freebsd-nq/sys/sparc64/sbus/sbus.c
Thomas Moestl f42d907165 When multiple IOMMUs are present in a system, use a single TSB for all
of them, and couple them by always performing all operations on all
present IOMMUs. This is required because with the current API there
is no way to determine on which bus a busdma operation is performed.

While being there, clean up the iommu code a bit.

This should be a step in the direction of allow some of larger machines
to work; tests have shown that there still seem to be problems left.
2002-07-16 18:17:03 +00:00

971 lines
30 KiB
C

/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1999 Eduardo Horvath
* Copyright (c) 2002 by Thomas Moestl <tmm@FreeBSD.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)sbus.c 8.1 (Berkeley) 6/11/93
* from: NetBSD: sbus.c,v 1.46 2001/10/07 20:30:41 eeh Exp
*
* $FreeBSD$
*/
/*
* Sbus support.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/reboot.h>
#include <ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/iommureg.h>
#include <machine/bus_common.h>
#include <machine/frame.h>
#include <machine/intr_machdep.h>
#include <machine/nexusvar.h>
#include <machine/ofw_upa.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/iommuvar.h>
#include <sparc64/sbus/ofw_sbus.h>
#include <sparc64/sbus/sbusreg.h>
#include <sparc64/sbus/sbusvar.h>
#ifdef DEBUG
#define SDB_DVMA 0x1
#define SDB_INTR 0x2
int sbus_debug = 0;
#define DPRINTF(l, s) do { if (sbus_debug & l) printf s; } while (0)
#else
#define DPRINTF(l, s)
#endif
struct sbus_devinfo {
int sdi_burstsz;
char *sdi_compat;
char *sdi_name; /* PROM name */
phandle_t sdi_node; /* PROM node */
int sdi_slot;
char *sdi_type; /* PROM name */
struct resource_list sdi_rl;
};
/* Range descriptor, allocated for each sc_range. */
struct sbus_rd {
bus_addr_t rd_poffset;
bus_addr_t rd_pend;
int rd_slot;
bus_addr_t rd_coffset;
bus_addr_t rd_cend;
struct rman rd_rman;
bus_space_handle_t rd_bushandle;
struct resource *rd_res;
};
struct sbus_softc {
bus_space_tag_t sc_bustag;
bus_space_handle_t sc_bushandle;
bus_dma_tag_t sc_dmatag;
bus_dma_tag_t sc_cdmatag;
bus_space_tag_t sc_cbustag;
int sc_clockfreq; /* clock frequency (in Hz) */
struct upa_regs *sc_reg;
int sc_nreg;
int sc_nrange;
struct sbus_rd *sc_rd;
int sc_burst; /* burst transfer sizes supported */
int *sc_intr_compat;/* `intr' property to sbus compat */
struct resource *sc_sysio_res;
int sc_ign; /* Interrupt group number for this sysio */
struct iommu_state sc_is; /* IOMMU state, see iommureg.h */
struct resource *sc_ot_ires;
void *sc_ot_ihand;
struct resource *sc_pf_ires;
void *sc_pf_ihand;
};
struct sbus_clr {
struct sbus_softc *scl_sc;
bus_addr_t scl_clr; /* clear register */
driver_intr_t *scl_handler; /* handler to call */
void *scl_arg; /* argument for the handler */
void *scl_cookie; /* interrupt cookie of parent bus */
};
#define SYSIO_READ8(sc, off) \
bus_space_read_8((sc)->sc_bustag, (sc)->sc_bushandle, (off))
#define SYSIO_WRITE8(sc, off, v) \
bus_space_write_8((sc)->sc_bustag, (sc)->sc_bushandle, (off), (v))
static int sbus_probe(device_t dev);
static int sbus_print_child(device_t dev, device_t child);
static void sbus_probe_nomatch(device_t dev, device_t child);
static int sbus_read_ivar(device_t, device_t, int, u_long *);
static struct resource_list *sbus_get_resource_list(device_t dev,
device_t child);
static int sbus_setup_intr(device_t, device_t, struct resource *, int,
driver_intr_t *, void *, void **);
static int sbus_teardown_intr(device_t, device_t, struct resource *, void *);
static struct resource *sbus_alloc_resource(device_t, device_t, int, int *,
u_long, u_long, u_long, u_int);
static int sbus_activate_resource(device_t, device_t, int, int,
struct resource *);
static int sbus_deactivate_resource(device_t, device_t, int, int,
struct resource *);
static int sbus_release_resource(device_t, device_t, int, int,
struct resource *);
static struct sbus_devinfo * sbus_setup_dinfo(struct sbus_softc *sc,
phandle_t node, char *name);
