freebsd-nq/sys/netinet6/in6_proto.c
Bjoern A. Zeeb 21231a7aa6 Update for IETF draft-ietf-6man-ipv6only-flag.
All changes are hidden behind the EXPERIMENTAL option and are not compiled
in by default.

Add ND6_IFF_IPV6_ONLY_MANUAL to be able to set the interface into no-IPv4-mode
manually without router advertisement options.  This will allow developers to
test software for the appropriate behaviour even on dual-stack networks or
IPv6-Only networks without the option being set in RA messages.
Update ifconfig to allow setting and displaying the flag.

Update the checks for the filters to check for either the automatic or the manual
flag to be set.  Add REVARP to the list of filtered IPv4-related protocols and add
an input filter similar to the output filter.

Add a check, when receiving the IPv6-Only RA flag to see if the receiving
interface has any IPv4 configured.  If it does, ignore the IPv6-Only flag.

Add a per-VNET global sysctl, which is on by default, to not process the automatic
RA IPv6-Only flag.  This way an administrator (if this is compiled in) has control
over the behaviour in case the node still relies on IPv4.
2019-03-06 23:31:42 +00:00

651 lines
23 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $KAME: in6_proto.c,v 1.91 2001/05/27 13:28:35 itojun Exp $
*/
/*-
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_proto.c 8.1 (Berkeley) 6/10/93
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include "opt_ipstealth.h"
#include "opt_sctp.h"
#include "opt_mpath.h"
#include "opt_route.h"
#include <sys/param.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/jail.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/domain.h>
#include <sys/mbuf.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/radix.h>
#include <net/route.h>
#ifdef RADIX_MPATH
#include <net/radix_mpath.h>
#endif
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip_encap.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet/icmp6.h>
#include <netinet/tcp.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet6/tcp6_var.h>
#include <netinet6/raw_ip6.h>
#include <netinet6/udp6_var.h>
#include <netinet6/pim6_var.h>
#include <netinet6/nd6.h>
#ifdef SCTP
#include <netinet/in_pcb.h>
#include <netinet/sctp_pcb.h>
#include <netinet/sctp.h>
#include <netinet/sctp_var.h>
#include <netinet6/sctp6_var.h>
#endif /* SCTP */
#include <netinet6/ip6protosw.h>
/*
* TCP/IP protocol family: IP6, ICMP6, UDP, TCP.
*/
FEATURE(inet6, "Internet Protocol version 6");
extern struct domain inet6domain;
static struct pr_usrreqs nousrreqs;
#define PR_LISTEN 0
#define PR_ABRTACPTDIS 0
/* Spacer for loadable protocols. */
#define IP6PROTOSPACER \
{ \
.pr_domain = &inet6domain, \
.pr_protocol = PROTO_SPACER, \
.pr_usrreqs = &nousrreqs \
}
struct protosw inet6sw[] = {
{
.pr_type = 0,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_IPV6,
.pr_init = ip6_init,
.pr_slowtimo = frag6_slowtimo,
.pr_drain = frag6_drain,
.pr_usrreqs = &nousrreqs,
},
{
.pr_type = SOCK_DGRAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_UDP,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = udp6_input,
.pr_ctlinput = udp6_ctlinput,
.pr_ctloutput = ip6_ctloutput,
#ifndef INET /* Do not call initialization twice. */
.pr_init = udp_init,
#endif
.pr_usrreqs = &udp6_usrreqs,
},
{
.pr_type = SOCK_STREAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_TCP,
.pr_flags = PR_CONNREQUIRED|PR_IMPLOPCL|PR_WANTRCVD|PR_LISTEN,
.pr_input = tcp6_input,
.pr_ctlinput = tcp6_ctlinput,
.pr_ctloutput = tcp_ctloutput,
#ifndef INET /* don't call initialization and timeout routines twice */
.pr_init = tcp_init,
.pr_slowtimo = tcp_slowtimo,
#endif
.pr_drain = tcp_drain,
.pr_usrreqs = &tcp6_usrreqs,
},
#ifdef SCTP
{
.pr_type = SOCK_SEQPACKET,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_SCTP,
.pr_flags = PR_WANTRCVD|PR_LASTHDR,
.pr_input = sctp6_input,
.pr_ctlinput = sctp6_ctlinput,
.pr_ctloutput = sctp_ctloutput,
.pr_drain = sctp_drain,
#ifndef INET /* Do not call initialization twice. */
.pr_init = sctp_init,
#endif
.pr_usrreqs = &sctp6_usrreqs
},
{
