d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f15b8850dd
freebsd-nq/sys/dev/sio/sio.c
Garrett Wollman 2f86936a07 Finished device configuration database work for all ISA devices (except `ze') 
and all SCSI devices (except that it's not done quite the way I want).  New
information added includes:

-	A text description of the device
-	A ``state''---unknown, unconfigured, idle, or busy
-	A generic parent device (with support in the m.i. code)
-	An interrupt mask type field (which will hopefully go away) so that
.	  ``doconfig'' can be written

This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00

2206 lines
56 KiB
C
Raw Blame History

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)com.c 7.5 (Berkeley) 5/16/91
* $Id: sio.c,v 1.57 1994/10/20 00:45:36 phk Exp $
*/
#include "sio.h"
#if NSIO > 0
/*
* Serial driver, based on 386BSD-0.1 com driver.
* Mostly rewritten to use pseudo-DMA.
* Works for National Semiconductor NS8250-NS16550AF UARTs.
* COM driver, based on HP dca driver.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#define TTYDEFCHARS /* XXX TK2.0 */
#include <sys/tty.h>
#undef TTYDEFCHARS
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/conf.h>
#include <sys/dkstat.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/syslog.h>
#include <sys/devconf.h>
#include <machine/clock.h>
#include <i386/isa/icu.h> /* XXX just to get at `imen' */
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/sioreg.h>
#include <i386/isa/ic/ns16550.h>
/*
* XXX temporary kludges for 2.0 (XXX TK2.0).
*/
#define TS_RTS_IFLOW 0
#define TSA_CARR_ON(tp) ((void *)&(tp)->t_rawq)
#define TSA_OCOMPLETE(tp) ((void *)&(tp)->t_outq)
#define TSA_OLOWAT(tp) ((void *)&(tp)->t_outq)
void
termioschars(t)
struct termios *t;
{
bcopy(ttydefchars, t->c_cc, sizeof t->c_cc);
}
#define LOTS_OF_EVENTS 64 /* helps separate urgent events from input */
#define RB_I_HIGH_WATER (TTYHOG - 2 * RS_IBUFSIZE)
#define RS_IBUFSIZE 256
#define TTY_BI TTY_FE /* XXX */
#define TTY_OE TTY_PE /* XXX */
#define CALLOUT_MASK 0x80
#define CONTROL_MASK 0x60
#define CONTROL_INIT_STATE 0x20
#define CONTROL_LOCK_STATE 0x40
#define DEV_TO_UNIT(dev) (MINOR_TO_UNIT(minor(dev)))
#define MINOR_MAGIC_MASK (CALLOUT_MASK | CONTROL_MASK)
#define MINOR_TO_UNIT(mynor) ((mynor) & ~MINOR_MAGIC_MASK)
#ifdef COM_MULTIPORT
/* checks in flags for multiport and which is multiport "master chip"
* for a given card
*/
#define COM_ISMULTIPORT(dev) ((dev)->id_flags & 0x01)
#define COM_MPMASTER(dev) (((dev)->id_flags >> 8) & 0x0ff)
#define COM_NOTAST4(dev) ((dev)->id_flags & 0x04)
#endif /* COM_MULTIPORT */
#define COM_NOFIFO(dev) ((dev)->id_flags & 0x02)
#define COM_VERBOSE(dev) ((dev)->id_flags & 0x80)
#define com_scr 7 /* scratch register for 16450-16550 (R/W) */
/*
* Input buffer watermarks.
* The external device is asked to stop sending when the buffer exactly reaches
* high water, or when the high level requests it.
* The high level is notified immediately (rather than at a later clock tick)
* when this watermark is reached.
* The buffer size is chosen so the watermark should almost never be reached.
* The low watermark is invisibly 0 since the buffer is always emptied all at
* once.
*/
#define RS_IHIGHWATER (3 * RS_IBUFSIZE / 4)
/*
* com state bits.
* (CS_BUSY | CS_TTGO) and (CS_BUSY | CS_TTGO | CS_ODEVREADY) must be higher
* than the other bits so that they can be tested as a group without masking
* off the low bits.
*
* The following com and tty flags correspond closely:
* TS_BUSY = CS_BUSY (maintained by comstart() and comflush())
* CS_TTGO = ~TS_TTSTOP (maintained by comstart() and siostop())
* CS_CTS_OFLOW = CCTS_OFLOW (maintained by comparam())
* CS_RTS_IFLOW = CRTS_IFLOW (maintained by comparam())
* TS_FLUSH is not used.
* XXX I think TIOCSETA doesn't clear TS_TTSTOP when it clears IXON.
* XXX CS_*FLOW should be CF_*FLOW in com->flags (control flags not state).
*/
#define CS_BUSY 0x80 /* output in progress */
#define CS_TTGO 0x40 /* output not stopped by XOFF */
#define CS_ODEVREADY 0x20 /* external device h/w ready (CTS) */
#define CS_CHECKMSR 1 /* check of MSR scheduled */
#define CS_CTS_OFLOW 2 /* use CTS output flow control */
#define CS_DTR_OFF 0x10 /* DTR held off */
#define CS_ODONE 4 /* output completed */
#define CS_RTS_IFLOW 8 /* use RTS input flow control */
static char const * const error_desc[] = {
#define CE_OVERRUN 0
"silo overflow",
#define CE_INTERRUPT_BUF_OVERFLOW 1
"interrupt-level buffer overflow",
#define CE_TTY_BUF_OVERFLOW 2
"tty-level buffer overflow",
};
#define CE_NTYPES 3
#define CE_RECORD(com, errnum) (++(com)->delta_error_counts[errnum])
/* types. XXX - should be elsewhere */
typedef u_int Port_t; /* hardware port */
typedef u_char bool_t; /* boolean */
/* com device structure */
struct com_s {
u_char state; /* miscellaneous flag bits */
bool_t active_out; /* nonzero if the callout device is open */
u_char cfcr_image; /* copy of value written to CFCR */
u_char ftl; /* current rx fifo trigger level */
u_char ftl_init; /* ftl_max for next open() */
u_char ftl_max; /* maximum ftl for curent open() */
bool_t hasfifo; /* nonzero for 16550 UARTs */
u_char mcr_image; /* copy of value written to MCR */
#ifdef COM_MULTIPORT
bool_t multiport; /* is this unit part of a multiport device? */
#endif /* COM_MULTIPORT */
bool_t no_irq; /* nonzero if irq is not attached */
bool_t poll; /* nonzero if polling is required */
int dtr_wait; /* time to hold DTR down on close (* 1/hz) */
u_int tx_fifo_size;
u_int wopeners; /* # processes waiting for DCD in open() */
/*
* The high level of the driver never reads status registers directly
* because there would be too many side effects to handle conveniently.
* Instead, it reads copies of the registers stored here by the
* interrupt handler.
*/
u_char last_modem_status; /* last MSR read by intr handler */
u_char prev_modem_status; /* last MSR handled by high level */
u_char hotchar; /* ldisc-specific char to be handled ASAP */
u_char *ibuf; /* start of input buffer */
u_char *ibufend; /* end of input buffer */
u_char *ihighwater; /* threshold in input buffer */
u_char *iptr; /* next free spot in input buffer */
u_char *obufend; /* end of output buffer */
u_char *optr; /* next char to output */
Port_t data_port; /* i/o ports */
Port_t int_id_port;
Port_t iobase;
Port_t modem_ctl_port;
Port_t line_status_port;
Port_t modem_status_port;
struct tty *tp; /* cross reference */
/* Initial state. */
struct termios it_in; /* should be in struct tty */
struct termios it_out;
/* Lock state. */
struct termios lt_in; /* should be in struct tty */
struct termios lt_out;
bool_t do_timestamp;
struct timeval timestamp;
u_long bytes_in; /* statistics */
u_long bytes_out;
u_int delta_error_counts[CE_NTYPES];
u_int error_counts[CE_NTYPES];
/*
* Ping-pong input buffers. The extra factor of 2 in the sizes is
* to allow for an error byte for each input byte.
*/
#define CE_INPUT_OFFSET RS_IBUFSIZE
u_char ibuf1[2 * RS_IBUFSIZE];
u_char ibuf2[2 * RS_IBUFSIZE];
/*
* Output buffer. Someday we should avoid copying. Twice.
