498e55436a
This adds support for cardbus ATA/SATA controllers. I get roughly the same transfer speeds as on true PCI controllers. Nice to be able to add a couble of "real" disks to a laptop :)
848 lines
25 KiB
C
848 lines
25 KiB
C
/*-
|
|
* Copyright (c) 1998 - 2004 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <vm/uma.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/ata/ata-all.h>
|
|
|
|
/* prototypes */
|
|
static int ata_transaction(struct ata_request *);
|
|
static void ata_interrupt(void *);
|
|
static void ata_reset(struct ata_channel *);
|
|
static int ata_wait(struct ata_device *, u_int8_t);
|
|
static int ata_command(struct ata_device *, u_int8_t, u_int64_t, u_int16_t, u_int16_t);
|
|
static void ata_pio_read(struct ata_request *, int);
|
|
static void ata_pio_write(struct ata_request *, int);
|
|
|
|
/* local vars */
|
|
static int atadebug = 0;
|
|
|
|
/*
|
|
* low level ATA functions
|
|
*/
|
|
void
|
|
ata_generic_hw(struct ata_channel *ch)
|
|
{
|
|
ch->hw.reset = ata_reset;
|
|
ch->hw.transaction = ata_transaction;
|
|
ch->hw.interrupt = ata_interrupt;
|
|
}
|
|
|
|
/* must be called with ATA channel locked */
|
|
static int
|
|
ata_transaction(struct ata_request *request)
|
|
{
|
|
/* safetybelt for HW that went away */
|
|
if (!request->device->param || request->device->channel->flags&ATA_HWGONE) {
|
|
request->result = ENXIO;
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* record the request as running */
|
|
request->device->channel->running = request;
|
|
|
|
ATA_DEBUG_RQ(request, "transaction");
|
|
|
|
/* disable ATAPI DMA writes if HW doesn't support it */
|
|
if ((request->device->channel->flags & ATA_ATAPI_DMA_RO) &&
|
|
((request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_WRITE)) ==
|
|
(ATA_R_ATAPI | ATA_R_DMA | ATA_R_WRITE)))
|
|
request->flags &= ~ATA_R_DMA;
|
|
|
|
switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA)) {
|
|
|
|
/* ATA PIO data transfer and control commands */
|
|
default:
|
|
{
|
|
/* record command direction here as our request might be gone later */
|
|
int write = (request->flags & ATA_R_WRITE);
|
|
|
|
/* issue command */
|
|
if (ata_command(request->device, request->u.ata.command,
|
|
request->u.ata.lba, request->u.ata.count,
|
|
request->u.ata.feature)) {
|
|
ata_prtdev(request->device, "error issueing PIO command\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* if write command output the data */
|
|
if (write) {
|
|
if (ata_wait(request->device,
|
|
(ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) {
|
|
ata_prtdev(request->device,"timeout waiting for write DRQ");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
ata_pio_write(request, request->transfersize);
|
|
}
|
|
}
|
|
|
|
/* return and wait for interrupt */
|
|
return ATA_OP_CONTINUES;
|
|
|
|
/* ATA DMA data transfer commands */
|
|
case ATA_R_DMA:
|
|
/* check sanity, setup SG list and DMA engine */
|
|
if (request->device->channel->dma->load(request->device,
|
|
request->data,
|
|
request->bytecount,
|
|
request->flags & ATA_R_READ)) {
|
|
ata_prtdev(request->device, "setting up DMA failed\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* issue command */
