d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
013c0b493f
freebsd-skq/sys/sparc64/conf/NOTES

152 lines
3.7 KiB
Plaintext
Raw Normal View History

Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES Where needed. Use 'sed' for now in place of "nooptions". Add a sparc64 MD NOTES. Reviewed by: arch@
2003-02-25 20:59:23 +00:00
# $FreeBSD$
#
# This file contains machine dependent kernel configuration notes. For
# machine independent notes, look in /sys/conf/NOTES.
#####################################################################
# CPU OPTIONS
#
# You must specify at least one CPU (the one you intend to run on);
# deleting the specification for CPUs you don't need to use may make
# parts of the system run faster.
Add a commented-out entry for OFW_NEWPCI to GENERIC and NOTES, along with a comment describing it's advantages and the implication of changing it. While being there, fix a typo in NOTES. The option is not enabled in NOTES for now since large portions of code are conditional on it being disabled, too.
2003-07-01 15:13:07 +00:00
# XXX: On the Sparc64, there is only one CPU type
Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES Where needed. Use 'sed' for now in place of "nooptions". Add a sparc64 MD NOTES. Reviewed by: arch@
2003-02-25 20:59:23 +00:00
cpu SUN4U
#####################################################################
# HARDWARE BUS CONFIGURATION
device ebus
device isa
device sbus
device central
device fhc
#####################################################################
# HARDWARE DEVICE CONFIGURATION
#
# Mandatory devices:
#
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
device eeprom # eeprom (really a front-end for the MK48Txx)
Shorten the description of the mk48txx driver to just say that it supports MK48Txx clocks, there are now to many models supported to list them all here.
2004-11-17 12:57:24 +00:00
device mk48txx # Mostek MK48Txx clocks
Add a front-end for the `rtc' device which is a MC146818 compatible clock found on the ISA bus (some USIIe, USIIi and USIIIi models) and EBus (USIII models) instead of a MK48Txx clock. Testet by: Matthew T. Lager" <freebsd@trinetworks.com> on Sun Fire V100, Xavier Beaudouin <kiwi@oav.net> on Netra X1 (initial version)
2004-11-17 16:41:42 +00:00
device rtc # rtc (really a front-end for the MC146818)
device mc146818 # Motorola MC146818 and compatible clocks
Add sbbc(4), a driver for the BootBus controller found in Serengeti and StarCat systems which provides time-of-day services for both as well as console service for Serengeti, i.e. Sun Fire V1280. While the latter is described with a device type of serial in the OFW device tree, it isn't actually an UART. Nevertheless the console service is handled by uart(4) as this allowed to re-use quite a bit of MD and MI code. Actually, this idea is stolen from Linux which interfaces the sun4v hypervisor console with the Linux counterpart of uart(4).
2010-04-10 11:52:12 +00:00
device sbbc # Sun BootBus controller
Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES Where needed. Use 'sed' for now in place of "nooptions". Add a sparc64 MD NOTES. Reviewed by: arch@
2003-02-25 20:59:23 +00:00
#
# Optional devices:
#
Port NetBSD auxio driver. The driver was modified to use led(4) and can be used to announce various system activity. The auxio device provides auxiliary I/O functions and is found on various SBus/EBus UltraSPARC models. At present, only front panel LED is controlled by this driver. Approved by: jake (mentor) Reviewed by: joerg Tested by: joerg
2004-10-09 07:31:03 +00:00
device auxio # auxiliary I/O device
Add epic(4) also here. MFC after: 3 days
2010-01-18 20:25:29 +00:00
device epic # Sun Fire V215/V245 LEDs
- Hook up machfb(4) to the sparc64 build, not enabled in GENERIC by default, yet. - Replace "graphics cards" with "framebuffers" in the description of creator(4) in order to make it uniform with the description of machfb(4) and the latter occur both on-board and as add-on cards.
2005-05-21 20:50:45 +00:00
device creator # Creator, Creator3D and Elite3D framebuffers
device machfb # ATI Mach64 framebuffers
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
device ofw_console # Open Firmware console device
option OFWCONS_POLL_HZ=4 # 20 or more works best on Ultra2
Move more MD devices and options out of MI NOTES.
2006-10-20 09:52:27 +00:00
# PS/2 mouse
device psm
# Options for psm:
options PSM_HOOKRESUME #hook the system resume event, useful
#for some laptops
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
device atkbdc
# The AT keyboard
device atkbd
Revision 1.25 had the ATKBD_DFLT_KEYMAP option turned on and then off: : # Options for atkbd: : options ATKBD_DFLT_KEYMAP # specify the built-in keymap : makeoptions ATKBD_DFLT_KEYMAP=jp.106 [...] : nooption ATKBD_DFLT_KEYMAP : nomakeoption ATKBD_DFLT_KEYMAP (Previously the option was inherited from MI NOTES.) So my tool in rev. 1.26 reduced this to removing all "ATKBD_DFLT_KEYMAP" lines, leaving the option effectively disabled as it was before, but since it's actually supported on sparc64, turn it on now.
