node_table *ni_table;
TAILQ_ENTRY(ieee80211_node) ni_list;
LIST_ENTRY(ieee80211_node) ni_hash;
u_int ni_refcnt;
u_int ni_scangen; /* gen# for timeout scan */
uint8_t ni_authmode; /* authentication algorithm */
uint8_t ni_ath_flags; /* Atheros feature flags */
/* NB: These must have the same values as IEEE80211_ATHC_* */
#define IEEE80211_NODE_TURBOP 0x0001 /* Turbo prime enable */
#define IEEE80211_NODE_COMP 0x0002 /* Compresssion enable */
#define IEEE80211_NODE_FF 0x0004 /* Fast Frame capable */
#define IEEE80211_NODE_XR 0x0008 /* Atheros WME enable */
#define IEEE80211_NODE_AR 0x0010 /* AR capable */
#define IEEE80211_NODE_BOOST 0x0080
#define IEEE80211_NODE_PSUPDATE 0x0200 /* power save state changed */
#define IEEE80211_NODE_CHWUPDATE 0x0400 /* 11n channel width change */
uint16_t ni_flags; /* special-purpose state */
#define IEEE80211_NODE_AUTH 0x0001 /* authorized for data */
#define IEEE80211_NODE_QOS 0x0002 /* QoS enabled */
#define IEEE80211_NODE_ERP 0x0004 /* ERP enabled */
/* NB: this must have the same value as IEEE80211_FC1_PWR_MGT */
#define IEEE80211_NODE_PWR_MGT 0x0010 /* power save mode enabled */
#define IEEE80211_NODE_AREF 0x0020 /* authentication ref held */
#define IEEE80211_NODE_HT 0x0040 /* HT enabled */
#define IEEE80211_NODE_HTCOMPAT 0x0080 /* HT setup w/ vendor OUI's */
uint16_t ni_ath_defkeyix;/* Atheros def key index */
uint16_t ni_associd; /* assoc response */
uint16_t ni_txpower; /* current transmit power */
uint16_t ni_vlan; /* vlan tag */
uint32_t *ni_challenge; /* shared-key challenge */
uint8_t *ni_wpa_ie; /* captured WPA ie */
uint8_t *ni_rsn_ie; /* captured RSN ie */
uint8_t *ni_wme_ie; /* captured WME ie */
uint8_t *ni_ath_ie; /* captured Atheros ie */
#define IEEE80211_NONQOS_TID 16 /* index for non-QoS sta */
uint16_t ni_txseqs[17]; /* tx seq per-tid */
uint16_t ni_rxseqs[17]; /* rx seq previous per-tid*/
uint32_t ni_rxfragstamp; /* time stamp of last rx frag */
struct mbuf *ni_rxfrag[3]; /* rx frag reassembly */
struct ieee80211_rsnparms ni_rsn; /* RSN/WPA parameters */
struct ieee80211_key ni_ucastkey; /* unicast key */
/* hardware */
uint32_t ni_rstamp; /* recv timestamp */
int8_t ni_rssi; /* recv ssi */
int8_t ni_noise; /* noise floor */
/* header */
uint8_t ni_macaddr[IEEE80211_ADDR_LEN];
uint8_t ni_bssid[IEEE80211_ADDR_LEN];
/* beacon, probe response */
union {
uint8_t data[8];
uint64_t tsf;
} ni_tstamp; /* from last rcv'd beacon */
uint16_t ni_intval; /* beacon interval */
uint16_t ni_capinfo; /* capabilities */
uint8_t ni_esslen;
uint8_t ni_essid[IEEE80211_NWID_LEN];
struct ieee80211_rateset ni_rates; /* negotiated rate set */
struct ieee80211_channel *ni_chan;
uint16_t ni_fhdwell; /* FH only */
uint8_t ni_fhindex; /* FH only */
