freebsd-nq/sys/conf/Makefile.pc98
KATO Takenori 4c024bbdf8 Improved CPU identification and initialization routines. This
supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.

If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode.  This can be disabled by kernel configuration
options.

Reviewed by:	Bruce Evans <bde@freebsd.org> and
            	Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00

195 lines
5.5 KiB
Makefile

# Makefile for FreeBSD(98) after:
#
# Makefile.i386 -- with config changes.
# Copyright 1990 W. Jolitz
# from: @(#)Makefile.i386 7.1 5/10/91
# $Id: Makefile.pc98,v 1.11 1997/02/22 09:43:21 peter Exp $
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
# /sys/i386/conf/``machineid''
# after which you should do
# config machineid
# Generic makefile changes should be made in
# /sys/i386/conf/Makefile.i386
# after which config should be rerun for all machines.
#
CC?= cc
CPP?= cpp
LD?= /usr/bin/ld
.if exists(./@/.)
S= ./@
.else
S= ../..
.endif
PC98= ${S}/pc98
I386= ${S}/i386
COPTFLAGS?=-O
INCLUDES= -nostdinc -I- -I. -I$S
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS= ${INCLUDES} ${IDENT} -DKERNEL
CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
LOAD_ADDRESS?= F0100000
.if defined(PROF)
PROF+= -malign-functions=4
.if ${PROFLEVEL} >= 2
IDENT+= -DGPROF4 -DGUPROF
PROF+= -mprofiler-epilogue
.endif
.endif
NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
NORMAL_S= ${CC} -c -x assembler-with-cpp -DLOCORE ${COPTS} $<
DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
DRIVER_S= ${CC} -c -x assembler-with-cpp -DLOCORE ${COPTS} $<
PROFILE_C= ${CC} -c ${CFLAGS} ${PARAM} $<
SYSTEM_CFILES= ioconf.c param.c vnode_if.c config.c
SYSTEM_SFILES= ${I386}/i386/locore.s
SYSTEM_OBJS= locore.o vnode_if.o ${OBJS} ioconf.o param.o config.o
SYSTEM_DEP= Makefile symbols.exclude symbols.sort ${SYSTEM_OBJS}
SYSTEM_LD_HEAD= @echo loading $@; rm -f $@
SYSTEM_LD= @${LD} -Bstatic -Z -T ${LOAD_ADDRESS} -o $@ -X ${SYSTEM_OBJS} vers.o
.if ${CFLAGS:M-g} == ""
SYMORDER_EXCLUDE=-x symbols.exclude
.endif
SYSTEM_LD_TAIL= @echo rearranging symbols; \
symorder -m ${SYMORDER_EXCLUDE} symbols.sort $@; \
size $@; chmod 755 $@
%BEFORE_DEPEND
%OBJS
%CFILES
%SFILES
%LOAD
%CLEAN
clean:
rm -f *.o *.s eddep errs genassym kernel linterrs \
makelinks param.c symbols.exclude symbols.sort tags \
vers.c vnode_if.c vnode_if.h ${CLEAN}
#lint: /tmp param.c
# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} \
# ${I386}/i386/Locore.c ${CFILES} ioconf.c param.c | \
# grep -v 'struct/union .* never defined' | \
# grep -v 'possible pointer alignment problem'
symbols.exclude: Makefile
echo "gcc2_compiled." >symbols.exclude
echo "___gnu_compiled_c" >>symbols.exclude
symbols.sort: ${I386}/i386/symbols.raw
grep -v '^#' ${I386}/i386/symbols.raw \
| sed 's/^ //' | sort -u > symbols.sort
locore.o: ${I386}/i386/locore.s assym.s
${NORMAL_S}
# everything potentially depends on the Makefile since everything potentially
# depends on the options. Some things are more dependent on the Makefile for
# historical reasons.
machdep.o: Makefile
# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile
# XXX - may no longer be needed
locore.o: Makefile
# depends on KDB (cons.o also depends on GENERIC)
trap.o cons.o: Makefile
# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s
assym.s: genassym
./genassym >assym.s
# Some of the defines that genassym outputs may well depend on the
# value of kernel options.
genassym.o: ${I386}/i386/genassym.c Makefile
rm -f ./machine ; ln -s ${I386}/include ./machine
${CC} -c ${CFLAGS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
genassym: genassym.o
${CC} ${CFLAGS} ${PARAM} genassym.o -o $@
# XXX this assumes that the options for NORMAL_C* and DRIVER_C* are identical.
depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND}
rm -f .newdep
mkdep -a -f .newdep ${COPTS} ${CFILES} ${SYSTEM_CFILES}
mkdep -a -f .newdep ${COPTS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
MKDEP_CPP="${CPP}" ; export MKDEP_CPP ; \
mkdep -a -f .newdep -DLOCORE ${COPTS} ${SFILES} ${SYSTEM_SFILES}
rm -f .depend
mv -f .newdep .depend
links:
egrep '#if' ${CFILES:Nswapkernel.c} | sed -f $S/conf/defines | \
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
echo ${CFILES:Nswapkernel.c} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks && rm -f dontlink
tags:
@echo "see $S/kern/Makefile for tags"
install:
@if [ ! -f kernel ] ; then \
echo "You must first build your kernel before trying to install." ; \
exit 1 ; \
fi
chflags noschg /kernel
mv /kernel /kernel.old
if [ `/usr/sbin/sysctl -n kern.bootfile` = /kernel ] ; then \
/usr/sbin/sysctl -w kern.bootfile=/kernel.old ; \
mv -f /var/db/kvm_kernel.db /var/db/kvm_kernel.old.db ; \
fi
install -c -m 555 -o root -g wheel -fschg kernel /
ioconf.o: ioconf.c $S/sys/param.h $S/sys/buf.h \
${I386}/isa/isa_device.h ${PC98}/pc98/pc98.h ${I386}/isa/icu.h
${CC} -c ${CFLAGS} ioconf.c
param.c: $S/conf/param.c
-rm -f param.c
cp $S/conf/param.c .
param.o: param.c Makefile
${CC} -c ${CFLAGS} ${PARAM} param.c
vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
${CC} ${CFLAGS} -c vers.c
vnode_if.c: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
.include <bsd.kern.mk>
%RULES
# DO NOT DELETE THIS LINE -- make depend uses it