d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ff3468ac94
freebsd-nq/sys/cam/cam_xpt.c
Konstantin Belousov cd85379104 Make MAXPHYS tunable. Bump MAXPHYS to 1M. 
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.

Make b_pages[] array in struct buf flexible.  Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*).  Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.

Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys.  Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight.  Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.

Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.

Suggested by: mav (*)
Reviewed by:	imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D27225
2020-11-28 12:12:51 +00:00

5587 lines
143 KiB
C
Raw Blame History

/*-
* Implementation of the Common Access Method Transport (XPT) layer.
*
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
* Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include "opt_printf.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bio.h>
#include <sys/bus.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/time.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/proc.h>
#include <sys/sbuf.h>
#include <sys/smp.h>
#include <sys/taskqueue.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/kthread.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_iosched.h>
#include <cam/cam_periph.h>
#include <cam/cam_queue.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_xpt_internal.h>
#include <cam/cam_debug.h>
#include <cam/cam_compat.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_pass.h>
#include <machine/stdarg.h> /* for xpt_print below */
#include "opt_cam.h"
/* Wild guess based on not wanting to grow the stack too much */
#define XPT_PRINT_MAXLEN 512
#ifdef PRINTF_BUFR_SIZE
#define XPT_PRINT_LEN PRINTF_BUFR_SIZE
#else
#define XPT_PRINT_LEN 128
#endif
_Static_assert(XPT_PRINT_LEN <= XPT_PRINT_MAXLEN, "XPT_PRINT_LEN is too large");
/*
* This is the maximum number of high powered commands (e.g. start unit)
* that can be outstanding at a particular time.
*/
#ifndef CAM_MAX_HIGHPOWER
#define CAM_MAX_HIGHPOWER 4
#endif
/* Datastructures internal to the xpt layer */
MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
struct xpt_softc {
uint32_t xpt_generation;
/* number of high powered commands that can go through right now */
struct mtx xpt_highpower_lock;
STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
int num_highpower;
/* queue for handling async rescan requests. */
TAILQ_HEAD(, ccb_hdr) ccb_scanq;
int buses_to_config;
int buses_config_done;
int announce_nosbuf;
/*
* Registered buses
*
* N.B., "busses" is an archaic spelling of "buses". In new code
* "buses" is preferred.
*/
TAILQ_HEAD(,cam_eb) xpt_busses;
u_int bus_generation;
int boot_delay;
struct callout boot_callout;
struct task boot_task;
struct root_hold_token xpt_rootmount;
struct mtx xpt_topo_lock;
struct taskqueue *xpt_taskq;
};
typedef enum {
DM_RET_COPY = 0x01,
DM_RET_FLAG_MASK = 0x0f,
DM_RET_NONE = 0x00,
DM_RET_STOP = 0x10,
DM_RET_DESCEND = 0x20,
DM_RET_ERROR = 0x30,
DM_RET_ACTION_MASK = 0xf0
} dev_match_ret;
typedef enum {
XPT_DEPTH_BUS,
XPT_DEPTH_TARGET,
XPT_DEPTH_DEVICE,
XPT_DEPTH_PERIPH
} xpt_traverse_depth;
struct xpt_traverse_config {
xpt_traverse_depth depth;
void *tr_func;
void *tr_arg;
};
typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
/* Transport layer configuration information */
static struct xpt_softc xsoftc;
MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF);
SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
&xsoftc.boot_delay, 0, "Bus registration wait time");
SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD,
&xsoftc.xpt_generation, 0, "CAM peripheral generation count");
SYSCTL_INT(_kern_cam, OID_AUTO, announce_nosbuf, CTLFLAG_RWTUN,
&xsoftc.announce_nosbuf, 0, "Don't use sbuf for announcements");
struct cam_doneq {
struct mtx_padalign cam_doneq_mtx;
STAILQ_HEAD(, ccb_hdr) cam_doneq;
int cam_doneq_sleep;
};
static struct cam_doneq cam_doneqs[MAXCPU];
static u_int __read_mostly cam_num_doneqs;
static struct proc *cam_proc;
SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
&cam_num_doneqs, 0, "Number of completion queues/threads");
struct cam_periph *xpt_periph;
static periph_init_t xpt_periph_init;
static struct periph_driver xpt_driver =
{
xpt_periph_init, "xpt",
TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
CAM_PERIPH_DRV_EARLY
};
PERIPHDRIVER_DECLARE(xpt, xpt_driver);
static d_open_t xptopen;
static d_close_t xptclose;
static d_ioctl_t xptioctl;
static d_ioctl_t xptdoioctl;
static struct cdevsw xpt_cdevsw = {
.d_version = D_VERSION,
.d_flags = 0,
.d_open = xptopen,
.d_close = xptclose,
.d_ioctl = xptioctl,
.d_name = "xpt",
};
/* Storage for debugging datastructures */
struct cam_path *cam_dpath;
u_int32_t __read_mostly cam_dflags = CAM_DEBUG_FLAGS;
SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN,
&cam_dflags, 0, "Enabled debug flags");
u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN,
&cam_debug_delay, 0, "Delay in us after each debug message");
/* Our boot-time initialization hook */
static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
static moduledata_t cam_moduledata = {
"cam",
cam_module_event_handler,
NULL
};
static int xpt_init(void *);
DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
MODULE_VERSION(cam, 1);
static void xpt_async_bcast(struct async_list *async_head,
u_int32_t async_code,
struct cam_path *path,
void *async_arg);
static path_id_t xptnextfreepathid(void);
static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
static union ccb *xpt_get_ccb(struct cam_periph *periph);
static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
static void xpt_run_allocq(struct cam_periph *periph, int sleep);
static void xpt_run_allocq_task(void *context, int pending);
static void xpt_run_devq(struct cam_devq *devq);
static callout_func_t xpt_release_devq_timeout;
static void xpt_acquire_bus(struct cam_eb *bus);
static void xpt_release_bus(struct cam_eb *bus);
static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
int run_queue);
static struct cam_et*
xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
static void xpt_acquire_target(struct cam_et *target);
static void xpt_release_target(struct cam_et *target);
static struct cam_eb*
xpt_find_bus(path_id_t path_id);
static struct cam_et*
xpt_find_target(struct cam_eb *bus, target_id_t target_id);
static struct cam_ed*
xpt_find_device(struct cam_et *target, lun_id_t lun_id);
static void xpt_config(void *arg);
static void xpt_hold_boot_locked(void);
static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
u_int32_t new_priority);
static xpt_devicefunc_t xptpassannouncefunc;
static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
static void xptpoll(struct cam_sim *sim);
static void camisr_runqueue(void);
static void xpt_done_process(struct ccb_hdr *ccb_h);
static void xpt_done_td(void *);
static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
u_int num_patterns, struct cam_eb *bus);
static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
u_int num_patterns,
struct cam_ed *device);
static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
u_int num_patterns,
struct cam_periph *periph);
static xpt_busfunc_t xptedtbusfunc;
static xpt_targetfunc_t xptedttargetfunc;
static xpt_devicefunc_t xptedtdevicefunc;
static xpt_periphfunc_t xptedtperiphfunc;
static xpt_pdrvfunc_t xptplistpdrvfunc;
static xpt_periphfunc_t xptplistperiphfunc;
static int xptedtmatch(struct ccb_dev_match *cdm);
static int xptperiphlistmatch(struct ccb_dev_match *cdm);
static int xptbustraverse(struct cam_eb *start_bus,
xpt_busfunc_t *tr_func, void *arg);
static int xpttargettraverse(struct cam_eb *bus,
struct cam_et *start_target,
xpt_targetfunc_t *tr_func, void *arg);
static int xptdevicetraverse(struct cam_et *target,
struct cam_ed *start_device,
xpt_devicefunc_t *tr_func, void *arg);
static int xptperiphtraverse(struct cam_ed *device,
struct cam_periph *start_periph,
xpt_periphfunc_t *tr_func, void *arg);
static int xptpdrvtraverse(struct periph_driver **start_pdrv,
xpt_pdrvfunc_t *tr_func, void *arg);
static int xptpdperiphtraverse(struct periph_driver **pdrv,
struct cam_periph *start_periph,
xpt_periphfunc_t *tr_func,
void *arg);
static xpt_busfunc_t xptdefbusfunc;
static xpt_targetfunc_t xptdeftargetfunc;
static xpt_devicefunc_t xptdefdevicefunc;
static xpt_periphfunc_t xptdefperiphfunc;
static void xpt_finishconfig_task(void *context, int pending);
static void xpt_dev_async_default(u_int32_t async_code,
struct cam_eb *bus,
struct cam_et *target,
struct cam_ed *device,
void *async_arg);
static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
struct cam_et *target,
lun_id_t lun_id);
static xpt_devicefunc_t xptsetasyncfunc;
static xpt_busfunc_t xptsetasyncbusfunc;
static cam_status xptregister(struct cam_periph *periph,
void *arg);
static __inline int
xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
{
int retval;
mtx_assert(&devq->send_mtx, MA_OWNED);
if ((dev->ccbq.queue.entries > 0) &&
(dev->ccbq.dev_openings > 0) &&
(dev->ccbq.queue.qfrozen_cnt == 0)) {
/*
* The priority of a device waiting for controller
* resources is that of the highest priority CCB
* enqueued.
*/
retval =
xpt_schedule_dev(&devq->send_queue,
&dev->devq_entry,
CAMQ_GET_PRIO(&dev->ccbq.queue));
} else {
retval = 0;
}
return (retval);
}
static __inline int
device_is_queued(struct cam_ed *device)
{
return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
}
static void
xpt_periph_init(void)
{
make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
}
static int
xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
{
/*
* Only allow read-write access.
*/
if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
return(EPERM);
/*
* We don't allow nonblocking access.
*/
if ((flags & O_NONBLOCK) != 0) {
printf("%s: can't do nonblocking access\n", devtoname(dev));
return(ENODEV);
}
return(0);
}
static int
xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
return(0);
}
/*
* Don't automatically grab the xpt softc lock here even though this is going
* through the xpt device. The xpt device is really just a back door for
* accessing other devices and SIMs, so the right thing to do is to grab
* the appropriate SIM lock once the bus/SIM is located.
*/
static int
xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
{
int error;
if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
}
return (error);
}
static int
xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
{
int error;
error = 0;
switch(cmd) {
/*
* For the transport layer CAMIOCOMMAND ioctl, we really only want
* to accept CCB types that don't quite make sense to send through a
* passthrough driver. XPT_PATH_INQ is an exception to this, as stated
* in the CAM spec.
*/
case CAMIOCOMMAND: {
union ccb *ccb;
union ccb *inccb;
struct cam_eb *bus;
inccb = (union ccb *)addr;
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (inccb->ccb_h.func_code == XPT_SCSI_IO)
inccb->csio.bio = NULL;
#endif
if (inccb->ccb_h.flags & CAM_UNLOCKED)
return (EINVAL);
bus = xpt_find_bus(inccb->ccb_h.path_id);
if (bus == NULL)
return (EINVAL);
switch (inccb->ccb_h.func_code) {
case XPT_SCAN_BUS:
case XPT_RESET_BUS:
if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
xpt_release_bus(bus);
return (EINVAL);
}
break;
case XPT_SCAN_TGT:
if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
xpt_release_bus(bus);
return (EINVAL);
}
break;
default:
break;
}
switch(inccb->ccb_h.func_code) {
case XPT_SCAN_BUS:
case XPT_RESET_BUS:
case XPT_PATH_INQ:
case XPT_ENG_INQ:
case XPT_SCAN_LUN:
case XPT_SCAN_TGT:
ccb = xpt_alloc_ccb();
/*
* Create a path using the bus, target, and lun the
* user passed in.
*/
if (xpt_create_path(&ccb->ccb_h.path, NULL,
inccb->ccb_h.path_id,
inccb->ccb_h.target_id,
inccb->ccb_h.target_lun) !=
CAM_REQ_CMP){
error = EINVAL;
xpt_free_ccb(ccb);
break;
}
/* Ensure all of our fields are correct */
xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
inccb->ccb_h.pinfo.priority);
xpt_merge_ccb(ccb, inccb);
xpt_path_lock(ccb->ccb_h.path);
cam_periph_runccb(ccb, NULL, 0, 0, NULL);
xpt_path_unlock(ccb->ccb_h.path);
bcopy(ccb, inccb, sizeof(union ccb));
xpt_free_path(ccb->ccb_h.path);
xpt_free_ccb(ccb);
break;
case XPT_DEBUG: {
union ccb ccb;
/*
* This is an immediate CCB, so it's okay to
* allocate it on the stack.
*/
/*
* Create a path using the bus, target, and lun the
* user passed in.
*/
if (xpt_create_path(&ccb.ccb_h.path, NULL,
inccb->ccb_h.path_id,
inccb->ccb_h.target_id,
inccb->ccb_h.target_lun) !=
CAM_REQ_CMP){
error = EINVAL;
break;
}
/* Ensure all of our fields are correct */
xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
inccb->ccb_h.pinfo.priority);
xpt_merge_ccb(&ccb, inccb);
xpt_action(&ccb);
bcopy(&ccb, inccb, sizeof(union ccb));
xpt_free_path(ccb.ccb_h.path);
break;
}
case XPT_DEV_MATCH: {
struct cam_periph_map_info mapinfo;
struct cam_path *old_path;
/*
* We can't deal with physical addresses for this
* type of transaction.
*/
if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
CAM_DATA_VADDR) {
error = EINVAL;
break;
}
/*
* Save this in case the caller had it set to
* something in particular.
*/
old_path = inccb->ccb_h.path;
/*
* We really don't need a path for the matching
* code. The path is needed because of the
* debugging statements in xpt_action(). They
* assume that the CCB has a valid path.
*/
inccb->ccb_h.path = xpt_periph->path;
bzero(&mapinfo, sizeof(mapinfo));
/*
* Map the pattern and match buffers into kernel
* virtual address space.
*/
error = cam_periph_mapmem(inccb, &mapinfo, maxphys);
if (error) {
inccb->ccb_h.path = old_path;
break;
}
/*
* This is an immediate CCB, we can send it on directly.
*/
xpt_action(inccb);
/*
* Map the buffers back into user space.
*/
cam_periph_unmapmem(inccb, &mapinfo);
inccb->ccb_h.path = old_path;
error = 0;
break;
}
default:
error = ENOTSUP;
break;
}
xpt_release_bus(bus);
break;
}
/*
* This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
* with the periphal driver name and unit name filled in. The other
* fields don't really matter as input. The passthrough driver name
* ("pass"), and unit number are passed back in the ccb. The current
* device generation number, and the index into the device peripheral
* driver list, and the status are also passed back. Note that
* since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
* we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
* (or rather should be) impossible for the device peripheral driver
* list to change since we look at the whole thing in one pass, and
* we do it with lock protection.
*
*/
case CAMGETPASSTHRU: {
union ccb *ccb;
struct cam_periph *periph;
struct periph_driver **p_drv;
char *name;
u_int unit;
int base_periph_found;
ccb = (union ccb *)addr;
unit = ccb->cgdl.unit_number;
name = ccb->cgdl.periph_name;
base_periph_found = 0;
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (ccb->ccb_h.func_code == XPT_SCSI_IO)
ccb->csio.bio = NULL;
#endif
/*
* Sanity check -- make sure we don't get a null peripheral
* driver name.
*/
if (*ccb->cgdl.periph_name == '\0') {
error = EINVAL;
break;
}
/* Keep the list from changing while we traverse it */
xpt_lock_buses();
/* first find our driver in the list of drivers */
for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
if (strcmp((*p_drv)->driver_name, name) == 0)
break;
if (*p_drv == NULL) {
xpt_unlock_buses();
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
ccb->cgdl.status = CAM_GDEVLIST_ERROR;
*ccb->cgdl.periph_name = '\0';
ccb->cgdl.unit_number = 0;
error = ENOENT;
break;
}
/*
* Run through every peripheral instance of this driver
* and check to see whether it matches the unit passed
* in by the user. If it does, get out of the loops and
* find the passthrough driver associated with that
* peripheral driver.
*/
for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
periph = TAILQ_NEXT(periph, unit_links)) {
if (periph->unit_number == unit)
break;
}
/*
* If we found the peripheral driver that the user passed
* in, go through all of the peripheral drivers for that
* particular device and look for a passthrough driver.
*/
if (periph != NULL) {
struct cam_ed *device;
int i;
base_periph_found = 1;
device = periph->path->device;
for (i = 0, periph = SLIST_FIRST(&device->periphs);
periph != NULL;
periph = SLIST_NEXT(periph, periph_links), i++) {
/*
* Check to see whether we have a
* passthrough device or not.
*/
if (strcmp(periph->periph_name, "pass") == 0) {
/*
* Fill in the getdevlist fields.
*/
strlcpy(ccb->cgdl.periph_name,
periph->periph_name,
sizeof(ccb->cgdl.periph_name));
ccb->cgdl.unit_number =
periph->unit_number;
if (SLIST_NEXT(periph, periph_links))
ccb->cgdl.status =
CAM_GDEVLIST_MORE_DEVS;
else
ccb->cgdl.status =
CAM_GDEVLIST_LAST_DEVICE;
ccb->cgdl.generation =
device->generation;
ccb->cgdl.index = i;
/*
* Fill in some CCB header fields
* that the user may want.
*/
ccb->ccb_h.path_id =
periph->path->bus->path_id;
ccb->ccb_h.target_id =
periph->path->target->target_id;
ccb->ccb_h.target_lun =
periph->path->device->lun_id;
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
}
}
/*
* If the periph is null here, one of two things has
* happened. The first possibility is that we couldn't
* find the unit number of the particular peripheral driver
* that the user is asking about. e.g. the user asks for
* the passthrough driver for "da11". We find the list of
* "da" peripherals all right, but there is no unit 11.
