freebsd-nq/sys/dev/usb/net/if_udav.c
Marius Strobl 3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00

859 lines
20 KiB
C

/* $NetBSD: if_udav.c,v 1.2 2003/09/04 15:17:38 tsutsui Exp $ */
/* $nabe: if_udav.c,v 1.3 2003/08/21 16:57:19 nabe Exp $ */
/* $FreeBSD$ */
/*-
* Copyright (c) 2003
* Shingo WATANABE <nabe@nabechan.org>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* DM9601(DAVICOM USB to Ethernet MAC Controller with Integrated 10/100 PHY)
* The spec can be found at the following url.
* http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf
*/
/*
* TODO:
* Interrupt Endpoint support
* External PHYs
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include "usbdevs.h"
#define USB_DEBUG_VAR udav_debug
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/net/usb_ethernet.h>
#include <dev/usb/net/if_udavreg.h>
/* prototypes */
static device_probe_t udav_probe;
static device_attach_t udav_attach;
static device_detach_t udav_detach;
static usb_callback_t udav_bulk_write_callback;
static usb_callback_t udav_bulk_read_callback;
static usb_callback_t udav_intr_callback;
static uether_fn_t udav_attach_post;
static uether_fn_t udav_init;
static uether_fn_t udav_stop;
static uether_fn_t udav_start;
static uether_fn_t udav_tick;
static uether_fn_t udav_setmulti;
static uether_fn_t udav_setpromisc;
static int udav_csr_read(struct udav_softc *, uint16_t, void *, int);
static int udav_csr_write(struct udav_softc *, uint16_t, void *, int);
static uint8_t udav_csr_read1(struct udav_softc *, uint16_t);
static int udav_csr_write1(struct udav_softc *, uint16_t, uint8_t);
static void udav_reset(struct udav_softc *);
static int udav_ifmedia_upd(struct ifnet *);
static void udav_ifmedia_status(struct ifnet *, struct ifmediareq *);
static miibus_readreg_t udav_miibus_readreg;
static miibus_writereg_t udav_miibus_writereg;
static miibus_statchg_t udav_miibus_statchg;
static const struct usb_config udav_config[UDAV_N_TRANSFER] = {
[UDAV_BULK_DT_WR] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.bufsize = (MCLBYTES + 2),
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
.callback = udav_bulk_write_callback,
.timeout = 10000, /* 10 seconds */
},
[UDAV_BULK_DT_RD] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_IN,
.bufsize = (MCLBYTES + 3),
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.callback = udav_bulk_read_callback,
.timeout = 0, /* no timeout */
},
[UDAV_INTR_DT_RD] = {
.type = UE_INTERRUPT,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_IN,
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.bufsize = 0, /* use wMaxPacketSize */
.callback = udav_intr_callback,
},
};
static device_method_t udav_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, udav_probe),
DEVMETHOD(device_attach, udav_attach),
DEVMETHOD(device_detach, udav_detach),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, udav_miibus_readreg),
DEVMETHOD(miibus_writereg, udav_miibus_writereg),
DEVMETHOD(miibus_statchg, udav_miibus_statchg),
{0, 0}
};
static driver_t udav_driver = {
.name = "udav",
.methods = udav_methods,
.size = sizeof(struct udav_softc),
};
static devclass_t udav_devclass;
DRIVER_MODULE(udav, uhub, udav_driver, udav_devclass, NULL, 0);
DRIVER_MODULE(miibus, udav, miibus_driver, miibus_devclass, 0, 0);
MODULE_DEPEND(udav, uether, 1, 1, 1);
MODULE_DEPEND(udav, usb, 1, 1, 1);
MODULE_DEPEND(udav, ether, 1, 1, 1);
MODULE_DEPEND(udav, miibus, 1, 1, 1);
MODULE_VERSION(udav, 1);
static const struct usb_ether_methods udav_ue_methods = {
