freebsd-nq/sys/contrib/dev/acpica/dsopcode.c
2005-11-01 22:11:18 +00:00

1318 lines
38 KiB
C

/******************************************************************************
*
* Module Name: dsopcode - Dispatcher Op Region support and handling of
* "control" opcodes
* $Revision: 1.103 $
*
*****************************************************************************/
/******************************************************************************
*
* 1. Copyright Notice
*
* Some or all of this work - Copyright (c) 1999 - 2005, Intel Corp.
* All rights reserved.
*
* 2. License
*
* 2.1. This is your license from Intel Corp. under its intellectual property
* rights. You may have additional license terms from the party that provided
* you this software, covering your right to use that party's intellectual
* property rights.
*
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a
* copy of the source code appearing in this file ("Covered Code") an
* irrevocable, perpetual, worldwide license under Intel's copyrights in the
* base code distributed originally by Intel ("Original Intel Code") to copy,
* make derivatives, distribute, use and display any portion of the Covered
* Code in any form, with the right to sublicense such rights; and
*
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent
* license (with the right to sublicense), under only those claims of Intel
* patents that are infringed by the Original Intel Code, to make, use, sell,
* offer to sell, and import the Covered Code and derivative works thereof
* solely to the minimum extent necessary to exercise the above copyright
* license, and in no event shall the patent license extend to any additions
* to or modifications of the Original Intel Code. No other license or right
* is granted directly or by implication, estoppel or otherwise;
*
* The above copyright and patent license is granted only if the following
* conditions are met:
*
* 3. Conditions
*
* 3.1. Redistribution of Source with Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification with rights to further distribute source must include
* the above Copyright Notice, the above License, this list of Conditions,
* and the following Disclaimer and Export Compliance provision. In addition,
* Licensee must cause all Covered Code to which Licensee contributes to
* contain a file documenting the changes Licensee made to create that Covered
* Code and the date of any change. Licensee must include in that file the
* documentation of any changes made by any predecessor Licensee. Licensee
* must include a prominent statement that the modification is derived,
* directly or indirectly, from Original Intel Code.
*
* 3.2. Redistribution of Source with no Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification without rights to further distribute source must
* include the following Disclaimer and Export Compliance provision in the
* documentation and/or other materials provided with distribution. In
* addition, Licensee may not authorize further sublicense of source of any
* portion of the Covered Code, and must include terms to the effect that the
* license from Licensee to its licensee is limited to the intellectual
* property embodied in the software Licensee provides to its licensee, and
* not to intellectual property embodied in modifications its licensee may
* make.
*
* 3.3. Redistribution of Executable. Redistribution in executable form of any
* substantial portion of the Covered Code or modification must reproduce the
* above Copyright Notice, and the following Disclaimer and Export Compliance
* provision in the documentation and/or other materials provided with the
* distribution.
*
* 3.4. Intel retains all right, title, and interest in and to the Original
* Intel Code.
*
* 3.5. Neither the name Intel nor any other trademark owned or controlled by
* Intel shall be used in advertising or otherwise to promote the sale, use or
* other dealings in products derived from or relating to the Covered Code
* without prior written authorization from Intel.
*
* 4. Disclaimer and Export Compliance
*
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE,
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A
* PARTICULAR PURPOSE.
*
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT,
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY
* LIMITED REMEDY.
*
* 4.3. Licensee shall not export, either directly or indirectly, any of this
* software or system incorporating such software without first obtaining any
* required license or other approval from the U. S. Department of Commerce or
* any other agency or department of the United States Government. In the
* event Licensee exports any such software from the United States or
* re-exports any such software from a foreign destination, Licensee shall
* ensure that the distribution and export/re-export of the software is in
* compliance with all laws, regulations, orders, or other restrictions of the
* U.S. Export Administration Regulations. Licensee agrees that neither it nor
* any of its subsidiaries will export/re-export any technical data, process,
* software, or service, directly or indirectly, to any country for which the
* United States government or any agency thereof requires an export license,
* other governmental approval, or letter of assurance, without first obtaining
* such license, approval or letter.