*/
u_char obuf[256];
};
/*
* The public functions in the com module ought to be declared in a com-driver
* system header.
*/
/* Interrupt handling entry points. */
void siointr __P((int unit));
void siopoll __P((void));
/* Device switch entry points. */
int sioopen __P((dev_t dev, int oflags, int devtype,
struct proc *p));
int sioclose __P((dev_t dev, int fflag, int devtype,
struct proc *p));
int sioread __P((dev_t dev, struct uio *uio, int ioflag));
int siowrite __P((dev_t dev, struct uio *uio, int ioflag));
int sioioctl __P((dev_t dev, int cmd, caddr_t data,
int fflag, struct proc *p));
void siostop __P((struct tty *tp, int rw));
#define sioreset noreset
int sioselect __P((dev_t dev, int rw, struct proc *p));
#define siommap nommap
#define siostrategy nostrategy
/* Console device entry points. */
int siocngetc __P((dev_t dev));
int siocncheckc __P((dev_t dev));
struct consdev;
void siocninit __P((struct consdev *cp));
void siocnprobe __P((struct consdev *cp));
void siocnputc __P((dev_t dev, int c));
static int sioattach __P((struct isa_device *dev));
static timeout_t siodtrwakeup;
static void comflush __P((struct com_s *com));
static void comhardclose __P((struct com_s *com));
static void siointr1 __P((struct com_s *com));
static void commctl __P((struct com_s *com, int bits, int how));
static int comparam __P((struct tty *tp, struct termios *t));
static int sioprobe __P((struct isa_device *dev));
static void comstart __P((struct tty *tp));
static timeout_t comwakeup;
static int tiocm_xxx2mcr __P((int tiocm_xxx));
#ifdef DSI_SOFT_MODEM
static int LoadSoftModem __P((int unit,int base_io, u_long size, u_char *ptr));
#endif /* DSI_SOFT_MODEM */
/* table and macro for fast conversion from a unit number to its com struct */
static struct com_s *p_com_addr[NSIO];
#define com_addr(unit) (p_com_addr[unit])
static struct timeval intr_timestamp;
struct isa_driver siodriver = {
sioprobe, sioattach, "sio"
};
#ifdef COMCONSOLE
static int comconsole = COMCONSOLE;
#else
static int comconsole = -1;
#endif
static speed_t comdefaultrate = TTYDEF_SPEED;
static u_int com_events; /* input chars + weighted output completions */
static int commajor;
#if 0 /* XXX TK2.0 */
struct tty *sio_tty[NSIO];
#else
struct tty sio_tty[NSIO];
#endif
extern struct tty *constty; /* XXX */
#ifdef KGDB
#include "machine/remote-sl.h"
extern int kgdb_dev;
extern int kgdb_rate;
extern int kgdb_debug_init;
#endif
static struct speedtab comspeedtab[] = {
0, 0,
50, COMBRD(50),
75, COMBRD(75),
110, COMBRD(110),
134, COMBRD(134),
150, COMBRD(150),
200, COMBRD(200),
300, COMBRD(300),
600, COMBRD(600),
1200, COMBRD(1200),
1800, COMBRD(1800),
2400, COMBRD(2400),
4800, COMBRD(4800),
9600, COMBRD(9600),
19200, COMBRD(19200),
38400, COMBRD(38400),
57600, COMBRD(57600),
115200, COMBRD(115200),
-1, -1
};
/* XXX - configure this list */
static Port_t likely_com_ports[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, };
static int
sioprobe(dev)
struct isa_device *dev;
{
static bool_t already_init;
Port_t *com_ptr;
bool_t failures[10];
int fn;
struct isa_device *idev;
Port_t iobase;
u_char mcr_image;
int result;
if (!already_init) {
/*
* Turn off MCR_IENABLE for all likely serial ports. An unused
* port with its MCR_IENABLE gate open will inhibit interrupts
* from any used port that shares the interrupt vector.
* XXX the gate enable is elsewhere for some multiports.
*/
for (com_ptr = likely_com_ports;
com_ptr < &likely_com_ports[sizeof likely_com_ports
/ sizeof likely_com_ports[0]];
++com_ptr)
outb(*com_ptr + com_mcr, 0);
already_init = TRUE;
}
/*
* If the device is on a multiport card and has an AST/4
* compatible interrupt control register, initialize this
* register and prepare to leave MCR_IENABLE clear in the mcr.
* Otherwise, prepare to set MCR_IENABLE in the mcr.
* Point idev to the device struct giving the correct id_irq.
* This is the struct for the master device if there is one.
*/
idev = dev;
mcr_image = MCR_IENABLE;
#ifdef COM_MULTIPORT
if (COM_ISMULTIPORT(dev)) {
idev = find_isadev(isa_devtab_tty, &siodriver,
COM_MPMASTER(dev));
if (idev == NULL) {
printf("sio%d: master device %d not configured\n",
dev->id_unit, COM_MPMASTER(dev));
return (0);
}
if (!COM_NOTAST4(dev)) {
outb(idev->id_iobase + com_scr,
idev->id_irq ? 0x80 : 0);
mcr_image = 0;
}
}
#endif /* COM_MULTIPORT */
if (idev->id_irq == 0)
mcr_image = 0;
bzero(failures, sizeof failures);
iobase = dev->id_iobase;
/*
* We don't want to get actual interrupts, just masked ones.
* Interrupts from this line should already be masked in the ICU,
* but mask them in the processor as well in case there are some
* (misconfigured) shared interrupts.
*/
disable_intr();
/*
* XXX DELAY() reenables CPU interrupts. This is a problem for
* shared interrupts after the first device using one has been
* successfully probed - config_isadev() has enabled the interrupt
* in the ICU.
*/
outb(IO_ICU1 + 1, 0xff);
/*
* Initialize the speed and the word size and wait long enough to
* drain the maximum of 16 bytes of junk in device output queues.
* The speed is undefined after a master reset and must be set
* before relying on anything related to output. There may be
* junk after a (very fast) soft reboot and (apparently) after
* master reset.
* XXX what about the UART bug avoided by waiting in comparam()?
* We don't want to to wait long enough to drain at 2 bps.
*/
outb(iobase + com_cfcr, CFCR_DLAB);
outb(iobase + com_dlbl, COMBRD(9600) & 0xff);
outb(iobase + com_dlbh, (u_int) COMBRD(9600) >> 8);
outb(iobase + com_cfcr, CFCR_8BITS);
DELAY((16 + 1) * 9600 / 10);
/*
* Enable the interrupt gate and disable device interupts. This
* should leave the device driving the interrupt line low and
* guarantee an edge trigger if an interrupt can be generated.
*/
outb(iobase + com_mcr, mcr_image);
outb(iobase + com_ier, 0);
/*
* Attempt to set loopback mode so that we can send a null byte
* without annoying any external device.
*/
outb(iobase + com_mcr, mcr_image | MCR_LOOPBACK);
/*
* Attempt to generate an output interrupt. On 8250's, setting
* IER_ETXRDY generates an interrupt independent of the current
* setting and independent of whether the THR is empty. On 16450's,
* setting IER_ETXRDY generates an interrupt independent of the
* current setting. On 16550A's, setting IER_ETXRDY only
* generates an interrupt when IER_ETXRDY is not already set.
*/
outb(iobase + com_ier, IER_ETXRDY);
/*
* On some 16x50 incompatibles, setting IER_ETXRDY doesn't generate
* an interrupt. They'd better generate one for actually doing
* output. Loopback may be broken on the same incompatibles but
* it's unlikely to do more than allow the null byte out.
*/
outb(iobase + com_data, 0);
DELAY((1 + 2) * 9600 / 10);
/*
* Turn off loopback mode so that the interrupt gate works again
* (MCR_IENABLE was hidden). This should leave the device driving
* an interrupt line high. It doesn't matter if the interrupt
* line oscillates while we are not looking at it, since interrupts
* are disabled.
*/
outb(iobase + com_mcr, mcr_image);
/*
* Check that
* o the CFCR, IER and MCR in UART hold the values written to them
* (the values happen to be all distinct - this is good for
* avoiding false positive tests from bus echoes).
* o an output interrupt is generated and its vector is correct.
* o the interrupt goes away when the IIR in the UART is read.
