freebsd-nq/sys/i386/include/ultrasound.h
Andrey A. Chernov 4a8e05dd59 Move soundcard.h & ultrasound.h to proper location <machine/...>
to allow application access it.
1993-11-27 22:16:44 +00:00

125 lines
5.4 KiB
C

#ifndef _ULTRASOUND_H_
#define _ULTRASOUND_H_
/*
* Copyright by Hannu Savolainen 1993
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* ultrasound.h - Macros for programming the Gravis Ultrasound
* These macros are extremely device dependent
* and not portable.
*/
#ifdef linux
#include <linux/soundcard.h>
#else
#include <machine/soundcard.h>
#endif
/*
* Private events for Gravis Ultrasound (GUS)
*
* Format:
* byte 0 - SEQ_PRIVATE (0xfe)
* byte 1 - Synthesizer device number (0-N)
* byte 2 - Command (see below)
* byte 3 - Voice number (0-31)
* bytes 4 and 5 - parameter P1 (unsigned short)
* bytes 6 and 7 - parameter P2 (unsigned short)
*
* Commands:
* Each command affects one voice defined in byte 3.
* Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
* _GUS_NUMVOICES - Sets max. number of concurrent voices (P1=14-31, default 16)
* _GUS_VOICESAMPLE- ************ OBSOLETE *************
* _GUS_VOICEON - Starts voice (P1=voice mode)
* _GUS_VOICEOFF - Stops voice (no parameters)
* _GUS_VOICEFADE - Stops the voice smoothly.
* _GUS_VOICEMODE - Alters the voice mode, don't start or stop voice (P1=voice mode)
* _GUS_VOICEBALA - Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
* _GUS_VOICEFREQ - Sets voice (sample) playback frequency (P1=Hz)
* _GUS_VOICEVOL - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
* _GUS_VOICEVOL2 - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
* (Like GUS_VOICEVOL but doesn't change the hw
* volume. It just updates volume in the voice table).
*
* _GUS_RAMPRANGE - Sets limits for volume ramping (P1=low volume, P2=high volume)
* _GUS_RAMPRATE - Sets the speed for volume ramping (P1=scale, P2=rate)
* _GUS_RAMPMODE - Sets the volume ramping mode (P1=ramping mode)
* _GUS_RAMPON - Starts volume ramping (no parameters)
* _GUS_RAMPOFF - Stops volume ramping (no parameters)
* _GUS_VOLUME_SCALE - Changes the volume calculation constants
* for all voices.
*/
#define _GUS_NUMVOICES 0x00
#define _GUS_VOICESAMPLE 0x01 /* OBSOLETE */
#define _GUS_VOICEON 0x02
#define _GUS_VOICEOFF 0x03
#define _GUS_VOICEMODE 0x04
#define _GUS_VOICEBALA 0x05
#define _GUS_VOICEFREQ 0x06
#define _GUS_VOICEVOL 0x07
#define _GUS_RAMPRANGE 0x08
#define _GUS_RAMPRATE 0x09
#define _GUS_RAMPMODE 0x0a
#define _GUS_RAMPON 0x0b
#define _GUS_RAMPOFF 0x0c
#define _GUS_VOICEFADE 0x0d
#define _GUS_VOLUME_SCALE 0x0e
#define _GUS_VOICEVOL2 0x0f
/*
* GUS API macros
*/
#define _GUS_CMD(chn, voice, cmd, p1, p2) \
{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
_seqbuf[_seqbufptr+3] = voice;\
*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
_SEQ_ADVBUF(8);}
#define GUS_NUMVOICES(chn, p1) _GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
#define GUS_VOICESAMPLE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0) /* OBSOLETE */
#define GUS_VOICEON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
#define GUS_VOICEOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
#define GUS_VOICEFADE(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
#define GUS_VOICEMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
#define GUS_VOICEBALA(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
#define GUS_VOICEFREQ(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
(p) & 0xffff, ((p) >> 16) & 0xffff)
#define GUS_VOICEVOL(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
#define GUS_VOICEVOL2(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
#define GUS_RAMPRANGE(chn, voice, low, high) _GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
#define GUS_RAMPRATE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
#define GUS_RAMPMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
#define GUS_RAMPON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
#define GUS_RAMPOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
#define GUS_VOLUME_SCALE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
#endif