156 lines
5.2 KiB
Plaintext
156 lines
5.2 KiB
Plaintext
.NC "NSAP Addresses & Routing"
|
|
.sh 1 "OSI Address Formats"
|
|
.pp
|
|
ARGO supports an ISO address family, AF_ISO, in addition to the
|
|
DoD Internet address family, AF_INET.
|
|
Addresses in the family AF_ISO
|
|
take the form described by ISO 8348/DAD2, which is an addendum to the
|
|
OSI network service standard that describes network layer addressing.
|
|
.sh 2 "ISO 8348/DAD2 Tutorial"
|
|
.pp
|
|
.\" FIGURE
|
|
.\".so figs/osi_addr.nr
|
|
.so ../wisc/figs/addrfmt.nr
|
|
.CF
|
|
shows the
|
|
format of an OSI NSAP-address.
|
|
The address has two major parts: the initial domain part
|
|
(IDP) and the domain specific part (DSP). The IDP is further divided into
|
|
two parts: the authority and format identifier (AFI) and the
|
|
initial domain identifier (IDI). The AFI specifies the format of the
|
|
IDI, the authority responsible for allocating values of the IDI, and
|
|
the syntax of the DSP. The IDI specifies the network addressing domain
|
|
from which DSP values are allocated, and the authority responsible for
|
|
allocating DSP values.
|
|
.sh 2 "Supported Formats"
|
|
.pp
|
|
ARGO supports three types of ISO NSAP-addresses:
|
|
one type with AFI 37(hex) and two types with AFI 47(hex).
|
|
.sh 3 "AFI 37"
|
|
.pp
|
|
This value of the AFI defines the IDI to be an X.121 address or DTE
|
|
address.
|
|
The DTE address is encoded in binary coded decimal.
|
|
The DSP syntax is binary.
|
|
This form is intended to be used when communicating
|
|
across a public data network (PDN).
|
|
The ARGO software and documentation
|
|
refer to this type of NSAP-address as a
|
|
\*(lqtype 37.\*(rq
|
|
address.
|
|
.sh 3 "AFI 47"
|
|
.pp
|
|
The value of 47 for the AFI defines the IDI to be a 4 digit International
|
|
Code Designator (ICD) allocated according to ISO 6523.
|
|
ARGO support two
|
|
ICD values.
|
|
.sh 4 "ICD 0004"
|
|
.pp
|
|
The ICD value of 0004 is assigned to OSINET,
|
|
an experimental OSI network overseen by
|
|
National Institute of Science and Technology.\**
|
|
.(f
|
|
\** formerly the National Bureau of Standards
|
|
.)f
|
|
When this style of NSAP-address
|
|
is used,
|
|
the DSP is divided into four parts: an organization identifier (2 bytes),
|
|
a subnet identifier (2 bytes),
|
|
an SNPA-part (4-8 bytes), and
|
|
an NSAP selector (1 byte).
|
|
The use of these fields is defined by the OSINET steering committee.
|
|
This type of address is known as an
|
|
\*(lqOSINET\*(rq
|
|
address.
|
|
.sh 4 "ICD 0006"
|
|
.pp
|
|
The ICD value of 0006 is assigned to the Department of Defense (DoD).
|
|
In ARGO, NSAP-addresses with an ICD value of 0006
|
|
are of the format defined in RFC 986, a proposal for embedding DARPA Internet
|
|
addresses within an OSI NSAP-address.
|
|
In this case, the DSP takes the form:
|
|
version (1 byte), DARPA Internet Address (4 bytes), upper layer protocol
|
|
identifier (1 byte).
|
|
This is called an
|
|
\*(lqrfc986\*(rq
|
|
address.
|
|
.sh 1 "Internal Representation"
|
|
.pp
|
|
Internally, an NSAP address takes the form
|
|
.(b
|
|
\fC
|
|
.TS
|
|
tab(+);
|
|
l s s s s.
|
|
struct iso_addr {
|
|
.T&
|
|
l l l l l.
|
|
+u_char+isoa_afi;+/* authority &
|
|
+++format id */
|
|
+union+{+
|
|
++struct addr_37+addr_37;+/* x.121 */
|
|
++struct addr_osinet+addr_osinet;+/* OSINET */
|
|
++struct addr_rfc986+addr_rfc986;+/* Internet*/
|
|
+}+isoa_u;
|
|
+u_char+isoa_len;+/* length */
|
|
}
|
|
.TE
|
|
\fR
|
|
.)b
|
|
The field \fIisoa_afi\fR contains the AFI for the address.
|
|
The union
|
|
\fIisoa_u\fR contains the remainder of the address.
|
|
The length of the entire address (the AFI, IDI, and DSP) is
|
|
stored in \fIisoa_len\fR.
|
|
.sh 1 "Network Layer Routing"
|
|
.pp
|
|
Routing at the network layer is performed by the
|
|
routing procedure \fIrtalloc()\fR as described in Chapter 5.
|
|
\fIRtalloc()\fR was designed for used in the DoD Internet
|
|
domain.
|
|
An unfortunate
|
|
effect of this is that routing decisions are based upon either the
|
|
entire NSAP address or the network portion of the address.
|
|
The problem is defining the network portion of an NSAP address.
|
|
The location and extent of the
|
|
network portion of an NSAP address depends on the
|
|
style of NSAP address.
|
|
This decision is made by the function \fIiso_netof()\fR.
|
|
.sh 2 "Network Portion of Type 37 Addresses"
|
|
.pp
|
|
There is no network portion of an X.121 address.
|
|
In ARGO, the network portion of a type 37 address
|
|
is defined to be just the AFI.
|
|
The obvious consequence of this is that all type 37 addresses will
|
|
match all other type 37 addresses
|
|
in a network-portion comparison.
|
|
.sh 2 "Network Portion of OSINET Addresses"
|
|
.pp
|
|
The network portion of an OSINET address is the organization identifier and
|
|
the subnet identifier.
|
|
.sh 2 "Network Portion of RFC986 Addresses"
|
|
.pp
|
|
The network portion of an RFC986 address is the network portion of the
|
|
embedded DARPA Internet address.
|
|
ARGO does not support subnetting, a method of subdividing Internet addresses.
|
|
.sh 1 "NSAP Address / Subnetwork Point of Attachment Mapping"
|
|
.pp
|
|
In order to transmit a packet on a real subnetwork, the destination
|
|
NSAP address
|
|
must be mapped to an SNPA address.
|
|
An SNPA address is the real, "hardware" address
|
|
of a system on a network.
|
|
This address corresponds to the 6 byte Ethernet or Token Ring
|
|
Adapter address,
|
|
or to the DTE address, which may be up to 7 bytes
|
|
long (14 decimal digits).
|
|
.pp
|
|
A table, \fIsnpa_cache\fR is kept in the kernel which contains the
|
|
translation between NSAP-addresses and SNPA-addresses.
|
|
This table is used by \fIiso_snparesolve()\fR whenever a
|
|
datagram must be dispatched.
|
|
The table is maintained by the the ISO ES-IS protocol entity.
|
|
Entries can be added and deleted
|
|
by the user program \fIclnlutil(8)\fR and
|
|
by the CONS entity.
|