* The other possibility is that we went through the list
* of peripheral drivers attached to the device structure,
* but didn't find one with the name "pass". Either way,
* we return ENOENT, since we couldn't find something.
*/
if (periph == NULL) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
ccb->cgdl.status = CAM_GDEVLIST_ERROR;
*ccb->cgdl.periph_name = '\0';
ccb->cgdl.unit_number = 0;
error = ENOENT;
/*
* It is unfortunate that this is even necessary,
* but there are many, many clueless users out there.
* If this is true, the user is looking for the
* passthrough driver, but doesn't have one in his
* kernel.
*/
if (base_periph_found == 1) {
printf("xptioctl: pass driver is not in the "
"kernel\n");
printf("xptioctl: put \"device pass\" in "
"your kernel config file\n");
}
}
xpt_unlock_buses();
break;
}
default:
error = ENOTTY;
break;
}
return(error);
}
static int
cam_module_event_handler(module_t mod, int what, void *arg)
{
int error;
switch (what) {
case MOD_LOAD:
if ((error = xpt_init(NULL)) != 0)
return (error);
break;
case MOD_UNLOAD:
return EBUSY;
default:
return EOPNOTSUPP;
}
return 0;
}
static struct xpt_proto *
xpt_proto_find(cam_proto proto)
{
struct xpt_proto **pp;
SET_FOREACH(pp, cam_xpt_proto_set) {
if ((*pp)->proto == proto)
return *pp;
}
return NULL;
}
static void
xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
{
if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
xpt_free_path(done_ccb->ccb_h.path);
xpt_free_ccb(done_ccb);
} else {
done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
(*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
}
xpt_release_boot();
}
/* thread to handle bus rescans */
static void
xpt_scanner_thread(void *dummy)
{
union ccb *ccb;
struct mtx *mtx;
struct cam_ed *device;
xpt_lock_buses();
for (;;) {
if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
"-", 0);
if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
xpt_unlock_buses();
/*
* We need to lock the device's mutex which we use as
* the path mutex. We can't do it directly because the
* cam_path in the ccb may wind up going away because
* the path lock may be dropped and the path retired in
* the completion callback. We do this directly to keep
* the reference counts in cam_path sane. We also have
* to copy the device pointer because ccb_h.path may
* be freed in the callback.
*/
mtx = xpt_path_mtx(ccb->ccb_h.path);
device = ccb->ccb_h.path->device;
xpt_acquire_device(device);
mtx_lock(mtx);
xpt_action(ccb);
mtx_unlock(mtx);
xpt_release_device(device);
xpt_lock_buses();
}
}
}
void
xpt_rescan(union ccb *ccb)
{
struct ccb_hdr *hdr;
/* Prepare request */
if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
ccb->ccb_h.func_code = XPT_SCAN_BUS;
else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
ccb->ccb_h.func_code = XPT_SCAN_TGT;
else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
ccb->ccb_h.func_code = XPT_SCAN_LUN;
else {
xpt_print(ccb->ccb_h.path, "illegal scan path\n");
xpt_free_path(ccb->ccb_h.path);
xpt_free_ccb(ccb);
return;
}
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
("xpt_rescan: func %#x %s\n", ccb->ccb_h.func_code,
xpt_action_name(ccb->ccb_h.func_code)));
ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
ccb->ccb_h.cbfcnp = xpt_rescan_done;
xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
/* Don't make duplicate entries for the same paths. */
xpt_lock_buses();
if (ccb->ccb_h.ppriv_ptr1 == NULL) {
TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
wakeup(&xsoftc.ccb_scanq);
xpt_unlock_buses();
xpt_print(ccb->ccb_h.path, "rescan already queued\n");
xpt_free_path(ccb->ccb_h.path);
xpt_free_ccb(ccb);
return;
}
}
}
TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
xpt_hold_boot_locked();
wakeup(&xsoftc.ccb_scanq);
xpt_unlock_buses();
}
/* Functions accessed by the peripheral drivers */
static int
xpt_init(void *dummy)
{
struct cam_sim *xpt_sim;
struct cam_path *path;
struct cam_devq *devq;
cam_status status;
int error, i;
TAILQ_INIT(&xsoftc.xpt_busses);
TAILQ_INIT(&xsoftc.ccb_scanq);
STAILQ_INIT(&xsoftc.highpowerq);
xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
#ifdef CAM_BOOT_DELAY
/*
* Override this value at compile time to assist our users
* who don't use loader to boot a kernel.
*/
xsoftc.boot_delay = CAM_BOOT_DELAY;
#endif
/*
* The xpt layer is, itself, the equivalent of a SIM.
* Allow 16 ccbs in the ccb pool for it. This should
* give decent parallelism when we probe buses and
* perform other XPT functions.
*/
devq = cam_simq_alloc(16);
xpt_sim = cam_sim_alloc(xptaction,
xptpoll,
"xpt",
/*softc*/NULL,
/*unit*/0,
/*mtx*/NULL,
/*max_dev_transactions*/0,
/*max_tagged_dev_transactions*/0,
devq);
if (xpt_sim == NULL)
return (ENOMEM);
if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
printf("xpt_init: xpt_bus_register failed with status %#x,"
" failing attach\n", status);
return (EINVAL);
}
/*
* Looking at the XPT from the SIM layer, the XPT is
* the equivalent of a peripheral driver. Allocate
* a peripheral driver entry for us.
*/
if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
printf("xpt_init: xpt_create_path failed with status %#x,"
" failing attach\n", status);
return (EINVAL);
}
xpt_path_lock(path);
cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
path, NULL, 0, xpt_sim);
xpt_path_unlock(path);
xpt_free_path(path);
if (cam_num_doneqs < 1)
cam_num_doneqs = 1 + mp_ncpus / 6;
else if (cam_num_doneqs > MAXCPU)
cam_num_doneqs = MAXCPU;
for (i = 0; i < cam_num_doneqs; i++) {
mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
MTX_DEF);
STAILQ_INIT(&cam_doneqs[i].cam_doneq);
error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
&cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
if (error != 0) {
cam_num_doneqs = i;
break;
}
}
if (cam_num_doneqs < 1) {
printf("xpt_init: Cannot init completion queues "
"- failing attach\n");
return (ENOMEM);
}
/*
* Register a callback for when interrupts are enabled.
*/
config_intrhook_oneshot(xpt_config, NULL);
return (0);
}
static cam_status
xptregister(struct cam_periph *periph, void *arg)
{
struct cam_sim *xpt_sim;
if (periph == NULL) {
printf("xptregister: periph was NULL!!\n");
return(CAM_REQ_CMP_ERR);
}
xpt_sim = (struct cam_sim *)arg;
xpt_sim->softc = periph;
xpt_periph = periph;
periph->softc = NULL;
return(CAM_REQ_CMP);
}
int32_t
xpt_add_periph(struct cam_periph *periph)
{
struct cam_ed *device;
int32_t status;
TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
device = periph->path->device;
status = CAM_REQ_CMP;
if (device != NULL) {
mtx_lock(&device->target->bus->eb_mtx);
device->generation++;
SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
mtx_unlock(&device->target->bus->eb_mtx);
atomic_add_32(&xsoftc.xpt_generation, 1);
}
return (status);
}
void
xpt_remove_periph(struct cam_periph *periph)
{
struct cam_ed *device;
device = periph->path->device;
if (device != NULL) {
mtx_lock(&device->target->bus->eb_mtx);
device->generation++;
SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
mtx_unlock(&device->target->bus->eb_mtx);
atomic_add_32(&xsoftc.xpt_generation, 1);
}
}
void
xpt_announce_periph(struct cam_periph *periph, char *announce_string)
{
struct cam_path *path = periph->path;
struct xpt_proto *proto;
cam_periph_assert(periph, MA_OWNED);
periph->flags |= CAM_PERIPH_ANNOUNCED;
printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
periph->periph_name, periph->unit_number,
path->bus->sim->sim_name,
path->bus->sim->unit_number,
path->bus->sim->bus_id,
path->bus->path_id,
path->target->target_id,
(uintmax_t)path->device->lun_id);
printf("%s%d: ", periph->periph_name, periph->unit_number);
proto = xpt_proto_find(path->device->protocol);
if (proto)
proto->ops->announce(path->device);
else
printf("%s%d: Unknown protocol device %d\n",
periph->periph_name, periph->unit_number,
path->device->protocol);
if (path->device->serial_num_len > 0) {
/* Don't wrap the screen - print only the first 60 chars */
printf("%s%d: Serial Number %.60s\n", periph->periph_name,
periph->unit_number, path->device->serial_num);
}
/* Announce transport details. */
path->bus->xport->ops->announce(periph);
/* Announce command queueing. */
if (path->device->inq_flags & SID_CmdQue
|| path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
printf("%s%d: Command Queueing enabled\n",
periph->periph_name, periph->unit_number);
}
/* Announce caller's details if they've passed in. */
if (announce_string != NULL)
printf("%s%d: %s\n", periph->periph_name,
periph->unit_number, announce_string);
}
void
xpt_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb,
char *announce_string)
{
struct cam_path *path = periph->path;
struct xpt_proto *proto;
cam_periph_assert(periph, MA_OWNED);
periph->flags |= CAM_PERIPH_ANNOUNCED;
/* Fall back to the non-sbuf method if necessary */
if (xsoftc.announce_nosbuf != 0) {
xpt_announce_periph(periph, announce_string);
return;
}
proto = xpt_proto_find(path->device->protocol);
if (((proto != NULL) && (proto->ops->announce_sbuf == NULL)) ||
(path->bus->xport->ops->announce_sbuf == NULL)) {
xpt_announce_periph(periph, announce_string);
return;
}
sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
periph->periph_name, periph->unit_number,
path->bus->sim->sim_name,
path->bus->sim->unit_number,
path->bus->sim->bus_id,
path->bus->path_id,
path->target->target_id,
(uintmax_t)path->device->lun_id);
sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
if (proto)
proto->ops->announce_sbuf(path->device, sb);
else
sbuf_printf(sb, "%s%d: Unknown protocol device %d\n",
periph->periph_name, periph->unit_number,
path->device->protocol);
if (path->device->serial_num_len > 0) {
/* Don't wrap the screen - print only the first 60 chars */
sbuf_printf(sb, "%s%d: Serial Number %.60s\n",
periph->periph_name, periph->unit_number,
path->device->serial_num);
}
/* Announce transport details. */
path->bus->xport->ops->announce_sbuf(periph, sb);
/* Announce command queueing. */
if (path->device->inq_flags & SID_CmdQue
|| path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
sbuf_printf(sb, "%s%d: Command Queueing enabled\n",
periph->periph_name, periph->unit_number);
}
/* Announce caller's details if they've passed in. */
if (announce_string != NULL)
sbuf_printf(sb, "%s%d: %s\n", periph->periph_name,
periph->unit_number, announce_string);
}
void
xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
{
if (quirks != 0) {
printf("%s%d: quirks=0x%b\n", periph->periph_name,
periph->unit_number, quirks, bit_string);
}
}
void
xpt_announce_quirks_sbuf(struct cam_periph *periph, struct sbuf *sb,
int quirks, char *bit_string)
{
if (xsoftc.announce_nosbuf != 0) {
xpt_announce_quirks(periph, quirks, bit_string);
return;
}
if (quirks != 0) {
sbuf_printf(sb, "%s%d: quirks=0x%b\n", periph->periph_name,
periph->unit_number, quirks, bit_string);
}
}
void
xpt_denounce_periph(struct cam_periph *periph)
{
struct cam_path *path = periph->path;
struct xpt_proto *proto;
cam_periph_assert(periph, MA_OWNED);
printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
periph->periph_name, periph->unit_number,
path->bus->sim->sim_name,
path->bus->sim->unit_number,
path->bus->sim->bus_id,
path->bus->path_id,
path->target->target_id,
(uintmax_t)path->device->lun_id);
printf("%s%d: ", periph->periph_name, periph->unit_number);
proto = xpt_proto_find(path->device->protocol);
if (proto)
proto->ops->denounce(path->device);
else
printf("%s%d: Unknown protocol device %d\n",
periph->periph_name, periph->unit_number,
path->device->protocol);
if (path->device->serial_num_len > 0)
printf(" s/n %.60s", path->device->serial_num);
printf(" detached\n");
}
void
xpt_denounce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb)
{
struct cam_path *path = periph->path;
struct xpt_proto *proto;
cam_periph_assert(periph, MA_OWNED);
/* Fall back to the non-sbuf method if necessary */
if (xsoftc.announce_nosbuf != 0) {
xpt_denounce_periph(periph);
return;
}
proto = xpt_proto_find(path->device->protocol);
if ((proto != NULL) && (proto->ops->denounce_sbuf == NULL)) {
xpt_denounce_periph(periph);
return;
}
sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
periph->periph_name, periph->unit_number,
path->bus->sim->sim_name,
path->bus->sim->unit_number,
path->bus->sim->bus_id,
path->bus->path_id,
path->target->target_id,
(uintmax_t)path->device->lun_id);
sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
if (proto)
proto->ops->denounce_sbuf(path->device, sb);
else
sbuf_printf(sb, "%s%d: Unknown protocol device %d\n",
periph->periph_name, periph->unit_number,
path->device->protocol);
if (path->device->serial_num_len > 0)
sbuf_printf(sb, " s/n %.60s", path->device->serial_num);
sbuf_printf(sb, " detached\n");
}
int
xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
{
int ret = -1, l, o;
struct ccb_dev_advinfo cdai;
struct scsi_vpd_device_id *did;
struct scsi_vpd_id_descriptor *idd;
xpt_path_assert(path, MA_OWNED);
memset(&cdai, 0, sizeof(cdai));
xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
cdai.flags = CDAI_FLAG_NONE;
cdai.bufsiz = len;
cdai.buf = buf;
if (!strcmp(attr, "GEOM::ident"))
cdai.buftype = CDAI_TYPE_SERIAL_NUM;
else if (!strcmp(attr, "GEOM::physpath"))
cdai.buftype = CDAI_TYPE_PHYS_PATH;
else if (strcmp(attr, "GEOM::lunid") == 0 ||
strcmp(attr, "GEOM::lunname") == 0) {
cdai.buftype = CDAI_TYPE_SCSI_DEVID;
cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT);
if (cdai.buf == NULL) {
ret = ENOMEM;
goto out;
}
} else
goto out;
xpt_action((union ccb *)&cdai); /* can only be synchronous */
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
if (cdai.provsiz == 0)
goto out;
switch(cdai.buftype) {
case CDAI_TYPE_SCSI_DEVID:
did = (struct scsi_vpd_device_id *)cdai.buf;
if (strcmp(attr, "GEOM::lunid") == 0) {
idd = scsi_get_devid(did, cdai.provsiz,
scsi_devid_is_lun_naa);
if (idd == NULL)
idd = scsi_get_devid(did, cdai.provsiz,
scsi_devid_is_lun_eui64);
if (idd == NULL)
idd = scsi_get_devid(did, cdai.provsiz,
scsi_devid_is_lun_uuid);
if (idd == NULL)
idd = scsi_get_devid(did, cdai.provsiz,
scsi_devid_is_lun_md5);
} else
idd = NULL;
if (idd == NULL)
idd = scsi_get_devid(did, cdai.provsiz,
scsi_devid_is_lun_t10);
if (idd == NULL)
idd = scsi_get_devid(did, cdai.provsiz,
scsi_devid_is_lun_name);
if (idd == NULL)
break;
ret = 0;
if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) ==
SVPD_ID_CODESET_ASCII) {
if (idd->length < len) {
for (l = 0; l < idd->length; l++)
buf[l] = idd->identifier[l] ?
idd->identifier[l] : ' ';
buf[l] = 0;
} else
ret = EFAULT;
break;
}
if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) ==
SVPD_ID_CODESET_UTF8) {
l = strnlen(idd->identifier, idd->length);
if (l < len) {
bcopy(idd->identifier, buf, l);
buf[l] = 0;
} else
ret = EFAULT;
break;
}
if ((idd->id_type & SVPD_ID_TYPE_MASK) ==
SVPD_ID_TYPE_UUID && idd->identifier[0] == 0x10) {
if ((idd->length - 2) * 2 + 4 >= len) {
ret = EFAULT;
break;
}
for (l = 2, o = 0; l < idd->length; l++) {
if (l == 6 || l == 8 || l == 10 || l == 12)
o += sprintf(buf + o, "-");
o += sprintf(buf + o, "%02x",
idd->identifier[l]);
}
break;
}
if (idd->length * 2 < len) {
for (l = 0; l < idd->length; l++)
sprintf(buf + l * 2, "%02x",
idd->identifier[l]);
} else
ret = EFAULT;
break;
default:
if (cdai.provsiz < len) {
cdai.buf[cdai.provsiz] = 0;
ret = 0;
} else
ret = EFAULT;
break;
}
out:
if ((char *)cdai.buf != buf)
free(cdai.buf, M_CAMXPT);
return ret;
}
static dev_match_ret
xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
struct cam_eb *bus)
{
dev_match_ret retval;
u_int i;
retval = DM_RET_NONE;
/*
* If we aren't given something to match against, that's an error.
*/
if (bus == NULL)
return(DM_RET_ERROR);
/*
* If there are no match entries, then this bus matches no
* matter what.
