freebsd-nq/sys/dev/mpt/mpt_cam.c
Matt Jacob c87e3f833c Some fairly major changes to this driver.
A) Fibre Channel Target Mode support mostly works
(SAS/SPI won't be too far behind). I'd say that
this probably works just about as well as isp(4)
does right now. Still, it and isp(4) and the whole
target mode stack need a bit of tightening.

B) The startup sequence has been changed so that
after all attaches are done, a set of enable functions
are called. The idea here is that the attaches do
whatever needs to be done *prior* to a port being
enabled and the enables do what need to be done for
enabling stuff for a port after it's been enabled.

This means that we also have events handled by their
proper handlers as we start up.

C) Conditional code that means that this driver goes
back all the way to RELENG_4 in terms of support.

D) Quite a lot of little nitty bug fixes- some discovered
by doing RELENG_4 support. We've been living under Giant
*waaaayyyyy* too long and it's made some of us (me) sloppy.

E) Some shutdown hook stuff that makes sure we don't blow
up during a reboot (like by the arrival of a new command
from an initiator).

There's been some testing and LINT checking, but not as
complete as would be liked. Regression testing with Fusion
RAID instances has not been possible. Caveat Emptor.

Sponsored by: LSI-Logic.
2006-03-25 07:08:27 +00:00

4470 lines
120 KiB
C

/*-
* FreeBSD/CAM specific routines for LSI '909 FC adapters.
* FreeBSD Version.
*
* Copyright (c) 2000, 2001 by Greg Ansley
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 2002, 2006 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Support from Chris Ellsworth in order to make SAS adapters work
* is gratefully acknowledged.
*/
/*-
* Copyright (c) 2004, Avid Technology, Inc. and its contributors.
* Copyright (c) 2005, WHEEL Sp. z o.o.
* Copyright (c) 2004, 2005 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <dev/mpt/mpt.h>
#include <dev/mpt/mpt_cam.h>
#include <dev/mpt/mpt_raid.h>
#include "dev/mpt/mpilib/mpi_ioc.h" /* XXX Fix Event Handling!!! */
#include "dev/mpt/mpilib/mpi_init.h"
#include "dev/mpt/mpilib/mpi_targ.h"
#include "dev/mpt/mpilib/mpi_fc.h"
#include <sys/callout.h>
#include <sys/kthread.h>
static void mpt_poll(struct cam_sim *);
static timeout_t mpt_timeout;
static void mpt_action(struct cam_sim *, union ccb *);
static int mpt_setwidth(struct mpt_softc *, int, int);
static int mpt_setsync(struct mpt_softc *, int, int, int);
static void mpt_calc_geometry(struct ccb_calc_geometry *ccg, int extended);
static mpt_reply_handler_t mpt_scsi_reply_handler;
static mpt_reply_handler_t mpt_scsi_tmf_reply_handler;
static mpt_reply_handler_t mpt_fc_els_reply_handler;
static mpt_reply_handler_t mpt_scsi_tgt_reply_handler;
static int mpt_scsi_reply_frame_handler(struct mpt_softc *mpt, request_t *req,
MSG_DEFAULT_REPLY *reply_frame);
static int mpt_bus_reset(struct mpt_softc *, int /*sleep_ok*/);
static int mpt_fc_reset_link(struct mpt_softc *, int);
static int mpt_spawn_recovery_thread(struct mpt_softc *mpt);
static void mpt_terminate_recovery_thread(struct mpt_softc *mpt);
static void mpt_recovery_thread(void *arg);
static int mpt_scsi_send_tmf(struct mpt_softc *, u_int /*type*/,
u_int /*flags*/, u_int /*channel*/,
u_int /*target*/, u_int /*lun*/,
u_int /*abort_ctx*/, int /*sleep_ok*/);
static void mpt_fc_add_els(struct mpt_softc *mpt, request_t *);
static void mpt_post_target_command(struct mpt_softc *, request_t *, int);
static void mpt_add_target_commands(struct mpt_softc *mpt);
static int mpt_enable_lun(struct mpt_softc *, target_id_t, lun_id_t);
static int mpt_disable_lun(struct mpt_softc *, target_id_t, lun_id_t);
static void mpt_target_start_io(struct mpt_softc *, union ccb *);
static cam_status mpt_abort_target_ccb(struct mpt_softc *, union ccb *);
static cam_status mpt_abort_target_cmd(struct mpt_softc *, request_t *);
static void mpt_recover_commands(struct mpt_softc *mpt);
static uint32_t scsi_io_handler_id = MPT_HANDLER_ID_NONE;
static uint32_t scsi_tmf_handler_id = MPT_HANDLER_ID_NONE;
static uint32_t fc_els_handler_id = MPT_HANDLER_ID_NONE;
static mpt_probe_handler_t mpt_cam_probe;
static mpt_attach_handler_t mpt_cam_attach;
static mpt_enable_handler_t mpt_cam_enable;
static mpt_event_handler_t mpt_cam_event;
static mpt_reset_handler_t mpt_cam_ioc_reset;
static mpt_detach_handler_t mpt_cam_detach;
static struct mpt_personality mpt_cam_personality =
{
.name = "mpt_cam",
.probe = mpt_cam_probe,
.attach = mpt_cam_attach,
.enable = mpt_cam_enable,
.event = mpt_cam_event,
.reset = mpt_cam_ioc_reset,
.detach = mpt_cam_detach,
};
DECLARE_MPT_PERSONALITY(mpt_cam, SI_ORDER_SECOND);
int
mpt_cam_probe(struct mpt_softc *mpt)
{
/*
* Only attach to nodes that support the initiator or target
* role or have RAID physical devices that need CAM pass-thru support.
*/
if ((mpt->mpt_proto_flags & MPI_PORTFACTS_PROTOCOL_INITIATOR) != 0
|| (mpt->mpt_proto_flags & MPI_PORTFACTS_PROTOCOL_TARGET) != 0
|| (mpt->ioc_page2 != NULL && mpt->ioc_page2->MaxPhysDisks != 0)) {
return (0);
}
return (ENODEV);
}
int
mpt_cam_attach(struct mpt_softc *mpt)
{
struct cam_devq *devq;
mpt_handler_t handler;
int maxq;
int error;
TAILQ_INIT(&mpt->request_timeout_list);
maxq = (mpt->mpt_global_credits < MPT_MAX_REQUESTS(mpt))?
mpt->mpt_global_credits : MPT_MAX_REQUESTS(mpt);
handler.reply_handler = mpt_scsi_reply_handler;
error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
&scsi_io_handler_id);
if (error != 0) {
goto cleanup;
}
handler.reply_handler = mpt_scsi_tmf_reply_handler;
error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
&scsi_tmf_handler_id);
if (error != 0) {
goto cleanup;
}
/*
* We keep two requests reserved for ELS replies/responses
* if we're fibre channel and target mode.
*/
if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET) != 0) {
request_t *req;
int i;
handler.reply_handler = mpt_fc_els_reply_handler;
error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
&fc_els_handler_id);
if (error != 0) {
goto cleanup;
}
/*
* Feed the chip some ELS buffer resources
*/
for (i = 0; i < MPT_MAX_ELS; i++) {
req = mpt_get_request(mpt, FALSE);
if (req == NULL) {
break;
}
mpt_fc_add_els(mpt, req);
}
if (i == 0) {
mpt_prt(mpt, "Unable to add ELS buffer resources\n");
goto cleanup;
}
maxq -= i;
}
/*
* If we're in target mode, register a reply
* handler for it and add some commands.
*/
if ((mpt->role & MPT_ROLE_TARGET) != 0) {
handler.reply_handler = mpt_scsi_tgt_reply_handler;
error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
&mpt->scsi_tgt_handler_id);
if (error != 0) {
goto cleanup;
}
/*
* Add some target command resources
*/
mpt_add_target_commands(mpt);
}
/*
* We keep one request reserved for timeout TMF requests.
*/
mpt->tmf_req = mpt_get_request(mpt, /*sleep_ok*/FALSE);
if (mpt->tmf_req == NULL) {
mpt_prt(mpt, "Unable to allocate dedicated TMF request!\n");
error = ENOMEM;
goto cleanup;
}
/*
* Mark the request as free even though not on the free list.
* There is only one TMF request allowed to be outstanding at
* a time and the TMF routines perform their own allocation
* tracking using the standard state flags.
*/
mpt->tmf_req->state = REQ_STATE_FREE;
maxq--;
if (mpt_spawn_recovery_thread(mpt) != 0) {
mpt_prt(mpt, "Unable to spawn recovery thread!\n");
error = ENOMEM;
goto cleanup;
}
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(maxq);
if (devq == NULL) {
mpt_prt(mpt, "Unable to allocate CAM SIMQ!\n");
error = ENOMEM;
goto cleanup;
}
/*
* Construct our SIM entry.
*/
mpt->sim = cam_sim_alloc(mpt_action, mpt_poll, "mpt", mpt,
mpt->unit, 1, maxq, devq);
if (mpt->sim == NULL) {
mpt_prt(mpt, "Unable to allocate CAM SIM!\n");
cam_simq_free(devq);
error = ENOMEM;
goto cleanup;
}
/*
* Register exactly the bus.
*/
if (xpt_bus_register(mpt->sim, 0) != CAM_SUCCESS) {
mpt_prt(mpt, "Bus registration Failed!\n");
error = ENOMEM;
goto cleanup;
}
if (xpt_create_path(&mpt->path, NULL, cam_sim_path(mpt->sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
mpt_prt(mpt, "Unable to allocate Path!\n");
error = ENOMEM;
goto cleanup;
}
/*
* Only register a second bus for RAID physical
* devices if the controller supports RAID.
*/
if (mpt->ioc_page2 == NULL || mpt->ioc_page2->MaxPhysDisks == 0) {
return (0);
}
/*
* Create a "bus" to export all hidden disks to CAM.
*/
mpt->phydisk_sim = cam_sim_alloc(mpt_action, mpt_poll, "mpt", mpt,
mpt->unit, 1, maxq, devq);
if (mpt->phydisk_sim == NULL) {
mpt_prt(mpt, "Unable to allocate Physical Disk CAM SIM!\n");
error = ENOMEM;
goto cleanup;
}
/*
* Register exactly the bus.
*/
if (xpt_bus_register(mpt->phydisk_sim, 1) != CAM_SUCCESS) {
mpt_prt(mpt, "Physical Disk Bus registration Failed!\n");
error = ENOMEM;
goto cleanup;
}
if (xpt_create_path(&mpt->phydisk_path, NULL,
cam_sim_path(mpt->phydisk_sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
mpt_prt(mpt, "Unable to allocate Physical Disk Path!\n");
error = ENOMEM;
goto cleanup;
}
return (0);
cleanup:
mpt_cam_detach(mpt);
return (error);
}
/*
* Read FC configuration information
*/
static int
mpt_read_config_info_fc(struct mpt_softc *mpt)
{
char *topology = NULL;
int rv, speed = 0;
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 0,
0, &mpt->mpt_fcport_page0.Header, FALSE, 5000);
if (rv) {
return (-1);
}
mpt_lprt(mpt, MPT_PRT_DEBUG, "FC Port Page 0 Header: %x %x %x %x\n",
mpt->mpt_fcport_page0.Header.PageVersion,
mpt->mpt_fcport_page0.Header.PageLength,
mpt->mpt_fcport_page0.Header.PageNumber,
mpt->mpt_fcport_page0.Header.PageType);
rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_fcport_page0.Header,
sizeof(mpt->mpt_fcport_page0), FALSE, 5000);
if (rv) {
mpt_prt(mpt, "failed to read FC Port Page 0\n");
return (-1);
}
speed = mpt->mpt_fcport_page0.CurrentSpeed;
switch (mpt->mpt_fcport_page0.Flags &
MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK) {
case MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT:
speed = 0;
topology = "<NO LOOP>";
break;
case MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT:
topology = "N-Port";
break;
case MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP:
topology = "NL-Port";
break;
case MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT:
topology = "F-Port";
break;
case MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP:
topology = "FL-Port";
break;
default:
speed = 0;
topology = "?";
break;
}
mpt_lprt(mpt, MPT_PRT_INFO,
"FC Port Page 0: Topology <%s> WWNN 0x%08x%08x WWPN 0x%08x%08x "
"Speed %u-Gbit\n", topology,
mpt->mpt_fcport_page0.WWNN.High,
mpt->mpt_fcport_page0.WWNN.Low,
mpt->mpt_fcport_page0.WWPN.High,
mpt->mpt_fcport_page0.WWPN.Low,
speed);
return (0);
}
/*
* Set FC configuration information.
*/
static int
mpt_set_initial_config_fc(struct mpt_softc *mpt)
{
#if 0
CONFIG_PAGE_FC_PORT_1 fc;
U32 fl;
int r, doit = 0;
r = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 1, 0,
&fc.Header, FALSE, 5000);
if (r) {
return (mpt_fc_reset_link(mpt, 1));
}
r = mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT, 0,
&fc.Header, sizeof (fc), FALSE, 5000);
if (r) {
return (mpt_fc_reset_link(mpt, 1));
}
fl = le32toh(fc.Flags);
if ((fl & MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID) == 0) {
fl |= MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID;
doit = 1;
}
if ((fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT) &&
(mpt->role & MPT_ROLE_INITIATOR) == 0) {
fl &= ~MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT;
doit = 1;
}
if ((fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG) &&
(mpt->role & MPT_ROLE_TARGET) == 0) {
fl &= ~MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG;
doit = 1;
}
if (doit) {
const char *cc;
mpt_lprt(mpt, MPT_PRT_INFO,
"FC Port Page 1: New Flags %x \n", fl);
fc.Flags = htole32(fl);
r = mpt_write_cfg_page(mpt,
MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT, 0, &fc.Header,
sizeof(fc), FALSE, 5000);
if (r != 0) {
cc = "FC PORT PAGE1 UPDATE: FAILED\n";
} else {
cc = "FC PORT PAGE1 UPDATED: SYSTEM NEEDS RESET\n";
}
mpt_prt(mpt, cc);
}
#endif
return (mpt_fc_reset_link(mpt, 1));
}
/*
* Read SAS configuration information. Nothing to do yet.
*/
static int
mpt_read_config_info_sas(struct mpt_softc *mpt)
{
return (0);
}
/*
* Set SAS configuration information. Nothing to do yet.
*/
static int
mpt_set_initial_config_sas(struct mpt_softc *mpt)
{
return (0);
}
/*
* Read SCSI configuration information
*/
static int
mpt_read_config_info_spi(struct mpt_softc *mpt)
{
int rv, i;
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 0,
0, &mpt->mpt_port_page0.Header,
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv)
return (-1);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Port Page 0 Header: %x %x %x %x\n",
mpt->mpt_port_page0.Header.PageVersion,
mpt->mpt_port_page0.Header.PageLength,
mpt->mpt_port_page0.Header.PageNumber,
mpt->mpt_port_page0.Header.PageType);
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 1,
0, &mpt->mpt_port_page1.Header,
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv)
return (-1);
mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 1 Header: %x %x %x %x\n",
mpt->mpt_port_page1.Header.PageVersion,
mpt->mpt_port_page1.Header.PageLength,
mpt->mpt_port_page1.Header.PageNumber,
mpt->mpt_port_page1.Header.PageType);
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 2,
/*PageAddress*/0, &mpt->mpt_port_page2.Header,
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv)
return (-1);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Port Page 2 Header: %x %x %x %x\n",
mpt->mpt_port_page1.Header.PageVersion,
mpt->mpt_port_page1.Header.PageLength,
mpt->mpt_port_page1.Header.PageNumber,
mpt->mpt_port_page1.Header.PageType);
for (i = 0; i < 16; i++) {
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE,
0, i, &mpt->mpt_dev_page0[i].Header,
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv)
return (-1);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Target %d Device Page 0 Header: %x %x %x %x\n",
i, mpt->mpt_dev_page0[i].Header.PageVersion,
mpt->mpt_dev_page0[i].Header.PageLength,
mpt->mpt_dev_page0[i].Header.PageNumber,
mpt->mpt_dev_page0[i].Header.PageType);
rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE,
1, i, &mpt->mpt_dev_page1[i].Header,
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv)
return (-1);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Target %d Device Page 1 Header: %x %x %x %x\n",
i, mpt->mpt_dev_page1[i].Header.PageVersion,
mpt->mpt_dev_page1[i].Header.PageLength,
mpt->mpt_dev_page1[i].Header.PageNumber,
mpt->mpt_dev_page1[i].Header.PageType);
}
/*
* At this point, we don't *have* to fail. As long as we have
* valid config header information, we can (barely) lurch
* along.
