eddfbb763d
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
1664 lines
65 KiB
Plaintext
1664 lines
65 KiB
Plaintext
Updating Information for FreeBSD current users
|
|
|
|
This file is maintained and copyrighted by M. Warner Losh
|
|
<imp@village.org>. See end of file for further details. For commonly
|
|
done items, please see the COMMON ITEMS: section later in the file.
|
|
|
|
Items affecting the ports and packages system can be found in
|
|
/usr/ports/UPDATING. Please read that file before running
|
|
portupgrade.
|
|
|
|
NOTE TO PEOPLE WHO THINK THAT FreeBSD 8.x IS SLOW:
|
|
FreeBSD 8.x has many debugging features turned on, in
|
|
both the kernel and userland. These features attempt to detect
|
|
incorrect use of system primitives, and encourage loud failure
|
|
through extra sanity checking and fail stop semantics. They
|
|
also substantially impact system performance. If you want to
|
|
do performance measurement, benchmarking, and optimization,
|
|
you'll want to turn them off. This includes various WITNESS-
|
|
related kernel options, INVARIANTS, malloc debugging flags
|
|
in userland, and various verbose features in the kernel. Many
|
|
developers choose to disable these features on build machines
|
|
to maximize performance. (To disable malloc debugging, run
|
|
ln -s aj /etc/malloc.conf.)
|
|
|
|
20090714:
|
|
Due to changes in the implementation of virtual network stack
|
|
support, all network-related kernel modules must be recompiled.
|
|
As this change breaks the ABI, bump __FreeBSD_version to 800104.
|
|
|
|
20090713:
|
|
The TOE interface to the TCP syncache has been modified to remove struct
|
|
tcpopt (<netinet/tcp_var.h>) from the ABI of the network stack. The
|
|
cxgb driver is the only TOE consumer affected by this change, and needs
|
|
to be recompiled along with the kernel. As this change breaks the ABI,
|
|
bump __FreeBSD_version to 800103.
|
|
|
|
20090712:
|
|
Padding has been added to struct tcpcb, sackhint and tcpstat in
|
|
<netinet/tcp_var.h> to facilitate future MFCs and bug fixes whilst
|
|
maintainig the ABI. However, this change breaks the ABI, so bump
|
|
__FreeBSD_version to 800102. User space tools that rely on the size of
|
|
any of these structs (e.g. sockstat) need to be recompiled.
|
|
|
|
20090630:
|
|
The NFS_LEGACYRPC option has been removed along with the old
|
|
kernel RPC implementation that this option selected. Kernel
|
|
configurations may need to be adjusted.
|
|
|
|
20090629:
|
|
The network interface device nodes at /dev/net/<interface> have
|
|
been removed. All ioctl operations can be performed the normal
|
|
way using routing sockets. The kqueue functionality can
|
|
generally be replaced with routing sockets.
|
|
|
|
20090628:
|
|
The documentation from the FreeBSD Documentation Project
|
|
(Handbook, FAQ, etc.) is now installed via packages by
|
|
sysinstall(8) and under the /usr/local/share/doc/freebsd
|
|
directory instead of /usr/share/doc.
|
|
|
|
20090624:
|
|
The ABI of various structures related to the SYSV IPC API have
|
|
been changed. As a result, the COMPAT_FREEBSD[456] kernel
|
|
options now all require COMPAT_FREEBSD7. Bump __FreeBSD_version
|
|
to 800100.
|
|
|
|
20090622:
|
|
Layout of struct vnet has changed as routing related variables
|
|
were moved to their own Vimage module. Modules need to be
|
|
recompiled. Bump __FreeBSD_version to 800099.
|
|
|
|
20090619:
|
|
NGROUPS_MAX and NGROUPS have been increased from 16 to 1023
|
|
and 1024 respectively. As long as no more than 16 groups per
|
|
process are used, no changes should be visible. When more
|
|
than 16 groups are used, old binaries may fail if they call
|
|
getgroups() or getgrouplist() with statically sized storage.
|
|
Recompiling will work around this, but applications should be
|
|
modified to use dynamically allocated storage for group arrays
|
|
as POSIX.1-2008 does not cap an implementation's number of
|
|
supported groups at NGROUPS_MAX+1 as previous versions did.
|
|
|
|
NFS and portalfs mounts may also be affected as the list of
|
|
groups is truncated to 16. Users of NFS who use more than 16
|
|
groups, should take care that negative group permissions are not
|
|
used on the exported file systems as they will not be reliable
|
|
unless a GSSAPI based authentication method is used.
|
|
|
|
20090616:
|
|
The compiling option ADAPTIVE_LOCKMGRS has been introduced.
|
|
This option compiles in the support for adaptive spinning for lockmgrs
|
|
which want to enable it. The lockinit() function now accepts the
|
|
flag LK_ADAPTIVE in order to make the lock object subject to
|
|
adaptive spinning when both held in write and read mode.
|
|
|
|
20090613:
|
|
The layout of the structure returned by IEEE80211_IOC_STA_INFO
|
|
has changed. User applications that use this ioctl need to be
|
|
rebuilt.
|
|
|
|
20090611:
|
|
The layout of struct thread has changed. Kernel and modules
|
|
need to be rebuilt.
|
|
|
|
20090608:
|
|
The layout of structs ifnet, domain, protosw and vnet_net has
|
|
changed. Kernel modules need to be rebuilt.
|
|
Bump __FreeBSD_version to 800097.
|
|
|
|
20090602:
|
|
window(1) has been removed from the base system. It can now be
|
|
installed from ports. The port is called misc/window.
|
|
|
|
20090601:
|
|
The way we are storing and accessing `routing table' entries
|
|
has changed. Programs reading the FIB, like netstat, need to
|
|
be re-compiled.
|
|
|
|
20090601:
|
|
A new netisr implementation has been added for FreeBSD 8. Network
|
|
file system modules, such as igmp, ipdivert, and others, should be
|
|
rebuilt.
|
|
Bump __FreeBSD_version to 800096.
|
|
|
|
20090530:
|
|
Remove the tunable/sysctl debug.mpsafevfs as its initial purpose
|
|
is no more valid.
|
|
|
|
20090530:
|
|
Add VOP_ACCESSX(9). File system modules need to be rebuilt.
|
|
Bump __FreeBSD_version to 800094.
|
|
|
|
20090529:
|
|
Add mnt_xflag field to 'struct mount'. File system modules
|
|
need to be rebuilt.
|
|
Bump __FreeBSD_version to 800093.
|
|
|
|
20090528:
|
|
The compiling option ADAPTIVE_SX has been retired while it has been
|
|
introduced the option NO_ADAPTIVE_SX which handles the reversed logic.
|
|
The KPI for sx_init_flags() changes as accepting flags:
|
|
SX_ADAPTIVESPIN flag has been retired while the SX_NOADAPTIVE flag
|
|
has been introduced in order to handle the reversed logic.
|
|
Bump __FreeBSD_version to 800092.
|
|
|
|
20090527:
|
|
Add support for hierarchical jails. Remove global securelevel.
|
|
Bump __FreeBSD_version to 800091.
|
|
|
|
20090523:
|
|
The layout of struct vnet_net has changed, therefore modules
|
|
need to be rebuilt.
|
|
Bump __FreeBSD_version to 800090.
|
|
|
|
20090523:
|
|
The newly imported zic(8) produces a new format in the
|
|
output. Please run tzsetup(8) to install the newly created
|
|
data to /etc/localtime.
|
|
|
|
20090520:
|
|
The sysctl tree for the usb stack has renamed from hw.usb2.* to
|
|
hw.usb.* and is now consistent again with previous releases.
|
|
|
|
20090520:
|
|
802.11 monitor mode support was revised and driver api's
|
|
were changed. Drivers dependent on net80211 now support
|
|
DLT_IEEE802_11_RADIO instead of DLT_IEEE802_11. No
|
|
user-visible data structures were changed but applications
|
|
that use DLT_IEEE802_11 may require changes.
|
|
Bump __FreeBSD_version to 800088.
|
|
|
|
20090430:
|
|
The layout of the following structs has changed: sysctl_oid,
|
|
socket, ifnet, inpcbinfo, tcpcb, syncache_head, vnet_inet,
|
|
vnet_inet6 and vnet_ipfw. Most modules need to be rebuild or
|
|
panics may be experienced. World rebuild is required for
|
|
correctly checking networking state from userland.
|
|
Bump __FreeBSD_version to 800085.
|
|
|
|
20090429:
|
|
MLDv2 and Source-Specific Multicast (SSM) have been merged
|
|
to the IPv6 stack. VIMAGE hooks are in but not yet used.
|
|
The implementation of SSM within FreeBSD's IPv6 stack closely
|
|
follows the IPv4 implementation.
|
|
|
|
For kernel developers:
|
|
|
|
* The most important changes are that the ip6_output() and
|
|
ip6_input() paths no longer take the IN6_MULTI_LOCK,
|
|
and this lock has been downgraded to a non-recursive mutex.
|
|
|
|
* As with the changes to the IPv4 stack to support SSM, filtering
|
|
of inbound multicast traffic must now be performed by transport
|
|
protocols within the IPv6 stack. This does not apply to TCP and
|
|
SCTP, however, it does apply to UDP in IPv6 and raw IPv6.
|
|
|
|
* The KPIs used by IPv6 multicast are similar to those used by
|
|
the IPv4 stack, with the following differences:
|
|
* im6o_mc_filter() is analogous to imo_multicast_filter().
|
|
* The legacy KAME entry points in6_joingroup and in6_leavegroup()
|
|
are shimmed to in6_mc_join() and in6_mc_leave() respectively.