|
|
if (ata_command(request->device, request->u.ata.command,
|
|
request->u.ata.lba, request->u.ata.count,
|
|
request->u.ata.feature)) {
|
|
ata_prtdev(request->device, "error issuing DMA command\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* start DMA engine */
|
|
if (request->device->channel->dma->start(request->device->channel)) {
|
|
ata_prtdev(request->device, "error starting DMA\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* return and wait for interrupt */
|
|
return ATA_OP_CONTINUES;
|
|
|
|
/* ATAPI PIO commands */
|
|
case ATA_R_ATAPI:
|
|
/* is this just a POLL DSC command ? */
|
|
if (request->u.atapi.ccb[0] == ATAPI_POLL_DSC) {
|
|
ATA_IDX_OUTB(request->device->channel, ATA_DRIVE,
|
|
ATA_D_IBM | request->device->unit);
|
|
DELAY(10);
|
|
if (!(ATA_IDX_INB(request->device->channel, ATA_ALTSTAT)&ATA_S_DSC))
|
|
request->result = EBUSY;
|
|
break;
|
|
}
|
|
|
|
/* start ATAPI operation */
|
|
if (ata_command(request->device, ATA_PACKET_CMD,
|
|
request->transfersize << 8, 0, 0)) {
|
|
ata_prtdev(request->device, "error issuing ATA PACKET command\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* command interrupt device ? just return and wait for interrupt */
|
|
if ((request->device->param->config & ATA_DRQ_MASK) == ATA_DRQ_INTR)
|
|
return ATA_OP_CONTINUES;
|
|
|
|
/* wait for ready to write ATAPI command block */
|
|
{
|
|
int timeout = 5000; /* might be less for fast devices */
|
|
while (timeout--) {
|
|
int reason = ATA_IDX_INB(request->device->channel, ATA_IREASON);
|
|
int status = ATA_IDX_INB(request->device->channel, ATA_STATUS);
|
|
|
|
if (((reason & (ATA_I_CMD | ATA_I_IN)) |
|
|
(status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT)
|
|
break;
|
|
DELAY(20);
|
|
}
|
|
if (timeout <= 0) {
|
|
ata_prtdev(request->device,
|
|
"timeout waiting for ATAPI ready\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* this seems to be needed for some (slow) devices */
|
|
DELAY(10);
|
|
|
|
/* output actual command block */
|
|
ATA_IDX_OUTSW_STRM(request->device->channel, ATA_DATA,
|
|
(int16_t *)request->u.atapi.ccb,
|
|
(request->device->param->config & ATA_PROTO_MASK) ==
|
|
ATA_PROTO_ATAPI_12 ? 6 : 8);
|
|
|
|
/* return and wait for interrupt */
|
|
return ATA_OP_CONTINUES;
|
|
|
|
case ATA_R_ATAPI|ATA_R_DMA:
|
|
/* is this just a POLL DSC command ? */
|
|
if (request->u.atapi.ccb[0] == ATAPI_POLL_DSC) {
|
|
ATA_IDX_OUTB(request->device->channel, ATA_DRIVE,
|
|
ATA_D_IBM | request->device->unit);
|
|
DELAY(10);
|
|
if (!(ATA_IDX_INB(request->device->channel, ATA_ALTSTAT)&ATA_S_DSC))
|
|
request->result = EBUSY;
|
|
break;
|
|
}
|
|
|
|
/* check sanity, setup SG list and DMA engine */
|
|
if (request->device->channel->dma->load(request->device,
|
|
request->data,
|
|
request->bytecount,
|
|
request->flags & ATA_R_READ)) {
|
|
ata_prtdev(request->device, "setting up DMA failed\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* start ATAPI operation */
|
|
if (ata_command(request->device, ATA_PACKET_CMD, 0, 0, ATA_F_DMA)) {
|
|