.ue_attach_post = udav_attach_post,
.ue_start = udav_start,
.ue_init = udav_init,
.ue_stop = udav_stop,
.ue_tick = udav_tick,
.ue_setmulti = udav_setmulti,
.ue_setpromisc = udav_setpromisc,
.ue_mii_upd = udav_ifmedia_upd,
.ue_mii_sts = udav_ifmedia_status,
};
#ifdef USB_DEBUG
static int udav_debug = 0;
SYSCTL_NODE(_hw_usb, OID_AUTO, udav, CTLFLAG_RW, 0, "USB udav");
SYSCTL_INT(_hw_usb_udav, OID_AUTO, debug, CTLFLAG_RW, &udav_debug, 0,
"Debug level");
#endif
#define UDAV_SETBIT(sc, reg, x) \
udav_csr_write1(sc, reg, udav_csr_read1(sc, reg) | (x))
#define UDAV_CLRBIT(sc, reg, x) \
udav_csr_write1(sc, reg, udav_csr_read1(sc, reg) & ~(x))
static const struct usb_device_id udav_devs[] = {
/* ShanTou DM9601 USB NIC */
{USB_VPI(USB_VENDOR_SHANTOU, USB_PRODUCT_SHANTOU_DM9601, 0)},
/* ShanTou ST268 USB NIC */
{USB_VPI(USB_VENDOR_SHANTOU, USB_PRODUCT_SHANTOU_ST268, 0)},
/* Corega USB-TXC */
{USB_VPI(USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TXC, 0)},
/* ShanTou AMD8515 USB NIC */
{USB_VPI(USB_VENDOR_SHANTOU, USB_PRODUCT_SHANTOU_ADM8515, 0)},
/* Kontron AG USB Ethernet */
{USB_VPI(USB_VENDOR_KONTRON, USB_PRODUCT_KONTRON_DM9601, 0)},
};
static void
udav_attach_post(struct usb_ether *ue)
{
struct udav_softc *sc = uether_getsc(ue);
/* reset the adapter */
udav_reset(sc);
/* Get Ethernet Address */
udav_csr_read(sc, UDAV_PAR, ue->ue_eaddr, ETHER_ADDR_LEN);
}
static int
udav_probe(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
if (uaa->usb_mode != USB_MODE_HOST)
return (ENXIO);
if (uaa->info.bConfigIndex != UDAV_CONFIG_INDEX)
return (ENXIO);
if (uaa->info.bIfaceIndex != UDAV_IFACE_INDEX)
return (ENXIO);
return (usbd_lookup_id_by_uaa(udav_devs, sizeof(udav_devs), uaa));
}
static int
udav_attach(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct udav_softc *sc = device_get_softc(dev);
struct usb_ether *ue = &sc->sc_ue;
uint8_t iface_index;
int error;
sc->sc_flags = USB_GET_DRIVER_INFO(uaa);
device_set_usb_desc(dev);
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
iface_index = UDAV_IFACE_INDEX;
error = usbd_transfer_setup(uaa->device, &iface_index,
sc->sc_xfer, udav_config, UDAV_N_TRANSFER, sc, &sc->sc_mtx);
if (error) {
device_printf(dev, "allocating USB transfers failed\n");
goto detach;
}
ue->ue_sc = sc;
ue->ue_dev = dev;
ue->ue_udev = uaa->device;
ue->ue_mtx = &sc->sc_mtx;
ue->ue_methods = &udav_ue_methods;
error = uether_ifattach(ue);
if (error) {
device_printf(dev, "could not attach interface\n");
goto detach;
}
return (0); /* success */
detach:
udav_detach(dev);
return (ENXIO); /* failure */
}
static int
udav_detach(device_t dev)
{
struct udav_softc *sc = device_get_softc(dev);
struct usb_ether *ue = &sc->sc_ue;
usbd_transfer_unsetup(sc->sc_xfer, UDAV_N_TRANSFER);
uether_ifdetach(ue);
mtx_destroy(&sc->sc_mtx);
return (0);
}
#if 0
static int
udav_mem_read(struct udav_softc *sc, uint16_t offset, void *buf,
int len)
{
struct usb_device_request req;
len &= 0xff;
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = UDAV_REQ_MEM_READ;
USETW(req.wValue, 0x0000);
USETW(req.wIndex, offset);
USETW(req.wLength, len);
return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
}
static int
udav_mem_write(struct udav_softc *sc, uint16_t offset, void *buf,
int len)
{
struct usb_device_request req;
len &= 0xff;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = UDAV_REQ_MEM_WRITE;
USETW(req.wValue, 0x0000);
USETW(req.wIndex, offset);
USETW(req.wLength, len);
return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
}
static int