|
|
* IN6_LOOKUP_MULTI() has been deprecated and removed.
|
|
* IPv6 relies on MLD for the DAD mechanism. KAME's internal KPIs
|
|
for MLDv1 have an additional 'timer' argument which is used to
|
|
jitter the initial membership report for the solicited-node
|
|
multicast membership on-link.
|
|
* This is not strictly needed for MLDv2, which already jitters
|
|
its report transmissions. However, the 'timer' argument is
|
|
preserved in case MLDv1 is active on the interface.
|
|
|
|
* The KAME linked-list based IPv6 membership implementation has
|
|
been refactored to use a vector similar to that used by the IPv4
|
|
stack.
|
|
Code which maintains a list of its own multicast memberships
|
|
internally, e.g. carp, has been updated to reflect the new
|
|
semantics.
|
|
|
|
* There is a known Lock Order Reversal (LOR) due to in6_setscope()
|
|
acquiring the IF_AFDATA_LOCK and being called within ip6_output().
|
|
Whilst MLDv2 tries to avoid this otherwise benign LOR, it is an
|
|
implementation constraint which needs to be addressed in HEAD.
|
|
|
|
For application developers:
|
|
|
|
* The changes are broadly similar to those made for the IPv4
|
|
stack.
|
|
|
|
* The use of IPv4 and IPv6 multicast socket options on the same
|
|
socket, using mapped addresses, HAS NOT been tested or supported.
|
|
|
|
* There are a number of issues with the implementation of various
|
|
IPv6 multicast APIs which need to be resolved in the API surface
|
|
before the implementation is fully compatible with KAME userland
|
|
use, and these are mostly to do with interface index treatment.
|
|
|
|
* The literature available discusses the use of either the delta / ASM
|
|
API with setsockopt(2)/getsockopt(2), or the full-state / ASM API
|
|
using setsourcefilter(3)/getsourcefilter(3). For more information
|
|
please refer to RFC 3768, 'Socket Interface Extensions for
|
|
Multicast Source Filters'.
|
|
|
|
* Applications which use the published RFC 3678 APIs should be fine.
|
|
|
|
For systems administrators:
|
|
|
|
* The mtest(8) utility has been refactored to support IPv6, in
|
|
addition to IPv4. Interface addresses are no longer accepted
|
|
as arguments, their names must be used instead. The utility
|
|
will map the interface name to its first IPv4 address as
|
|
returned by getifaddrs(3).
|
|
|
|
* The ifmcstat(8) utility has also been updated to print the MLDv2
|
|
endpoint state and source filter lists via sysctl(3).
|
|
|
|
* The net.inet6.ip6.mcast.loop sysctl may be tuned to 0 to disable
|
|
loopback of IPv6 multicast datagrams by default; it defaults to 1
|
|
to preserve the existing behaviour. Disabling multicast loopback is
|
|
recommended for optimal system performance.
|
|
|
|
* The IPv6 MROUTING code has been changed to examine this sysctl
|
|
instead of attempting to perform a group lookup before looping
|
|
back forwarded datagrams.
|
|
|
|
Bump __FreeBSD_version to 800084.
|
|
|
|
20090422:
|
|
Implement low-level Bluetooth HCI API.
|
|
Bump __FreeBSD_version to 800083.
|
|
|
|
20090419:
|
|
The layout of struct malloc_type, used by modules to register new
|
|
memory allocation types, has changed. Most modules will need to
|
|
be rebuilt or panics may be experienced.
|
|
Bump __FreeBSD_version to 800081.
|
|
|
|
20090415:
|
|
Anticipate overflowing inp_flags - add inp_flags2.
|
|
This changes most offsets in inpcb, so checking v4 connection
|
|
state will require a world rebuild.
|
|
Bump __FreeBSD_version to 800080.
|
|
|
|
20090415:
|
|
Add an llentry to struct route and struct route_in6. Modules
|
|
embedding a struct route will need to be recompiled.
|
|
Bump __FreeBSD_version to 800079.
|
|
|
|
20090414:
|
|
The size of rt_metrics_lite and by extension rtentry has changed.
|
|
Networking administration apps will need to be recompiled.
|
|
The route command now supports show as an alias for get, weighting
|
|
of routes, sticky and nostick flags to alter the behavior of stateful
|
|
load balancing.
|
|
Bump __FreeBSD_version to 800078.
|
|
|
|
20090408:
|
|
Do not use Giant for kbdmux(4) locking. This is wrong and
|
|
apparently causing more problems than it solves. This will
|
|
re-open the issue where interrupt handlers may race with
|
|
kbdmux(4) in polling mode. Typical symptoms include (but
|
|
not limited to) duplicated and/or missing characters when
|
|
low level console functions (such as gets) are used while
|
|
interrupts are enabled (for example geli password prompt,
|
|
mountroot prompt etc.). Disabling kbdmux(4) may help.
|
|
|
|
20090407:
|
|
The size of structs vnet_net, vnet_inet and vnet_ipfw has changed;
|
|
kernel modules referencing any of the above need to be recompiled.
|
|
Bump __FreeBSD_version to 800075.
|
|
|
|
20090320:
|
|
GEOM_PART has become the default partition slicer for storage devices,
|
|
replacing GEOM_MBR, GEOM_BSD, GEOM_PC98 and GEOM_GPT slicers. It
|
|
introduces some changes:
|
|
|
|
MSDOS/EBR: the devices created from MSDOS extended partition entries
|
|
(EBR) can be named differently than with GEOM_MBR and are now symlinks
|
|
to devices with offset-based names. fstabs may need to be modified.
|
|
|
|
BSD: the "geometry does not match label" warning is harmless in most
|
|
cases but it points to problems in file system misalignment with
|
|
disk geometry. The "c" partition is now implicit, covers the whole
|
|
top-level drive and cannot be (mis)used by users.
|
|
|
|
General: Kernel dumps are now not allowed to be written to devices
|
|
whose partition types indicate they are meant to be used for file
|
|
systems (or, in case of MSDOS partitions, as something else than
|
|
the "386BSD" type).
|
|
|
|
Most of these changes date approximately from 200812.
|
|
|
|
20090319:
|
|
The uscanner(4) driver has been removed from the kernel. This follows
|
|
Linux removing theirs in 2.6 and making libusb the default interface
|
|
(supported by sane).
|
|
|
|
20090319:
|
|
The multicast forwarding code has been cleaned up. netstat(1)
|
|
only relies on KVM now for printing bandwidth upcall meters.
|
|
The IPv4 and IPv6 modules are split into ip_mroute_mod and
|
|
ip6_mroute_mod respectively. The config(5) options for statically
|
|
compiling this code remain the same, i.e. 'options MROUTING'.
|
|
|
|
20090315:
|
|
Support for the IFF_NEEDSGIANT network interface flag has been
|
|
removed, which means that non-MPSAFE network device drivers are no
|
|
longer supported. In particular, if_ar, if_sr, and network device
|
|
drivers from the old (legacy) USB stack can no longer be built or
|
|
used.
|
|
|
|
20090313:
|
|
POSIX.1 Native Language Support (NLS) has been enabled in libc and
|
|
a bunch of new language catalog files have also been added.
|
|
This means that some common libc messages are now localized and
|
|
they depend on the LC_MESSAGES environmental variable.
|
|
|
|
20090313:
|
|
The k8temp(4) driver has been renamed to amdtemp(4) since
|
|
support for K10 and K11 CPU families was added.
|
|
|
|
20090309:
|
|
IGMPv3 and Source-Specific Multicast (SSM) have been merged
|
|
to the IPv4 stack. VIMAGE hooks are in but not yet used.
|
|
|
|
For kernel developers, the most important changes are that the
|
|
ip_output() and ip_input() paths no longer take the IN_MULTI_LOCK(),
|
|
and this lock has been downgraded to a non-recursive mutex.
|
|
|
|
Transport protocols (UDP, Raw IP) are now responsible for filtering
|
|
inbound multicast traffic according to group membership and source
|
|
filters. The imo_multicast_filter() KPI exists for this purpose.
|
|
Transports which do not use multicast (SCTP, TCP) already reject
|
|
multicast by default. Forwarding and receive performance may improve
|
|
as a mutex acquisition is no longer needed in the ip_input()
|
|
low-level input path. in_addmulti() and in_delmulti() are shimmed
|
|
to new KPIs which exist to support SSM in-kernel.
|
|
|
|
For application developers, it is recommended that loopback of
|
|
multicast datagrams be disabled for best performance, as this
|
|
will still cause the lock to be taken for each looped-back
|
|
datagram transmission. The net.inet.ip.mcast.loop sysctl may
|
|
be tuned to 0 to disable loopback by default; it defaults to 1
|
|
to preserve the existing behaviour.
|
|
|
|
For systems administrators, to obtain best performance with
|
|
multicast reception and multiple groups, it is always recommended
|
|
that a card with a suitably precise hash filter is used. Hash
|
|
collisions will still result in the lock being taken within the
|
|
transport protocol input path to check group membership.
|
|
|
|
If deploying FreeBSD in an environment with IGMP snooping switches,
|
|
it is recommended that the net.inet.igmp.sendlocal sysctl remain
|
|
enabled; this forces 224.0.0.0/24 group membership to be announced
|
|
via IGMP.
|
|
|
|
The size of 'struct igmpstat' has changed; netstat needs to be
|
|
recompiled to reflect this.
|
|
Bump __FreeBSD_version to 800070.