static void sbus_destroy_dinfo(struct sbus_devinfo *dinfo);
static void sbus_intr_stub(void *);
static bus_space_tag_t sbus_alloc_bustag(struct sbus_softc *);
static void sbus_overtemp(void *);
static void sbus_pwrfail(void *);
/*
* DVMA routines
*/
static int sbus_dmamap_create(bus_dma_tag_t, bus_dma_tag_t, int,
bus_dmamap_t *);
static int sbus_dmamap_destroy(bus_dma_tag_t, bus_dma_tag_t, bus_dmamap_t);
static int sbus_dmamap_load(bus_dma_tag_t, bus_dma_tag_t, bus_dmamap_t, void *,
bus_size_t, bus_dmamap_callback_t *, void *, int);
static void sbus_dmamap_unload(bus_dma_tag_t, bus_dma_tag_t, bus_dmamap_t);
static void sbus_dmamap_sync(bus_dma_tag_t, bus_dma_tag_t, bus_dmamap_t,
bus_dmasync_op_t);
static int sbus_dmamem_alloc(bus_dma_tag_t, bus_dma_tag_t, void **, int,
bus_dmamap_t *);
static void sbus_dmamem_free(bus_dma_tag_t, bus_dma_tag_t, void *,
bus_dmamap_t);
static device_method_t sbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sbus_probe),
DEVMETHOD(device_attach, bus_generic_attach),
/* Bus interface */
DEVMETHOD(bus_print_child, sbus_print_child),
DEVMETHOD(bus_probe_nomatch, sbus_probe_nomatch),
DEVMETHOD(bus_read_ivar, sbus_read_ivar),
DEVMETHOD(bus_setup_intr, sbus_setup_intr),
DEVMETHOD(bus_teardown_intr, sbus_teardown_intr),
DEVMETHOD(bus_alloc_resource, sbus_alloc_resource),
DEVMETHOD(bus_activate_resource, sbus_activate_resource),
DEVMETHOD(bus_deactivate_resource, sbus_deactivate_resource),
DEVMETHOD(bus_release_resource, sbus_release_resource),
DEVMETHOD(bus_get_resource_list, sbus_get_resource_list),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
{ 0, 0 }
};
static driver_t sbus_driver = {
"sbus",
sbus_methods,
sizeof(struct sbus_softc),
};
static devclass_t sbus_devclass;
DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, 0, 0);
/*
* This value is or'ed into the attach args' interrupt level cookie
* if the interrupt level comes from an `intr' property, i.e. it is
* not an Sbus interrupt level.
*/
#define SBUS_INTR_COMPAT 0x80000000
#define SBUS_MEM_SIZE 0x100000000
#define OFW_SBUS_TYPE "sbus"
#define OFW_SBUS_NAME "sbus"
static int
sbus_probe(device_t dev)
{
struct sbus_softc *sc = device_get_softc(dev);
struct sbus_devinfo *sdi;
struct sbus_ranges *range;
struct resource *res;
device_t cdev;
bus_addr_t phys;
bus_size_t size;
char *name, *cname, *t;
phandle_t child, node = nexus_get_node(dev);
u_int64_t mr;
int intr, clock, rid, vec, i;
t = nexus_get_device_type(dev);
if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
strcmp(nexus_get_name(dev), OFW_SBUS_NAME) != 0)
return (ENXIO);
device_set_desc(dev, "U2S UPA-SBus bridge");
if ((sc->sc_nreg = OF_getprop_alloc(node, "reg", sizeof(*sc->sc_reg),
(void **)&sc->sc_reg)) == -1) {
panic("sbus_probe: error getting reg property");
}
if (sc->sc_nreg < 1)
panic("sbus_probe: bogus properties");
phys = UPA_REG_PHYS(&sc->sc_reg[0]);
size = UPA_REG_SIZE(&sc->sc_reg[0]);
rid = 0;
sc->sc_sysio_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE);
if (sc->sc_sysio_res == NULL ||
rman_get_start(sc->sc_sysio_res) != phys)
panic("sbus_probe: can't allocate device memory");
sc->sc_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_sysio_res);
if (OF_getprop(node, "interrupts", &intr, sizeof(intr)) == -1)
panic("sbus_probe: cannot get IGN");
sc->sc_ign = intr & INTMAP_IGN; /* Find interrupt group no */
sc->sc_cbustag = sbus_alloc_bustag(sc);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &clock, sizeof(clock)) == -1)
clock = 25000000;
sc->sc_clockfreq = clock;
clock /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", clock / 1000, clock % 1000);
sc->sc_dmatag = nexus_get_dmatag(dev);
if (bus_dma_tag_create(sc->sc_dmatag, 8, 1, 0, 0x3ffffffff, NULL, NULL,
0x3ffffffff, 0xff, 0xffffffff, 0, &sc->sc_cdmatag) != 0)
panic("bus_dma_tag_create failed");
/* Customize the tag */
sc->sc_cdmatag->cookie = sc;
sc->sc_cdmatag->dmamap_create = sbus_dmamap_create;
sc->sc_cdmatag->dmamap_destroy = sbus_dmamap_destroy;