*/
if ((patterns == NULL) || (num_patterns == 0))
return(DM_RET_DESCEND | DM_RET_COPY);
for (i = 0; i < num_patterns; i++) {
struct bus_match_pattern *cur_pattern;
/*
* If the pattern in question isn't for a bus node, we
* aren't interested. However, we do indicate to the
* calling routine that we should continue descending the
* tree, since the user wants to match against lower-level
* EDT elements.
*/
if (patterns[i].type != DEV_MATCH_BUS) {
if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
retval |= DM_RET_DESCEND;
continue;
}
cur_pattern = &patterns[i].pattern.bus_pattern;
/*
* If they want to match any bus node, we give them any
* device node.
*/
if (cur_pattern->flags == BUS_MATCH_ANY) {
/* set the copy flag */
retval |= DM_RET_COPY;
/*
* If we've already decided on an action, go ahead
* and return.
*/
if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
return(retval);
}
/*
* Not sure why someone would do this...
*/
if (cur_pattern->flags == BUS_MATCH_NONE)
continue;
if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
&& (cur_pattern->path_id != bus->path_id))
continue;
if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
&& (cur_pattern->bus_id != bus->sim->bus_id))
continue;
if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
&& (cur_pattern->unit_number != bus->sim->unit_number))
continue;
if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
&& (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
DEV_IDLEN) != 0))
continue;
/*
* If we get to this point, the user definitely wants
* information on this bus. So tell the caller to copy the
* data out.
*/
retval |= DM_RET_COPY;
/*
* If the return action has been set to descend, then we
* know that we've already seen a non-bus matching
* expression, therefore we need to further descend the tree.
* This won't change by continuing around the loop, so we
* go ahead and return. If we haven't seen a non-bus
* matching expression, we keep going around the loop until
* we exhaust the matching expressions. We'll set the stop
* flag once we fall out of the loop.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
return(retval);
}
/*
* If the return action hasn't been set to descend yet, that means
* we haven't seen anything other than bus matching patterns. So
* tell the caller to stop descending the tree -- the user doesn't
* want to match against lower level tree elements.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
retval |= DM_RET_STOP;
return(retval);
}
static dev_match_ret
xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
struct cam_ed *device)
{
dev_match_ret retval;
u_int i;
retval = DM_RET_NONE;
/*
* If we aren't given something to match against, that's an error.
*/
if (device == NULL)
return(DM_RET_ERROR);
/*
* If there are no match entries, then this device matches no
* matter what.
*/
if ((patterns == NULL) || (num_patterns == 0))
return(DM_RET_DESCEND | DM_RET_COPY);
for (i = 0; i < num_patterns; i++) {
struct device_match_pattern *cur_pattern;
struct scsi_vpd_device_id *device_id_page;
/*
* If the pattern in question isn't for a device node, we
* aren't interested.
*/
if (patterns[i].type != DEV_MATCH_DEVICE) {
if ((patterns[i].type == DEV_MATCH_PERIPH)
&& ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
retval |= DM_RET_DESCEND;
continue;
}
cur_pattern = &patterns[i].pattern.device_pattern;
/* Error out if mutually exclusive options are specified. */
if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
== (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
return(DM_RET_ERROR);
/*
* If they want to match any device node, we give them any
* device node.
*/
if (cur_pattern->flags == DEV_MATCH_ANY)
goto copy_dev_node;
/*
* Not sure why someone would do this...
*/
if (cur_pattern->flags == DEV_MATCH_NONE)
continue;
if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
&& (cur_pattern->path_id != device->target->bus->path_id))
continue;
if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
&& (cur_pattern->target_id != device->target->target_id))
continue;
if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
&& (cur_pattern->target_lun != device->lun_id))
continue;
if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
&& (cam_quirkmatch((caddr_t)&device->inq_data,
(caddr_t)&cur_pattern->data.inq_pat,
1, sizeof(cur_pattern->data.inq_pat),
scsi_static_inquiry_match) == NULL))
continue;
device_id_page = (struct scsi_vpd_device_id *)device->device_id;
if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
&& (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
|| scsi_devid_match((uint8_t *)device_id_page->desc_list,
device->device_id_len
- SVPD_DEVICE_ID_HDR_LEN,
cur_pattern->data.devid_pat.id,
cur_pattern->data.devid_pat.id_len) != 0))
continue;
copy_dev_node:
/*
* If we get to this point, the user definitely wants
* information on this device. So tell the caller to copy
* the data out.
*/
retval |= DM_RET_COPY;
/*
* If the return action has been set to descend, then we
* know that we've already seen a peripheral matching
* expression, therefore we need to further descend the tree.
* This won't change by continuing around the loop, so we
* go ahead and return. If we haven't seen a peripheral
* matching expression, we keep going around the loop until
* we exhaust the matching expressions. We'll set the stop
* flag once we fall out of the loop.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
return(retval);
}
/*
* If the return action hasn't been set to descend yet, that means
* we haven't seen any peripheral matching patterns. So tell the
* caller to stop descending the tree -- the user doesn't want to
* match against lower level tree elements.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
retval |= DM_RET_STOP;
return(retval);
}
/*
* Match a single peripheral against any number of match patterns.
*/
static dev_match_ret
xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
struct cam_periph *periph)
{
dev_match_ret retval;
u_int i;
/*
* If we aren't given something to match against, that's an error.
*/
if (periph == NULL)
return(DM_RET_ERROR);
/*
* If there are no match entries, then this peripheral matches no
* matter what.
*/
if ((patterns == NULL) || (num_patterns == 0))
return(DM_RET_STOP | DM_RET_COPY);
/*
* There aren't any nodes below a peripheral node, so there's no
* reason to descend the tree any further.
*/
retval = DM_RET_STOP;
for (i = 0; i < num_patterns; i++) {
struct periph_match_pattern *cur_pattern;
/*
* If the pattern in question isn't for a peripheral, we
* aren't interested.
*/
if (patterns[i].type != DEV_MATCH_PERIPH)
continue;
cur_pattern = &patterns[i].pattern.periph_pattern;
/*
* If they want to match on anything, then we will do so.
*/
if (cur_pattern->flags == PERIPH_MATCH_ANY) {
/* set the copy flag */
retval |= DM_RET_COPY;
/*
* We've already set the return action to stop,
* since there are no nodes below peripherals in
* the tree.
*/
return(retval);
}
/*
* Not sure why someone would do this...
*/
if (cur_pattern->flags == PERIPH_MATCH_NONE)
continue;
if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
&& (cur_pattern->path_id != periph->path->bus->path_id))
continue;
/*
* For the target and lun id's, we have to make sure the
* target and lun pointers aren't NULL. The xpt peripheral
* has a wildcard target and device.
*/
if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
&& ((periph->path->target == NULL)
||(cur_pattern->target_id != periph->path->target->target_id)))
continue;
if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
&& ((periph->path->device == NULL)
|| (cur_pattern->target_lun != periph->path->device->lun_id)))
continue;
if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
&& (cur_pattern->unit_number != periph->unit_number))
continue;
if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
&& (strncmp(cur_pattern->periph_name, periph->periph_name,
DEV_IDLEN) != 0))
continue;
/*
* If we get to this point, the user definitely wants
* information on this peripheral. So tell the caller to
* copy the data out.
*/
retval |= DM_RET_COPY;
/*
* The return action has already been set to stop, since
* peripherals don't have any nodes below them in the EDT.
*/
return(retval);
}
/*
* If we get to this point, the peripheral that was passed in
* doesn't match any of the patterns.
*/
return(retval);
}
static int
xptedtbusfunc(struct cam_eb *bus, void *arg)
{
struct ccb_dev_match *cdm;
struct cam_et *target;
dev_match_ret retval;
cdm = (struct ccb_dev_match *)arg;
/*
* If our position is for something deeper in the tree, that means
* that we've already seen this node. So, we keep going down.
*/
if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
&& (cdm->pos.cookie.bus == bus)
&& (cdm->pos.position_type & CAM_DEV_POS_TARGET)
&& (cdm->pos.cookie.target != NULL))
retval = DM_RET_DESCEND;
else
retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
/*
* If we got an error, bail out of the search.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
cdm->status = CAM_DEV_MATCH_ERROR;
return(0);
}
/*
* If the copy flag is set, copy this bus out.
*/
if (retval & DM_RET_COPY) {
int spaceleft, j;
spaceleft = cdm->match_buf_len - (cdm->num_matches *
sizeof(struct dev_match_result));
/*
* If we don't have enough space to put in another
* match result, save our position and tell the
* user there are more devices to check.
*/
if (spaceleft < sizeof(struct dev_match_result)) {
bzero(&cdm->pos, sizeof(cdm->pos));
cdm->pos.position_type =
CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
cdm->pos.cookie.bus = bus;
cdm->pos.generations[CAM_BUS_GENERATION]=
xsoftc.bus_generation;
cdm->status = CAM_DEV_MATCH_MORE;
return(0);
}
j = cdm->num_matches;
cdm->num_matches++;
cdm->matches[j].type = DEV_MATCH_BUS;
cdm->matches[j].result.bus_result.path_id = bus->path_id;
cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
cdm->matches[j].result.bus_result.unit_number =
bus->sim->unit_number;
strlcpy(cdm->matches[j].result.bus_result.dev_name,
bus->sim->sim_name,
sizeof(cdm->matches[j].result.bus_result.dev_name));
}
/*
* If the user is only interested in buses, there's no
* reason to descend to the next level in the tree.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
return(1);
/*
* If there is a target generation recorded, check it to
* make sure the target list hasn't changed.
*/
mtx_lock(&bus->eb_mtx);
if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
&& (cdm->pos.cookie.bus == bus)
&& (cdm->pos.position_type & CAM_DEV_POS_TARGET)
&& (cdm->pos.cookie.target != NULL)) {
if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
bus->generation)) {
mtx_unlock(&bus->eb_mtx);
cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
return (0);
}
target = (struct cam_et *)cdm->pos.cookie.target;
target->refcount++;
} else
target = NULL;
mtx_unlock(&bus->eb_mtx);
return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
}
static int
xptedttargetfunc(struct cam_et *target, void *arg)
{
struct ccb_dev_match *cdm;
struct cam_eb *bus;
struct cam_ed *device;
cdm = (struct ccb_dev_match *)arg;
bus = target->bus;
/*
* If there is a device list generation recorded, check it to
* make sure the device list hasn't changed.
*/
mtx_lock(&bus->eb_mtx);
if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
&& (cdm->pos.cookie.bus == bus)
&& (cdm->pos.position_type & CAM_DEV_POS_TARGET)
&& (cdm->pos.cookie.target == target)
&& (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
&& (cdm->pos.cookie.device != NULL)) {
if (cdm->pos.generations[CAM_DEV_GENERATION] !=
target->generation) {
mtx_unlock(&bus->eb_mtx);
cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
return(0);
}
device = (struct cam_ed *)cdm->pos.cookie.device;
device->refcount++;
} else
device = NULL;
mtx_unlock(&bus->eb_mtx);
return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
}
static int
xptedtdevicefunc(struct cam_ed *device, void *arg)
{
struct cam_eb *bus;
struct cam_periph *periph;
struct ccb_dev_match *cdm;
dev_match_ret retval;
cdm = (struct ccb_dev_match *)arg;
bus = device->target->bus;
/*
* If our position is for something deeper in the tree, that means
* that we've already seen this node. So, we keep going down.
*/
if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
&& (cdm->pos.cookie.device == device)
&& (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
&& (cdm->pos.cookie.periph != NULL))
retval = DM_RET_DESCEND;
else
retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
device);
if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
cdm->status = CAM_DEV_MATCH_ERROR;
return(0);
}
/*
* If the copy flag is set, copy this device out.
*/
if (retval & DM_RET_COPY) {
int spaceleft, j;
spaceleft = cdm->match_buf_len - (cdm->num_matches *
sizeof(struct dev_match_result));
/*
* If we don't have enough space to put in another
* match result, save our position and tell the
* user there are more devices to check.
*/
if (spaceleft < sizeof(struct dev_match_result)) {
bzero(&cdm->pos, sizeof(cdm->pos));
cdm->pos.position_type =
CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
cdm->pos.cookie.bus = device->target->bus;
cdm->pos.generations[CAM_BUS_GENERATION]=
xsoftc.bus_generation;
cdm->pos.cookie.target = device->target;
cdm->pos.generations[CAM_TARGET_GENERATION] =
device->target->bus->generation;
cdm->pos.cookie.device = device;
cdm->pos.generations[CAM_DEV_GENERATION] =
device->target->generation;
cdm->status = CAM_DEV_MATCH_MORE;
return(0);
}
j = cdm->num_matches;
cdm->num_matches++;
cdm->matches[j].type = DEV_MATCH_DEVICE;
cdm->matches[j].result.device_result.path_id =
device->target->bus->path_id;
cdm->matches[j].result.device_result.target_id =
device->target->target_id;
cdm->matches[j].result.device_result.target_lun =
device->lun_id;
cdm->matches[j].result.device_result.protocol =
device->protocol;
bcopy(&device->inq_data,
&cdm->matches[j].result.device_result.inq_data,
sizeof(struct scsi_inquiry_data));
bcopy(&device->ident_data,
&cdm->matches[j].result.device_result.ident_data,
sizeof(struct ata_params));
/* Let the user know whether this device is unconfigured */
if (device->flags & CAM_DEV_UNCONFIGURED)
cdm->matches[j].result.device_result.flags =
DEV_RESULT_UNCONFIGURED;
else
cdm->matches[j].result.device_result.flags =
DEV_RESULT_NOFLAG;
}
/*
* If the user isn't interested in peripherals, don't descend
* the tree any further.
*/
if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
return(1);
/*
* If there is a peripheral list generation recorded, make sure
* it hasn't changed.
*/
xpt_lock_buses();
mtx_lock(&bus->eb_mtx);
if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
&& (cdm->pos.cookie.bus == bus)
&& (cdm->pos.position_type & CAM_DEV_POS_TARGET)
&& (cdm->pos.cookie.target == device->target)
&& (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
&& (cdm->pos.cookie.device == device)
&& (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
&& (cdm->pos.cookie.periph != NULL)) {
if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
device->generation) {
mtx_unlock(&bus->eb_mtx);
xpt_unlock_buses();
cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
return(0);
}
periph = (struct cam_periph *)cdm->pos.cookie.periph;
periph->refcount++;
} else
periph = NULL;
mtx_unlock(&bus->eb_mtx);
xpt_unlock_buses();
return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
}
static int
xptedtperiphfunc(struct cam_periph *periph, void *arg)
{
struct ccb_dev_match *cdm;
dev_match_ret retval;
cdm = (struct ccb_dev_match *)arg;
retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
cdm->status = CAM_DEV_MATCH_ERROR;
return(0);
}
/*
* If the copy flag is set, copy this peripheral out.
*/
if (retval & DM_RET_COPY) {
int spaceleft, j;
size_t l;
spaceleft = cdm->match_buf_len - (cdm->num_matches *
sizeof(struct dev_match_result));
/*
* If we don't have enough space to put in another
* match result, save our position and tell the
* user there are more devices to check.
*/
if (spaceleft < sizeof(struct dev_match_result)) {
bzero(&cdm->pos, sizeof(cdm->pos));
cdm->pos.position_type =
CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
CAM_DEV_POS_PERIPH;
cdm->pos.cookie.bus = periph->path->bus;
cdm->pos.generations[CAM_BUS_GENERATION]=
xsoftc.bus_generation;
cdm->pos.cookie.target = periph->path->target;
cdm->pos.generations[CAM_TARGET_GENERATION] =
periph->path->bus->generation;
cdm->pos.cookie.device = periph->path->device;
cdm->pos.generations[CAM_DEV_GENERATION] =
periph->path->target->generation;
cdm->pos.cookie.periph = periph;
cdm->pos.generations[CAM_PERIPH_GENERATION] =
periph->path->device->generation;
cdm->status = CAM_DEV_MATCH_MORE;
return(0);
}
j = cdm->num_matches;
cdm->num_matches++;
cdm->matches[j].type = DEV_MATCH_PERIPH;
cdm->matches[j].result.periph_result.path_id =
periph->path->bus->path_id;
cdm->matches[j].result.periph_result.target_id =
periph->path->target->target_id;
cdm->matches[j].result.periph_result.target_lun =
periph->path->device->lun_id;
cdm->matches[j].result.periph_result.unit_number =
periph->unit_number;
l = sizeof(cdm->matches[j].result.periph_result.periph_name);
strlcpy(cdm->matches[j].result.periph_result.periph_name,
periph->periph_name, l);
}
return(1);
}
static int
xptedtmatch(struct ccb_dev_match *cdm)
{
struct cam_eb *bus;
int ret;
cdm->num_matches = 0;
/*
* Check the bus list generation. If it has changed, the user
* needs to reset everything and start over.
*/
xpt_lock_buses();
if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
&& (cdm->pos.cookie.bus != NULL)) {
if (cdm->pos.generations[CAM_BUS_GENERATION] !=
xsoftc.bus_generation) {
xpt_unlock_buses();
cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
return(0);
}
bus = (struct cam_eb *)cdm->pos.cookie.bus;
bus->refcount++;
} else
bus = NULL;
xpt_unlock_buses();
ret = xptbustraverse(bus, xptedtbusfunc, cdm);
/*
* If we get back 0, that means that we had to stop before fully
* traversing the EDT. It also means that one of the subroutines
* has set the status field to the proper value. If we get back 1,
* we've fully traversed the EDT and copied out any matching entries.