*/
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
&mpt->mpt_port_page0.Header,
sizeof(mpt->mpt_port_page0),
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt, "failed to read SPI Port Page 0\n");
} else {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Port Page 0: Capabilities %x PhysicalInterface %x\n",
mpt->mpt_port_page0.Capabilities,
mpt->mpt_port_page0.PhysicalInterface);
}
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
&mpt->mpt_port_page1.Header,
sizeof(mpt->mpt_port_page1),
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt, "failed to read SPI Port Page 1\n");
} else {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Port Page 1: Configuration %x OnBusTimerValue %x\n",
mpt->mpt_port_page1.Configuration,
mpt->mpt_port_page1.OnBusTimerValue);
}
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
&mpt->mpt_port_page2.Header,
sizeof(mpt->mpt_port_page2),
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt, "failed to read SPI Port Page 2\n");
} else {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Port Page 2: Flags %x Settings %x\n",
mpt->mpt_port_page2.PortFlags,
mpt->mpt_port_page2.PortSettings);
for (i = 0; i < 16; i++) {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Port Page 2 Tgt %d: timo %x SF %x Flags %x\n",
i, mpt->mpt_port_page2.DeviceSettings[i].Timeout,
mpt->mpt_port_page2.DeviceSettings[i].SyncFactor,
mpt->mpt_port_page2.DeviceSettings[i].DeviceFlags);
}
}
for (i = 0; i < 16; i++) {
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/i,
&mpt->mpt_dev_page0[i].Header,
sizeof(*mpt->mpt_dev_page0),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt,
"cannot read SPI Tgt %d Device Page 0\n", i);
continue;
}
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Tgt %d Page 0: NParms %x Information %x",
i, mpt->mpt_dev_page0[i].NegotiatedParameters,
mpt->mpt_dev_page0[i].Information);
rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/i,
&mpt->mpt_dev_page1[i].Header,
sizeof(*mpt->mpt_dev_page1),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt,
"cannot read SPI Tgt %d Device Page 1\n", i);
continue;
}
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Tgt %d Page 1: RParms %x Configuration %x\n",
i, mpt->mpt_dev_page1[i].RequestedParameters,
mpt->mpt_dev_page1[i].Configuration);
}
return (0);
}
/*
* Validate SPI configuration information.
*
* In particular, validate SPI Port Page 1.
*/
static int
mpt_set_initial_config_spi(struct mpt_softc *mpt)
{
int i, pp1val = ((1 << mpt->mpt_ini_id) << 16) | mpt->mpt_ini_id;
int error;
mpt->mpt_disc_enable = 0xff;
mpt->mpt_tag_enable = 0;
if (mpt->mpt_port_page1.Configuration != pp1val) {
CONFIG_PAGE_SCSI_PORT_1 tmp;
mpt_prt(mpt,
"SPI Port Page 1 Config value bad (%x)- should be %x\n",
mpt->mpt_port_page1.Configuration, pp1val);
tmp = mpt->mpt_port_page1;
tmp.Configuration = pp1val;
error = mpt_write_cur_cfg_page(mpt, /*PageAddress*/0,
&tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (error)
return (-1);
error = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0,
&tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (error)
return (-1);
if (tmp.Configuration != pp1val) {
mpt_prt(mpt,
"failed to reset SPI Port Page 1 Config value\n");
return (-1);
}
mpt->mpt_port_page1 = tmp;
}
for (i = 0; i < 16; i++) {
CONFIG_PAGE_SCSI_DEVICE_1 tmp;
tmp = mpt->mpt_dev_page1[i];
tmp.RequestedParameters = 0;
tmp.Configuration = 0;
mpt_lprt(mpt, MPT_PRT_DEBUG,
"Set Tgt %d SPI DevicePage 1 values to %x 0 %x\n",
i, tmp.RequestedParameters, tmp.Configuration);
error = mpt_write_cur_cfg_page(mpt, /*PageAddress*/i,
&tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (error)
return (-1);
error = mpt_read_cur_cfg_page(mpt, /*PageAddress*/i,
&tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (error)
return (-1);
mpt->mpt_dev_page1[i] = tmp;
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Tgt %d Page 1: RParm %x Configuration %x\n", i,
mpt->mpt_dev_page1[i].RequestedParameters,
mpt->mpt_dev_page1[i].Configuration);
}
return (0);
}
int
mpt_cam_enable(struct mpt_softc *mpt)
{
if (mpt->is_fc) {
if (mpt_read_config_info_fc(mpt)) {
return (EIO);
}
if (mpt_set_initial_config_fc(mpt)) {
return (EIO);
}
} else if (mpt->is_sas) {
if (mpt_read_config_info_sas(mpt)) {
return (EIO);
}
if (mpt_set_initial_config_sas(mpt)) {
return (EIO);
}
} else {
if (mpt_read_config_info_spi(mpt)) {
return (EIO);
}
if (mpt_set_initial_config_spi(mpt)) {
return (EIO);
}
}
return (0);
}
void
mpt_cam_detach(struct mpt_softc *mpt)
{
mpt_handler_t handler;
mpt_terminate_recovery_thread(mpt);
handler.reply_handler = mpt_scsi_reply_handler;
mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
scsi_io_handler_id);
handler.reply_handler = mpt_scsi_tmf_reply_handler;
mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
scsi_tmf_handler_id);
handler.reply_handler = mpt_fc_els_reply_handler;
mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
fc_els_handler_id);
handler.reply_handler = mpt_scsi_tgt_reply_handler;
mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
mpt->scsi_tgt_handler_id);
if (mpt->tmf_req != NULL) {
mpt_free_request(mpt, mpt->tmf_req);
mpt->tmf_req = NULL;
}
if (mpt->sim != NULL) {
xpt_free_path(mpt->path);
xpt_bus_deregister(cam_sim_path(mpt->sim));
cam_sim_free(mpt->sim, TRUE);
mpt->sim = NULL;
}
if (mpt->phydisk_sim != NULL) {
xpt_free_path(mpt->phydisk_path);
xpt_bus_deregister(cam_sim_path(mpt->phydisk_sim));
cam_sim_free(mpt->phydisk_sim, TRUE);
mpt->phydisk_sim = NULL;
}
}
/* This routine is used after a system crash to dump core onto the swap device.
*/
static void
mpt_poll(struct cam_sim *sim)
{
struct mpt_softc *mpt;
mpt = (struct mpt_softc *)cam_sim_softc(sim);
MPT_LOCK(mpt);
mpt_intr(mpt);
MPT_UNLOCK(mpt);
}
/*
* Watchdog timeout routine for SCSI requests.
*/
static void
mpt_timeout(void *arg)
{
union ccb *ccb;
struct mpt_softc *mpt;
request_t *req;
ccb = (union ccb *)arg;
#ifdef NOTYET
mpt = mpt_find_softc(mpt);
if (mpt == NULL)
return;
#else
mpt = ccb->ccb_h.ccb_mpt_ptr;
#endif
MPT_LOCK(mpt);
req = ccb->ccb_h.ccb_req_ptr;
mpt_prt(mpt, "Request %p Timed out.\n", req);
if ((req->state & REQ_STATE_QUEUED) == REQ_STATE_QUEUED) {
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
TAILQ_INSERT_TAIL(&mpt->request_timeout_list, req, links);
req->state |= REQ_STATE_TIMEDOUT;
mpt_wakeup_recovery_thread(mpt);
}
MPT_UNLOCK(mpt);
}
/*
* Callback routine from "bus_dmamap_load" or, in simple cases, called directly.
*
* Takes a list of physical segments and builds the SGL for SCSI IO command
* and forwards the commard to the IOC after one last check that CAM has not
* aborted the transaction.
*/
static void
mpt_execute_req_a64(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
request_t *req, *trq;
char *mpt_off;
union ccb *ccb;
struct mpt_softc *mpt;
int seg, first_lim;
uint32_t flags, nxt_off;
void *sglp;
MSG_REQUEST_HEADER *hdrp;
SGE_SIMPLE64 *se;
SGE_CHAIN64 *ce;
req = (request_t *)arg;
ccb = req->ccb;
mpt = ccb->ccb_h.ccb_mpt_ptr;
req = ccb->ccb_h.ccb_req_ptr;
hdrp = req->req_vbuf;
mpt_off = req->req_vbuf;
if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL;
} else /* if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) */ {
sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL;
}
if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) {
error = EFBIG;
}
bad:
if (error != 0) {
if (error != EFBIG && error != ENOMEM) {
mpt_prt(mpt, "mpt_execute_req: err %d\n", error);
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
cam_status status;
mpt_freeze_ccb(ccb);
if (error == EFBIG) {
status = CAM_REQ_TOO_BIG;
} else if (error == ENOMEM) {
if (mpt->outofbeer == 0) {
mpt->outofbeer = 1;
xpt_freeze_simq(mpt->sim, 1);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"FREEZEQ\n");
}
status = CAM_REQUEUE_REQ;
} else {
status = CAM_REQ_CMP_ERR;
}
mpt_set_ccb_status(ccb, status);
}
if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
request_t *cmd_req =
MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
mpt_free_request(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
return;
}
/*
* No data to transfer?
* Just make a single simple SGL with zero length.
*/
if (mpt->verbose >= MPT_PRT_DEBUG) {
int tidx = ((char *)sglp) - mpt_off;
memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx);
}
if (nseg == 0) {
SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp;
MPI_pSGE_SET_FLAGS(se1,
(MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST));
goto out;
}
flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_64_BIT_ADDRESSING;
if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
}
} else {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
}
}
if (!(ccb->ccb_h.flags & (CAM_SG_LIST_PHYS|CAM_DATA_PHYS))) {
bus_dmasync_op_t op;
if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
op = BUS_DMASYNC_PREREAD;
} else {
op = BUS_DMASYNC_PREWRITE;
}
} else {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
op = BUS_DMASYNC_PREWRITE;
} else {
op = BUS_DMASYNC_PREREAD;
}
}
bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op);
}
/*
* Okay, fill in what we can at the end of the command frame.
* If we have up to MPT_NSGL_FIRST, we can fit them all into
* the command frame.
*
* Otherwise, we fill up through MPT_NSGL_FIRST less one
* SIMPLE64 pointers and start doing CHAIN64 entries after
* that.
*/
if (nseg < MPT_NSGL_FIRST(mpt)) {
first_lim = nseg;
} else {
/*
* Leave room for CHAIN element
*/
first_lim = MPT_NSGL_FIRST(mpt) - 1;
}
se = (SGE_SIMPLE64 *) sglp;
for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) {
uint32_t tf;
bzero(se, sizeof (*se));
se->Address.Low = dm_segs->ds_addr;
if (sizeof(bus_addr_t) > 4) {
se->Address.High = ((uint64_t) dm_segs->ds_addr) >> 32;
}
MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
tf = flags;
if (seg == first_lim - 1) {
tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
}
if (seg == nseg - 1) {
tf |= MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
}
MPI_pSGE_SET_FLAGS(se, tf);
}
if (seg == nseg) {
goto out;
}
/*
* Tell the IOC where to find the first chain element.
*/
hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2;
nxt_off = MPT_RQSL(mpt);
trq = req;
/*
* Make up the rest of the data segments out of a chain element
* (contiained in the current request frame) which points to
* SIMPLE64 elements in the next request frame, possibly ending
* with *another* chain element (if there's more).
*/
while (seg < nseg) {
int this_seg_lim;
uint32_t tf, cur_off;
bus_addr_t chain_list_addr;
/*
* Point to the chain descriptor. Note that the chain
* descriptor is at the end of the *previous* list (whether
* chain or simple).
*/
ce = (SGE_CHAIN64 *) se;
/*
* Before we change our current pointer, make sure we won't
* overflow the request area with this frame. Note that we
* test against 'greater than' here as it's okay in this case
* to have next offset be just outside the request area.
*/
if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) {
nxt_off = MPT_REQUEST_AREA;
goto next_chain;
}
/*
* Set our SGE element pointer to the beginning of the chain
* list and update our next chain list offset.
*/
se = (SGE_SIMPLE64 *) &mpt_off[nxt_off];
cur_off = nxt_off;
nxt_off += MPT_RQSL(mpt);
/*
* Now initialized the chain descriptor.
*/
bzero(ce, sizeof (SGE_CHAIN64));
/*
* Get the physical address of the chain list.
*/
chain_list_addr = trq->req_pbuf;
chain_list_addr += cur_off;
if (sizeof (bus_addr_t) > 4) {
ce->Address.High =
(uint32_t) ((uint64_t)chain_list_addr >> 32);
}
ce->Address.Low = (uint32_t) chain_list_addr;
ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT |
MPI_SGE_FLAGS_64_BIT_ADDRESSING;
/*
* If we have more than a frame's worth of segments left,
* set up the chain list to have the last element be another
* chain descriptor.
*/
if ((nseg - seg) > MPT_NSGL(mpt)) {
this_seg_lim = seg + MPT_NSGL(mpt) - 1;
/*
* The length of the chain is the length in bytes of the
* number of segments plus the next chain element.
*
* The next chain descriptor offset is the length,
* in words, of the number of segments.
*/
ce->Length = (this_seg_lim - seg) *
sizeof (SGE_SIMPLE64);
ce->NextChainOffset = ce->Length >> 2;
ce->Length += sizeof (SGE_CHAIN64);
} else {
this_seg_lim = nseg;
ce->Length = (this_seg_lim - seg) *
sizeof (SGE_SIMPLE64);
}
/*
* Fill in the chain list SGE elements with our segment data.
*
* If we're the last element in this chain list, set the last
* element flag. If we're the completely last element period,
* set the end of list and end of buffer flags.
*/
while (seg < this_seg_lim) {
bzero(se, sizeof (*se));
se->Address.Low = dm_segs->ds_addr;
if (sizeof (bus_addr_t) > 4) {
se->Address.High =
((uint64_t)dm_segs->ds_addr) >> 32;
}
MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
tf = flags;
if (seg == this_seg_lim - 1) {
tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
}
if (seg == nseg - 1) {
tf |= MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
}
MPI_pSGE_SET_FLAGS(se, tf);
se++;
seg++;
dm_segs++;
}
next_chain:
/*
* If we have more segments to do and we've used up all of
* the space in a request area, go allocate another one
* and chain to that.
*/
if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) {
request_t *nrq = mpt_get_request(mpt, FALSE);
if (nrq == NULL) {
error = ENOMEM;
goto bad;
}
/*
* Append the new request area on the tail of our list.
*/
if ((trq = req->chain) == NULL) {
req->chain = nrq;
} else {
while (trq->chain != NULL) {
trq = trq->chain;
}
trq->chain = nrq;
}
trq = nrq;
mpt_off = trq->req_vbuf;
if (mpt->verbose >= MPT_PRT_DEBUG) {
memset(mpt_off, 0xff, MPT_REQUEST_AREA);
}
nxt_off = 0;
}
}
out:
/*
* Last time we need to check if this CCB needs to be aborted.