ata_prtdev(request->device, "error issuing ATAPI packet command\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* wait for ready to write ATAPI command block */
|
|
{
|
|
int timeout = 5000; /* might be less for fast devices */
|
|
while (timeout--) {
|
|
int reason = ATA_IDX_INB(request->device->channel, ATA_IREASON);
|
|
int status = ATA_IDX_INB(request->device->channel, ATA_STATUS);
|
|
|
|
if (((reason & (ATA_I_CMD | ATA_I_IN)) |
|
|
(status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT)
|
|
break;
|
|
DELAY(20);
|
|
}
|
|
if (timeout <= 0) {
|
|
ata_prtdev(request->device,"timeout waiting for ATAPI ready\n");
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* this seems to be needed for some (slow) devices */
|
|
DELAY(10);
|
|
|
|
/* output actual command block */
|
|
ATA_IDX_OUTSW_STRM(request->device->channel, ATA_DATA,
|
|
(int16_t *)request->u.atapi.ccb,
|
|
(request->device->param->config & ATA_PROTO_MASK) ==
|
|
ATA_PROTO_ATAPI_12 ? 6 : 8);
|
|
|
|
/* start DMA engine */
|
|
if (request->device->channel->dma->start(request->device->channel)) {
|
|
request->result = EIO;
|
|
break;
|
|
}
|
|
|
|
/* return and wait for interrupt */
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
/* request finish here */
|
|
if (request->device->channel->dma->flags & ATA_DMA_ACTIVE)
|
|
request->device->channel->dma->unload(request->device->channel);
|
|
request->device->channel->running = NULL;
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
static void
|
|
ata_interrupt(void *data)
|
|
{
|
|
struct ata_channel *ch = (struct ata_channel *)data;
|
|
struct ata_request *request = ch->running;
|
|
int length;
|
|
|
|
/* ignore this interrupt if there is no running request */
|
|
if (!request) {
|
|
if (ATA_LOCK_CH(ch, ATA_CONTROL)) {
|
|
u_int8_t status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
u_int8_t error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
|
|
if (bootverbose)
|
|
ata_printf(ch, -1,
|
|
"spurious interrupt - status=0x%02x error=0x%02x\n",
|
|
status, error);
|
|
ATA_UNLOCK_CH(ch);
|
|
}
|
|
else {
|
|
if (bootverbose)
|
|
ata_printf(ch, -1, "spurious interrupt - channel busy\n");
|
|
}
|
|
return;
|
|
}
|
|
|
|
ATA_DEBUG_RQ(request, "interrupt");
|
|
|
|
/* ignore interrupt if device is busy */
|
|
if (!(request->flags & ATA_R_TIMEOUT) &&
|
|
ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY) {
|
|
DELAY(100);
|
|
if (!(ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_DRQ))
|
|
return;
|
|
}
|
|
|
|
ATA_DEBUG_RQ(request, "interrupt accepted");
|
|
|
|
/* clear interrupt and get status */
|
|
request->status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
|
|
|
|
if (!(request->flags & ATA_R_TIMEOUT))
|
|
request->flags |= ATA_R_INTR_SEEN;
|
|
|
|
switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_CONTROL)) {
|
|
|
|
/* ATA PIO data transfer and control commands */
|
|
default:
|
|
|
|
/* on control commands read back registers to the request struct */
|
|
if (request->flags & ATA_R_CONTROL) {
|
|
request->u.ata.count = ATA_IDX_INB(ch, ATA_COUNT);
|
|
request->u.ata.lba = ATA_IDX_INB(ch, ATA_SECTOR) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_LSB) << 8) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_MSB) << 16);