|
|
|
|
20090309:
|
|
libusb20.so.1 is now installed as libusb.so.1 and the ports system
|
|
updated to use it. This requires a buildworld/installworld in order to
|
|
update the library and dependencies (usbconfig, etc). Its advisable to
|
|
rebuild all ports which uses libusb. More specific directions are given
|
|
in the ports collection UPDATING file. Any /etc/libmap.conf entries for
|
|
libusb are no longer required and can be removed.
|
|
|
|
20090302:
|
|
A workaround is committed to allow the creation of System V shared
|
|
memory segment of size > 2 GB on the 64-bit architectures.
|
|
Due to a limitation of the existing ABI, the shm_segsz member
|
|
of the struct shmid_ds, returned by shmctl(IPC_STAT) call is
|
|
wrong for large segments. Note that limits must be explicitly
|
|
raised to allow such segments to be created.
|
|
|
|
20090301:
|
|
The layout of struct ifnet has changed, requiring a rebuild of all
|
|
network device driver modules.
|
|
|
|
20090227:
|
|
The /dev handling for the new USB stack has changed, a
|
|
buildworld/installworld is required for libusb20.
|
|
|
|
20090223:
|
|
The new USB2 stack has now been permanently moved in and all kernel and
|
|
module names reverted to their previous values (eg, usb, ehci, ohci,
|
|
ums, ...). The old usb stack can be compiled in by prefixing the name
|
|
with the letter 'o', the old usb modules have been removed.
|
|
Updating entry 20090216 for xorg and 20090215 for libmap may still
|
|
apply.
|
|
|
|
20090217:
|
|
The rc.conf(5) option if_up_delay has been renamed to
|
|
defaultroute_delay to better reflect its purpose. If you have
|
|
customized this setting in /etc/rc.conf you need to update it to
|
|
use the new name.
|
|
|
|
20090216:
|
|
xorg 7.4 wants to configure its input devices via hald which does not
|
|
yet work with USB2. If the keyboard/mouse does not work in xorg then
|
|
add
|
|
Option "AllowEmptyInput" "off"
|
|
to your ServerLayout section. This will cause X to use the configured
|
|
kbd and mouse sections from your xorg.conf.
|
|
|
|
20090215:
|
|
The GENERIC kernels for all architectures now default to the new USB2
|
|
stack. No kernel config options or code have been removed so if a
|
|
problem arises please report it and optionally revert to the old USB
|
|
stack. If you are loading USB kernel modules or have a custom kernel
|
|
that includes GENERIC then ensure that usb names are also changed over,
|
|
eg uftdi -> usb2_serial_ftdi.
|
|
|
|
Older programs linked against the ports libusb 0.1 need to be
|
|
redirected to the new stack's libusb20. /etc/libmap.conf can
|
|
be used for this:
|
|
# Map old usb library to new one for usb2 stack
|
|
libusb-0.1.so.8 libusb20.so.1
|
|
|
|
20090203:
|
|
The ichsmb(4) driver has been changed to require SMBus slave
|
|
addresses be left-justified (xxxxxxx0b) rather than right-justified.
|
|
All of the other SMBus controller drivers require left-justified
|
|
slave addresses, so this change makes all the drivers provide the
|
|
same interface.
|
|
|
|
20090201:
|
|
INET6 statistics (struct ip6stat) was updated.
|
|
netstat(1) needs to be recompiled.
|
|
|
|
20090119:
|
|
NTFS has been removed from GENERIC kernel on amd64 to match
|
|
GENERIC on i386. Should not cause any issues since mount_ntfs(8)
|
|
will load ntfs.ko module automatically when NTFS support is
|
|
actually needed, unless ntfs.ko is not installed or security
|
|
level prohibits loading kernel modules. If either is the case,
|
|
"options NTFS" has to be added into kernel config.
|
|
|
|
20090115:
|
|
TCP Appropriate Byte Counting (RFC 3465) support added to kernel.
|
|
New field in struct tcpcb breaks ABI, so bump __FreeBSD_version to
|
|
800061. User space tools that rely on the size of struct tcpcb in
|
|
tcp_var.h (e.g. sockstat) need to be recompiled.
|
|
|
|
20081225:
|
|
ng_tty(4) module updated to match the new TTY subsystem.
|
|
Due to API change, user-level applications must be updated.
|
|
New API support added to mpd5 CVS and expected to be present
|
|
in next mpd5.3 release.
|
|
|
|
20081219:
|
|
With __FreeBSD_version 800060 the makefs tool is part of
|
|
the base system (it was a port).
|
|
|
|
20081216:
|
|
The afdata and ifnet locks have been changed from mutexes to
|
|
rwlocks, network modules will need to be re-compiled.
|
|
|
|
20081214:
|
|
__FreeBSD_version 800059 incorporates the new arp-v2 rewrite.
|
|
RTF_CLONING, RTF_LLINFO and RTF_WASCLONED flags are eliminated.
|
|
The new code reduced struct rtentry{} by 16 bytes on 32-bit
|
|
architecture and 40 bytes on 64-bit architecture. The userland
|
|
applications "arp" and "ndp" have been updated accordingly.
|
|
The output from "netstat -r" shows only routing entries and
|
|
none of the L2 information.
|
|
|
|
20081130:
|
|
__FreeBSD_version 800057 marks the switchover from the
|
|
binary ath hal to source code. Users must add the line:
|
|
|
|
options AH_SUPPORT_AR5416
|
|
|
|
to their kernel config files when specifying:
|
|
|
|
device ath_hal
|
|
|
|
The ath_hal module no longer exists; the code is now compiled
|
|
together with the driver in the ath module. It is now
|
|
possible to tailor chip support (i.e. reduce the set of chips
|
|
and thereby the code size); consult ath_hal(4) for details.
|
|
|
|
20081121:
|
|
__FreeBSD_version 800054 adds memory barriers to
|
|
<machine/atomic.h>, new interfaces to ifnet to facilitate
|
|
multiple hardware transmit queues for cards that support
|
|
them, and a lock-less ring-buffer implementation to
|
|
enable drivers to more efficiently manage queueing of
|
|
packets.
|
|
|
|
20081117:
|
|
A new version of ZFS (version 13) has been merged to -HEAD.
|
|
This version has zpool attribute "listsnapshots" off by
|
|
default, which means "zfs list" does not show snapshots,
|
|
and is the same as Solaris behavior.
|
|
|
|
20081028:
|
|
dummynet(4) ABI has changed. ipfw(8) needs to be recompiled.
|
|
|
|
20081009:
|
|
The uhci, ohci, ehci and slhci USB Host controller drivers have
|
|
been put into separate modules. If you load the usb module
|
|
separately through loader.conf you will need to load the
|
|
appropriate *hci module as well. E.g. for a UHCI-based USB 2.0
|
|
controller add the following to loader.conf:
|
|
|
|
uhci_load="YES"
|
|
ehci_load="YES"
|
|
|
|
20081009:
|
|
The ABI used by the PMC toolset has changed. Please keep
|
|
userland (libpmc(3)) and the kernel module (hwpmc(4)) in
|
|
sync.
|
|
|
|
20080820:
|
|
The TTY subsystem of the kernel has been replaced by a new
|
|
implementation, which provides better scalability and an
|
|
improved driver model. Most common drivers have been migrated to
|
|
the new TTY subsystem, while others have not. The following
|
|
drivers have not yet been ported to the new TTY layer:
|
|
|
|
PCI/ISA:
|
|
cy, digi, rc, rp, sio
|
|
|
|
USB:
|
|
ubser, ucycom
|
|
|
|
Line disciplines:
|
|
ng_h4, ng_tty, ppp, sl, snp
|
|
|
|
Adding these drivers to your kernel configuration file shall
|
|
cause compilation to fail.
|
|
|
|
20080818:
|
|
ntpd has been upgraded to 4.2.4p5.
|
|
|
|
20080801:
|
|
OpenSSH has been upgraded to 5.1p1.
|
|
|
|
For many years, FreeBSD's version of OpenSSH preferred DSA
|
|
over RSA for host and user authentication keys. With this
|
|
upgrade, we've switched to the vendor's default of RSA over
|
|
DSA. This may cause upgraded clients to warn about unknown
|
|
host keys even for previously known hosts. Users should
|
|
follow the usual procedure for verifying host keys before
|
|
accepting the RSA key.
|
|
|
|
This can be circumvented by setting the "HostKeyAlgorithms"
|
|
option to "ssh-dss,ssh-rsa" in ~/.ssh/config or on the ssh
|
|
command line.
|
|
|
|
Please note that the sequence of keys offered for
|
|
authentication has been changed as well. You may want to
|
|
specify IdentityFile in a different order to revert this
|
|
behavior.
|
|
|
|
20080713:
|
|
The sio(4) driver has been removed from the i386 and amd64
|
|
kernel configuration files. This means uart(4) is now the
|
|
default serial port driver on those platforms as well.
|
|
|
|
To prevent collisions with the sio(4) driver, the uart(4) driver
|
|
uses different names for its device nodes. This means the
|
|
onboard serial port will now most likely be called "ttyu0"
|
|
instead of "ttyd0". You may need to reconfigure applications to
|
|
use the new device names.
|
|
|
|
When using the serial port as a boot console, be sure to update
|
|
/boot/device.hints and /etc/ttys before booting the new kernel.
|
|
If you forget to do so, you can still manually specify the hints
|
|
at the loader prompt:
|
|
|
|
set hint.uart.0.at="isa"
|
|
set hint.uart.0.port="0x3F8"
|
|
set hint.uart.0.flags="0x10"
|
|
set hint.uart.0.irq="4"
|
|
boot -s
|
|
|
|
20080609:
|
|
The gpt(8) utility has been removed. Use gpart(8) to partition
|
|
disks instead.
