d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
freebsd-skq/stand/libsa/net.h

134 lines
4.2 KiB
C
Raw Permalink Normal View History

This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
/* $NetBSD: net.h,v 1.10 1995/10/20 00:46:30 cgd Exp $ */
/*
* Copyright (c) 1993 Adam Glass
* Copyright (c) 1992 Regents of the University of California.
* All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Renumber copyright clause 4 Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
* 3. Neither the name of the University nor the names of its contributors
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Cleanup warnings by adding missint prototypes, removing unneeded duplicate prototypes, and adding in several 'const's. Also, add some missing $FreeBSD$'s. Found by: BDECFLAGS
2000-08-03 09:08:29 +00:00
*
* $FreeBSD$
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
*/
Netboot: allow both tftpfs and nfs in both pxeboot and loader.efi Add a new 'netproto' variable which can be set for now to NET_TFTP or NET_NFS (default to NET_NONE) From the dhcp options if one sets the root-path option to: "ip:path", the loader will consider it is booting over NFS (meaning same behaviour as the default current behaviour) if the dhcp option "tftp server address" is set (option 150) the loader will consider it is booting over tftpfs, it will then consider the root-path options with 2 possible case 1. "path" then the IP of the tftp server will be the one passed by the option 150, and the files will be retrieved under "path" on the tftp server 2. "ip:path" then the IP of the tftp server will be the one passed in the option "overwritting the IP from the option 150. We could not "abuse" the rootpath option in the form or tftp://ip:path because this is already used for other purpose by iPXE preventing any chainload from iPXE to the FreeBSD loader. Given at each open(), the loader loops over all available filesystems and keep the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa. the tftpfs and nfs implementation in libstand now return EINVAL early if 'netproto' for that purpose. Reviewed by: tsoome Relnotes: yes Sponsored by: Gandi.net Differential Revision: https://reviews.freebsd.org/D7628
2016-08-31 13:16:40 +00:00
#ifndef _STAND_NET_H
#define _STAND_NET_H
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
#ifndef _KERNEL /* XXX - see <netinet/in.h> */
#undef __IPADDR
Prefer uintXX_t to u_intXX_t A foolish consistency is the hobgoblin of little minds, adored by little statesmen and philosophers and divines. With consistency a great soul has simply nothing to do. -- Ralph Waldo Emerson
2018-03-13 16:33:00 +00:00
#define __IPADDR(x) htonl((uint32_t)(x))
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
#endif
#include "iodesc.h"
#define BA { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
Netboot: allow both tftpfs and nfs in both pxeboot and loader.efi Add a new 'netproto' variable which can be set for now to NET_TFTP or NET_NFS (default to NET_NONE) From the dhcp options if one sets the root-path option to: "ip:path", the loader will consider it is booting over NFS (meaning same behaviour as the default current behaviour) if the dhcp option "tftp server address" is set (option 150) the loader will consider it is booting over tftpfs, it will then consider the root-path options with 2 possible case 1. "path" then the IP of the tftp server will be the one passed by the option 150, and the files will be retrieved under "path" on the tftp server 2. "ip:path" then the IP of the tftp server will be the one passed in the option "overwritting the IP from the option 150. We could not "abuse" the rootpath option in the form or tftp://ip:path because this is already used for other purpose by iPXE preventing any chainload from iPXE to the FreeBSD loader. Given at each open(), the loader loops over all available filesystems and keep the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa. the tftpfs and nfs implementation in libstand now return EINVAL early if 'netproto' for that purpose. Reviewed by: tsoome Relnotes: yes Sponsored by: Gandi.net Differential Revision: https://reviews.freebsd.org/D7628
2016-08-31 13:16:40 +00:00
enum net_proto {
NET_NONE,
NET_NFS,
NET_TFTP
};
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
/* Returns true if n_long's on the same net */
#define SAMENET(a1, a2, m) ((a1.s_addr & m) == (a2.s_addr & m))
#define MACPY(s, d) bcopy((char *)s, (char *)d, 6)
Increase maximum network timeout from 20s to 120s. Given that an ETIMEDOUT return from sendrecv probably means a failure to boot we might as well be generous in the timeout period.
2010-09-28 01:30:49 +00:00
#define MAXTMO 120 /* seconds */
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
#define MINTMO 2 /* seconds */
#define FNAME_SIZE 128
#define IFNAME_SIZE 16
#define RECV_SIZE 1536 /* XXX delete this */
/*
* How much room to leave for headers:
* 14: struct ether_header
* 20: struct ip
* 8: struct udphdr
* That's 42 but let's pad it out to 48 bytes.