*/
failures[0] = inb(iobase + com_cfcr) - CFCR_8BITS;
failures[1] = inb(iobase + com_ier) - IER_ETXRDY;
failures[2] = inb(iobase + com_mcr) - mcr_image;
if (idev->id_irq != 0)
failures[3] = isa_irq_pending(idev) ? 0 : 1;
failures[4] = (inb(iobase + com_iir) & IIR_IMASK) - IIR_TXRDY;
if (idev->id_irq != 0)
failures[5] = isa_irq_pending(idev) ? 1 : 0;
failures[6] = (inb(iobase + com_iir) & IIR_IMASK) - IIR_NOPEND;
/*
* Turn off all device interrupts and check that they go off properly.
* Leave MCR_IENABLE alone. For ports without a master port, it gates
* the OUT2 output of the UART to
* the ICU input. Closing the gate would give a floating ICU input
* (unless there is another device driving at) and spurious interrupts.
* (On the system that this was first tested on, the input floats high
* and gives a (masked) interrupt as soon as the gate is closed.)
*/
outb(iobase + com_ier, 0);
outb(iobase + com_cfcr, CFCR_8BITS); /* dummy to avoid bus echo */
failures[7] = inb(iobase + com_ier);
if (idev->id_irq != 0)
failures[8] = isa_irq_pending(idev) ? 1 : 0;
failures[9] = (inb(iobase + com_iir) & IIR_IMASK) - IIR_NOPEND;
outb(IO_ICU1 + 1, imen); /* XXX */
enable_intr();
result = IO_COMSIZE;
for (fn = 0; fn < sizeof failures; ++fn)
if (failures[fn]) {
outb(iobase + com_mcr, 0);
result = 0;
if (COM_VERBOSE(dev))
printf("sio%d: probe test %d failed\n",
dev->id_unit, fn);
}
return (result);
}
static struct kern_devconf kdc_sio[NSIO] = { {
0, 0, 0, /* filled in by dev_attach */
"sio", 0, { MDDT_ISA, 0, "tty" },
isa_generic_externalize, 0, 0, ISA_EXTERNALLEN,
&kdc_isa0, /* parent */
0, /* parentdata */
DC_UNKNOWN, /* not supported */
"RS-232 serial port"
} };
static inline void
sio_registerdev(struct isa_device *id)
{
if(id->id_unit)
kdc_sio[id->id_unit] = kdc_sio[0];
kdc_sio[id->id_unit].kdc_unit = id->id_unit;
kdc_sio[id->id_unit].kdc_isa = id;
dev_attach(&kdc_sio[id->id_unit]);
}
static int
sioattach(isdp)
struct isa_device *isdp;
{
struct com_s *com;
static bool_t comwakeup_started = FALSE;
Port_t iobase;
int s;
int unit;
isdp->id_ri_flags |= RI_FAST;
iobase = isdp->id_iobase;
unit = isdp->id_unit;
com = malloc(sizeof *com, M_TTYS, M_NOWAIT);
if (com == NULL)
return (0);
/*
* sioprobe() has initialized the device registers as follows:
* o cfcr = CFCR_8BITS.
* It is most important that CFCR_DLAB is off, so that the
* data port is not hidden when we enable interrupts.
* o ier = 0.
* Interrupts are only enabled when the line is open.
* o mcr = MCR_IENABLE, or 0 if the port has AST/4 compatible
* interrupt control register or the config specifies no irq.
* Keeping MCR_DTR and MCR_RTS off might stop the external
* device from sending before we are ready.
*/
bzero(com, sizeof *com);
com->cfcr_image = CFCR_8BITS;
com->dtr_wait = 3 * hz;
com->no_irq = isdp->id_irq == 0;
com->tx_fifo_size = 1;
com->iptr = com->ibuf = com->ibuf1;
com->ibufend = com->ibuf1 + RS_IBUFSIZE;
com->ihighwater = com->ibuf1 + RS_IHIGHWATER;
com->iobase = iobase;
com->data_port = iobase + com_data;
com->int_id_port = iobase + com_iir;
com->modem_ctl_port = iobase + com_mcr;
com->mcr_image = inb(com->modem_ctl_port);
com->line_status_port = iobase + com_lsr;
com->modem_status_port = iobase + com_msr;
/*
* We don't use all the flags from <sys/ttydefaults.h> since they
* are only relevant for logins. It's important to have echo off
* initially so that the line doesn't start blathering before the
* echo flag can be turned off.
*/
com->it_in.c_iflag = 0;
com->it_in.c_oflag = 0;
com->it_in.c_cflag = TTYDEF_CFLAG;
com->it_in.c_lflag = 0;
if (unit == comconsole) {
com->it_in.c_iflag = TTYDEF_IFLAG;
com->it_in.c_oflag = TTYDEF_OFLAG;
com->it_in.c_cflag = TTYDEF_CFLAG | CLOCAL;
com->it_in.c_lflag = TTYDEF_LFLAG;
com->lt_out.c_cflag = com->lt_in.c_cflag = CLOCAL;
}
termioschars(&com->it_in);
com->it_in.c_ispeed = com->it_in.c_ospeed = comdefaultrate;
com->it_out = com->it_in;
/* attempt to determine UART type */
printf("sio%d: type", unit);
#ifdef DSI_SOFT_MODEM
if((inb(iobase+7) ^ inb(iobase+7)) & 0x80) {
printf(" Digicom Systems, Inc. SoftModem");
goto determined_type;
}
#endif /* DSI_SOFT_MODEM */
#ifdef COM_MULTIPORT
if (!COM_ISMULTIPORT(isdp))
#endif
{
u_char scr;
u_char scr1;
u_char scr2;
scr = inb(iobase + com_scr);
outb(iobase + com_scr, 0xa5);
scr1 = inb(iobase + com_scr);
outb(iobase + com_scr, 0x5a);
scr2 = inb(iobase + com_scr);
outb(iobase + com_scr, scr);
if (scr1 != 0xa5 || scr2 != 0x5a) {
printf(" 8250");
goto determined_type;
}
}
outb(iobase + com_fifo, FIFO_ENABLE | FIFO_TRIGGER_14);
DELAY(100);
switch (inb(com->int_id_port) & IIR_FIFO_MASK) {
case FIFO_TRIGGER_1:
printf(" 16450");
break;
case FIFO_TRIGGER_4:
printf(" 16450?");
break;
case FIFO_TRIGGER_8:
printf(" 16550?");
break;
case FIFO_TRIGGER_14:
printf(" 16550A");
if (COM_NOFIFO(isdp))
printf(" fifo disabled");
else {
com->hasfifo = TRUE;
com->ftl_init = FIFO_TRIGGER_14;
com->tx_fifo_size = 16;
}
break;
}
outb(iobase + com_fifo, 0);
determined_type: ;
#ifdef COM_MULTIPORT
if (COM_ISMULTIPORT(isdp)) {
com->multiport = TRUE;
printf(" (multiport");
if (unit == COM_MPMASTER(isdp))
printf(" master");
printf(")");
com->no_irq = find_isadev(isa_devtab_tty, &siodriver,
COM_MPMASTER(isdp))->id_irq == 0;
}
#endif /* COM_MULTIPORT */
printf("\n");
sio_registerdev(isdp);
#ifdef KGDB
if (kgdb_dev == makedev(commajor, unit)) {
if (unit == comconsole)
kgdb_dev = -1; /* can't debug over console port */
else {
int divisor;
/*
* XXX now unfinished and broken. Need to do
* something more like a full open(). There's no
* suitable interrupt handler so don't enable device
* interrupts. Watch out for null tp's.
*/
outb(iobase + com_cfcr, CFCR_DLAB);
divisor = ttspeedtab(kgdb_rate, comspeedtab);
outb(iobase + com_dlbl, divisor & 0xFF);
outb(iobase + com_dlbh, (u_int) divisor >> 8);
outb(iobase + com_cfcr, CFCR_8BITS);
outb(com->modem_status_port,
com->mcr_image |= MCR_DTR | MCR_RTS);
if (kgdb_debug_init) {
/*
* Print prefix of device name,
* let kgdb_connect print the rest.
