freebsd-nq/sys/netinet/in_pcb.h
David Malone fcd1001c63 Make net.inet.ip.portrange.reservedhigh and
net.inet.ip.portrange.reservedlow apply to IPv6 aswell as IPv4.

We could have made new sysctls for IPv6, but that potentially makes
things complicated for mapped addresses. This seems like the least
confusing option and least likely to cause obscure problems in the
future.

This change makes the mac_portacl module useful with IPv6 apps.

Reviewed by:	ume
MFC after:	1 month
2006-03-19 11:48:48 +00:00

374 lines
14 KiB
C

/*-
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_pcb.h 8.1 (Berkeley) 6/10/93
* $FreeBSD$
*/
#ifndef _NETINET_IN_PCB_H_
#define _NETINET_IN_PCB_H_
#include <sys/queue.h>
#include <sys/_lock.h>
#include <sys/_mutex.h>
#include <net/route.h>
#define in6pcb inpcb /* for KAME src sync over BSD*'s */
#define in6p_sp inp_sp /* for KAME src sync over BSD*'s */
struct inpcbpolicy;
/*
* Common structure pcb for internet protocol implementation.
* Here are stored pointers to local and foreign host table
* entries, local and foreign socket numbers, and pointers
* up (to a socket structure) and down (to a protocol-specific)
* control block.
*/
LIST_HEAD(inpcbhead, inpcb);
LIST_HEAD(inpcbporthead, inpcbport);
typedef u_quad_t inp_gen_t;
/*
* PCB with AF_INET6 null bind'ed laddr can receive AF_INET input packet.
* So, AF_INET6 null laddr is also used as AF_INET null laddr,
* by utilize following structure. (At last, same as INRIA)
*/
struct in_addr_4in6 {
u_int32_t ia46_pad32[3];
struct in_addr ia46_addr4;
};
/*
* NOTE: ipv6 addrs should be 64-bit aligned, per RFC 2553.
* in_conninfo has some extra padding to accomplish this.
*/
struct in_endpoints {
u_int16_t ie_fport; /* foreign port */
u_int16_t ie_lport; /* local port */
/* protocol dependent part, local and foreign addr */
union {
/* foreign host table entry */
struct in_addr_4in6 ie46_foreign;
struct in6_addr ie6_foreign;
} ie_dependfaddr;
union {
/* local host table entry */
struct in_addr_4in6 ie46_local;
struct in6_addr ie6_local;
} ie_dependladdr;
#define ie_faddr ie_dependfaddr.ie46_foreign.ia46_addr4
#define ie_laddr ie_dependladdr.ie46_local.ia46_addr4
#define ie6_faddr ie_dependfaddr.ie6_foreign
#define ie6_laddr ie_dependladdr.ie6_local
};
/*
* XXX
* the defines for inc_* are hacks and should be changed to direct references
*/
struct in_conninfo {
u_int8_t inc_flags;
u_int8_t inc_len;
u_int16_t inc_pad; /* XXX alignment for in_endpoints */
/* protocol dependent part */
struct in_endpoints inc_ie;
};
#define inc_isipv6 inc_flags /* temp compatability */
#define inc_fport inc_ie.ie_fport
#define inc_lport inc_ie.ie_lport
#define inc_faddr inc_ie.ie_faddr
#define inc_laddr inc_ie.ie_laddr
#define inc6_faddr inc_ie.ie6_faddr
#define inc6_laddr inc_ie.ie6_laddr
struct icmp6_filter;
struct inpcb {
LIST_ENTRY(inpcb) inp_hash; /* hash list */
LIST_ENTRY(inpcb) inp_list; /* list for all PCBs of this proto */
u_int32_t inp_flow;
/* local and foreign ports, local and foreign addr */
struct in_conninfo inp_inc;
caddr_t inp_ppcb; /* pointer to per-protocol pcb */
struct inpcbinfo *inp_pcbinfo; /* PCB list info */
struct socket *inp_socket; /* back pointer to socket */
/* list for this PCB's local port */
struct label *inp_label; /* MAC label */
int inp_flags; /* generic IP/datagram flags */
struct inpcbpolicy *inp_sp; /* for IPSEC */
u_char inp_vflag; /* IP version flag (v4/v6) */
#define INP_IPV4 0x1
#define INP_IPV6 0x2
#define INP_IPV6PROTO 0x4 /* opened under IPv6 protocol */
#define INP_TIMEWAIT 0x8 /* .. probably doesn't go here */