.pr_type = SOCK_STREAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_SCTP,
.pr_flags = PR_CONNREQUIRED|PR_WANTRCVD|PR_LASTHDR,
.pr_input = sctp6_input,
.pr_ctlinput = sctp6_ctlinput,
.pr_ctloutput = sctp_ctloutput,
.pr_drain = sctp_drain,
.pr_usrreqs = &sctp6_usrreqs
},
#endif /* SCTP */
{
.pr_type = SOCK_DGRAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_UDPLITE,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = udp6_input,
.pr_ctlinput = udplite6_ctlinput,
.pr_ctloutput = udp_ctloutput,
#ifndef INET /* Do not call initialization twice. */
.pr_init = udplite_init,
#endif
.pr_usrreqs = &udp6_usrreqs,
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_RAW,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = rip6_input,
.pr_output = rip6_output,
.pr_ctlinput = rip6_ctlinput,
.pr_ctloutput = rip6_ctloutput,
#ifndef INET /* Do not call initialization twice. */
.pr_init = rip_init,
#endif
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_ICMPV6,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = icmp6_input,
.pr_output = rip6_output,
.pr_ctlinput = rip6_ctlinput,
.pr_ctloutput = rip6_ctloutput,
.pr_fasttimo = icmp6_fasttimo,
.pr_slowtimo = icmp6_slowtimo,
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_DSTOPTS,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = dest6_input,
.pr_usrreqs = &nousrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_ROUTING,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = route6_input,
.pr_usrreqs = &nousrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_FRAGMENT,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = frag6_input,
.pr_usrreqs = &nousrreqs
},
#ifdef INET
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_IPV4,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
#endif /* INET */
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_IPV6,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_GRE,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_PIM,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
/* Spacer n-times for loadable protocols. */
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
/* raw wildcard */
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = rip6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
};
extern int in6_inithead(void **, int);
#ifdef VIMAGE
extern int in6_detachhead(void **, int);
#endif
struct domain inet6domain = {
.dom_family = AF_INET6,
.dom_name = "internet6",
.dom_protosw = (struct protosw *)inet6sw,
.dom_protoswNPROTOSW = (struct protosw *)&inet6sw[nitems(inet6sw)],
#ifdef RADIX_MPATH
.dom_rtattach = rn6_mpath_inithead,
#else
.dom_rtattach = in6_inithead,
#endif
#ifdef VIMAGE
.dom_rtdetach = in6_detachhead,
#endif
.dom_ifattach = in6_domifattach,
.dom_ifdetach = in6_domifdetach,
.dom_ifmtu = in6_domifmtu
};
VNET_DOMAIN_SET(inet6);
/*
* Internet configuration info
*/
#ifndef IPV6FORWARDING
#ifdef GATEWAY6
#define IPV6FORWARDING 1 /* forward IP6 packets not for us */
#else
#define IPV6FORWARDING 0 /* don't forward IP6 packets not for us */
#endif /* GATEWAY6 */
#endif /* !IPV6FORWARDING */
#ifndef IPV6_SENDREDIRECTS
#define IPV6_SENDREDIRECTS 1
#endif
VNET_DEFINE(int, ip6_forwarding) = IPV6FORWARDING; /* act as router? */
VNET_DEFINE(int, ip6_sendredirects) = IPV6_SENDREDIRECTS;
VNET_DEFINE(int, ip6_defhlim) = IPV6_DEFHLIM;
VNET_DEFINE(int, ip6_defmcasthlim) = IPV6_DEFAULT_MULTICAST_HOPS;
VNET_DEFINE(int, ip6_accept_rtadv) = 0;
VNET_DEFINE(int, ip6_no_radr) = 0;
VNET_DEFINE(int, ip6_norbit_raif) = 0;
VNET_DEFINE(int, ip6_rfc6204w3) = 0;
VNET_DEFINE(int, ip6_maxfragpackets); /* initialized in frag6.c:frag6_init() */
int ip6_maxfrags; /* initialized in frag6.c:frag6_init() */
VNET_DEFINE(int, ip6_maxfragbucketsize);/* initialized in frag6.c:frag6_init() */
VNET_DEFINE(int, ip6_maxfragsperpacket); /* initialized in frag6.c:frag6_init() */
VNET_DEFINE(int, ip6_log_interval) = 5;
VNET_DEFINE(int, ip6_hdrnestlimit) = 15;/* How many header options will we
* process? */
VNET_DEFINE(int, ip6_dad_count) = 1; /* DupAddrDetectionTransmits */
VNET_DEFINE(int, ip6_auto_flowlabel) = 1;