*/
printf("sio%d: ", unit);
kgdb_connect(1);
} else
printf("sio%d: kgdb enabled\n", unit);
}
}
#endif
s = spltty();
com_addr(unit) = com;
splx(s);
if (!comwakeup_started) {
comwakeup((void *)NULL);
comwakeup_started = TRUE;
}
return (1);
}
/* ARGSUSED */
int
sioopen(dev, flag, mode, p)
dev_t dev;
int flag;
int mode;
struct proc *p;
{
struct com_s *com;
int error;
Port_t iobase;
int mynor;
int s;
struct tty *tp;
int unit;
mynor = minor(dev);
unit = MINOR_TO_UNIT(mynor);
if ((u_int) unit >= NSIO || (com = com_addr(unit)) == NULL)
return (ENXIO);
if (mynor & CONTROL_MASK)
return (0);
#if 0 /* XXX TK2.0 */
tp = com->tp = sio_tty[unit] = ttymalloc(sio_tty[unit]);
#else
tp = com->tp = &sio_tty[unit];
#endif
s = spltty();
/*
* We jump to this label after all non-interrupted sleeps to pick
* up any changes of the device state.
*/
open_top:
while (com->state & CS_DTR_OFF) {
error = tsleep(&com->dtr_wait, TTIPRI | PCATCH, "siodtr", 0);
if (error != 0)
goto out;
}
if (tp->t_state & TS_ISOPEN) {
/*
* The device is open, so everything has been initialized.
* Handle conflicts.
*/
if (mynor & CALLOUT_MASK) {
if (!com->active_out) {
error = EBUSY;
goto out;
}
} else {
if (com->active_out) {
if (flag & O_NONBLOCK) {
error = EBUSY;
goto out;
}
error = tsleep(&com->active_out,
TTIPRI | PCATCH, "siobi", 0);
if (error != 0)
goto out;
goto open_top;
}
}
if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) {
error = EBUSY;
goto out;
}
} else {
/*
* The device isn't open, so there are no conflicts.
* Initialize it. Initialization is done twice in many
* cases: to preempt sleeping callin opens if we are
* callout, and to complete a callin open after DCD rises.
*/
tp->t_oproc = comstart;
tp->t_param = comparam;
tp->t_dev = dev;
tp->t_termios = mynor & CALLOUT_MASK
? com->it_out : com->it_in;
commctl(com, MCR_DTR | MCR_RTS, DMSET);
com->ftl_max = com->ftl_init;
com->poll = com->no_irq;
++com->wopeners;
error = comparam(tp, &tp->t_termios);
--com->wopeners;
if (error != 0)
goto out;
/*
* XXX we should goto open_top if comparam() slept.
*/
ttsetwater(tp);
iobase = com->iobase;
if (com->hasfifo) {
/*
* (Re)enable and drain fifos.
*
* Certain SMC chips cause problems if the fifos
* are enabled while input is ready. Turn off the
* fifo if necessary to clear the input. We test
* the input ready bit after enabling the fifos
* since we've already enabled them in comparam()
* and to handle races between enabling and fresh
* input.
*/
while (TRUE) {
outb(iobase + com_fifo,
FIFO_RCV_RST | FIFO_XMT_RST
| FIFO_ENABLE | com->ftl);
DELAY(100);
if (!(inb(com->line_status_port) & LSR_RXRDY))
break;
outb(iobase + com_fifo, 0);
DELAY(100);
(void) inb(com->data_port);
}
}
disable_intr();
(void) inb(com->line_status_port);
(void) inb(com->data_port);
com->prev_modem_status =
com->last_modem_status = inb(com->modem_status_port);
outb(iobase + com_ier, IER_ERXRDY | IER_ETXRDY | IER_ERLS
| IER_EMSC);
enable_intr();
/*
* Handle initial DCD. Callout devices get a fake initial
* DCD (trapdoor DCD). If we are callout, then any sleeping
* callin opens get woken up and resume sleeping on "siobi"
* instead of "siodcd".
*/
if (com->prev_modem_status & MSR_DCD || mynor & CALLOUT_MASK)
(*linesw[tp->t_line].l_modem)(tp, 1);
}
/*
* Wait for DCD if necessary.
*/
if (!(tp->t_state & TS_CARR_ON) && !(mynor & CALLOUT_MASK)
&& !(tp->t_cflag & CLOCAL) && !(flag & O_NONBLOCK)) {
++com->wopeners;
error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH, "siodcd", 0);
--com->wopeners;
if (error != 0)
goto out;
goto open_top;
}
error = (*linesw[tp->t_line].l_open)(dev, tp);
if (tp->t_state & TS_ISOPEN && mynor & CALLOUT_MASK)
com->active_out = TRUE;
out:
splx(s);
if (!(tp->t_state & TS_ISOPEN) && com->wopeners == 0)
comhardclose(com);
return (error);
}
/*ARGSUSED*/
int
sioclose(dev, flag, mode, p)
dev_t dev;
int flag;
int mode;
struct proc *p;
{
struct com_s *com;
int mynor;
int s;
struct tty *tp;
mynor = minor(dev);
if (mynor & CONTROL_MASK)
return (0);
com = com_addr(MINOR_TO_UNIT(mynor));
tp = com->tp;
s = spltty();
timeout(wakeup, TSA_OCOMPLETE(tp), 60 * hz);
(*linesw[tp->t_line].l_close)(tp, flag);
untimeout(wakeup, TSA_OCOMPLETE(tp));
siostop(tp, FREAD | FWRITE);
comhardclose(com);
ttyclose(tp);
splx(s);
return (0);
}
static void
comhardclose(com)
struct com_s *com;
{
Port_t iobase;
int s;
struct tty *tp;
int unit;
unit = DEV_TO_UNIT(com->tp->t_dev);
iobase = com->iobase;
s = spltty();
com->poll = FALSE;
com->do_timestamp = 0;
outb(iobase + com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
#ifdef KGDB
/* do not disable interrupts or hang up if debugging */
if (kgdb_dev != makedev(commajor, unit))
#endif
{
outb(iobase + com_ier, 0);
tp = com->tp;
if (tp->t_cflag & HUPCL
/*
* XXX we will miss any carrier drop between here and the
* next open. Perhaps we should watch DCD even when the
* port is closed; it is not sufficient to check it at
* the next open because it might go up and down while
* we're not watching.
*/
|| !com->active_out
&& !(com->prev_modem_status & MSR_DCD)
&& !(com->it_in.c_cflag & CLOCAL)
|| !(tp->t_state & TS_ISOPEN)) {
commctl(com, MCR_RTS, DMSET);
if (com->dtr_wait != 0) {
timeout(siodtrwakeup, com, com->dtr_wait);
com->state |= CS_DTR_OFF;
}
}
}
com->active_out = FALSE;
wakeup(&com->active_out);
wakeup(TSA_CARR_ON(tp)); /* restart any wopeners */
splx(s);
}
int
sioread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int mynor;
struct tty *tp;
mynor = minor(dev);
if (mynor & CONTROL_MASK)
return (ENODEV);
tp = com_addr(MINOR_TO_UNIT(mynor))->tp;
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
siowrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int mynor;
struct tty *tp;
int unit;
mynor = minor(dev);
if (mynor & CONTROL_MASK)
return (ENODEV);
unit = MINOR_TO_UNIT(mynor);
tp = com_addr(unit)->tp;
/*
* (XXX) We disallow virtual consoles if the physical console is
* a serial port. This is in case there is a display attached that
* is not the console. In that situation we don't need/want the X
* server taking over the console.
*/
if (constty && unit == comconsole)
constty = NULL;
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
static void
siodtrwakeup(chan)
void *chan;
{
struct com_s *com;
com = (struct com_s *)chan;
com->state &= ~CS_DTR_OFF;
wakeup(&com->dtr_wait);
}
/* Interrupt routine for timekeeping purposes */
void
siointrts(unit)
int unit;
{
microtime(&intr_timestamp);
siointr(unit);
}
void
siointr(unit)
int unit;
{
#ifndef COM_MULTIPORT
siointr1(com_addr(unit));
#else /* COM_MULTIPORT */
struct com_s *com;
bool_t possibly_more_intrs;
/*
* Loop until there is no activity on any port. This is necessary
* to get an interrupt edge more than to avoid another interrupt.
* If the IRQ signal is just an OR of the IRQ signals from several
* devices, then the edge from one may be lost because another is
* on.