*/
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
request_t *cmd_req =
MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
}
mpt_prt(mpt,
"mpt_execute_req_a64: I/O cancelled (status 0x%x)\n",
ccb->ccb_h.status & CAM_STATUS_MASK);
if (nseg && (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
bus_dmamap_unload(mpt->buffer_dmat, req->dmap);
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
mpt_free_request(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
return;
}
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
ccb->ccb_h.timeout_ch =
timeout(mpt_timeout, (caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
} else {
callout_handle_init(&ccb->ccb_h.timeout_ch);
}
if (mpt->verbose >= MPT_PRT_DEBUG) {
int nc = 0;
mpt_print_request(req->req_vbuf);
for (trq = req->chain; trq; trq = trq->chain) {
printf(" Additional Chain Area %d\n", nc++);
mpt_dump_sgl(trq->req_vbuf, 0);
}
}
if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req);
#ifdef WE_TRUST_AUTO_GOOD_STATUS
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) &&
csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) {
tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS;
} else {
tgt->state = TGT_STATE_MOVING_DATA;
}
#else
tgt->state = TGT_STATE_MOVING_DATA;
#endif
}
CAMLOCK_2_MPTLOCK(mpt);
mpt_send_cmd(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
}
static void
mpt_execute_req(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
request_t *req, *trq;
char *mpt_off;
union ccb *ccb;
struct mpt_softc *mpt;
int seg, first_lim;
uint32_t flags, nxt_off;
void *sglp;
MSG_REQUEST_HEADER *hdrp;
SGE_SIMPLE32 *se;
SGE_CHAIN32 *ce;
req = (request_t *)arg;
ccb = req->ccb;
mpt = ccb->ccb_h.ccb_mpt_ptr;
req = ccb->ccb_h.ccb_req_ptr;
hdrp = req->req_vbuf;
mpt_off = req->req_vbuf;
if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL;
} else /* if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) */ {
sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL;
}
if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) {
error = EFBIG;
mpt_prt(mpt, "segment count %d too large (max %u)\n",
nseg, mpt->max_seg_cnt);
}
bad:
if (error != 0) {
if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
request_t *cmd_req =
MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
cam_status status;
mpt_freeze_ccb(ccb);
if (error == EFBIG) {
status = CAM_REQ_TOO_BIG;
} else if (error == ENOMEM) {
if (mpt->outofbeer == 0) {
mpt->outofbeer = 1;
xpt_freeze_simq(mpt->sim, 1);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"FREEZEQ\n");
}
status = CAM_REQUEUE_REQ;
} else {
status = CAM_REQ_CMP_ERR;
}
mpt_set_ccb_status(ccb, status);
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
mpt_free_request(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
return;
}
/*
* No data to transfer?
* Just make a single simple SGL with zero length.
*/
if (mpt->verbose >= MPT_PRT_DEBUG) {
int tidx = ((char *)sglp) - mpt_off;
memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx);
}
if (nseg == 0) {
SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp;
MPI_pSGE_SET_FLAGS(se1,
(MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST));
goto out;
}
flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
}
} else {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
}
}
if (!(ccb->ccb_h.flags & (CAM_SG_LIST_PHYS|CAM_DATA_PHYS))) {
bus_dmasync_op_t op;
if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
op = BUS_DMASYNC_PREREAD;
} else {
op = BUS_DMASYNC_PREWRITE;
}
} else {
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
op = BUS_DMASYNC_PREWRITE;
} else {
op = BUS_DMASYNC_PREREAD;
}
}
bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op);
}
/*
* Okay, fill in what we can at the end of the command frame.
* If we have up to MPT_NSGL_FIRST, we can fit them all into
* the command frame.
*
* Otherwise, we fill up through MPT_NSGL_FIRST less one
* SIMPLE32 pointers and start doing CHAIN32 entries after
* that.
*/
if (nseg < MPT_NSGL_FIRST(mpt)) {
first_lim = nseg;
} else {
/*
* Leave room for CHAIN element
*/
first_lim = MPT_NSGL_FIRST(mpt) - 1;
}
se = (SGE_SIMPLE32 *) sglp;
for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) {
uint32_t tf;
bzero(se, sizeof (*se));
se->Address = dm_segs->ds_addr;
MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
tf = flags;
if (seg == first_lim - 1) {
tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
}
if (seg == nseg - 1) {
tf |= MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
}
MPI_pSGE_SET_FLAGS(se, tf);
}
if (seg == nseg) {
goto out;
}
/*
* Tell the IOC where to find the first chain element.
*/
hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2;
nxt_off = MPT_RQSL(mpt);
trq = req;
/*
* Make up the rest of the data segments out of a chain element
* (contiained in the current request frame) which points to
* SIMPLE32 elements in the next request frame, possibly ending
* with *another* chain element (if there's more).
*/
while (seg < nseg) {
int this_seg_lim;
uint32_t tf, cur_off;
bus_addr_t chain_list_addr;
/*
* Point to the chain descriptor. Note that the chain
* descriptor is at the end of the *previous* list (whether
* chain or simple).
*/
ce = (SGE_CHAIN32 *) se;
/*
* Before we change our current pointer, make sure we won't
* overflow the request area with this frame. Note that we
* test against 'greater than' here as it's okay in this case
* to have next offset be just outside the request area.
*/
if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) {
nxt_off = MPT_REQUEST_AREA;
goto next_chain;
}
/*
* Set our SGE element pointer to the beginning of the chain
* list and update our next chain list offset.
*/
se = (SGE_SIMPLE32 *) &mpt_off[nxt_off];
cur_off = nxt_off;
nxt_off += MPT_RQSL(mpt);
/*
* Now initialized the chain descriptor.
*/
bzero(ce, sizeof (SGE_CHAIN32));
/*
* Get the physical address of the chain list.
*/
chain_list_addr = trq->req_pbuf;
chain_list_addr += cur_off;
ce->Address = chain_list_addr;
ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
/*
* If we have more than a frame's worth of segments left,
* set up the chain list to have the last element be another
* chain descriptor.
*/
if ((nseg - seg) > MPT_NSGL(mpt)) {
this_seg_lim = seg + MPT_NSGL(mpt) - 1;
/*
* The length of the chain is the length in bytes of the
* number of segments plus the next chain element.
*
* The next chain descriptor offset is the length,
* in words, of the number of segments.
*/
ce->Length = (this_seg_lim - seg) *
sizeof (SGE_SIMPLE32);
ce->NextChainOffset = ce->Length >> 2;
ce->Length += sizeof (SGE_CHAIN32);
} else {
this_seg_lim = nseg;
ce->Length = (this_seg_lim - seg) *
sizeof (SGE_SIMPLE32);
}
/*
* Fill in the chain list SGE elements with our segment data.
*
* If we're the last element in this chain list, set the last
* element flag. If we're the completely last element period,
* set the end of list and end of buffer flags.
*/
while (seg < this_seg_lim) {
bzero(se, sizeof (*se));
se->Address = dm_segs->ds_addr;
MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
tf = flags;
if (seg == this_seg_lim - 1) {
tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
}
if (seg == nseg - 1) {
tf |= MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
}
MPI_pSGE_SET_FLAGS(se, tf);
se++;
seg++;
dm_segs++;
}
next_chain:
/*
* If we have more segments to do and we've used up all of
* the space in a request area, go allocate another one
* and chain to that.
*/
if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) {
request_t *nrq = mpt_get_request(mpt, FALSE);
if (nrq == NULL) {
error = ENOMEM;
goto bad;
}
/*
* Append the new request area on the tail of our list.
*/
if ((trq = req->chain) == NULL) {
req->chain = nrq;
} else {
while (trq->chain != NULL) {
trq = trq->chain;
}
trq->chain = nrq;
}
trq = nrq;
mpt_off = trq->req_vbuf;
if (mpt->verbose >= MPT_PRT_DEBUG) {
memset(mpt_off, 0xff, MPT_REQUEST_AREA);
}
nxt_off = 0;
}
}
out:
/*
* Last time we need to check if this CCB needs to be aborted.
*/
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
request_t *cmd_req =
MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
}
mpt_prt(mpt, "mpt_execute_req: I/O cancelled (status 0x%x)\n",
ccb->ccb_h.status & CAM_STATUS_MASK);
if (nseg && (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
bus_dmamap_unload(mpt->buffer_dmat, req->dmap);
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
mpt_free_request(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
return;
}
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
ccb->ccb_h.timeout_ch =
timeout(mpt_timeout, (caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
} else {
callout_handle_init(&ccb->ccb_h.timeout_ch);
}
if (mpt->verbose >= MPT_PRT_DEBUG) {
int nc = 0;
mpt_print_request(req->req_vbuf);
for (trq = req->chain; trq; trq = trq->chain) {
printf(" Additional Chain Area %d\n", nc++);
mpt_dump_sgl(trq->req_vbuf, 0);
}
}
if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req);
#ifdef WE_TRUST_AUTO_GOOD_STATUS
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) &&
csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) {
tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS;
} else {
tgt->state = TGT_STATE_MOVING_DATA;
}
#else
tgt->state = TGT_STATE_MOVING_DATA;
#endif
}
CAMLOCK_2_MPTLOCK(mpt);
mpt_send_cmd(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
}
static void
mpt_start(struct cam_sim *sim, union ccb *ccb)
{
request_t *req;
struct mpt_softc *mpt;
MSG_SCSI_IO_REQUEST *mpt_req;
struct ccb_scsiio *csio = &ccb->csio;
struct ccb_hdr *ccbh = &ccb->ccb_h;
bus_dmamap_callback_t *cb;
int raid_passthru;
/* Get the pointer for the physical addapter */
mpt = ccb->ccb_h.ccb_mpt_ptr;
raid_passthru = (sim == mpt->phydisk_sim);
CAMLOCK_2_MPTLOCK(mpt);
/* Get a request structure off the free list */
if ((req = mpt_get_request(mpt, /*sleep_ok*/FALSE)) == NULL) {
if (mpt->outofbeer == 0) {
mpt->outofbeer = 1;
xpt_freeze_simq(mpt->sim, 1);
mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n");
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
return;
}
MPTLOCK_2_CAMLOCK(mpt);
if (sizeof (bus_addr_t) > 4) {
cb = mpt_execute_req_a64;
} else {
cb = mpt_execute_req;
}
#if 0
COWWWWW
if (raid_passthru) {
status = mpt_raid_quiesce_disk(mpt, mpt->raid_disks + ccb->ccb_h.target_id,
request_t *req)
}
#endif
/*
* Link the ccb and the request structure so we can find
* the other knowing either the request or the ccb
*/
req->ccb = ccb;
ccb->ccb_h.ccb_req_ptr = req;
/* Now we build the command for the IOC */
mpt_req = req->req_vbuf;
bzero(mpt_req, sizeof *mpt_req);
mpt_req->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
if (raid_passthru) {
mpt_req->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
}
mpt_req->Bus = 0; /* we don't have multiport devices yet */
mpt_req->SenseBufferLength =
(csio->sense_len < MPT_SENSE_SIZE) ?
csio->sense_len : MPT_SENSE_SIZE;
/*
* We use the message context to find the request structure when we
* Get the command completion interrupt from the IOC.
*/
mpt_req->MsgContext = htole32(req->index | scsi_io_handler_id);
/* Which physical device to do the I/O on */
mpt_req->TargetID = ccb->ccb_h.target_id;
/* We assume a single level LUN type */
if (ccb->ccb_h.target_lun >= 256) {
mpt_req->LUN[0] = 0x40 | ((ccb->ccb_h.target_lun >> 8) & 0x3f);
mpt_req->LUN[1] = ccb->ccb_h.target_lun & 0xff;
} else {
mpt_req->LUN[1] = ccb->ccb_h.target_lun;
}
/* Set the direction of the transfer */
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
mpt_req->Control = MPI_SCSIIO_CONTROL_READ;
else if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
mpt_req->Control = MPI_SCSIIO_CONTROL_WRITE;
else
mpt_req->Control = MPI_SCSIIO_CONTROL_NODATATRANSFER;
if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) {
switch(ccb->csio.tag_action) {
case MSG_HEAD_OF_Q_TAG:
mpt_req->Control |= MPI_SCSIIO_CONTROL_HEADOFQ;
break;
case MSG_ACA_TASK:
mpt_req->Control |= MPI_SCSIIO_CONTROL_ACAQ;
break;
case MSG_ORDERED_Q_TAG:
mpt_req->Control |= MPI_SCSIIO_CONTROL_ORDEREDQ;
break;
case MSG_SIMPLE_Q_TAG:
default:
mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ;
break;
}
} else {
if (mpt->is_fc)
mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ;
else
/* XXX No such thing for a target doing packetized. */
mpt_req->Control |= MPI_SCSIIO_CONTROL_UNTAGGED;
}
if (mpt->is_fc == 0 && mpt->is_sas == 0) {
if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) {
mpt_req->Control |= MPI_SCSIIO_CONTROL_NO_DISCONNECT;
}
}
/* Copy the scsi command block into place */
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0)
bcopy(csio->cdb_io.cdb_ptr, mpt_req->CDB, csio->cdb_len);
else
bcopy(csio->cdb_io.cdb_bytes, mpt_req->CDB, csio->cdb_len);
mpt_req->CDBLength = csio->cdb_len;
mpt_req->DataLength = csio->dxfer_len;
mpt_req->SenseBufferLowAddr = req->sense_pbuf;
/*
* If we have any data to send with this command,
* map it into bus space.
*/
if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if ((ccbh->flags & CAM_SCATTER_VALID) == 0) {
/*
* We've been given a pointer to a single buffer.
*/
if ((ccbh->flags & CAM_DATA_PHYS) == 0) {
/*
* Virtual address that needs to translated into
* one or more physical address ranges.
*/
int error;
int s = splsoftvm();
error = bus_dmamap_load(mpt->buffer_dmat,
req->dmap, csio->data_ptr, csio->dxfer_len,
cb, req, 0);
splx(s);
if (error == EINPROGRESS) {
/*
* So as to maintain ordering,
* freeze the controller queue
* until our mapping is
* returned.
*/
xpt_freeze_simq(mpt->sim, 1);
ccbh->status |= CAM_RELEASE_SIMQ;
}
} else {
/*
* We have been given a pointer to single
* physical buffer.
*/
struct bus_dma_segment seg;
seg.ds_addr =
(bus_addr_t)(vm_offset_t)csio->data_ptr;
seg.ds_len = csio->dxfer_len;
(*cb)(req, &seg, 1, 0);
}
} else {
/*
* We have been given a list of addresses.
* This case could be easily supported but they are not
* currently generated by the CAM subsystem so there
* is no point in wasting the time right now.
*/
struct bus_dma_segment *segs;
if ((ccbh->flags & CAM_SG_LIST_PHYS) == 0) {
(*cb)(req, NULL, 0, EFAULT);
} else {
/* Just use the segments provided */
segs = (struct bus_dma_segment *)csio->data_ptr;
(*cb)(req, segs, csio->sglist_cnt, 0);
}
}
} else {
(*cb)(req, NULL, 0, 0);
}
}
static int
mpt_bus_reset(struct mpt_softc *mpt, int sleep_ok)
{
int error;
u_int status;
error = mpt_scsi_send_tmf(mpt, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
mpt->is_fc ? MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION : 0,
/*bus*/0, /*target_id*/0, /*target_lun*/0, /*abort_ctx*/0,
sleep_ok);
if (error != 0) {
/*
* mpt_scsi_send_tmf hard resets on failure, so no
* need to do so here.
*/
mpt_prt(mpt,
"mpt_bus_reset: mpt_scsi_send_tmf returned %d\n", error);
return (EIO);
}
/* Wait for bus reset to be processed by the IOC. */
error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE,
REQ_STATE_DONE, sleep_ok, /*time_ms*/5000);
status = mpt->tmf_req->IOCStatus;
mpt->tmf_req->state = REQ_STATE_FREE;
if (error) {
mpt_prt(mpt, "mpt_bus_reset: Reset timed-out."
"Resetting controller.\n");
mpt_reset(mpt, /*reinit*/TRUE);
return (ETIMEDOUT);
} else if ((status & MPI_IOCSTATUS_MASK) != MPI_SCSI_STATUS_SUCCESS) {
mpt_prt(mpt, "mpt_bus_reset: TMF Status %d."