|
|
}
|
|
|
|
/* if we got an error we are done with the HW */
|
|
if (request->status & ATA_S_ERROR) {
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
break;
|
|
}
|
|
|
|
/* are we moving data ? */
|
|
if (request->flags & (ATA_R_READ | ATA_R_WRITE)) {
|
|
|
|
/* if read data get it */
|
|
if (request->flags & ATA_R_READ)
|
|
ata_pio_read(request, request->transfersize);
|
|
|
|
/* update how far we've gotten */
|
|
request->donecount += request->transfersize;
|
|
|
|
/* do we need a scoop more ? */
|
|
if (request->bytecount > request->donecount) {
|
|
|
|
/* set this transfer size according to HW capabilities */
|
|
request->transfersize =
|
|
min((request->bytecount - request->donecount),
|
|
request->transfersize);
|
|
|
|
/* clear interrupt seen flag as we need to wait again */
|
|
request->flags &= ~ATA_R_INTR_SEEN;
|
|
|
|
/* if data write command, output the data */
|
|
if (request->flags & ATA_R_WRITE) {
|
|
|
|
/* if we get an error here we are done with the HW */
|
|
if (ata_wait(request->device,
|
|
(ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) {
|
|
ata_prtdev(request->device,
|
|
"timeout waiting for write DRQ");
|
|
request->status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
break;
|
|
}
|
|
|
|
/* output data and return waiting for new interrupt */
|
|
ata_pio_write(request, request->transfersize);
|
|
return;
|
|
}
|
|
|
|
/* if data read command, return & wait for interrupt */
|
|
if (request->flags & ATA_R_READ)
|
|
return;
|
|
}
|
|
}
|
|
/* done with HW */
|
|
break;
|
|
|
|
/* ATA DMA data transfer commands */
|
|
case ATA_R_DMA:
|
|
/* stop DMA engine and get status */
|
|
request->dmastat = ch->dma->stop(ch);
|
|
|
|
/* did we get error or data */
|
|
if (request->status & ATA_S_ERROR)
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
else if (request->dmastat & ATA_BMSTAT_ERROR)
|
|
request->status |= ATA_S_ERROR;
|
|
else
|
|
request->donecount = request->bytecount;
|
|
|
|
/* release SG list etc */
|
|
ch->dma->unload(ch);
|
|
|
|
/* done with HW */
|
|
break;
|
|
|
|
/* ATAPI PIO commands */
|
|
case ATA_R_ATAPI:
|
|
length = ATA_IDX_INB(ch, ATA_CYL_LSB)|(ATA_IDX_INB(ch, ATA_CYL_MSB)<<8);
|
|
|
|
switch ((ATA_IDX_INB(ch, ATA_IREASON) & (ATA_I_CMD | ATA_I_IN)) |
|
|
(request->status & ATA_S_DRQ)) {
|
|
|
|
case ATAPI_P_CMDOUT:
|
|
/* this seems to be needed for some (slow) devices */
|
|
DELAY(10);
|
|
|
|
if (!(request->status & ATA_S_DRQ)) {
|
|
ata_prtdev(request->device, "command interrupt without DRQ\n");
|
|
request->status = ATA_S_ERROR;
|
|
break;
|
|
}
|
|
ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (int16_t *)request->u.atapi.ccb,
|
|
(request->device->param->config &
|
|
ATA_PROTO_MASK)== ATA_PROTO_ATAPI_12 ? 6 : 8);
|
|
/* return wait for interrupt */
|
|
return;
|
|
|
|
case ATAPI_P_WRITE:
|
|
if (request->flags & ATA_R_READ) {
|
|
request->status = ATA_S_ERROR;
|
|
ata_prtdev(request->device,
|
|
"%s trying to write on read buffer\n",
|
|
ata_cmd2str(request));
|
|
break;
|
|
}
|
|
ata_pio_write(request, length);
|
|
