freebsd-skq/lib/libipsec/pfkey_dump.c

658 lines
16 KiB
C
Raw Permalink Normal View History

/* $KAME: pfkey_dump.c,v 1.45 2003/09/08 10:14:56 itojun Exp $ */
/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2001-09-30 21:43:45 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/param.h>
#include <sys/socket.h>
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
#include <net/if.h>
#include <net/pfkeyv2.h>
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
#include <netipsec/ipsec.h>
#include <netipsec/key_var.h>
#include <netipsec/key_debug.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <string.h>
#include <time.h>
#include <netdb.h>
#include "ipsec_strerror.h"
#include "libpfkey.h"
/* cope with old kame headers - ugly */
#ifndef SADB_X_AALG_NULL
#define SADB_X_AALG_NULL SADB_AALG_NULL
#endif
#ifndef SADB_X_EALG_RC5CBC
#ifdef SADB_EALG_RC5CBC
#define SADB_X_EALG_RC5CBC SADB_EALG_RC5CBC
#endif
#endif
#define GETMSGSTR(str, num) \
do { \
if (sizeof((str)[0]) == 0 \
|| num >= sizeof(str)/sizeof((str)[0])) \
printf("%u ", (num)); \
else if (strlen((str)[(num)]) == 0) \
printf("%u ", (num)); \
else \
printf("%s ", (str)[(num)]); \
} while (0)
#define GETMSGV2S(v2s, num) \
do { \
struct val2str *p; \
for (p = (v2s); p && p->str; p++) { \
if (p->val == (num)) \
break; \
} \
if (p && p->str) \
printf("%s ", p->str); \
else \
printf("%u ", (num)); \
} while (0)
2002-03-21 23:54:04 +00:00
static char *str_ipaddr(struct sockaddr *);
static char *str_prefport(u_int, u_int, u_int, u_int);
static void str_upperspec(u_int, u_int, u_int);
2002-03-21 23:54:04 +00:00
static char *str_time(time_t);
static void str_lifetime_byte(struct sadb_lifetime *, char *);
struct val2str {
int val;
const char *str;
};
/*
* Must to be re-written about following strings.
*/
static char *str_satype[] = {
"unspec",
"unknown",
"ah",
"esp",
"unknown",
"rsvp",
"ospfv2",
"ripv2",
"mip",
"ipcomp",
"policy",
"tcp"
};
static char *str_mode[] = {
"any",
"transport",
"tunnel",
};
static char *str_state[] = {
"larval",
"mature",
"dying",
"dead",
};
static struct val2str str_alg_auth[] = {
{ SADB_AALG_NONE, "none", },
{ SADB_AALG_SHA1HMAC, "hmac-sha1", },
{ SADB_X_AALG_NULL, "null", },
{ SADB_X_AALG_TCP_MD5, "tcp-md5", },
#ifdef SADB_X_AALG_SHA2_256
{ SADB_X_AALG_SHA2_256, "hmac-sha2-256", },
#endif
#ifdef SADB_X_AALG_SHA2_384
{ SADB_X_AALG_SHA2_384, "hmac-sha2-384", },
#endif
#ifdef SADB_X_AALG_SHA2_512
{ SADB_X_AALG_SHA2_512, "hmac-sha2-512", },
#endif
#ifdef SADB_X_AALG_AES_XCBC_MAC
{ SADB_X_AALG_AES_XCBC_MAC, "aes-xcbc-mac", },
#endif
{ -1, NULL, },
};
static struct val2str str_alg_enc[] = {
{ SADB_EALG_NONE, "none", },
{ SADB_EALG_NULL, "null", },
#ifdef SADB_X_EALG_RC5CBC
{ SADB_X_EALG_RC5CBC, "rc5-cbc", },
#endif
#ifdef SADB_X_EALG_AESCBC
{ SADB_X_EALG_AESCBC, "aes-cbc", },
#endif
#ifdef SADB_X_EALG_TWOFISHCBC
{ SADB_X_EALG_TWOFISHCBC, "twofish-cbc", },
#endif
#ifdef SADB_X_EALG_AESCTR
{ SADB_X_EALG_AESCTR, "aes-ctr", },
#endif
#ifdef SADB_X_EALG_AESGCM16
{ SADB_X_EALG_AESGCM16, "aes-gcm-16", },
#endif
{ -1, NULL, },
};
static struct val2str str_alg_comp[] = {
{ SADB_X_CALG_NONE, "none", },
{ SADB_X_CALG_OUI, "oui", },
{ SADB_X_CALG_DEFLATE, "deflate", },
{ SADB_X_CALG_LZS, "lzs", },
{ -1, NULL, },
};
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
static struct val2str str_sp_scope[] = {
{ IPSEC_POLICYSCOPE_GLOBAL, "global" },
{ IPSEC_POLICYSCOPE_IFNET, "ifnet" },
{ IPSEC_POLICYSCOPE_PCB, "pcb"},
{ -1, NULL },
};
/*
* dump SADB_MSG formated. For debugging, you should use kdebug_sadb().