*/
if (ret == 1)
cdm->status = CAM_DEV_MATCH_LAST;
return(ret);
}
static int
xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
{
struct cam_periph *periph;
struct ccb_dev_match *cdm;
cdm = (struct ccb_dev_match *)arg;
xpt_lock_buses();
if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
&& (cdm->pos.cookie.pdrv == pdrv)
&& (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
&& (cdm->pos.cookie.periph != NULL)) {
if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
(*pdrv)->generation) {
xpt_unlock_buses();
cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
return(0);
}
periph = (struct cam_periph *)cdm->pos.cookie.periph;
periph->refcount++;
} else
periph = NULL;
xpt_unlock_buses();
return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
}
static int
xptplistperiphfunc(struct cam_periph *periph, void *arg)
{
struct ccb_dev_match *cdm;
dev_match_ret retval;
cdm = (struct ccb_dev_match *)arg;
retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
cdm->status = CAM_DEV_MATCH_ERROR;
return(0);
}
/*
* If the copy flag is set, copy this peripheral out.
*/
if (retval & DM_RET_COPY) {
int spaceleft, j;
size_t l;
spaceleft = cdm->match_buf_len - (cdm->num_matches *
sizeof(struct dev_match_result));
/*
* If we don't have enough space to put in another
* match result, save our position and tell the
* user there are more devices to check.
*/
if (spaceleft < sizeof(struct dev_match_result)) {
struct periph_driver **pdrv;
pdrv = NULL;
bzero(&cdm->pos, sizeof(cdm->pos));
cdm->pos.position_type =
CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
CAM_DEV_POS_PERIPH;
/*
* This may look a bit non-sensical, but it is
* actually quite logical. There are very few
* peripheral drivers, and bloating every peripheral
* structure with a pointer back to its parent
* peripheral driver linker set entry would cost
* more in the long run than doing this quick lookup.
*/
for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
if (strcmp((*pdrv)->driver_name,
periph->periph_name) == 0)
break;
}
if (*pdrv == NULL) {
cdm->status = CAM_DEV_MATCH_ERROR;
return(0);
}
cdm->pos.cookie.pdrv = pdrv;
/*
* The periph generation slot does double duty, as
* does the periph pointer slot. They are used for
* both edt and pdrv lookups and positioning.
*/
cdm->pos.cookie.periph = periph;
cdm->pos.generations[CAM_PERIPH_GENERATION] =
(*pdrv)->generation;
cdm->status = CAM_DEV_MATCH_MORE;
return(0);
}
j = cdm->num_matches;
cdm->num_matches++;
cdm->matches[j].type = DEV_MATCH_PERIPH;
cdm->matches[j].result.periph_result.path_id =
periph->path->bus->path_id;
/*
* The transport layer peripheral doesn't have a target or
* lun.
*/
if (periph->path->target)
cdm->matches[j].result.periph_result.target_id =
periph->path->target->target_id;
else
cdm->matches[j].result.periph_result.target_id =
CAM_TARGET_WILDCARD;
if (periph->path->device)
cdm->matches[j].result.periph_result.target_lun =
periph->path->device->lun_id;
else
cdm->matches[j].result.periph_result.target_lun =
CAM_LUN_WILDCARD;
cdm->matches[j].result.periph_result.unit_number =
periph->unit_number;
l = sizeof(cdm->matches[j].result.periph_result.periph_name);
strlcpy(cdm->matches[j].result.periph_result.periph_name,
periph->periph_name, l);
}
return(1);
}
static int
xptperiphlistmatch(struct ccb_dev_match *cdm)
{
int ret;
cdm->num_matches = 0;
/*
* At this point in the edt traversal function, we check the bus
* list generation to make sure that no buses have been added or
* removed since the user last sent a XPT_DEV_MATCH ccb through.
* For the peripheral driver list traversal function, however, we
* don't have to worry about new peripheral driver types coming or
* going; they're in a linker set, and therefore can't change
* without a recompile.
*/
if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
&& (cdm->pos.cookie.pdrv != NULL))
ret = xptpdrvtraverse(
(struct periph_driver **)cdm->pos.cookie.pdrv,
xptplistpdrvfunc, cdm);
else
ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
/*
* If we get back 0, that means that we had to stop before fully
* traversing the peripheral driver tree. It also means that one of
* the subroutines has set the status field to the proper value. If
* we get back 1, we've fully traversed the EDT and copied out any
* matching entries.
*/
if (ret == 1)
cdm->status = CAM_DEV_MATCH_LAST;
return(ret);
}
static int
xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
{
struct cam_eb *bus, *next_bus;
int retval;
retval = 1;
if (start_bus)
bus = start_bus;
else {
xpt_lock_buses();
bus = TAILQ_FIRST(&xsoftc.xpt_busses);
if (bus == NULL) {
xpt_unlock_buses();
return (retval);
}
bus->refcount++;
xpt_unlock_buses();
}
for (; bus != NULL; bus = next_bus) {
retval = tr_func(bus, arg);
if (retval == 0) {
xpt_release_bus(bus);
break;
}
xpt_lock_buses();
next_bus = TAILQ_NEXT(bus, links);
if (next_bus)
next_bus->refcount++;
xpt_unlock_buses();
xpt_release_bus(bus);
}
return(retval);
}
static int
xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
xpt_targetfunc_t *tr_func, void *arg)
{
struct cam_et *target, *next_target;
int retval;
retval = 1;
if (start_target)
target = start_target;
else {
mtx_lock(&bus->eb_mtx);
target = TAILQ_FIRST(&bus->et_entries);
if (target == NULL) {
mtx_unlock(&bus->eb_mtx);
return (retval);
}
target->refcount++;
mtx_unlock(&bus->eb_mtx);
}
for (; target != NULL; target = next_target) {
retval = tr_func(target, arg);
if (retval == 0) {
xpt_release_target(target);
break;
}
mtx_lock(&bus->eb_mtx);
next_target = TAILQ_NEXT(target, links);
if (next_target)
next_target->refcount++;
mtx_unlock(&bus->eb_mtx);
xpt_release_target(target);
}
return(retval);
}
static int
xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
xpt_devicefunc_t *tr_func, void *arg)
{
struct cam_eb *bus;
struct cam_ed *device, *next_device;
int retval;
retval = 1;
bus = target->bus;
if (start_device)
device = start_device;
else {
mtx_lock(&bus->eb_mtx);
device = TAILQ_FIRST(&target->ed_entries);
if (device == NULL) {
mtx_unlock(&bus->eb_mtx);
return (retval);
}
device->refcount++;
mtx_unlock(&bus->eb_mtx);
}
for (; device != NULL; device = next_device) {
mtx_lock(&device->device_mtx);
retval = tr_func(device, arg);
mtx_unlock(&device->device_mtx);
if (retval == 0) {
xpt_release_device(device);
break;
}
mtx_lock(&bus->eb_mtx);
next_device = TAILQ_NEXT(device, links);
if (next_device)
next_device->refcount++;
mtx_unlock(&bus->eb_mtx);
xpt_release_device(device);
}
return(retval);
}
static int
xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
xpt_periphfunc_t *tr_func, void *arg)
{
struct cam_eb *bus;
struct cam_periph *periph, *next_periph;
int retval;
retval = 1;
bus = device->target->bus;
if (start_periph)
periph = start_periph;
else {
xpt_lock_buses();
mtx_lock(&bus->eb_mtx);
periph = SLIST_FIRST(&device->periphs);
while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
periph = SLIST_NEXT(periph, periph_links);
if (periph == NULL) {
mtx_unlock(&bus->eb_mtx);
xpt_unlock_buses();
return (retval);
}
periph->refcount++;
mtx_unlock(&bus->eb_mtx);
xpt_unlock_buses();
}
for (; periph != NULL; periph = next_periph) {
retval = tr_func(periph, arg);
if (retval == 0) {
cam_periph_release_locked(periph);
break;
}
xpt_lock_buses();
mtx_lock(&bus->eb_mtx);
next_periph = SLIST_NEXT(periph, periph_links);
while (next_periph != NULL &&
(next_periph->flags & CAM_PERIPH_FREE) != 0)
next_periph = SLIST_NEXT(next_periph, periph_links);
if (next_periph)
next_periph->refcount++;
mtx_unlock(&bus->eb_mtx);
xpt_unlock_buses();
cam_periph_release_locked(periph);
}
return(retval);
}
static int
xptpdrvtraverse(struct periph_driver **start_pdrv,
xpt_pdrvfunc_t *tr_func, void *arg)
{
struct periph_driver **pdrv;
int retval;
retval = 1;
/*
* We don't traverse the peripheral driver list like we do the
* other lists, because it is a linker set, and therefore cannot be
* changed during runtime. If the peripheral driver list is ever
* re-done to be something other than a linker set (i.e. it can
* change while the system is running), the list traversal should
* be modified to work like the other traversal functions.
*/
for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
*pdrv != NULL; pdrv++) {
retval = tr_func(pdrv, arg);
if (retval == 0)
return(retval);
}
return(retval);
}
static int
xptpdperiphtraverse(struct periph_driver **pdrv,
struct cam_periph *start_periph,
xpt_periphfunc_t *tr_func, void *arg)
{
struct cam_periph *periph, *next_periph;
int retval;
retval = 1;
if (start_periph)
periph = start_periph;
else {
xpt_lock_buses();
periph = TAILQ_FIRST(&(*pdrv)->units);
while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
periph = TAILQ_NEXT(periph, unit_links);
if (periph == NULL) {
xpt_unlock_buses();
return (retval);
}
periph->refcount++;
xpt_unlock_buses();
}
for (; periph != NULL; periph = next_periph) {
cam_periph_lock(periph);
retval = tr_func(periph, arg);
cam_periph_unlock(periph);
if (retval == 0) {
cam_periph_release(periph);
break;
}
xpt_lock_buses();
next_periph = TAILQ_NEXT(periph, unit_links);
while (next_periph != NULL &&
(next_periph->flags & CAM_PERIPH_FREE) != 0)
next_periph = TAILQ_NEXT(next_periph, unit_links);
if (next_periph)
next_periph->refcount++;
xpt_unlock_buses();
cam_periph_release(periph);
}
return(retval);
}
static int
xptdefbusfunc(struct cam_eb *bus, void *arg)
{
struct xpt_traverse_config *tr_config;
tr_config = (struct xpt_traverse_config *)arg;
if (tr_config->depth == XPT_DEPTH_BUS) {
xpt_busfunc_t *tr_func;
tr_func = (xpt_busfunc_t *)tr_config->tr_func;
return(tr_func(bus, tr_config->tr_arg));
} else
return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
}
static int
xptdeftargetfunc(struct cam_et *target, void *arg)
{
struct xpt_traverse_config *tr_config;
tr_config = (struct xpt_traverse_config *)arg;
if (tr_config->depth == XPT_DEPTH_TARGET) {
xpt_targetfunc_t *tr_func;
tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
return(tr_func(target, tr_config->tr_arg));
} else
return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
}
static int
xptdefdevicefunc(struct cam_ed *device, void *arg)
{
struct xpt_traverse_config *tr_config;
tr_config = (struct xpt_traverse_config *)arg;
if (tr_config->depth == XPT_DEPTH_DEVICE) {
xpt_devicefunc_t *tr_func;
tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
return(tr_func(device, tr_config->tr_arg));
} else
return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
}
static int
xptdefperiphfunc(struct cam_periph *periph, void *arg)
{
struct xpt_traverse_config *tr_config;
xpt_periphfunc_t *tr_func;
tr_config = (struct xpt_traverse_config *)arg;
tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
/*
* Unlike the other default functions, we don't check for depth
* here. The peripheral driver level is the last level in the EDT,
* so if we're here, we should execute the function in question.
*/
return(tr_func(periph, tr_config->tr_arg));
}
/*
* Execute the given function for every bus in the EDT.
*/
static int
xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
{
struct xpt_traverse_config tr_config;
tr_config.depth = XPT_DEPTH_BUS;
tr_config.tr_func = tr_func;
tr_config.tr_arg = arg;
return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
}
/*
* Execute the given function for every device in the EDT.
*/
static int
xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
{
struct xpt_traverse_config tr_config;
tr_config.depth = XPT_DEPTH_DEVICE;
tr_config.tr_func = tr_func;
tr_config.tr_arg = arg;
return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
}
static int
xptsetasyncfunc(struct cam_ed *device, void *arg)
{
struct cam_path path;
struct ccb_getdev cgd;
struct ccb_setasync *csa = (struct ccb_setasync *)arg;
/*
* Don't report unconfigured devices (Wildcard devs,
* devices only for target mode, device instances
* that have been invalidated but are waiting for
* their last reference count to be released).
*/
if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
return (1);
xpt_compile_path(&path,
NULL,
device->target->bus->path_id,
device->target->target_id,
device->lun_id);
xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
cgd.ccb_h.func_code = XPT_GDEV_TYPE;
xpt_action((union ccb *)&cgd);
csa->callback(csa->callback_arg,
AC_FOUND_DEVICE,
&path, &cgd);
xpt_release_path(&path);
return(1);
}
static int
xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
{
struct cam_path path;
struct ccb_pathinq cpi;
struct ccb_setasync *csa = (struct ccb_setasync *)arg;
xpt_compile_path(&path, /*periph*/NULL,
bus->path_id,
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD);
xpt_path_lock(&path);
xpt_path_inq(&cpi, &path);
csa->callback(csa->callback_arg,
AC_PATH_REGISTERED,
&path, &cpi);
xpt_path_unlock(&path);
xpt_release_path(&path);
return(1);
}
void
xpt_action(union ccb *start_ccb)
{
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
("xpt_action: func %#x %s\n", start_ccb->ccb_h.func_code,
xpt_action_name(start_ccb->ccb_h.func_code)));
start_ccb->ccb_h.status = CAM_REQ_INPROG;
(*(start_ccb->ccb_h.path->bus->xport->ops->action))(start_ccb);
}
void
xpt_action_default(union ccb *start_ccb)
{
struct cam_path *path;
struct cam_sim *sim;
struct mtx *mtx;
path = start_ccb->ccb_h.path;
CAM_DEBUG(path, CAM_DEBUG_TRACE,
("xpt_action_default: func %#x %s\n", start_ccb->ccb_h.func_code,
xpt_action_name(start_ccb->ccb_h.func_code)));
switch (start_ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
{
struct cam_ed *device;
/*
* For the sake of compatibility with SCSI-1
* devices that may not understand the identify
* message, we include lun information in the
* second byte of all commands. SCSI-1 specifies
* that luns are a 3 bit value and reserves only 3
* bits for lun information in the CDB. Later
* revisions of the SCSI spec allow for more than 8
* luns, but have deprecated lun information in the
* CDB. So, if the lun won't fit, we must omit.
*
* Also be aware that during initial probing for devices,
* the inquiry information is unknown but initialized to 0.
* This means that this code will be exercised while probing
* devices with an ANSI revision greater than 2.
*/
device = path->device;
if (device->protocol_version <= SCSI_REV_2
&& start_ccb->ccb_h.target_lun < 8
&& (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
start_ccb->csio.cdb_io.cdb_bytes[1] |=
start_ccb->ccb_h.target_lun << 5;
}
start_ccb->csio.scsi_status = SCSI_STATUS_OK;
}
/* FALLTHROUGH */
case XPT_TARGET_IO:
case XPT_CONT_TARGET_IO:
start_ccb->csio.sense_resid = 0;
start_ccb->csio.resid = 0;
/* FALLTHROUGH */
case XPT_ATA_IO:
if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
start_ccb->ataio.resid = 0;
/* FALLTHROUGH */
case XPT_NVME_IO:
case XPT_NVME_ADMIN:
case XPT_MMC_IO:
case XPT_RESET_DEV:
case XPT_ENG_EXEC:
case XPT_SMP_IO:
{
struct cam_devq *devq;
devq = path->bus->sim->devq;
mtx_lock(&devq->send_mtx);
cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
if (xpt_schedule_devq(devq, path->device) != 0)
xpt_run_devq(devq);
mtx_unlock(&devq->send_mtx);
break;
}
case XPT_CALC_GEOMETRY:
/* Filter out garbage */
if (start_ccb->ccg.block_size == 0
|| start_ccb->ccg.volume_size == 0) {
start_ccb->ccg.cylinders = 0;
start_ccb->ccg.heads = 0;
start_ccb->ccg.secs_per_track = 0;
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
goto call_sim;
case XPT_ABORT:
{
union ccb* abort_ccb;
abort_ccb = start_ccb->cab.abort_ccb;
if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
struct cam_ed *device;
struct cam_devq *devq;
device = abort_ccb->ccb_h.path->device;
devq = device->sim->devq;
mtx_lock(&devq->send_mtx);
if (abort_ccb->ccb_h.pinfo.index > 0) {
cam_ccbq_remove_ccb(&device->ccbq, abort_ccb);
abort_ccb->ccb_h.status =
CAM_REQ_ABORTED|CAM_DEV_QFRZN;
xpt_freeze_devq_device(device, 1);
mtx_unlock(&devq->send_mtx);
xpt_done(abort_ccb);
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
mtx_unlock(&devq->send_mtx);
if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
&& (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
/*
* We've caught this ccb en route to
* the SIM. Flag it for abort and the
* SIM will do so just before starting
* real work on the CCB.
*/
abort_ccb->ccb_h.status =
CAM_REQ_ABORTED|CAM_DEV_QFRZN;
xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
}
if (XPT_FC_IS_QUEUED(abort_ccb)
&& (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
/*
* It's already completed but waiting
* for our SWI to get to it.
*/
start_ccb->ccb_h.status = CAM_UA_ABORT;
break;
}
/*
* If we weren't able to take care of the abort request
* in the XPT, pass the request down to the SIM for processing.