request->donecount += length;
|
|
|
|
/* set next transfer size according to HW capabilities */
|
|
request->transfersize = min((request->bytecount-request->donecount),
|
|
request->transfersize);
|
|
/* return wait for interrupt */
|
|
return;
|
|
|
|
case ATAPI_P_READ:
|
|
if (request->flags & ATA_R_WRITE) {
|
|
request->status = ATA_S_ERROR;
|
|
ata_prtdev(request->device,
|
|
"%s trying to read on write buffer\n",
|
|
ata_cmd2str(request));
|
|
break;
|
|
}
|
|
ata_pio_read(request, length);
|
|
request->donecount += length;
|
|
|
|
/* set next transfer size according to HW capabilities */
|
|
request->transfersize = min((request->bytecount-request->donecount),
|
|
request->transfersize);
|
|
/* return wait for interrupt */
|
|
return;
|
|
|
|
case ATAPI_P_DONEDRQ:
|
|
ata_prtdev(request->device,
|
|
"WARNING - %s DONEDRQ non conformant device\n",
|
|
ata_cmd2str(request));
|
|
if (request->flags & ATA_R_READ) {
|
|
ata_pio_read(request, length);
|
|
request->donecount += length;
|
|
}
|
|
else if (request->flags & ATA_R_WRITE) {
|
|
ata_pio_write(request, length);
|
|
request->donecount += length;
|
|
}
|
|
else
|
|
request->status = ATA_S_ERROR;
|
|
/* FALLTHROUGH */
|
|
|
|
case ATAPI_P_ABORT:
|
|
case ATAPI_P_DONE:
|
|
if (request->status & (ATA_S_ERROR | ATA_S_DWF))
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
break;
|
|
|
|
default:
|
|
ata_prtdev(request->device, "unknown transfer phase\n");
|
|
request->status = ATA_S_ERROR;
|
|
}
|
|
|
|
/* done with HW */
|
|
break;
|
|
|
|
/* ATAPI DMA commands */
|
|
case ATA_R_ATAPI|ATA_R_DMA:
|
|
|
|
/* stop the engine and get engine status */
|
|
request->dmastat = ch->dma->stop(ch);
|
|
|
|
/* did we get error or data */
|
|
if (request->status & (ATA_S_ERROR | ATA_S_DWF))
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
else if (request->dmastat & ATA_BMSTAT_ERROR)
|
|
request->status |= ATA_S_ERROR;
|
|
else
|
|
request->donecount = request->bytecount;
|
|
|
|
/* release SG list etc */
|
|
ch->dma->unload(ch);
|
|
|
|
/* done with HW */
|
|
break;
|
|
}
|
|
|
|
/* if we timed out the unlocking of the ATA channel is done later */
|
|
if (!(request->flags & ATA_R_TIMEOUT)) {
|
|
ch->running = NULL;
|
|
ATA_UNLOCK_CH(ch);
|
|
ch->locking(ch, ATA_LF_UNLOCK);
|
|
}
|
|
|
|
/* schedule completition for this request */
|
|
ata_finish(request);
|
|
}
|
|
|
|
/* must be called with ATA channel locked */
|
|
static void
|
|
ata_reset(struct ata_channel *ch)
|
|
{
|
|
u_int8_t err, lsb, msb, ostat0, ostat1;
|
|
u_int8_t stat0 = 0, stat1 = 0;
|
|
int mask = 0, timeout;
|
|
|
|
/* do we have any signs of ATA/ATAPI HW being present ? */
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
ostat0 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if ((ostat0 & 0xf8) != 0xf8 && ostat0 != 0xa5) {
|
|
stat0 = ATA_S_BUSY;
|
|
mask |= 0x01;
|
|
}
|
|
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE);
|
|
DELAY(10);
|
|
ostat1 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
|
|
/* in some setups we dont want to test for a slave */
|
|
if (!(ch->flags & ATA_NO_SLAVE)) {
|
|
if ((ostat1 & 0xf8) != 0xf8 && ostat1 != 0xa5) {
|