sc->sc_cdmatag->dmamap_load = sbus_dmamap_load;
sc->sc_cdmatag->dmamap_unload = sbus_dmamap_unload;
sc->sc_cdmatag->dmamap_sync = sbus_dmamap_sync;
sc->sc_cdmatag->dmamem_alloc = sbus_dmamem_alloc;
sc->sc_cdmatag->dmamem_free = sbus_dmamem_free;
/* XXX: register as root dma tag (kluge). */
sparc64_root_dma_tag = sc->sc_cdmatag;
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property",
device_get_name(dev));
}
sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
M_DEVBUF, M_NOWAIT);
if (sc->sc_rd == NULL)
panic("sbus_probe: could not allocate rmans");
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
rid = 0;
if ((res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE)) == NULL)
panic("sbus_probe: could not allocate decoded range");
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("psycho_probe: failed to set up memory rman");
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
* XXX: is the default correct?
*/
if (OF_getprop(node, "burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst = SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_bustag = sc->sc_bustag;
sc->sc_is.is_bushandle = sc->sc_bushandle;
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = NULL;
/* give us a nice name.. */
name = (char *)malloc(32, M_DEVBUF, M_NOWAIT);
if (name == 0)
panic("sbus_probe: couldn't malloc iommu name");
snprintf(name, 32, "%s dvma", device_get_name(dev));
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(name, &sc->sc_is, 0, -1, 1);
/* Enable the over-temperature and power-fail intrrupts. */
rid = 0;
mr = SYSIO_READ8(sc, SBR_THERM_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_ot_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get temperature interrupt");
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_overtemp, sc, &sc->sc_ot_ihand);
SYSIO_WRITE8(sc, SBR_THERM_INT_MAP, mr | INTMAP_V);
rid = 0;
mr = SYSIO_READ8(sc, SBR_POWER_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_pf_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get power fail interrupt");
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_pwrfail, sc, &sc->sc_pf_ihand);
SYSIO_WRITE8(sc, SBR_POWER_INT_MAP, mr | INTMAP_V);
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle, SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
* `specials' is an array of device names that are treated
* specially:
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((OF_getprop_alloc(child, "name", 1, (void **)&cname)) == -1)
continue;
if ((sdi = sbus_setup_dinfo(sc, child, cname)) == NULL) {
device_printf(dev, "<%s>: incomplete\n", cname);
free(cname, M_OFWPROP);
continue;
}
if ((cdev = device_add_child(dev, NULL, -1)) == NULL)
panic("sbus_probe: device_add_child failed");
device_set_ivars(cdev, sdi);
}
return (0);
}
static struct sbus_devinfo *
sbus_setup_dinfo(struct sbus_softc *sc, phandle_t node, char *name)
{
struct sbus_devinfo *sdi;
struct sbus_regs *reg;
u_int32_t base, iv, *intr;
int i, nreg, nintr, slot, rslot;
sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK);
if (sdi == NULL)
return (NULL);
resource_list_init(&sdi->sdi_rl);
sdi->sdi_name = name;
sdi->sdi_node = node;
OF_getprop_alloc(node, "compat", 1, (void **)&sdi->sdi_compat);
OF_getprop_alloc(node, "device_type", 1, (void **)&sdi->sdi_type);
slot = -1;
nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)&reg);
if (nreg == -1) {
if (sdi->sdi_type == NULL ||
strcmp(sdi->sdi_type, "hierarchical") != 0) {
sbus_destroy_dinfo(sdi);
return (NULL);
}
} else {
for (i = 0; i < nreg; i++) {
base = reg[i].sbr_offset;
if (SBUS_ABS(base)) {
rslot = SBUS_ABS_TO_SLOT(base);
base = SBUS_ABS_TO_OFFSET(base);
} else
rslot = reg[i].sbr_slot;
if (slot != -1 && slot != rslot)
panic("sbus_setup_dinfo: multiple slots");
slot = rslot;
resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i,
base, base + reg[i].sbr_size, reg[i].sbr_size);
}
free(reg, M_OFWPROP);
}
sdi->sdi_slot = slot;
/*
* The `interrupts' property contains the Sbus interrupt level.