*/
do {
possibly_more_intrs = FALSE;
for (unit = 0; unit < NSIO; ++unit) {
com = com_addr(unit);
if (com != NULL
&& (inb(com->int_id_port) & IIR_IMASK)
!= IIR_NOPEND) {
siointr1(com);
possibly_more_intrs = TRUE;
}
}
} while (possibly_more_intrs);
#endif /* COM_MULTIPORT */
}
static void
siointr1(com)
struct com_s *com;
{
u_char line_status;
u_char modem_status;
u_char *ioptr;
u_char recv_data;
if (com->do_timestamp)
/* XXX a little bloat here... */
com->timestamp = intr_timestamp;
while (TRUE) {
line_status = inb(com->line_status_port);
/* input event? (check first to help avoid overruns) */
while (line_status & LSR_RCV_MASK) {
/* break/unnattached error bits or real input? */
if (!(line_status & LSR_RXRDY))
recv_data = 0;
else
recv_data = inb(com->data_port);
++com->bytes_in;
if (com->hotchar != 0 && recv_data == com->hotchar)
setsofttty();
#ifdef KGDB
/* trap into kgdb? (XXX - needs testing and optim) */
if (recv_data == FRAME_END
&& !(com->tp->t_state & TS_ISOPEN)
&& kgdb_dev == makedev(commajor, unit)) {
kgdb_connect(0);
continue;
}
#endif /* KGDB */
ioptr = com->iptr;
if (ioptr >= com->ibufend)
CE_RECORD(com, CE_INTERRUPT_BUF_OVERFLOW);
else {
++com_events;
#if 0 /* for testing input latency vs efficiency */
if (com->iptr - com->ibuf == 8)
setsofttty();
#endif
ioptr[0] = recv_data;
ioptr[CE_INPUT_OFFSET] = line_status;
com->iptr = ++ioptr;
if (ioptr == com->ihighwater
&& com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port,
com->mcr_image &= ~MCR_RTS);
/* XXX - move this out of isr */
if (line_status & LSR_OE)
CE_RECORD(com, CE_OVERRUN);
}
/*
* "& 0x7F" is to avoid the gcc-1.40 generating a slow
* jump from the top of the loop to here
*/
line_status = inb(com->line_status_port) & 0x7F;
}
/* modem status change? (always check before doing output) */
modem_status = inb(com->modem_status_port);
if (modem_status != com->last_modem_status) {
/*
* Schedule high level to handle DCD changes. Note
* that we don't use the delta bits anywhere. Some
* UARTs mess them up, and it's easy to remember the
* previous bits and calculate the delta.
*/
com->last_modem_status = modem_status;
if (!(com->state & CS_CHECKMSR)) {
com_events += LOTS_OF_EVENTS;
com->state |= CS_CHECKMSR;
setsofttty();
}
/* handle CTS change immediately for crisp flow ctl */
if (com->state & CS_CTS_OFLOW) {
if (modem_status & MSR_CTS)
com->state |= CS_ODEVREADY;
else
com->state &= ~CS_ODEVREADY;
}
}
/* output queued and everything ready? */
if (line_status & LSR_TXRDY
&& com->state >= (CS_ODEVREADY | CS_BUSY | CS_TTGO)) {
ioptr = com->optr;
if (com->tx_fifo_size > 1) {
u_int ocount;
ocount = com->obufend - ioptr;
if (ocount > com->tx_fifo_size)
ocount = com->tx_fifo_size;
com->bytes_out += ocount;
do
outb(com->data_port, *ioptr++);
while (--ocount != 0);
} else {
outb(com->data_port, *ioptr++);
++com->bytes_out;
}
com->optr = ioptr;
if (ioptr >= com->obufend) {
/* output just completed */
com_events += LOTS_OF_EVENTS;
com->state ^= (CS_ODONE | CS_BUSY);
setsofttty(); /* handle at high level ASAP */
}
}
/* finished? */
#ifndef COM_MULTIPORT
if ((inb(com->int_id_port) & IIR_IMASK) == IIR_NOPEND)
#endif /* COM_MULTIPORT */
return;
}
}
static int
tiocm_xxx2mcr(tiocm_xxx)
int tiocm_xxx;
{
int mcr;
mcr = 0;
if (tiocm_xxx & TIOCM_DTR)
mcr |= MCR_DTR;
if (tiocm_xxx & TIOCM_RTS)
mcr |= MCR_RTS;
return (mcr);
}
int
sioioctl(dev, cmd, data, flag, p)
dev_t dev;
int cmd;
caddr_t data;
int flag;
struct proc *p;
{
struct com_s *com;
int error;
Port_t iobase;
int mcr;
int msr;
int mynor;
int s;
int tiocm_xxx;
struct tty *tp;
mynor = minor(dev);
com = com_addr(MINOR_TO_UNIT(mynor));
iobase = com->iobase;
if (mynor & CONTROL_MASK) {
struct termios *ct;
switch (mynor & CONTROL_MASK) {
case CONTROL_INIT_STATE:
ct = mynor & CALLOUT_MASK ? &com->it_out : &com->it_in;
break;
case CONTROL_LOCK_STATE:
ct = mynor & CALLOUT_MASK ? &com->lt_out : &com->lt_in;
break;
default:
return (ENODEV); /* /dev/nodev */
}
switch (cmd) {
case TIOCSETA:
error = suser(p->p_ucred, &p->p_acflag);
if (error)
return (error);
*ct = *(struct termios *)data;
return (0);
case TIOCGETA:
*(struct termios *)data = *ct;
return (0);
case TIOCGETD:
*(int *)data = TTYDISC;
return (0);
case TIOCGWINSZ:
bzero(data, sizeof(struct winsize));
return (0);
#ifdef DSI_SOFT_MODEM
/*
* Download micro-code to Digicom modem.
*/
case TIOCDSIMICROCODE:
{
u_long l;
u_char *p,*pi;
pi = (u_char*)(*(caddr_t*)data);
error = copyin(pi,&l,sizeof l);
if(error)
{return error;};
pi += sizeof l;
p = malloc(l,M_TEMP,M_NOWAIT);
if(!p)
{return ENOBUFS;}
error = copyin(pi,p,l);
if(error)
{free(p,M_TEMP); return error;};
if(error = LoadSoftModem(
MINOR_TO_UNIT(mynor),iobase,l,p))
{free(p,M_TEMP); return error;}
free(p,M_TEMP);
return(0);
}
#endif /* DSI_SOFT_MODEM */
default:
return (ENOTTY);
}
}
tp = com->tp;
if (cmd == TIOCSETA || cmd == TIOCSETAW || cmd == TIOCSETAF) {
int cc;
struct termios *dt = (struct termios *)data;
struct termios *lt = mynor & CALLOUT_MASK
? &com->lt_out : &com->lt_in;
dt->c_iflag = (tp->t_iflag & lt->c_iflag)
| (dt->c_iflag & ~lt->c_iflag);
dt->c_oflag = (tp->t_oflag & lt->c_oflag)
| (dt->c_oflag & ~lt->c_oflag);
dt->c_cflag = (tp->t_cflag & lt->c_cflag)
| (dt->c_cflag & ~lt->c_cflag);
dt->c_lflag = (tp->t_lflag & lt->c_lflag)
| (dt->c_lflag & ~lt->c_lflag);
for (cc = 0; cc < NCCS; ++cc)
if (lt->c_cc[cc] != 0)
dt->c_cc[cc] = tp->t_cc[cc];
if (lt->c_ispeed != 0)
dt->c_ispeed = tp->t_ispeed;
if (lt->c_ospeed != 0)
dt->c_ospeed = tp->t_ospeed;
}
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return (error);
error = ttioctl(tp, cmd, data, flag);
if (error >= 0)
return (error);
s = spltty();
switch (cmd) {
case TIOCSBRK:
outb(iobase + com_cfcr, com->cfcr_image |= CFCR_SBREAK);
break;
case TIOCCBRK:
outb(iobase + com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
break;
case TIOCSDTR:
commctl(com, MCR_DTR, DMBIS);
break;
case TIOCCDTR:
commctl(com, MCR_DTR, DMBIC);
break;
case TIOCMSET:
commctl(com, tiocm_xxx2mcr(*(int *)data), DMSET);
break;
case TIOCMBIS:
commctl(com, tiocm_xxx2mcr(*(int *)data), DMBIS);
break;
case TIOCMBIC:
commctl(com, tiocm_xxx2mcr(*(int *)data), DMBIC);
break;
case TIOCMGET:
tiocm_xxx = TIOCM_LE; /* XXX - always enabled while open */
mcr = com->mcr_image;
if (mcr & MCR_DTR)
tiocm_xxx |= TIOCM_DTR;
if (mcr & MCR_RTS)
tiocm_xxx |= TIOCM_RTS;
msr = com->prev_modem_status;
if (msr & MSR_CTS)
tiocm_xxx |= TIOCM_CTS;
if (msr & MSR_DCD)
tiocm_xxx |= TIOCM_CD;
if (msr & MSR_DSR)
tiocm_xxx |= TIOCM_DSR;
/*
* XXX - MSR_RI is naturally volatile, and we make MSR_TERI
* more volatile by reading the modem status a lot. Perhaps
* we should latch both bits until the status is read here.