*/
void
pfkey_sadump(m)
struct sadb_msg *m;
{
caddr_t mhp[SADB_EXT_MAX + 1];
struct sadb_sa *m_sa;
struct sadb_x_sa2 *m_sa2;
struct sadb_lifetime *m_lftc, *m_lfth, *m_lfts;
struct sadb_address *m_saddr, *m_daddr, *m_paddr;
struct sadb_key *m_auth, *m_enc;
struct sadb_ident *m_sid, *m_did;
struct sadb_sens *m_sens;
struct sadb_x_sa_replay *m_sa_replay;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct sadb_x_nat_t_type *natt_type;
struct sadb_x_nat_t_port *natt_sport, *natt_dport;
struct sadb_address *natt_oai, *natt_oar;
/* check pfkey message. */
if (pfkey_align(m, mhp)) {
printf("%s\n", ipsec_strerror());
return;
}
if (pfkey_check(mhp)) {
printf("%s\n", ipsec_strerror());
return;
}
m_sa = (struct sadb_sa *)mhp[SADB_EXT_SA];
m_sa2 = (struct sadb_x_sa2 *)mhp[SADB_X_EXT_SA2];
m_lftc = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_CURRENT];
m_lfth = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_HARD];
m_lfts = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_SOFT];
m_saddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_SRC];
m_daddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_DST];
m_paddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_PROXY];
m_auth = (struct sadb_key *)mhp[SADB_EXT_KEY_AUTH];
m_enc = (struct sadb_key *)mhp[SADB_EXT_KEY_ENCRYPT];
m_sid = (struct sadb_ident *)mhp[SADB_EXT_IDENTITY_SRC];
m_did = (struct sadb_ident *)mhp[SADB_EXT_IDENTITY_DST];
m_sens = (struct sadb_sens *)mhp[SADB_EXT_SENSITIVITY];
m_sa_replay = (struct sadb_x_sa_replay *)mhp[SADB_X_EXT_SA_REPLAY];
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
natt_type = (struct sadb_x_nat_t_type *)mhp[SADB_X_EXT_NAT_T_TYPE];
natt_sport = (struct sadb_x_nat_t_port *)mhp[SADB_X_EXT_NAT_T_SPORT];
natt_dport = (struct sadb_x_nat_t_port *)mhp[SADB_X_EXT_NAT_T_DPORT];
natt_oai = (struct sadb_address *)mhp[SADB_X_EXT_NAT_T_OAI];
natt_oar = (struct sadb_address *)mhp[SADB_X_EXT_NAT_T_OAR];
/* source address */
if (m_saddr == NULL) {
printf("no ADDRESS_SRC extension.\n");
return;
}
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
printf("%s", str_ipaddr((struct sockaddr *)(m_saddr + 1)));
if (natt_type != NULL && natt_sport != NULL)
printf("[%u]", ntohs(natt_sport->sadb_x_nat_t_port_port));
/* destination address */
if (m_daddr == NULL) {
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
printf("\nno ADDRESS_DST extension.\n");
return;
}
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
printf(" %s", str_ipaddr((struct sockaddr *)(m_daddr + 1)));
if (natt_type != NULL && natt_dport != NULL)
printf("[%u]", ntohs(natt_dport->sadb_x_nat_t_port_port));