2006-10-23 10:05:36 +00:00
# Options for atkbd:
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
Apply r276208 to non-amd64 NOTES files as well to fix tinderbox builds run under a system using vt(4) instead of syscons(4): Use compiled in default keymaps which are available both in syscons and vt.
2015-03-25 15:51:41 +00:00
makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak
Revision 1.25 had the ATKBD_DFLT_KEYMAP option turned on and then off: : # Options for atkbd: : options ATKBD_DFLT_KEYMAP # specify the built-in keymap : makeoptions ATKBD_DFLT_KEYMAP=jp.106 [...] : nooption ATKBD_DFLT_KEYMAP : nomakeoption ATKBD_DFLT_KEYMAP (Previously the option was inherited from MI NOTES.) So my tool in rev. 1.26 reduced this to removing all "ATKBD_DFLT_KEYMAP" lines, leaving the option effectively disabled as it was before, but since it's actually supported on sparc64, turn it on now.
2006-10-23 10:05:36 +00:00
Move more MD devices and options out of MI NOTES.
2006-10-20 09:52:27 +00:00
# `flags' for atkbd:
# 0x01 Force detection of keyboard, else we always assume a keyboard
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
# 0x03 Force detection and avoid reset, might help with certain
# dockingstations
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
- In sunkbd_probe_keyboard() don't bother to determine the keyboard layout as we have no use for that info. Instead let this function return the keyboard ID and verify at its invocation in sunkbd_configure() that we're talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this driver. - Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also triggers the use of AT keyboard maps and thus allows to use the map files in share/syscons/keymaps with this driver at the cost of an additional translation (in ukbd(4) this just is the way of operation). - Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options of the other keyboard drivers allows to specify the default in-kernel keyboard map. For obvious reasons this made to only work when also using SUNKBD_EMULATE_ATKBD. - Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(), which are also required for interoperability with kbdmux(4). - Implement K_CODE mode and FreeBSD keypad compose. - As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than having to duplicate it and #ifdef some more code. - Don't use the TX-buffer for writing the two command bytes for setting the keyboard LEDs as this consequently requires a hardware FIFO that is at least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't have. Thus use an inlined version of uart_putc() to consecutively write the command bytes (a cleaner approach would be to do this via the soft interrupt handler but that variant wouldn't work while in ddb(4)). [1] - Fix some minor style(9) bugs. PR: 90316 [1] Reviewed by: marcel [1]
2006-11-02 00:01:15 +00:00
# Sun type 4/5/6 RS-232@TTL keyboard
#device sunkbd
# Options for sunkbd:
options SUNKBD_EMULATE_ATKBD # allows to use the AT keyboard maps
# in share/syscons/keymaps, required
# for SUNKBD_DFLT_KEYMAP and kbdmux
options SUNKBD_DFLT_KEYMAP # specify the built-in keymap
Apply r276208 to non-amd64 NOTES files as well to fix tinderbox builds run under a system using vt(4) instead of syscons(4): Use compiled in default keymaps which are available both in syscons and vt.
2015-03-25 15:51:41 +00:00
makeoptions SUNKBD_DFLT_KEYMAP=fr.dvorak
- In sunkbd_probe_keyboard() don't bother to determine the keyboard layout as we have no use for that info. Instead let this function return the keyboard ID and verify at its invocation in sunkbd_configure() that we're talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this driver. - Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also triggers the use of AT keyboard maps and thus allows to use the map files in share/syscons/keymaps with this driver at the cost of an additional translation (in ukbd(4) this just is the way of operation). - Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options of the other keyboard drivers allows to specify the default in-kernel keyboard map. For obvious reasons this made to only work when also using SUNKBD_EMULATE_ATKBD. - Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(), which are also required for interoperability with kbdmux(4). - Implement K_CODE mode and FreeBSD keypad compose. - As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than having to duplicate it and #ifdef some more code. - Don't use the TX-buffer for writing the two command bytes for setting the keyboard LEDs as this consequently requires a hardware FIFO that is at least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't have. Thus use an inlined version of uart_putc() to consecutively write the command bytes (a cleaner approach would be to do this via the soft interrupt handler but that variant wouldn't work while in ddb(4)). [1] - Fix some minor style(9) bugs. PR: 90316 [1] Reviewed by: marcel [1]
2006-11-02 00:01:15 +00:00
Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES Where needed. Use 'sed' for now in place of "nooptions". Add a sparc64 MD NOTES. Reviewed by: arch@
2003-02-25 20:59:23 +00:00
#####################################################################
# Devices we don't want to deal with
nodevice daemon_saver
Fixed sparc64 LINT build.