VNET_DEFINE(int, ip6_use_deprecated) = 1;/* allow deprecated addr
* (RFC2462 5.5.4) */
VNET_DEFINE(int, ip6_rr_prune) = 5; /* router renumbering prefix
* walk list every 5 sec. */
VNET_DEFINE(int, ip6_mcast_pmtu) = 0; /* enable pMTU discovery for multicast? */
VNET_DEFINE(int, ip6_v6only) = 1;
VNET_DEFINE(time_t, ip6_log_time) = (time_t)0L;
#ifdef IPSTEALTH
VNET_DEFINE(int, ip6stealth) = 0;
#endif
VNET_DEFINE(int, nd6_onlink_ns_rfc4861) = 0;/* allow 'on-link' nd6 NS
* (RFC 4861) */
/* icmp6 */
/*
* BSDI4 defines these variables in in_proto.c...
* XXX: what if we don't define INET? Should we define pmtu6_expire
* or so? (jinmei@kame.net 19990310)
*/
VNET_DEFINE(int, pmtu_expire) = 60*10;
VNET_DEFINE(int, pmtu_probe) = 60*2;
/* ICMPV6 parameters */
VNET_DEFINE(int, icmp6_rediraccept) = 1;/* accept and process redirects */
VNET_DEFINE(int, icmp6_redirtimeout) = 10 * 60; /* 10 minutes */
VNET_DEFINE(int, icmp6errppslim) = 100; /* 100pps */
/* control how to respond to NI queries */
VNET_DEFINE(int, icmp6_nodeinfo) =
(ICMP6_NODEINFO_FQDNOK|ICMP6_NODEINFO_NODEADDROK);
VNET_DEFINE(int, icmp6_nodeinfo_oldmcprefix) = 1;
/*
* sysctl related items.
*/
SYSCTL_NODE(_net, PF_INET6, inet6, CTLFLAG_RW, 0,
"Internet6 Family");
/* net.inet6 */
SYSCTL_NODE(_net_inet6, IPPROTO_IPV6, ip6, CTLFLAG_RW, 0, "IP6");
SYSCTL_NODE(_net_inet6, IPPROTO_ICMPV6, icmp6, CTLFLAG_RW, 0, "ICMP6");
SYSCTL_NODE(_net_inet6, IPPROTO_UDP, udp6, CTLFLAG_RW, 0, "UDP6");
SYSCTL_NODE(_net_inet6, IPPROTO_TCP, tcp6, CTLFLAG_RW, 0, "TCP6");
#ifdef SCTP
SYSCTL_NODE(_net_inet6, IPPROTO_SCTP, sctp6, CTLFLAG_RW, 0, "SCTP6");
#endif
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
SYSCTL_NODE(_net_inet6, IPPROTO_ESP, ipsec6, CTLFLAG_RW, 0, "IPSEC6");
#endif /* IPSEC */
/* net.inet6.ip6 */
static int
sysctl_ip6_temppltime(SYSCTL_HANDLER_ARGS)
{
int error, val;
val = V_ip6_temp_preferred_lifetime;
error = sysctl_handle_int(oidp, &val, 0, req);
if (error != 0 || !req->newptr)
return (error);
if (val < V_ip6_desync_factor + V_ip6_temp_regen_advance)
return (EINVAL);
V_ip6_temp_preferred_lifetime = val;
return (0);
}
static int
sysctl_ip6_tempvltime(SYSCTL_HANDLER_ARGS)
{
int error, val;
val = V_ip6_temp_valid_lifetime;
error = sysctl_handle_int(oidp, &val, 0, req);
if (error != 0 || !req->newptr)
return (error);
if (val < V_ip6_temp_preferred_lifetime)
return (EINVAL);
V_ip6_temp_valid_lifetime = val;
return (0);
}
static int
sysctl_ip6_maxfragpackets(SYSCTL_HANDLER_ARGS)
{
int error, val;
val = V_ip6_maxfragpackets;
error = sysctl_handle_int(oidp, &val, 0, req);
if (error != 0 || !req->newptr)
return (error);
V_ip6_maxfragpackets = val;
frag6_set_bucketsize();
return (0);
}
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_FORWARDING, forwarding,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_forwarding), 0,
"Enable forwarding of IPv6 packets between interfaces");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_SENDREDIRECTS, redirect,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_sendredirects), 0,
"Send ICMPv6 redirects for unforwardable IPv6 packets");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_DEFHLIM, hlim,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_defhlim), 0,
"Default hop limit to use for outgoing IPv6 packets");
SYSCTL_VNET_PCPUSTAT(_net_inet6_ip6, IPV6CTL_STATS, stats, struct ip6stat,
ip6stat,
"IP6 statistics (struct ip6stat, netinet6/ip6_var.h)");
SYSCTL_PROC(_net_inet6_ip6, IPV6CTL_MAXFRAGPACKETS, maxfragpackets,
CTLFLAG_VNET | CTLTYPE_INT | CTLFLAG_RW, NULL, 0,
sysctl_ip6_maxfragpackets, "I",
"Default maximum number of outstanding fragmented IPv6 packets. "
"A value of 0 means no fragmented packets will be accepted, while a "
"a value of -1 means no limit");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_ACCEPT_RTADV, accept_rtadv,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_accept_rtadv), 0,
"Default value of per-interface flag for accepting ICMPv6 RA messages");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_NO_RADR, no_radr,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_no_radr), 0,