|
|
|
|
20080603:
|
|
The version that Linuxulator emulates was changed from 2.4.2
|
|
to 2.6.16. If you experience any problems with Linux binaries
|
|
please try to set sysctl compat.linux.osrelease to 2.4.2 and
|
|
if it fixes the problem contact emulation mailing list.
|
|
|
|
20080525:
|
|
ISDN4BSD (I4B) was removed from the src tree. You may need to
|
|
update a your kernel configuration and remove relevant entries.
|
|
|
|
20080509:
|
|
I have checked in code to support multiple routing tables.
|
|
See the man pages setfib(1) and setfib(2).
|
|
This is a hopefully backwards compatible version,
|
|
but to make use of it you need to compile your kernel
|
|
with options ROUTETABLES=2 (or more up to 16).
|
|
|
|
20080420:
|
|
The 802.11 wireless support was redone to enable multi-bss
|
|
operation on devices that are capable. The underlying device
|
|
is no longer used directly but instead wlanX devices are
|
|
cloned with ifconfig. This requires changes to rc.conf files.
|
|
For example, change:
|
|
ifconfig_ath0="WPA DHCP"
|
|
to
|
|
wlans_ath0=wlan0
|
|
ifconfig_wlan0="WPA DHCP"
|
|
see rc.conf(5) for more details. In addition, mergemaster of
|
|
/etc/rc.d is highly recommended. Simultaneous update of userland
|
|
and kernel wouldn't hurt either.
|
|
|
|
As part of the multi-bss changes the wlan_scan_ap and wlan_scan_sta
|
|
modules were merged into the base wlan module. All references
|
|
to these modules (e.g. in kernel config files) must be removed.
|
|
|
|
20080408:
|
|
psm(4) has gained write(2) support in native operation level.
|
|
Arbitrary commands can be written to /dev/psm%d and status can
|
|
be read back from it. Therefore, an application is responsible
|
|
for status validation and error recovery. It is a no-op in
|
|
other operation levels.
|
|
|
|
20080312:
|
|
Support for KSE threading has been removed from the kernel. To
|
|
run legacy applications linked against KSE libmap.conf may
|
|
be used. The following libmap.conf may be used to ensure
|
|
compatibility with any prior release:
|
|
|
|
libpthread.so.1 libthr.so.1
|
|
libpthread.so.2 libthr.so.2
|
|
libkse.so.3 libthr.so.3
|
|
|
|
20080301:
|
|
The layout of struct vmspace has changed. This affects libkvm
|
|
and any executables that link against libkvm and use the
|
|
kvm_getprocs() function. In particular, but not exclusively,
|
|
it affects ps(1), fstat(1), pkill(1), systat(1), top(1) and w(1).
|
|
The effects are minimal, but it's advisable to upgrade world
|
|
nonetheless.
|
|
|
|
20080229:
|
|
The latest em driver no longer has support in it for the
|
|
82575 adapter, this is now moved to the igb driver. The
|
|
split was done to make new features that are incompatible
|
|
with older hardware easier to do.
|
|
|
|
20080220:
|
|
The new geom_lvm(4) geom class has been renamed to geom_linux_lvm(4),
|
|
likewise the kernel option is now GEOM_LINUX_LVM.
|
|
|
|
20080211:
|
|
The default NFS mount mode has changed from UDP to TCP for
|
|
increased reliability. If you rely on (insecurely) NFS
|
|
mounting across a firewall you may need to update your
|
|
firewall rules.
|
|
|
|
20080208:
|
|
Belatedly note the addition of m_collapse for compacting
|
|
mbuf chains.
|
|
|
|
20080126:
|
|
The fts(3) structures have been changed to use adequate
|
|
integer types for their members and so to be able to cope
|
|
with huge file trees. The old fts(3) ABI is preserved
|
|
through symbol versioning in libc, so third-party binaries
|
|
using fts(3) should still work, although they will not take
|
|
advantage of the extended types. At the same time, some
|
|
third-party software might fail to build after this change
|
|
due to unportable assumptions made in its source code about
|
|
fts(3) structure members. Such software should be fixed
|
|
by its vendor or, in the worst case, in the ports tree.
|
|
FreeBSD_version 800015 marks this change for the unlikely
|
|
case that a portable fix is impossible.
|
|
|
|
20080123:
|
|
To upgrade to -current after this date, you must be running
|
|
FreeBSD not older than 6.0-RELEASE. Upgrading to -current
|
|
from 5.x now requires a stop over at RELENG_6 or RELENG_7 systems.
|
|
|
|
20071128:
|
|
The ADAPTIVE_GIANT kernel option has been retired because its
|
|
functionality is the default now.
|
|
|
|
20071118:
|
|
The AT keyboard emulation of sunkbd(4) has been turned on
|
|
by default. In order to make the special symbols of the Sun
|
|
keyboards driven by sunkbd(4) work under X these now have
|
|
to be configured the same way as Sun USB keyboards driven
|
|
by ukbd(4) (which also does AT keyboard emulation), f.e.:
|
|
|
|
Option "XkbLayout" "us"
|
|
Option "XkbRules" "xorg"
|
|
Option "XkbSymbols" "pc(pc105)+sun_vndr/usb(sun_usb)+us"
|
|
|
|
20071024:
|
|
It has been decided that it is desirable to provide ABI
|
|
backwards compatibility to the FreeBSD 4/5/6 versions of the
|
|
PCIOCGETCONF, PCIOCREAD and PCIOCWRITE IOCTLs, which was
|
|
broken with the introduction of PCI domain support (see the
|
|
20070930 entry). Unfortunately, this required the ABI of
|
|
PCIOCGETCONF to be broken again in order to be able to
|
|
provide backwards compatibility to the old version of that
|
|
IOCTL. Thus consumers of PCIOCGETCONF have to be recompiled
|
|
again. As for prominent ports this affects neither pciutils
|
|
nor xorg-server this time, the hal port needs to be rebuilt
|
|
however.
|
|
|
|
20071020:
|
|
The misnamed kthread_create() and friends have been renamed
|
|
to kproc_create() etc. Many of the callers already
|
|
used kproc_start()..
|
|
I will return kthread_create() and friends in a while
|
|
with implementations that actually create threads, not procs.
|
|
Renaming corresponds with version 800002.
|
|
|
|
20071010:
|
|
RELENG_7 branched.
|
|
|
|
20071009:
|
|
Setting WITHOUT_LIBPTHREAD now means WITHOUT_LIBKSE and
|
|
WITHOUT_LIBTHR are set.
|
|
|
|
20070930:
|
|
The PCI code has been made aware of PCI domains. This means that
|
|
the location strings as used by pciconf(8) etc are now in the
|
|
following format: pci<domain>:<bus>:<device>[:<function>]. It
|
|
also means that consumers of <sys/pciio.h> potentially need to
|
|
be recompiled; this includes the hal and xorg-server ports.
|
|
|
|
20070928:
|
|
The caching daemon (cached) was renamed to nscd. nscd.conf
|
|
configuration file should be used instead of cached.conf and
|
|
nscd_enable, nscd_pidfile and nscd_flags options should be used
|
|
instead of cached_enable, cached_pidfile and cached_flags in
|
|
rc.conf.
|
|
|
|
20070921:
|
|
The getfacl(1) utility now prints owning user and group name
|
|
instead of owning uid and gid in the three line comment header.
|
|
This is the same behavior as getfacl(1) on Solaris and Linux.
|
|
|
|
20070704:
|
|
The new IPsec code is now compiled in using the IPSEC option. The
|
|
IPSEC option now requires "device crypto" be defined in your kernel
|
|
configuration. The FAST_IPSEC kernel option is now deprecated.
|
|
|
|
20070702:
|
|
The packet filter (pf) code has been updated to OpenBSD 4.1 Please
|
|
note the changed syntax - keep state is now on by default. Also
|
|
note the fact that ftp-proxy(8) has been changed from bottom up and
|
|
has been moved from libexec to usr/sbin. Changes in the ALTQ
|
|
handling also affect users of IPFW's ALTQ capabilities.
|
|
|
|
20070701:
|
|
Remove KAME IPsec in favor of FAST_IPSEC, which is now the
|
|
only IPsec supported by FreeBSD. The new IPsec stack
|
|
supports both IPv4 and IPv6. The kernel option will change
|
|
after the code changes have settled in. For now the kernel
|
|
option IPSEC is deprecated and FAST_IPSEC is the only option, that
|
|
will change after some settling time.
|
|
|
|
20070701:
|
|
The wicontrol(8) utility has been removed from the base system. wi(4)
|
|
cards should be configured using ifconfig(8), see the man page for more
|
|
information.
|
|
|
|
20070612:
|
|
The i386/amd64 GENERIC kernel now defaults to the nfe(4) driver
|
|
instead of the nve(4) driver. Please update your configuration
|
|
accordingly.
|
|
|
|
20070612:
|
|
By default, /etc/rc.d/sendmail no longer rebuilds the aliases
|
|
database if it is missing or older than the aliases file. If
|
|
desired, set the new rc.conf option sendmail_rebuild_aliases
|
|
to "YES" to restore that functionality.
|
|
|
|
20070612:
|
|
The IPv4 multicast socket code has been considerably modified, and
|
|
moved to the file sys/netinet/in_mcast.c. Initial support for the
|
|
RFC 3678 Source-Specific Multicast Socket API has been added to
|
|
the IPv4 network stack.
|
|
|
|
Strict multicast and broadcast reception is now the default for
|
|
UDP/IPv4 sockets; the net.inet.udp.strict_mcast_mship sysctl variable
|
|
has now been removed.
