freebsd-skq/sys/kern/kern_time.c

673 lines
17 KiB
C
Raw Normal View History

1994-05-24 10:09:53 +00:00
/*
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_time.c 8.1 (Berkeley) 6/10/93
* $Id: kern_time.c,v 1.63 1999/04/07 17:32:21 mjacob Exp $
1994-05-24 10:09:53 +00:00
*/
#include <sys/param.h>
#include <sys/buf.h>
#include <sys/sysproto.h>
1994-05-24 10:09:53 +00:00
#include <sys/resourcevar.h>
#include <sys/signalvar.h>
1994-05-24 10:09:53 +00:00
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/sysent.h>
1994-05-24 10:09:53 +00:00
#include <sys/proc.h>
#include <sys/time.h>
1994-05-24 10:09:53 +00:00
#include <sys/vnode.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
1994-05-24 10:09:53 +00:00
struct timezone tz;
1995-05-30 08:16:23 +00:00
/*
1994-05-24 10:09:53 +00:00
* Time of day and interval timer support.
*
* These routines provide the kernel entry points to get and set
* the time-of-day and per-process interval timers. Subroutines
* here provide support for adding and subtracting timeval structures
* and decrementing interval timers, optionally reloading the interval
* timers when they expire.
*/
static int nanosleep1 __P((struct proc *p, struct timespec *rqt,
struct timespec *rmt));
static int settime __P((struct timeval *));
static void timevalfix __P((struct timeval *));
static void no_lease_updatetime __P((int));
1997-10-26 20:26:33 +00:00
static void
no_lease_updatetime(deltat)
int deltat;
{
}
void (*lease_updatetime) __P((int)) = no_lease_updatetime;
static int
settime(tv)
struct timeval *tv;
{
struct timeval delta, tv1, tv2;
static struct timeval maxtime, laststep;
struct timespec ts;
int s;
s = splclock();
microtime(&tv1);
delta = *tv;
timevalsub(&delta, &tv1);
/*
* If the system is secure, we do not allow the time to be
* set to a value earlier than 1 second less than the highest
* time we have yet seen. The worst a miscreant can do in
* this circumstance is "freeze" time. He couldn't go
* back to the past.
*
* We similarly do not allow the clock to be stepped more
* than one second, nor more than once per second. This allows
* a miscreant to make the clock march double-time, but no worse.
*/
if (securelevel > 1) {
if (delta.tv_sec < 0 || delta.tv_usec < 0) {
/*
* Update maxtime to latest time we've seen.
*/
if (tv1.tv_sec > maxtime.tv_sec)
maxtime = tv1;
tv2 = *tv;
timevalsub(&tv2, &maxtime);
if (tv2.tv_sec < -1) {
tv->tv_sec = maxtime.tv_sec - 1;
printf("Time adjustment clamped to -1 second\n");
}
} else {
if (tv1.tv_sec == laststep.tv_sec) {
splx(s);
return (EPERM);
}
if (delta.tv_sec > 1) {
tv->tv_sec = tv1.tv_sec + 1;
printf("Time adjustment clamped to +1 second\n");
}
laststep = *tv;
}
}
ts.tv_sec = tv->tv_sec;
ts.tv_nsec = tv->tv_usec * 1000;
set_timecounter(&ts);
(void) splsoftclock();
lease_updatetime(delta.tv_sec);
splx(s);
resettodr();
return (0);
}
#ifndef _SYS_SYSPROTO_H_
struct clock_gettime_args {
clockid_t clock_id;
struct timespec *tp;
};
#endif
/* ARGSUSED */
int
clock_gettime(p, uap)
struct proc *p;
struct clock_gettime_args *uap;
{
struct timespec ats;
if (SCARG(uap, clock_id) != CLOCK_REALTIME)
return (EINVAL);
nanotime(&ats);
return (copyout(&ats, SCARG(uap, tp), sizeof(ats)));