*/
}
/* FALLTHROUGH */
case XPT_ACCEPT_TARGET_IO:
case XPT_EN_LUN:
case XPT_IMMED_NOTIFY:
case XPT_NOTIFY_ACK:
case XPT_RESET_BUS:
case XPT_IMMEDIATE_NOTIFY:
case XPT_NOTIFY_ACKNOWLEDGE:
case XPT_GET_SIM_KNOB_OLD:
case XPT_GET_SIM_KNOB:
case XPT_SET_SIM_KNOB:
case XPT_GET_TRAN_SETTINGS:
case XPT_SET_TRAN_SETTINGS:
case XPT_PATH_INQ:
call_sim:
sim = path->bus->sim;
mtx = sim->mtx;
if (mtx && !mtx_owned(mtx))
mtx_lock(mtx);
else
mtx = NULL;
CAM_DEBUG(path, CAM_DEBUG_TRACE,
("Calling sim->sim_action(): func=%#x\n", start_ccb->ccb_h.func_code));
(*(sim->sim_action))(sim, start_ccb);
CAM_DEBUG(path, CAM_DEBUG_TRACE,
("sim->sim_action returned: status=%#x\n", start_ccb->ccb_h.status));
if (mtx)
mtx_unlock(mtx);
break;
case XPT_PATH_STATS:
start_ccb->cpis.last_reset = path->bus->last_reset;
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_GDEV_TYPE:
{
struct cam_ed *dev;
dev = path->device;
if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
} else {
struct ccb_getdev *cgd;
cgd = &start_ccb->cgd;
cgd->protocol = dev->protocol;
cgd->inq_data = dev->inq_data;
cgd->ident_data = dev->ident_data;
cgd->inq_flags = dev->inq_flags;
cgd->ccb_h.status = CAM_REQ_CMP;
cgd->serial_num_len = dev->serial_num_len;
if ((dev->serial_num_len > 0)
&& (dev->serial_num != NULL))
bcopy(dev->serial_num, cgd->serial_num,
dev->serial_num_len);
}
break;
}
case XPT_GDEV_STATS:
{
struct ccb_getdevstats *cgds = &start_ccb->cgds;
struct cam_ed *dev = path->device;
struct cam_eb *bus = path->bus;
struct cam_et *tar = path->target;
struct cam_devq *devq = bus->sim->devq;
mtx_lock(&devq->send_mtx);
cgds->dev_openings = dev->ccbq.dev_openings;
cgds->dev_active = dev->ccbq.dev_active;
cgds->allocated = dev->ccbq.allocated;
cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
cgds->held = cgds->allocated - cgds->dev_active - cgds->queued;
cgds->last_reset = tar->last_reset;
cgds->maxtags = dev->maxtags;
cgds->mintags = dev->mintags;
if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
cgds->last_reset = bus->last_reset;
mtx_unlock(&devq->send_mtx);
cgds->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_GDEVLIST:
{
struct cam_periph *nperiph;
struct periph_list *periph_head;
struct ccb_getdevlist *cgdl;
u_int i;
struct cam_ed *device;
int found;
found = 0;
/*
* Don't want anyone mucking with our data.
*/
device = path->device;
periph_head = &device->periphs;
cgdl = &start_ccb->cgdl;
/*
* Check and see if the list has changed since the user
* last requested a list member. If so, tell them that the
* list has changed, and therefore they need to start over
* from the beginning.
*/
if ((cgdl->index != 0) &&
(cgdl->generation != device->generation)) {
cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
break;
}
/*
* Traverse the list of peripherals and attempt to find
* the requested peripheral.
*/
for (nperiph = SLIST_FIRST(periph_head), i = 0;
(nperiph != NULL) && (i <= cgdl->index);
nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
if (i == cgdl->index) {
strlcpy(cgdl->periph_name,
nperiph->periph_name,
sizeof(cgdl->periph_name));
cgdl->unit_number = nperiph->unit_number;
found = 1;
}
}
if (found == 0) {
cgdl->status = CAM_GDEVLIST_ERROR;
break;
}
if (nperiph == NULL)
cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
else
cgdl->status = CAM_GDEVLIST_MORE_DEVS;
cgdl->index++;
cgdl->generation = device->generation;
cgdl->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_DEV_MATCH:
{
dev_pos_type position_type;
struct ccb_dev_match *cdm;
cdm = &start_ccb->cdm;
/*
* There are two ways of getting at information in the EDT.
* The first way is via the primary EDT tree. It starts
* with a list of buses, then a list of targets on a bus,
* then devices/luns on a target, and then peripherals on a
* device/lun. The "other" way is by the peripheral driver
* lists. The peripheral driver lists are organized by
* peripheral driver. (obviously) So it makes sense to
* use the peripheral driver list if the user is looking
* for something like "da1", or all "da" devices. If the
* user is looking for something on a particular bus/target
* or lun, it's generally better to go through the EDT tree.
*/
if (cdm->pos.position_type != CAM_DEV_POS_NONE)
position_type = cdm->pos.position_type;
else {
u_int i;
position_type = CAM_DEV_POS_NONE;
for (i = 0; i < cdm->num_patterns; i++) {
if ((cdm->patterns[i].type == DEV_MATCH_BUS)
||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
position_type = CAM_DEV_POS_EDT;
break;
}
}
if (cdm->num_patterns == 0)
position_type = CAM_DEV_POS_EDT;
else if (position_type == CAM_DEV_POS_NONE)
position_type = CAM_DEV_POS_PDRV;
}
switch(position_type & CAM_DEV_POS_TYPEMASK) {
case CAM_DEV_POS_EDT:
xptedtmatch(cdm);
break;
case CAM_DEV_POS_PDRV:
xptperiphlistmatch(cdm);
break;
default:
cdm->status = CAM_DEV_MATCH_ERROR;
break;
}
if (cdm->status == CAM_DEV_MATCH_ERROR)
start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
else
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SASYNC_CB:
{
struct ccb_setasync *csa;
struct async_node *cur_entry;
struct async_list *async_head;
u_int32_t added;
csa = &start_ccb->csa;
added = csa->event_enable;
async_head = &path->device->asyncs;
/*
* If there is already an entry for us, simply
* update it.
*/
cur_entry = SLIST_FIRST(async_head);
while (cur_entry != NULL) {
if ((cur_entry->callback_arg == csa->callback_arg)
&& (cur_entry->callback == csa->callback))
break;
cur_entry = SLIST_NEXT(cur_entry, links);
}
if (cur_entry != NULL) {
/*
* If the request has no flags set,
* remove the entry.
*/
added &= ~cur_entry->event_enable;
if (csa->event_enable == 0) {
SLIST_REMOVE(async_head, cur_entry,
async_node, links);
xpt_release_device(path->device);
free(cur_entry, M_CAMXPT);
} else {
cur_entry->event_enable = csa->event_enable;
}
csa->event_enable = added;
} else {
cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
M_NOWAIT);
if (cur_entry == NULL) {
csa->ccb_h.status = CAM_RESRC_UNAVAIL;
break;
}
cur_entry->event_enable = csa->event_enable;
cur_entry->event_lock = (path->bus->sim->mtx &&
mtx_owned(path->bus->sim->mtx)) ? 1 : 0;
cur_entry->callback_arg = csa->callback_arg;
cur_entry->callback = csa->callback;
SLIST_INSERT_HEAD(async_head, cur_entry, links);
xpt_acquire_device(path->device);
}
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_REL_SIMQ:
{
struct ccb_relsim *crs;
struct cam_ed *dev;
crs = &start_ccb->crs;
dev = path->device;
if (dev == NULL) {
crs->ccb_h.status = CAM_DEV_NOT_THERE;
break;
}
if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
/* Don't ever go below one opening */
if (crs->openings > 0) {
xpt_dev_ccbq_resize(path, crs->openings);
if (bootverbose) {
xpt_print(path,
"number of openings is now %d\n",
crs->openings);
}
}
}
mtx_lock(&dev->sim->devq->send_mtx);
if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
/*
* Just extend the old timeout and decrement
* the freeze count so that a single timeout
* is sufficient for releasing the queue.
*/
start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
callout_stop(&dev->callout);
} else {
start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
}
callout_reset_sbt(&dev->callout,
SBT_1MS * crs->release_timeout, 0,
xpt_release_devq_timeout, dev, 0);
dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
}
if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
/*
* Decrement the freeze count so that a single
* completion is still sufficient to unfreeze
* the queue.
*/
start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
} else {
dev->flags |= CAM_DEV_REL_ON_COMPLETE;
start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
}
}
if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
|| (dev->ccbq.dev_active == 0)) {
start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
} else {
dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
}
}
mtx_unlock(&dev->sim->devq->send_mtx);
if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_DEBUG: {
struct cam_path *oldpath;
/* Check that all request bits are supported. */
if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
break;
}
cam_dflags = CAM_DEBUG_NONE;
if (cam_dpath != NULL) {
oldpath = cam_dpath;
cam_dpath = NULL;
xpt_free_path(oldpath);
}
if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
if (xpt_create_path(&cam_dpath, NULL,
start_ccb->ccb_h.path_id,
start_ccb->ccb_h.target_id,
start_ccb->ccb_h.target_lun) !=
CAM_REQ_CMP) {
start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
} else {
cam_dflags = start_ccb->cdbg.flags;
start_ccb->ccb_h.status = CAM_REQ_CMP;
xpt_print(cam_dpath, "debugging flags now %x\n",
cam_dflags);
}
} else
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_NOOP:
if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
xpt_freeze_devq(path, 1);
start_ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_REPROBE_LUN:
xpt_async(AC_INQ_CHANGED, path, NULL);
start_ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(start_ccb);
break;
case XPT_ASYNC:
start_ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(start_ccb);
break;
default:
case XPT_SDEV_TYPE:
case XPT_TERM_IO:
case XPT_ENG_INQ:
/* XXX Implement */
xpt_print(start_ccb->ccb_h.path,
"%s: CCB type %#x %s not supported\n", __func__,
start_ccb->ccb_h.func_code,
xpt_action_name(start_ccb->ccb_h.func_code));
start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
xpt_done(start_ccb);
}
break;
}
CAM_DEBUG(path, CAM_DEBUG_TRACE,
("xpt_action_default: func= %#x %s status %#x\n",
start_ccb->ccb_h.func_code,
xpt_action_name(start_ccb->ccb_h.func_code),
start_ccb->ccb_h.status));
}
/*
* Call the sim poll routine to allow the sim to complete
* any inflight requests, then call camisr_runqueue to
* complete any CCB that the polling completed.
*/
void
xpt_sim_poll(struct cam_sim *sim)
{
struct mtx *mtx;
mtx = sim->mtx;
if (mtx)
mtx_lock(mtx);
(*(sim->sim_poll))(sim);
if (mtx)
mtx_unlock(mtx);
camisr_runqueue();
}
uint32_t
xpt_poll_setup(union ccb *start_ccb)
{
u_int32_t timeout;
struct cam_sim *sim;
struct cam_devq *devq;
struct cam_ed *dev;
timeout = start_ccb->ccb_h.timeout * 10;
sim = start_ccb->ccb_h.path->bus->sim;
devq = sim->devq;
dev = start_ccb->ccb_h.path->device;
/*
* Steal an opening so that no other queued requests
* can get it before us while we simulate interrupts.
*/
mtx_lock(&devq->send_mtx);
dev->ccbq.dev_openings--;
while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
(--timeout > 0)) {
mtx_unlock(&devq->send_mtx);
DELAY(100);
xpt_sim_poll(sim);
mtx_lock(&devq->send_mtx);
}
dev->ccbq.dev_openings++;
mtx_unlock(&devq->send_mtx);
return (timeout);
}
void
xpt_pollwait(union ccb *start_ccb, uint32_t timeout)
{
while (--timeout > 0) {
xpt_sim_poll(start_ccb->ccb_h.path->bus->sim);
if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
!= CAM_REQ_INPROG)
break;
DELAY(100);
}
if (timeout == 0) {
/*
* XXX Is it worth adding a sim_timeout entry
* point so we can attempt recovery? If
* this is only used for dumps, I don't think
* it is.
*/
start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
}
}
void
xpt_polled_action(union ccb *start_ccb)
{
uint32_t timeout;
struct cam_ed *dev;
timeout = start_ccb->ccb_h.timeout * 10;
dev = start_ccb->ccb_h.path->device;
mtx_unlock(&dev->device_mtx);
timeout = xpt_poll_setup(start_ccb);
if (timeout > 0) {
xpt_action(start_ccb);
xpt_pollwait(start_ccb, timeout);
} else {
start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
}
mtx_lock(&dev->device_mtx);
}
/*
* Schedule a peripheral driver to receive a ccb when its
* target device has space for more transactions.
*/
void
xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
{
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
cam_periph_assert(periph, MA_OWNED);
if (new_priority < periph->scheduled_priority) {
periph->scheduled_priority = new_priority;
xpt_run_allocq(periph, 0);
}
}
/*
* Schedule a device to run on a given queue.
* If the device was inserted as a new entry on the queue,
* return 1 meaning the device queue should be run. If we
* were already queued, implying someone else has already
* started the queue, return 0 so the caller doesn't attempt
* to run the queue.
*/
static int
xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
u_int32_t new_priority)
{
int retval;
u_int32_t old_priority;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
old_priority = pinfo->priority;
/*
* Are we already queued?
*/
if (pinfo->index != CAM_UNQUEUED_INDEX) {
/* Simply reorder based on new priority */
if (new_priority < old_priority) {
camq_change_priority(queue, pinfo->index,
new_priority);
CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
("changed priority to %d\n",
new_priority));
retval = 1;
} else
retval = 0;
} else {
/* New entry on the queue */
if (new_priority < old_priority)
pinfo->priority = new_priority;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
("Inserting onto queue\n"));
pinfo->generation = ++queue->generation;
camq_insert(queue, pinfo);
retval = 1;
}
return (retval);
}
static void
xpt_run_allocq_task(void *context, int pending)
{
struct cam_periph *periph = context;
cam_periph_lock(periph);
periph->flags &= ~CAM_PERIPH_RUN_TASK;
xpt_run_allocq(periph, 1);
cam_periph_unlock(periph);
cam_periph_release(periph);
}
static void
xpt_run_allocq(struct cam_periph *periph, int sleep)
{
struct cam_ed *device;
union ccb *ccb;
uint32_t prio;
cam_periph_assert(periph, MA_OWNED);
if (periph->periph_allocating)
return;
cam_periph_doacquire(periph);
periph->periph_allocating = 1;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
device = periph->path->device;
ccb = NULL;
restart:
while ((prio = min(periph->scheduled_priority,
periph->immediate_priority)) != CAM_PRIORITY_NONE &&
(periph->periph_allocated - (ccb != NULL ? 1 : 0) <
device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
if (ccb == NULL &&
(ccb = xpt_get_ccb_nowait(periph)) == NULL) {
if (sleep) {
ccb = xpt_get_ccb(periph);
goto restart;
}
if (periph->flags & CAM_PERIPH_RUN_TASK)
break;
cam_periph_doacquire(periph);
periph->flags |= CAM_PERIPH_RUN_TASK;
taskqueue_enqueue(xsoftc.xpt_taskq,
&periph->periph_run_task);
break;
}
xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
if (prio == periph->immediate_priority) {
periph->immediate_priority = CAM_PRIORITY_NONE;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
("waking cam_periph_getccb()\n"));
SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
periph_links.sle);
wakeup(&periph->ccb_list);
} else {
periph->scheduled_priority = CAM_PRIORITY_NONE;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
("calling periph_start()\n"));
periph->periph_start(periph, ccb);
}
ccb = NULL;
}
if (ccb != NULL)
xpt_release_ccb(ccb);
periph->periph_allocating = 0;
cam_periph_release_locked(periph);
}
static void
xpt_run_devq(struct cam_devq *devq)
{
struct mtx *mtx;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
devq->send_queue.qfrozen_cnt++;
while ((devq->send_queue.entries > 0)
&& (devq->send_openings > 0)
&& (devq->send_queue.qfrozen_cnt <= 1)) {
struct cam_ed *device;
union ccb *work_ccb;
struct cam_sim *sim;
struct xpt_proto *proto;
device = (struct cam_ed *)camq_remove(&devq->send_queue,
CAMQ_HEAD);
CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
("running device %p\n", device));
work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
if (work_ccb == NULL) {
printf("device on run queue with no ccbs???\n");
continue;
}
if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
mtx_lock(&xsoftc.xpt_highpower_lock);
if (xsoftc.num_highpower <= 0) {
/*
* We got a high power command, but we
* don't have any available slots. Freeze
* the device queue until we have a slot
* available.
*/
xpt_freeze_devq_device(device, 1);
STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
highpowerq_entry);
mtx_unlock(&xsoftc.xpt_highpower_lock);
continue;
} else {
/*
* Consume a high power slot while
* this ccb runs.
*/
xsoftc.num_highpower--;
}
mtx_unlock(&xsoftc.xpt_highpower_lock);
}
cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
cam_ccbq_send_ccb(&device->ccbq, work_ccb);
devq->send_openings--;
devq->send_active++;
xpt_schedule_devq(devq, device);
mtx_unlock(&devq->send_mtx);
if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
/*
* The client wants to freeze the queue
* after this CCB is sent.
*/
xpt_freeze_devq(work_ccb->ccb_h.path, 1);
}
/* In Target mode, the peripheral driver knows best... */
if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
if ((device->inq_flags & SID_CmdQue) != 0
&& work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
else
/*
* Clear this in case of a retried CCB that
* failed due to a rejected tag.
