d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
freebsd-skq/lib/libufs/Makefile

39 lines
875 B
Makefile
Raw Permalink Normal View History

Add libufs, a library for dealing with UFS filesystems from userland to the build. It is here to compartmentalise functionality currently duplicated in many notable programs in the base system. It currently handles block reads and writes, as well as reading and writing of the filesystem superblock, and the reading/lookup of inode data. It supports both UFS and UFS2. I will be maintaining it, and porting programs to use it, however for now, it is simply being built as part of world.
2002-07-01 01:45:03 +00:00
# $FreeBSD$
pkgbase: Put a lot of binaries and lib in FreeBSD-runtime All of them are needed to be able to boot to single user and be able to repair a existing FreeBSD installation so put them directly into FreeBSD-runtime. Reviewed by: bapt, gjb Differential Revision: https://reviews.freebsd.org/D21503
2019-09-05 14:13:08 +00:00
PACKAGE= runtime
Add libufs, a library for dealing with UFS filesystems from userland to the build. It is here to compartmentalise functionality currently duplicated in many notable programs in the base system. It currently handles block reads and writes, as well as reading and writing of the filesystem superblock, and the reading/lookup of inode data. It supports both UFS and UFS2. I will be maintaining it, and porting programs to use it, however for now, it is simply being built as part of world.
2002-07-01 01:45:03 +00:00
LIB= ufs
style.Makefile(5)
2003-08-18 15:25:39 +00:00
SHLIBDIR?= /lib
In preparation for adding inode check-hashes, clean up and document the libufs interface for fetching and storing inodes. The undocumented getino / putino interface has been replaced with a new getinode / putinode interface. Convert the utilities that had been using the undocumented interface to use the new documented interface. No functional change (as for now the libufs library does not do inode check-hashes). Reviewed by: kib Tested by: Peter Holm Sponsored by: Netflix
2018-11-13 21:40:56 +00:00
SHLIB_MAJOR= 7
minor style.Makefile(5) fixes: - WARNS before CFLAGS - CFLAGS -DXXX before -IXXX Approved by: ru
2005-09-26 06:23:43 +00:00
Separate kernel crc32() implementation to its own header (gsb_crc32.h) and rename the source to gsb_crc32.c. This is a prerequisite of unifying kernel zlib instances. PR: 229763 Submitted by: Yoshihiro Ota <ota at j.email.ne.jp> Differential Revision: https://reviews.freebsd.org/D20193
2019-06-17 19:49:08 +00:00
SRCS= block.c cgroup.c gsb_crc32.c inode.c sblock.c type.c ffs_subr.c
SRCS+= ffs_tables.c
Add libufs, a library for dealing with UFS filesystems from userland to the build. It is here to compartmentalise functionality currently duplicated in many notable programs in the base system. It currently handles block reads and writes, as well as reading and writing of the filesystem superblock, and the reading/lookup of inode data. It supports both UFS and UFS2. I will be maintaining it, and porting programs to use it, however for now, it is simply being built as part of world.
2002-07-01 01:45:03 +00:00
INCS= libufs.h
minor style.Makefile(5) fixes: - WARNS before CFLAGS - CFLAGS -DXXX before -IXXX Approved by: ru
2005-09-26 06:23:43 +00:00
In preparation for adding inode check-hashes, clean up and document the libufs interface for fetching and storing inodes. The undocumented getino / putino interface has been replaced with a new getinode / putinode interface. Convert the utilities that had been using the undocumented interface to use the new documented interface. No functional change (as for now the libufs library does not do inode check-hashes). Reviewed by: kib Tested by: Peter Holm Sponsored by: Netflix
2018-11-13 21:40:56 +00:00
MAN= bread.3 cgread.3 getinode.3 libufs.3 sbread.3 ufs_disk_close.3
Commit rudimentary libufs manual pages, except for that for getino(3)/putino(3), inode.c has been reworked in Perforce to the point where a manual page may not be accurate. Certainly putino(3) has not even been merged back yet. These will need a lot of improvement for most applications, but they document the API enough to get someone on their feet, most likely. The best documentation still exists in the form of libufs(3) consumers in the base system.
2003-06-09 09:59:11 +00:00
MLINKS+= bread.3 bwrite.3
Add a berase() function which uses ioctl(DIOCGDELETE) to erase a slab of the disk.
2007-12-16 18:02:37 +00:00
MLINKS+= bread.3 berase.3
Commit rudimentary libufs manual pages, except for that for getino(3)/putino(3), inode.c has been reworked in Perforce to the point where a manual page may not be accurate. Certainly putino(3) has not even been merged back yet. These will need a lot of improvement for most applications, but they document the API enough to get someone on their feet, most likely. The best documentation still exists in the form of libufs(3) consumers in the base system.