*/
nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intr), (void **)&intr);
if (nintr != -1) {
for (i = 0; i < nintr; i++) {
iv = intr[i];
/*
* Sbus card devices need the slot number encoded into
* the vector as this is generally not done.
*/
if ((iv & INTMAP_OBIO) == 0)
iv |= slot << 3;
/* Set the ign as appropriate. */
iv |= sc->sc_ign;
resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i,
iv, iv, 1);
}
free(intr, M_OFWPROP);
}
if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz,
sizeof(sdi->sdi_burstsz)) == -1)
sdi->sdi_burstsz = sc->sc_burst;
else
sdi->sdi_burstsz &= sc->sc_burst;
return (sdi);
}
/* Free everything except sdi_name, which is handled separately. */
static void
sbus_destroy_dinfo(struct sbus_devinfo *dinfo)
{
resource_list_free(&dinfo->sdi_rl);
if (dinfo->sdi_compat != NULL)
free(dinfo->sdi_compat, M_OFWPROP);
if (dinfo->sdi_type != NULL)
free(dinfo->sdi_type, M_OFWPROP);
free(dinfo, M_DEVBUF);
}
static int
sbus_print_child(device_t dev, device_t child)
{
struct sbus_devinfo *dinfo;
struct resource_list *rl;
int rv;
dinfo = device_get_ivars(child);
rl = &dinfo->sdi_rl;
rv = bus_print_child_header(dev, child);
rv += resource_list_print_type(rl, "mem", SYS_RES_MEMORY, "%#lx");
rv += resource_list_print_type(rl, "irq", SYS_RES_IRQ, "%ld");
rv += bus_print_child_footer(dev, child);
return (rv);
}
static void
sbus_probe_nomatch(device_t dev, device_t child)
{
char *name;
char *type;
if (BUS_READ_IVAR(dev, child, SBUS_IVAR_NAME,
(uintptr_t *)&name) != 0 ||
BUS_READ_IVAR(dev, child, SBUS_IVAR_DEVICE_TYPE,
(uintptr_t *)&type) != 0)
return;
if (type == NULL)
type = "(unknown)";
device_printf(dev, "<%s>, type %s (no driver attached)\n",
name, type);
}
static int
sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct sbus_softc *sc = device_get_softc(dev);
struct sbus_devinfo *dinfo;
if ((dinfo = device_get_ivars(child)) == NULL)
return (ENOENT);
switch (which) {
case SBUS_IVAR_BURSTSZ:
*result = dinfo->sdi_burstsz;
break;
case SBUS_IVAR_CLOCKFREQ:
*result = sc->sc_clockfreq;
break;
case SBUS_IVAR_COMPAT:
*result = (uintptr_t)dinfo->sdi_compat;
break;
case SBUS_IVAR_NAME:
*result = (uintptr_t)dinfo->sdi_name;
break;
case SBUS_IVAR_NODE:
*result = dinfo->sdi_node;
break;
case SBUS_IVAR_SLOT:
*result = dinfo->sdi_slot;
break;
case SBUS_IVAR_DEVICE_TYPE:
*result = (uintptr_t)dinfo->sdi_type;
break;
default:
return (ENOENT);
}
return 0;
}
static struct resource_list *
sbus_get_resource_list(device_t dev, device_t child)
{
struct sbus_devinfo *sdi;
sdi = device_get_ivars(child);
return (&sdi->sdi_rl);
}
/* Write to the correct clr register, and call the actual handler. */
static void
sbus_intr_stub(void *arg)
{
struct sbus_clr *scl;
scl = (struct sbus_clr *)arg;
scl->scl_handler(scl->scl_arg);
SYSIO_WRITE8(scl->scl_sc, scl->scl_clr, 0);
}
static int
sbus_setup_intr(device_t dev, device_t child,
struct resource *ires, int flags, driver_intr_t *intr, void *arg,
void **cookiep)
{
struct sbus_softc *sc;
struct sbus_clr *scl;
bus_addr_t intrmapptr, intrclrptr, intrptr;
u_int64_t intrmap;
u_int32_t inr, slot;
int error, i;
long vec = rman_get_start(ires);
sc = (struct sbus_softc *)device_get_softc(dev);
scl = (struct sbus_clr *)malloc(sizeof(*scl), M_DEVBUF, M_NOWAIT);
if (scl == NULL)
return (NULL);
intrptr = intrmapptr = intrclrptr = 0;
intrmap = 0;
if ((vec & SBUS_INTR_COMPAT) == 0) {
inr = INTVEC(vec);
if ((inr & INTMAP_OBIO) == 0) {
/*
* We're in an SBUS slot, register the map and clear
* intr registers.