*/
#define ETHER_SIZE 14
#define HEADER_SIZE 48
extern u_char bcea[6];
extern char rootpath[FNAME_SIZE];
extern char bootfile[FNAME_SIZE];
extern char hostname[FNAME_SIZE];
extern int hostnamelen;
extern char domainname[FNAME_SIZE];
extern int domainnamelen;
Netboot: allow both tftpfs and nfs in both pxeboot and loader.efi Add a new 'netproto' variable which can be set for now to NET_TFTP or NET_NFS (default to NET_NONE) From the dhcp options if one sets the root-path option to: "ip:path", the loader will consider it is booting over NFS (meaning same behaviour as the default current behaviour) if the dhcp option "tftp server address" is set (option 150) the loader will consider it is booting over tftpfs, it will then consider the root-path options with 2 possible case 1. "path" then the IP of the tftp server will be the one passed by the option 150, and the files will be retrieved under "path" on the tftp server 2. "ip:path" then the IP of the tftp server will be the one passed in the option "overwritting the IP from the option 150. We could not "abuse" the rootpath option in the form or tftp://ip:path because this is already used for other purpose by iPXE preventing any chainload from iPXE to the FreeBSD loader. Given at each open(), the loader loops over all available filesystems and keep the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa. the tftpfs and nfs implementation in libstand now return EINVAL early if 'netproto' for that purpose. Reviewed by: tsoome Relnotes: yes Sponsored by: Gandi.net Differential Revision: https://reviews.freebsd.org/D7628
2016-08-31 13:16:40 +00:00
extern int netproto;
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
extern char ifname[IFNAME_SIZE];
/* All of these are in network order. */
extern struct in_addr myip;
extern struct in_addr rootip;
extern struct in_addr swapip;
extern struct in_addr gateip;
extern struct in_addr nameip;
Allow efi loader to get network params from uboot Summary: efi loader does not work with static network parameters. It always uses BOOTP/DHCP and also uses RARP as a fallback. Problems with DHCP servers can cause the loader to fail to populate network parameters. Submitted by: Siddharth Tuli <siddharthtuli_gmail.com> Reviewed by: imp Sponsored by: Juniper Networks, Inc. Differential Revision: https://reviews.freebsd.org/D20811
2019-07-12 00:54:20 +00:00
extern struct in_addr servip;
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
extern n_long netmask;
If the dhcp server delivers an interface-mtu option, parse it and store the value in a new global intf_mtu for use by the application. These changes were inspired by the patch provided by Robert Blayzor in PR 187094, and will allow loader(8) to propagate the value to the kernel along with the other nfs_diskless parms delivered via environment vars.
2016-03-21 14:58:12 +00:00
extern u_int intf_mtu;
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
extern int debug; /* defined in the machdep sources */
extern struct iodesc sockets[SOPEN_MAX];
/* ARP/RevARP functions: */
u_char *arpwhohas(struct iodesc *, struct in_addr);
void arp_reply(struct iodesc *, void *);
int rarp_getipaddress(int);
/* Link functions: */
ssize_t sendether(struct iodesc *d, void *pkt, size_t len,
u_char *dea, int etype);
loader: network read rework The current read from network is working from up to down - we have some protocol needing the data from the network, so we build the buffer space for that protocol, add the extra space for headers and pass this buffer down to be filled by nif get call in hope, we have guessed the incoming packet size right. Amazingly enough this approach mostly does work, but not always... So, this update does work from down to up - we allocate buffer (based on MTU or frame size info), fill it up, and pass on for upper layers. The obvious problem is that when we should free the buffer - if at all. In the current implementation the upper layer will free the packet on error or when the packet is no longer needed. While working on the issue, the additional issue did pop up - the bios implementation does not have generic get/put interface but is using pxe udpsend/udpreceive instead. So the udp calls are gone and undi interface is implemented instead. Which in turn means slight other changes as we do not need to have duplicated pxe implementation and can just use dev_net. To align packet content, the actual read from nic is using shifted buffer by ETHER_ALIGN (2). Reviewed by: bapt Differential Revision: https://reviews.freebsd.org/D10232
2017-05-06 20:32:27 +00:00
ssize_t readether(struct iodesc *, void **, void **, time_t, uint16_t *);
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
loader: add ip layer code into libstand Implement simple separate ip module and fragment re-assembly. The work is based on send and receive previously implemented in udp.c, moved to ip.c and added the ip fragment re-assembly. This change allows to specify larger tftp or nfs payload, such as: tftp.blksize=4096 or nfs.read_size=4096 Reviewed by: bapt Differential Revision: https://reviews.freebsd.org/D10631
2017-05-15 21:50:34 +00:00
ssize_t sendip(struct iodesc *, void *, size_t, uint8_t);
ssize_t readip(struct iodesc *, void **, void **, time_t, uint8_t);