*
*****************************************************************************/
#define __DSOPCODE_C__
#include <contrib/dev/acpica/acpi.h>
#include <contrib/dev/acpica/acparser.h>
#include <contrib/dev/acpica/amlcode.h>
#include <contrib/dev/acpica/acdispat.h>
#include <contrib/dev/acpica/acinterp.h>
#include <contrib/dev/acpica/acnamesp.h>
#include <contrib/dev/acpica/acevents.h>
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME ("dsopcode")
/* Local prototypes */
static ACPI_STATUS
AcpiDsExecuteArguments (
ACPI_NAMESPACE_NODE *Node,
ACPI_NAMESPACE_NODE *ScopeNode,
UINT32 AmlLength,
UINT8 *AmlStart);
static ACPI_STATUS
AcpiDsInitBufferField (
UINT16 AmlOpcode,
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_OPERAND_OBJECT *BufferDesc,
ACPI_OPERAND_OBJECT *OffsetDesc,
ACPI_OPERAND_OBJECT *LengthDesc,
ACPI_OPERAND_OBJECT *ResultDesc);
/*******************************************************************************
*
* FUNCTION: AcpiDsExecuteArguments
*
* PARAMETERS: Node - Object NS node
* ScopeNode - Parent NS node
* AmlLength - Length of executable AML
* AmlStart - Pointer to the AML
*
* RETURN: Status.
*
* DESCRIPTION: Late (deferred) execution of region or field arguments
*
******************************************************************************/
static ACPI_STATUS
AcpiDsExecuteArguments (
ACPI_NAMESPACE_NODE *Node,
ACPI_NAMESPACE_NODE *ScopeNode,
UINT32 AmlLength,
UINT8 *AmlStart)
{
ACPI_STATUS Status;
ACPI_PARSE_OBJECT *Op;
ACPI_WALK_STATE *WalkState;
ACPI_FUNCTION_TRACE ("DsExecuteArguments");
/*
* Allocate a new parser op to be the root of the parsed tree
*/
Op = AcpiPsAllocOp (AML_INT_EVAL_SUBTREE_OP);
if (!Op)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Save the Node for use in AcpiPsParseAml */
Op->Common.Node = ScopeNode;
/* Create and initialize a new parser state */
WalkState = AcpiDsCreateWalkState (0, NULL, NULL, NULL);
if (!WalkState)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
Status = AcpiDsInitAmlWalk (WalkState, Op, NULL, AmlStart,
AmlLength, NULL, 1);
if (ACPI_FAILURE (Status))
{
AcpiDsDeleteWalkState (WalkState);
goto Cleanup;
}
/* Mark this parse as a deferred opcode */
WalkState->ParseFlags = ACPI_PARSE_DEFERRED_OP;
WalkState->DeferredNode = Node;
/* Pass1: Parse the entire declaration */
Status = AcpiPsParseAml (WalkState);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
/* Get and init the Op created above */
Op->Common.Node = Node;
AcpiPsDeleteParseTree (Op);
/* Evaluate the deferred arguments */
Op = AcpiPsAllocOp (AML_INT_EVAL_SUBTREE_OP);
if (!Op)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
Op->Common.Node = ScopeNode;
/* Create and initialize a new parser state */
WalkState = AcpiDsCreateWalkState (0, NULL, NULL, NULL);
if (!WalkState)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
/* Execute the opcode and arguments */
Status = AcpiDsInitAmlWalk (WalkState, Op, NULL, AmlStart,
AmlLength, NULL, 3);
if (ACPI_FAILURE (Status))
{
AcpiDsDeleteWalkState (WalkState);
goto Cleanup;
}
/* Mark this execution as a deferred opcode */
WalkState->DeferredNode = Node;
Status = AcpiPsParseAml (WalkState);
Cleanup:
AcpiPsDeleteParseTree (Op);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsGetBufferFieldArguments
*
* PARAMETERS: ObjDesc - A valid BufferField object
*
* RETURN: Status.
*
* DESCRIPTION: Get BufferField Buffer and Index. This implements the late
* evaluation of these field attributes.