*/
if (msr & (MSR_RI | MSR_TERI))
tiocm_xxx |= TIOCM_RI;
*(int *)data = tiocm_xxx;
break;
case TIOCMSDTRWAIT:
/* must be root since the wait applies to following logins */
error = suser(p->p_ucred, &p->p_acflag);
if (error != 0) {
splx(s);
return (EPERM);
}
com->dtr_wait = *(int *)data * 100 / hz;
break;
case TIOCMGDTRWAIT:
*(int *)data = com->dtr_wait;
break;
case TIOCTIMESTAMP:
com->do_timestamp = TRUE;
*(struct timeval *)data = com->timestamp;
break;
default:
splx(s);
return (ENOTTY);
}
splx(s);
return (0);
}
/* cancel pending output */
static void
comflush(com)
struct com_s *com;
{
disable_intr();
if (com->state & CS_ODONE)
com_events -= LOTS_OF_EVENTS;
com->state &= ~(CS_ODONE | CS_BUSY);
enable_intr();
com->tp->t_state &= ~TS_BUSY;
}
void
siopoll()
{
int unit;
if (com_events == 0)
return;
repeat:
for (unit = 0; unit < NSIO; ++unit) {
u_char *buf;
struct com_s *com;
u_char *ibuf;
int incc;
struct tty *tp;
com = com_addr(unit);
if (com == NULL)
continue;
tp = com->tp;
if (tp == NULL) {
/*
* XXX forget any events related to closed devices
* (actually never opened devices) so that we don't
* loop.
*/
disable_intr();
incc = com->iptr - com->ibuf;
com->iptr = com->ibuf;
if (com->state & CS_CHECKMSR) {
incc += LOTS_OF_EVENTS;
com->state &= ~CS_CHECKMSR;
}
com_events -= incc;
enable_intr();
if (incc != 0)
log(LOG_DEBUG,
"sio%d: %d events for device with no tp\n",
unit, incc);
continue;
}
/* switch the role of the low-level input buffers */
if (com->iptr == (ibuf = com->ibuf)) {
buf = NULL; /* not used, but compiler can't tell */
incc = 0;
} else {
/*
* Prepare to reduce input latency for packet
* discplines with a end of packet character.
* XXX should be elsewhere.
*/
if (tp->t_line == SLIPDISC)
com->hotchar = 0xc0;
else if (tp->t_line == PPPDISC)
com->hotchar = 0x7e;
else
com->hotchar = 0;
buf = ibuf;
disable_intr();
incc = com->iptr - buf;
com_events -= incc;
if (ibuf == com->ibuf1)
ibuf = com->ibuf2;
else
ibuf = com->ibuf1;
com->ibufend = ibuf + RS_IBUFSIZE;
com->ihighwater = ibuf + RS_IHIGHWATER;
com->iptr = ibuf;
/*
* There is now room for another low-level buffer full
* of input, so enable RTS if it is now disabled and
* there is room in the high-level buffer.
*/
/*
* XXX this used not to look at CS_RTS_IFLOW. The
* change is to allow full control of MCR_RTS via
* ioctls after turning CS_RTS_IFLOW off. Check
* for races. We shouldn't allow the ioctls while
* CS_RTS_IFLOW is on.
*/
if ((com->state & CS_RTS_IFLOW)
&& !(com->mcr_image & MCR_RTS)
&& !(tp->t_state & TS_RTS_IFLOW))
outb(com->modem_ctl_port,
com->mcr_image |= MCR_RTS);
enable_intr();
com->ibuf = ibuf;
}
if (com->state & CS_CHECKMSR) {
u_char delta_modem_status;
disable_intr();
delta_modem_status = com->last_modem_status
^ com->prev_modem_status;
com->prev_modem_status = com->last_modem_status;
com_events -= LOTS_OF_EVENTS;
com->state &= ~CS_CHECKMSR;
enable_intr();
if (delta_modem_status & MSR_DCD)
(*linesw[tp->t_line].l_modem)
(tp, com->prev_modem_status & MSR_DCD);
}
/* XXX */
if (TRUE) {
u_int delta;
int errnum;
u_long total;
for (errnum = 0; errnum < CE_NTYPES; ++errnum) {
disable_intr();
delta = com->delta_error_counts[errnum];
com->delta_error_counts[errnum] = 0;
enable_intr();
if (delta == 0 || !(tp->t_state & TS_ISOPEN))
continue;
total = com->error_counts[errnum] += delta;
log(LOG_ERR,
"sio%d: %u more %s%s (total %lu)\n",
unit, delta, error_desc[errnum],
delta == 1 ? "" : "s", total);
#if 0
if (errnum == CE_OVERRUN && com->hasfifo
&& com->ftl > FIFO_TRIGGER_1) {
static u_char ftl_in_bytes[] =
{ 1, 4, 8, 14, };
com->ftl_init = FIFO_TRIGGER_8;
#define FIFO_TRIGGER_DELTA FIFO_TRIGGER_4
com->ftl_max =
com->ftl -= FIFO_TRIGGER_DELTA;
outb(com->iobase + com_fifo,
FIFO_ENABLE | com->ftl);
log(LOG_DEBUG,
"sio%d: reduced fifo trigger level to %d\n",
unit,
ftl_in_bytes[com->ftl
/ FIFO_TRIGGER_DELTA]);
}
#endif
}
}
if (com->state & CS_ODONE) {
comflush(com);
/* XXX - why isn't the table used for t_line == 0? */
if (tp->t_line != 0)
(*linesw[tp->t_line].l_start)(tp);
else
comstart(tp);
}
if (incc <= 0 || !(tp->t_state & TS_ISOPEN))
continue;
if (com->state & CS_RTS_IFLOW
&& tp->t_rawq.c_cc + incc >= RB_I_HIGH_WATER
&& !(tp->t_state & TS_RTS_IFLOW)
/*
* XXX - need RTS flow control for all line disciplines.
* Only have it in standard one now.
*/
&& linesw[tp->t_line].l_rint == ttyinput) {
tp->t_state |= TS_RTS_IFLOW;
ttstart(tp);
}
/*
* Avoid the grotesquely inefficient lineswitch routine
* (ttyinput) in "raw" mode. It usually takes about 450
* instructions (that's without canonical processing or echo!).
* slinput is reasonably fast (usually 40 instructions plus
* call overhead).