}
#ifndef _SYS_SYSPROTO_H_
struct clock_settime_args {
clockid_t clock_id;
const struct timespec *tp;
};
#endif
/* ARGSUSED */
int
clock_settime(p, uap)
struct proc *p;
struct clock_settime_args *uap;
{
struct timeval atv;
struct timespec ats;
int error;
if ((error = suser(p->p_ucred, &p->p_acflag)) != 0)
return (error);
if (SCARG(uap, clock_id) != CLOCK_REALTIME)
return (EINVAL);
if ((error = copyin(SCARG(uap, tp), &ats, sizeof(ats))) != 0)
return (error);
if (ats.tv_nsec < 0 || ats.tv_nsec >= 1000000000)
return (EINVAL);
/* XXX Don't convert nsec->usec and back */
TIMESPEC_TO_TIMEVAL(&atv, &ats);
if ((error = settime(&atv)))
return (error);
return (0);
}
#ifndef _SYS_SYSPROTO_H_
struct clock_getres_args {
clockid_t clock_id;
struct timespec *tp;
};
#endif
int
clock_getres(p, uap)
struct proc *p;
struct clock_getres_args *uap;
{
struct timespec ts;
int error;
if (SCARG(uap, clock_id) != CLOCK_REALTIME)
return (EINVAL);
error = 0;
if (SCARG(uap, tp)) {
ts.tv_sec = 0;
ts.tv_nsec = 1000000000 / timecounter->tc_frequency;
error = copyout(&ts, SCARG(uap, tp), sizeof(ts));
}
return (error);
}
static int nanowait;
static int
nanosleep1(p, rqt, rmt)
struct proc *p;
struct timespec *rqt, *rmt;
{
struct timespec ts, ts2, ts3;
struct timeval tv;
int error;
if (rqt->tv_nsec < 0 || rqt->tv_nsec >= 1000000000)
return (EINVAL);
if (rqt->tv_sec < 0 || (rqt->tv_sec == 0 && rqt->tv_nsec == 0))
return (0);
getnanouptime(&ts);
timespecadd(&ts, rqt);
TIMESPEC_TO_TIMEVAL(&tv, rqt);
for (;;) {
error = tsleep(&nanowait, PWAIT | PCATCH, "nanslp",
tvtohz(&tv));
getnanouptime(&ts2);
if (error != EWOULDBLOCK) {
if (error == ERESTART)
error = EINTR;
if (rmt != NULL) {
timespecsub(&ts, &ts2);
if (ts.tv_sec < 0)
timespecclear(&ts);
*rmt = ts;
}
return (error);
}
if (timespeccmp(&ts2, &ts, >=))
return (0);
ts3 = ts;
timespecsub(&ts3, &ts2);
TIMESPEC_TO_TIMEVAL(&tv, &ts3);
}
}
#ifndef _SYS_SYSPROTO_H_
struct nanosleep_args {
struct timespec *rqtp;
struct timespec *rmtp;
};
#endif
/* ARGSUSED */
int
nanosleep(p, uap)
struct proc *p;
struct nanosleep_args *uap;
{
struct timespec rmt, rqt;
int error, error2;
error = copyin(SCARG(uap, rqtp), &rqt, sizeof(rqt));
if (error)
return (error);
if (SCARG(uap, rmtp))
if (!useracc((caddr_t)SCARG(uap, rmtp), sizeof(rmt), B_WRITE))
return (EFAULT);
error = nanosleep1(p, &rqt, &rmt);
if (error && SCARG(uap, rmtp)) {
error2 = copyout(&rmt, SCARG(uap, rmtp), sizeof(rmt));
if (error2) /* XXX shouldn't happen, did useracc() above */
return (error2);
}
return (error);
}
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct gettimeofday_args {
struct timeval *tp;
struct timezone *tzp;
};
#endif
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
gettimeofday(p, uap)
1994-05-24 10:09:53 +00:00
struct proc *p;
register struct gettimeofday_args *uap;
{
struct timeval atv;
int error = 0;
if (uap->tp) {
microtime(&atv);
if ((error = copyout((caddr_t)&atv, (caddr_t)uap->tp,
sizeof (atv))))
1994-05-24 10:09:53 +00:00
return (error);
}
if (uap->tzp)
error = copyout((caddr_t)&tz, (caddr_t)uap->tzp,
sizeof (tz));
return (error);
}
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct settimeofday_args {
struct timeval *tv;
