483 lines
14 KiB
C
483 lines
14 KiB
C
/*
|
|
* Copyright (c) 1998, 1999 Martin Husemann <martin@rumolt.teuto.de>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software withough specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*---------------------------------------------------------------------------
|
|
*
|
|
* i4b_itk_ix1.c - ITK ix1 micro passive card driver for isdn4bsd
|
|
* --------------------------------------------------------------
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
* last edit-date: [Sun Feb 14 10:28:00 1999]
|
|
*
|
|
* mh - created
|
|
* mh - fixed FreeBSD problems reported by Kevin Sheehan
|
|
* mh - added probe routine
|
|
*
|
|
*---------------------------------------------------------------------------
|
|
*
|
|
* The ITK ix1 micro ISDN card is an ISA card with one region
|
|
* of four io ports mapped and a fixed irq all jumpered on the card.
|
|
* Access to the board is straight forward and simmilar to
|
|
* the ELSA and DYNALINK cards. If a PCI version of this card
|
|
* exists all we need is probably a pci-bus attachment, all
|
|
* this low level routines should work imediately.
|
|
*
|
|
* To reset the card:
|
|
* - write 0x01 to ITK_CONFIG
|
|
* - wait >= 10 ms
|
|
* - write 0x00 to ITK_CONFIG
|
|
*
|
|
* To read or write data:
|
|
* - write address to ITK_ALE port
|
|
* - read data from or write data to ITK_ISAC_DATA port or ITK_HSCX_DATA port
|
|
* The two HSCX channel registers are offset by HSCXA (0x00) and HSCXB (0x40).
|
|
*
|
|
* The probe routine was derived by trial and error from a representative
|
|
* sample of two cards ;-) The standard way (checking HSCX versions)
|
|
* was extended by reading a zero from a non existant HSCX register (register
|
|
* 0xff). Reading the config register gives varying results, so this doesn't
|
|
* seem to be used as an id register (like the Teles S0/16.3).
|
|
*
|
|
* If the probe fails for your card use "options ITK_PROBE_DEBUG" to get
|
|
* additional debug output.
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
#if defined(__FreeBSD__)
|
|
#include "isic.h"
|
|
#include "opt_i4b.h"
|
|
#else
|
|
#define NISIC 1
|
|
#endif
|
|
#if NISIC > 0 && defined(ITKIX1)
|
|
|
|
#include <sys/param.h>
|
|
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
|
|
#include <sys/ioccom.h>
|
|
#else
|
|
#include <sys/ioctl.h>
|
|
#endif
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
#include <machine/clock.h>
|
|
#include <i386/isa/isa_device.h>
|
|
#else
|
|
#include <machine/bus.h>
|
|
#include <sys/device.h>
|
|
#endif
|
|
|
|
#include <sys/socket.h>
|
|
#include <net/if.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
#include <machine/i4b_debug.h>
|
|
#include <machine/i4b_ioctl.h>
|
|
#else
|
|
#include <i4b/i4b_debug.h>
|
|
#include <i4b/i4b_ioctl.h>
|
|
#endif
|
|
|
|
#include <i4b/layer1/i4b_l1.h>
|
|
#include <i4b/layer1/i4b_isac.h>
|
|
#include <i4b/layer1/i4b_hscx.h>
|
|
|
|
#include <i4b/include/i4b_global.h>
|
|
|
|
/* Register offsets */
|
|
#define ITK_ISAC_DATA 0
|
|
#define ITK_HSCX_DATA 1
|
|
#define ITK_ALE 2
|
|
#define ITK_CONFIG 3
|
|
|
|
/* Size of IO range to allocate for this card */
|
|
#define ITK_IO_SIZE 4
|
|
|
|
/* Register offsets for the two HSCX channels */
|
|
#define HSCXA 0
|
|
#define HSCXB 0x40
|
|
|
|
/*
|
|
