8eb6488ebb
Includes: - Support for X550EM devices. - Support for Bypass adapters. - Flow Director code moved to separate files - SR-IOV code moved to separate files - Netmap code moved to separate files Differential Revision: https://reviews.freebsd.org/D11232 Submitted by: Jeb Cramer <cramerj@intel.com> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.e.pieper@intel.com> Sponsored by: Intel Corporation
220 lines
9.0 KiB
C
220 lines
9.0 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2017, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
#ifndef _IXGBE_PHY_H_
|
|
#define _IXGBE_PHY_H_
|
|
|
|
#include "ixgbe_type.h"
|
|
#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
|
|
#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2
|
|
#define IXGBE_I2C_EEPROM_BANK_LEN 0xFF
|
|
|
|
/* EEPROM byte offsets */
|
|
#define IXGBE_SFF_IDENTIFIER 0x0
|
|
#define IXGBE_SFF_IDENTIFIER_SFP 0x3
|
|
#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
|
|
#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
|
|
#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
|
|
#define IXGBE_SFF_1GBE_COMP_CODES 0x6
|
|
#define IXGBE_SFF_10GBE_COMP_CODES 0x3
|
|
#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
|
|
#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
|
|
#define IXGBE_SFF_SFF_8472_SWAP 0x5C
|
|
#define IXGBE_SFF_SFF_8472_COMP 0x5E
|
|
#define IXGBE_SFF_SFF_8472_OSCB 0x6E
|
|
#define IXGBE_SFF_SFF_8472_ESCB 0x76
|
|
#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS 0xD
|
|
#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5
|
|
#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6
|
|
#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7
|
|
#define IXGBE_SFF_QSFP_CONNECTOR 0x82
|
|
#define IXGBE_SFF_QSFP_10GBE_COMP 0x83
|
|
#define IXGBE_SFF_QSFP_1GBE_COMP 0x86
|
|
#define IXGBE_SFF_QSFP_CABLE_LENGTH 0x92
|
|
#define IXGBE_SFF_QSFP_DEVICE_TECH 0x93
|
|
|
|
/* Bitmasks */
|
|
#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
|
|
#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8
|
|
#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4
|
|
#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
|
|
#define IXGBE_SFF_1GBASELX_CAPABLE 0x2
|
|
#define IXGBE_SFF_1GBASET_CAPABLE 0x8
|
|
#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
|
|
#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
|
|
#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8
|
|
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
|
|
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
|
|
#define IXGBE_SFF_ADDRESSING_MODE 0x4
|
|
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
|
|
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
|
|
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
|
|
#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL 0x0
|
|
#define IXGBE_I2C_EEPROM_READ_MASK 0x100
|
|
#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
|
|
#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
|
|
#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
|
|
#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
|
|
#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
|
|
|
|
#define IXGBE_CS4227 0xBE /* CS4227 address */
|
|
#define IXGBE_CS4227_GLOBAL_ID_LSB 0
|
|
#define IXGBE_CS4227_GLOBAL_ID_MSB 1
|
|
#define IXGBE_CS4227_SCRATCH 2
|
|
#define IXGBE_CS4227_GLOBAL_ID_VALUE 0x03E5
|
|
#define IXGBE_CS4227_EFUSE_PDF_SKU 0x19F
|
|
#define IXGBE_CS4223_SKU_ID 0x0010 /* Quad port */
|
|
#define IXGBE_CS4227_SKU_ID 0x0014 /* Dual port */
|
|
#define IXGBE_CS4227_RESET_PENDING 0x1357
|
|
#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5
|
|
#define IXGBE_CS4227_RETRIES 15
|
|
#define IXGBE_CS4227_EFUSE_STATUS 0x0181
|
|
#define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to program speed */
|
|
#define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to program EDC */
|
|
#define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to program speed */
|
|
#define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */
|
|
#define IXGBE_CS4227_EEPROM_STATUS 0x5001
|
|
#define IXGBE_CS4227_EEPROM_LOAD_OK 0x0001
|
|
#define IXGBE_CS4227_SPEED_1G 0x8000
|
|
#define IXGBE_CS4227_SPEED_10G 0
|
|
#define IXGBE_CS4227_EDC_MODE_CX1 0x0002
|
|
#define IXGBE_CS4227_EDC_MODE_SR 0x0004
|
|
#define IXGBE_CS4227_EDC_MODE_DIAG 0x0008
|
|
#define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */
|
|
#define IXGBE_CS4227_RESET_DELAY 450 /* milliseconds */
|
|
#define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */
|
|
#define IXGBE_PE 0xE0 /* Port expander address */
|
|
#define IXGBE_PE_OUTPUT 1 /* Output register offset */
|
|
#define IXGBE_PE_CONFIG 3 /* Config register offset */
|
|
#define IXGBE_PE_BIT1 (1 << 1)
|
|
|
|
/* Flow control defines */
|
|
#define IXGBE_TAF_SYM_PAUSE 0x400
|
|
#define IXGBE_TAF_ASM_PAUSE 0x800
|
|
|
|
/* Bit-shift macros */
|
|
#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
|
|
#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
|
|
#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
|
|
|
|
/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
|
|
#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
|
|
#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
|
|
#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
|
|
#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
|
|
|
|
/* I2C SDA and SCL timing parameters for standard mode */
|
|
#define IXGBE_I2C_T_HD_STA 4
|
|
#define IXGBE_I2C_T_LOW 5
|
|
#define IXGBE_I2C_T_HIGH 4
|
|
#define IXGBE_I2C_T_SU_STA 5
|
|
#define IXGBE_I2C_T_HD_DATA 5
|
|
#define IXGBE_I2C_T_SU_DATA 1
|
|
#define IXGBE_I2C_T_RISE 1
|
|
#define IXGBE_I2C_T_FALL 1
|
|
#define IXGBE_I2C_T_SU_STO 4
|
|
#define IXGBE_I2C_T_BUF 5
|
|
|
|
#ifndef IXGBE_SFP_DETECT_RETRIES
|
|
#define IXGBE_SFP_DETECT_RETRIES 10
|
|
|
|
#endif /* IXGBE_SFP_DETECT_RETRIES */
|
|
#define IXGBE_TN_LASI_STATUS_REG 0x9005
|
|
#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008
|
|
|
|
/* SFP+ SFF-8472 Compliance */
|
|
#define IXGBE_SFF_SFF_8472_UNSUP 0x00
|
|
|
|
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
|
|
bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
|
|
enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
|
|
s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
|
|
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
|
|
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
|
|
s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
|
u16 *phy_data);
|
|
s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
|
u16 phy_data);
|
|
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 *phy_data);
|
|
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 phy_data);
|
|
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
|
|
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete);
|
|
s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed *speed,
|
|
bool *autoneg);
|
|
s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
|
|
|
|
/* PHY specific */
|
|
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed *speed,
|
|
bool *link_up);
|
|
s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
|
|
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
|
|
u16 *firmware_version);
|
|
s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
|
|
u16 *firmware_version);
|
|
|
|
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
|
|
s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on);
|
|
s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
|
|
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
|
|
u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw);
|
|
s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
|
|
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
|
|
u16 *list_offset,
|
|
u16 *data_offset);
|
|
s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw);
|
|
s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 *data);
|
|
s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 *data);
|
|
s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 data);
|
|
s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 data);
|
|
s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *eeprom_data);
|
|
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 eeprom_data);
|
|
void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
|
|
s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
|
|
u16 *val, bool lock);
|
|
s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
|
|
u16 val, bool lock);
|
|
#endif /* _IXGBE_PHY_H_ */
|