uint8_t ni_erp; /* ERP from beacon/probe resp */
uint16_t ni_timoff; /* byte offset to TIM ie */
uint8_t ni_dtim_period; /* DTIM period */
uint8_t ni_dtim_count; /* DTIM count for last bcn */
/* 11n state */
uint16_t ni_htcap; /* HT capabilities */
uint8_t ni_htparam; /* HT params */
uint8_t ni_htctlchan; /* HT control channel */
uint8_t ni_ht2ndchan; /* HT 2nd channel */
uint8_t ni_htopmode; /* HT operating mode */
uint8_t ni_htstbc; /* HT */
uint8_t ni_reqcw; /* requested tx channel width */
uint8_t ni_chw; /* negotiated channel width */
struct ieee80211_htrateset ni_htrates; /* negotiated ht rate set */
struct ieee80211_tx_ampdu ni_tx_ampdu[WME_NUM_AC];
struct ieee80211_rx_ampdu ni_rx_ampdu[WME_NUM_TID];
/* others */
int ni_fails; /* failure count to associate */
short ni_inact; /* inactivity mark count */
short ni_inact_reload;/* inactivity reload value */
int ni_txrate; /* index to ni_rates[] */
struct ifqueue ni_savedq; /* ps-poll queue */
struct ieee80211_nodestats ni_stats; /* per-node statistics */
};
MALLOC_DECLARE(M_80211_NODE);
#define IEEE80211_NODE_ATH (IEEE80211_NODE_FF | IEEE80211_NODE_TURBOP)
#define IEEE80211_NODE_AID(ni) IEEE80211_AID(ni->ni_associd)
#define IEEE80211_NODE_STAT(ni,stat) (ni->ni_stats.ns_##stat++)
#define IEEE80211_NODE_STAT_ADD(ni,stat,v) (ni->ni_stats.ns_##stat += v)
#define IEEE80211_NODE_STAT_SET(ni,stat,v) (ni->ni_stats.ns_##stat = v)
static __inline struct ieee80211_node *
ieee80211_ref_node(struct ieee80211_node *ni)
{
ieee80211_node_incref(ni);
return ni;
}
static __inline void
ieee80211_unref_node(struct ieee80211_node **ni)
{
ieee80211_node_decref(*ni);
*ni = NULL; /* guard against use */
}
struct ieee80211com;
void ieee80211_node_attach(struct ieee80211com *);
void ieee80211_node_lateattach(struct ieee80211com *);
void ieee80211_node_detach(struct ieee80211com *);
static __inline int
ieee80211_node_is_authorized(const struct ieee80211_node *ni)
{
return (ni->ni_flags & IEEE80211_NODE_AUTH);
}
void ieee80211_node_authorize(struct ieee80211_node *);
void ieee80211_node_unauthorize(struct ieee80211_node *);
void ieee80211_probe_curchan(struct ieee80211com *, int);
void ieee80211_create_ibss(struct ieee80211com*, struct ieee80211_channel *);
void ieee80211_reset_bss(struct ieee80211com *);
int ieee80211_ibss_merge(struct ieee80211_node *);
struct ieee80211_scan_entry;
int ieee80211_sta_join(struct ieee80211com *,
const struct ieee80211_scan_entry *);
void ieee80211_sta_leave(struct ieee80211com *, struct ieee80211_node *);
/*
* Table of ieee80211_node instances. Each ieee80211com
* has at least one for holding the scan candidates.
* When operating as an access point or in ibss mode there
* is a second table for associated stations or neighbors.
