freebsd-nq

History

Doug Rabson f7b7769172 * Factor out the object system from new-bus so that it can be used by

non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.

2000-04-08 14:17:18 +00:00

advansys

Newbusify adv driver.

2000-04-07 11:32:42 +00:00

aha

More pnpids.

2000-03-25 03:24:43 +00:00

ahb

Remove #include "eisa.h" and #if NEISA > 0

2000-01-29 18:22:33 +00:00

aic

- Added PC-98 Cbus frontend.

2000-03-29 14:32:34 +00:00

aic7xxx

o Correct the offsets into the syncrate table for paritcular

2000-03-18 22:28:20 +00:00

amd

Newbusify amd driver.

2000-04-07 11:36:11 +00:00

amr

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

Fix an instance of rman_get_start() than should be rman_get_bushandle().

2000-01-16 06:41:49 +00:00

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

ata

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

atkbdc

- Add temporary workaround to fool some "clever" KVM switch products

2000-04-02 08:28:21 +00:00

awi

Awi driver, ported from NetBSD from Atsushi Once-san.

2000-04-06 02:48:48 +00:00

bktr

Upgrade the bktr driver from 2.07 to 2.10.

2000-04-04 16:54:13 +00:00

buslogic

Remove #include "eisa.h" and #if NEISA > 0 - this is guaranteed by config.

2000-01-29 14:27:26 +00:00

cardbus

Sync to latest cardbusdevs file

1999-11-18 07:22:59 +00:00

ccd

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

NewBus the cs driver.

2000-03-30 05:16:16 +00:00

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

Teach the 'dc' driver how to pick up settings left over by the

2000-03-11 05:20:56 +00:00

A fairly simple newbusification of if_de

2000-03-20 09:18:46 +00:00

dec

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

dgb

Remove #if NDGB > 0 and #if NDGM > 0

2000-01-29 18:42:45 +00:00

dpt

Use correct offset into register window.

2000-04-07 07:29:31 +00:00

Bogusly returned zero always. Return 1 if we pass the checksum.

2000-03-20 23:29:27 +00:00

eisa

Pre 4.0 tidy up.

2000-01-14 07:14:17 +00:00

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

Fix a problem that caused TCP fragments to be lost (among other things.)

2000-03-24 23:31:42 +00:00

Add 'bootverbose' debug messages to assist with tracking down problems

2000-03-13 12:27:21 +00:00

Remove #include "vga.h" and #if NVGA > 0 as it's implied by config.

2000-01-29 14:43:47 +00:00

fdc

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

Ratoc REX-9880/83 support (PC-98 only). This commit added functions

2000-03-29 12:44:19 +00:00

fxp

Added support for cards and on-motherboard NICs that use an SEEPROM

2000-03-28 04:41:42 +00:00

hea

Remove un-needed #include's.

2000-01-17 20:49:59 +00:00

hfa

Ensure that DMA mappings are freed in error situations.

2000-01-15 21:01:04 +00:00

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ida

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

Remove #if NIE > 0 test, it's guaranteed to be true by config.

2000-01-29 14:41:52 +00:00

iicbus

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

isp

roll platform versions to 5.0

2000-03-15 18:49:44 +00:00

joy

Add ADS7182 as a known Joystick.

2000-01-18 08:38:35 +00:00

kbd

- Properly keep track of I/O port resources.

2000-03-19 03:25:13 +00:00

lnc

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

mc146818

…

mca

Set the RF_SHAREABLE flage when we allocate an IRQ.

2000-03-13 11:43:53 +00:00

mcd

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new

2000-03-20 10:44:49 +00:00

mii

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

mlx

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

mse

- `Newbus'ified the driver.

2000-03-18 15:13:30 +00:00

pccard

Fix pcic_detach_socket to get right pcic_handle.

2000-04-04 04:12:43 +00:00

pcf

Port of ppbus standalone framework to the newbus system.

2000-01-14 00:18:06 +00:00

pci

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

pcic

Fix pcic_detach_socket to get right pcic_handle.

2000-04-04 04:12:43 +00:00

pdq

Pre 4.0 tidy up.

2000-01-14 07:14:17 +00:00

ppbus

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

ppc

Remove #include "ppc.h" and #if NPPC > 0 - this is always true as it is

2000-01-29 14:02:30 +00:00

ray

Fix mbuf leaking - duh!

2000-04-04 06:43:30 +00:00

Remove #if NFOO > 0 (it's not required in most cases) and also where it

2000-01-29 16:00:34 +00:00

Introduce ttyread() and ttywrite() which do the canonical thing.

1999-09-28 11:45:31 +00:00

scd

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

Modify the Adaptec "starfire" driver to reset the PHY on the MII bus

1999-12-05 20:02:45 +00:00

Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really*

2000-01-25 16:45:54 +00:00

sio

Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This

2000-04-01 06:14:21 +00:00

Call sk_start() at the end of sk_intr() if there's packets in the

1999-09-25 04:50:27 +00:00

smbus

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

Don't execute MAC address initialization for non-pccard sn devices.

2000-01-22 17:24:16 +00:00

snp

Unstaticize this driver. You can have as many snoop devices as you can

2000-04-02 00:35:37 +00:00

sound

make poll() dtrt, previously when playing it would trigger if there was less

2000-04-05 05:54:02 +00:00

speaker

Remove #if NFOO > 0 (it's not required in most cases) and also where it

2000-01-29 16:00:34 +00:00

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

streams

Rename remove_dev() to destroy_dev().

1999-11-08 07:44:01 +00:00

sym

This new driver version uses the DMA mapping interface

2000-04-02 10:07:54 +00:00

syscons

Unbreak LINT.

2000-04-03 09:24:16 +00:00

Add support for offloading IP/TCP/UDP checksums to NIC hardware which

2000-03-27 19:14:27 +00:00

Change incorrect NULLs to 0s

1999-12-21 11:14:12 +00:00

usb

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

vinum

open_drive: Add kludges for vn and md.

2000-04-06 07:25:35 +00:00

Move B_ERROR flag to b_ioflags and call it BIO_ERROR.

2000-04-02 15:24:56 +00:00

Change contigmalloc() lower memory bound from 1MB to 0 to improve

1999-09-25 17:29:02 +00:00

Remove #if NVX > 0 and #if NEISA > 0 (and #include "eisa.h") as it's not

2000-01-29 14:50:32 +00:00

Modify if_wi.c to call bpfdetach(ifp) before if_detach(ifp), so as to

2000-03-19 05:46:50 +00:00

Remove NBPF conditionality of bpf calls in most of our network drivers.

1999-09-25 12:06:01 +00:00

Remove #if 0'ed reference to isa_device->id_alive

2000-01-23 18:21:20 +00:00