* Local function prototypes
|
|
*/
|
|
#ifdef __FreeBSD__
|
|
/* FreeBSD version */
|
|
static void itkix1_read_fifo(void *buf, const void *base, size_t len);
|
|
static void itkix1_write_fifo(void *base, const void *buf, size_t len);
|
|
static void itkix1_write_reg(u_char *base, u_int offset, u_int v);
|
|
static u_char itkix1_read_reg(u_char *base, u_int offset);
|
|
#else
|
|
/* NetBSD/OpenBSD version */
|
|
static void itkix1_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size);
|
|
static void itkix1_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size);
|
|
static void itkix1_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data);
|
|
static u_int8_t itkix1_read_reg(struct isic_softc *sc, int what, bus_size_t offs);
|
|
#endif
|
|
|
|
/*
|
|
* Probe for card
|
|
*/
|
|
#ifdef __FreeBSD__
|
|
int
|
|
isic_probe_itkix1(struct isa_device *dev)
|
|
{
|
|
u_int8_t hd, hv1, hv2, saveale;
|
|
int ret;
|
|
|
|
/* save old value of this port, we're stomping over it */
|
|
saveale = inb(dev->id_iobase + ITK_ALE);
|
|
|
|
/* select invalid register */
|
|
outb(dev->id_iobase + ITK_ALE, 0xff);
|
|
/* get HSCX data for this non existent register */
|
|
hd = inb(dev->id_iobase + ITK_HSCX_DATA);
|
|
/* get HSCX version info */
|
|
outb(dev->id_iobase + ITK_ALE, HSCXA + H_VSTR);
|
|
hv1 = inb(dev->id_iobase + ITK_HSCX_DATA);
|
|
outb(dev->id_iobase + ITK_ALE, HSCXB + H_VSTR);
|
|
hv2 = inb(dev->id_iobase + ITK_HSCX_DATA);
|
|
|
|
/* succeed if version bits are OK and we got a zero from the
|
|
* non existent register */
|
|
ret = (hd == 0) && ((hv1 & 0x0f) == 0x05) && ((hv2 & 0x0f) == 0x05);
|
|
|
|
/* retstore save value if we fail (if we succeed the old value
|
|
* has no meaning) */
|
|
if (!ret)
|
|
outb(dev->id_iobase + ITK_ALE, saveale);
|
|
|
|
#ifdef ITK_PROBE_DEBUG
|
|
printf("\nITK ix1 micro probe: hscx = 0x%02x, v1 = 0x%02x, v2 = 0x%02x, would have %s\n",
|
|
hd, hv1, hv2, ret ? "succeeded" : "failed");
|
|
return 1;
|
|
#else
|
|
return ret;
|
|
#endif
|
|
}
|
|
#else
|
|
int
|
|
isic_probe_itkix1(struct isic_attach_args *ia)
|
|
{
|
|
bus_space_tag_t t = ia->ia_maps[0].t;
|
|
bus_space_handle_t h = ia->ia_maps[0].h;
|
|
u_int8_t hd, hv1, hv2, saveale;
|
|
int ret;
|
|
|
|
/* save old value of this port, we're stomping over it */
|
|
saveale = bus_space_read_1(t, h, ITK_ALE);
|
|
|
|
/* select invalid register */
|
|
bus_space_write_1(t, h, ITK_ALE, 0xff);
|
|
/* get HSCX data for this non existent register */
|
|
hd = bus_space_read_1(t, h, ITK_HSCX_DATA);
|
|
/* get HSCX version info */
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXA + H_VSTR);
|
|
hv1 = bus_space_read_1(t, h, ITK_HSCX_DATA);
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXB + H_VSTR);
|
|
hv2 = bus_space_read_1(t, h, ITK_HSCX_DATA);
|
|
|
|
/* succeed if version bits are OK and we got a zero from the
|
|
* non existent register */
|
|
ret = (hd == 0) && ((hv1 & 0x0f) == 0x05) && ((hv2 & 0x0f) == 0x05);
|
|
|
|
/* retstore save value if we fail (if we succeed the old value
|
|
* has no meaning) */
|
|
if (!ret)
|
|
bus_space_write_1(t, h, ITK_ALE, saveale);
|
|
|
|
#ifdef ITK_PROBE_DEBUG
|
|
printf("\nITK ix1 micro probe: hscx = 0x%02x, v1 = 0x%02x, v2 = 0x%02x, would have %s\n",
|
|
hd, hv1, hv2, ret ? "succeeded" : "failed");
|
|
return 1;
|
|
#else
|
|