*/
work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
}
KASSERT(device == work_ccb->ccb_h.path->device,
("device (%p) / path->device (%p) mismatch",
device, work_ccb->ccb_h.path->device));
proto = xpt_proto_find(device->protocol);
if (proto && proto->ops->debug_out)
proto->ops->debug_out(work_ccb);
/*
* Device queues can be shared among multiple SIM instances
* that reside on different buses. Use the SIM from the
* queued device, rather than the one from the calling bus.
*/
sim = device->sim;
mtx = sim->mtx;
if (mtx && !mtx_owned(mtx))
mtx_lock(mtx);
else
mtx = NULL;
work_ccb->ccb_h.qos.periph_data = cam_iosched_now();
(*(sim->sim_action))(sim, work_ccb);
if (mtx)
mtx_unlock(mtx);
mtx_lock(&devq->send_mtx);
}
devq->send_queue.qfrozen_cnt--;
}
/*
* This function merges stuff from the src ccb into the dst ccb, while keeping
* important fields in the dst ccb constant.
*/
void
xpt_merge_ccb(union ccb *dst_ccb, union ccb *src_ccb)
{
/*
* Pull fields that are valid for peripheral drivers to set
* into the dst CCB along with the CCB "payload".
*/
dst_ccb->ccb_h.retry_count = src_ccb->ccb_h.retry_count;
dst_ccb->ccb_h.func_code = src_ccb->ccb_h.func_code;
dst_ccb->ccb_h.timeout = src_ccb->ccb_h.timeout;
dst_ccb->ccb_h.flags = src_ccb->ccb_h.flags;
bcopy(&(&src_ccb->ccb_h)[1], &(&dst_ccb->ccb_h)[1],
sizeof(union ccb) - sizeof(struct ccb_hdr));
}
void
xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path,
u_int32_t priority, u_int32_t flags)
{
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
ccb_h->pinfo.priority = priority;
ccb_h->path = path;
ccb_h->path_id = path->bus->path_id;
if (path->target)
ccb_h->target_id = path->target->target_id;
else
ccb_h->target_id = CAM_TARGET_WILDCARD;
if (path->device) {
ccb_h->target_lun = path->device->lun_id;
ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
} else {
ccb_h->target_lun = CAM_TARGET_WILDCARD;
}
ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
ccb_h->flags = flags;
ccb_h->xflags = 0;
}
void
xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
{
xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0);
}
/* Path manipulation functions */
cam_status
xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
{
struct cam_path *path;
cam_status status;
path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
if (path == NULL) {
status = CAM_RESRC_UNAVAIL;
return(status);
}
status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
if (status != CAM_REQ_CMP) {
free(path, M_CAMPATH);
path = NULL;
}
*new_path_ptr = path;
return (status);
}
cam_status
xpt_create_path_unlocked(struct cam_path **new_path_ptr,
struct cam_periph *periph, path_id_t path_id,
target_id_t target_id, lun_id_t lun_id)
{
return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
lun_id));
}
cam_status
xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
{
struct cam_eb *bus;
struct cam_et *target;
struct cam_ed *device;
cam_status status;
status = CAM_REQ_CMP; /* Completed without error */
target = NULL; /* Wildcarded */
device = NULL; /* Wildcarded */
/*
* We will potentially modify the EDT, so block interrupts
* that may attempt to create cam paths.
*/
bus = xpt_find_bus(path_id);
if (bus == NULL) {
status = CAM_PATH_INVALID;
} else {
xpt_lock_buses();
mtx_lock(&bus->eb_mtx);
target = xpt_find_target(bus, target_id);
if (target == NULL) {
/* Create one */
struct cam_et *new_target;
new_target = xpt_alloc_target(bus, target_id);
if (new_target == NULL) {
status = CAM_RESRC_UNAVAIL;
} else {
target = new_target;
}
}
xpt_unlock_buses();
if (target != NULL) {
device = xpt_find_device(target, lun_id);
if (device == NULL) {
/* Create one */
struct cam_ed *new_device;
new_device =
(*(bus->xport->ops->alloc_device))(bus,
target,
lun_id);
if (new_device == NULL) {
status = CAM_RESRC_UNAVAIL;
} else {
device = new_device;
}
}
}
mtx_unlock(&bus->eb_mtx);
}
/*
* Only touch the user's data if we are successful.
*/
if (status == CAM_REQ_CMP) {
new_path->periph = perph;
new_path->bus = bus;
new_path->target = target;
new_path->device = device;
CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
} else {
if (device != NULL)
xpt_release_device(device);
if (target != NULL)
xpt_release_target(target);
if (bus != NULL)
xpt_release_bus(bus);
}
return (status);
}
cam_status
xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
{
struct cam_path *new_path;
new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
if (new_path == NULL)
return(CAM_RESRC_UNAVAIL);
*new_path = *path;
if (path->bus != NULL)
xpt_acquire_bus(path->bus);
if (path->target != NULL)
xpt_acquire_target(path->target);
if (path->device != NULL)
xpt_acquire_device(path->device);
*new_path_ptr = new_path;
return (CAM_REQ_CMP);
}
void
xpt_release_path(struct cam_path *path)
{
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
if (path->device != NULL) {
xpt_release_device(path->device);
path->device = NULL;
}
if (path->target != NULL) {
xpt_release_target(path->target);
path->target = NULL;
}
if (path->bus != NULL) {
xpt_release_bus(path->bus);
path->bus = NULL;
}
}
void
xpt_free_path(struct cam_path *path)
{
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
xpt_release_path(path);
free(path, M_CAMPATH);
}
void
xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
{
xpt_lock_buses();
if (bus_ref) {
if (path->bus)
*bus_ref = path->bus->refcount;
else
*bus_ref = 0;
}
if (periph_ref) {
if (path->periph)
*periph_ref = path->periph->refcount;
else
*periph_ref = 0;
}
xpt_unlock_buses();
if (target_ref) {
if (path->target)
*target_ref = path->target->refcount;
else
*target_ref = 0;
}
if (device_ref) {
if (path->device)
*device_ref = path->device->refcount;
else
*device_ref = 0;
}
}
/*
* Return -1 for failure, 0 for exact match, 1 for match with wildcards
* in path1, 2 for match with wildcards in path2.
*/
int
xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
{
int retval = 0;
if (path1->bus != path2->bus) {
if (path1->bus->path_id == CAM_BUS_WILDCARD)
retval = 1;
else if (path2->bus->path_id == CAM_BUS_WILDCARD)
retval = 2;
else
return (-1);
}
if (path1->target != path2->target) {
if (path1->target->target_id == CAM_TARGET_WILDCARD) {
if (retval == 0)
retval = 1;
} else if (path2->target->target_id == CAM_TARGET_WILDCARD)
retval = 2;
else
return (-1);
}
if (path1->device != path2->device) {
if (path1->device->lun_id == CAM_LUN_WILDCARD) {
if (retval == 0)
retval = 1;
} else if (path2->device->lun_id == CAM_LUN_WILDCARD)
retval = 2;
else
return (-1);
}
return (retval);
}
int
xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
{
int retval = 0;
if (path->bus != dev->target->bus) {
if (path->bus->path_id == CAM_BUS_WILDCARD)
retval = 1;
else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
retval = 2;
else
return (-1);
}
if (path->target != dev->target) {
if (path->target->target_id == CAM_TARGET_WILDCARD) {
if (retval == 0)
retval = 1;
} else if (dev->target->target_id == CAM_TARGET_WILDCARD)
retval = 2;
else
return (-1);
}
if (path->device != dev) {
if (path->device->lun_id == CAM_LUN_WILDCARD) {
if (retval == 0)
retval = 1;
} else if (dev->lun_id == CAM_LUN_WILDCARD)
retval = 2;
else
return (-1);
}
return (retval);
}
void
xpt_print_path(struct cam_path *path)
{
struct sbuf sb;
char buffer[XPT_PRINT_LEN];
sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
xpt_path_sbuf(path, &sb);
sbuf_finish(&sb);
printf("%s", sbuf_data(&sb));
sbuf_delete(&sb);
}
void
xpt_print_device(struct cam_ed *device)
{
if (device == NULL)
printf("(nopath): ");
else {
printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
device->sim->unit_number,
device->sim->bus_id,
device->target->target_id,
(uintmax_t)device->lun_id);
}
}
void
xpt_print(struct cam_path *path, const char *fmt, ...)
{
va_list ap;
struct sbuf sb;
char buffer[XPT_PRINT_LEN];
sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
xpt_path_sbuf(path, &sb);
va_start(ap, fmt);
sbuf_vprintf(&sb, fmt, ap);
va_end(ap);
sbuf_finish(&sb);
printf("%s", sbuf_data(&sb));
sbuf_delete(&sb);
}
int
xpt_path_string(struct cam_path *path, char *str, size_t str_len)
{
struct sbuf sb;
int len;
sbuf_new(&sb, str, str_len, 0);
len = xpt_path_sbuf(path, &sb);
sbuf_finish(&sb);
return (len);
}
int
xpt_path_sbuf(struct cam_path *path, struct sbuf *sb)
{
if (path == NULL)
sbuf_printf(sb, "(nopath): ");
else {
if (path->periph != NULL)
sbuf_printf(sb, "(%s%d:", path->periph->periph_name,
path->periph->unit_number);
else
sbuf_printf(sb, "(noperiph:");
if (path->bus != NULL)
sbuf_printf(sb, "%s%d:%d:", path->bus->sim->sim_name,
path->bus->sim->unit_number,
path->bus->sim->bus_id);
else
sbuf_printf(sb, "nobus:");
if (path->target != NULL)
sbuf_printf(sb, "%d:", path->target->target_id);
else
sbuf_printf(sb, "X:");
if (path->device != NULL)
sbuf_printf(sb, "%jx): ",
(uintmax_t)path->device->lun_id);
else
sbuf_printf(sb, "X): ");
}
return(sbuf_len(sb));
}
path_id_t
xpt_path_path_id(struct cam_path *path)
{
return(path->bus->path_id);
}
target_id_t
xpt_path_target_id(struct cam_path *path)
{
if (path->target != NULL)
return (path->target->target_id);
else
return (CAM_TARGET_WILDCARD);
}
lun_id_t
xpt_path_lun_id(struct cam_path *path)
{
if (path->device != NULL)
return (path->device->lun_id);
else
return (CAM_LUN_WILDCARD);
}
struct cam_sim *
xpt_path_sim(struct cam_path *path)
{
return (path->bus->sim);
}
struct cam_periph*
xpt_path_periph(struct cam_path *path)
{
return (path->periph);
}
/*
* Release a CAM control block for the caller. Remit the cost of the structure
* to the device referenced by the path. If the this device had no 'credits'
* and peripheral drivers have registered async callbacks for this notification
* call them now.
*/
void
xpt_release_ccb(union ccb *free_ccb)
{
struct cam_ed *device;
struct cam_periph *periph;
CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
device = free_ccb->ccb_h.path->device;
periph = free_ccb->ccb_h.path->periph;
xpt_free_ccb(free_ccb);
periph->periph_allocated--;
cam_ccbq_release_opening(&device->ccbq);
xpt_run_allocq(periph, 0);
}
/* Functions accessed by SIM drivers */
static struct xpt_xport_ops xport_default_ops = {
.alloc_device = xpt_alloc_device_default,
.action = xpt_action_default,
.async = xpt_dev_async_default,
};
static struct xpt_xport xport_default = {
.xport = XPORT_UNKNOWN,
.name = "unknown",
.ops = &xport_default_ops,
};
CAM_XPT_XPORT(xport_default);
/*
* A sim structure, listing the SIM entry points and instance
* identification info is passed to xpt_bus_register to hook the SIM
* into the CAM framework. xpt_bus_register creates a cam_eb entry
* for this new bus and places it in the array of buses and assigns
* it a path_id. The path_id may be influenced by "hard wiring"
* information specified by the user. Once interrupt services are
* available, the bus will be probed.
*/
int32_t
xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
{
struct cam_eb *new_bus;
struct cam_eb *old_bus;
struct ccb_pathinq cpi;
struct cam_path *path;
cam_status status;
sim->bus_id = bus;
new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
M_CAMXPT, M_NOWAIT|M_ZERO);
if (new_bus == NULL) {
/* Couldn't satisfy request */
return (CAM_RESRC_UNAVAIL);
}
mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
TAILQ_INIT(&new_bus->et_entries);
cam_sim_hold(sim);
new_bus->sim = sim;
timevalclear(&new_bus->last_reset);
new_bus->flags = 0;
new_bus->refcount = 1; /* Held until a bus_deregister event */
new_bus->generation = 0;
xpt_lock_buses();
sim->path_id = new_bus->path_id =
xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
while (old_bus != NULL
&& old_bus->path_id < new_bus->path_id)
old_bus = TAILQ_NEXT(old_bus, links);
if (old_bus != NULL)
TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
else
TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
xsoftc.bus_generation++;
xpt_unlock_buses();
/*
* Set a default transport so that a PATH_INQ can be issued to
* the SIM. This will then allow for probing and attaching of
* a more appropriate transport.
*/
new_bus->xport = &xport_default;
status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status != CAM_REQ_CMP) {
xpt_release_bus(new_bus);
return (CAM_RESRC_UNAVAIL);
}
xpt_path_inq(&cpi, path);
if (cpi.ccb_h.status == CAM_REQ_CMP) {
struct xpt_xport **xpt;
SET_FOREACH(xpt, cam_xpt_xport_set) {
if ((*xpt)->xport == cpi.transport) {
new_bus->xport = *xpt;
break;
}
}
if (new_bus->xport == NULL) {
xpt_print(path,
"No transport found for %d\n", cpi.transport);
xpt_release_bus(new_bus);
free(path, M_CAMXPT);
return (CAM_RESRC_UNAVAIL);
}
}
/* Notify interested parties */
if (sim->path_id != CAM_XPT_PATH_ID) {
xpt_async(AC_PATH_REGISTERED, path, &cpi);
if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
union ccb *scan_ccb;
/* Initiate bus rescan. */
scan_ccb = xpt_alloc_ccb_nowait();
if (scan_ccb != NULL) {
scan_ccb->ccb_h.path = path;
scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
scan_ccb->crcn.flags = 0;
xpt_rescan(scan_ccb);
} else {
xpt_print(path,
"Can't allocate CCB to scan bus\n");
xpt_free_path(path);
}
} else
xpt_free_path(path);
} else
xpt_free_path(path);
return (CAM_SUCCESS);
}
int32_t
xpt_bus_deregister(path_id_t pathid)
{
struct cam_path bus_path;
cam_status status;
status = xpt_compile_path(&bus_path, NULL, pathid,
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status != CAM_REQ_CMP)
return (status);
xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
/* Release the reference count held while registered. */
xpt_release_bus(bus_path.bus);
xpt_release_path(&bus_path);
return (CAM_REQ_CMP);
}
static path_id_t
xptnextfreepathid(void)
{
struct cam_eb *bus;
path_id_t pathid;
const char *strval;
mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
pathid = 0;
bus = TAILQ_FIRST(&xsoftc.xpt_busses);
retry:
/* Find an unoccupied pathid */
while (bus != NULL && bus->path_id <= pathid) {
if (bus->path_id == pathid)
pathid++;
bus = TAILQ_NEXT(bus, links);
}
/*
* Ensure that this pathid is not reserved for
* a bus that may be registered in the future.
*/
if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
++pathid;
/* Start the search over */
goto retry;
}
return (pathid);
}
static path_id_t
xptpathid(const char *sim_name, int sim_unit, int sim_bus)
{
path_id_t pathid;
int i, dunit, val;
char buf[32];
const char *dname;
pathid = CAM_XPT_PATH_ID;
snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
return (pathid);
i = 0;
while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
if (strcmp(dname, "scbus")) {
/* Avoid a bit of foot shooting. */
continue;
}
if (dunit < 0) /* unwired?! */
continue;
if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
if (sim_bus == val) {
pathid = dunit;
break;
}
} else if (sim_bus == 0) {
/* Unspecified matches bus 0 */
pathid = dunit;
break;
} else {
printf("Ambiguous scbus configuration for %s%d "
"bus %d, cannot wire down. The kernel "
"config entry for scbus%d should "
"specify a controller bus.\n"
"Scbus will be assigned dynamically.\n",
sim_name, sim_unit, sim_bus, dunit);
break;
}
}
if (pathid == CAM_XPT_PATH_ID)
pathid = xptnextfreepathid();
return (pathid);
}
static const char *
xpt_async_string(u_int32_t async_code)
{
switch (async_code) {
case AC_BUS_RESET: return ("AC_BUS_RESET");
case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
case AC_SCSI_AEN: return ("AC_SCSI_AEN");
case AC_SENT_BDR: return ("AC_SENT_BDR");
case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
case AC_CONTRACT: return ("AC_CONTRACT");
case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
}
return ("AC_UNKNOWN");
}
static int
xpt_async_size(u_int32_t async_code)
{
switch (async_code) {
case AC_BUS_RESET: return (0);
case AC_UNSOL_RESEL: return (0);
case AC_SCSI_AEN: return (0);
case AC_SENT_BDR: return (0);
case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
case AC_PATH_DEREGISTERED: return (0);
case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
case AC_LOST_DEVICE: return (0);
case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
case AC_INQ_CHANGED: return (0);
case AC_GETDEV_CHANGED: return (0);
case AC_CONTRACT: return (sizeof(struct ac_contract));
case AC_ADVINFO_CHANGED: return (-1);
case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
}
return (0);
}
static int
xpt_async_process_dev(struct cam_ed *device, void *arg)
{
union ccb *ccb = arg;
struct cam_path *path = ccb->ccb_h.path;
void *async_arg = ccb->casync.async_arg_ptr;
u_int32_t async_code = ccb->casync.async_code;
int relock;
if (path->device != device
&& path->device->lun_id != CAM_LUN_WILDCARD
&& device->lun_id != CAM_LUN_WILDCARD)
return (1);
/*
* The async callback could free the device.