/* SA type */
if (m_sa == NULL) {
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
printf("\nno SA extension.\n");
return;
}
if (m_sa2 == NULL) {
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
printf("\nno SA2 extension.\n");
return;
}
printf("\n\t");
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
if (m->sadb_msg_satype == SADB_SATYPE_ESP && natt_type != NULL)
printf("esp-udp ");
else
GETMSGSTR(str_satype, m->sadb_msg_satype);
printf("mode=");
GETMSGSTR(str_mode, m_sa2->sadb_x_sa2_mode);
printf("spi=%u(0x%08x) reqid=%u(0x%08x)\n",
(u_int32_t)ntohl(m_sa->sadb_sa_spi),
(u_int32_t)ntohl(m_sa->sadb_sa_spi),
(u_int32_t)m_sa2->sadb_x_sa2_reqid,
(u_int32_t)m_sa2->sadb_x_sa2_reqid);
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
/* other NAT-T information */
if (natt_type != NULL && (natt_oai != NULL || natt_oar != NULL)) {
printf("\tNAT:");
if (natt_oai != NULL)
printf(" OAI=%s",
str_ipaddr((struct sockaddr *)(natt_oai + 1)));
if (natt_oar != NULL)
printf(" OAR=%s",
str_ipaddr((struct sockaddr *)(natt_oar + 1)));
printf("\n");
}
/* encryption key */
if (m->sadb_msg_satype == SADB_X_SATYPE_IPCOMP) {
printf("\tC: ");
GETMSGV2S(str_alg_comp, m_sa->sadb_sa_encrypt);
} else if (m->sadb_msg_satype == SADB_SATYPE_ESP) {
if (m_enc != NULL) {
printf("\tE: ");
GETMSGV2S(str_alg_enc, m_sa->sadb_sa_encrypt);
ipsec_hexdump((caddr_t)m_enc + sizeof(*m_enc),
m_enc->sadb_key_bits / 8);
printf("\n");
}
}
/* authentication key */
if (m_auth != NULL) {
printf("\tA: ");
GETMSGV2S(str_alg_auth, m_sa->sadb_sa_auth);
ipsec_hexdump((caddr_t)m_auth + sizeof(*m_auth),
m_auth->sadb_key_bits / 8);
printf("\n");
}
/* replay windoe size & flags */
printf("\tseq=0x%08x replay=%u flags=0x%08x ",
m_sa2->sadb_x_sa2_sequence,
m_sa_replay ? (m_sa_replay->sadb_x_sa_replay_replay >> 3) :
m_sa->sadb_sa_replay,
m_sa->sadb_sa_flags);
/* state */
printf("state=");
GETMSGSTR(str_state, m_sa->sadb_sa_state);
printf("\n");
/* lifetime */
if (m_lftc != NULL) {
time_t tmp_time = time(0);
printf("\tcreated: %s",
str_time(m_lftc->sadb_lifetime_addtime));
printf("\tcurrent: %s\n", str_time(tmp_time));
printf("\tdiff: %lu(s)",
(u_long)(m_lftc->sadb_lifetime_addtime == 0 ?
0 : (tmp_time - m_lftc->sadb_lifetime_addtime)));
printf("\thard: %lu(s)",
(u_long)(m_lfth == NULL ?
0 : m_lfth->sadb_lifetime_addtime));
printf("\tsoft: %lu(s)\n",
(u_long)(m_lfts == NULL ?
0 : m_lfts->sadb_lifetime_addtime));
printf("\tlast: %s",
str_time(m_lftc->sadb_lifetime_usetime));
printf("\thard: %lu(s)",
(u_long)(m_lfth == NULL ?
0 : m_lfth->sadb_lifetime_usetime));
printf("\tsoft: %lu(s)\n",
(u_long)(m_lfts == NULL ?