2005-01-14 13:16:13 +00:00
nodevice snake_saver
Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES Where needed. Use 'sed' for now in place of "nooptions". Add a sparc64 MD NOTES. Reviewed by: arch@
2003-02-25 20:59:23 +00:00
nodevice star_saver
nodevice bktr
nodevice fdc
nodevice ppc
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_ad1816
nodevice snd_als4000
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_cmi
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_cs4281
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_csa
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_ds1
nodevice snd_emu10k1
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_ess
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_fm801
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_gusc
nodevice snd_ich
nodevice snd_maestro
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_maestro3
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_mss
nodevice snd_neomagic
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_sb16
nodevice snd_sb8
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_sbc
nodevice snd_solo
Catch up with version 600000 of config(8), quotes around device names containing digits are no longer required.
2004-11-17 12:07:14 +00:00
nodevice snd_t4dwave
nodevice snd_via8233
nodevice snd_via82c686
Try to catch up with reality: - Chase the split of pcm(4). This unbreaks LINT compiles. - sc(4) basically works and a lot of its options should be supported. - Add the creator and ofw_console drivers. - vinum(4) should work, at least its module was turned on for sparc64 a while ago. - Don't build sio(4). Its EBus front-end was removed a while ago and the ISA one hardly works. Use uart(4) instead, it's not perfect yet but works much better.
2004-08-16 23:21:06 +00:00
nodevice snd_vibes
nodevice snd_uaudio
Move most everything back to a MI NOTES, and use "nodevice" in MD NOTES Where needed. Use 'sed' for now in place of "nooptions". Add a sparc64 MD NOTES. Reviewed by: arch@
2003-02-25 20:59:23 +00:00
nodevice aha
nodevice bt
nodevice ep
nodevice ex
Implemented "nooption" and "nomakeoption" config(8) tokens. Fixed memory leak in the "nodevice" option implementation. Use these instead of sed(1) in MD NOTES. Use a single makefile (sys/conf/makeLINT.mk) to generate LINT for all architectures. (Previous versions missed the LINT dependency on Makefile, and i386 version also missed the dependency on ${NOTES}.) Fixed bugs in the previous NOTES conversion using the "nodevice" token and sed(1): - i386 LINT lost "device pst". - pc98 LINT lost SC_*, MAXCONS and KBD_DISABLE_KEYMAP_LOAD options, and got needless DPT_* options. - Added nooptions PPC_DEBUG, PPC_PROBE_CHIPSET, KBD_INSTALL_CDEV to sparc64 LINT so that it has a chance to config(8). This basically returns us to where we were before.
2003-02-26 23:36:59 +00:00
#####################################################################
# Options we don't want to deal with
Revert previous change to sys/conf/options & associated notes so builds can resume while I investigate what I had missed.
2017-04-07 21:06:50 +00:00
nooption FDC_DEBUG
Exclude options COMPAT_FREEBSD4 now that the MD freebsd4_sigreturn() is gone since r201396 and which is also in line with the fact that FreeBSD 4 didn't supported sparc64.
2010-01-03 02:58:43 +00:00
nooption COMPAT_FREEBSD4
Implemented "nooption" and "nomakeoption" config(8) tokens. Fixed memory leak in the "nodevice" option implementation. Use these instead of sed(1) in MD NOTES. Use a single makefile (sys/conf/makeLINT.mk) to generate LINT for all architectures. (Previous versions missed the LINT dependency on Makefile, and i386 version also missed the dependency on ${NOTES}.) Fixed bugs in the previous NOTES conversion using the "nodevice" token and sed(1): - i386 LINT lost "device pst". - pc98 LINT lost SC_*, MAXCONS and KBD_DISABLE_KEYMAP_LOAD options, and got needless DPT_* options. - Added nooptions PPC_DEBUG, PPC_PROBE_CHIPSET, KBD_INSTALL_CDEV to sparc64 LINT so that it has a chance to config(8). This basically returns us to where we were before.
2003-02-26 23:36:59 +00:00
nooption SC_RENDER_DEBUG
nooption SC_DEBUG_LEVEL
nooption PPC_DEBUG
nooption PPC_PROBE_CHIPSET
nooption SC_NO_SUSPEND_VTYSWITCH
nooption SC_NO_FONT_LOADING
nooption SC_KERNEL_CONS_REV_ATTR
nooption SC_KERNEL_CONS_ATTR
nooption SC_NORM_REV_ATTR
nooption SC_NORM_ATTR
nooption SC_DFLT_FONT
nooption SC_ALT_MOUSE_IMAGE
nooption EXT2FS
#####################################################################
# Make options we don't want to deal with
nomakeoption SC_DFLT_FONT
Reference in New Issue Copy Permalink