*
******************************************************************************/
ACPI_STATUS
AcpiDsGetBufferFieldArguments (
ACPI_OPERAND_OBJECT *ObjDesc)
{
ACPI_OPERAND_OBJECT *ExtraDesc;
ACPI_NAMESPACE_NODE *Node;
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE_PTR ("DsGetBufferFieldArguments", ObjDesc);
if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)
{
return_ACPI_STATUS (AE_OK);
}
/* Get the AML pointer (method object) and BufferField node */
ExtraDesc = AcpiNsGetSecondaryObject (ObjDesc);
Node = ObjDesc->BufferField.Node;
ACPI_DEBUG_EXEC(AcpiUtDisplayInitPathname (ACPI_TYPE_BUFFER_FIELD, Node, NULL));
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
AcpiUtGetNodeName (Node)));
/* Execute the AML code for the TermArg arguments */
Status = AcpiDsExecuteArguments (Node, AcpiNsGetParentNode (Node),
ExtraDesc->Extra.AmlLength, ExtraDesc->Extra.AmlStart);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsGetBufferArguments
*
* PARAMETERS: ObjDesc - A valid Buffer object
*
* RETURN: Status.
*
* DESCRIPTION: Get Buffer length and initializer byte list. This implements
* the late evaluation of these attributes.
*
******************************************************************************/
ACPI_STATUS
AcpiDsGetBufferArguments (
ACPI_OPERAND_OBJECT *ObjDesc)
{
ACPI_NAMESPACE_NODE *Node;
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE_PTR ("DsGetBufferArguments", ObjDesc);
if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)
{
return_ACPI_STATUS (AE_OK);
}
/* Get the Buffer node */
Node = ObjDesc->Buffer.Node;
if (!Node)
{
ACPI_REPORT_ERROR ((
"No pointer back to NS node in buffer obj %p\n", ObjDesc));
return_ACPI_STATUS (AE_AML_INTERNAL);
}
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Buffer Arg Init\n"));
/* Execute the AML code for the TermArg arguments */
Status = AcpiDsExecuteArguments (Node, Node,
ObjDesc->Buffer.AmlLength, ObjDesc->Buffer.AmlStart);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsGetPackageArguments
*
* PARAMETERS: ObjDesc - A valid Package object
*
* RETURN: Status.
*
* DESCRIPTION: Get Package length and initializer byte list. This implements
* the late evaluation of these attributes.
*
******************************************************************************/
ACPI_STATUS
AcpiDsGetPackageArguments (
ACPI_OPERAND_OBJECT *ObjDesc)
{
ACPI_NAMESPACE_NODE *Node;
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE_PTR ("DsGetPackageArguments", ObjDesc);
if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)
{
return_ACPI_STATUS (AE_OK);
}
/* Get the Package node */
Node = ObjDesc->Package.Node;
if (!Node)
{
ACPI_REPORT_ERROR ((
"No pointer back to NS node in package %p\n", ObjDesc));
return_ACPI_STATUS (AE_AML_INTERNAL);
}
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Package Arg Init\n"));
/* Execute the AML code for the TermArg arguments */
Status = AcpiDsExecuteArguments (Node, Node,
ObjDesc->Package.AmlLength, ObjDesc->Package.AmlStart);
return_ACPI_STATUS (Status);
}
/*****************************************************************************
*
* FUNCTION: AcpiDsGetRegionArguments
*
* PARAMETERS: ObjDesc - A valid region object
*
* RETURN: Status.
*
* DESCRIPTION: Get region address and length. This implements the late
* evaluation of these region attributes.