"Resetting controller.\n", status);
mpt_reset(mpt, /*reinit*/TRUE);
return (EIO);
}
return (0);
}
static int
mpt_fc_reset_link(struct mpt_softc *mpt, int dowait)
{
int r = 0;
request_t *req;
PTR_MSG_FC_PRIMITIVE_SEND_REQUEST fc;
req = mpt_get_request(mpt, FALSE);
if (req == NULL) {
return (ENOMEM);
}
fc = req->req_vbuf;
memset(fc, 0, sizeof(*fc));
fc->SendFlags = MPI_FC_PRIM_SEND_FLAGS_RESET_LINK;
fc->Function = MPI_FUNCTION_FC_PRIMITIVE_SEND;
fc->MsgContext = htole32(req->index | fc_els_handler_id);
mpt_send_cmd(mpt, req);
if (dowait) {
r = mpt_wait_req(mpt, req, REQ_STATE_DONE,
REQ_STATE_DONE, FALSE, 60 * 1000);
mpt_free_request(mpt, req);
}
return (r);
}
static int
mpt_cam_event(struct mpt_softc *mpt, request_t *req,
MSG_EVENT_NOTIFY_REPLY *msg)
{
switch(msg->Event & 0xFF) {
case MPI_EVENT_UNIT_ATTENTION:
mpt_prt(mpt, "Bus: 0x%02x TargetID: 0x%02x\n",
(msg->Data[0] >> 8) & 0xff, msg->Data[0] & 0xff);
break;
case MPI_EVENT_IOC_BUS_RESET:
/* We generated a bus reset */
mpt_prt(mpt, "IOC Bus Reset Port: %d\n",
(msg->Data[0] >> 8) & 0xff);
xpt_async(AC_BUS_RESET, mpt->path, NULL);
break;
case MPI_EVENT_EXT_BUS_RESET:
/* Someone else generated a bus reset */
mpt_prt(mpt, "External Bus Reset Detected\n");
/*
* These replies don't return EventData like the MPI
* spec says they do
*/
xpt_async(AC_BUS_RESET, mpt->path, NULL);
break;
case MPI_EVENT_RESCAN:
/*
* In general this means a device has been added
* to the loop.
*/
mpt_prt(mpt, "Rescan Port: %d\n", (msg->Data[0] >> 8) & 0xff);
/* xpt_async(AC_FOUND_DEVICE, path, NULL); */
break;
case MPI_EVENT_LINK_STATUS_CHANGE:
mpt_prt(mpt, "Port %d: LinkState: %s\n",
(msg->Data[1] >> 8) & 0xff,
((msg->Data[0] & 0xff) == 0)? "Failed" : "Active");
break;
case MPI_EVENT_LOOP_STATE_CHANGE:
switch ((msg->Data[0] >> 16) & 0xff) {
case 0x01:
mpt_prt(mpt,
"Port 0x%x: FC LinkEvent: LIP(%02x,%02x) "
"(Loop Initialization)\n",
(msg->Data[1] >> 8) & 0xff,
(msg->Data[0] >> 8) & 0xff,
(msg->Data[0] ) & 0xff);
switch ((msg->Data[0] >> 8) & 0xff) {
case 0xF7:
if ((msg->Data[0] & 0xff) == 0xF7) {
mpt_prt(mpt, "Device needs AL_PA\n");
} else {
mpt_prt(mpt, "Device %02x doesn't like "
"FC performance\n",
msg->Data[0] & 0xFF);
}
break;
case 0xF8:
if ((msg->Data[0] & 0xff) == 0xF7) {
mpt_prt(mpt, "Device had loop failure "
"at its receiver prior to acquiring"
" AL_PA\n");
} else {
mpt_prt(mpt, "Device %02x detected loop"
" failure at its receiver\n",
msg->Data[0] & 0xFF);
}
break;
default:
mpt_prt(mpt, "Device %02x requests that device "
"%02x reset itself\n",
msg->Data[0] & 0xFF,
(msg->Data[0] >> 8) & 0xFF);
break;
}
break;
case 0x02:
mpt_prt(mpt, "Port 0x%x: FC LinkEvent: "
"LPE(%02x,%02x) (Loop Port Enable)\n",
(msg->Data[1] >> 8) & 0xff, /* Port */
(msg->Data[0] >> 8) & 0xff, /* Character 3 */
(msg->Data[0] ) & 0xff /* Character 4 */);
break;
case 0x03:
mpt_prt(mpt, "Port 0x%x: FC LinkEvent: "
"LPB(%02x,%02x) (Loop Port Bypass)\n",
(msg->Data[1] >> 8) & 0xff, /* Port */
(msg->Data[0] >> 8) & 0xff, /* Character 3 */
(msg->Data[0] ) & 0xff /* Character 4 */);
break;
default:
mpt_prt(mpt, "Port 0x%x: FC LinkEvent: Unknown "
"FC event (%02x %02x %02x)\n",
(msg->Data[1] >> 8) & 0xff, /* Port */
(msg->Data[0] >> 16) & 0xff, /* Event */
(msg->Data[0] >> 8) & 0xff, /* Character 3 */
(msg->Data[0] ) & 0xff /* Character 4 */);
}
break;
case MPI_EVENT_LOGOUT:
mpt_prt(mpt, "FC Logout Port: %d N_PortID: %02x\n",
(msg->Data[1] >> 8) & 0xff, msg->Data[0]);
break;
case MPI_EVENT_EVENT_CHANGE:
mpt_lprt(mpt, MPT_PRT_DEBUG,
"mpt_cam_event: MPI_EVENT_EVENT_CHANGE\n");
break;
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
/*
* Devices are attachin'.....
*/
mpt_prt(mpt,
"mpt_cam_event: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE\n");
break;
default:
mpt_lprt(mpt, MPT_PRT_WARN, "mpt_cam_event: 0x%x\n",
msg->Event & 0xFF);
return (/*handled*/0);
}
return (/*handled*/1);
}
/*
* Reply path for all SCSI I/O requests, called from our
* interrupt handler by extracting our handler index from
* the MsgContext field of the reply from the IOC.
*
* This routine is optimized for the common case of a
* completion without error. All exception handling is
* offloaded to non-inlined helper routines to minimize
* cache footprint.
*/
static int
mpt_scsi_reply_handler(struct mpt_softc *mpt, request_t *req,
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
MSG_SCSI_IO_REQUEST *scsi_req;
union ccb *ccb;
scsi_req = (MSG_SCSI_IO_REQUEST *)req->req_vbuf;
ccb = req->ccb;
if (ccb == NULL) {
mpt_prt(mpt, "Completion without CCB. Flags %#x, Func %#x\n",
req->state, scsi_req->Function);
mpt_print_scsi_io_request(scsi_req);
return (/*free_reply*/TRUE);
}
untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch);
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
bus_dmasync_op_t op;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_POSTREAD;
else
op = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op);
bus_dmamap_unload(mpt->buffer_dmat, req->dmap);
}
if (reply_frame == NULL) {
/*
* Context only reply, completion without error status.
*/
ccb->csio.resid = 0;
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
ccb->csio.scsi_status = SCSI_STATUS_OK;
} else {
mpt_scsi_reply_frame_handler(mpt, req, reply_frame);
}
if (mpt->outofbeer) {
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
mpt->outofbeer = 0;
mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n");
}
if (scsi_req->Function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH &&
scsi_req->CDB[0] == INQUIRY && (scsi_req->CDB[1] & SI_EVPD) == 0) {
struct scsi_inquiry_data *inq;
/*
* Fake out the device type so that only the
* pass-thru device will attach.
*/
inq = (struct scsi_inquiry_data *)ccb->csio.data_ptr;
inq->device &= ~0x1F;
inq->device |= T_NODEVICE;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
if ((req->state & REQ_STATE_TIMEDOUT) == 0) {
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
} else {
TAILQ_REMOVE(&mpt->request_timeout_list, req, links);
}
if ((req->state & REQ_STATE_NEED_WAKEUP) == 0) {
mpt_free_request(mpt, req);
return (/*free_reply*/TRUE);
}
req->state &= ~REQ_STATE_QUEUED;
req->state |= REQ_STATE_DONE;
wakeup(req);
return (/*free_reply*/TRUE);
}
static int
mpt_scsi_tmf_reply_handler(struct mpt_softc *mpt, request_t *req,
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
MSG_SCSI_TASK_MGMT_REPLY *tmf_reply;
uint16_t status;
KASSERT(req == mpt->tmf_req, ("TMF Reply not using mpt->tmf_req"));
tmf_reply = (MSG_SCSI_TASK_MGMT_REPLY *)reply_frame;
/* Record status of TMF for any waiters. */
req->IOCStatus = tmf_reply->IOCStatus;
status = le16toh(tmf_reply->IOCStatus);
mpt_lprt(mpt,
(status == MPI_IOCSTATUS_SUCCESS)? MPT_PRT_DEBUG : MPT_PRT_ERROR,
"TMF Complete: req %p:%u status 0x%x\n", req, req->serno, status);
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) {
req->state |= REQ_STATE_DONE;
wakeup(req);
} else
mpt->tmf_req->state = REQ_STATE_FREE;
return (/*free_reply*/TRUE);
}
/*
* XXX: Move to definitions file
*/
#define ELS 0x22
#define FC4LS 0x32
#define ABTS 0x81
#define BA_ACC 0x84
#define LS_RJT 0x01
#define LS_ACC 0x02
#define PLOGI 0x03
#define LOGO 0x05
#define SRR 0x14
#define PRLI 0x20
#define PRLO 0x21
#define ADISC 0x52
#define RSCN 0x61
static void
mpt_fc_els_send_response(struct mpt_softc *mpt, request_t *req,
PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp, U8 length)
{
MSG_LINK_SERVICE_RSP_REQUEST tmp;
PTR_MSG_LINK_SERVICE_RSP_REQUEST rsp;
/*
* We are going to reuse the ELS request to send this response back.
*/
rsp = &tmp;
memset(rsp, 0, sizeof(*rsp));
#ifdef USE_IMMEDIATE_LINK_DATA
/*
* Apparently the IMMEDIATE stuff doesn't seem to work.
*/
rsp->RspFlags = LINK_SERVICE_RSP_FLAGS_IMMEDIATE;
#endif
rsp->RspLength = length;
rsp->Function = MPI_FUNCTION_FC_LINK_SRVC_RSP;
rsp->MsgContext = htole32(req->index | fc_els_handler_id);
/*
* Copy over information from the original reply frame to
* it's correct place in the response.
*/
memcpy((U8 *)rsp + 0x0c, (U8 *)rp + 0x1c, 24);
/*
* And now copy back the temporary area to the original frame.
*/
memcpy(req->req_vbuf, rsp, sizeof (MSG_LINK_SERVICE_RSP_REQUEST));
rsp = req->req_vbuf;
#ifdef USE_IMMEDIATE_LINK_DATA
memcpy((U8 *)&rsp->SGL, &((U8 *)req->req_vbuf)[MPT_RQSL(mpt)], length);
#else
{
PTR_SGE_SIMPLE32 se = (PTR_SGE_SIMPLE32) &rsp->SGL;
bus_addr_t paddr = req->req_pbuf;
paddr += MPT_RQSL(mpt);
se->FlagsLength =
MPI_SGE_FLAGS_HOST_TO_IOC |
MPI_SGE_FLAGS_SIMPLE_ELEMENT |
MPI_SGE_FLAGS_LAST_ELEMENT |
MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
se->FlagsLength <<= MPI_SGE_FLAGS_SHIFT;
se->FlagsLength |= (length);
se->Address = (uint32_t) paddr;
}
#endif
/*
* Send it on...
*/
mpt_send_cmd(mpt, req);
}
static int
mpt_fc_els_reply_handler(struct mpt_softc *mpt, request_t *req,
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp =
(PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY) reply_frame;
U8 rctl;
U8 type;
U8 cmd;
U16 status = le16toh(reply_frame->IOCStatus);
U32 *elsbuf;
int do_refresh = TRUE;
mpt_lprt(mpt, MPT_PRT_DEBUG, "FC_ELS Complete: req %p:%u, reply %p\n",
req, req->serno, reply_frame);
if (status != MPI_IOCSTATUS_SUCCESS) {
mpt_prt(mpt, "ELS REPLY STATUS 0x%x for Function %x\n",
status, reply_frame->Function);
if (status == MPI_IOCSTATUS_INVALID_STATE) {
/*
* XXX: to get around shutdown issue
*/
mpt->disabled = 1;
return (TRUE);
}
return (TRUE);
}
/*
* If the function of a link service response, we recycle the
* response to be a refresh for a new link service request.
*/
if (rp->Function == MPI_FUNCTION_FC_LINK_SRVC_RSP) {
mpt_fc_add_els(mpt, req);
return (TRUE);
}
if (rp->Function == MPI_FUNCTION_FC_PRIMITIVE_SEND) {
req->state &= ~REQ_STATE_QUEUED;
req->state |= REQ_STATE_DONE;
if ((req->state & REQ_STATE_NEED_WAKEUP) == 0) {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"Async Primitive Send Complete\n");
mpt_free_request(mpt, req);
} else {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"Sync Primitive Send Complete\n");
wakeup(req);
}
return (TRUE);
}
if (rp->Function != MPI_FUNCTION_FC_LINK_SRVC_BUF_POST) {
mpt_prt(mpt, "unexpected ELS_REPLY: Function 0x%x Flags %x "
"Length %d Message Flags %x\n", rp->Function, rp->Flags,
rp->MsgLength, rp->MsgFlags);
return (TRUE);
}
if (rp->MsgLength <= 5) {
/*
* This is just a ack of an original ELS buffer post
*/
mpt_lprt(mpt, MPT_PRT_DEBUG,
"Recv'd ACK of FC_ELS buf post %p:%u\n", req, req->serno);
return (TRUE);
}
rctl = (le32toh(rp->Rctl_Did) & MPI_FC_RCTL_MASK) >> MPI_FC_RCTL_SHIFT;
type = (le32toh(rp->Type_Fctl) & MPI_FC_TYPE_MASK) >> MPI_FC_TYPE_SHIFT;
elsbuf = &((U32 *)req->req_vbuf)[MPT_RQSL(mpt)/sizeof (U32)];
cmd = be32toh(elsbuf[0]) >> 24;
if (rp->Flags & MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED) {
mpt_lprt(mpt, MPT_PRT_ALWAYS, "ELS_REPLY: response unneeded\n");
return (TRUE);
}
if (rctl == ELS && type == 1) {
switch (cmd) {
case PRLI:
/*
* Send back a PRLI ACC
*/
mpt_prt(mpt, "PRLI from 0x%08x%08x\n",
le32toh(rp->Wwn.PortNameHigh),
le32toh(rp->Wwn.PortNameLow));
elsbuf[0] = htobe32(0x02100014);
elsbuf[1] |= htobe32(0x00000100);
elsbuf[4] = htobe32(0x00000002);
if (mpt->role & MPT_ROLE_TARGET)
elsbuf[4] |= htobe32(0x00000010);
if (mpt->role & MPT_ROLE_INITIATOR)
elsbuf[4] |= htobe32(0x00000020);
mpt_fc_els_send_response(mpt, req, rp, 20);
do_refresh = FALSE;
break;
case PRLO:
memset(elsbuf, 0, 5 * (sizeof (U32)));
elsbuf[0] = htobe32(0x02100014);
elsbuf[1] = htobe32(0x08000100);
mpt_prt(mpt, "PRLO from 0x%08x%08x\n",
le32toh(rp->Wwn.PortNameHigh),
le32toh(rp->Wwn.PortNameLow));
mpt_fc_els_send_response(mpt, req, rp, 20);
do_refresh = FALSE;
break;
default:
mpt_prt(mpt, "ELS TYPE 1 COMMAND: %x\n", cmd);
break;
}
} else if (rctl == ABTS && type == 0) {
uint16_t rx_id = le16toh(rp->Rxid);
uint16_t ox_id = le16toh(rp->Oxid);
request_t *tgt_req = NULL;
mpt_prt(mpt,
"ELS: ABTS OX_ID 0x%x RX_ID 0x%x from 0x%08x%08x\n",
ox_id, rx_id, le32toh(rp->Wwn.PortNameHigh),
le32toh(rp->Wwn.PortNameLow));
if (rx_id >= mpt->mpt_max_tgtcmds) {
mpt_prt(mpt, "Bad RX_ID 0x%x\n", rx_id);
} else if (mpt->tgt_cmd_ptrs == NULL) {
mpt_prt(mpt, "No TGT CMD PTRS\n");
} else {
tgt_req = mpt->tgt_cmd_ptrs[rx_id];
}
if (tgt_req) {
mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, tgt_req);
uint8_t *vbuf;
union ccb *ccb = tgt->ccb;
cam_status cs;
uint32_t ct_id;
vbuf = tgt_req->req_vbuf;
vbuf += MPT_RQSL(mpt);
/*
* Check to make sure we have the correct command
* The reply descriptor in the target state should
* should contain an IoIndex that should match the
* RX_ID.