*/
struct ieee80211_node_table {
struct ieee80211com *nt_ic; /* back reference */
ieee80211_node_lock_t nt_nodelock; /* on node table */
TAILQ_HEAD(, ieee80211_node) nt_node; /* information of all nodes */
LIST_HEAD(, ieee80211_node) nt_hash[IEEE80211_NODE_HASHSIZE];
struct ieee80211_node **nt_keyixmap; /* key ix -> node map */
int nt_keyixmax; /* keyixmap size */
const char *nt_name; /* for debugging */
ieee80211_scan_lock_t nt_scanlock; /* on nt_scangen */
u_int nt_scangen; /* gen# for timeout scan */
int nt_inact_init; /* initial node inact setting */
};
struct ieee80211_node *ieee80211_alloc_node(
struct ieee80211_node_table *, const uint8_t *);
struct ieee80211_node *ieee80211_tmp_node(struct ieee80211com *,
const uint8_t *macaddr);
struct ieee80211_node *ieee80211_dup_bss(struct ieee80211_node_table *,
const uint8_t *);
#ifdef IEEE80211_DEBUG_REFCNT
void ieee80211_free_node_debug(struct ieee80211_node *,
const char *func, int line);
struct ieee80211_node *ieee80211_find_node_debug(struct ieee80211_node_table *,
const uint8_t *,
const char *func, int line);
struct ieee80211_node * ieee80211_find_rxnode_debug(struct ieee80211com *,
const struct ieee80211_frame_min *,
const char *func, int line);
struct ieee80211_node * ieee80211_find_rxnode_withkey_debug(
struct ieee80211com *,
const struct ieee80211_frame_min *, uint16_t keyix,
const char *func, int line);
struct ieee80211_node * ieee80211_find_rxnode_withkey_debug(
struct ieee80211com *,
const struct ieee80211_frame_min *, uint16_t keyix,
const char *func, int line);
struct ieee80211_node *ieee80211_find_txnode_debug(struct ieee80211com *,
const uint8_t *,
const char *func, int line);
struct ieee80211_node *ieee80211_find_node_with_ssid_debug(
struct ieee80211_node_table *, const uint8_t *macaddr,
u_int ssidlen, const uint8_t *ssid,
const char *func, int line);
#define ieee80211_free_node(ni) \
ieee80211_free_node_debug(ni, __func__, __LINE__)
#define ieee80211_find_node(nt, mac) \
ieee80211_find_node_debug(nt, mac, __func__, __LINE__)
#define ieee80211_find_rxnode(nt, wh) \
ieee80211_find_rxnode_debug(nt, wh, __func__, __LINE__)
#define ieee80211_find_rxnode_withkey(nt, wh, keyix) \
ieee80211_find_rxnode_withkey_debug(nt, wh, keyix, __func__, __LINE__)
#define ieee80211_find_txnode(nt, mac) \
ieee80211_find_txnode_debug(nt, mac, __func__, __LINE__)
#define ieee80211_find_node_with_ssid(nt, mac, sl, ss) \
ieee80211_find_node_with_ssid_debug(nt, mac, sl, ss, __func__, __LINE__)
#else
void ieee80211_free_node(struct ieee80211_node *);
struct ieee80211_node *ieee80211_find_node(struct ieee80211_node_table *,
const uint8_t *);
struct ieee80211_node * ieee80211_find_rxnode(struct ieee80211com *,
const struct ieee80211_frame_min *);
struct ieee80211_node * ieee80211_find_rxnode_withkey(struct ieee80211com *,
const struct ieee80211_frame_min *, uint16_t keyix);
struct ieee80211_node *ieee80211_find_txnode(struct ieee80211com *,
const uint8_t *);
struct ieee80211_node *ieee80211_find_node_with_ssid(
struct ieee80211_node_table *, const uint8_t *macaddr,
u_int ssidlen, const uint8_t *ssid);
#endif
int ieee80211_node_delucastkey(struct ieee80211_node *);
void ieee80211_node_timeout(void *arg);
typedef void ieee80211_iter_func(void *, struct ieee80211_node *);
void ieee80211_iterate_nodes(struct ieee80211_node_table *,
ieee80211_iter_func *, void *);
void ieee80211_dump_node(struct ieee80211_node_table *,
struct ieee80211_node *);
void ieee80211_dump_nodes(struct ieee80211_node_table *);
struct ieee80211_node *ieee80211_fakeup_adhoc_node(
struct ieee80211_node_table *, const uint8_t macaddr[]);
struct ieee80211_scanparams;
void ieee80211_init_neighbor(struct ieee80211_node *,
const struct ieee80211_frame *,
const struct ieee80211_scanparams *);
struct ieee80211_node *ieee80211_add_neighbor(struct ieee80211com *,
const struct ieee80211_frame *,
const struct ieee80211_scanparams *);
void ieee80211_node_join(struct ieee80211com *, struct ieee80211_node *,int);
void ieee80211_node_leave(struct ieee80211com *, struct ieee80211_node *);
int8_t ieee80211_getrssi(struct ieee80211com *);
void ieee80211_getsignal(struct ieee80211com *, int8_t *, int8_t *);
#endif /* _NET80211_IEEE80211_NODE_H_ */
Reference in New Issue View Git Blame Copy Permalink