|
|
|
|
The RFC 1724 hack for interface selection has been removed; the use
|
|
of the Linux-derived ip_mreqn structure with IP_MULTICAST_IF has
|
|
been added to replace it. Consumers such as routed will soon be
|
|
updated to reflect this.
|
|
|
|
These changes affect users who are running routed(8) or rdisc(8)
|
|
from the FreeBSD base system on point-to-point or unnumbered
|
|
interfaces.
|
|
|
|
20070610:
|
|
The net80211 layer has changed significantly and all wireless
|
|
drivers that depend on it need to be recompiled. Further these
|
|
changes require that any program that interacts with the wireless
|
|
support in the kernel be recompiled; this includes: ifconfig,
|
|
wpa_supplicant, hostapd, and wlanstats. Users must also, for
|
|
the moment, kldload the wlan_scan_sta and/or wlan_scan_ap modules
|
|
if they use modules for wireless support. These modules implement
|
|
scanning support for station and ap modes, respectively. Failure
|
|
to load the appropriate module before marking a wireless interface
|
|
up will result in a message to the console and the device not
|
|
operating properly.
|
|
|
|
20070610:
|
|
The pam_nologin(8) module ceases to provide an authentication
|
|
function and starts providing an account management function.
|
|
Consequent changes to /etc/pam.d should be brought in using
|
|
mergemaster(8). Third-party files in /usr/local/etc/pam.d may
|
|
need manual editing as follows. Locate this line (or similar):
|
|
|
|
auth required pam_nologin.so no_warn
|
|
|
|
and change it according to this example:
|
|
|
|
account required pam_nologin.so no_warn
|
|
|
|
That is, the first word needs to be changed from "auth" to
|
|
"account". The new line can be moved to the account section
|
|
within the file for clarity. Not updating pam.conf(5) files
|
|
will result in nologin(5) ignored by the respective services.
|
|
|
|
20070529:
|
|
The ether_ioctl() function has been synchronized with ioctl(2)
|
|
and ifnet.if_ioctl. Due to that, the size of one of its arguments
|
|
has changed on 64-bit architectures. All kernel modules using
|
|
ether_ioctl() need to be rebuilt on such architectures.
|
|
|
|
20070516:
|
|
Improved INCLUDE_CONFIG_FILE support has been introduced to the
|
|
config(8) utility. In order to take advantage of this new
|
|
functionality, you are expected to recompile and install
|
|
src/usr.sbin/config. If you don't rebuild config(8), and your
|
|
kernel configuration depends on INCLUDE_CONFIG_FILE, the kernel
|
|
build will be broken because of a missing "kernconfstring"
|
|
symbol.
|
|
|
|
20070513:
|
|
Symbol versioning is enabled by default. To disable it, use
|
|
option WITHOUT_SYMVER. It is not advisable to attempt to
|
|
disable symbol versioning once it is enabled; your installworld
|
|
will break because a symbol version-less libc will get installed
|
|
before the install tools. As a result, the old install tools,
|
|
which previously had symbol dependencies to FBSD_1.0, will fail
|
|
because the freshly installed libc will not have them.
|
|
|
|
The default threading library (providing "libpthread") has been
|
|
changed to libthr. If you wish to have libkse as your default,
|
|
use option DEFAULT_THREAD_LIB=libkse for the buildworld.
|
|
|
|
20070423:
|
|
The ABI breakage in sendmail(8)'s libmilter has been repaired
|
|
so it is no longer necessary to recompile mail filters (aka,
|
|
milters). If you recompiled mail filters after the 20070408
|
|
note, it is not necessary to recompile them again.
|
|
|
|
20070417:
|
|
The new trunk(4) driver has been renamed to lagg(4) as it better
|
|
reflects its purpose. ifconfig will need to be recompiled.
|
|
|
|
20070408:
|
|
sendmail(8) has been updated to version 8.14.1. Mail filters
|
|
(aka, milters) compiled against the libmilter included in the
|
|
base operating system should be recompiled.
|
|
|
|
20070302:
|
|
Firmwares for ipw(4) and iwi(4) are now included in the base tree.
|
|
In order to use them one must agree to the respective LICENSE in
|
|
share/doc/legal and define legal.intel_<name>.license_ack=1 via
|
|
loader.conf(5) or kenv(1). Make sure to deinstall the now
|
|
deprecated modules from the respective firmware ports.
|
|
|
|
20070228:
|
|
The name resolution/mapping functions addr2ascii(3) and ascii2addr(3)
|
|
were removed from FreeBSD's libc. These originally came from INRIA
|
|
IPv6. Nothing in FreeBSD ever used them. They may be regarded as
|
|
deprecated in previous releases.
|
|
The AF_LINK support for getnameinfo(3) was merged from NetBSD to
|
|
replace it as a more portable (and re-entrant) API.
|
|
|
|
20070224:
|
|
To support interrupt filtering a modification to the newbus API
|
|
has occurred, ABI was broken and __FreeBSD_version was bumped
|
|
to 700031. Please make sure that your kernel and modules are in
|
|
sync. For more info:
|
|
http://docs.freebsd.org/cgi/mid.cgi?20070221233124.GA13941
|
|
|
|
20070224:
|
|
The IPv6 multicast forwarding code may now be loaded into GENERIC
|
|
kernels by loading the ip_mroute.ko module. This is built into the
|
|
module unless WITHOUT_INET6 or WITHOUT_INET6_SUPPORT options are
|
|
set; see src.conf(5) for more information.
|
|
|
|
20070214:
|
|
The output of netstat -r has changed. Without -n, we now only
|
|
print a "network name" without the prefix length if the network
|
|
address and mask exactly match a Class A/B/C network, and an entry
|
|
exists in the nsswitch "networks" map.
|
|
With -n, we print the full unabbreviated CIDR network prefix in
|
|
the form "a.b.c.d/p". 0.0.0.0/0 is always printed as "default".
|
|
This change is in preparation for changes such as equal-cost
|
|
multipath, and to more generally assist operational deployment
|
|
of FreeBSD as a modern IPv4 router.
|
|
|
|
20070210:
|
|
PIM has been turned on by default in the IPv4 multicast
|
|
routing code. The kernel option 'PIM' has now been removed.
|
|
PIM is now built by default if option 'MROUTING' is specified.
|
|
It may now be loaded into GENERIC kernels by loading the
|
|
ip_mroute.ko module.
|
|
|
|
20070207:
|
|
Support for IPIP tunnels (VIFF_TUNNEL) in IPv4 multicast routing
|
|
has been removed. Its functionality may be achieved by explicitly
|
|
configuring gif(4) interfaces and using the 'phyint' keyword in
|
|
mrouted.conf.
|
|
XORP does not support source-routed IPv4 multicast tunnels nor the
|
|
integrated IPIP tunneling, therefore it is not affected by this
|
|
change. The __FreeBSD_version macro has been bumped to 700030.
|
|
|
|
20061221:
|
|
Support for PCI Message Signalled Interrupts has been
|
|
re-enabled in the bge driver, only for those chips which are
|
|
believed to support it properly. If there are any problems,
|
|
MSI can be disabled completely by setting the
|
|
'hw.pci.enable_msi' and 'hw.pci.enable_msix' tunables to 0
|
|
in the loader.
|
|
|
|
20061214:
|
|
Support for PCI Message Signalled Interrupts has been
|
|
disabled again in the bge driver. Many revisions of the
|
|
hardware fail to support it properly. Support can be
|
|
re-enabled by removing the #define of BGE_DISABLE_MSI in
|
|
"src/sys/dev/bge/if_bge.c".
|
|
|
|
20061214:
|
|
Support for PCI Message Signalled Interrupts has been added
|
|
to the bge driver. If there are any problems, MSI can be
|
|
disabled completely by setting the 'hw.pci.enable_msi' and
|
|
'hw.pci.enable_msix' tunables to 0 in the loader.
|
|
|
|
20061205:
|
|
The removal of several facets of the experimental Threading
|
|
system from the kernel means that the proc and thread structures
|
|
have changed quite a bit. I suggest all kernel modules that might
|
|
reference these structures be recompiled.. Especially the
|
|
linux module.
|
|
|
|
20061126:
|
|
Sound infrastructure has been updated with various fixes and
|
|
improvements. Most of the changes are pretty much transparent,
|
|
with exceptions of followings:
|
|
1) All sound driver specific sysctls (hw.snd.pcm%d.*) have been
|
|
moved to their own dev sysctl nodes, for example:
|
|
hw.snd.pcm0.vchans -> dev.pcm.0.vchans
|
|
2) /dev/dspr%d.%d has been deprecated. Each channel now has its
|
|
own chardev in the form of "dsp%d.<function>%d", where <function>
|
|
is p = playback, r = record and v = virtual, respectively. Users
|
|
are encouraged to use these devs instead of (old) "/dev/dsp%d.%d".
|
|
This does not affect those who are using "/dev/dsp".
|
|
|
|
20061122:
|
|
geom(4)'s gmirror(8) class metadata structure has been
|
|
rev'd from v3 to v4. If you update across this point and
|
|
your metadata is converted for you, you will not be easily
|
|
able to downgrade since the /boot/kernel.old/geom_mirror.ko
|
|
kernel module will be unable to read the v4 metadata. You
|
|
can resolve this by doing from the loader(8) prompt:
|
|
|
|
set vfs.root.mountfrom="ufs:/dev/XXX"
|
|
|
|
where XXX is the root slice of one of the disks that composed
|
|
the mirror (i.e.: /dev/ad0s1a). You can then rebuild
|
|
the array the same way you built it originally.