|
stat1 = ATA_S_BUSY;
|
|
mask |= 0x02;
|
|
}
|
|
}
|
|
|
|
/* if nothing showed up there is no need to get any further */
|
|
/* SOS is that too strong?, we just might loose devices here XXX */
|
|
ch->devices = 0;
|
|
if (!mask)
|
|
return;
|
|
|
|
if (bootverbose)
|
|
ata_printf(ch, -1, "reset tp1 mask=%02x ostat0=%02x ostat1=%02x\n",
|
|
mask, ostat0, ostat1);
|
|
|
|
/* reset host end of channel (if supported) */
|
|
if (ch->reset)
|
|
ch->reset(ch);
|
|
|
|
/* reset (both) devices on this channel */
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
ATA_IDX_OUTB(ch, ATA_ALTSTAT, ATA_A_IDS | ATA_A_RESET);
|
|
DELAY(10000);
|
|
ATA_IDX_OUTB(ch, ATA_ALTSTAT, ATA_A_IDS);
|
|
DELAY(100000);
|
|
ATA_IDX_INB(ch, ATA_ERROR);
|
|
|
|
/* wait for BUSY to go inactive */
|
|
for (timeout = 0; timeout < 310; timeout++) {
|
|
if (stat0 & ATA_S_BUSY) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_MASTER);
|
|
DELAY(10);
|
|
err = ATA_IDX_INB(ch, ATA_ERROR);
|
|
lsb = ATA_IDX_INB(ch, ATA_CYL_LSB);
|
|
msb = ATA_IDX_INB(ch, ATA_CYL_MSB);
|
|
stat0 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if (bootverbose)
|
|
ata_printf(ch, ATA_MASTER,
|
|
"stat=0x%02x err=0x%02x lsb=0x%02x msb=0x%02x\n",
|
|
stat0, err, lsb, msb);
|
|
if (!(stat0 & ATA_S_BUSY)) {
|
|
if ((err & 0x7f) == ATA_E_ILI) {
|
|
if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB) {
|
|
ch->devices |= ATA_ATAPI_MASTER;
|
|
}
|
|
else if (stat0 & ATA_S_READY) {
|
|
ch->devices |= ATA_ATA_MASTER;
|
|
}
|
|
}
|
|
else if ((stat0 & 0x4f) && err == lsb && err == msb) {
|
|
stat0 |= ATA_S_BUSY;
|
|
}
|
|
}
|
|
}
|
|
if (!((mask == 0x03) && (stat0 & ATA_S_BUSY)) && (stat1 & ATA_S_BUSY)) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE);
|
|
DELAY(10);
|
|
err = ATA_IDX_INB(ch, ATA_ERROR);
|
|
lsb = ATA_IDX_INB(ch, ATA_CYL_LSB);
|
|
msb = ATA_IDX_INB(ch, ATA_CYL_MSB);
|
|
stat1 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if (bootverbose)
|
|
ata_printf(ch, ATA_SLAVE,
|
|
" stat=0x%02x err=0x%02x lsb=0x%02x msb=0x%02x\n",
|
|
stat1, err, lsb, msb);
|
|
if (!(stat1 & ATA_S_BUSY)) {
|
|
if ((err & 0x7f) == ATA_E_ILI) {
|
|
if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB) {
|
|
ch->devices |= ATA_ATAPI_SLAVE;
|
|
}
|
|
else if (stat1 & ATA_S_READY) {
|
|
ch->devices |= ATA_ATA_SLAVE;
|
|
}
|
|
}
|
|
else if ((stat1 & 0x4f) && err == lsb && err == msb) {
|
|
stat1 |= ATA_S_BUSY;
|
|
}
|
|
}
|
|
}
|
|
if (mask == 0x01) /* wait for master only */
|
|
if (!(stat0 & ATA_S_BUSY) || (stat0 == 0xff && timeout > 20))
|
|
break;
|
|
if (mask == 0x02) /* wait for slave only */
|
|
if (!(stat1 & ATA_S_BUSY) || (stat1 == 0xff && timeout > 20))
|
|
break;
|
|
if (mask == 0x03) { /* wait for both master & slave */
|
|
if (!(stat0 & ATA_S_BUSY) && !(stat1 & ATA_S_BUSY))
|
|
break;
|
|
if (stat0 == 0xff && timeout > 20)
|
|
mask &= ~0x01;
|
|
if (stat1 == 0xff && timeout > 20)
|
|
mask &= ~0x02;
|
|
}
|
|
DELAY(100000);
|
|
}
|
|
|
|
if (stat0 & ATA_S_BUSY)
|
|
mask &= ~0x01;
|
|
if (stat1 & ATA_S_BUSY)
|
|
mask &= ~0x02;
|
|
|
|
if (bootverbose)
|
|
ata_printf(ch, -1,
|
|
"reset tp2 mask=%02x stat0=%02x stat1=%02x devices=0x%b\n",