udav_mem_write1(struct udav_softc *sc, uint16_t offset,
uint8_t ch)
{
struct usb_device_request req;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = UDAV_REQ_MEM_WRITE1;
USETW(req.wValue, ch);
USETW(req.wIndex, offset);
USETW(req.wLength, 0x0000);
return (uether_do_request(&sc->sc_ue, &req, NULL, 1000));
}
#endif
static int
udav_csr_read(struct udav_softc *sc, uint16_t offset, void *buf, int len)
{
struct usb_device_request req;
len &= 0xff;
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = UDAV_REQ_REG_READ;
USETW(req.wValue, 0x0000);
USETW(req.wIndex, offset);
USETW(req.wLength, len);
return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
}
static int
udav_csr_write(struct udav_softc *sc, uint16_t offset, void *buf, int len)
{
struct usb_device_request req;
offset &= 0xff;
len &= 0xff;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = UDAV_REQ_REG_WRITE;
USETW(req.wValue, 0x0000);
USETW(req.wIndex, offset);
USETW(req.wLength, len);
return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
}
static uint8_t
udav_csr_read1(struct udav_softc *sc, uint16_t offset)
{
uint8_t val;
udav_csr_read(sc, offset, &val, 1);
return (val);
}
static int
udav_csr_write1(struct udav_softc *sc, uint16_t offset,
uint8_t ch)
{
struct usb_device_request req;
offset &= 0xff;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = UDAV_REQ_REG_WRITE1;
USETW(req.wValue, ch);
USETW(req.wIndex, offset);
USETW(req.wLength, 0x0000);
return (uether_do_request(&sc->sc_ue, &req, NULL, 1000));
}
static void
udav_init(struct usb_ether *ue)
{
struct udav_softc *sc = ue->ue_sc;
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
UDAV_LOCK_ASSERT(sc, MA_OWNED);
/*
* Cancel pending I/O
*/
udav_stop(ue);
/* set MAC address */
udav_csr_write(sc, UDAV_PAR, IF_LLADDR(ifp), ETHER_ADDR_LEN);
/* initialize network control register */
/* disable loopback */
UDAV_CLRBIT(sc, UDAV_NCR, UDAV_NCR_LBK0 | UDAV_NCR_LBK1);
/* Initialize RX control register */
UDAV_SETBIT(sc, UDAV_RCR, UDAV_RCR_DIS_LONG | UDAV_RCR_DIS_CRC);
/* load multicast filter and update promiscious mode bit */
udav_setpromisc(ue);
/* enable RX */
UDAV_SETBIT(sc, UDAV_RCR, UDAV_RCR_RXEN);
/* clear POWER_DOWN state of internal PHY */
UDAV_SETBIT(sc, UDAV_GPCR, UDAV_GPCR_GEP_CNTL0);
UDAV_CLRBIT(sc, UDAV_GPR, UDAV_GPR_GEPIO0);
usbd_xfer_set_stall(sc->sc_xfer[UDAV_BULK_DT_WR]);
ifp->if_drv_flags |= IFF_DRV_RUNNING;
udav_start(ue);
}
static void
udav_reset(struct udav_softc *sc)
{
int i;
/* Select PHY */
#if 1
/*
* XXX: force select internal phy.
* external phy routines are not tested.
*/
UDAV_CLRBIT(sc, UDAV_NCR, UDAV_NCR_EXT_PHY);
#else
if (sc->sc_flags & UDAV_EXT_PHY)
UDAV_SETBIT(sc, UDAV_NCR, UDAV_NCR_EXT_PHY);
else
UDAV_CLRBIT(sc, UDAV_NCR, UDAV_NCR_EXT_PHY);
#endif
UDAV_SETBIT(sc, UDAV_NCR, UDAV_NCR_RST);
for (i = 0; i < UDAV_TX_TIMEOUT; i++) {
if (!(udav_csr_read1(sc, UDAV_NCR) & UDAV_NCR_RST))
break;
if (uether_pause(&sc->sc_ue, hz / 100))
break;
}
uether_pause(&sc->sc_ue, hz / 100);
}
#define UDAV_BITS 6
static void
udav_setmulti(struct usb_ether *ue)
{
struct udav_softc *sc = ue->ue_sc;
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
struct ifmultiaddr *ifma;
uint8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
int h = 0;
UDAV_LOCK_ASSERT(sc, MA_OWNED);
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
UDAV_SETBIT(sc, UDAV_RCR, UDAV_RCR_ALL|UDAV_RCR_PRMSC);
return;
}
/* first, zot all the existing hash bits */
memset(hashtbl, 0x00, sizeof(hashtbl));
hashtbl[7] |= 0x80; /* broadcast address */