*/
if (!(tp->t_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP
| IXOFF | IXON))
&& !(tp->t_lflag & (ECHO | ECHONL | ICANON | IEXTEN | ISIG
| PENDIN))
&& !(tp->t_state & (TS_CNTTB | TS_LNCH))
&& linesw[tp->t_line].l_rint == ttyinput) {
tk_nin += incc;
tk_rawcc += incc;
tp->t_rawcc += incc;
com->delta_error_counts[CE_TTY_BUF_OVERFLOW]
+= b_to_q((char *)buf, incc, &tp->t_rawq);
ttwakeup(tp);
if (tp->t_state & TS_TTSTOP
&& (tp->t_iflag & IXANY
|| tp->t_cc[VSTART] == tp->t_cc[VSTOP])) {
tp->t_state &= ~TS_TTSTOP;
tp->t_lflag &= ~FLUSHO;
ttstart(tp);
}
} else {
do {
u_char line_status;
int recv_data;
line_status = (u_char) buf[CE_INPUT_OFFSET];
recv_data = (u_char) *buf++;
if (line_status
& (LSR_BI | LSR_FE | LSR_OE | LSR_PE)) {
if (line_status & LSR_BI)
recv_data |= TTY_BI;
if (line_status & LSR_FE)
recv_data |= TTY_FE;
if (line_status & LSR_OE)
recv_data |= TTY_OE;
if (line_status & LSR_PE)
recv_data |= TTY_PE;
}
(*linesw[tp->t_line].l_rint)(recv_data, tp);
} while (--incc > 0);
}
if (com_events == 0)
break;
}
if (com_events >= LOTS_OF_EVENTS)
goto repeat;
}
static int
comparam(tp, t)
struct tty *tp;
struct termios *t;
{
u_int cfcr;
int cflag;
struct com_s *com;
int divisor;
int error;
Port_t iobase;
int s;
int unit;
/* check requested parameters */
divisor = ttspeedtab(t->c_ospeed, comspeedtab);
if (t->c_ispeed == 0)
t->c_ispeed = t->c_ospeed;
if (divisor < 0 || divisor > 0 && t->c_ispeed != t->c_ospeed)
return (EINVAL);
/* parameters are OK, convert them to the com struct and the device */
unit = DEV_TO_UNIT(tp->t_dev);
com = com_addr(unit);
iobase = com->iobase;
s = spltty();
if (divisor == 0)
commctl(com, MCR_DTR, DMBIC); /* hang up line */
else
commctl(com, MCR_DTR, DMBIS);
cflag = t->c_cflag;
switch (cflag & CSIZE) {
case CS5:
cfcr = CFCR_5BITS;
break;
case CS6:
cfcr = CFCR_6BITS;
break;
case CS7:
cfcr = CFCR_7BITS;
break;
default:
cfcr = CFCR_8BITS;
break;
}
if (cflag & PARENB) {
cfcr |= CFCR_PENAB;
if (!(cflag & PARODD))
cfcr |= CFCR_PEVEN;
}
if (cflag & CSTOPB)
cfcr |= CFCR_STOPB;
if (com->hasfifo) {
/*
* Use a fifo trigger level low enough so that the input
* latency from the fifo is less than about 16 msec and
* the total latency is less than about 30 msec. These
* latencies are reasonable for humans. Serial comms
* protocols shouldn't expect anything better since modem
* latencies are larger.
*/
com->ftl = t->c_ospeed <= 4800
? FIFO_TRIGGER_1 : FIFO_TRIGGER_14;
if (com->ftl > com->ftl_max)
com->ftl = com->ftl_max;
outb(iobase + com_fifo, FIFO_ENABLE | com->ftl);
}
/*
* Some UARTs lock up if the divisor latch registers are selected
* while the UART is doing output (they refuse to transmit anything
* more until given a hard reset). Fix this by stopping filling
* the device buffers and waiting for them to drain. Reading the
* line status port outside of siointr1() might lose some receiver
* error bits, but that is acceptable here.
*/
disable_intr();
retry:
com->state &= ~CS_TTGO;
enable_intr();
while ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY))
!= (LSR_TSRE | LSR_TXRDY)) {
error = ttysleep(tp, TSA_OCOMPLETE(tp), TTIPRI | PCATCH,
"siotx", hz / 100);
if (error != 0 && error != EAGAIN) {
if (!(tp->t_state & TS_TTSTOP)) {
disable_intr();
com->state |= CS_TTGO;
enable_intr();
}
splx(s);
return (error);
}
}
disable_intr(); /* very important while com_data is hidden */
/*
* XXX - clearing CS_TTGO is not sufficient to stop further output,
* because siopoll() calls comstart() which usually sets it again
* because TS_TTSTOP is clear. Setting TS_TTSTOP would not be
* sufficient, for similar reasons.
*/
if ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY))
!= (LSR_TSRE | LSR_TXRDY))
goto retry;
if (divisor != 0) {
outb(iobase + com_cfcr, cfcr | CFCR_DLAB);
outb(iobase + com_dlbl, divisor & 0xFF);
outb(iobase + com_dlbh, (u_int) divisor >> 8);
}
outb(iobase + com_cfcr, com->cfcr_image = cfcr);
if (!(tp->t_state & TS_TTSTOP))
com->state |= CS_TTGO;
if (cflag & CRTS_IFLOW)
com->state |= CS_RTS_IFLOW; /* XXX - secondary changes? */
else
com->state &= ~CS_RTS_IFLOW;
/*
* Set up state to handle output flow control.
* XXX - worth handling MDMBUF (DCD) flow control at the lowest level?
* Now has 10+ msec latency, while CTS flow has 50- usec latency.
*/
com->state &= ~CS_CTS_OFLOW;
com->state |= CS_ODEVREADY;
if (cflag & CCTS_OFLOW) {
com->state |= CS_CTS_OFLOW;
if (!(com->last_modem_status & MSR_CTS))
com->state &= ~CS_ODEVREADY;
}
/*
* Recover from fiddling with CS_TTGO. We used to call siointr1()
* unconditionally, but that defeated the careful discarding of
* stale input in sioopen().
*/
if (com->state >= (CS_BUSY | CS_TTGO))
siointr1(com);
enable_intr();
splx(s);
return (0);
}
static void
comstart(tp)
struct tty *tp;
{
struct com_s *com;
int s;
int unit;
unit = DEV_TO_UNIT(tp->t_dev);
com = com_addr(unit);
s = spltty();
disable_intr();
if (tp->t_state & TS_TTSTOP)
com->state &= ~CS_TTGO;
else
com->state |= CS_TTGO;
if (tp->t_state & TS_RTS_IFLOW) {
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
} else {
/*
* XXX don't raise MCR_RTS if CTS_RTS_IFLOW is off. Set it
* appropriately in comparam() if RTS-flow is being changed.
* Check for races.
*/
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater)
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
}
enable_intr();
if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP))
goto out;
#if 0 /* XXX TK2.0 */
if (tp->t_state & (TS_SO_OCOMPLETE | TS_SO_OLOWAT) || tp->t_wsel)
ttwwakeup(tp);
#else
if (tp->t_outq.c_cc <= tp->t_lowat) {
if (tp->t_state & TS_ASLEEP) {
tp->t_state &= ~TS_ASLEEP;
wakeup(TSA_OLOWAT(tp));
}
selwakeup(&tp->t_wsel);
}
#endif
if (com->state & CS_BUSY) {
disable_intr();
siointr1(com);
enable_intr();
} else if (tp->t_outq.c_cc != 0) {
u_int ocount;
tp->t_state |= TS_BUSY;
ocount = q_to_b(&tp->t_outq, com->obuf, sizeof com->obuf);
disable_intr();
com->obufend = (com->optr = com->obuf) + ocount;
com->state |= CS_BUSY;
siointr1(com); /* fake interrupt to start output */
enable_intr();
}
out:
splx(s);
}
void
siostop(tp, rw)
struct tty *tp;
int rw;
{
struct com_s *com;
com = com_addr(DEV_TO_UNIT(tp->t_dev));
if (rw & FWRITE)
comflush(com);
disable_intr();
if (rw & FREAD) {
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
}
if (tp->t_state & TS_TTSTOP)
com->state &= ~CS_TTGO;
else
com->state |= CS_TTGO;
enable_intr();
}
int
sioselect(dev, rw, p)
dev_t dev;
int rw;
struct proc *p;
{
if (minor(dev) & CONTROL_MASK)
return (ENODEV);
return (ttselect(dev & ~MINOR_MAGIC_MASK, rw, p));
}
static void
commctl(com, bits, how)
struct com_s *com;
int bits;
int how;
{
disable_intr();
switch (how) {
case DMSET:
outb(com->modem_ctl_port,
com->mcr_image = bits | (com->mcr_image & MCR_IENABLE));
break;
case DMBIS:
outb(com->modem_ctl_port, com->mcr_image |= bits);
break;
case DMBIC:
outb(com->modem_ctl_port, com->mcr_image &= ~bits);
break;
}
enable_intr();
}
static void
comwakeup(chan)
void *chan;
{
int unit;
timeout(comwakeup, (caddr_t)NULL, hz > 200 ? hz / 200 : 1);
if (com_events != 0) {
int s;
s = splsofttty();
siopoll();
splx(s);
}
/* recover from lost output interrupts */
/* poll any lines that don't use interrupts */
for (unit = 0; unit < NSIO; ++unit) {
struct com_s *com;
com = com_addr(unit);
if (com != NULL
&& (com->state >= (CS_BUSY | CS_TTGO) || com->poll)) {
disable_intr();
siointr1(com);
enable_intr();
}
}
}
/*
* Following are all routines needed for SIO to act as console
*/
#include "i386/i386/cons.h"
struct siocnstate {
u_char dlbl;
u_char dlbh;
u_char ier;
u_char cfcr;
u_char mcr;
};
static Port_t siocniobase;
static void siocnclose __P((struct siocnstate *sp));
static void siocnopen __P((struct siocnstate *sp));
static void siocntxwait __P((void));
static void
siocntxwait()
{
int timo;
/*
* Wait for any pending transmission to finish. Required to avoid
* the UART lockup bug when the speed is changed, and for normal
* transmits.