* If it is a broadcast async, it doesn't hold
* device reference, so take our own reference.
*/
xpt_acquire_device(device);
/*
* If async for specific device is to be delivered to
* the wildcard client, take the specific device lock.
* XXX: We may need a way for client to specify it.
*/
if ((device->lun_id == CAM_LUN_WILDCARD &&
path->device->lun_id != CAM_LUN_WILDCARD) ||
(device->target->target_id == CAM_TARGET_WILDCARD &&
path->target->target_id != CAM_TARGET_WILDCARD) ||
(device->target->bus->path_id == CAM_BUS_WILDCARD &&
path->target->bus->path_id != CAM_BUS_WILDCARD)) {
mtx_unlock(&device->device_mtx);
xpt_path_lock(path);
relock = 1;
} else
relock = 0;
(*(device->target->bus->xport->ops->async))(async_code,
device->target->bus, device->target, device, async_arg);
xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
if (relock) {
xpt_path_unlock(path);
mtx_lock(&device->device_mtx);
}
xpt_release_device(device);
return (1);
}
static int
xpt_async_process_tgt(struct cam_et *target, void *arg)
{
union ccb *ccb = arg;
struct cam_path *path = ccb->ccb_h.path;
if (path->target != target
&& path->target->target_id != CAM_TARGET_WILDCARD
&& target->target_id != CAM_TARGET_WILDCARD)
return (1);
if (ccb->casync.async_code == AC_SENT_BDR) {
/* Update our notion of when the last reset occurred */
microtime(&target->last_reset);
}
return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
}
static void
xpt_async_process(struct cam_periph *periph, union ccb *ccb)
{
struct cam_eb *bus;
struct cam_path *path;
void *async_arg;
u_int32_t async_code;
path = ccb->ccb_h.path;
async_code = ccb->casync.async_code;
async_arg = ccb->casync.async_arg_ptr;
CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
("xpt_async(%s)\n", xpt_async_string(async_code)));
bus = path->bus;
if (async_code == AC_BUS_RESET) {
/* Update our notion of when the last reset occurred */
microtime(&bus->last_reset);
}
xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
/*
* If this wasn't a fully wildcarded async, tell all
* clients that want all async events.
*/
if (bus != xpt_periph->path->bus) {
xpt_path_lock(xpt_periph->path);
xpt_async_process_dev(xpt_periph->path->device, ccb);
xpt_path_unlock(xpt_periph->path);
}
if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
xpt_release_devq(path, 1, TRUE);
else
xpt_release_simq(path->bus->sim, TRUE);
if (ccb->casync.async_arg_size > 0)
free(async_arg, M_CAMXPT);
xpt_free_path(path);
xpt_free_ccb(ccb);
}
static void
xpt_async_bcast(struct async_list *async_head,
u_int32_t async_code,
struct cam_path *path, void *async_arg)
{
struct async_node *cur_entry;
struct mtx *mtx;
cur_entry = SLIST_FIRST(async_head);
while (cur_entry != NULL) {
struct async_node *next_entry;
/*
* Grab the next list entry before we call the current
* entry's callback. This is because the callback function
* can delete its async callback entry.
*/
next_entry = SLIST_NEXT(cur_entry, links);
if ((cur_entry->event_enable & async_code) != 0) {
mtx = cur_entry->event_lock ?
path->device->sim->mtx : NULL;
if (mtx)
mtx_lock(mtx);
cur_entry->callback(cur_entry->callback_arg,
async_code, path,
async_arg);
if (mtx)
mtx_unlock(mtx);
}
cur_entry = next_entry;
}
}
void
xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
{
union ccb *ccb;
int size;
ccb = xpt_alloc_ccb_nowait();
if (ccb == NULL) {
xpt_print(path, "Can't allocate CCB to send %s\n",
xpt_async_string(async_code));
return;
}
if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
xpt_print(path, "Can't allocate path to send %s\n",
xpt_async_string(async_code));
xpt_free_ccb(ccb);
return;
}
ccb->ccb_h.path->periph = NULL;
ccb->ccb_h.func_code = XPT_ASYNC;
ccb->ccb_h.cbfcnp = xpt_async_process;
ccb->ccb_h.flags |= CAM_UNLOCKED;
ccb->casync.async_code = async_code;
ccb->casync.async_arg_size = 0;
size = xpt_async_size(async_code);
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
("xpt_async: func %#x %s aync_code %d %s\n",
ccb->ccb_h.func_code,
xpt_action_name(ccb->ccb_h.func_code),
async_code,
xpt_async_string(async_code)));
if (size > 0 && async_arg != NULL) {
ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
if (ccb->casync.async_arg_ptr == NULL) {
xpt_print(path, "Can't allocate argument to send %s\n",
xpt_async_string(async_code));
xpt_free_path(ccb->ccb_h.path);
xpt_free_ccb(ccb);
return;
}
memcpy(ccb->casync.async_arg_ptr, async_arg, size);
ccb->casync.async_arg_size = size;
} else if (size < 0) {
ccb->casync.async_arg_ptr = async_arg;
ccb->casync.async_arg_size = size;
}
if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
xpt_freeze_devq(path, 1);
else
xpt_freeze_simq(path->bus->sim, 1);
xpt_action(ccb);
}
static void
xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
struct cam_et *target, struct cam_ed *device,
void *async_arg)
{
/*
* We only need to handle events for real devices.
*/
if (target->target_id == CAM_TARGET_WILDCARD
|| device->lun_id == CAM_LUN_WILDCARD)
return;
printf("%s called\n", __func__);
}
static uint32_t
xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
{
struct cam_devq *devq;
uint32_t freeze;
devq = dev->sim->devq;
mtx_assert(&devq->send_mtx, MA_OWNED);
CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
("xpt_freeze_devq_device(%d) %u->%u\n", count,
dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
freeze = (dev->ccbq.queue.qfrozen_cnt += count);
/* Remove frozen device from sendq. */
if (device_is_queued(dev))
camq_remove(&devq->send_queue, dev->devq_entry.index);
return (freeze);
}
u_int32_t
xpt_freeze_devq(struct cam_path *path, u_int count)
{
struct cam_ed *dev = path->device;
struct cam_devq *devq;
uint32_t freeze;
devq = dev->sim->devq;
mtx_lock(&devq->send_mtx);
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
freeze = xpt_freeze_devq_device(dev, count);
mtx_unlock(&devq->send_mtx);
return (freeze);
}
u_int32_t
xpt_freeze_simq(struct cam_sim *sim, u_int count)
{
struct cam_devq *devq;
uint32_t freeze;
devq = sim->devq;
mtx_lock(&devq->send_mtx);
freeze = (devq->send_queue.qfrozen_cnt += count);
mtx_unlock(&devq->send_mtx);
return (freeze);
}
static void
xpt_release_devq_timeout(void *arg)
{
struct cam_ed *dev;
struct cam_devq *devq;
dev = (struct cam_ed *)arg;
CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
devq = dev->sim->devq;
mtx_assert(&devq->send_mtx, MA_OWNED);
if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
xpt_run_devq(devq);
}
void
xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
{
struct cam_ed *dev;
struct cam_devq *devq;
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
count, run_queue));
dev = path->device;
devq = dev->sim->devq;
mtx_lock(&devq->send_mtx);
if (xpt_release_devq_device(dev, count, run_queue))
xpt_run_devq(dev->sim->devq);
mtx_unlock(&devq->send_mtx);
}
static int
xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
{
mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
if (count > dev->ccbq.queue.qfrozen_cnt) {
#ifdef INVARIANTS
printf("xpt_release_devq(): requested %u > present %u\n",
count, dev->ccbq.queue.qfrozen_cnt);
#endif
count = dev->ccbq.queue.qfrozen_cnt;
}
dev->ccbq.queue.qfrozen_cnt -= count;
if (dev->ccbq.queue.qfrozen_cnt == 0) {
/*
* No longer need to wait for a successful
* command completion.
*/
dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
/*
* Remove any timeouts that might be scheduled
* to release this queue.
*/
if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
callout_stop(&dev->callout);
dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
}
/*
* Now that we are unfrozen schedule the
* device so any pending transactions are
* run.
*/
xpt_schedule_devq(dev->sim->devq, dev);
} else
run_queue = 0;
return (run_queue);
}
void
xpt_release_simq(struct cam_sim *sim, int run_queue)
{
struct cam_devq *devq;
devq = sim->devq;
mtx_lock(&devq->send_mtx);
if (devq->send_queue.qfrozen_cnt <= 0) {
#ifdef INVARIANTS
printf("xpt_release_simq: requested 1 > present %u\n",
devq->send_queue.qfrozen_cnt);
#endif
} else
devq->send_queue.qfrozen_cnt--;
if (devq->send_queue.qfrozen_cnt == 0) {
/*
* If there is a timeout scheduled to release this
* sim queue, remove it. The queue frozen count is
* already at 0.
*/
if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
callout_stop(&sim->callout);
sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
}
if (run_queue) {
/*
* Now that we are unfrozen run the send queue.
*/
xpt_run_devq(sim->devq);
}
}
mtx_unlock(&devq->send_mtx);
}
void
xpt_done(union ccb *done_ccb)
{
struct cam_doneq *queue;
int run, hash;
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
if (done_ccb->ccb_h.func_code == XPT_SCSI_IO &&
done_ccb->csio.bio != NULL)
biotrack(done_ccb->csio.bio, __func__);
#endif
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
("xpt_done: func= %#x %s status %#x\n",
done_ccb->ccb_h.func_code,
xpt_action_name(done_ccb->ccb_h.func_code),
done_ccb->ccb_h.status));
if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
return;
/* Store the time the ccb was in the sim */
done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
hash = (u_int)(done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
done_ccb->ccb_h.target_lun) % cam_num_doneqs;
queue = &cam_doneqs[hash];
mtx_lock(&queue->cam_doneq_mtx);
run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
mtx_unlock(&queue->cam_doneq_mtx);
if (run)
wakeup(&queue->cam_doneq);
}
void
xpt_done_direct(union ccb *done_ccb)
{
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
("xpt_done_direct: status %#x\n", done_ccb->ccb_h.status));
if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
return;
/* Store the time the ccb was in the sim */
done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
xpt_done_process(&done_ccb->ccb_h);
}
union ccb *
xpt_alloc_ccb(void)
{
union ccb *new_ccb;
new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
return (new_ccb);
}
union ccb *
xpt_alloc_ccb_nowait(void)
{
union ccb *new_ccb;
new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
return (new_ccb);
}
void
xpt_free_ccb(union ccb *free_ccb)
{
free(free_ccb, M_CAMCCB);
}
/* Private XPT functions */
/*
* Get a CAM control block for the caller. Charge the structure to the device
* referenced by the path. If we don't have sufficient resources to allocate
* more ccbs, we return NULL.
*/
static union ccb *
xpt_get_ccb_nowait(struct cam_periph *periph)
{
union ccb *new_ccb;
new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
if (new_ccb == NULL)
return (NULL);
periph->periph_allocated++;
cam_ccbq_take_opening(&periph->path->device->ccbq);
return (new_ccb);
}
static union ccb *
xpt_get_ccb(struct cam_periph *periph)
{
union ccb *new_ccb;
cam_periph_unlock(periph);
new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
cam_periph_lock(periph);
periph->periph_allocated++;
cam_ccbq_take_opening(&periph->path->device->ccbq);
return (new_ccb);
}
union ccb *
cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
{
struct ccb_hdr *ccb_h;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
cam_periph_assert(periph, MA_OWNED);
while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
ccb_h->pinfo.priority != priority) {
if (priority < periph->immediate_priority) {
periph->immediate_priority = priority;
xpt_run_allocq(periph, 0);
} else
cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
"cgticb", 0);
}
SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
return ((union ccb *)ccb_h);
}
static void
xpt_acquire_bus(struct cam_eb *bus)
{
xpt_lock_buses();
bus->refcount++;
xpt_unlock_buses();
}
static void
xpt_release_bus(struct cam_eb *bus)
{
xpt_lock_buses();
KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
if (--bus->refcount > 0) {
xpt_unlock_buses();
return;
}
TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
xsoftc.bus_generation++;
xpt_unlock_buses();
KASSERT(TAILQ_EMPTY(&bus->et_entries),
("destroying bus, but target list is not empty"));
cam_sim_release(bus->sim);
mtx_destroy(&bus->eb_mtx);
free(bus, M_CAMXPT);
}
static struct cam_et *
xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
{
struct cam_et *cur_target, *target;
mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
mtx_assert(&bus->eb_mtx, MA_OWNED);
target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
M_NOWAIT|M_ZERO);
if (target == NULL)
return (NULL);
TAILQ_INIT(&target->ed_entries);
target->bus = bus;
target->target_id = target_id;
target->refcount = 1;
target->generation = 0;
target->luns = NULL;
mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
timevalclear(&target->last_reset);
/*
* Hold a reference to our parent bus so it
* will not go away before we do.
*/
bus->refcount++;
/* Insertion sort into our bus's target list */
cur_target = TAILQ_FIRST(&bus->et_entries);
while (cur_target != NULL && cur_target->target_id < target_id)
cur_target = TAILQ_NEXT(cur_target, links);
if (cur_target != NULL) {
TAILQ_INSERT_BEFORE(cur_target, target, links);
} else {
TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
}
bus->generation++;
return (target);
}
static void
xpt_acquire_target(struct cam_et *target)
{
struct cam_eb *bus = target->bus;
mtx_lock(&bus->eb_mtx);
target->refcount++;
mtx_unlock(&bus->eb_mtx);
}
static void
xpt_release_target(struct cam_et *target)
{
struct cam_eb *bus = target->bus;
mtx_lock(&bus->eb_mtx);
if (--target->refcount > 0) {
mtx_unlock(&bus->eb_mtx);
return;
}
TAILQ_REMOVE(&bus->et_entries, target, links);
bus->generation++;
mtx_unlock(&bus->eb_mtx);
KASSERT(TAILQ_EMPTY(&target->ed_entries),
("destroying target, but device list is not empty"));
xpt_release_bus(bus);
mtx_destroy(&target->luns_mtx);
if (target->luns)
free(target->luns, M_CAMXPT);
free(target, M_CAMXPT);
}
static struct cam_ed *
xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
lun_id_t lun_id)
{
struct cam_ed *device;
device = xpt_alloc_device(bus, target, lun_id);
if (device == NULL)
return (NULL);
device->mintags = 1;
device->maxtags = 1;
return (device);
}
static void
xpt_destroy_device(void *context, int pending)
{
struct cam_ed *device = context;
mtx_lock(&device->device_mtx);
mtx_destroy(&device->device_mtx);
free(device, M_CAMDEV);
}
struct cam_ed *
xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
{
struct cam_ed *cur_device, *device;
struct cam_devq *devq;
cam_status status;
mtx_assert(&bus->eb_mtx, MA_OWNED);
/* Make space for us in the device queue on our bus */
devq = bus->sim->devq;
mtx_lock(&devq->send_mtx);
status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
mtx_unlock(&devq->send_mtx);
if (status != CAM_REQ_CMP)
return (NULL);
device = (struct cam_ed *)malloc(sizeof(*device),
M_CAMDEV, M_NOWAIT|M_ZERO);
if (device == NULL)
return (NULL);
cam_init_pinfo(&device->devq_entry);
device->target = target;
device->lun_id = lun_id;
device->sim = bus->sim;
if (cam_ccbq_init(&device->ccbq,
bus->sim->max_dev_openings) != 0) {
free(device, M_CAMDEV);
return (NULL);
}
SLIST_INIT(&device->asyncs);
SLIST_INIT(&device->periphs);
device->generation = 0;
device->flags = CAM_DEV_UNCONFIGURED;
device->tag_delay_count = 0;
device->tag_saved_openings = 0;
device->refcount = 1;
mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
callout_init_mtx(&device->callout, &devq->send_mtx, 0);
TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
/*
* Hold a reference to our parent bus so it
* will not go away before we do.
*/
target->refcount++;
cur_device = TAILQ_FIRST(&target->ed_entries);
while (cur_device != NULL && cur_device->lun_id < lun_id)
cur_device = TAILQ_NEXT(cur_device, links);
if (cur_device != NULL)
TAILQ_INSERT_BEFORE(cur_device, device, links);
else
TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
target->generation++;
return (device);
}
void
xpt_acquire_device(struct cam_ed *device)
{
struct cam_eb *bus = device->target->bus;
mtx_lock(&bus->eb_mtx);
device->refcount++;
mtx_unlock(&bus->eb_mtx);
}
void
xpt_release_device(struct cam_ed *device)
{
struct cam_eb *bus = device->target->bus;
struct cam_devq *devq;
mtx_lock(&bus->eb_mtx);
if (--device->refcount > 0) {
mtx_unlock(&bus->eb_mtx);
return;
}
TAILQ_REMOVE(&device->target->ed_entries, device,links);
device->target->generation++;
mtx_unlock(&bus->eb_mtx);
/* Release our slot in the devq */
devq = bus->sim->devq;
mtx_lock(&devq->send_mtx);
cam_devq_resize(devq, devq->send_queue.array_size - 1);
KASSERT(SLIST_EMPTY(&device->periphs),
("destroying device, but periphs list is not empty"));
KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
("destroying device while still queued for ccbs"));
/* The send_mtx must be held when accessing the callout */
if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
callout_stop(&device->callout);
mtx_unlock(&devq->send_mtx);
xpt_release_target(device->target);
cam_ccbq_fini(&device->ccbq);
/*
* Free allocated memory. free(9) does nothing if the
* supplied pointer is NULL, so it is safe to call without
* checking.