*
* It'd be nice to have OX_ID to crosscheck with
* as well.
*/
ct_id = GET_IO_INDEX(tgt->reply_desc);
if (ct_id != rx_id) {
mpt_lprt(mpt, MPT_PRT_ERROR, "ABORT Mismatch: "
"RX_ID received=0x%x; RX_ID in cmd=0x%x\n",
rx_id, ct_id);
goto skip;
}
ccb = tgt->ccb;
if (ccb) {
mpt_prt(mpt,
"CCB (%p): lun %u flags %x status %x\n",
ccb, ccb->ccb_h.target_lun,
ccb->ccb_h.flags, ccb->ccb_h.status);
}
mpt_prt(mpt, "target state 0x%x resid %u xfrd %u rpwrd "
"%x nxfers %x flags %x\n", tgt->state,
tgt->resid, tgt->bytes_xfered, tgt->reply_desc,
tgt->nxfers, tgt->flags);
skip:
cs = mpt_abort_target_cmd(mpt, tgt_req);
if (cs != CAM_REQ_INPROG) {
mpt_prt(mpt, "unable to do TargetAbort (%x)\n",
cs);
}
} else {
mpt_prt(mpt, "no back pointer for RX_ID 0x%x\n", rx_id);
}
memset(elsbuf, 0, 5 * (sizeof (U32)));
elsbuf[0] = htobe32(0);
elsbuf[1] = htobe32((ox_id << 16) | rx_id);
elsbuf[2] = htobe32(0x000ffff);
/*
* Dork with the reply frame so that the reponse to it
* will be correct.
*/
rp->Rctl_Did += ((BA_ACC - ABTS) << MPI_FC_RCTL_SHIFT);
mpt_fc_els_send_response(mpt, req, rp, 12);
do_refresh = FALSE;
} else {
mpt_prt(mpt, "ELS: RCTL %x TYPE %x CMD %x\n", rctl, type, cmd);
}
if (do_refresh == TRUE) {
mpt_fc_add_els(mpt, req);
}
return (TRUE);
}
/*
* WE_TRUST_AUTO_GOOD_STATUS- I've found that setting
* TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS leads the
* FC929 to set bogus FC_RSP fields (nonzero residuals
* but w/o RESID fields set). This causes QLogic initiators
* to think maybe that a frame was lost.
*
* WE_CAN_USE_AUTO_REPOST- we can't use AUTO_REPOST because
* we use allocated requests to do TARGET_ASSIST and we
* need to know when to release them.
*/
static void
mpt_scsi_tgt_status(struct mpt_softc *mpt, union ccb *ccb, request_t *cmd_req,
uint8_t status, uint8_t const *sense_data)
{
uint8_t *cmd_vbuf;
mpt_tgt_state_t *tgt;
PTR_MSG_TARGET_STATUS_SEND_REQUEST tp;
request_t *req;
bus_addr_t paddr;
int resplen = 0;
cmd_vbuf = cmd_req->req_vbuf;
cmd_vbuf += MPT_RQSL(mpt);
tgt = MPT_TGT_STATE(mpt, cmd_req);
req = mpt_get_request(mpt, FALSE);
if (req == NULL) {
if (ccb) {
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
} else {
/*
* XXX: put in deferred processing if we cannot allocate
*/
mpt_prt(mpt,
"XXXX could not allocate status req- dropping\n");
}
return;
}
req->ccb = ccb;
if (ccb) {
ccb->ccb_h.ccb_mpt_ptr = mpt;
ccb->ccb_h.ccb_req_ptr = req;
}
/*
* Record the currently active ccb, if any, and the
* request for it in our target state area.
*/
tgt->ccb = ccb;
tgt->req = req;
tgt->state = TGT_STATE_SENDING_STATUS;
tp = req->req_vbuf;
paddr = req->req_pbuf;
paddr += MPT_RQSL(mpt);
memset(tp, 0, sizeof (*tp));
tp->Function = MPI_FUNCTION_TARGET_STATUS_SEND;
if (mpt->is_fc) {
PTR_MPI_TARGET_FCP_CMD_BUFFER fc =
(PTR_MPI_TARGET_FCP_CMD_BUFFER) cmd_vbuf;
uint8_t *sts_vbuf;
uint32_t *rsp;
sts_vbuf = req->req_vbuf;
sts_vbuf += MPT_RQSL(mpt);
rsp = (uint32_t *) sts_vbuf;
memcpy(tp->LUN, fc->FcpLun, sizeof (tp->LUN));
/*
* The MPI_TARGET_FCP_RSP_BUFFER define is unfortunate.
* It has to be big-endian in memory and is organized
* in 32 bit words, which are much easier to deal with
* as words which are swizzled as needed.
*
* All we're filling here is the FC_RSP payload.
* We may just have the chip synthesize it if
* we have no residual and an OK status.
*
*/
memset(rsp, 0, sizeof (MPI_TARGET_FCP_RSP_BUFFER));
rsp[2] = status;
if (tgt->resid) {
rsp[2] |= 0x800;
rsp[3] = htobe32(tgt->resid);
#ifdef WE_TRUST_AUTO_GOOD_STATUS
resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER);
#endif
}
if (status == SCSI_STATUS_CHECK_COND) {
int i;
rsp[2] |= 0x200;
rsp[4] = htobe32(MPT_SENSE_SIZE);
memcpy(&rsp[8], sense_data, MPT_SENSE_SIZE);
for (i = 8; i < (8 + (MPT_SENSE_SIZE >> 2)); i++) {
rsp[i] = htobe32(rsp[i]);
}
#ifdef WE_TRUST_AUTO_GOOD_STATUS
resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER);
#endif
}
#ifndef WE_TRUST_AUTO_GOOD_STATUS
resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER);
#endif
rsp[2] = htobe32(rsp[2]);
} else if (mpt->is_sas) {
PTR_MPI_TARGET_SSP_CMD_BUFFER ssp =
(PTR_MPI_TARGET_SSP_CMD_BUFFER) cmd_vbuf;
memcpy(tp->LUN, ssp->LogicalUnitNumber, sizeof (tp->LUN));
} else {
PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp =
(PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) cmd_vbuf;
tp->StatusCode = status;
tp->QueueTag = htole16(sp->Tag);
memcpy(tp->LUN, sp->LogicalUnitNumber, sizeof (tp->LUN));
}
tp->ReplyWord = htole32(tgt->reply_desc);
tp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
#ifdef WE_CAN_USE_AUTO_REPOST
tp->MsgFlags = TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER;
#endif
if (status == SCSI_STATUS_OK && resplen == 0) {
tp->MsgFlags |= TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS;
} else {
tp->StatusDataSGE.u.Address32 = (uint32_t) paddr;
tp->StatusDataSGE.FlagsLength =
MPI_SGE_FLAGS_HOST_TO_IOC |
MPI_SGE_FLAGS_SIMPLE_ELEMENT |
MPI_SGE_FLAGS_LAST_ELEMENT |
MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
tp->StatusDataSGE.FlagsLength <<= MPI_SGE_FLAGS_SHIFT;
tp->StatusDataSGE.FlagsLength |= resplen;
}
mpt_lprt(mpt, MPT_PRT_DEBUG,
"STATUS_CCB %p (wit%s sense) tag %x req %p:%u resid %u\n",
ccb, sense_data?"h" : "hout", ccb? ccb->csio.tag_id : -1, req,
req->serno, tgt->resid);
if (ccb) {
ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG;
ccb->ccb_h.timeout_ch = timeout(mpt_timeout, (caddr_t)ccb, hz);
}
mpt_send_cmd(mpt, req);
}
static void
mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *mpt, request_t *req, mpt_task_mgmt_t fc,
tgt_resource_t *trtp, int init_id)
{
struct ccb_immed_notify *inot;
mpt_tgt_state_t *tgt;
tgt = MPT_TGT_STATE(mpt, req);
inot = (struct ccb_immed_notify *) STAILQ_FIRST(&trtp->inots);
if (inot == NULL) {
mpt_lprt(mpt, MPT_PRT_WARN, "no INOTSs- sending back BSY\n");
mpt_scsi_tgt_status(mpt, NULL, req, SCSI_STATUS_BUSY, NULL);
return;
}
STAILQ_REMOVE_HEAD(&trtp->inots, sim_links.stqe);
mpt_lprt(mpt, MPT_PRT_DEBUG1,
"Get FREE INOT %p lun %d\n", inot, inot->ccb_h.target_lun);
memset(&inot->sense_data, 0, sizeof (inot->sense_data));
inot->sense_len = 0;
memset(inot->message_args, 0, sizeof (inot->message_args));
inot->initiator_id = init_id; /* XXX */
/*
* This is a somewhat grotesque attempt to map from task management
* to old style SCSI messages. God help us all.
*/
switch (fc) {
case MPT_ABORT_TASK_SET:
inot->message_args[0] = MSG_ABORT_TAG;
break;
case MPT_CLEAR_TASK_SET:
inot->message_args[0] = MSG_CLEAR_TASK_SET;
break;
case MPT_TARGET_RESET:
inot->message_args[0] = MSG_TARGET_RESET;
break;
case MPT_CLEAR_ACA:
inot->message_args[0] = MSG_CLEAR_ACA;
break;
case MPT_TERMINATE_TASK:
inot->message_args[0] = MSG_ABORT_TAG;
break;
default:
inot->message_args[0] = MSG_NOOP;
break;
}
tgt->ccb = (union ccb *) inot;
inot->ccb_h.status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
MPTLOCK_2_CAMLOCK(mpt);
xpt_done((union ccb *)inot);
CAMLOCK_2_MPTLOCK(mpt);
}
static void
mpt_scsi_tgt_atio(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc)
{
struct ccb_accept_tio *atiop;
lun_id_t lun;
int tag_action = 0;
mpt_tgt_state_t *tgt;
tgt_resource_t *trtp;
U8 *lunptr;
U8 *vbuf;
U16 itag;
U16 ioindex;
mpt_task_mgmt_t fct = MPT_NIL_TMT_VALUE;
uint8_t *cdbp;
/*
* First, DMA sync the received command- which is in the *request*
* phys area.
* XXX: We could optimize this for a range
*/
bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap,
BUS_DMASYNC_POSTREAD);
/*
* Stash info for the current command where we can get at it later.
*/
vbuf = req->req_vbuf;
vbuf += MPT_RQSL(mpt);
/*
* Get our state pointer set up.
*/
tgt = MPT_TGT_STATE(mpt, req);
KASSERT(tgt->state == TGT_STATE_LOADED,
("bad target state %x in mpt_scsi_tgt_atio for req %p\n",
tgt->state, req));
memset(tgt, 0, sizeof (mpt_tgt_state_t));
tgt->state = TGT_STATE_IN_CAM;
tgt->reply_desc = reply_desc;
ioindex = GET_IO_INDEX(reply_desc);
if (mpt->is_fc) {
PTR_MPI_TARGET_FCP_CMD_BUFFER fc;
fc = (PTR_MPI_TARGET_FCP_CMD_BUFFER) vbuf;
if (fc->FcpCntl[2]) {
/*
* Task Management Request
*/
switch (fc->FcpCntl[2]) {
case 0x2:
fct = MPT_ABORT_TASK_SET;
break;
case 0x4:
fct = MPT_CLEAR_TASK_SET;
break;
case 0x20:
fct = MPT_TARGET_RESET;
break;
case 0x40:
fct = MPT_CLEAR_ACA;
break;
case 0x80:
fct = MPT_TERMINATE_TASK;
break;
default:
mpt_prt(mpt, "CORRUPTED TASK MGMT BITS: 0x%x\n",
fc->FcpCntl[2]);
mpt_scsi_tgt_status(mpt, 0, req,
SCSI_STATUS_OK, 0);
return;
}
return;
}
switch (fc->FcpCntl[1]) {
case 0:
tag_action = MSG_SIMPLE_Q_TAG;
break;
case 1:
tag_action = MSG_HEAD_OF_Q_TAG;
break;
case 2:
tag_action = MSG_ORDERED_Q_TAG;
break;
default:
/*
* Bah. Ignore Untagged Queing and ACA
*/
tag_action = MSG_SIMPLE_Q_TAG;
break;
}
tgt->resid = be32toh(fc->FcpDl);
cdbp = fc->FcpCdb;
lunptr = fc->FcpLun;
itag = be16toh(fc->OptionalOxid);
} else if (mpt->is_sas) {
PTR_MPI_TARGET_SSP_CMD_BUFFER ssp;
ssp = (PTR_MPI_TARGET_SSP_CMD_BUFFER) vbuf;
cdbp = ssp->CDB;
lunptr = ssp->LogicalUnitNumber;
itag = ssp->InitiatorTag;
} else {
PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp;
sp = (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) vbuf;
cdbp = sp->CDB;
lunptr = sp->LogicalUnitNumber;
itag = sp->Tag;
}
/*
* Generate a simple lun
*/
switch (lunptr[0] & 0xc0) {
case 0x40:
lun = ((lunptr[0] & 0x3f) << 8) | lunptr[1];
break;
case 0:
lun = lunptr[1];
break;
default:
mpt_lprt(mpt, MPT_PRT_ERROR, "cannot handle this type lun\n");
lun = 0xffff;
break;
}
/*
* Deal with non-enabled or bad luns here.
*/
if (lun >= MPT_MAX_LUNS || mpt->tenabled == 0 ||
mpt->trt[lun].enabled == 0) {
if (mpt->twildcard) {
trtp = &mpt->trt_wildcard;
} else {
const uint8_t sp[MPT_SENSE_SIZE] = {
0xf0, 0, 0x5, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0x25
};
mpt_scsi_tgt_status(mpt, NULL, req,
SCSI_STATUS_CHECK_COND, sp);
return;
}
} else {
trtp = &mpt->trt[lun];
}
if (fct != MPT_NIL_TMT_VALUE) {
/* undo any tgt residual settings */
tgt->resid = 0;
mpt_scsi_tgt_tsk_mgmt(mpt, req, fct, trtp,
GET_INITIATOR_INDEX(reply_desc));
return;
}
atiop = (struct ccb_accept_tio *) STAILQ_FIRST(&trtp->atios);
if (atiop == NULL) {
mpt_lprt(mpt, MPT_PRT_WARN,
"no ATIOs for lun %u- sending back %s\n", lun,
mpt->tenabled? "QUEUE FULL" : "BUSY");
mpt_scsi_tgt_status(mpt, NULL, req,
mpt->tenabled? SCSI_STATUS_QUEUE_FULL : SCSI_STATUS_BUSY,
NULL);
return;
}
STAILQ_REMOVE_HEAD(&trtp->atios, sim_links.stqe);
mpt_lprt(mpt, MPT_PRT_DEBUG1,
"Get FREE ATIO %p lun %d\n", atiop, atiop->ccb_h.target_lun);
atiop->ccb_h.ccb_mpt_ptr = mpt;
atiop->ccb_h.status = CAM_CDB_RECVD;
atiop->ccb_h.target_lun = lun;
atiop->sense_len = 0;
atiop->init_id = GET_INITIATOR_INDEX(reply_desc);
atiop->cdb_len = mpt_cdblen(cdbp[0], 16);
memcpy(atiop->cdb_io.cdb_bytes, cdbp, atiop->cdb_len);
/*
* The tag we construct here allows us to find the
* original request that the command came in with.
*
* This way we don't have to depend on anything but the
* tag to find things when CCBs show back up from CAM.
*/
atiop->tag_id = MPT_MAKE_TAGID(mpt, req, ioindex);
if (tag_action) {
atiop->tag_action = tag_action;
atiop->ccb_h.flags = CAM_TAG_ACTION_VALID;
}
if (mpt->verbose >= MPT_PRT_DEBUG) {
int i;
mpt_prt(mpt, "START_CCB %p for lun %u CDB=<", atiop,
atiop->ccb_h.target_lun);
for (i = 0; i < atiop->cdb_len; i++) {
mpt_prtc(mpt, "%02x%c", cdbp[i] & 0xff,
(i == (atiop->cdb_len - 1))? '>' : ' ');
}
mpt_prtc(mpt, " itag %x tag %x rdesc %x dl=%u\n",
itag, atiop->tag_id, tgt->reply_desc, tgt->resid);
}
tgt->ccb = (union ccb *) atiop;
MPTLOCK_2_CAMLOCK(mpt);
xpt_done((union ccb *)atiop);
CAMLOCK_2_MPTLOCK(mpt);
}
static int
mpt_scsi_tgt_reply_handler(struct mpt_softc *mpt, request_t *req,
uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
int dbg;
union ccb *ccb;
U16 status;
if (reply_frame == NULL) {
/*
* Figure out if this is a new command or a target assist
* completing.