return ret;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Attach card
|
|
*/
|
|
#ifdef __FreeBSD__
|
|
int
|
|
isic_attach_itkix1(struct isa_device *dev)
|
|
{
|
|
struct isic_softc *sc = &isic_sc[dev->id_unit];
|
|
|
|
sc->sc_irq = dev->id_irq;
|
|
|
|
dev->id_msize = 0;
|
|
|
|
/* check if we got an iobase */
|
|
sc->sc_port = dev->id_iobase;
|
|
|
|
/* setup access routines */
|
|
sc->clearirq = NULL;
|
|
sc->readreg = itkix1_read_reg;
|
|
sc->writereg = itkix1_write_reg;
|
|
sc->readfifo = itkix1_read_fifo;
|
|
sc->writefifo = itkix1_write_fifo;
|
|
|
|
/* setup card type */
|
|
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
|
|
|
|
/* setup IOM bus type */
|
|
sc->sc_bustyp = BUS_TYPE_IOM2;
|
|
|
|
sc->sc_ipac = 0;
|
|
sc->sc_bfifolen = HSCX_FIFO_LEN;
|
|
|
|
/* setup ISAC and HSCX base addr */
|
|
ISAC_BASE = (caddr_t) sc->sc_port;
|
|
HSCX_A_BASE = (caddr_t) sc->sc_port + 1;
|
|
HSCX_B_BASE = (caddr_t) sc->sc_port + 2;
|
|
|
|
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1). */
|
|
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) || ((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
|
|
{
|
|
printf("isic%d: HSCX VSTR test failed for ITK ix1 micro\n",
|
|
dev->id_unit);
|
|
printf("isic%d: HSC0: VSTR: %#x\n",
|
|
dev->id_unit, HSCX_READ(0, H_VSTR));
|
|
printf("isic%d: HSC1: VSTR: %#x\n",
|
|
dev->id_unit, HSCX_READ(1, H_VSTR));
|
|
return (0);
|
|
}
|
|
|
|
outb((dev->id_iobase)+ITK_CONFIG, 1);
|
|
DELAY(SEC_DELAY / 10);
|
|
outb((dev->id_iobase)+ITK_CONFIG, 0);
|
|
DELAY(SEC_DELAY / 10);
|
|
return(1);
|
|
}
|
|
|
|
#else
|
|
|
|
int isic_attach_itkix1(struct isic_softc *sc)
|
|
{
|
|
/* setup access routines */
|
|
sc->clearirq = NULL;
|
|
sc->readreg = itkix1_read_reg;
|
|
sc->writereg = itkix1_write_reg;
|
|
sc->readfifo = itkix1_read_fifo;
|
|
sc->writefifo = itkix1_write_fifo;
|
|
|
|
/* setup card type */
|
|
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
|
|
|
|
/* setup IOM bus type */
|
|
sc->sc_bustyp = BUS_TYPE_IOM2;
|
|
|
|
sc->sc_ipac = 0;
|
|
sc->sc_bfifolen = HSCX_FIFO_LEN;
|
|
|
|
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1). */
|
|
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) || ((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
|
|
{
|
|
printf("%s: HSCX VSTR test failed for ITK ix1 micro\n",
|
|
sc->sc_dev.dv_xname);
|
|
printf("%s: HSC0: VSTR: %#x\n",
|
|
sc->sc_dev.dv_xname, HSCX_READ(0, H_VSTR));
|
|
printf("%s: HSC1: VSTR: %#x\n",
|
|
sc->sc_dev.dv_xname, HSCX_READ(1, H_VSTR));
|
|
return 0;
|
|
}
|
|
|
|
bus_space_write_1(sc->sc_maps[0].t, sc->sc_maps[0].h, ITK_CONFIG, 1);
|
|
DELAY(SEC_DELAY / 10);
|
|
bus_space_write_1(sc->sc_maps[0].t, sc->sc_maps[0].h, ITK_CONFIG, 0);
|
|
DELAY(SEC_DELAY / 10);
|
|
return 1;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
static void
|
|
itkix1_read_fifo(void *buf, const void *base, size_t len)
|
|
{
|
|
u_int port = (u_int)base & ~0x0003;
|
|
switch ((u_int)base & 3) {
|
|
case 0: /* ISAC */
|
|
outb(port+ITK_ALE, 0);
|
|
insb(port+ITK_ISAC_DATA, (u_char *)buf, (u_int)len);
|
|
break;
|
|
case 1: /* HSCXA */
|
|
outb(port+ITK_ALE, HSCXA);
|
|
insb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
|
|
break;
|
|
case 2: /* HSCXB */
|
|
outb(port+ITK_ALE, HSCXB);
|
|
insb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