*/
free(device->supported_vpds, M_CAMXPT);
free(device->device_id, M_CAMXPT);
free(device->ext_inq, M_CAMXPT);
free(device->physpath, M_CAMXPT);
free(device->rcap_buf, M_CAMXPT);
free(device->serial_num, M_CAMXPT);
free(device->nvme_data, M_CAMXPT);
free(device->nvme_cdata, M_CAMXPT);
taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
}
u_int32_t
xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
{
int result;
struct cam_ed *dev;
dev = path->device;
mtx_lock(&dev->sim->devq->send_mtx);
result = cam_ccbq_resize(&dev->ccbq, newopenings);
mtx_unlock(&dev->sim->devq->send_mtx);
if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
|| (dev->inq_flags & SID_CmdQue) != 0)
dev->tag_saved_openings = newopenings;
return (result);
}
static struct cam_eb *
xpt_find_bus(path_id_t path_id)
{
struct cam_eb *bus;
xpt_lock_buses();
for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
bus != NULL;
bus = TAILQ_NEXT(bus, links)) {
if (bus->path_id == path_id) {
bus->refcount++;
break;
}
}
xpt_unlock_buses();
return (bus);
}
static struct cam_et *
xpt_find_target(struct cam_eb *bus, target_id_t target_id)
{
struct cam_et *target;
mtx_assert(&bus->eb_mtx, MA_OWNED);
for (target = TAILQ_FIRST(&bus->et_entries);
target != NULL;
target = TAILQ_NEXT(target, links)) {
if (target->target_id == target_id) {
target->refcount++;
break;
}
}
return (target);
}
static struct cam_ed *
xpt_find_device(struct cam_et *target, lun_id_t lun_id)
{
struct cam_ed *device;
mtx_assert(&target->bus->eb_mtx, MA_OWNED);
for (device = TAILQ_FIRST(&target->ed_entries);
device != NULL;
device = TAILQ_NEXT(device, links)) {
if (device->lun_id == lun_id) {
device->refcount++;
break;
}
}
return (device);
}
void
xpt_start_tags(struct cam_path *path)
{
struct ccb_relsim crs;
struct cam_ed *device;
struct cam_sim *sim;
int newopenings;
device = path->device;
sim = path->bus->sim;
device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
xpt_freeze_devq(path, /*count*/1);
device->inq_flags |= SID_CmdQue;
if (device->tag_saved_openings != 0)
newopenings = device->tag_saved_openings;
else
newopenings = min(device->maxtags,
sim->max_tagged_dev_openings);
xpt_dev_ccbq_resize(path, newopenings);
xpt_async(AC_GETDEV_CHANGED, path, NULL);
xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
crs.ccb_h.func_code = XPT_REL_SIMQ;
crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
crs.openings
= crs.release_timeout
= crs.qfrozen_cnt
= 0;
xpt_action((union ccb *)&crs);
}
void
xpt_stop_tags(struct cam_path *path)
{
struct ccb_relsim crs;
struct cam_ed *device;
struct cam_sim *sim;
device = path->device;
sim = path->bus->sim;
device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
device->tag_delay_count = 0;
xpt_freeze_devq(path, /*count*/1);
device->inq_flags &= ~SID_CmdQue;
xpt_dev_ccbq_resize(path, sim->max_dev_openings);
xpt_async(AC_GETDEV_CHANGED, path, NULL);
xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
crs.ccb_h.func_code = XPT_REL_SIMQ;
crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
crs.openings
= crs.release_timeout
= crs.qfrozen_cnt
= 0;
xpt_action((union ccb *)&crs);
}
/*
* Assume all possible buses are detected by this time, so allow boot
* as soon as they all are scanned.
*/
static void
xpt_boot_delay(void *arg)
{
xpt_release_boot();
}
/*
* Now that all config hooks have completed, start boot_delay timer,
* waiting for possibly still undetected buses (USB) to appear.
*/
static void
xpt_ch_done(void *arg)
{
callout_init(&xsoftc.boot_callout, 1);
callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0,
xpt_boot_delay, NULL, 0);
}
SYSINIT(xpt_hw_delay, SI_SUB_INT_CONFIG_HOOKS, SI_ORDER_ANY, xpt_ch_done, NULL);
/*
* Now that interrupts are enabled, go find our devices
*/
static void
xpt_config(void *arg)
{
if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
printf("xpt_config: failed to create taskqueue thread.\n");
/* Setup debugging path */
if (cam_dflags != CAM_DEBUG_NONE) {
if (xpt_create_path(&cam_dpath, NULL,
CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
CAM_DEBUG_LUN) != CAM_REQ_CMP) {
printf("xpt_config: xpt_create_path() failed for debug"
" target %d:%d:%d, debugging disabled\n",
CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
cam_dflags = CAM_DEBUG_NONE;
}
} else
cam_dpath = NULL;
periphdriver_init(1);
xpt_hold_boot();
/* Fire up rescan thread. */
if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
"cam", "scanner")) {
printf("xpt_config: failed to create rescan thread.\n");
}
}
void
xpt_hold_boot_locked(void)
{
if (xsoftc.buses_to_config++ == 0)
root_mount_hold_token("CAM", &xsoftc.xpt_rootmount);
}
void
xpt_hold_boot(void)
{
xpt_lock_buses();
xpt_hold_boot_locked();
xpt_unlock_buses();
}
void
xpt_release_boot(void)
{
xpt_lock_buses();
if (--xsoftc.buses_to_config == 0) {
if (xsoftc.buses_config_done == 0) {
xsoftc.buses_config_done = 1;
xsoftc.buses_to_config++;
TASK_INIT(&xsoftc.boot_task, 0, xpt_finishconfig_task,
NULL);
taskqueue_enqueue(taskqueue_thread, &xsoftc.boot_task);
} else
root_mount_rel(&xsoftc.xpt_rootmount);
}
xpt_unlock_buses();
}
/*
* If the given device only has one peripheral attached to it, and if that
* peripheral is the passthrough driver, announce it. This insures that the
* user sees some sort of announcement for every peripheral in their system.
*/
static int
xptpassannouncefunc(struct cam_ed *device, void *arg)
{
struct cam_periph *periph;
int i;
for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
periph = SLIST_NEXT(periph, periph_links), i++);
periph = SLIST_FIRST(&device->periphs);
if ((i == 1)
&& (strncmp(periph->periph_name, "pass", 4) == 0))
xpt_announce_periph(periph, NULL);
return(1);
}
static void
xpt_finishconfig_task(void *context, int pending)
{
periphdriver_init(2);
/*
* Check for devices with no "standard" peripheral driver
* attached. For any devices like that, announce the
* passthrough driver so the user will see something.
*/
if (!bootverbose)
xpt_for_all_devices(xptpassannouncefunc, NULL);
xpt_release_boot();
}
cam_status
xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
struct cam_path *path)
{
struct ccb_setasync csa;
cam_status status;
int xptpath = 0;
if (path == NULL) {
status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status != CAM_REQ_CMP)
return (status);
xpt_path_lock(path);
xptpath = 1;
}
xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = event;
csa.callback = cbfunc;
csa.callback_arg = cbarg;
xpt_action((union ccb *)&csa);
status = csa.ccb_h.status;
CAM_DEBUG(csa.ccb_h.path, CAM_DEBUG_TRACE,
("xpt_register_async: func %p\n", cbfunc));
if (xptpath) {
xpt_path_unlock(path);
xpt_free_path(path);
}
if ((status == CAM_REQ_CMP) &&
(csa.event_enable & AC_FOUND_DEVICE)) {
/*
* Get this peripheral up to date with all
* the currently existing devices.
*/
xpt_for_all_devices(xptsetasyncfunc, &csa);
}
if ((status == CAM_REQ_CMP) &&
(csa.event_enable & AC_PATH_REGISTERED)) {
/*
* Get this peripheral up to date with all
* the currently existing buses.
*/
xpt_for_all_busses(xptsetasyncbusfunc, &csa);
}
return (status);
}
static void
xptaction(struct cam_sim *sim, union ccb *work_ccb)
{
CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
switch (work_ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi;
cpi = &work_ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = 0;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 0;
cpi->max_lun = 0;
cpi->initiator_id = 0;
strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strlcpy(cpi->hba_vid, "", HBA_IDLEN);
strlcpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
cpi->unit_number = sim->unit_number;
cpi->bus_id = sim->bus_id;
cpi->base_transfer_speed = 0;
cpi->protocol = PROTO_UNSPECIFIED;
cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
cpi->transport = XPORT_UNSPECIFIED;
cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
default:
work_ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(work_ccb);
}
/*
* The xpt as a "controller" has no interrupt sources, so polling
* is a no-op.
*/
static void
xptpoll(struct cam_sim *sim)
{
}
void
xpt_lock_buses(void)
{
mtx_lock(&xsoftc.xpt_topo_lock);
}
void
xpt_unlock_buses(void)
{
mtx_unlock(&xsoftc.xpt_topo_lock);
}
struct mtx *
xpt_path_mtx(struct cam_path *path)
{
return (&path->device->device_mtx);
}
static void
xpt_done_process(struct ccb_hdr *ccb_h)
{
struct cam_sim *sim = NULL;
struct cam_devq *devq = NULL;
struct mtx *mtx = NULL;
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
struct ccb_scsiio *csio;
if (ccb_h->func_code == XPT_SCSI_IO) {
csio = &((union ccb *)ccb_h)->csio;
if (csio->bio != NULL)
biotrack(csio->bio, __func__);
}
#endif
if (ccb_h->flags & CAM_HIGH_POWER) {
struct highpowerlist *hphead;
struct cam_ed *device;
mtx_lock(&xsoftc.xpt_highpower_lock);
hphead = &xsoftc.highpowerq;
device = STAILQ_FIRST(hphead);
/*
* Increment the count since this command is done.
*/
xsoftc.num_highpower++;
/*
* Any high powered commands queued up?
*/
if (device != NULL) {
STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
mtx_unlock(&xsoftc.xpt_highpower_lock);
mtx_lock(&device->sim->devq->send_mtx);
xpt_release_devq_device(device,
/*count*/1, /*runqueue*/TRUE);
mtx_unlock(&device->sim->devq->send_mtx);
} else
mtx_unlock(&xsoftc.xpt_highpower_lock);
}
/*
* Insulate against a race where the periph is destroyed but CCBs are
* still not all processed. This shouldn't happen, but allows us better
* bug diagnostic when it does.
*/
if (ccb_h->path->bus)
sim = ccb_h->path->bus->sim;
if (ccb_h->status & CAM_RELEASE_SIMQ) {
KASSERT(sim, ("sim missing for CAM_RELEASE_SIMQ request"));
xpt_release_simq(sim, /*run_queue*/FALSE);
ccb_h->status &= ~CAM_RELEASE_SIMQ;
}
if ((ccb_h->flags & CAM_DEV_QFRZDIS)
&& (ccb_h->status & CAM_DEV_QFRZN)) {
xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
ccb_h->status &= ~CAM_DEV_QFRZN;
}
if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
struct cam_ed *dev = ccb_h->path->device;
if (sim)
devq = sim->devq;
KASSERT(devq, ("Periph disappeared with CCB %p %s request pending.",
ccb_h, xpt_action_name(ccb_h->func_code)));
mtx_lock(&devq->send_mtx);
devq->send_active--;
devq->send_openings++;
cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
&& (dev->ccbq.dev_active == 0))) {
dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
xpt_release_devq_device(dev, /*count*/1,
/*run_queue*/FALSE);
}
if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
&& (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
xpt_release_devq_device(dev, /*count*/1,
/*run_queue*/FALSE);
}
if (!device_is_queued(dev))
(void)xpt_schedule_devq(devq, dev);
xpt_run_devq(devq);
mtx_unlock(&devq->send_mtx);
if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
mtx = xpt_path_mtx(ccb_h->path);
mtx_lock(mtx);
if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
&& (--dev->tag_delay_count == 0))
xpt_start_tags(ccb_h->path);
}
}
if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
if (mtx == NULL) {
mtx = xpt_path_mtx(ccb_h->path);
mtx_lock(mtx);
}
} else {
if (mtx != NULL) {
mtx_unlock(mtx);
mtx = NULL;
}
}
/* Call the peripheral driver's callback */
ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
(*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
if (mtx != NULL)
mtx_unlock(mtx);
}
void
xpt_done_td(void *arg)
{
struct cam_doneq *queue = arg;
struct ccb_hdr *ccb_h;
STAILQ_HEAD(, ccb_hdr) doneq;
STAILQ_INIT(&doneq);
mtx_lock(&queue->cam_doneq_mtx);
while (1) {
while (STAILQ_EMPTY(&queue->cam_doneq)) {
queue->cam_doneq_sleep = 1;
msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
PRIBIO, "-", 0);
queue->cam_doneq_sleep = 0;
}
STAILQ_CONCAT(&doneq, &queue->cam_doneq);
mtx_unlock(&queue->cam_doneq_mtx);
THREAD_NO_SLEEPING();
while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
xpt_done_process(ccb_h);
}
THREAD_SLEEPING_OK();
mtx_lock(&queue->cam_doneq_mtx);
}
}
static void
camisr_runqueue(void)
{
struct ccb_hdr *ccb_h;
struct cam_doneq *queue;
int i;
/* Process global queues. */
for (i = 0; i < cam_num_doneqs; i++) {
queue = &cam_doneqs[i];
mtx_lock(&queue->cam_doneq_mtx);
while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
mtx_unlock(&queue->cam_doneq_mtx);
xpt_done_process(ccb_h);
mtx_lock(&queue->cam_doneq_mtx);
}
mtx_unlock(&queue->cam_doneq_mtx);
}
}
struct kv
{
uint32_t v;
const char *name;
};
static struct kv map[] = {
{ XPT_NOOP, "XPT_NOOP" },
{ XPT_SCSI_IO, "XPT_SCSI_IO" },
{ XPT_GDEV_TYPE, "XPT_GDEV_TYPE" },
{ XPT_GDEVLIST, "XPT_GDEVLIST" },
{ XPT_PATH_INQ, "XPT_PATH_INQ" },
{ XPT_REL_SIMQ, "XPT_REL_SIMQ" },
{ XPT_SASYNC_CB, "XPT_SASYNC_CB" },
{ XPT_SDEV_TYPE, "XPT_SDEV_TYPE" },
{ XPT_SCAN_BUS, "XPT_SCAN_BUS" },
{ XPT_DEV_MATCH, "XPT_DEV_MATCH" },
{ XPT_DEBUG, "XPT_DEBUG" },
{ XPT_PATH_STATS, "XPT_PATH_STATS" },
{ XPT_GDEV_STATS, "XPT_GDEV_STATS" },
{ XPT_DEV_ADVINFO, "XPT_DEV_ADVINFO" },
{ XPT_ASYNC, "XPT_ASYNC" },
{ XPT_ABORT, "XPT_ABORT" },
{ XPT_RESET_BUS, "XPT_RESET_BUS" },
{ XPT_RESET_DEV, "XPT_RESET_DEV" },
{ XPT_TERM_IO, "XPT_TERM_IO" },
{ XPT_SCAN_LUN, "XPT_SCAN_LUN" },
{ XPT_GET_TRAN_SETTINGS, "XPT_GET_TRAN_SETTINGS" },
{ XPT_SET_TRAN_SETTINGS, "XPT_SET_TRAN_SETTINGS" },
{ XPT_CALC_GEOMETRY, "XPT_CALC_GEOMETRY" },
{ XPT_ATA_IO, "XPT_ATA_IO" },
{ XPT_GET_SIM_KNOB, "XPT_GET_SIM_KNOB" },
{ XPT_SET_SIM_KNOB, "XPT_SET_SIM_KNOB" },
{ XPT_NVME_IO, "XPT_NVME_IO" },
{ XPT_MMC_IO, "XPT_MMC_IO" },
{ XPT_SMP_IO, "XPT_SMP_IO" },
{ XPT_SCAN_TGT, "XPT_SCAN_TGT" },
{ XPT_NVME_ADMIN, "XPT_NVME_ADMIN" },
{ XPT_ENG_INQ, "XPT_ENG_INQ" },
{ XPT_ENG_EXEC, "XPT_ENG_EXEC" },
{ XPT_EN_LUN, "XPT_EN_LUN" },
{ XPT_TARGET_IO, "XPT_TARGET_IO" },
{ XPT_ACCEPT_TARGET_IO, "XPT_ACCEPT_TARGET_IO" },
{ XPT_CONT_TARGET_IO, "XPT_CONT_TARGET_IO" },
{ XPT_IMMED_NOTIFY, "XPT_IMMED_NOTIFY" },
{ XPT_NOTIFY_ACK, "XPT_NOTIFY_ACK" },
{ XPT_IMMEDIATE_NOTIFY, "XPT_IMMEDIATE_NOTIFY" },
{ XPT_NOTIFY_ACKNOWLEDGE, "XPT_NOTIFY_ACKNOWLEDGE" },
{ 0, 0 }
};
const char *
xpt_action_name(uint32_t action)
{
static char buffer[32]; /* Only for unknown messages -- racy */
struct kv *walker = map;
while (walker->name != NULL) {
if (walker->v == action)
return (walker->name);
walker++;
}
snprintf(buffer, sizeof(buffer), "%#x", action);
return (buffer);
}
Reference in New Issue View Git Blame Copy Permalink