*/
mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req);
char serno[8];
if (tgt->req) {
snprintf(serno, 8, "%u", tgt->req->serno);
} else {
strncpy(serno, "??", 8);
}
switch(tgt->state) {
case TGT_STATE_LOADED:
mpt_scsi_tgt_atio(mpt, req, reply_desc);
break;
case TGT_STATE_MOVING_DATA:
{
uint8_t *sp = NULL, sense[MPT_SENSE_SIZE];
ccb = tgt->ccb;
tgt->ccb = NULL;
tgt->nxfers++;
untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"TARGET_ASSIST %p (req %p:%s) done tag 0x%x\n",
ccb, tgt->req, serno, ccb->csio.tag_id);
/*
* Free the Target Assist Request
*/
KASSERT(tgt->req && tgt->req->ccb == ccb,
("tgt->req %p:%s tgt->req->ccb %p", tgt->req,
serno, tgt->req? tgt->req->ccb : NULL));
mpt_free_request(mpt, tgt->req);
tgt->req = NULL;
/*
* Do we need to send status now? That is, are
* we done with all our data transfers?
*/
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) {
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status,
("zero ccb sts at %d\n", __LINE__));
tgt->state = TGT_STATE_IN_CAM;
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
break;
}
if (ccb->ccb_h.flags & CAM_SEND_SENSE) {
sp = sense;
memcpy(sp, &ccb->csio.sense_data,
min(ccb->csio.sense_len, MPT_SENSE_SIZE));
}
mpt_scsi_tgt_status(mpt, ccb, req,
ccb->csio.scsi_status, sp);
break;
}
case TGT_STATE_SENDING_STATUS:
case TGT_STATE_MOVING_DATA_AND_STATUS:
{
int ioindex;
ccb = tgt->ccb;
if (ccb) {
tgt->ccb = NULL;
tgt->nxfers++;
untimeout(mpt_timeout, ccb,
ccb->ccb_h.timeout_ch);
if (ccb->ccb_h.flags & CAM_SEND_SENSE) {
ccb->ccb_h.status |= CAM_SENT_SENSE;
}
mpt_lprt(mpt, MPT_PRT_DEBUG,
"TARGET_STATUS tag %x sts %x flgs %x req "
"%p\n", ccb->csio.tag_id, ccb->ccb_h.status,
ccb->ccb_h.flags, tgt->req);
/*
* Free the Target Send Status Request
*/
KASSERT(tgt->req && tgt->req->ccb == ccb,
("tgt->req %p:%s tgt->req->ccb %p",
tgt->req, serno,
tgt->req? tgt->req->ccb : NULL));
/*
* Notify CAM that we're done
*/
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
KASSERT(ccb->ccb_h.status,
("ZERO ccb sts at %d\n", __LINE__));
tgt->ccb = NULL;
} else {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"TARGET_STATUS non-CAM for req %p:%s\n",
tgt->req, serno);
}
mpt_free_request(mpt, tgt->req);
tgt->req = NULL;
/*
* And re-post the Command Buffer.
*/
ioindex = GET_IO_INDEX(reply_desc);
mpt_post_target_command(mpt, req, ioindex);
/*
* And post a done for anyone who cares
*/
if (ccb) {
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
}
break;
}
case TGT_STATE_NIL: /* XXX This Never Happens XXX */
tgt->state = TGT_STATE_LOADED;
break;
default:
mpt_prt(mpt, "Unknown Target State 0x%x in Context "
"Reply Function\n", tgt->state);
}
return (TRUE);
}
status = le16toh(reply_frame->IOCStatus);
if (status != MPI_IOCSTATUS_SUCCESS) {
dbg = MPT_PRT_ERROR;
} else {
dbg = MPT_PRT_DEBUG1;
}
mpt_lprt(mpt, dbg,
"SCSI_TGT REPLY: req=%p:%u reply=%p func=%x IOCstatus 0x%x\n",
req, req->serno, reply_frame, reply_frame->Function, status);
switch (reply_frame->Function) {
case MPI_FUNCTION_TARGET_CMD_BUFFER_POST:
KASSERT(MPT_TGT_STATE(mpt,
req)->state == TGT_STATE_NIL,
("bad state %x on reply to buffer post\n",
MPT_TGT_STATE(mpt, req)->state));
MPT_TGT_STATE(mpt, req)->state = TGT_STATE_LOADED;
break;
case MPI_FUNCTION_TARGET_ASSIST:
mpt_prt(mpt,
"TARGET_ASSIST err for request %p:%u (%x): status 0x%x\n",
req, req->serno, req->index, status);
mpt_free_request(mpt, req);
break;
case MPI_FUNCTION_TARGET_STATUS_SEND:
mpt_prt(mpt,
"TARGET_STATUS_SEND error for request %p:%u(%x): status "
"0x%x\n", req, req->serno, req->index, status);
mpt_free_request(mpt, req);
break;
case MPI_FUNCTION_TARGET_MODE_ABORT:
{
PTR_MSG_TARGET_MODE_ABORT_REPLY abtrp =
(PTR_MSG_TARGET_MODE_ABORT_REPLY) reply_frame;
PTR_MSG_TARGET_MODE_ABORT abtp =
(PTR_MSG_TARGET_MODE_ABORT) req->req_vbuf;
uint32_t cc = GET_IO_INDEX(le32toh(abtp->ReplyWord));
mpt_prt(mpt, "ABORT RX_ID 0x%x Complete; status 0x%x cnt %u\n",
cc, le16toh(abtrp->IOCStatus), le32toh(abtrp->AbortCount));
mpt_free_request(mpt, req);
break;
}
default:
mpt_prt(mpt, "Unknown Target Address Reply Function code: "
"0x%x\n", reply_frame->Function);
break;
}
return (TRUE);
}
/*
* Clean up all SCSI Initiator personality state in response
* to a controller reset.
*/
static void
mpt_cam_ioc_reset(struct mpt_softc *mpt, int type)
{
/*
* The pending list is already run down by
* the generic handler. Perform the same
* operation on the timed out request list.
*/
mpt_complete_request_chain(mpt, &mpt->request_timeout_list,
MPI_IOCSTATUS_INVALID_STATE);
/*
* Inform the XPT that a bus reset has occurred.
*/
xpt_async(AC_BUS_RESET, mpt->path, NULL);
}
/*
* Parse additional completion information in the reply
* frame for SCSI I/O requests.
*/
static int
mpt_scsi_reply_frame_handler(struct mpt_softc *mpt, request_t *req,
MSG_DEFAULT_REPLY *reply_frame)
{
union ccb *ccb;
MSG_SCSI_IO_REPLY *scsi_io_reply;
u_int ioc_status;
u_int sstate;
u_int loginfo;
MPT_DUMP_REPLY_FRAME(mpt, reply_frame);
KASSERT(reply_frame->Function == MPI_FUNCTION_SCSI_IO_REQUEST
|| reply_frame->Function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH,
("MPT SCSI I/O Handler called with incorrect reply type"));
KASSERT((reply_frame->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) == 0,
("MPT SCSI I/O Handler called with continuation reply"));
scsi_io_reply = (MSG_SCSI_IO_REPLY *)reply_frame;
ioc_status = le16toh(scsi_io_reply->IOCStatus);
loginfo = ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE;
ioc_status &= MPI_IOCSTATUS_MASK;
sstate = scsi_io_reply->SCSIState;
ccb = req->ccb;
ccb->csio.resid =
ccb->csio.dxfer_len - le32toh(scsi_io_reply->TransferCount);
if ((sstate & MPI_SCSI_STATE_AUTOSENSE_VALID) != 0
&& (ccb->ccb_h.flags & (CAM_SENSE_PHYS | CAM_SENSE_PTR)) == 0) {
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
ccb->csio.sense_resid =
ccb->csio.sense_len - scsi_io_reply->SenseCount;
bcopy(req->sense_vbuf, &ccb->csio.sense_data,
min(ccb->csio.sense_len, scsi_io_reply->SenseCount));
}
if ((sstate & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) != 0) {
/*
* Tag messages rejected, but non-tagged retry
* was successful.
XXXX
mpt_set_tags(mpt, devinfo, MPT_QUEUE_NONE);
*/
}
switch(ioc_status) {
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
/*
* XXX
* Linux driver indicates that a zero
* transfer length with this error code
* indicates a CRC error.
*
* No need to swap the bytes for checking
* against zero.
*/
if (scsi_io_reply->TransferCount == 0) {
mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY);
break;
}
/* FALLTHROUGH */
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
case MPI_IOCSTATUS_SUCCESS:
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:
if ((sstate & MPI_SCSI_STATE_NO_SCSI_STATUS) != 0) {
/*
* Status was never returned for this transaction.
*/
mpt_set_ccb_status(ccb, CAM_UNEXP_BUSFREE);
} else if (scsi_io_reply->SCSIStatus != SCSI_STATUS_OK) {
ccb->csio.scsi_status = scsi_io_reply->SCSIStatus;
mpt_set_ccb_status(ccb, CAM_SCSI_STATUS_ERROR);
if ((sstate & MPI_SCSI_STATE_AUTOSENSE_FAILED) != 0)
mpt_set_ccb_status(ccb, CAM_AUTOSENSE_FAIL);
} else if ((sstate & MPI_SCSI_STATE_RESPONSE_INFO_VALID) != 0) {
/* XXX Handle SPI-Packet and FCP-2 reponse info. */
mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
} else
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
break;
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
mpt_set_ccb_status(ccb, CAM_DATA_RUN_ERR);
break;
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY);
break;
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
/*
* Since selection timeouts and "device really not
* there" are grouped into this error code, report
* selection timeout. Selection timeouts are
* typically retried before giving up on the device
* whereas "device not there" errors are considered
* unretryable.
*/
mpt_set_ccb_status(ccb, CAM_SEL_TIMEOUT);
break;
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
mpt_set_ccb_status(ccb, CAM_SEQUENCE_FAIL);
break;
case MPI_IOCSTATUS_SCSI_INVALID_BUS:
mpt_set_ccb_status(ccb, CAM_PATH_INVALID);
break;
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
mpt_set_ccb_status(ccb, CAM_TID_INVALID);
break;
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
ccb->ccb_h.status = CAM_UA_TERMIO;
break;
case MPI_IOCSTATUS_INVALID_STATE:
/*
* The IOC has been reset. Emulate a bus reset.
*/
/* FALLTHROUGH */
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
ccb->ccb_h.status = CAM_SCSI_BUS_RESET;
break;
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
/*
* Don't clobber any timeout status that has
* already been set for this transaction. We
* want the SCSI layer to be able to differentiate
* between the command we aborted due to timeout
* and any innocent bystanders.
*/
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG)
break;
mpt_set_ccb_status(ccb, CAM_REQ_TERMIO);
break;
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
mpt_set_ccb_status(ccb, CAM_RESRC_UNAVAIL);
break;
case MPI_IOCSTATUS_BUSY:
mpt_set_ccb_status(ccb, CAM_BUSY);
break;
case MPI_IOCSTATUS_INVALID_FUNCTION:
case MPI_IOCSTATUS_INVALID_SGL:
case MPI_IOCSTATUS_INTERNAL_ERROR:
case MPI_IOCSTATUS_INVALID_FIELD:
default:
/* XXX
* Some of the above may need to kick
* of a recovery action!!!!
*/
ccb->ccb_h.status = CAM_UNREC_HBA_ERROR;
break;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
mpt_freeze_ccb(ccb);
return (/*free_reply*/TRUE);
}
static void
mpt_action(struct cam_sim *sim, union ccb *ccb)
{
struct mpt_softc *mpt;
struct ccb_trans_settings *cts;
u_int tgt;
int raid_passthru;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mpt_action\n"));
mpt = (struct mpt_softc *)cam_sim_softc(sim);
raid_passthru = (sim == mpt->phydisk_sim);
tgt = ccb->ccb_h.target_id;
if (raid_passthru && ccb->ccb_h.func_code != XPT_PATH_INQ &&
ccb->ccb_h.func_code != XPT_RESET_BUS) {
CAMLOCK_2_MPTLOCK(mpt);
if (mpt_map_physdisk(mpt, ccb, &tgt) != 0) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_DEV_NOT_THERE);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
return;
}
MPTLOCK_2_CAMLOCK(mpt);
}
ccb->ccb_h.ccb_mpt_ptr = mpt;
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: /* Execute the requested I/O operation */
/*
* Do a couple of preliminary checks...
*/
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
break;
}
}
/* Max supported CDB length is 16 bytes */
/* XXX Unless we implement the new 32byte message type */
if (ccb->csio.cdb_len >
sizeof (((PTR_MSG_SCSI_IO_REQUEST)0)->CDB)) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
return;
}
ccb->csio.scsi_status = SCSI_STATUS_OK;
mpt_start(sim, ccb);
break;
case XPT_RESET_BUS:
mpt_lprt(mpt, MPT_PRT_DEBUG, "XPT_RESET_BUS\n");
if (!raid_passthru) {
CAMLOCK_2_MPTLOCK(mpt);
(void)mpt_bus_reset(mpt, /*sleep_ok*/FALSE);
MPTLOCK_2_CAMLOCK(mpt);
}
/*
* mpt_bus_reset is always successful in that it
* will fall back to a hard reset should a bus
* reset attempt fail.
*/
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
xpt_done(ccb);
break;
case XPT_ABORT:
{
union ccb *accb = ccb->cab.abort_ccb;
CAMLOCK_2_MPTLOCK(mpt);
switch (accb->ccb_h.func_code) {
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
ccb->ccb_h.status = mpt_abort_target_ccb(mpt, ccb);
break;
case XPT_CONT_TARGET_IO:
mpt_prt(mpt, "cannot abort active CTIOs yet\n");
ccb->ccb_h.status = CAM_UA_ABORT;
break;
case XPT_SCSI_IO:
ccb->ccb_h.status = CAM_UA_ABORT;
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
break;
}
#ifdef CAM_NEW_TRAN_CODE
#define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS)
#else
#define IS_CURRENT_SETTINGS(c) (c->flags & CCB_TRANS_CURRENT_SETTINGS)
#endif
#define DP_DISC_ENABLE 0x1
#define DP_DISC_DISABL 0x2
#define DP_DISC (DP_DISC_ENABLE|DP_DISC_DISABL)
#define DP_TQING_ENABLE 0x4
#define DP_TQING_DISABL 0x8
#define DP_TQING (DP_TQING_ENABLE|DP_TQING_DISABL)
#define DP_WIDE 0x10
#define DP_NARROW 0x20
#define DP_WIDTH (DP_WIDE|DP_NARROW)
#define DP_SYNC 0x40
case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */
cts = &ccb->cts;
if (!IS_CURRENT_SETTINGS(cts)) {
mpt_prt(mpt, "Attempt to set User settings\n");
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
break;
}
if (mpt->is_fc == 0 && mpt->is_sas == 0) {
uint8_t dval = 0;
u_int period = 0, offset = 0;
#ifndef CAM_NEW_TRAN_CODE
if (cts->valid & CCB_TRANS_DISC_VALID) {
dval |= DP_DISC_ENABLE;
}
if (cts->valid & CCB_TRANS_TQ_VALID) {
dval |= DP_TQING_ENABLE;
}
if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) {
if (cts->bus_width)
dval |= DP_WIDE;
else
dval |= DP_NARROW;
}
/*
* Any SYNC RATE of nonzero and SYNC_OFFSET
* of nonzero will cause us to go to the
* selected (from NVRAM) maximum value for
* this device. At a later point, we'll
* allow finer control.