|
|
mask, stat0, stat1, ch->devices,
|
|
"\20\4ATAPI_SLAVE\3ATAPI_MASTER\2ATA_SLAVE\1ATA_MASTER");
|
|
}
|
|
|
|
static int
|
|
ata_wait(struct ata_device *atadev, u_int8_t mask)
|
|
{
|
|
u_int8_t status;
|
|
int timeout = 0;
|
|
|
|
DELAY(1);
|
|
|
|
/* wait 5 seconds for device to get !BUSY */
|
|
while (timeout < 5000000) {
|
|
status = ATA_IDX_INB(atadev->channel, ATA_STATUS);
|
|
|
|
/* if drive fails status, reselect the drive just to be sure */
|
|
if (status == 0xff) {
|
|
ata_prtdev(atadev, "WARNING no status, reselecting device\n");
|
|
ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit);
|
|
DELAY(10);
|
|
status = ATA_IDX_INB(atadev->channel, ATA_STATUS);
|
|
if (status == 0xff)
|
|
return -1;
|
|
}
|
|
|
|
/* are we done ? */
|
|
if (!(status & ATA_S_BUSY))
|
|
break;
|
|
|
|
if (timeout > 1000) {
|
|
timeout += 1000;
|
|
DELAY(1000);
|
|
}
|
|
else {
|
|
timeout += 10;
|
|
DELAY(10);
|
|
}
|
|
}
|
|
if (timeout >= 5000000)
|
|
return -1;
|
|
if (!mask)
|
|
return (status & ATA_S_ERROR);
|
|
|
|
DELAY(1);
|
|
|
|
/* wait 50 msec for bits wanted */
|
|
timeout = 5000;
|
|
while (timeout--) {
|
|
status = ATA_IDX_INB(atadev->channel, ATA_STATUS);
|
|
if ((status & mask) == mask)
|
|
return (status & ATA_S_ERROR);
|
|
DELAY (10);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
ata_command(struct ata_device *atadev, u_int8_t command,
|
|
u_int64_t lba, u_int16_t count, u_int16_t feature)
|
|
{
|
|
if (atadebug)
|
|
ata_prtdev(atadev, "ata_command: addr=%04lx, command=%02x, "
|
|
"lba=%jd, count=%d, feature=%d\n",
|
|
rman_get_start(atadev->channel->r_io[ATA_DATA].res),
|
|
command, (intmax_t)lba, count, feature);
|
|
|
|
/* select device */
|
|
ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit);
|
|
|
|
/* ready to issue command ? */
|
|
if (ata_wait(atadev, 0) < 0) {
|
|
ata_prtdev(atadev, "timeout sending command=%02x\n", command);
|
|
return -1;
|
|
}
|
|
|
|
/* enable interrupt */
|
|
ATA_IDX_OUTB(atadev->channel, ATA_ALTSTAT, ATA_A_4BIT);
|
|
|
|
/* only use 48bit addressing if needed (avoid bugs and overhead) */
|
|
if ((lba > 268435455 || count > 256) && atadev->param &&
|
|
atadev->param->support.command2 & ATA_SUPPORT_ADDRESS48) {
|
|
|
|
/* translate command into 48bit version */
|
|
switch (command) {
|
|
case ATA_READ:
|
|
command = ATA_READ48; break;
|
|
case ATA_READ_MUL:
|
|
command = ATA_READ_MUL48; break;
|
|
case ATA_READ_DMA:
|
|
command = ATA_READ_DMA48; break;
|
|
case ATA_READ_DMA_QUEUED:
|
|
command = ATA_READ_DMA_QUEUED48; break;
|
|
case ATA_WRITE:
|
|
command = ATA_WRITE48; break;
|
|
case ATA_WRITE_MUL:
|
|
command = ATA_WRITE_MUL48; break;
|
|
case ATA_WRITE_DMA:
|
|
command = ATA_WRITE_DMA48; break;
|
|
case ATA_WRITE_DMA_QUEUED:
|
|
command = ATA_WRITE_DMA_QUEUED48; break;
|
|
case ATA_FLUSHCACHE:
|
|
command = ATA_FLUSHCACHE48; break;
|
|
default:
|
|
ata_prtdev(atadev, "can't translate cmd to 48bit version\n");
|
|
return -1;
|
|
}
|
|