*
****************************************************************************/
ACPI_STATUS
AcpiDsGetRegionArguments (
ACPI_OPERAND_OBJECT *ObjDesc)
{
ACPI_NAMESPACE_NODE *Node;
ACPI_STATUS Status;
ACPI_OPERAND_OBJECT *ExtraDesc;
ACPI_FUNCTION_TRACE_PTR ("DsGetRegionArguments", ObjDesc);
if (ObjDesc->Region.Flags & AOPOBJ_DATA_VALID)
{
return_ACPI_STATUS (AE_OK);
}
ExtraDesc = AcpiNsGetSecondaryObject (ObjDesc);
if (!ExtraDesc)
{
return_ACPI_STATUS (AE_NOT_EXIST);
}
/* Get the Region node */
Node = ObjDesc->Region.Node;
ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (ACPI_TYPE_REGION, Node, NULL));
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
AcpiUtGetNodeName (Node), ExtraDesc->Extra.AmlStart));
/* Execute the argument AML */
Status = AcpiDsExecuteArguments (Node, AcpiNsGetParentNode (Node),
ExtraDesc->Extra.AmlLength, ExtraDesc->Extra.AmlStart);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsInitializeRegion
*
* PARAMETERS: ObjHandle - Region namespace node
*
* RETURN: Status
*
* DESCRIPTION: Front end to EvInitializeRegion
*
******************************************************************************/
ACPI_STATUS
AcpiDsInitializeRegion (
ACPI_HANDLE ObjHandle)
{
ACPI_OPERAND_OBJECT *ObjDesc;
ACPI_STATUS Status;
ObjDesc = AcpiNsGetAttachedObject (ObjHandle);
/* Namespace is NOT locked */
Status = AcpiEvInitializeRegion (ObjDesc, FALSE);
return (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsInitBufferField
*
* PARAMETERS: AmlOpcode - CreateXxxField
* ObjDesc - BufferField object
* BufferDesc - Host Buffer
* OffsetDesc - Offset into buffer
* LengthDesc - Length of field (CREATE_FIELD_OP only)
* ResultDesc - Where to store the result
*
* RETURN: Status
*
* DESCRIPTION: Perform actual initialization of a buffer field
*
******************************************************************************/
static ACPI_STATUS
AcpiDsInitBufferField (
UINT16 AmlOpcode,
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_OPERAND_OBJECT *BufferDesc,
ACPI_OPERAND_OBJECT *OffsetDesc,
ACPI_OPERAND_OBJECT *LengthDesc,
ACPI_OPERAND_OBJECT *ResultDesc)
{
UINT32 Offset;
UINT32 BitOffset;
UINT32 BitCount;
UINT8 FieldFlags;
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE_PTR ("DsInitBufferField", ObjDesc);
/* Host object must be a Buffer */
if (ACPI_GET_OBJECT_TYPE (BufferDesc) != ACPI_TYPE_BUFFER)
{
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Target of Create Field is not a Buffer object - %s\n",
AcpiUtGetObjectTypeName (BufferDesc)));
Status = AE_AML_OPERAND_TYPE;
goto Cleanup;
}
/*
* The last parameter to all of these opcodes (ResultDesc) started
* out as a NameString, and should therefore now be a NS node
* after resolution in AcpiExResolveOperands().
*/
if (ACPI_GET_DESCRIPTOR_TYPE (ResultDesc) != ACPI_DESC_TYPE_NAMED)
{
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"(%s) destination not a NS Node [%s]\n",
AcpiPsGetOpcodeName (AmlOpcode),
AcpiUtGetDescriptorName (ResultDesc)));
Status = AE_AML_OPERAND_TYPE;
goto Cleanup;
}
Offset = (UINT32) OffsetDesc->Integer.Value;
/*
* Setup the Bit offsets and counts, according to the opcode
*/
switch (AmlOpcode)
{
case AML_CREATE_FIELD_OP:
/* Offset is in bits, count is in bits */
FieldFlags = AML_FIELD_ACCESS_BYTE;
BitOffset = Offset;
BitCount = (UINT32) LengthDesc->Integer.Value;
/* Must have a valid (>0) bit count */
if (BitCount == 0)
{
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Attempt to CreateField of length 0\n"));
Status = AE_AML_OPERAND_VALUE;
goto Cleanup;
}
break;
case AML_CREATE_BIT_FIELD_OP:
/* Offset is in bits, Field is one bit */
BitOffset = Offset;
BitCount = 1;
FieldFlags = AML_FIELD_ACCESS_BYTE;
break;
case AML_CREATE_BYTE_FIELD_OP:
/* Offset is in bytes, field is one byte */
BitOffset = 8 * Offset;
BitCount = 8;
FieldFlags = AML_FIELD_ACCESS_BYTE;
break;
case AML_CREATE_WORD_FIELD_OP:
/* Offset is in bytes, field is one word */
BitOffset = 8 * Offset;