0 : m_lfts->sadb_lifetime_usetime));
str_lifetime_byte(m_lftc, "current");
str_lifetime_byte(m_lfth, "hard");
str_lifetime_byte(m_lfts, "soft");
printf("\n");
printf("\tallocated: %lu",
(unsigned long)m_lftc->sadb_lifetime_allocations);
printf("\thard: %lu",
(u_long)(m_lfth == NULL ?
0 : m_lfth->sadb_lifetime_allocations));
printf("\tsoft: %lu\n",
(u_long)(m_lfts == NULL ?
0 : m_lfts->sadb_lifetime_allocations));
}
printf("\tsadb_seq=%lu pid=%lu ",
(u_long)m->sadb_msg_seq,
(u_long)m->sadb_msg_pid);
/* XXX DEBUG */
printf("refcnt=%u\n", m->sadb_msg_reserved);
return;
}
void
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
pfkey_spdump(struct sadb_msg *m)
{
char pbuf[NI_MAXSERV];
caddr_t mhp[SADB_EXT_MAX + 1];
struct sadb_address *m_saddr, *m_daddr;
struct sadb_x_policy *m_xpl;
struct sadb_lifetime *m_lftc = NULL, *m_lfth = NULL;
struct sockaddr *sa;
u_int16_t sport = 0, dport = 0;
/* check pfkey message. */
if (pfkey_align(m, mhp)) {
printf("%s\n", ipsec_strerror());
return;
}
if (pfkey_check(mhp)) {
printf("%s\n", ipsec_strerror());
return;
}
m_saddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_SRC];
m_daddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_DST];
m_xpl = (struct sadb_x_policy *)mhp[SADB_X_EXT_POLICY];
m_lftc = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_CURRENT];
m_lfth = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_HARD];
if (m_saddr && m_daddr) {
/* source address */
sa = (struct sockaddr *)(m_saddr + 1);
switch (sa->sa_family) {
case AF_INET:
case AF_INET6:
if (getnameinfo(sa, sa->sa_len, NULL, 0,
pbuf, sizeof(pbuf), NI_NUMERICSERV) != 0)
sport = 0; /*XXX*/
else
sport = atoi(pbuf);
printf("%s%s ", str_ipaddr(sa),
str_prefport(sa->sa_family,
m_saddr->sadb_address_prefixlen, sport,
m_saddr->sadb_address_proto));
break;
default:
printf("unknown-af ");
break;
}
/* destination address */
sa = (struct sockaddr *)(m_daddr + 1);
switch (sa->sa_family) {
case AF_INET:
case AF_INET6:
if (getnameinfo(sa, sa->sa_len, NULL, 0,
pbuf, sizeof(pbuf), NI_NUMERICSERV) != 0)
dport = 0; /*XXX*/
else
dport = atoi(pbuf);
printf("%s%s ", str_ipaddr(sa),
str_prefport(sa->sa_family,
m_daddr->sadb_address_prefixlen, dport,
m_saddr->sadb_address_proto));
break;
default:
printf("unknown-af ");
break;
}
/* upper layer protocol */
if (m_saddr->sadb_address_proto !=
m_daddr->sadb_address_proto) {
printf("upper layer protocol mismatched.\n");
return;
}
str_upperspec(m_saddr->sadb_address_proto, sport, dport);
}
else
printf("(no selector, probably per-socket policy) ");
/* policy */
{
char *d_xpl;
if (m_xpl == NULL) {
printf("no X_POLICY extension.\n");
return;
}
d_xpl = ipsec_dump_policy((char *)m_xpl, "\n\t");
/* dump SPD */
printf("\n\t%s\n", d_xpl);
free(d_xpl);
}
/* lifetime */
if (m_lftc) {
printf("\tcreated: %s ",
str_time(m_lftc->sadb_lifetime_addtime));
printf("lastused: %s\n",
str_time(m_lftc->sadb_lifetime_usetime));
}
if (m_lfth) {
printf("\tlifetime: %lu(s) ",
(u_long)m_lfth->sadb_lifetime_addtime);
printf("validtime: %lu(s)\n",
(u_long)m_lfth->sadb_lifetime_usetime);
}
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
printf("\tspid=%ld seq=%ld pid=%ld scope=",
(u_long)m_xpl->sadb_x_policy_id,
(u_long)m->sadb_msg_seq,
(u_long)m->sadb_msg_pid);
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
GETMSGV2S(str_sp_scope, m_xpl->sadb_x_policy_scope);
if (m_xpl->sadb_x_policy_scope == IPSEC_POLICYSCOPE_IFNET &&
if_indextoname(m_xpl->sadb_x_policy_ifindex, pbuf) != NULL)
printf("ifname=%s", pbuf);
printf("\n");
/* XXX TEST */
printf("\trefcnt=%u\n", m->sadb_msg_reserved);
return;
}
/*
* set "ipaddress" to buffer.