ATA_IDX_OUTB(atadev->channel, ATA_FEATURE, (feature>>8) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_FEATURE, feature & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_COUNT, (count>>8) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_COUNT, count & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_SECTOR, (lba>>24) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_SECTOR, lba & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CYL_LSB, (lba>>32) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CYL_LSB, (lba>>8) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CYL_MSB, (lba>>40) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CYL_MSB, (lba>>16) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_LBA | atadev->unit);
|
|
atadev->channel->flags |= ATA_48BIT_ACTIVE;
|
|
}
|
|
else {
|
|
ATA_IDX_OUTB(atadev->channel, ATA_FEATURE, feature);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_COUNT, count);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_SECTOR, lba & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CYL_LSB, (lba>>8) & 0xff);
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CYL_MSB, (lba>>16) & 0xff);
|
|
if (atadev->flags & ATA_D_USE_CHS)
|
|
ATA_IDX_OUTB(atadev->channel, ATA_DRIVE,
|
|
ATA_D_IBM | atadev->unit | ((lba>>24) & 0xf));
|
|
else
|
|
ATA_IDX_OUTB(atadev->channel, ATA_DRIVE,
|
|
ATA_D_IBM | ATA_D_LBA | atadev->unit|((lba>>24)&0xf));
|
|
atadev->channel->flags &= ~ATA_48BIT_ACTIVE;
|
|
}
|
|
|
|
/* issue command to controller */
|
|
ATA_IDX_OUTB(atadev->channel, ATA_CMD, command);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ata_pio_read(struct ata_request *request, int length)
|
|
{
|
|
int size = min(request->transfersize, length);
|
|
struct ata_channel *ch = request->device->channel;
|
|
int resid;
|
|
|
|
if (ch->flags & ATA_USE_16BIT || (size % sizeof(int32_t)))
|
|
ATA_IDX_INSW_STRM(ch, ATA_DATA,
|
|
(void*)((uintptr_t)request->data+request->donecount),
|
|
size / sizeof(int16_t));
|
|
else
|
|
ATA_IDX_INSL_STRM(ch, ATA_DATA,
|
|
(void*)((uintptr_t)request->data+request->donecount),
|
|
size / sizeof(int32_t));
|
|
|
|
if (request->transfersize < length) {
|
|
ata_prtdev(request->device, "WARNING - %s read data overrun %d>%d\n",
|
|
ata_cmd2str(request), length, request->transfersize);
|
|
for (resid = request->transfersize; resid < length;
|
|
resid += sizeof(int16_t))
|
|
ATA_IDX_INW(ch, ATA_DATA);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ata_pio_write(struct ata_request *request, int length)
|
|
{
|
|
int size = min(request->transfersize, length);
|
|
struct ata_channel *ch = request->device->channel;
|
|
int resid;
|
|
|
|
if (ch->flags & ATA_USE_16BIT || (size % sizeof(int32_t)))
|
|
ATA_IDX_OUTSW_STRM(ch, ATA_DATA,
|
|
(void*)((uintptr_t)request->data+request->donecount),
|
|
size / sizeof(int16_t));
|
|
else
|
|
ATA_IDX_OUTSL_STRM(ch, ATA_DATA,
|
|
(void*)((uintptr_t)request->data+request->donecount),
|
|
size / sizeof(int32_t));
|
|
|
|
if (request->transfersize < length) {
|
|
ata_prtdev(request->device, "WARNING - %s write data underrun %d>%d\n",
|
|
ata_cmd2str(request), length, request->transfersize);
|
|
for (resid = request->transfersize; resid < length;
|
|
resid += sizeof(int16_t))
|
|
ATA_IDX_OUTW(ch, ATA_DATA, 0);
|
|
}
|
|
}
|