#define INP_ONESBCAST 0x10 /* send all-ones broadcast */
u_char inp_ip_ttl; /* time to live proto */
u_char inp_ip_p; /* protocol proto */
u_char inp_ip_minttl; /* minimum TTL or drop */
/* protocol dependent part; options */
struct {
u_char inp4_ip_tos; /* type of service proto */
struct mbuf *inp4_options; /* IP options */
struct ip_moptions *inp4_moptions; /* IP multicast options */
} inp_depend4;
#define inp_fport inp_inc.inc_fport
#define inp_lport inp_inc.inc_lport
#define inp_faddr inp_inc.inc_faddr
#define inp_laddr inp_inc.inc_laddr
#define inp_ip_tos inp_depend4.inp4_ip_tos
#define inp_options inp_depend4.inp4_options
#define inp_moptions inp_depend4.inp4_moptions
struct {
/* IP options */
struct mbuf *inp6_options;
/* IP6 options for outgoing packets */
struct ip6_pktopts *inp6_outputopts;
/* IP multicast options */
struct ip6_moptions *inp6_moptions;
/* ICMPv6 code type filter */
struct icmp6_filter *inp6_icmp6filt;
/* IPV6_CHECKSUM setsockopt */
int inp6_cksum;
u_short inp6_ifindex;
short inp6_hops;
} inp_depend6;
LIST_ENTRY(inpcb) inp_portlist;
struct inpcbport *inp_phd; /* head of this list */
inp_gen_t inp_gencnt; /* generation count of this instance */
struct mtx inp_mtx;
#define in6p_faddr inp_inc.inc6_faddr
#define in6p_laddr inp_inc.inc6_laddr
#define in6p_ip6_hlim inp_depend6.inp6_hlim
#define in6p_hops inp_depend6.inp6_hops /* default hop limit */
#define in6p_ip6_nxt inp_ip_p
#define in6p_flowinfo inp_flow
#define in6p_vflag inp_vflag
#define in6p_options inp_depend6.inp6_options
#define in6p_outputopts inp_depend6.inp6_outputopts
#define in6p_moptions inp_depend6.inp6_moptions
#define in6p_icmp6filt inp_depend6.inp6_icmp6filt
#define in6p_cksum inp_depend6.inp6_cksum
#define inp6_ifindex inp_depend6.inp6_ifindex
#define in6p_flags inp_flags /* for KAME src sync over BSD*'s */
#define in6p_socket inp_socket /* for KAME src sync over BSD*'s */
#define in6p_lport inp_lport /* for KAME src sync over BSD*'s */
#define in6p_fport inp_fport /* for KAME src sync over BSD*'s */
#define in6p_ppcb inp_ppcb /* for KAME src sync over BSD*'s */
};
/*
* The range of the generation count, as used in this implementation,
* is 9e19. We would have to create 300 billion connections per
* second for this number to roll over in a year. This seems sufficiently
* unlikely that we simply don't concern ourselves with that possibility.
*/
/*
* Interface exported to userland by various protocols which use
* inpcbs. Hack alert -- only define if struct xsocket is in scope.
*/
#ifdef _SYS_SOCKETVAR_H_
struct xinpcb {
size_t xi_len; /* length of this structure */
struct inpcb xi_inp;
struct xsocket xi_socket;
u_quad_t xi_alignment_hack;
};
struct xinpgen {
size_t xig_len; /* length of this structure */
u_int xig_count; /* number of PCBs at this time */
inp_gen_t xig_gen; /* generation count at this time */
so_gen_t xig_sogen; /* socket generation count at this time */
};
#endif /* _SYS_SOCKETVAR_H_ */
struct inpcbport {
LIST_ENTRY(inpcbport) phd_hash;
struct inpcbhead phd_pcblist;
u_short phd_port;
};
struct inpcbinfo { /* XXX documentation, prefixes */
struct inpcbhead *hashbase;
u_long hashmask;
struct inpcbporthead *porthashbase;
u_long porthashmask;
struct inpcbhead *listhead;
u_short lastport;
u_short lastlow;
u_short lasthi;
struct uma_zone *ipi_zone; /* zone to allocate pcbs from */
u_int ipi_count; /* number of pcbs in this list */
u_quad_t ipi_gencnt; /* current generation count */
struct mtx ipi_mtx;
};
/*
* NB: We cannot enable assertions when IPv6 is configured as
* this code is shared by both IPv4 and IPv6 and IPv6 is
* not properly locked.