*/
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
(cts->valid & CCB_TRANS_SYNC_OFFSET_VALID)) {
dval |= DP_SYNC;
period = cts->sync_period;
offset = cts->sync_offset;
}
#else
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
dval |= DP_DISC_ENABLE;
else
dval |= DP_DISC_DISABL;
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
dval |= DP_TQING_ENABLE;
else
dval |= DP_TQING_DISABL;
}
if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
if (spi->bus_width == MSG_EXT_WDTR_BUS_16_BIT)
dval |= DP_WIDE;
else
dval |= DP_NARROW;
}
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) &&
(spi->valid & CTS_SPI_VALID_SYNC_RATE) &&
(spi->sync_period && spi->sync_offset)) {
dval |= DP_SYNC;
period = spi->sync_period;
offset = spi->sync_offset;
}
#endif
CAMLOCK_2_MPTLOCK(mpt);
if (dval & DP_DISC_ENABLE) {
mpt->mpt_disc_enable |= (1 << tgt);
} else if (dval & DP_DISC_DISABL) {
mpt->mpt_disc_enable &= ~(1 << tgt);
}
if (dval & DP_TQING_ENABLE) {
mpt->mpt_tag_enable |= (1 << tgt);
} else if (dval & DP_TQING_DISABL) {
mpt->mpt_tag_enable &= ~(1 << tgt);
}
if (dval & DP_WIDTH) {
if (mpt_setwidth(mpt, tgt, dval & DP_WIDE)) {
mpt_prt(mpt, "Set width Failed!\n");
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb,
CAM_REQ_CMP_ERR);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
break;
}
}
if (dval & DP_SYNC) {
if (mpt_setsync(mpt, tgt, period, offset)) {
mpt_prt(mpt, "Set sync Failed!\n");
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb,
CAM_REQ_CMP_ERR);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
break;
}
}
MPTLOCK_2_CAMLOCK(mpt);
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SET tgt %d flags %x period %x off %x\n",
tgt, dval, period, offset);
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
if (mpt->is_fc) {
#ifndef CAM_NEW_TRAN_CODE
/*
* a lot of normal SCSI things don't make sense.
*/
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
#else
struct ccb_trans_settings_fc *fc =
&cts->xport_specific.fc;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_FC;
cts->transport_version = 0;
fc->valid = CTS_FC_VALID_SPEED;
fc->bitrate = 100000; /* XXX: Need for 2Gb/s */
/* XXX: need a port database for each target */
#endif
} else if (mpt->is_sas) {
#ifndef CAM_NEW_TRAN_CODE
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
#else
struct ccb_trans_settings_sas *sas =
&cts->xport_specific.sas;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_3;
cts->transport = XPORT_SAS;
cts->transport_version = 0;
sas->valid = CTS_SAS_VALID_SPEED;
sas->bitrate = 300000; /* XXX: Default 3Gbps */
#endif
} else {
#ifdef CAM_NEW_TRAN_CODE
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
#endif
uint8_t dval, pval, oval;
int rv;
/*
* We aren't going off of Port PAGE2 params for
* tagged queuing or disconnect capabilities
* for current settings. For goal settings,
* we assert all capabilities- we've had some
* problems with reading NVRAM data.
*/
if (IS_CURRENT_SETTINGS(cts)) {
CONFIG_PAGE_SCSI_DEVICE_0 tmp;
dval = 0;
tmp = mpt->mpt_dev_page0[tgt];
CAMLOCK_2_MPTLOCK(mpt);
rv = mpt_read_cur_cfg_page(mpt, tgt,
&tmp.Header,
sizeof(tmp),
/*sleep_ok*/FALSE,
/*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt,
"cannot get target %d DP0\n", tgt);
}
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Tgt %d Page 0: NParms %x "
"Information %x\n", tgt,
tmp.NegotiatedParameters,
tmp.Information);
MPTLOCK_2_CAMLOCK(mpt);
if (tmp.NegotiatedParameters &
MPI_SCSIDEVPAGE0_NP_WIDE)
dval |= DP_WIDE;
if (mpt->mpt_disc_enable & (1 << tgt)) {
dval |= DP_DISC_ENABLE;
}
if (mpt->mpt_tag_enable & (1 << tgt)) {
dval |= DP_TQING_ENABLE;
}
oval = (tmp.NegotiatedParameters >> 16) & 0xff;
pval = (tmp.NegotiatedParameters >> 8) & 0xff;
} else {
/*
* XXX: Fix wrt NVRAM someday. Attempts
* XXX: to read port page2 device data
* XXX: just returns zero in these areas.
*/
dval = DP_WIDE|DP_DISC|DP_TQING;
oval = (mpt->mpt_port_page0.Capabilities >> 16);
pval = (mpt->mpt_port_page0.Capabilities >> 8);
}
#ifndef CAM_NEW_TRAN_CODE
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if (dval & DP_DISC_ENABLE) {
cts->flags |= CCB_TRANS_DISC_ENB;
}
if (dval & DP_TQING_ENABLE) {
cts->flags |= CCB_TRANS_TAG_ENB;
}
if (dval & DP_WIDE) {
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if (oval) {
cts->sync_period = pval;
cts->sync_offset = oval;
cts->valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
#else
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
if (dval & DP_DISC_ENABLE) {
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
}
if (dval & DP_TQING_ENABLE) {
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
}
if (oval && pval) {
spi->sync_offset = oval;
spi->sync_period = pval;
spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
spi->valid |= CTS_SPI_VALID_SYNC_RATE;
}
spi->valid |= CTS_SPI_VALID_BUS_WIDTH;
if (dval & DP_WIDE) {
spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
scsi->valid = CTS_SCSI_VALID_TQ;
spi->valid |= CTS_SPI_VALID_DISC;
} else {
scsi->valid = 0;
}
#endif
mpt_lprt(mpt, MPT_PRT_DEBUG,
"GET %s tgt %d flags %x period %x offset %x\n",
IS_CURRENT_SETTINGS(cts)
? "ACTIVE" : "NVRAM",
tgt, dval, pval, oval);
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
ccg = &ccb->ccg;
if (ccg->block_size == 0) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
break;
}
mpt_calc_geometry(ccg, /*extended*/1);
KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
xpt_done(ccb);
break;
}
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
cpi->target_sprt = 0;
cpi->hba_eng_cnt = 0;
cpi->max_lun = 7;
cpi->bus_id = cam_sim_bus(sim);
/* XXX Report base speed more accurately for FC/SAS, etc.*/
if (raid_passthru) {
cpi->max_target = mpt->ioc_page2->MaxPhysDisks;
cpi->hba_misc = PIM_NOBUSRESET;
cpi->initiator_id = cpi->max_target + 1;
cpi->hba_inquiry = PI_TAG_ABLE;
if (mpt->is_fc) {
cpi->base_transfer_speed = 100000;
} else if (mpt->is_sas) {
cpi->base_transfer_speed = 300000;
} else {
cpi->base_transfer_speed = 3300;
cpi->hba_inquiry |=
PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
}
} else if (mpt->is_fc) {
/* XXX SHOULD BE BASED UPON IOC FACTS XXX XXX */
cpi->max_target = 255;
cpi->hba_misc = PIM_NOBUSRESET;
cpi->initiator_id = mpt->mpt_ini_id;
cpi->base_transfer_speed = 100000;
cpi->hba_inquiry = PI_TAG_ABLE;
} else if (mpt->is_sas) {
cpi->max_target = 63; /* XXX */
cpi->hba_misc = PIM_NOBUSRESET;
cpi->initiator_id = mpt->mpt_ini_id;
cpi->base_transfer_speed = 300000;
cpi->hba_inquiry = PI_TAG_ABLE;
} else {
cpi->initiator_id = mpt->mpt_ini_id;
cpi->base_transfer_speed = 3300;
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->hba_misc = 0;
cpi->max_target = 15;
}
if ((mpt->role & MPT_ROLE_INITIATOR) == 0) {
cpi->hba_misc |= PIM_NOINITIATOR;
}
if ((mpt->role & MPT_ROLE_TARGET) != 0) {
cpi->target_sprt =
PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO;
} else {
cpi->target_sprt = 0;
}
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "LSI", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_EN_LUN: /* Enable LUN as a target */
{
int result;
CAMLOCK_2_MPTLOCK(mpt);
if (ccb->cel.enable)
result = mpt_enable_lun(mpt,
ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
else
result = mpt_disable_lun(mpt,
ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
MPTLOCK_2_CAMLOCK(mpt);
if (result == 0) {
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
} else {
mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
}
xpt_done(ccb);
break;
}
case XPT_NOTIFY_ACK: /* recycle notify ack */
case XPT_IMMED_NOTIFY: /* Add Immediate Notify Resource */
case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */
{
tgt_resource_t *trtp;
lun_id_t lun = ccb->ccb_h.target_lun;
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = mpt;
ccb->ccb_h.flags = 0;
if (lun == CAM_LUN_WILDCARD) {
if (ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
break;
}
trtp = &mpt->trt_wildcard;
} else if (lun >= MPT_MAX_LUNS) {
mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
xpt_done(ccb);
break;
} else {
trtp = &mpt->trt[lun];
}
CAMLOCK_2_MPTLOCK(mpt);
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
mpt_lprt(mpt, MPT_PRT_DEBUG1,
"Put FREE ATIO %p lun %d\n", ccb, lun);
STAILQ_INSERT_TAIL(&trtp->atios, &ccb->ccb_h,
sim_links.stqe);
} else if (ccb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
mpt_lprt(mpt, MPT_PRT_DEBUG1,
"Put FREE INOT lun %d\n", lun);
STAILQ_INSERT_TAIL(&trtp->inots, &ccb->ccb_h,
sim_links.stqe);
} else {
mpt_lprt(mpt, MPT_PRT_ALWAYS, "Got Notify ACK\n");
}
mpt_set_ccb_status(ccb, CAM_REQ_INPROG);
MPTLOCK_2_CAMLOCK(mpt);
break;
}
case XPT_CONT_TARGET_IO:
CAMLOCK_2_MPTLOCK(mpt);
mpt_target_start_io(mpt, ccb);
MPTLOCK_2_CAMLOCK(mpt);
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static int
mpt_setwidth(struct mpt_softc *mpt, int tgt, int onoff)
{
CONFIG_PAGE_SCSI_DEVICE_1 tmp;
int rv;
tmp = mpt->mpt_dev_page1[tgt];
if (onoff) {
tmp.RequestedParameters |= MPI_SCSIDEVPAGE1_RP_WIDE;
} else {
tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_WIDE;
}
rv = mpt_write_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt, "mpt_setwidth: write cur page failed\n");
return (-1);
}
rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt, "mpt_setwidth: read cur page failed\n");
return (-1);
}
mpt->mpt_dev_page1[tgt] = tmp;
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Target %d Page 1: RequestedParameters %x Config %x\n",
tgt, mpt->mpt_dev_page1[tgt].RequestedParameters,
mpt->mpt_dev_page1[tgt].Configuration);
return (0);
}
static int
mpt_setsync(struct mpt_softc *mpt, int tgt, int period, int offset)
{
CONFIG_PAGE_SCSI_DEVICE_1 tmp;
int rv;
tmp = mpt->mpt_dev_page1[tgt];
tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK;
tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK;
tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_DT;
tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_QAS;
tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_IU;
/*
* XXX: For now, we're ignoring specific settings
*/
if (period && offset) {
int factor, offset, np;
factor = (mpt->mpt_port_page0.Capabilities >> 8) & 0xff;
offset = (mpt->mpt_port_page0.Capabilities >> 16) & 0xff;
np = 0;
if (factor < 0x9) {
np |= MPI_SCSIDEVPAGE1_RP_QAS;
np |= MPI_SCSIDEVPAGE1_RP_IU;
}
if (factor < 0xa) {
np |= MPI_SCSIDEVPAGE1_RP_DT;
}
np |= (factor << 8) | (offset << 16);
tmp.RequestedParameters |= np;
}
rv = mpt_write_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE, /*timeout_ms*/5000);
if (rv) {
mpt_prt(mpt, "mpt_setsync: write cur page failed\n");
return (-1);
}
rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp),
/*sleep_ok*/FALSE, /*timeout_ms*/500);
if (rv) {
mpt_prt(mpt, "mpt_setsync: read cur page failed\n");
return (-1);
}
mpt->mpt_dev_page1[tgt] = tmp;
mpt_lprt(mpt, MPT_PRT_DEBUG,
"SPI Target %d Page 1: RParams %x Config %x\n",
tgt, mpt->mpt_dev_page1[tgt].RequestedParameters,
mpt->mpt_dev_page1[tgt].Configuration);
return (0);
}
static void
mpt_calc_geometry(struct ccb_calc_geometry *ccg, int extended)
{
#if __FreeBSD_version >= 500000
cam_calc_geometry(ccg, extended);
#else
uint32_t size_mb;
uint32_t secs_per_cylinder;
if (ccg->block_size == 0) {
ccg->ccb_h.status = CAM_REQ_INVALID;
return;
}
size_mb = ccg->volume_size / ((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024 && extended) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccg->ccb_h.status = CAM_REQ_CMP;
#endif
}
/****************************** Timeout Recovery ******************************/
static int
mpt_spawn_recovery_thread(struct mpt_softc *mpt)
{
int error;
error = mpt_kthread_create(mpt_recovery_thread, mpt,
&mpt->recovery_thread, /*flags*/0,
/*altstack*/0, "mpt_recovery%d", mpt->unit);
return (error);
}
static void
mpt_terminate_recovery_thread(struct mpt_softc *mpt)
{
if (mpt->recovery_thread == NULL) {
return;
}
mpt->shutdwn_recovery = 1;
wakeup(mpt);
/*
* Sleep on a slightly different location
* for this interlock just for added safety.
*/
mpt_sleep(mpt, &mpt->recovery_thread, PUSER, "thtrm", 0);
}
static void
mpt_recovery_thread(void *arg)
{
struct mpt_softc *mpt;
#if __FreeBSD_version >= 500000
mtx_lock(&Giant);
#endif
mpt = (struct mpt_softc *)arg;
MPT_LOCK(mpt);
for (;;) {
if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0
&& mpt->shutdwn_recovery == 0)
mpt_sleep(mpt, mpt, PUSER, "idle", 0);
if (mpt->shutdwn_recovery != 0) {
break;
}
mpt_recover_commands(mpt);
}
mpt->recovery_thread = NULL;
wakeup(&mpt->recovery_thread);
MPT_UNLOCK(mpt);
#if __FreeBSD_version >= 500000
mtx_unlock(&Giant);
#endif
kthread_exit(0);
}
static int
mpt_scsi_send_tmf(struct mpt_softc *mpt, u_int type,
u_int flags, u_int channel, u_int target, u_int lun,
u_int abort_ctx, int sleep_ok)
{
MSG_SCSI_TASK_MGMT *tmf_req;
int error;
/*
* Wait for any current TMF request to complete.
* We're only allowed to issue one TMF at a time.
*/
error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_FREE, REQ_STATE_MASK,
sleep_ok, MPT_TMF_MAX_TIMEOUT);
if (error != 0) {
mpt_reset(mpt, /*reinit*/TRUE);
return (ETIMEDOUT);
}
mpt->tmf_req->state = REQ_STATE_ALLOCATED|REQ_STATE_QUEUED;
TAILQ_INSERT_HEAD(&mpt->request_pending_list, mpt->tmf_req, links);
tmf_req = (MSG_SCSI_TASK_MGMT *)mpt->tmf_req->req_vbuf;
bzero(tmf_req, sizeof(*tmf_req));
tmf_req->TargetID = target;
tmf_req->Bus = channel;
tmf_req->ChainOffset = 0;
tmf_req->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
tmf_req->Reserved = 0;
tmf_req->TaskType = type;
tmf_req->Reserved1 = 0;
tmf_req->MsgFlags = flags;
tmf_req->MsgContext =
htole32(mpt->tmf_req->index | scsi_tmf_handler_id);
bzero(&tmf_req->LUN, sizeof(tmf_req->LUN) + sizeof(tmf_req->Reserved2));
tmf_req->LUN[1] = lun;
tmf_req->TaskMsgContext = abort_ctx;
mpt_lprt(mpt, MPT_PRT_INFO,
"Issuing TMF %p with MsgContext of 0x%x\n", tmf_req,
tmf_req->MsgContext);
if (mpt->verbose > MPT_PRT_DEBUG)
mpt_print_request(tmf_req);
if (mpt->is_fc || mpt->is_sas) {
mpt_send_cmd(mpt, mpt->tmf_req);
error = MPT_OK;
} else {
error = mpt_send_handshake_cmd(mpt, sizeof(*tmf_req), tmf_req);
}
if (error != MPT_OK) {
mpt_reset(mpt, /*reinit*/TRUE);
}
return (error);
}
static void
mpt_fc_add_els(struct mpt_softc *mpt, request_t *req)
{
MSG_LINK_SERVICE_BUFFER_POST_REQUEST *fc;
PTR_SGE_TRANSACTION32 tep;
PTR_SGE_SIMPLE32 se;
bus_addr_t paddr;
paddr = req->req_pbuf;
paddr += MPT_RQSL(mpt);
fc = req->req_vbuf;
memset(fc, 0, MPT_REQUEST_AREA);
fc->BufferCount = 1;
fc->Function = MPI_FUNCTION_FC_LINK_SRVC_BUF_POST;
fc->MsgContext = htole32(req->index | fc_els_handler_id);
/*
* Okay, set up ELS buffer pointers. ELS buffer pointers
* consist of a TE SGL element (with details length of zero)
* followe by a SIMPLE SGL element which holds the address
* of the buffer.