|
|
|
|
20061122:
|
|
The following binaries have been disconnected from the build:
|
|
mount_devfs, mount_ext2fs, mount_fdescfs, mount_procfs, mount_linprocfs,
|
|
and mount_std. The functionality of these programs has been
|
|
moved into the mount program. For example, to mount a devfs
|
|
filesystem, instead of using mount_devfs, use: "mount -t devfs".
|
|
This does not affect entries in /etc/fstab, since entries in
|
|
/etc/fstab are always processed with "mount -t fstype".
|
|
|
|
20061113:
|
|
Support for PCI Message Signalled Interrupts on i386 and amd64
|
|
has been added to the kernel and various drivers will soon be
|
|
updated to use MSI when it is available. If there are any problems,
|
|
MSI can be disabled completely by setting the 'hw.pci.enable_msi'
|
|
and 'hw.pci.enable_msix' tunables to 0 in the loader.
|
|
|
|
20061110:
|
|
The MUTEX_PROFILING option has been renamed to LOCK_PROFILING.
|
|
The lockmgr object layout has been changed as a result of having
|
|
a lock_object embedded in it. As a consequence all file system
|
|
kernel modules must be re-compiled. The mutex profiling man page
|
|
has not yet been updated to reflect this change.
|
|
|
|
20061026:
|
|
KSE in the kernel has now been made optional and turned on by
|
|
default. Use 'nooption KSE' in your kernel config to turn it
|
|
off. All kernel modules *must* be recompiled after this change.
|
|
There-after, modules from a KSE kernel should be compatible with
|
|
modules from a NOKSE kernel due to the temporary padding fields
|
|
added to 'struct proc'.
|
|
|
|
20060929:
|
|
mrouted and its utilities have been removed from the base system.
|
|
|
|
20060927:
|
|
Some ioctl(2) command codes have changed. Full backward ABI
|
|
compatibility is provided if the "options COMPAT_FREEBSD6" is
|
|
present in the kernel configuration file. Make sure to add
|
|
this option to your kernel config file, or recompile X.Org
|
|
and the rest of ports; otherwise they may refuse to work.
|
|
|
|
20060924:
|
|
tcpslice has been removed from the base system.
|
|
|
|
20060913:
|
|
The sizes of struct tcpcb (and struct xtcpcb) have changed due to
|
|
the rewrite of TCP syncookies. Tools like netstat, sockstat, and
|
|
systat needs to be rebuilt.
|
|
|
|
20060903:
|
|
libpcap updated to v0.9.4 and tcpdump to v3.9.4
|
|
|
|
20060816:
|
|
The IPFIREWALL_FORWARD_EXTENDED option is gone and the behaviour
|
|
for IPFIREWALL_FORWARD is now as it was before when it was first
|
|
committed and for years after. The behaviour is now ON.
|
|
|
|
20060725:
|
|
enigma(1)/crypt(1) utility has been changed on 64 bit architectures.
|
|
Now it can decrypt files created from different architectures.
|
|
Unfortunately, it is no longer able to decrypt a cipher text
|
|
generated with an older version on 64 bit architectures.
|
|
If you have such a file, you need old utility to decrypt it.
|
|
|
|
20060709:
|
|
The interface version of the i4b kernel part has changed. So
|
|
after updating the kernel sources and compiling a new kernel,
|
|
the i4b user space tools in "/usr/src/usr.sbin/i4b" must also
|
|
be rebuilt, and vice versa.
|
|
|
|
20060627:
|
|
The XBOX kernel now defaults to the nfe(4) driver instead of
|
|
the nve(4) driver. Please update your configuration
|
|
accordingly.
|
|
|
|
20060514:
|
|
The i386-only lnc(4) driver for the AMD Am7900 LANCE and Am79C9xx
|
|
PCnet family of NICs has been removed. The new le(4) driver serves
|
|
as an equivalent but cross-platform replacement with the pcn(4)
|
|
driver still providing performance-optimized support for the subset
|
|
of AMD Am79C971 PCnet-FAST and greater chips as before.
|
|
|
|
20060511:
|
|
The machdep.* sysctls and the adjkerntz utility have been
|
|
modified a bit. The new adjkerntz utility uses the new
|
|
sysctl names and sysctlbyname() calls, so it may be impossible
|
|
to run an old /sbin/adjkerntz utility in single-user mode
|
|
with a new kernel. Replace the `adjkerntz -i' step before
|
|
`make installworld' with:
|
|
|
|
/usr/obj/usr/src/sbin/adjkerntz/adjkerntz -i
|
|
|
|
and proceed as usual with the rest of the installworld-stage
|
|
steps. Otherwise, you risk installing binaries with their
|
|
timestamp set several hours in the future, especially if
|
|
you are running with local time set to GMT+X hours.
|
|
|
|
20060412:
|
|
The ip6fw utility has been removed. The behavior provided by
|
|
ip6fw has been in ipfw2 for a good while and the rc.d scripts
|
|
have been updated to deal with it. There are some rules that
|
|
might not migrate cleanly. Use rc.firewall6 as a template to
|
|
rewrite rules.
|
|
|
|
20060428:
|
|
The puc(4) driver has been overhauled. The ebus(4) and sbus(4)
|
|
attachments have been removed. Make sure to configure scc(4)
|
|
on sparc64. Note also that by default puc(4) will use uart(4)
|
|
and not sio(4) for serial ports because interrupt handling has
|
|
been optimized for multi-port serial cards and only uart(4)
|
|
implements the interface to support it.
|
|
|
|
20060330:
|
|
The scc(4) driver replaces puc(4) for Serial Communications
|
|
Controllers (SCCs) like the Siemens SAB82532 and the Zilog
|
|
Z8530. On sparc64, it is advised to add scc(4) to the kernel
|
|
configuration to make sure that the serial ports remain
|
|
functional.
|
|
|
|
20060317:
|
|
Most world/kernel related NO_* build options changed names.
|
|
New knobs have common prefixes WITHOUT_*/WITH_* (modelled
|
|
after FreeBSD ports) and should be set in /etc/src.conf
|
|
(the src.conf(5) manpage is provided). Full backwards
|
|
compatibility is maintained for the time being though it's
|
|
highly recommended to start moving old options out of the
|
|
system-wide /etc/make.conf file into the new /etc/src.conf
|
|
while also properly renaming them. More conversions will
|
|
likely follow. Posting to current@:
|
|
|
|
http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html
|
|
|
|
20060305:
|
|
The NETSMBCRYPTO kernel option has been retired because its
|
|
functionality is always included in NETSMB and smbfs.ko now.
|
|
|
|
20060303:
|
|
The TDFX_LINUX kernel option was retired and replaced by the
|
|
tdfx_linux device. The latter can be loaded as the 3dfx_linux.ko
|
|
kernel module. Loading it alone should suffice to get 3dfx support
|
|
for Linux apps because it will pull in 3dfx.ko and linux.ko through
|
|
its dependencies.
|
|
|
|
20060204:
|
|
The 'audit' group was added to support the new auditing functionality
|
|
in the base system. Be sure to follow the directions for updating,
|
|
including the requirement to run mergemaster -p.
|
|
|
|
20060201:
|
|
The kernel ABI to file system modules was changed on i386.
|
|
Please make sure that your kernel and modules are in sync.
|
|
|
|
20060118:
|
|
This actually occured some time ago, but installing the kernel
|
|
now also installs a bunch of symbol files for the kernel modules.
|
|
This increases the size of /boot/kernel to about 67Mbytes. You
|
|
will need twice this if you will eventually back this up to kernel.old
|
|
on your next install.
|
|
If you have a shortage of room in your root partition, you should add
|
|
-DINSTALL_NODEBUG to your make arguments or add INSTALL_NODEBUG="yes"
|
|
to your /etc/make.conf.
|
|
|
|
20060113:
|
|
libc's malloc implementation has been replaced. This change has the
|
|
potential to uncover application bugs that previously went unnoticed.
|
|
See the malloc(3) manual page for more details.
|
|
|
|
20060112:
|
|
The generic netgraph(4) cookie has been changed. If you upgrade
|
|
kernel passing this point, you also need to upgrade userland
|
|
and netgraph(4) utilities like ports/net/mpd or ports/net/mpd4.
|
|
|
|
20060106:
|
|
si(4)'s device files now contain the unit number.
|
|
Uses of {cua,tty}A[0-9a-f] should be replaced by {cua,tty}A0[0-9a-f].
|
|
|
|
20060106:
|
|
The kernel ABI was mostly destroyed due to a change in the size
|
|
of struct lock_object which is nested in other structures such
|
|
as mutexes which are nested in all sorts of other structures.
|
|
Make sure your kernel and modules are in sync.
|
|
|
|
20051231:
|
|
The page coloring algorithm in the VM subsystem was converted
|
|
from tuning with kernel options to autotuning. Please remove
|
|
any PQ_* option except PQ_NOOPT from your kernel config.
|
|
|
|
20051211:
|
|
The net80211-related tools in the tools/tools/ath directory
|
|
have been moved to tools/tools/net80211 and renamed with a
|
|
"wlan" prefix. Scripts that use them should be adjusted
|
|
accordingly.
|
|
|
|
20051202:
|
|
Scripts in the local_startup directories (as defined in
|
|
/etc/defaults/rc.conf) that have the new rc.d semantics will
|
|
now be run as part of the base system rcorder. If there are
|
|
errors or problems with one of these local scripts, it could
|
|
cause boot problems. If you encounter such problems, boot in
|
|
single user mode, remove that script from the */rc.d directory.