2003-06-09 09:59:11 +00:00
MLINKS+= cgread.3 cgread1.3
Correct fsck journal-recovery code to update a cylinder-group check-hash after making changes to the cylinder group. The problem was that the journal-recovery code was calling the libufs bwrite() function instead of the cgput() function. The cgput() function updates the cylinder-group check-hash before writing the cylinder group. This change required the additions of the cgget() and cgput() functions to the libufs API to avoid a gratuitous bcopy of every cylinder group to be read or written. These new functions have been added to the libufs manual pages. This was the first opportunity that I have had to use and document the use of the EDOOFUS error code. Reviewed by: kib Reported by: emaste and others
2018-01-17 17:58:24 +00:00
MLINKS+= cgread.3 cgget.3
MLINKS+= cgread.3 cgwrite.3
Implement cgwrite1(3) function which stored a given cylinder group on disk. Sponsored by: home.pl
2006-10-31 21:21:48 +00:00
MLINKS+= cgread.3 cgwrite1.3
Correct fsck journal-recovery code to update a cylinder-group check-hash after making changes to the cylinder group. The problem was that the journal-recovery code was calling the libufs bwrite() function instead of the cgput() function. The cgput() function updates the cylinder-group check-hash before writing the cylinder group. This change required the additions of the cgget() and cgput() functions to the libufs API to avoid a gratuitous bcopy of every cylinder group to be read or written. These new functions have been added to the libufs manual pages. This was the first opportunity that I have had to use and document the use of the EDOOFUS error code. Reviewed by: kib Reported by: emaste and others
2018-01-17 17:58:24 +00:00
MLINKS+= cgread.3 cgput.3
In preparation for adding inode check-hashes, clean up and document the libufs interface for fetching and storing inodes. The undocumented getino / putino interface has been replaced with a new getinode / putinode interface. Convert the utilities that had been using the undocumented interface to use the new documented interface. No functional change (as for now the libufs library does not do inode check-hashes). Reviewed by: kib Tested by: Peter Holm Sponsored by: Netflix
2018-11-13 21:40:56 +00:00
MLINKS+= getinode.3 putinode.3
Commit rudimentary libufs manual pages, except for that for getino(3)/putino(3), inode.c has been reworked in Perforce to the point where a manual page may not be accurate. Certainly putino(3) has not even been merged back yet. These will need a lot of improvement for most applications, but they document the API enough to get someone on their feet, most likely. The best documentation still exists in the form of libufs(3) consumers in the base system.
2003-06-09 09:59:11 +00:00
MLINKS+= sbread.3 sbwrite.3
Refactoring of reading and writing of the UFS/FFS superblock. Specifically reading is done if ffs_sbget() and writing is done in ffs_sbput(). These functions are exported to libufs via the sbget() and sbput() functions which then used in the various filesystem utilities. This work is in preparation for adding subperblock check hashes. No functional change intended. Reviewed by: kib
2018-01-26 00:58:32 +00:00
MLINKS+= sbread.3 sbget.3
MLINKS+= sbread.3 sbput.3
Commit rudimentary libufs manual pages, except for that for getino(3)/putino(3), inode.c has been reworked in Perforce to the point where a manual page may not be accurate. Certainly putino(3) has not even been merged back yet. These will need a lot of improvement for most applications, but they document the API enough to get someone on their feet, most likely. The best documentation still exists in the form of libufs(3) consumers in the base system.
2003-06-09 09:59:11 +00:00
MLINKS+= ufs_disk_close.3 ufs_disk_fillout.3
MLINKS+= ufs_disk_close.3 ufs_disk_fillout_blank.3
MLINKS+= ufs_disk_close.3 ufs_disk_write.3
minor style.Makefile(5) fixes: - WARNS before CFLAGS - CFLAGS -DXXX before -IXXX Approved by: ru
2005-09-26 06:23:43 +00:00
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
.PATH: ${SRCTOP}/sys/libkern ${SRCTOP}/sys/ufs/ffs
minor style.Makefile(5) fixes: - WARNS before CFLAGS - CFLAGS -DXXX before -IXXX Approved by: ru
2005-09-26 06:23:43 +00:00
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
WARNS?= 2
minor style.Makefile(5) fixes: - WARNS before CFLAGS - CFLAGS -DXXX before -IXXX Approved by: ru
2005-09-26 06:23:43 +00:00
CFLAGS+= -D_LIBUFS
DEBUG is a knob that means something else in FreeBSD, use LIBUFS_DEBUG to turn on tracing.
2002-07-01 18:20:48 +00:00
.if defined(LIBUFS_DEBUG)
Add libufs, a library for dealing with UFS filesystems from userland to the build. It is here to compartmentalise functionality currently duplicated in many notable programs in the base system. It currently handles block reads and writes, as well as reading and writing of the filesystem superblock, and the reading/lookup of inode data. It supports both UFS and UFS2. I will be maintaining it, and porting programs to use it, however for now, it is simply being built as part of world.
2002-07-01 01:45:03 +00:00
CFLAGS+= -D_LIBUFS_DEBUGGING
.endif
minor style.Makefile(5) fixes: - WARNS before CFLAGS - CFLAGS -DXXX before -IXXX Approved by: ru
2005-09-26 06:23:43 +00:00
CFLAGS+= -I${.CURDIR}
Add libufs, a library for dealing with UFS filesystems from userland to the build. It is here to compartmentalise functionality currently duplicated in many notable programs in the base system. It currently handles block reads and writes, as well as reading and writing of the filesystem superblock, and the reading/lookup of inode data. It supports both UFS and UFS2. I will be maintaining it, and porting programs to use it, however for now, it is simply being built as part of world.
2002-07-01 01:45:03 +00:00
.include <bsd.lib.mk>
Reference in New Issue Copy Permalink