BitCount = 16;
FieldFlags = AML_FIELD_ACCESS_WORD;
break;
case AML_CREATE_DWORD_FIELD_OP:
/* Offset is in bytes, field is one dword */
BitOffset = 8 * Offset;
BitCount = 32;
FieldFlags = AML_FIELD_ACCESS_DWORD;
break;
case AML_CREATE_QWORD_FIELD_OP:
/* Offset is in bytes, field is one qword */
BitOffset = 8 * Offset;
BitCount = 64;
FieldFlags = AML_FIELD_ACCESS_QWORD;
break;
default:
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Unknown field creation opcode %02x\n",
AmlOpcode));
Status = AE_AML_BAD_OPCODE;
goto Cleanup;
}
/* Entire field must fit within the current length of the buffer */
if ((BitOffset + BitCount) >
(8 * (UINT32) BufferDesc->Buffer.Length))
{
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n",
AcpiUtGetNodeName (ResultDesc),
BitOffset + BitCount,
AcpiUtGetNodeName (BufferDesc->Buffer.Node),
8 * (UINT32) BufferDesc->Buffer.Length));
Status = AE_AML_BUFFER_LIMIT;
goto Cleanup;
}
/*
* Initialize areas of the field object that are common to all fields
* For FieldFlags, use LOCK_RULE = 0 (NO_LOCK),
* UPDATE_RULE = 0 (UPDATE_PRESERVE)
*/
Status = AcpiExPrepCommonFieldObject (ObjDesc, FieldFlags, 0,
BitOffset, BitCount);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
ObjDesc->BufferField.BufferObj = BufferDesc;
/* Reference count for BufferDesc inherits ObjDesc count */
BufferDesc->Common.ReferenceCount = (UINT16)
(BufferDesc->Common.ReferenceCount + ObjDesc->Common.ReferenceCount);
Cleanup:
/* Always delete the operands */
AcpiUtRemoveReference (OffsetDesc);
AcpiUtRemoveReference (BufferDesc);
if (AmlOpcode == AML_CREATE_FIELD_OP)
{
AcpiUtRemoveReference (LengthDesc);
}
/* On failure, delete the result descriptor */
if (ACPI_FAILURE (Status))
{
AcpiUtRemoveReference (ResultDesc); /* Result descriptor */
}
else
{
/* Now the address and length are valid for this BufferField */
ObjDesc->BufferField.Flags |= AOPOBJ_DATA_VALID;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsEvalBufferFieldOperands
*
* PARAMETERS: WalkState - Current walk
* Op - A valid BufferField Op object
*
* RETURN: Status
*
* DESCRIPTION: Get BufferField Buffer and Index
* Called from AcpiDsExecEndOp during BufferField parse tree walk
*
******************************************************************************/
ACPI_STATUS
AcpiDsEvalBufferFieldOperands (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op)
{
ACPI_STATUS Status;
ACPI_OPERAND_OBJECT *ObjDesc;
ACPI_NAMESPACE_NODE *Node;
ACPI_PARSE_OBJECT *NextOp;
ACPI_FUNCTION_TRACE_PTR ("DsEvalBufferFieldOperands", Op);
/*
* This is where we evaluate the address and length fields of the
* CreateXxxField declaration
*/
Node = Op->Common.Node;
/* NextOp points to the op that holds the Buffer */
NextOp = Op->Common.Value.Arg;
/* Evaluate/create the address and length operands */
Status = AcpiDsCreateOperands (WalkState, NextOp);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
ObjDesc = AcpiNsGetAttachedObject (Node);
if (!ObjDesc)
{
return_ACPI_STATUS (AE_NOT_EXIST);
}
/* Resolve the operands */
Status = AcpiExResolveOperands (Op->Common.AmlOpcode,
ACPI_WALK_OPERANDS, WalkState);
ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
AcpiPsGetOpcodeName (Op->Common.AmlOpcode),
WalkState->NumOperands, "after AcpiExResolveOperands");
if (ACPI_FAILURE (Status))
{
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "(%s) bad operand(s) (%X)\n",
AcpiPsGetOpcodeName (Op->Common.AmlOpcode), Status));
return_ACPI_STATUS (Status);
}
/* Initialize the Buffer Field */
if (Op->Common.AmlOpcode == AML_CREATE_FIELD_OP)
{
/* NOTE: Slightly different operands for this opcode */
Status = AcpiDsInitBufferField (Op->Common.AmlOpcode, ObjDesc,
WalkState->Operands[0], WalkState->Operands[1],
WalkState->Operands[2], WalkState->Operands[3]);
}
else
{
/* All other, CreateXxxField opcodes */
Status = AcpiDsInitBufferField (Op->Common.AmlOpcode, ObjDesc,
WalkState->Operands[0], WalkState->Operands[1],
NULL, WalkState->Operands[2]);