*/
slot = INTSLOT(vec);
intrmapptr = SBR_SLOT0_INT_MAP + slot * 8;
intrclrptr = SBR_SLOT0_INT_CLR + inr * 8;
/* Enable the interrupt, insert IGN. */
intrmap = inr | sc->sc_ign;
} else {
intrptr = SBR_SCSI_INT_MAP;
/* Insert IGN */
inr |= sc->sc_ign;
for (i = 0; intrptr <= SBR_RESERVED_INT_MAP &&
INTVEC(intrmap = SYSIO_READ8(sc, intrptr)) !=
INTVEC(inr); intrptr += 8, i++)
;
if (INTVEC(intrmap) == INTVEC(inr)) {
/* Register the map and clear intr registers */
intrmapptr = intrptr;
intrclrptr = SBR_SCSI_INT_CLR + i * 8;
/* Enable the interrupt */
} else
panic("sbus_setup_intr: IRQ not found!");
}
} else
panic("sbus_setup_intr: XXX: compat");
scl->scl_sc = sc;
scl->scl_arg = arg;
scl->scl_handler = intr;
scl->scl_clr = intrclrptr;
/* Disable the interrupt while we fiddle with it */
if (intrmapptr != 0)
SYSIO_WRITE8(sc, intrmapptr, intrmap);
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires, flags,
sbus_intr_stub, scl, cookiep);
if (error != 0) {
free(scl, M_DEVBUF);
return (error);
}
scl->scl_cookie = *cookiep;
*cookiep = scl;
/*
* Clear the interrupt, it might have been triggered before it was
* set up.
*/
if (intrclrptr != 0)
SYSIO_WRITE8(sc, intrclrptr, 0);
/*
* Enable the interrupt now we have the handler installed.
* Read the current value as we can't change it besides the
* valid bit so so make sure only this bit is changed.
*/
if (intrmapptr != NULL)
SYSIO_WRITE8(sc, intrmapptr, intrmap | INTMAP_V);
return (error);
}
static int
sbus_teardown_intr(device_t dev, device_t child,
struct resource *vec, void *cookie)
{
struct sbus_clr *scl;
int error;
scl = (struct sbus_clr *)cookie;
error = BUS_TEARDOWN_INTR(device_get_parent(dev), child, vec,
scl->scl_cookie);
/*
* Don't disable the interrupt for now, so that stray interupts get
* detected...