struct timezone *tzp;
};
#endif
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
settimeofday(p, uap)
1994-05-24 10:09:53 +00:00
struct proc *p;
struct settimeofday_args *uap;
{
struct timeval atv;
1994-05-24 10:09:53 +00:00
struct timezone atz;
int error;
1994-05-24 10:09:53 +00:00
if ((error = suser(p->p_ucred, &p->p_acflag)))
1994-05-24 10:09:53 +00:00
return (error);
/* Verify all parameters before changing time. */
if (uap->tv) {
if ((error = copyin((caddr_t)uap->tv, (caddr_t)&atv,
sizeof(atv))))
return (error);
if (atv.tv_usec < 0 || atv.tv_usec >= 1000000)
return (EINVAL);
}
1994-05-24 10:09:53 +00:00
if (uap->tzp &&
(error = copyin((caddr_t)uap->tzp, (caddr_t)&atz, sizeof(atz))))
return (error);
if (uap->tv && (error = settime(&atv)))
return (error);
1994-05-24 10:09:53 +00:00
if (uap->tzp)
tz = atz;
return (0);
}
int tickdelta; /* current clock skew, us. per tick */
long timedelta; /* unapplied time correction, us. */
static long bigadj = 1000000; /* use 10x skew above bigadj us. */
1994-05-24 10:09:53 +00:00
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct adjtime_args {
struct timeval *delta;
struct timeval *olddelta;
};
#endif
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
adjtime(p, uap)
1994-05-24 10:09:53 +00:00
struct proc *p;
register struct adjtime_args *uap;
{
struct timeval atv;
register long ndelta, ntickdelta, odelta;
int s, error;
if ((error = suser(p->p_ucred, &p->p_acflag)))
1994-05-24 10:09:53 +00:00
return (error);
if ((error =
copyin((caddr_t)uap->delta, (caddr_t)&atv, sizeof(struct timeval))))
1994-05-24 10:09:53 +00:00
return (error);
/*
* Compute the total correction and the rate at which to apply it.
* Round the adjustment down to a whole multiple of the per-tick
* delta, so that after some number of incremental changes in
* hardclock(), tickdelta will become zero, lest the correction
* overshoot and start taking us away from the desired final time.
*/
ndelta = atv.tv_sec * 1000000 + atv.tv_usec;
if (ndelta > bigadj || ndelta < -bigadj)
1994-05-24 10:09:53 +00:00
ntickdelta = 10 * tickadj;
else
ntickdelta = tickadj;
if (ndelta % ntickdelta)
ndelta = ndelta / ntickdelta * ntickdelta;
/*
* To make hardclock()'s job easier, make the per-tick delta negative
* if we want time to run slower; then hardclock can simply compute
* tick + tickdelta, and subtract tickdelta from timedelta.
*/
if (ndelta < 0)
ntickdelta = -ntickdelta;
s = splclock();
odelta = timedelta;
timedelta = ndelta;
tickdelta = ntickdelta;
splx(s);
if (uap->olddelta) {
atv.tv_sec = odelta / 1000000;
atv.tv_usec = odelta % 1000000;
(void) copyout((caddr_t)&atv, (caddr_t)uap->olddelta,
sizeof(struct timeval));
}
return (0);
}
/*
* Get value of an interval timer. The process virtual and
* profiling virtual time timers are kept in the p_stats area, since
* they can be swapped out. These are kept internally in the
* way they are specified externally: in time until they expire.
*
* The real time interval timer is kept in the process table slot
* for the process, and its value (it_value) is kept as an
* absolute time rather than as a delta, so that it is easy to keep
* periodic real-time signals from drifting.