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsEvalRegionOperands
*
* PARAMETERS: WalkState - Current walk
* Op - A valid region Op object
*
* RETURN: Status
*
* DESCRIPTION: Get region address and length
* Called from AcpiDsExecEndOp during OpRegion parse tree walk
*
******************************************************************************/
ACPI_STATUS
AcpiDsEvalRegionOperands (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op)
{
ACPI_STATUS Status;
ACPI_OPERAND_OBJECT *ObjDesc;
ACPI_OPERAND_OBJECT *OperandDesc;
ACPI_NAMESPACE_NODE *Node;
ACPI_PARSE_OBJECT *NextOp;
ACPI_FUNCTION_TRACE_PTR ("DsEvalRegionOperands", Op);
/*
* This is where we evaluate the address and length fields of the
* OpRegion declaration
*/
Node = Op->Common.Node;
/* NextOp points to the op that holds the SpaceID */
NextOp = Op->Common.Value.Arg;
/* NextOp points to address op */
NextOp = NextOp->Common.Next;
/* Evaluate/create the address and length operands */
Status = AcpiDsCreateOperands (WalkState, NextOp);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Resolve the length and address operands to numbers */
Status = AcpiExResolveOperands (Op->Common.AmlOpcode,
ACPI_WALK_OPERANDS, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
AcpiPsGetOpcodeName (Op->Common.AmlOpcode),
1, "after AcpiExResolveOperands");
ObjDesc = AcpiNsGetAttachedObject (Node);
if (!ObjDesc)
{
return_ACPI_STATUS (AE_NOT_EXIST);
}
/*
* Get the length operand and save it
* (at Top of stack)
*/
OperandDesc = WalkState->Operands[WalkState->NumOperands - 1];
ObjDesc->Region.Length = (UINT32) OperandDesc->Integer.Value;
AcpiUtRemoveReference (OperandDesc);
/*
* Get the address and save it
* (at top of stack - 1)
*/
OperandDesc = WalkState->Operands[WalkState->NumOperands - 2];
ObjDesc->Region.Address = (ACPI_PHYSICAL_ADDRESS)
OperandDesc->Integer.Value;
AcpiUtRemoveReference (OperandDesc);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
ObjDesc,
ACPI_FORMAT_UINT64 (ObjDesc->Region.Address),
ObjDesc->Region.Length));
/* Now the address and length are valid for this opregion */
ObjDesc->Region.Flags |= AOPOBJ_DATA_VALID;
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsEvalDataObjectOperands
*
* PARAMETERS: WalkState - Current walk
* Op - A valid DataObject Op object
* ObjDesc - DataObject
*
* RETURN: Status
*
* DESCRIPTION: Get the operands and complete the following data object types:
* Buffer, Package.
*
******************************************************************************/
ACPI_STATUS
AcpiDsEvalDataObjectOperands (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op,
ACPI_OPERAND_OBJECT *ObjDesc)
{
ACPI_STATUS Status;
ACPI_OPERAND_OBJECT *ArgDesc;
UINT32 Length;
ACPI_FUNCTION_TRACE ("DsEvalDataObjectOperands");
/* The first operand (for all of these data objects) is the length */
Status = AcpiDsCreateOperand (WalkState, Op->Common.Value.Arg, 1);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
Status = AcpiExResolveOperands (WalkState->Opcode,
&(WalkState->Operands [WalkState->NumOperands -1]),
WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Extract length operand */
ArgDesc = WalkState->Operands [WalkState->NumOperands - 1];
Length = (UINT32) ArgDesc->Integer.Value;
/* Cleanup for length operand */
Status = AcpiDsObjStackPop (1, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
AcpiUtRemoveReference (ArgDesc);
/*
* Create the actual data object
*/
switch (Op->Common.AmlOpcode)
{
case AML_BUFFER_OP:
Status = AcpiDsBuildInternalBufferObj (WalkState, Op, Length, &ObjDesc);
break;
case AML_PACKAGE_OP:
case AML_VAR_PACKAGE_OP:
Status = AcpiDsBuildInternalPackageObj (WalkState, Op, Length, &ObjDesc);
break;
default:
return_ACPI_STATUS (AE_AML_BAD_OPCODE);
}
if (ACPI_SUCCESS (Status))
{
/*
* Return the object in the WalkState, unless the parent is a package -
* in this case, the return object will be stored in the parse tree
* for the package.