*/
if (error != 0)
free(scl, M_DEVBUF);
return (error);
}
static struct resource *
sbus_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct sbus_softc *sc;
struct sbus_devinfo *sdi;
struct rman *rm;
struct resource *rv;
struct resource_list *rl;
struct resource_list_entry *rle;
bus_space_handle_t bh;
bus_addr_t toffs;
bus_size_t tend;
int i;
int isdefault = (start == 0UL && end == ~0UL);
int needactivate = flags & RF_ACTIVE;
sc = (struct sbus_softc *)device_get_softc(bus);
sdi = device_get_ivars(child);
rl = &sdi->sdi_rl;
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (NULL);
if (rle->res != NULL)
panic("sbus_alloc_resource: resource entry is busy");
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
switch (type) {
case SYS_RES_IRQ:
rv = bus_alloc_resource(bus, type, rid, start, end,
count, flags);
if (rv == NULL)
return (NULL);
break;
case SYS_RES_MEMORY:
rm = NULL;
bh = toffs = tend = 0;
for (i = 0; i < sc->sc_nrange; i++) {
if (sc->sc_rd[i].rd_slot != sdi->sdi_slot ||
start < sc->sc_rd[i].rd_coffset ||
start > sc->sc_rd[i].rd_cend)
continue;
/* Disallow cross-range allocations. */
if (end > sc->sc_rd[i].rd_cend)
return (NULL);
/* We've found the connection to the parent bus */
toffs = start - sc->sc_rd[i].rd_coffset;
tend = end - sc->sc_rd[i].rd_coffset;
rm = &sc->sc_rd[i].rd_rman;
bh = sc->sc_rd[i].rd_bushandle;
}
if (toffs == NULL)
return (NULL);
flags &= ~RF_ACTIVE;
rv = rman_reserve_resource(rm, toffs, tend, count, flags,
child);
if (rv == NULL)
return (NULL);
rman_set_bustag(rv, sc->sc_cbustag);
rman_set_bushandle(rv, bh + rman_get_start(rv));
if (needactivate) {
if (bus_activate_resource(child, type, *rid, rv)) {
rman_release_resource(rv);
return (NULL);
}
}
break;
default:
return (NULL);
}
rle->res = rv;
return (rv);
}
static int
sbus_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ)
return (bus_activate_resource(bus, type, rid, r));
return (rman_activate_resource(r));
}
static int
sbus_deactivate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ)
return (bus_deactivate_resource(bus, type, rid, r));
return (rman_deactivate_resource(r));
}
static int
sbus_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
int error;
if (type == SYS_RES_IRQ)
return (bus_release_resource(bus, type, rid, r));
if (rman_get_flags(r) & RF_ACTIVE) {
error = bus_deactivate_resource(child, type, rid, r);
if (error)
return error;
}
return (rman_release_resource(r));
}
/*
* Handle an overtemp situation.
*
* SPARCs have temperature sensors which generate interrupts
* if the machine's temperature exceeds a certain threshold.
* This handles the interrupt and powers off the machine.
* The same needs to be done to PCI controller drivers.
*/
static void
sbus_overtemp(void *arg)
{
printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n");
shutdown_nice(RB_POWEROFF);
}
/* Try to shut down in time in case of power failure. */
static void
sbus_pwrfail(void *arg)
{
printf("Power failure detected\nShutting down NOW.\n");
shutdown_nice(0);
}
static bus_space_tag_t
sbus_alloc_bustag(struct sbus_softc *sc)
{
bus_space_tag_t sbt;
sbt = (bus_space_tag_t)malloc(sizeof(struct bus_space_tag), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (sbt == NULL)
panic("sbus_alloc_bustag: out of memory");
bzero(sbt, sizeof *sbt);
sbt->cookie = sc;
sbt->parent = sc->sc_bustag;
sbt->type = SBUS_BUS_SPACE;
return (sbt);
}
static int
sbus_dmamap_create(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, int flags,
bus_dmamap_t *mapp)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
return (iommu_dvmamap_create(pdmat, ddmat, &sc->sc_is, flags, mapp));
}
static int
sbus_dmamap_destroy(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, bus_dmamap_t map)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
return (iommu_dvmamap_destroy(pdmat, ddmat, &sc->sc_is, map));
}
static int
sbus_dmamap_load(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, bus_dmamap_t map,
void *buf, bus_size_t buflen, bus_dmamap_callback_t *callback,
void *callback_arg, int flags)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
return (iommu_dvmamap_load(pdmat, ddmat, &sc->sc_is, map, buf, buflen,
callback, callback_arg, flags));
}
static void
sbus_dmamap_unload(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, bus_dmamap_t map)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
iommu_dvmamap_unload(pdmat, ddmat, &sc->sc_is, map);
}
static void
sbus_dmamap_sync(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, bus_dmamap_t map,
bus_dmasync_op_t op)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
iommu_dvmamap_sync(pdmat, ddmat, &sc->sc_is, map, op);
}
static int
sbus_dmamem_alloc(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, void **vaddr,
int flags, bus_dmamap_t *mapp)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
return (iommu_dvmamem_alloc(pdmat, ddmat, &sc->sc_is, vaddr, flags,
mapp));
}
static void
sbus_dmamem_free(bus_dma_tag_t pdmat, bus_dma_tag_t ddmat, void *vaddr,
bus_dmamap_t map)
{
struct sbus_softc *sc = (struct sbus_softc *)pdmat->cookie;
iommu_dvmamem_free(pdmat, ddmat, &sc->sc_is, vaddr, map);
}