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
ssize_t sendudp(struct iodesc *, void *, size_t);
loader: network read rework The current read from network is working from up to down - we have some protocol needing the data from the network, so we build the buffer space for that protocol, add the extra space for headers and pass this buffer down to be filled by nif get call in hope, we have guessed the incoming packet size right. Amazingly enough this approach mostly does work, but not always... So, this update does work from down to up - we allocate buffer (based on MTU or frame size info), fill it up, and pass on for upper layers. The obvious problem is that when we should free the buffer - if at all. In the current implementation the upper layer will free the packet on error or when the packet is no longer needed. While working on the issue, the additional issue did pop up - the bios implementation does not have generic get/put interface but is using pxe udpsend/udpreceive instead. So the udp calls are gone and undi interface is implemented instead. Which in turn means slight other changes as we do not need to have duplicated pxe implementation and can just use dev_net. To align packet content, the actual read from nic is using shifted buffer by ETHER_ALIGN (2). Reviewed by: bapt Differential Revision: https://reviews.freebsd.org/D10232
2017-05-06 20:32:27 +00:00
ssize_t readudp(struct iodesc *, void **, void **, time_t);
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
ssize_t sendrecv(struct iodesc *,
loader: network read rework The current read from network is working from up to down - we have some protocol needing the data from the network, so we build the buffer space for that protocol, add the extra space for headers and pass this buffer down to be filled by nif get call in hope, we have guessed the incoming packet size right. Amazingly enough this approach mostly does work, but not always... So, this update does work from down to up - we allocate buffer (based on MTU or frame size info), fill it up, and pass on for upper layers. The obvious problem is that when we should free the buffer - if at all. In the current implementation the upper layer will free the packet on error or when the packet is no longer needed. While working on the issue, the additional issue did pop up - the bios implementation does not have generic get/put interface but is using pxe udpsend/udpreceive instead. So the udp calls are gone and undi interface is implemented instead. Which in turn means slight other changes as we do not need to have duplicated pxe implementation and can just use dev_net. To align packet content, the actual read from nic is using shifted buffer by ETHER_ALIGN (2). Reviewed by: bapt Differential Revision: https://reviews.freebsd.org/D10232
2017-05-06 20:32:27 +00:00
ssize_t (*)(struct iodesc *, void *, size_t),
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
void *, size_t,
libsa: Consolidate tftp sendrecv into net.c sendrecv bootp/arp/rarp/rpc all use the sendrecv implementation in net.c. tftp has its own implementation because it passes an extra parameter into the recv callback for the received payload type to be held. These sendrecv implementations are otherwise equivalent, so consolidate them. The other users of sendrecv won't be using the extra argument to recv, but this gives us only one place to worry about respecting timeouts and one consistent timeout behavior. Tested by: sbruno Reviewed by: sbruno, tsoome MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D14373
2018-02-15 19:49:15 +00:00
ssize_t (*)(struct iodesc *, void **, void **, time_t,
void *),
void **, void **, void *);
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
Cleanup warnings by adding missint prototypes, removing unneeded duplicate prototypes, and adding in several 'const's. Also, add some missing $FreeBSD$'s. Found by: BDECFLAGS
2000-08-03 09:08:29 +00:00
/* bootp/DHCP */
Always issue the pxe request All the code are now only issueing one single dhcp request at startup of the loader meaning we can always request a the PXE informations from the dhcp server. Previous code lost that information, meaning no option 55 anymore (meaning not working with the kea dhcp server) and no request for rootpath etc, no user class Remove the flags from the bootp function which is not needed anymore Reviewed by: tsoome Differential Revision: https://reviews.freebsd.org/D10952
2017-05-27 12:35:01 +00:00
void bootp(int);
Cleanup warnings by adding missint prototypes, removing unneeded duplicate prototypes, and adding in several 'const's. Also, add some missing $FreeBSD$'s. Found by: BDECFLAGS
2000-08-03 09:08:29 +00:00
This is libstand; a support library for standalone executables (eg. bootstrap modules). Obtained from: NetBSD, with some architectural changes and many additions.
1998-08-20 08:19:55 +00:00
/* Utilities: */
char *ether_sprintf(u_char *);
int in_cksum(void *, int);
char *inet_ntoa(struct in_addr);
char *intoa(n_long); /* similar to inet_ntoa */
n_long inet_addr(char *);
Add a comment on the #endif related to the guards Reported by: tsoome
2016-09-13 15:41:05 +00:00
#endif /* ! _STAND_NET_H */
Reference in New Issue Copy Permalink