"Default value of per-interface flag to control whether routers "
"sending ICMPv6 RA messages on that interface are added into the "
"default router list");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_NORBIT_RAIF, norbit_raif,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_norbit_raif), 0,
"Always set clear the R flag in ICMPv6 NA messages when accepting RA "
"on the interface");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_RFC6204W3, rfc6204w3,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_rfc6204w3), 0,
"Accept the default router list from ICMPv6 RA messages even "
"when packet forwarding is enabled");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_LOG_INTERVAL, log_interval,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_log_interval), 0,
"Frequency in seconds at which to log IPv6 forwarding errors");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_HDRNESTLIMIT, hdrnestlimit,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_hdrnestlimit), 0,
"Default maximum number of IPv6 extension headers permitted on "
"incoming IPv6 packets, 0 for no artificial limit");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_DAD_COUNT, dad_count,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_dad_count), 0,
"Number of ICMPv6 NS messages sent during duplicate address detection");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_AUTO_FLOWLABEL, auto_flowlabel,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_auto_flowlabel), 0,
"Provide an IPv6 flowlabel in outbound packets");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_DEFMCASTHLIM, defmcasthlim,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_defmcasthlim), 0,
"Default hop limit for IPv6 multicast packets originating from this "
"node");
SYSCTL_STRING(_net_inet6_ip6, IPV6CTL_KAME_VERSION, kame_version,
CTLFLAG_RD, __KAME_VERSION, 0,
"KAME version string");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_USE_DEPRECATED, use_deprecated,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_use_deprecated), 0,
"Allow the use of addresses whose preferred lifetimes have expired");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_RR_PRUNE, rr_prune,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_rr_prune), 0,
""); /* XXX unused */
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_USETEMPADDR, use_tempaddr,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_use_tempaddr), 0,
"Create RFC3041 temporary addresses for autoconfigured addresses");
SYSCTL_PROC(_net_inet6_ip6, IPV6CTL_TEMPPLTIME, temppltime,
CTLFLAG_VNET | CTLTYPE_INT | CTLFLAG_RW,
NULL, 0, sysctl_ip6_temppltime, "I",
"Maximum preferred lifetime for temporary addresses");
SYSCTL_PROC(_net_inet6_ip6, IPV6CTL_TEMPVLTIME, tempvltime,
CTLFLAG_VNET | CTLTYPE_INT | CTLFLAG_RW,
NULL, 0, sysctl_ip6_tempvltime, "I",
"Maximum valid lifetime for temporary addresses");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_V6ONLY, v6only,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_v6only), 0,
"Restrict AF_INET6 sockets to IPv6 addresses only");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_AUTO_LINKLOCAL, auto_linklocal,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_auto_linklocal), 0,
"Default value of per-interface flag for automatically adding an IPv6 "
"link-local address to interfaces when attached");
SYSCTL_VNET_PCPUSTAT(_net_inet6_ip6, IPV6CTL_RIP6STATS, rip6stats,
struct rip6stat, rip6stat,
"Raw IP6 statistics (struct rip6stat, netinet6/raw_ip6.h)");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_PREFER_TEMPADDR, prefer_tempaddr,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_prefer_tempaddr), 0,
"Prefer RFC3041 temporary addresses in source address selection");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_USE_DEFAULTZONE, use_defaultzone,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_use_defzone), 0,
"Use the default scope zone when none is specified");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_MAXFRAGS, maxfrags,
CTLFLAG_RW, &ip6_maxfrags, 0,
"Maximum allowed number of outstanding IPv6 packet fragments. "