*
* Virtual time timers are processed in the hardclock() routine of
* kern_clock.c. The real time timer is processed by a timeout
* routine, called from the softclock() routine. Since a callout
* may be delayed in real time due to interrupt processing in the system,
* it is possible for the real time timeout routine (realitexpire, given below),
* to be delayed in real time past when it is supposed to occur. It
* does not suffice, therefore, to reload the real timer .it_value from the
* real time timers .it_interval. Rather, we compute the next time in
* absolute time the timer should go off.
*/
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct getitimer_args {
u_int which;
struct itimerval *itv;
};
#endif
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
getitimer(p, uap)
1994-05-24 10:09:53 +00:00
struct proc *p;
register struct getitimer_args *uap;
{
struct timeval ctv;
1994-05-24 10:09:53 +00:00
struct itimerval aitv;
int s;
if (uap->which > ITIMER_PROF)
return (EINVAL);
s = splclock(); /* XXX still needed ? */
1994-05-24 10:09:53 +00:00
if (uap->which == ITIMER_REAL) {
/*
* Convert from absolute to relative time in .it_value
1994-05-24 10:09:53 +00:00
* part of real time timer. If time for real time timer
* has passed return 0, else return difference between
* current time and time for the timer to go off.
*/
aitv = p->p_realtimer;
if (timevalisset(&aitv.it_value)) {
getmicrouptime(&ctv);
if (timevalcmp(&aitv.it_value, &ctv, <))
timevalclear(&aitv.it_value);
1994-05-24 10:09:53 +00:00
else
timevalsub(&aitv.it_value, &ctv);
}
1994-05-24 10:09:53 +00:00
} else
aitv = p->p_stats->p_timer[uap->which];
splx(s);
return (copyout((caddr_t)&aitv, (caddr_t)uap->itv,
sizeof (struct itimerval)));
}
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct setitimer_args {
u_int which;
struct itimerval *itv, *oitv;
};
#endif
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
setitimer(p, uap)
1994-05-24 10:09:53 +00:00
struct proc *p;
register struct setitimer_args *uap;
{
struct itimerval aitv;
struct timeval ctv;
1994-05-24 10:09:53 +00:00
register struct itimerval *itvp;
int s, error;
if (uap->which > ITIMER_PROF)
return (EINVAL);
itvp = uap->itv;
if (itvp && (error = copyin((caddr_t)itvp, (caddr_t)&aitv,
sizeof(struct itimerval))))
return (error);
if ((uap->itv = uap->oitv) &&
(error = getitimer(p, (struct getitimer_args *)uap)))
1994-05-24 10:09:53 +00:00
return (error);
if (itvp == 0)
return (0);
if (itimerfix(&aitv.it_value))
return (EINVAL);
if (!timevalisset(&aitv.it_value))
timevalclear(&aitv.it_interval);
else if (itimerfix(&aitv.it_interval))
1994-05-24 10:09:53 +00:00
return (EINVAL);
s = splclock(); /* XXX: still needed ? */
1994-05-24 10:09:53 +00:00
if (uap->which == ITIMER_REAL) {
if (timevalisset(&p->p_realtimer.it_value))
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
untimeout(realitexpire, (caddr_t)p, p->p_ithandle);
if (timevalisset(&aitv.it_value))
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
p->p_ithandle = timeout(realitexpire, (caddr_t)p,
tvtohz(&aitv.it_value));
getmicrouptime(&ctv);
timevaladd(&aitv.it_value, &ctv);
1994-05-24 10:09:53 +00:00
p->p_realtimer = aitv;
} else
p->p_stats->p_timer[uap->which] = aitv;
splx(s);
return (0);
}
/*
* Real interval timer expired:
* send process whose timer expired an alarm signal.
* If time is not set up to reload, then just return.
* Else compute next time timer should go off which is > current time.
* This is where delay in processing this timeout causes multiple
* SIGALRM calls to be compressed into one.
* tvtohz() always adds 1 to allow for the time until the next clock
* interrupt being strictly less than 1 clock tick, but we don't want
* that here since we want to appear to be in sync with the clock
* interrupt even when we're delayed.
