freebsd-nq/sys/mips/rt305x/rt305x_gpio.h
Adrian Chadd f7a5c9d346 Import the initial CPU support for the MIPS RALink RT305x SoC.
This is a MIPS4KC CPU with various embedded peripherals, including
wireless and ethernet support.

This commit includes the platform, UART, ethernet MAC and GPIO support.
The interrupt-driven GPIO code is disabled for now pending GPIO changes
from the submitter.

Submitted by:	Aleksandr Rybalko <ray@dlink.ua>
2011-04-03 14:39:55 +00:00

112 lines
4.4 KiB
C

/*-
* Copyright (c) 2010 Aleksandr Rybalko.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _RT305X_GPIO_H_
#define _RT305X_GPIO_H_
#define NGPIO 52
#define RGMII_GPIO_MODE_MASK (0x0fffULL<<40)
#define SDRAM_GPIO_MODE_MASK (0xffffULL<<24)
#define MDIO_GPIO_MODE_MASK (0x0003ULL<<22)
#define JTAG_GPIO_MODE_MASK (0x001fULL<<17)
#define UARTL_GPIO_MODE_MASK (0x0003ULL<<15)
#define UARTF_GPIO_MODE_MASK (0x00ffULL<<7)
#define SPI_GPIO_MODE_MASK (0x000fULL<<3)
#define I2C_GPIO_MODE_MASK (0x0003ULL<<1)
#define GPIO23_00_INT 0x00 /* Programmed I/O Int Status */
#define GPIO23_00_EDGE 0x04 /* Programmed I/O Edge Status */
#define GPIO23_00_RENA 0x08 /* Programmed I/O Int on Rising */
#define GPIO23_00_FENA 0x0C /* Programmed I/O Int on Falling */
#define GPIO23_00_DATA 0x20 /* Programmed I/O Data */
#define GPIO23_00_DIR 0x24 /* Programmed I/O Direction */
#define GPIO23_00_POL 0x28 /* Programmed I/O Pin Polarity */
#define GPIO23_00_SET 0x2C /* Set PIO Data Bit */
#define GPIO23_00_RESET 0x30 /* Clear PIO Data bit */
#define GPIO23_00_TOG 0x34 /* Toggle PIO Data bit */
#define GPIO39_24_INT 0x38
#define GPIO39_24_EDGE 0x3c
#define GPIO39_24_RENA 0x40
#define GPIO39_24_FENA 0x44
#define GPIO39_24_DATA 0x48
#define GPIO39_24_DIR 0x4c
#define GPIO39_24_POL 0x50
#define GPIO39_24_SET 0x54
#define GPIO39_24_RESET 0x58
#define GPIO39_24_TOG 0x5c
#define GPIO51_40_INT 0x60
#define GPIO51_40_EDGE 0x64
#define GPIO51_40_RENA 0x68
#define GPIO51_40_FENA 0x6C
#define GPIO51_40_DATA 0x70
#define GPIO51_40_DIR 0x74
#define GPIO51_40_POL 0x78
#define GPIO51_40_SET 0x7C
#define GPIO51_40_RESET 0x80
#define GPIO51_40_TOG 0x84
#define GPIO_REG(g, n) \
((g<24)?(GPIO23_00_##n):(g<40)?(GPIO39_24_##n):(GPIO51_40_##n))
#define GPIO_MASK(g) \
((g<24)?(1<<g):(g<40)?(1<<(g-24)):(1<<(g-40)))
#define GPIO_BIT_SHIFT(g) ((g<24)?(g):(g<40)?(g-24):(g-40))
#define GPIO_READ(r, g, n) \
bus_read_4(r->gpio_mem_res, GPIO_REG(g, n))
#define GPIO_WRITE(r, g, n, v) \
bus_write_4(r->gpio_mem_res, GPIO_REG(g, n), v)
#define GPIO_READ_ALL(r, n) \
(((uint64_t)bus_read_4(r->gpio_mem_res, GPIO23_00_##n)) | \
(((uint64_t)bus_read_4(r->gpio_mem_res, GPIO39_24_##n)) << 24) |\
(((uint64_t)bus_read_4(r->gpio_mem_res, GPIO51_40_##n)) << 40))
#define GPIO_WRITE_ALL(r, n, v) \
{bus_write_4(r->gpio_mem_res,GPIO23_00_##n, v &0x00ffffff);\
bus_write_4(r->gpio_mem_res, GPIO39_24_##n, (v>>24)&0x0000ffff);\
bus_write_4(r->gpio_mem_res, GPIO51_40_##n, (v>>40)&0x00000fff);}
#define GPIO_BIT_CLR(r, g, n) \
bus_write_4(r->gpio_mem_res, GPIO_REG(g, n), \
bus_read_4(r->gpio_mem_res, GPIO_REG(g, n)) & ~GPIO_MASK(g))
#define GPIO_BIT_SET(r, g, n) \
bus_write_4(r->gpio_mem_res, GPIO_REG(g, n), \
bus_read_4(r->gpio_mem_res, GPIO_REG(g, n)) | GPIO_MASK(g))
#define GPIO_BIT_GET(r, g, n) \
((bus_read_4(r->gpio_mem_res, GPIO_REG(g, n)) >> \
GPIO_BIT_SHIFT(g)) & 1)
#define GPIO_LOCK(_sc) mtx_lock(&(_sc)->gpio_mtx)
#define GPIO_UNLOCK(_sc) mtx_unlock(&(_sc)->gpio_mtx)
#define GPIO_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->gpio_mtx, MA_OWNED)
#endif /* _RT305X_GPIO_H_ */