udav_csr_write(sc, UDAV_MAR, hashtbl, sizeof(hashtbl));
/* now program new ones */
if_maddr_rlock(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link)
{
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
hashtbl[h / 8] |= 1 << (h % 8);
}
if_maddr_runlock(ifp);
/* disable all multicast */
UDAV_CLRBIT(sc, UDAV_RCR, UDAV_RCR_ALL);
/* write hash value to the register */
udav_csr_write(sc, UDAV_MAR, hashtbl, sizeof(hashtbl));
}
static void
udav_setpromisc(struct usb_ether *ue)
{
struct udav_softc *sc = ue->ue_sc;
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
uint8_t rxmode;
rxmode = udav_csr_read1(sc, UDAV_RCR);
rxmode &= ~(UDAV_RCR_ALL | UDAV_RCR_PRMSC);
if (ifp->if_flags & IFF_PROMISC)
rxmode |= UDAV_RCR_ALL | UDAV_RCR_PRMSC;
else if (ifp->if_flags & IFF_ALLMULTI)
rxmode |= UDAV_RCR_ALL;
/* write new mode bits */
udav_csr_write1(sc, UDAV_RCR, rxmode);
}
static void
udav_start(struct usb_ether *ue)
{
struct udav_softc *sc = ue->ue_sc;
/*
* start the USB transfers, if not already started:
*/
usbd_transfer_start(sc->sc_xfer[UDAV_INTR_DT_RD]);
usbd_transfer_start(sc->sc_xfer[UDAV_BULK_DT_RD]);
usbd_transfer_start(sc->sc_xfer[UDAV_BULK_DT_WR]);
}
static void
udav_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct udav_softc *sc = usbd_xfer_softc(xfer);
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
struct usb_page_cache *pc;
struct mbuf *m;
int extra_len;
int temp_len;
uint8_t buf[2];
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(11, "transfer complete\n");
ifp->if_opackets++;
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
if ((sc->sc_flags & UDAV_FLAG_LINK) == 0) {
/*
* don't send anything if there is no link !
*/
return;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
return;
if (m->m_pkthdr.len > MCLBYTES)
m->m_pkthdr.len = MCLBYTES;
if (m->m_pkthdr.len < UDAV_MIN_FRAME_LEN) {
extra_len = UDAV_MIN_FRAME_LEN - m->m_pkthdr.len;
} else {
extra_len = 0;
}
temp_len = (m->m_pkthdr.len + extra_len);
/*
* the frame length is specified in the first 2 bytes of the
* buffer
*/
buf[0] = (uint8_t)(temp_len);
buf[1] = (uint8_t)(temp_len >> 8);
temp_len += 2;
pc = usbd_xfer_get_frame(xfer, 0);
usbd_copy_in(pc, 0, buf, 2);
usbd_m_copy_in(pc, 2, m, 0, m->m_pkthdr.len);
if (extra_len)
usbd_frame_zero(pc, temp_len - extra_len, extra_len);
/*
* if there's a BPF listener, bounce a copy
* of this frame to him:
*/
BPF_MTAP(ifp, m);
m_freem(m);
usbd_xfer_set_frame_len(xfer, 0, temp_len);
usbd_transfer_submit(xfer);
return;
default: /* Error */
DPRINTFN(11, "transfer error, %s\n",
usbd_errstr(error));
ifp->if_oerrors++;
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
udav_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct udav_softc *sc = usbd_xfer_softc(xfer);
struct usb_ether *ue = &sc->sc_ue;
struct ifnet *ifp = uether_getifp(ue);
struct usb_page_cache *pc;
struct udav_rxpkt stat;
int len;
int actlen;
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
if (actlen < sizeof(stat) + ETHER_CRC_LEN) {
ifp->if_ierrors++;
goto tr_setup;
}
pc = usbd_xfer_get_frame(xfer, 0);
usbd_copy_out(pc, 0, &stat, sizeof(stat));
actlen -= sizeof(stat);
len = min(actlen, le16toh(stat.pktlen));
len -= ETHER_CRC_LEN;
if (stat.rxstat & UDAV_RSR_LCS) {
ifp->if_collisions++;
goto tr_setup;
}
if (stat.rxstat & UDAV_RSR_ERR) {
ifp->if_ierrors++;
goto tr_setup;
}
uether_rxbuf(ue, pc, sizeof(stat), len);
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
uether_rxflush(ue);
return;
default: /* Error */
DPRINTF("bulk read error, %s\n",