1994-05-24 10:09:53 +00:00
*/
void
realitexpire(arg)
void *arg;
{
register struct proc *p;
struct timeval ctv, ntv;
1994-05-24 10:09:53 +00:00
int s;
p = (struct proc *)arg;
psignal(p, SIGALRM);
if (!timevalisset(&p->p_realtimer.it_interval)) {
timevalclear(&p->p_realtimer.it_value);
1994-05-24 10:09:53 +00:00
return;
}
for (;;) {
s = splclock(); /* XXX: still neeeded ? */
1994-05-24 10:09:53 +00:00
timevaladd(&p->p_realtimer.it_value,
&p->p_realtimer.it_interval);
getmicrouptime(&ctv);
if (timevalcmp(&p->p_realtimer.it_value, &ctv, >)) {
ntv = p->p_realtimer.it_value;
timevalsub(&ntv, &ctv);
p->p_ithandle = timeout(realitexpire, (caddr_t)p,
tvtohz(&ntv) - 1);
1994-05-24 10:09:53 +00:00
splx(s);
return;
}
splx(s);
}
}
/*
* Check that a proposed value to load into the .it_value or
* .it_interval part of an interval timer is acceptable, and
* fix it to have at least minimal value (i.e. if it is less
* than the resolution of the clock, round it up.)
*/
int
1994-05-24 10:09:53 +00:00
itimerfix(tv)
struct timeval *tv;
{
if (tv->tv_sec < 0 || tv->tv_sec > 100000000 ||
tv->tv_usec < 0 || tv->tv_usec >= 1000000)
return (EINVAL);
if (tv->tv_sec == 0 && tv->tv_usec != 0 && tv->tv_usec < tick)
tv->tv_usec = tick;
return (0);
}
/*
* Decrement an interval timer by a specified number
* of microseconds, which must be less than a second,
* i.e. < 1000000. If the timer expires, then reload
* it. In this case, carry over (usec - old value) to
* reduce the value reloaded into the timer so that
* the timer does not drift. This routine assumes
* that it is called in a context where the timers
* on which it is operating cannot change in value.
*/
int
1994-05-24 10:09:53 +00:00
itimerdecr(itp, usec)
register struct itimerval *itp;
int usec;
{
if (itp->it_value.tv_usec < usec) {
if (itp->it_value.tv_sec == 0) {
/* expired, and already in next interval */
usec -= itp->it_value.tv_usec;
goto expire;
}
itp->it_value.tv_usec += 1000000;
itp->it_value.tv_sec--;
}
itp->it_value.tv_usec -= usec;
usec = 0;
if (timevalisset(&itp->it_value))
1994-05-24 10:09:53 +00:00
return (1);
/* expired, exactly at end of interval */
expire:
if (timevalisset(&itp->it_interval)) {
1994-05-24 10:09:53 +00:00
itp->it_value = itp->it_interval;
itp->it_value.tv_usec -= usec;
if (itp->it_value.tv_usec < 0) {
itp->it_value.tv_usec += 1000000;
itp->it_value.tv_sec--;
}
} else
itp->it_value.tv_usec = 0; /* sec is already 0 */
return (0);
}
/*
* Add and subtract routines for timevals.
* N.B.: subtract routine doesn't deal with
* results which are before the beginning,
* it just gets very confused in this case.
* Caveat emptor.
*/
void
1994-05-24 10:09:53 +00:00
timevaladd(t1, t2)
struct timeval *t1, *t2;
{
t1->tv_sec += t2->tv_sec;
t1->tv_usec += t2->tv_usec;
timevalfix(t1);
}
void
1994-05-24 10:09:53 +00:00
timevalsub(t1, t2)
struct timeval *t1, *t2;
{
t1->tv_sec -= t2->tv_sec;
t1->tv_usec -= t2->tv_usec;
timevalfix(t1);
}
static void
1994-05-24 10:09:53 +00:00
timevalfix(t1)
struct timeval *t1;
{
if (t1->tv_usec < 0) {
t1->tv_sec--;
t1->tv_usec += 1000000;
}
if (t1->tv_usec >= 1000000) {
t1->tv_sec++;
t1->tv_usec -= 1000000;
}
}