*/
if ((!Op->Common.Parent) ||
((Op->Common.Parent->Common.AmlOpcode != AML_PACKAGE_OP) &&
(Op->Common.Parent->Common.AmlOpcode != AML_VAR_PACKAGE_OP) &&
(Op->Common.Parent->Common.AmlOpcode != AML_NAME_OP)))
{
WalkState->ResultObj = ObjDesc;
}
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsExecBeginControlOp
*
* PARAMETERS: WalkList - The list that owns the walk stack
* Op - The control Op
*
* RETURN: Status
*
* DESCRIPTION: Handles all control ops encountered during control method
* execution.
*
******************************************************************************/
ACPI_STATUS
AcpiDsExecBeginControlOp (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op)
{
ACPI_STATUS Status = AE_OK;
ACPI_GENERIC_STATE *ControlState;
ACPI_FUNCTION_NAME ("DsExecBeginControlOp");
ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", Op,
Op->Common.AmlOpcode, WalkState));
switch (Op->Common.AmlOpcode)
{
case AML_IF_OP:
case AML_WHILE_OP:
/*
* IF/WHILE: Create a new control state to manage these
* constructs. We need to manage these as a stack, in order
* to handle nesting.
*/
ControlState = AcpiUtCreateControlState ();
if (!ControlState)
{
Status = AE_NO_MEMORY;
break;
}
/*
* Save a pointer to the predicate for multiple executions
* of a loop
*/
ControlState->Control.AmlPredicateStart = WalkState->ParserState.Aml - 1;
ControlState->Control.PackageEnd = WalkState->ParserState.PkgEnd;
ControlState->Control.Opcode = Op->Common.AmlOpcode;
/* Push the control state on this walk's control stack */
AcpiUtPushGenericState (&WalkState->ControlState, ControlState);
break;
case AML_ELSE_OP:
/* Predicate is in the state object */
/* If predicate is true, the IF was executed, ignore ELSE part */
if (WalkState->LastPredicate)
{
Status = AE_CTRL_TRUE;
}
break;
case AML_RETURN_OP:
break;
default:
break;
}
return (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsExecEndControlOp
*
* PARAMETERS: WalkList - The list that owns the walk stack
* Op - The control Op
*
* RETURN: Status
*
* DESCRIPTION: Handles all control ops encountered during control method
* execution.
*
******************************************************************************/
ACPI_STATUS
AcpiDsExecEndControlOp (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op)
{
ACPI_STATUS Status = AE_OK;
ACPI_GENERIC_STATE *ControlState;
ACPI_FUNCTION_NAME ("DsExecEndControlOp");
switch (Op->Common.AmlOpcode)
{
case AML_IF_OP:
ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", Op));
/*
* Save the result of the predicate in case there is an
* ELSE to come
*/
WalkState->LastPredicate =
(BOOLEAN) WalkState->ControlState->Common.Value;
/*
* Pop the control state that was created at the start
* of the IF and free it
*/
ControlState = AcpiUtPopGenericState (&WalkState->ControlState);
AcpiUtDeleteGenericState (ControlState);
break;
case AML_ELSE_OP:
break;
case AML_WHILE_OP:
ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", Op));
if (WalkState->ControlState->Common.Value)
{
/* Predicate was true, go back and evaluate it again! */
Status = AE_CTRL_PENDING;
}
ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
"[WHILE_OP] termination! Op=%p\n",Op));
/* Pop this control state and free it */
ControlState = AcpiUtPopGenericState (&WalkState->ControlState);
WalkState->AmlLastWhile = ControlState->Control.AmlPredicateStart;
AcpiUtDeleteGenericState (ControlState);
break;
case AML_RETURN_OP:
ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
"[RETURN_OP] Op=%p Arg=%p\n",Op, Op->Common.Value.Arg));
/*
* One optional operand -- the return value
* It can be either an immediate operand or a result that
* has been bubbled up the tree
*/
if (Op->Common.Value.Arg)
{
/* Since we have a real Return(), delete any implicit return */
AcpiDsClearImplicitReturn (WalkState);
/* Return statement has an immediate operand */
Status = AcpiDsCreateOperands (WalkState, Op->Common.Value.Arg);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/*
* If value being returned is a Reference (such as
* an arg or local), resolve it now because it may
* cease to exist at the end of the method.