static void
|
|
itkix1_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ITK_ALE, 0);
|
|
bus_space_read_multi_1(t, h, ITK_ISAC_DATA, buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXA);
|
|
bus_space_read_multi_1(t, h, ITK_HSCX_DATA, buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXB);
|
|
bus_space_read_multi_1(t, h, ITK_HSCX_DATA, buf, size);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
static void
|
|
itkix1_write_fifo(void *base, const void *buf, size_t len)
|
|
{
|
|
u_int port = (u_int)base & ~0x0003;
|
|
switch ((u_int)base & 3) {
|
|
case 0: /* ISAC */
|
|
outb(port+ITK_ALE, 0);
|
|
outsb(port+ITK_ISAC_DATA, (u_char *)buf, (u_int)len);
|
|
break;
|
|
case 1: /* HSCXA */
|
|
outb(port+ITK_ALE, HSCXA);
|
|
outsb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
|
|
break;
|
|
case 2: /* HSCXB */
|
|
outb(port+ITK_ALE, HSCXB);
|
|
outsb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
static void itkix1_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ITK_ALE, 0);
|
|
bus_space_write_multi_1(t, h, ITK_ISAC_DATA, (u_int8_t*)buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXA);
|
|
bus_space_write_multi_1(t, h, ITK_HSCX_DATA, (u_int8_t*)buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXB);
|
|
bus_space_write_multi_1(t, h, ITK_HSCX_DATA, (u_int8_t*)buf, size);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
static void
|
|
itkix1_write_reg(u_char *base, u_int offset, u_int v)
|
|
{
|
|
u_int port = (u_int)base & ~0x0003;
|
|
switch ((u_int)base & 3) {
|
|
case 0: /* ISAC */
|
|
outb(port+ITK_ALE, offset);
|
|
outb(port+ITK_ISAC_DATA, (u_char)v);
|
|
break;
|
|
case 1: /* HSCXA */
|
|
outb(port+ITK_ALE, HSCXA+offset);
|
|
outb(port+ITK_HSCX_DATA, (u_char)v);
|
|
break;
|
|
case 2: /* HSCXB */
|
|
outb(port+ITK_ALE, HSCXB+offset);
|
|
outb(port+ITK_HSCX_DATA, (u_char)v);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
static void itkix1_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ITK_ALE, offs);
|
|
bus_space_write_1(t, h, ITK_ISAC_DATA, data);
|
|
break;
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXA+offs);
|
|
bus_space_write_1(t, h, ITK_HSCX_DATA, data);
|
|
break;
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXB+offs);
|
|
bus_space_write_1(t, h, ITK_HSCX_DATA, data);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
static u_char
|
|
itkix1_read_reg(u_char *base, u_int offset)
|
|
{
|
|
u_int port = (u_int)base & ~0x0003;
|
|
switch ((u_int)base & 3) {
|
|
case 0: /* ISAC */
|
|
outb(port+ITK_ALE, offset);
|
|
return (inb(port+ITK_ISAC_DATA));
|
|
case 1: /* HSCXA */
|
|
outb(port+ITK_ALE, HSCXA+offset);
|
|
return (inb(port+ITK_HSCX_DATA));
|
|
case 2: /* HSCXB */
|
|
outb(port+ITK_ALE, HSCXB+offset);
|
|
return (inb(port+ITK_HSCX_DATA));
|
|
}
|
|
}
|
|
#else
|
|
static u_int8_t itkix1_read_reg(struct isic_softc *sc, int what, bus_size_t offs)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ITK_ALE, offs);
|
|
return bus_space_read_1(t, h, ITK_ISAC_DATA);
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXA+offs);
|
|
return bus_space_read_1(t, h, ITK_HSCX_DATA);
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ITK_ALE, HSCXB+offs);
|
|
return bus_space_read_1(t, h, ITK_HSCX_DATA);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#endif /* ITKIX1 */
|