*/
tep = (PTR_SGE_TRANSACTION32) &fc->SGL;
tep->ContextSize = 4;
tep->Flags = 0;
tep->TransactionContext[0] = htole32(req->index | fc_els_handler_id);
se = (PTR_SGE_SIMPLE32) &tep->TransactionDetails[0];
se->FlagsLength =
MPI_SGE_FLAGS_HOST_TO_IOC |
MPI_SGE_FLAGS_SIMPLE_ELEMENT |
MPI_SGE_FLAGS_LAST_ELEMENT |
MPI_SGE_FLAGS_END_OF_LIST |
MPI_SGE_FLAGS_END_OF_BUFFER;
se->FlagsLength <<= MPI_SGE_FLAGS_SHIFT;
se->FlagsLength |= (MPT_NRFM(mpt) - MPT_RQSL(mpt));
se->Address = (uint32_t) paddr;
mpt_check_doorbell(mpt);
mpt_send_cmd(mpt, req);
}
static void
mpt_post_target_command(struct mpt_softc *mpt, request_t *req, int ioindex)
{
PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST fc;
PTR_CMD_BUFFER_DESCRIPTOR cb;
bus_addr_t paddr;
paddr = req->req_pbuf;
paddr += MPT_RQSL(mpt);
memset(req->req_vbuf, 0, MPT_REQUEST_AREA);
fc = req->req_vbuf;
fc->BufferCount = 1;
fc->Function = MPI_FUNCTION_TARGET_CMD_BUFFER_POST;
fc->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
cb = &fc->Buffer[0];
cb->IoIndex = htole16(ioindex);
cb->u.PhysicalAddress32 = (U32) paddr;
mpt_check_doorbell(mpt);
mpt_send_cmd(mpt, req);
}
static void
mpt_add_target_commands(struct mpt_softc *mpt)
{
int i, max;
if (mpt->tgt_cmd_ptrs) {
return;
}
max = MPT_MAX_REQUESTS(mpt) >> 1;
if (max > mpt->mpt_max_tgtcmds) {
max = mpt->mpt_max_tgtcmds;
}
mpt->tgt_cmd_ptrs =
malloc(max * sizeof (void *), M_DEVBUF, M_NOWAIT | M_ZERO);
if (mpt->tgt_cmd_ptrs == NULL) {
mpt_prt(mpt, "could not allocate cmdptrs\n");
return;
}
mpt->tgt_cmds_allocated = max;
for (i = 0; i < max; i++) {
request_t *req;
req = mpt_get_request(mpt, FALSE);
if (req == NULL) {
break;
}
mpt->tgt_cmd_ptrs[i] = req;
mpt_post_target_command(mpt, req, i);
}
if (i == 0) {
mpt_lprt(mpt, MPT_PRT_ERROR, "could not add any target bufs\n");
free(mpt->tgt_cmd_ptrs, M_DEVBUF);
mpt->tgt_cmd_ptrs = NULL;
mpt->tgt_cmds_allocated = 0;
} else if (i < max) {
mpt_lprt(mpt, MPT_PRT_WARN, "added %d of %d target bufs\n",
i, max);
}
}
static int
mpt_enable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun)
{
if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) {
mpt->twildcard = 1;
} else if (lun >= MPT_MAX_LUNS) {
return (EINVAL);
} else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) {
return (EINVAL);
}
if (mpt->tenabled == 0) {
#if 0
if (mpt->is_fc) {
(void) mpt_fc_reset_link(mpt, 0);
}
#endif
mpt->tenabled = 1;
}
if (lun == CAM_LUN_WILDCARD) {
mpt->trt_wildcard.enabled = 1;
} else {
mpt->trt[lun].enabled = 1;
}
return (0);
}
static int
mpt_disable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun)
{
int i;
if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) {
mpt->twildcard = 0;
} else if (lun >= MPT_MAX_LUNS) {
return (EINVAL);
} else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) {
return (EINVAL);
}
if (lun == CAM_LUN_WILDCARD) {
mpt->trt_wildcard.enabled = 0;
} else {
mpt->trt[lun].enabled = 0;
}
for (i = 0; i < MPT_MAX_LUNS; i++) {
if (mpt->trt[lun].enabled) {
break;
}
}
if (i == MPT_MAX_LUNS && mpt->twildcard == 0) {
mpt->tenabled = 0;
#if 0
if (mpt->is_fc) {
(void) mpt_fc_reset_link(mpt, 0);
}
#endif
}
return (0);
}
/*
* Called with MPT lock held
*/
static void
mpt_target_start_io(struct mpt_softc *mpt, union ccb *ccb)
{
struct ccb_scsiio *csio = &ccb->csio;
request_t *cmd_req = MPT_TAG_2_REQ(mpt, csio->tag_id);
mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req);
if (tgt->state != TGT_STATE_IN_CAM) {
mpt_prt(mpt, "tag 0x%08x in state %x when starting I/O\n",
csio->tag_id, tgt->state);
mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
return;
}
if (csio->dxfer_len) {
bus_dmamap_callback_t *cb;
PTR_MSG_TARGET_ASSIST_REQUEST ta;
request_t *req;
KASSERT((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE,
("dxfer_len %u but direction is NONE\n", csio->dxfer_len));
req = mpt_get_request(mpt, FALSE);
if (req == NULL) {
mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
return;
}
ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG;
if (sizeof (bus_addr_t) > 4) {
cb = mpt_execute_req_a64;
} else {
cb = mpt_execute_req;
}
req->ccb = ccb;
ccb->ccb_h.ccb_req_ptr = req;
/*
* Record the currently active ccb and the
* request for it in our target state area.
*/
tgt->ccb = ccb;
tgt->req = req;
memset(req->req_vbuf, 0, MPT_RQSL(mpt));
ta = req->req_vbuf;
if (mpt->is_fc) {
;
} else if (mpt->is_sas == 0) {
PTR_MPI_TARGET_SSP_CMD_BUFFER ssp =
cmd_req->req_vbuf;
ta->QueueTag = ssp->InitiatorTag;
} else {
PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp =
cmd_req->req_vbuf;
ta->QueueTag = sp->Tag;
}
ta->Function = MPI_FUNCTION_TARGET_ASSIST;
ta->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
ta->ReplyWord = htole32(tgt->reply_desc);
if (csio->ccb_h.target_lun > 256) {
ta->LUN[0] =
0x40 | ((csio->ccb_h.target_lun >> 8) & 0x3f);
ta->LUN[1] = csio->ccb_h.target_lun & 0xff;
} else {
ta->LUN[1] = csio->ccb_h.target_lun;
}
ta->RelativeOffset = tgt->bytes_xfered;
ta->DataLength = ccb->csio.dxfer_len;
if (ta->DataLength > tgt->resid) {
ta->DataLength = tgt->resid;
}
/*
* XXX Should be done after data transfer completes?
*/
tgt->resid -= csio->dxfer_len;
tgt->bytes_xfered += csio->dxfer_len;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
ta->TargetAssistFlags |=
TARGET_ASSIST_FLAGS_DATA_DIRECTION;
}
#ifdef WE_TRUST_AUTO_GOOD_STATUS
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) &&
csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) {
ta->TargetAssistFlags |=
TARGET_ASSIST_FLAGS_AUTO_STATUS;
}
#endif
tgt->state = TGT_STATE_SETTING_UP_FOR_DATA;
mpt_lprt(mpt, MPT_PRT_DEBUG,
"DATA_CCB %p tag %x %u bytes %u resid flg %x req %p:%u "
"nxtstate=%d\n", csio, csio->tag_id, csio->dxfer_len,
tgt->resid, ccb->ccb_h.flags, req, req->serno, tgt->state);
MPTLOCK_2_CAMLOCK(mpt);
if ((ccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
if ((ccb->ccb_h.flags & CAM_DATA_PHYS) == 0) {
int error;
int s = splsoftvm();
error = bus_dmamap_load(mpt->buffer_dmat,
req->dmap, csio->data_ptr, csio->dxfer_len,
cb, req, 0);
splx(s);
if (error == EINPROGRESS) {
xpt_freeze_simq(mpt->sim, 1);
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
}
} else {
/*
* We have been given a pointer to single
* physical buffer.
*/
struct bus_dma_segment seg;
seg.ds_addr = (bus_addr_t)
(vm_offset_t)csio->data_ptr;
seg.ds_len = csio->dxfer_len;
(*cb)(req, &seg, 1, 0);
}
} else {
/*
* We have been given a list of addresses.
* This case could be easily supported but they are not
* currently generated by the CAM subsystem so there
* is no point in wasting the time right now.
*/
struct bus_dma_segment *sgs;
if ((ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
(*cb)(req, NULL, 0, EFAULT);
} else {
/* Just use the segments provided */
sgs = (struct bus_dma_segment *)csio->data_ptr;
(*cb)(req, sgs, csio->sglist_cnt, 0);
}
}
CAMLOCK_2_MPTLOCK(mpt);
} else {
uint8_t *sp = NULL, sense[MPT_SENSE_SIZE];
/*
* XXX: I don't know why this seems to happen, but
* XXX: completing the CCB seems to make things happy.
* XXX: This seems to happen if the initiator requests
* XXX: enough data that we have to do multiple CTIOs.
*/
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) {
mpt_lprt(mpt, MPT_PRT_DEBUG,
"Meaningless STATUS CCB (%p): flags %x status %x "
"resid %d bytes_xfered %u\n", ccb, ccb->ccb_h.flags,
ccb->ccb_h.status, tgt->resid, tgt->bytes_xfered);
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
tgt->flags |= BOGUS_JO;
MPTLOCK_2_CAMLOCK(mpt);
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
return;
}
if (ccb->ccb_h.flags & CAM_SEND_SENSE) {
sp = sense;
memcpy(sp, &csio->sense_data,
min(csio->sense_len, MPT_SENSE_SIZE));
}
mpt_scsi_tgt_status(mpt, ccb, cmd_req, csio->scsi_status, sp);
}
}
/*
* Abort queued up CCBs
*/
static cam_status
mpt_abort_target_ccb(struct mpt_softc *mpt, union ccb *ccb)
{
struct mpt_hdr_stailq *lp;
struct ccb_hdr *srch;
int found = 0;
union ccb *accb = ccb->cab.abort_ccb;
tgt_resource_t *trtp;
mpt_lprt(mpt, MPT_PRT_DEBUG, "aborting ccb %p\n", accb);
if (ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
trtp = &mpt->trt_wildcard;
} else {
trtp = &mpt->trt[ccb->ccb_h.target_lun];
}
if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
lp = &trtp->atios;
} else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
lp = &trtp->inots;
} else {
return (CAM_REQ_INVALID);
}
STAILQ_FOREACH(srch, lp, sim_links.stqe) {
if (srch == &accb->ccb_h) {
found = 1;
STAILQ_REMOVE(lp, srch, ccb_hdr, sim_links.stqe);
break;
}
}
if (found) {
accb->ccb_h.status = CAM_REQ_ABORTED;
xpt_done(accb);
return (CAM_REQ_CMP);
}
mpt_prt(mpt, "mpt_abort_tgt_ccb: CCB %p not found\n", ccb);
return (CAM_PATH_INVALID);
}
/*
* Ask the MPT to abort the current target command
*/
static cam_status
mpt_abort_target_cmd(struct mpt_softc *mpt, request_t *cmd_req)
{
int error;
request_t *req;
PTR_MSG_TARGET_MODE_ABORT abtp;
req = mpt_get_request(mpt, FALSE);
if (req == NULL) {
return (CAM_RESRC_UNAVAIL);
}
abtp = req->req_vbuf;
memset(abtp, 0, sizeof (*abtp));
abtp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
abtp->AbortType = TARGET_MODE_ABORT_TYPE_EXACT_IO;
abtp->Function = MPI_FUNCTION_TARGET_MODE_ABORT;
abtp->ReplyWord = htole32(MPT_TGT_STATE(mpt, cmd_req)->reply_desc);
if (mpt->is_fc || mpt->is_sas) {
mpt_send_cmd(mpt, req);
} else {
error = mpt_send_handshake_cmd(mpt, sizeof(*req), req);
}
return (CAM_REQ_INPROG);
}
/*
* When a command times out, it is placed on the requeust_timeout_list
* and we wake our recovery thread. The MPT-Fusion architecture supports
* only a single TMF operation at a time, so we serially abort/bdr, etc,
* the timedout transactions. The next TMF is issued either by the
* completion handler of the current TMF waking our recovery thread,
* or the TMF timeout handler causing a hard reset sequence.
*/
static void
mpt_recover_commands(struct mpt_softc *mpt)
{
request_t *req;
union ccb *ccb;
int error;
if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) {
/*
* No work to do- leave.
*/
mpt_prt(mpt, "mpt_recover_commands: no requests.\n");
return;
}
/*
* Flush any commands whose completion coincides with their timeout.
*/
mpt_intr(mpt);
if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) {
/*
* The timedout commands have already
* completed. This typically means
* that either the timeout value was on
* the hairy edge of what the device
* requires or - more likely - interrupts
* are not happening.
*/
mpt_prt(mpt, "Timedout requests already complete. "
"Interrupts may not be functioning.\n");
mpt_enable_ints(mpt);
return;
}
/*
* We have no visibility into the current state of the
* controller, so attempt to abort the commands in the
* order they timed-out.
*/
while ((req = TAILQ_FIRST(&mpt->request_timeout_list)) != NULL) {
u_int status;
mpt_prt(mpt, "Attempting to Abort Req %p\n", req);
ccb = req->ccb;
mpt_set_ccb_status(ccb, CAM_CMD_TIMEOUT);
error = mpt_scsi_send_tmf(mpt,
MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
/*MsgFlags*/0, /*Bus*/0, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun,
htole32(req->index | scsi_io_handler_id), /*sleep_ok*/TRUE);
if (error != 0) {
/*
* mpt_scsi_send_tmf hard resets on failure, so no
* need to do so here. Our queue should be emptied
* by the hard reset.
*/
continue;
}
error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE,
REQ_STATE_DONE, /*sleep_ok*/TRUE, /*time_ms*/500);
status = mpt->tmf_req->IOCStatus;
if (error != 0) {
/*
* If we've errored out and the transaction is still
* pending, reset the controller.
*/
mpt_prt(mpt, "mpt_recover_commands: Abort timed-out. "
"Resetting controller\n");
mpt_reset(mpt, /*reinit*/TRUE);
continue;
}
/*
* TMF is complete.
*/
TAILQ_REMOVE(&mpt->request_timeout_list, req, links);
mpt->tmf_req->state = REQ_STATE_FREE;
if ((status & MPI_IOCSTATUS_MASK) == MPI_SCSI_STATUS_SUCCESS)
continue;
mpt_lprt(mpt, MPT_PRT_DEBUG,
"mpt_recover_commands: Abort Failed "
"with status 0x%x\n. Resetting bus", status);
/*
* If the abort attempt fails for any reason, reset the bus.
* We should find all of the timed-out commands on our
* list are in the done state after this completes.
*/
mpt_bus_reset(mpt, /*sleep_ok*/TRUE);
}
}