*/
Status = AcpiExResolveToValue (&WalkState->Operands [0], WalkState);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/*
* Get the return value and save as the last result
* value. This is the only place where WalkState->ReturnDesc
* is set to anything other than zero!
*/
WalkState->ReturnDesc = WalkState->Operands[0];
}
else if ((WalkState->Results) &&
(WalkState->Results->Results.NumResults > 0))
{
/* Since we have a real Return(), delete any implicit return */
AcpiDsClearImplicitReturn (WalkState);
/*
* The return value has come from a previous calculation.
*
* If value being returned is a Reference (such as
* an arg or local), resolve it now because it may
* cease to exist at the end of the method.
*
* Allow references created by the Index operator to return unchanged.
*/
if ((ACPI_GET_DESCRIPTOR_TYPE (WalkState->Results->Results.ObjDesc[0]) == ACPI_DESC_TYPE_OPERAND) &&
(ACPI_GET_OBJECT_TYPE (WalkState->Results->Results.ObjDesc [0]) == ACPI_TYPE_LOCAL_REFERENCE) &&
((WalkState->Results->Results.ObjDesc [0])->Reference.Opcode != AML_INDEX_OP))
{
Status = AcpiExResolveToValue (&WalkState->Results->Results.ObjDesc [0], WalkState);
if (ACPI_FAILURE (Status))
{
return (Status);
}
}
WalkState->ReturnDesc = WalkState->Results->Results.ObjDesc [0];
}
else
{
/* No return operand */
if (WalkState->NumOperands)
{
AcpiUtRemoveReference (WalkState->Operands [0]);
}
WalkState->Operands [0] = NULL;
WalkState->NumOperands = 0;
WalkState->ReturnDesc = NULL;
}
ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
"Completed RETURN_OP State=%p, RetVal=%p\n",
WalkState, WalkState->ReturnDesc));
/* End the control method execution right now */
Status = AE_CTRL_TERMINATE;
break;
case AML_NOOP_OP:
/* Just do nothing! */
break;
case AML_BREAK_POINT_OP:
/* Call up to the OS service layer to handle this */
Status = AcpiOsSignal (ACPI_SIGNAL_BREAKPOINT, "Executed AML Breakpoint opcode");
/* If and when it returns, all done. */
break;
case AML_BREAK_OP:
case AML_CONTINUE_OP: /* ACPI 2.0 */
/* Pop and delete control states until we find a while */
while (WalkState->ControlState &&
(WalkState->ControlState->Control.Opcode != AML_WHILE_OP))
{
ControlState = AcpiUtPopGenericState (&WalkState->ControlState);
AcpiUtDeleteGenericState (ControlState);
}
/* No while found? */
if (!WalkState->ControlState)
{
return (AE_AML_NO_WHILE);
}
/* Was: WalkState->AmlLastWhile = WalkState->ControlState->Control.AmlPredicateStart; */
WalkState->AmlLastWhile = WalkState->ControlState->Control.PackageEnd;
/* Return status depending on opcode */
if (Op->Common.AmlOpcode == AML_BREAK_OP)
{
Status = AE_CTRL_BREAK;
}
else
{
Status = AE_CTRL_CONTINUE;
}
break;
default:
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown control opcode=%X Op=%p\n",
Op->Common.AmlOpcode, Op));
Status = AE_AML_BAD_OPCODE;
break;
}
return (Status);
}