usbd_errstr(error));
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
udav_intr_callback(struct usb_xfer *xfer, usb_error_t error)
{
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
case USB_ST_SETUP:
tr_setup:
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
return;
default: /* Error */
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
udav_stop(struct usb_ether *ue)
{
struct udav_softc *sc = ue->ue_sc;
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
UDAV_LOCK_ASSERT(sc, MA_OWNED);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
sc->sc_flags &= ~UDAV_FLAG_LINK;
/*
* stop all the transfers, if not already stopped:
*/
usbd_transfer_stop(sc->sc_xfer[UDAV_BULK_DT_WR]);
usbd_transfer_stop(sc->sc_xfer[UDAV_BULK_DT_RD]);
usbd_transfer_stop(sc->sc_xfer[UDAV_INTR_DT_RD]);
udav_reset(sc);
}
static int
udav_ifmedia_upd(struct ifnet *ifp)
{
struct udav_softc *sc = ifp->if_softc;
struct mii_data *mii = GET_MII(sc);
struct mii_softc *miisc;
UDAV_LOCK_ASSERT(sc, MA_OWNED);
sc->sc_flags &= ~UDAV_FLAG_LINK;
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
PHY_RESET(miisc);
mii_mediachg(mii);
return (0);
}
static void
udav_ifmedia_status(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct udav_softc *sc = ifp->if_softc;
struct mii_data *mii = GET_MII(sc);
UDAV_LOCK(sc);
mii_pollstat(mii);
UDAV_UNLOCK(sc);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
}
static void
udav_tick(struct usb_ether *ue)
{
struct udav_softc *sc = ue->ue_sc;
struct mii_data *mii = GET_MII(sc);
UDAV_LOCK_ASSERT(sc, MA_OWNED);
mii_tick(mii);
if ((sc->sc_flags & UDAV_FLAG_LINK) == 0
&& mii->mii_media_status & IFM_ACTIVE &&
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
sc->sc_flags |= UDAV_FLAG_LINK;
udav_start(ue);
}
}
static int
udav_miibus_readreg(device_t dev, int phy, int reg)
{
struct udav_softc *sc = device_get_softc(dev);
uint16_t data16;
uint8_t val[2];
int locked;
/* XXX: one PHY only for the internal PHY */
if (phy != 0)
return (0);
locked = mtx_owned(&sc->sc_mtx);
if (!locked)
UDAV_LOCK(sc);
/* select internal PHY and set PHY register address */
udav_csr_write1(sc, UDAV_EPAR,
UDAV_EPAR_PHY_ADR0 | (reg & UDAV_EPAR_EROA_MASK));
/* select PHY operation and start read command */
udav_csr_write1(sc, UDAV_EPCR, UDAV_EPCR_EPOS | UDAV_EPCR_ERPRR);
/* XXX: should we wait? */
/* end read command */
UDAV_CLRBIT(sc, UDAV_EPCR, UDAV_EPCR_ERPRR);
/* retrieve the result from data registers */
udav_csr_read(sc, UDAV_EPDRL, val, 2);
data16 = (val[0] | (val[1] << 8));
DPRINTFN(11, "phy=%d reg=0x%04x => 0x%04x\n",
phy, reg, data16);
if (!locked)
UDAV_UNLOCK(sc);
return (data16);
}
static int
udav_miibus_writereg(device_t dev, int phy, int reg, int data)
{
struct udav_softc *sc = device_get_softc(dev);
uint8_t val[2];
int locked;
/* XXX: one PHY only for the internal PHY */
if (phy != 0)
return (0);
locked = mtx_owned(&sc->sc_mtx);
if (!locked)
UDAV_LOCK(sc);
/* select internal PHY and set PHY register address */
udav_csr_write1(sc, UDAV_EPAR,
UDAV_EPAR_PHY_ADR0 | (reg & UDAV_EPAR_EROA_MASK));
/* put the value to the data registers */
val[0] = (data & 0xff);
val[1] = (data >> 8) & 0xff;
udav_csr_write(sc, UDAV_EPDRL, val, 2);
/* select PHY operation and start write command */
udav_csr_write1(sc, UDAV_EPCR, UDAV_EPCR_EPOS | UDAV_EPCR_ERPRW);
/* XXX: should we wait? */
/* end write command */
UDAV_CLRBIT(sc, UDAV_EPCR, UDAV_EPCR_ERPRW);
if (!locked)
UDAV_UNLOCK(sc);
return (0);
}
static void
udav_miibus_statchg(device_t dev)
{
/* nothing to do */
}