"A value of 0 means no fragmented packets will be accepted, while a "
"a value of -1 means no limit");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_MAXFRAGBUCKETSIZE, maxfragbucketsize,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_maxfragbucketsize), 0,
"Maximum number of reassembly queues per hash bucket");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_MAXFRAGSPERPACKET, maxfragsperpacket,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_maxfragsperpacket), 0,
"Maximum allowed number of fragments per packet");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_MCAST_PMTU, mcast_pmtu,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_mcast_pmtu), 0,
"Enable path MTU discovery for multicast packets");
#ifdef IPSTEALTH
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_STEALTH, stealth, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(ip6stealth), 0,
"Forward IPv6 packets without decrementing their TTL");
#endif
/* net.inet6.icmp6 */
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_REDIRACCEPT, rediraccept,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6_rediraccept), 0,
"Accept ICMPv6 redirect messages");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_REDIRTIMEOUT, redirtimeout,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6_redirtimeout), 0,
""); /* XXX unused */
SYSCTL_VNET_PCPUSTAT(_net_inet6_icmp6, ICMPV6CTL_STATS, stats,
struct icmp6stat, icmp6stat,
"ICMPv6 statistics (struct icmp6stat, netinet/icmp6.h)");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_PRUNE, nd6_prune,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_prune), 0,
"Frequency in seconds of checks for expired prefixes and routers");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_DELAY, nd6_delay,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_delay), 0,
"Delay in seconds before probing for reachability");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_UMAXTRIES, nd6_umaxtries,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_umaxtries), 0,
"Number of ICMPv6 NS messages sent during reachability detection");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_MMAXTRIES, nd6_mmaxtries,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_mmaxtries), 0,
"Number of ICMPv6 NS messages sent during address resolution");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_USELOOPBACK, nd6_useloopback,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_useloopback), 0,
"Create a loopback route when configuring an IPv6 address");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_NODEINFO, nodeinfo,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6_nodeinfo), 0,
"Mask of enabled RF4620 node information query types");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_NODEINFO_OLDMCPREFIX,
nodeinfo_oldmcprefix, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(icmp6_nodeinfo_oldmcprefix), 0,
"Join old IPv6 NI group address in draft-ietf-ipngwg-icmp-name-lookup "
"for compatibility with KAME implementation");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ERRPPSLIMIT, errppslimit,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6errppslim), 0,
"Maximum number of ICMPv6 error messages per second");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_MAXNUDHINT, nd6_maxnudhint,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_maxnudhint), 0,
""); /* XXX unused */
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_DEBUG, nd6_debug,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_debug), 0,
"Log NDP debug messages");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_ONLINKNSRFC4861,
nd6_onlink_ns_rfc4861, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(nd6_onlink_ns_rfc4861), 0,
"Accept 'on-link' ICMPv6 NS messages in compliance with RFC 4861");
#ifdef EXPERIMENTAL
SYSCTL_INT(_net_inet6_icmp6, OID_AUTO,
nd6_ignore_ipv6_only_ra, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(nd6_ignore_ipv6_only_ra), 0,
"Ignore the 'IPv6-Only flag' in RA messages in compliance with "
"draft-ietf-6man-ipv6only-flag");
#endif