|
|
Please report the problem to the port's maintainer, and the
|
|
freebsd-ports@freebsd.org mailing list.
|
|
|
|
20051129:
|
|
The nodev mount option was deprecated in RELENG_6 (where it
|
|
was a no-op), and is now unsupported. If you have nodev or dev listed
|
|
in /etc/fstab, remove it, otherwise it will result in a mount error.
|
|
|
|
20051129:
|
|
ABI between ipfw(4) and ipfw(8) has been changed. You need
|
|
to rebuild ipfw(8) when rebuilding kernel.
|
|
|
|
20051108:
|
|
rp(4)'s device files now contain the unit number.
|
|
Uses of {cua,tty}R[0-9a-f] should be replaced by {cua,tty}R0[0-9a-f].
|
|
|
|
20051029:
|
|
/etc/rc.d/ppp-user has been renamed to /etc/rc.d/ppp.
|
|
Its /etc/rc.conf.d configuration file has been `ppp' from
|
|
the beginning, and hence there is no need to touch it.
|
|
|
|
20051014:
|
|
Now most modules get their build-time options from the kernel
|
|
configuration file. A few modules still have fixed options
|
|
due to their non-conformant implementation, but they will be
|
|
corrected eventually. You may need to review the options of
|
|
the modules in use, explicitly specify the non-default options
|
|
in the kernel configuration file, and rebuild the kernel and
|
|
modules afterwards.
|
|
|
|
20051001:
|
|
kern.polling.enable sysctl MIB is now deprecated. Use ifconfig(8)
|
|
to turn polling(4) on your interfaces.
|
|
|
|
20050927:
|
|
The old bridge(4) implementation was retired. The new
|
|
if_bridge(4) serves as a full functional replacement.
|
|
|
|
20050722:
|
|
The ai_addrlen of a struct addrinfo was changed to a socklen_t
|
|
to conform to POSIX-2001. This change broke an ABI
|
|
compatibility on 64 bit architecture. You have to recompile
|
|
userland programs that use getaddrinfo(3) on 64 bit
|
|
architecture.
|
|
|
|
20050711:
|
|
RELENG_6 branched here.
|
|
|
|
20050629:
|
|
The pccard_ifconfig rc.conf variable has been removed and a new
|
|
variable, ifconfig_DEFAULT has been introduced. Unlike
|
|
pccard_ifconfig, ifconfig_DEFAULT applies to ALL interfaces that
|
|
do not have ifconfig_ifn entries rather than just those in
|
|
removable_interfaces.
|
|
|
|
20050616:
|
|
Some previous versions of PAM have permitted the use of
|
|
non-absolute paths in /etc/pam.conf or /etc/pam.d/* when referring
|
|
to third party PAM modules in /usr/local/lib. A change has been
|
|
made to require the use of absolute paths in order to avoid
|
|
ambiguity and dependence on library path configuration, which may
|
|
affect existing configurations.
|
|
|
|
20050610:
|
|
Major changes to network interface API. All drivers must be
|
|
recompiled. Drivers not in the base system will need to be
|
|
updated to the new APIs.
|
|
|
|
20050609:
|
|
Changes were made to kinfo_proc in sys/user.h. Please recompile
|
|
userland, or commands like `fstat', `pkill', `ps', `top' and `w'
|
|
will not behave correctly.
|
|
|
|
The API and ABI for hwpmc(4) have changed with the addition
|
|
of sampling support. Please recompile lib/libpmc(3) and
|
|
usr.sbin/{pmcstat,pmccontrol}.
|
|
|
|
20050606:
|
|
The OpenBSD dhclient was imported in place of the ISC dhclient
|
|
and the network interface configuration scripts were updated
|
|
accordingly. If you use DHCP to configure your interfaces, you
|
|
must now run devd. Also, DNS updating was lost so you will need
|
|
to find a workaround if you use this feature.
|
|
|
|
The '_dhcp' user was added to support the OpenBSD dhclient. Be
|
|
sure to run mergemaster -p (like you are supposed to do every time
|
|
anyway).
|
|
|
|
20050605:
|
|
if_bridge was added to the tree. This has changed struct ifnet.
|
|
Please recompile userland and all network related modules.
|
|
|
|
20050603:
|
|
The n_net of a struct netent was changed to an uint32_t, and
|
|
1st argument of getnetbyaddr() was changed to an uint32_t, to
|
|
conform to POSIX-2001. These changes broke an ABI
|
|
compatibility on 64 bit architecture. With these changes,
|
|
shlib major of libpcap was bumped. You have to recompile
|
|
userland programs that use getnetbyaddr(3), getnetbyname(3),
|
|
getnetent(3) and/or libpcap on 64 bit architecture.
|
|
|
|
20050528:
|
|
Kernel parsing of extra options on '#!' first lines of shell
|
|
scripts has changed. Lines with multiple options likely will
|
|
fail after this date. For full details, please see
|
|
http://people.freebsd.org/~gad/Updating-20050528.txt
|
|
|
|
20050503:
|
|
The packet filter (pf) code has been updated to OpenBSD 3.7
|
|
Please note the changed anchor syntax and the fact that
|
|
authpf(8) now needs a mounted fdescfs(5) to function.
|
|
|
|
20050415:
|
|
The NO_MIXED_MODE kernel option has been removed from the i386
|
|
amd64 platforms as its use has been superceded by the new local
|
|
APIC timer code. Any kernel config files containing this option
|
|
should be updated.
|
|
|
|
20050227:
|
|
The on-disk format of LC_CTYPE files was changed to be machine
|
|
independent. Please make sure NOT to use NO_CLEAN buildworld
|
|
when crossing this point. Crossing this point also requires
|
|
recompile or reinstall of all locale depended packages.
|
|
|
|
20050225:
|
|
The ifi_epoch member of struct if_data has been changed to
|
|
contain the uptime at which the interface was created or the
|
|
statistics zeroed rather then the wall clock time because
|
|
wallclock time may go backwards. This should have no impact
|
|
unless an snmp implementation is using this value (I know of
|
|
none at this point.)
|
|
|
|
20050224:
|
|
The acpi_perf and acpi_throttle drivers are now part of the
|
|
acpi(4) main module. They are no longer built separately.
|
|
|
|
20050223:
|
|
The layout of struct image_params has changed. You have to
|
|
recompile all compatibility modules (linux, svr4, etc) for use
|
|
with the new kernel.
|
|
|
|
20050223:
|
|
The p4tcc driver has been merged into cpufreq(4). This makes
|
|
"options CPU_ENABLE_TCC" obsolete. Please load cpufreq.ko or
|
|
compile in "device cpufreq" to restore this functionality.
|
|
|
|
20050220:
|
|
The responsibility of recomputing the file system summary of
|
|
a SoftUpdates-enabled dirty volume has been transferred to the
|
|
background fsck. A rebuild of fsck(8) utility is recommended
|
|
if you have updated the kernel.
|
|
|
|
To get the old behavior (recompute file system summary at mount
|
|
time), you can set vfs.ffs.compute_summary_at_mount=1 before
|
|
mounting the new volume.
|
|
|
|
20050206:
|
|
The cpufreq import is complete. As part of this, the sysctls for
|
|
acpi(4) throttling have been removed. The power_profile script
|
|
has been updated, so you can use performance/economy_cpu_freq in
|
|
rc.conf(5) to set AC on/offline cpu frequencies.
|
|
|
|
20050206:
|
|
NG_VERSION has been increased. Recompiling kernel (or ng_socket.ko)
|
|
requires recompiling libnetgraph and userland netgraph utilities.
|
|
|
|
20050114:
|
|
Support for abbreviated forms of a number of ipfw options is
|
|
now deprecated. Warnings are printed to stderr indicating the
|
|
correct full form when a match occurs. Some abbreviations may
|
|
be supported at a later date based on user feedback. To be
|
|
considered for support, abbreviations must be in use prior to
|
|
this commit and unlikely to be confused with current key words.
|
|
|
|
20041221:
|
|
By a popular demand, a lot of NOFOO options were renamed
|
|
to NO_FOO (see bsd.compat.mk for a full list). The old
|
|
spellings are still supported, but will cause annoying
|
|
warnings on stderr. Make sure you upgrade properly (see
|
|
the COMMON ITEMS: section later in this file).
|
|
|
|
20041219:
|
|
Auto-loading of ancillary wlan modules such as wlan_wep has
|
|
been temporarily disabled; you need to statically configure
|
|
the modules you need into your kernel or explicitly load them
|
|
prior to use. Specifically, if you intend to use WEP encryption
|
|
with an 802.11 device load/configure wlan_wep; if you want to
|
|
use WPA with the ath driver load/configure wlan_tkip, wlan_ccmp,
|
|
and wlan_xauth as required.
|
|
|
|
20041213:
|
|
The behaviour of ppp(8) has changed slightly. If lqr is enabled
|
|
(``enable lqr''), older versions would revert to LCP ECHO mode on
|
|
negotiation failure. Now, ``enable echo'' is required for this
|
|
behaviour. The ppp version number has been bumped to 3.4.2 to
|
|
reflect the change.
|
|
|
|
20041201:
|
|
The wlan support has been updated to split the crypto support
|
|
into separate modules. For static WEP you must configure the
|
|
wlan_wep module in your system or build and install the module
|
|
in place where it can be loaded (the kernel will auto-load
|
|
the module when a wep key is configured).
|
|
|
|
20041201:
|
|
The ath driver has been updated to split the tx rate control
|
|
algorithm into a separate module. You need to include either
|
|
ath_rate_onoe or ath_rate_amrr when configuring the kernel.