*/
static char *
str_ipaddr(sa)
struct sockaddr *sa;
{
static char buf[NI_MAXHOST];
const int niflag = NI_NUMERICHOST;
if (sa == NULL)
return "";
if (getnameinfo(sa, sa->sa_len, buf, sizeof(buf), NULL, 0, niflag) == 0)
return buf;
return NULL;
}
/*
* set "/prefix[port number]" to buffer.
*/
static char *
str_prefport(family, pref, port, ulp)
u_int family, pref, port, ulp;
{
static char buf[128];
char prefbuf[128];
char portbuf[128];
int plen;
switch (family) {
case AF_INET:
plen = sizeof(struct in_addr) << 3;
break;
case AF_INET6:
plen = sizeof(struct in6_addr) << 3;
break;
default:
return "?";
}
if (pref == plen)
prefbuf[0] = '\0';
else
snprintf(prefbuf, sizeof(prefbuf), "/%u", pref);
if (ulp == IPPROTO_ICMPV6)
memset(portbuf, 0, sizeof(portbuf));
else {
if (port == IPSEC_PORT_ANY)
snprintf(portbuf, sizeof(portbuf), "[%s]", "any");
else
snprintf(portbuf, sizeof(portbuf), "[%u]", port);
}
snprintf(buf, sizeof(buf), "%s%s", prefbuf, portbuf);
return buf;
}
static void
str_upperspec(ulp, p1, p2)
u_int ulp, p1, p2;
{
if (ulp == IPSEC_ULPROTO_ANY)
printf("any");
else if (ulp == IPPROTO_ICMPV6) {
printf("icmp6");
if (!(p1 == IPSEC_PORT_ANY && p2 == IPSEC_PORT_ANY))
printf(" %u,%u", p1, p2);
} else {
struct protoent *ent;
switch (ulp) {
case IPPROTO_IPV4:
printf("ip4");
break;
default:
ent = getprotobynumber(ulp);
if (ent)
printf("%s", ent->p_name);
else
printf("%u", ulp);
endprotoent();
break;
}
}
}
/*
* set "Mon Day Time Year" to buffer
*/
static char *
str_time(t)
time_t t;
{
static char buf[128];
if (t == 0) {
int i = 0;
for (;i < 20;) buf[i++] = ' ';
} else {
char *t0;
t0 = ctime(&t);
memcpy(buf, t0 + 4, 20);
}
buf[20] = '\0';
return(buf);
}
static void
str_lifetime_byte(x, str)
struct sadb_lifetime *x;
char *str;
{
double y;
char *unit;
int w;
if (x == NULL) {
printf("\t%s: 0(bytes)", str);
return;
}
#if 0
if ((x->sadb_lifetime_bytes) / 1024 / 1024) {
y = (x->sadb_lifetime_bytes) * 1.0 / 1024 / 1024;
unit = "M";
w = 1;
} else if ((x->sadb_lifetime_bytes) / 1024) {
y = (x->sadb_lifetime_bytes) * 1.0 / 1024;
unit = "K";
w = 1;
} else {
y = (x->sadb_lifetime_bytes) * 1.0;
unit = "";
w = 0;
}
#else
y = (x->sadb_lifetime_bytes) * 1.0;
unit = "";
w = 0;
#endif
printf("\t%s: %.*f(%sbytes)", str, w, y, unit);
}