*/
#define INP_LOCK_INIT(inp, d, t) \
mtx_init(&(inp)->inp_mtx, (d), (t), MTX_DEF | MTX_RECURSE | MTX_DUPOK)
#define INP_LOCK_DESTROY(inp) mtx_destroy(&(inp)->inp_mtx)
#define INP_LOCK(inp) mtx_lock(&(inp)->inp_mtx)
#define INP_UNLOCK(inp) mtx_unlock(&(inp)->inp_mtx)
#define INP_LOCK_ASSERT(inp) do { \
mtx_assert(&(inp)->inp_mtx, MA_OWNED); \
NET_ASSERT_GIANT(); \
} while (0)
#define INP_UNLOCK_ASSERT(inp) mtx_assert(&(inp)->inp_mtx, MA_NOTOWNED)
#define INP_INFO_LOCK_INIT(ipi, d) \
mtx_init(&(ipi)->ipi_mtx, (d), NULL, MTX_DEF | MTX_RECURSE)
#define INP_INFO_LOCK_DESTROY(ipi) mtx_destroy(&(ipi)->ipi_mtx)
#define INP_INFO_RLOCK(ipi) mtx_lock(&(ipi)->ipi_mtx)
#define INP_INFO_WLOCK(ipi) mtx_lock(&(ipi)->ipi_mtx)
#define INP_INFO_RUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_mtx)
#define INP_INFO_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_mtx)
#define INP_INFO_RLOCK_ASSERT(ipi) do { \
mtx_assert(&(ipi)->ipi_mtx, MA_OWNED); \
NET_ASSERT_GIANT(); \
} while (0)
#define INP_INFO_WLOCK_ASSERT(ipi) do { \
mtx_assert(&(ipi)->ipi_mtx, MA_OWNED); \
NET_ASSERT_GIANT(); \
} while (0)
#define INP_PCBHASH(faddr, lport, fport, mask) \
(((faddr) ^ ((faddr) >> 16) ^ ntohs((lport) ^ (fport))) & (mask))
#define INP_PCBPORTHASH(lport, mask) \
(ntohs((lport)) & (mask))
/* flags in inp_flags: */
#define INP_RECVOPTS 0x01 /* receive incoming IP options */
#define INP_RECVRETOPTS 0x02 /* receive IP options for reply */
#define INP_RECVDSTADDR 0x04 /* receive IP dst address */
#define INP_HDRINCL 0x08 /* user supplies entire IP header */
#define INP_HIGHPORT 0x10 /* user wants "high" port binding */
#define INP_LOWPORT 0x20 /* user wants "low" port binding */
#define INP_ANONPORT 0x40 /* port chosen for user */
#define INP_RECVIF 0x80 /* receive incoming interface */
#define INP_MTUDISC 0x100 /* user can do MTU discovery */
#define INP_FAITH 0x200 /* accept FAITH'ed connections */
#define INP_RECVTTL 0x400 /* receive incoming IP TTL */
#define INP_DONTFRAG 0x800 /* don't fragment packet */
#define IN6P_IPV6_V6ONLY 0x008000 /* restrict AF_INET6 socket for v6 */
#define IN6P_PKTINFO 0x010000 /* receive IP6 dst and I/F */
#define IN6P_HOPLIMIT 0x020000 /* receive hoplimit */
#define IN6P_HOPOPTS 0x040000 /* receive hop-by-hop options */
#define IN6P_DSTOPTS 0x080000 /* receive dst options after rthdr */
#define IN6P_RTHDR 0x100000 /* receive routing header */
#define IN6P_RTHDRDSTOPTS 0x200000 /* receive dstoptions before rthdr */
#define IN6P_TCLASS 0x400000 /* receive traffic class value */
#define IN6P_AUTOFLOWLABEL 0x800000 /* attach flowlabel automatically */
#define IN6P_RFC2292 0x40000000 /* used RFC2292 API on the socket */
#define IN6P_MTU 0x80000000 /* receive path MTU */