*/
timo = 100000;
while ((inb(siocniobase + com_lsr) & (LSR_TSRE | LSR_TXRDY))
!= (LSR_TSRE | LSR_TXRDY) && --timo != 0)
;
}
static void
siocnopen(sp)
struct siocnstate *sp;
{
int divisor;
Port_t iobase;
/*
* Save all the device control registers except the fifo register
* and set our default ones (cs8 -parenb speed=comdefaultrate).
* We can't save the fifo register since it is read-only.
*/
iobase = siocniobase;
sp->ier = inb(iobase + com_ier);
outb(iobase + com_ier, 0); /* spltty() doesn't stop siointr() */
siocntxwait();
sp->cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB);
sp->dlbl = inb(iobase + com_dlbl);
sp->dlbh = inb(iobase + com_dlbh);
divisor = ttspeedtab(comdefaultrate, comspeedtab);
outb(iobase + com_dlbl, divisor & 0xFF);
outb(iobase + com_dlbh, (u_int) divisor >> 8);
outb(iobase + com_cfcr, CFCR_8BITS);
sp->mcr = inb(iobase + com_mcr);
/*
* We don't want interrupts, but must be careful not to "disable"
* them by clearing the MCR_IENABLE bit, since that might cause
* an interrupt by floating the IRQ line.
*/
outb(iobase + com_mcr, (sp->mcr & MCR_IENABLE) | MCR_DTR | MCR_RTS);
}
static void
siocnclose(sp)
struct siocnstate *sp;
{
Port_t iobase;
/*
* Restore the device control registers.
*/
siocntxwait();
iobase = siocniobase;
outb(iobase + com_cfcr, CFCR_DLAB);
outb(iobase + com_dlbl, sp->dlbl);
outb(iobase + com_dlbh, sp->dlbh);
outb(iobase + com_cfcr, sp->cfcr);
/*
* XXX damp oscillations of MCR_DTR and MCR_RTS by not restoring them.
*/
outb(iobase + com_mcr, sp->mcr | MCR_DTR | MCR_RTS);
outb(iobase + com_ier, sp->ier);
}
void
siocnprobe(cp)
struct consdev *cp;
{
int unit;
/* locate the major number */
/* XXX - should be elsewhere since KGDB uses it */
for (commajor = 0; commajor < nchrdev; commajor++)
if (cdevsw[commajor].d_open == sioopen)
break;
/* XXX: ick */
unit = DEV_TO_UNIT(CONUNIT);
siocniobase = CONADDR;
/* make sure hardware exists? XXX */
/* initialize required fields */
cp->cn_dev = makedev(commajor, unit);
#ifdef COMCONSOLE
cp->cn_pri = CN_REMOTE; /* Force a serial port console */
#else
cp->cn_pri = CN_NORMAL;
#endif
}
void
siocninit(cp)
struct consdev *cp;
{
/*
* XXX can delete more comconsole stuff now that i/o routines are
* fairly reentrant.
*/
comconsole = DEV_TO_UNIT(cp->cn_dev);
}
int
siocncheckc(dev)
dev_t dev;
{
int c=0;
Port_t iobase;
int s;
struct siocnstate sp;
iobase = siocniobase;
s = spltty();
siocnopen(&sp);
if (inb(iobase + com_lsr) & LSR_RXRDY)
c = inb(iobase + com_data);
siocnclose(&sp);
splx(s);
return (c);
}
int
siocngetc(dev)
dev_t dev;
{
int c;
Port_t iobase;
int s;
struct siocnstate sp;
iobase = siocniobase;
s = spltty();
siocnopen(&sp);
while (!(inb(iobase + com_lsr) & LSR_RXRDY))
;
c = inb(iobase + com_data);
siocnclose(&sp);
splx(s);
return (c);
}
void
siocnputc(dev, c)
dev_t dev;
int c;
{
int s;
struct siocnstate sp;
s = spltty();
siocnopen(&sp);
siocntxwait();
outb(siocniobase + com_data, c);
siocnclose(&sp);
splx(s);
}
#ifdef DSI_SOFT_MODEM
/*
* The magic code to download microcode to a "Connection 14.4+Fax"
* modem from Digicom Systems Inc. Very magic.
*/
#define DSI_ERROR(str) { ptr = str; goto error; }
static int
LoadSoftModem(int unit, int base_io, u_long size, u_char *ptr)
{
int int_c,int_k;
int data_0188, data_0187;
/*
* First see if it is a DSI SoftModem
*/
if(!((inb(base_io+7) ^ inb(base_io+7) & 0x80)))
return ENODEV;
data_0188 = inb(base_io+4);
data_0187 = inb(base_io+3);
outb(base_io+3,0x80);
outb(base_io+4,0x0C);
outb(base_io+0,0x31);
outb(base_io+1,0x8C);
outb(base_io+7,0x10);
outb(base_io+7,0x19);
if(0x18 != (inb(base_io+7) & 0x1A))
DSI_ERROR("dsp bus not granted");
if(0x01 != (inb(base_io+7) & 0x01)) {
outb(base_io+7,0x18);
outb(base_io+7,0x19);
if(0x01 != (inb(base_io+7) & 0x01))
DSI_ERROR("program mem not granted");
}
int_c = 0;
while(1) {
if(int_c >= 7 || size <= 0x1800)
break;
for(int_k = 0 ; int_k < 0x800; int_k++) {
outb(base_io+0,*ptr++);
outb(base_io+1,*ptr++);
outb(base_io+2,*ptr++);
}
size -= 0x1800;
int_c++;
}
if(size > 0x1800) {
outb(base_io+7,0x18);
outb(base_io+7,0x19);
if(0x00 != (inb(base_io+7) & 0x01))
DSI_ERROR("program data not granted");
for(int_k = 0 ; int_k < 0x800; int_k++) {
outb(base_io+1,*ptr++);
outb(base_io+2,0);
outb(base_io+1,*ptr++);
outb(base_io+2,*ptr++);
}
size -= 0x1800;
while(size > 0x1800) {
for(int_k = 0 ; int_k < 0xC00; int_k++) {
outb(base_io+1,*ptr++);
outb(base_io+2,*ptr++);
}
size -= 0x1800;
}
if(size < 0x1800) {
for(int_k=0;int_k<size/2;int_k++) {
outb(base_io+1,*ptr++);
outb(base_io+2,*ptr++);
}
}
} else if (size > 0) {
if(int_c == 7) {
outb(base_io+7,0x18);
outb(base_io+7,0x19);
if(0x00 != (inb(base_io+7) & 0x01))
DSI_ERROR("program data not granted");
for(int_k = 0 ; int_k < size/3; int_k++) {
outb(base_io+1,*ptr++);
outb(base_io+2,0);
outb(base_io+1,*ptr++);
outb(base_io+2,*ptr++);
}
} else {
for(int_k = 0 ; int_k < size/3; int_k++) {
outb(base_io+0,*ptr++);
outb(base_io+1,*ptr++);
outb(base_io+2,*ptr++);
}
}
}
outb(base_io+7,0x11);
outb(base_io+7,3);
outb(base_io+4,data_0188 & 0xfb);
outb(base_io+3,data_0187);
return 0;
error:
printf("sio%d: DSI SoftModem microcode load failed: <%s>\n",ptr);
outb(base_io+7,0x00); \
outb(base_io+3,data_0187); \
outb(base_io+4,data_0188); \
return EIO;
}
#endif /* DSI_SOFT_MODEM */
#endif /* NSIO > 0 */
Reference in New Issue View Git Blame Copy Permalink