|
|
|
|
20041116:
|
|
Support for systems with an 80386 CPU has been removed. Please
|
|
use FreeBSD 5.x or earlier on systems with an 80386.
|
|
|
|
20041110:
|
|
We have had a hack which would mount the root filesystem
|
|
R/W if the device were named 'md*'. As part of the vnode
|
|
work I'm doing I have had to remove this hack. People
|
|
building systems which use preloaded MD root filesystems
|
|
may need to insert a "/sbin/mount -u -o rw /dev/md0 /" in
|
|
their /etc/rc scripts.
|
|
|
|
20041104:
|
|
FreeBSD 5.3 shipped here.
|
|
|
|
20041102:
|
|
The size of struct tcpcb has changed again due to the removal
|
|
of RFC1644 T/TCP. You have to recompile userland programs that
|
|
read kmem for tcp sockets directly (netstat, sockstat, etc.)
|
|
|
|
20041022:
|
|
The size of struct tcpcb has changed. You have to recompile
|
|
userland programs that read kmem for tcp sockets directly
|
|
(netstat, sockstat, etc.)
|
|
|
|
20041016:
|
|
RELENG_5 branched here. For older entries, please see updating
|
|
in the RELENG_5 branch.
|
|
|
|
COMMON ITEMS:
|
|
|
|
General Notes
|
|
-------------
|
|
Avoid using make -j when upgrading. From time to time in the
|
|
past there have been problems using -j with buildworld and/or
|
|
installworld. This is especially true when upgrading between
|
|
"distant" versions (eg one that cross a major release boundary
|
|
or several minor releases, or when several months have passed
|
|
on the -current branch).
|
|
|
|
Sometimes, obscure build problems are the result of environment
|
|
poisoning. This can happen because the make utility reads its
|
|
environment when searching for values for global variables.
|
|
To run your build attempts in an "environmental clean room",
|
|
prefix all make commands with 'env -i '. See the env(1) manual
|
|
page for more details.
|
|
|
|
When upgrading from one major version to another it is generally
|
|
best to upgrade to the latest code in the currently installed branch
|
|
first, then do an upgrade to the new branch. This is the best-tested
|
|
upgrade path, and has the highest probability of being successful.
|
|
Please try this approach before reporting problems with a major
|
|
version upgrade.
|
|
|
|
To build a kernel
|
|
-----------------
|
|
If you are updating from a prior version of FreeBSD (even one just
|
|
a few days old), you should follow this procedure. It is the most
|
|
failsafe as it uses a /usr/obj tree with a fresh mini-buildworld,
|
|
|
|
make kernel-toolchain
|
|
make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE
|
|
make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE
|
|
|
|
To test a kernel once
|
|
---------------------
|
|
If you just want to boot a kernel once (because you are not sure
|
|
if it works, or if you want to boot a known bad kernel to provide
|
|
debugging information) run
|
|
make installkernel KERNCONF=YOUR_KERNEL_HERE KODIR=/boot/testkernel
|
|
nextboot -k testkernel
|
|
|
|
To just build a kernel when you know that it won't mess you up
|
|
--------------------------------------------------------------
|
|
This assumes you are already running a 5.X system. Replace
|
|
${arch} with the architecture of your machine (e.g. "i386",
|
|
"alpha", "amd64", "ia64", "pc98", "sparc64", etc).
|
|
|
|
cd src/sys/${arch}/conf
|
|
config KERNEL_NAME_HERE
|
|
cd ../compile/KERNEL_NAME_HERE
|
|
make depend
|
|
make
|
|
make install
|
|
|
|
If this fails, go to the "To build a kernel" section.
|
|
|
|
To rebuild everything and install it on the current system.
|
|
-----------------------------------------------------------
|
|
# Note: sometimes if you are running current you gotta do more than
|
|
# is listed here if you are upgrading from a really old current.
|
|
|
|
<make sure you have good level 0 dumps>
|
|
make buildworld
|
|
make kernel KERNCONF=YOUR_KERNEL_HERE
|
|
[1]
|
|
<reboot in single user> [3]
|
|
mergemaster -p [5]
|
|
make installworld
|
|
make delete-old
|
|
mergemaster [4]
|
|
<reboot>
|
|
|
|
|
|
To cross-install current onto a separate partition
|
|
--------------------------------------------------
|
|
# In this approach we use a separate partition to hold
|
|
# current's root, 'usr', and 'var' directories. A partition
|
|
# holding "/", "/usr" and "/var" should be about 2GB in
|
|
# size.
|
|
|
|
<make sure you have good level 0 dumps>
|
|
<boot into -stable>
|
|
make buildworld
|
|
make buildkernel KERNCONF=YOUR_KERNEL_HERE
|
|
<maybe newfs current's root partition>
|
|
<mount current's root partition on directory ${CURRENT_ROOT}>
|
|
make installworld DESTDIR=${CURRENT_ROOT}
|
|
make distribution DESTDIR=${CURRENT_ROOT} # if newfs'd
|
|
make installkernel KERNCONF=YOUR_KERNEL_HERE DESTDIR=${CURRENT_ROOT}
|
|
cp /etc/fstab ${CURRENT_ROOT}/etc/fstab # if newfs'd
|
|
<edit ${CURRENT_ROOT}/etc/fstab to mount "/" from the correct partition>
|
|
<reboot into current>
|
|
<do a "native" rebuild/install as described in the previous section>
|
|
<maybe install compatibility libraries from ports/misc/compat*>
|
|
<reboot>
|
|
|
|
|
|
To upgrade in-place from 5.x-stable to current
|
|
----------------------------------------------
|
|
<make sure you have good level 0 dumps>
|
|
make buildworld [9]
|
|
make kernel KERNCONF=YOUR_KERNEL_HERE [8]
|
|
[1]
|
|
<reboot in single user> [3]
|
|
mergemaster -p [5]
|
|
make installworld
|
|
make delete-old
|
|
mergemaster -i [4]
|
|
<reboot>
|
|
|
|
Make sure that you've read the UPDATING file to understand the
|
|
tweaks to various things you need. At this point in the life
|
|
cycle of current, things change often and you are on your own
|
|
to cope. The defaults can also change, so please read ALL of
|
|
the UPDATING entries.
|
|
|
|
Also, if you are tracking -current, you must be subscribed to
|
|
freebsd-current@freebsd.org. Make sure that before you update
|
|
your sources that you have read and understood all the recent
|
|
messages there. If in doubt, please track -stable which has
|
|
much fewer pitfalls.
|
|
|
|
[1] If you have third party modules, such as vmware, you
|
|
should disable them at this point so they don't crash your
|
|
system on reboot.
|
|
|
|
[3] From the bootblocks, boot -s, and then do
|
|
fsck -p
|
|
mount -u /
|
|
mount -a
|
|
cd src
|
|
adjkerntz -i # if CMOS is wall time
|
|
Also, when doing a major release upgrade, it is required that
|
|
you boot into single user mode to do the installworld.
|
|
|
|
[4] Note: This step is non-optional. Failure to do this step
|
|
can result in a significant reduction in the functionality of the
|
|
system. Attempting to do it by hand is not recommended and those
|
|
that pursue this avenue should read this file carefully, as well
|
|
as the archives of freebsd-current and freebsd-hackers mailing lists
|
|
for potential gotchas.
|
|
|
|
[5] Usually this step is a noop. However, from time to time
|
|
you may need to do this if you get unknown user in the following
|
|
step. It never hurts to do it all the time. You may need to
|
|
install a new mergemaster (cd src/usr.sbin/mergemaster && make
|
|
install) after the buildworld before this step if you last updated
|
|
from current before 20020224 or from -stable before 20020408.
|
|
|
|
[8] In order to have a kernel that can run the 4.x binaries
|
|
needed to do an installworld, you must include the COMPAT_FREEBSD4
|
|
option in your kernel. Failure to do so may leave you with a system
|
|
that is hard to boot to recover. A similar kernel option COMPAT_FREEBSD5
|
|
is required to run the 5.x binaries on more recent kernels.
|
|
|
|
Make sure that you merge any new devices from GENERIC since the
|
|
last time you updated your kernel config file.
|
|
|
|
[9] When checking out sources, you must include the -P flag to have
|
|
cvs prune empty directories.
|
|
|
|
If CPUTYPE is defined in your /etc/make.conf, make sure to use the
|
|
"?=" instead of the "=" assignment operator, so that buildworld can
|
|
override the CPUTYPE if it needs to.
|
|
|
|
MAKEOBJDIRPREFIX must be defined in an environment variable, and
|
|
not on the command line, or in /etc/make.conf. buildworld will
|
|
warn if it is improperly defined.
|
|
FORMAT:
|
|
|
|
This file contains a list, in reverse chronological order, of major
|
|
breakages in tracking -current. Not all things will be listed here,
|
|
and it only starts on October 16, 2004. Updating files can found in
|
|
previous releases if your system is older than this.
|
|
|
|
Copyright information:
|
|
|
|
Copyright 1998-2005 M. Warner Losh. All Rights Reserved.
|
|
|
|
Redistribution, publication, translation and use, with or without
|
|
modification, in full or in part, in any form or format of this
|
|
document are permitted without further permission from the author.
|
|
|
|
THIS DOCUMENT IS PROVIDED BY WARNER LOSH ``AS IS'' AND ANY EXPRESS OR
|
|
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL WARNER LOSH BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
If you find this document useful, and you want to, you may buy the
|
|
author a beer.
|
|
|
|
Contact Warner Losh if you have any questions about your use of
|
|
this document.
|
|
|
|
$FreeBSD$
|