#define INP_CONTROLOPTS (INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR|\
INP_RECVIF|INP_RECVTTL|\
IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\
IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\
IN6P_TCLASS|IN6P_AUTOFLOWLABEL|IN6P_RFC2292|\
IN6P_MTU)
#define INP_UNMAPPABLEOPTS (IN6P_HOPOPTS|IN6P_DSTOPTS|IN6P_RTHDR|\
IN6P_TCLASS|IN6P_AUTOFLOWLABEL)
/* for KAME src sync over BSD*'s */
#define IN6P_HIGHPORT INP_HIGHPORT
#define IN6P_LOWPORT INP_LOWPORT
#define IN6P_ANONPORT INP_ANONPORT
#define IN6P_RECVIF INP_RECVIF
#define IN6P_MTUDISC INP_MTUDISC
#define IN6P_FAITH INP_FAITH
#define IN6P_CONTROLOPTS INP_CONTROLOPTS
/*
* socket AF version is {newer than,or include}
* actual datagram AF version
*/
#define INPLOOKUP_WILDCARD 1
#define sotoinpcb(so) ((struct inpcb *)(so)->so_pcb)
#define sotoin6pcb(so) sotoinpcb(so) /* for KAME src sync over BSD*'s */
#define INP_SOCKAF(so) so->so_proto->pr_domain->dom_family
#define INP_CHECK_SOCKAF(so, af) (INP_SOCKAF(so) == af)
#ifdef _KERNEL
extern int ipport_reservedhigh;
extern int ipport_reservedlow;
extern int ipport_lowfirstauto;
extern int ipport_lowlastauto;
extern int ipport_firstauto;
extern int ipport_lastauto;
extern int ipport_hifirstauto;
extern int ipport_hilastauto;
extern struct callout ipport_tick_callout;
void in_pcbpurgeif0(struct inpcbinfo *, struct ifnet *);
int in_pcballoc(struct socket *, struct inpcbinfo *, const char *);
int in_pcbbind(struct inpcb *, struct sockaddr *, struct ucred *);
int in_pcbbind_setup(struct inpcb *, struct sockaddr *, in_addr_t *,
u_short *, struct ucred *);
int in_pcbconnect(struct inpcb *, struct sockaddr *, struct ucred *);
int in_pcbconnect_setup(struct inpcb *, struct sockaddr *, in_addr_t *,
u_short *, in_addr_t *, u_short *, struct inpcb **,
struct ucred *);
void in_pcbdetach(struct inpcb *);
void in_pcbdisconnect(struct inpcb *);
int in_pcbinshash(struct inpcb *);
struct inpcb *
in_pcblookup_local(struct inpcbinfo *,
struct in_addr, u_int, int);
struct inpcb *
in_pcblookup_hash(struct inpcbinfo *, struct in_addr, u_int,
struct in_addr, u_int, int, struct ifnet *);
void in_pcbnotifyall(struct inpcbinfo *pcbinfo, struct in_addr,
int, struct inpcb *(*)(struct inpcb *, int));
void in_pcbrehash(struct inpcb *);
void in_pcbsetsolabel(struct socket *so);
int in_setpeeraddr(struct socket *so, struct sockaddr **nam, struct inpcbinfo *pcbinfo);
int in_setsockaddr(struct socket *so, struct sockaddr **nam, struct inpcbinfo *pcbinfo);
struct sockaddr *
in_sockaddr(in_port_t port, struct in_addr *addr);
void in_pcbsosetlabel(struct socket *so);
void in_pcbremlists(struct inpcb *inp);
void ipport_tick(void *xtp);
#endif /* _KERNEL */
#endif /* !_NETINET_IN_PCB_H_ */