freebsd-skq/sys/net80211/ieee80211_node.c

2799 lines
78 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_media.h>
#include <net/ethernet.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_input.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#ifdef IEEE80211_SUPPORT_TDMA
#include <net80211/ieee80211_tdma.h>
#endif
#include <net80211/ieee80211_wds.h>
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#include <net80211/ieee80211_mesh.h>
#include <net80211/ieee80211_ratectl.h>
#include <net/bpf.h>
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
/*
* IEEE80211_NODE_HASHSIZE must be a power of 2.
*/
CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0);
/*
* Association id's are managed with a bit vector.
*/
#define IEEE80211_AID_SET(_vap, b) \
((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \
(1 << (IEEE80211_AID(b) % 32)))
#define IEEE80211_AID_CLR(_vap, b) \
((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \
~(1 << (IEEE80211_AID(b) % 32)))
#define IEEE80211_AID_ISSET(_vap, b) \
((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32)))
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
static int ieee80211_sta_join1(struct ieee80211_node *);
static struct ieee80211_node *node_alloc(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
static void node_cleanup(struct ieee80211_node *);
static void node_free(struct ieee80211_node *);
static void node_age(struct ieee80211_node *);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
static int8_t node_getrssi(const struct ieee80211_node *);
static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *);
static void node_getmimoinfo(const struct ieee80211_node *,
struct ieee80211_mimo_info *);
static void _ieee80211_free_node(struct ieee80211_node *);
static void node_reclaim(struct ieee80211_node_table *nt,
struct ieee80211_node *ni);
static void ieee80211_node_table_init(struct ieee80211com *ic,
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
struct ieee80211_node_table *nt, const char *name,
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
int inact, int keymaxix);
static void ieee80211_node_table_reset(struct ieee80211_node_table *,
struct ieee80211vap *);
static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt);
static void ieee80211_erp_timeout(struct ieee80211com *);
MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state");
MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie");
void
ieee80211_node_attach(struct ieee80211com *ic)
{
/* XXX really want maxlen enforced per-sta */
ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8,
"802.11 staging q");
ieee80211_node_table_init(ic, &ic->ic_sta, "station",
IEEE80211_INACT_INIT, ic->ic_max_keyix);
callout_init(&ic->ic_inact, 1);
callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz,
ieee80211_node_timeout, ic);
ic->ic_node_alloc = node_alloc;
ic->ic_node_free = node_free;
ic->ic_node_cleanup = node_cleanup;
ic->ic_node_age = node_age;
ic->ic_node_drain = node_age; /* NB: same as age */
ic->ic_node_getrssi = node_getrssi;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ic->ic_node_getsignal = node_getsignal;
ic->ic_node_getmimoinfo = node_getmimoinfo;
/*
* Set flags to be propagated to all vap's;
* these define default behaviour/configuration.
*/
ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
}
void
ieee80211_node_detach(struct ieee80211com *ic)
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
{
callout_drain(&ic->ic_inact);
ieee80211_node_table_cleanup(&ic->ic_sta);
ieee80211_ageq_cleanup(&ic->ic_stageq);
}
void
ieee80211_node_vattach(struct ieee80211vap *vap)
{
/* NB: driver can override */
vap->iv_max_aid = IEEE80211_AID_DEF;
/* default station inactivity timer setings */
vap->iv_inact_init = IEEE80211_INACT_INIT;
vap->iv_inact_auth = IEEE80211_INACT_AUTH;
vap->iv_inact_run = IEEE80211_INACT_RUN;
vap->iv_inact_probe = IEEE80211_INACT_PROBE;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT,
"%s: init %u auth %u run %u probe %u\n", __func__,
vap->iv_inact_init, vap->iv_inact_auth,
vap->iv_inact_run, vap->iv_inact_probe);
}
void
ieee80211_node_latevattach(struct ieee80211vap *vap)
{
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
/* XXX should we allow max aid to be zero? */
if (vap->iv_max_aid < IEEE80211_AID_MIN) {
vap->iv_max_aid = IEEE80211_AID_MIN;
if_printf(vap->iv_ifp,
"WARNING: max aid too small, changed to %d\n",
vap->iv_max_aid);
}
vap->iv_aid_bitmap = (uint32_t *) IEEE80211_MALLOC(
howmany(vap->iv_max_aid, 32) * sizeof(uint32_t),
M_80211_NODE,
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
if (vap->iv_aid_bitmap == NULL) {
/* XXX no way to recover */
printf("%s: no memory for AID bitmap, max aid %d!\n",
__func__, vap->iv_max_aid);
vap->iv_max_aid = 0;
}
}
ieee80211_reset_bss(vap);
vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode);
}
void
ieee80211_node_vdetach(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
ieee80211_node_table_reset(&ic->ic_sta, vap);
if (vap->iv_bss != NULL) {
ieee80211_free_node(vap->iv_bss);
vap->iv_bss = NULL;
}
if (vap->iv_aid_bitmap != NULL) {
IEEE80211_FREE(vap->iv_aid_bitmap, M_80211_NODE);
vap->iv_aid_bitmap = NULL;
}
}
/*
* Port authorize/unauthorize interfaces for use by an authenticator.
*/
void
ieee80211_node_authorize(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
ni->ni_flags |= IEEE80211_NODE_AUTH;
ni->ni_inact_reload = vap->iv_inact_run;
ni->ni_inact = ni->ni_inact_reload;
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact_reload %u", __func__, ni->ni_inact_reload);
}
void
ieee80211_node_unauthorize(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
ni->ni_flags &= ~IEEE80211_NODE_AUTH;
ni->ni_inact_reload = vap->iv_inact_auth;
if (ni->ni_inact > ni->ni_inact_reload)
ni->ni_inact = ni->ni_inact_reload;
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact_reload %u inact %u", __func__,
ni->ni_inact_reload, ni->ni_inact);
}
/*
* Fix tx parameters for a node according to ``association state''.
*/
void
ieee80211_node_setuptxparms(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
2009-01-29 23:11:18 +00:00
enum ieee80211_phymode mode;
if (ni->ni_flags & IEEE80211_NODE_HT) {
if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan))
2009-01-29 23:11:18 +00:00
mode = IEEE80211_MODE_11NA;
else
2009-01-29 23:11:18 +00:00
mode = IEEE80211_MODE_11NG;
} else { /* legacy rate handling */
2009-01-29 23:11:18 +00:00
if (IEEE80211_IS_CHAN_ST(ni->ni_chan))
mode = IEEE80211_MODE_STURBO_A;
else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan))
mode = IEEE80211_MODE_HALF;
else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan))
mode = IEEE80211_MODE_QUARTER;
/* NB: 108A should be handled as 11a */
2009-01-29 23:11:18 +00:00
else if (IEEE80211_IS_CHAN_A(ni->ni_chan))
mode = IEEE80211_MODE_11A;
else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) ||
(ni->ni_flags & IEEE80211_NODE_ERP))
2009-01-29 23:11:18 +00:00
mode = IEEE80211_MODE_11G;
else
2009-01-29 23:11:18 +00:00
mode = IEEE80211_MODE_11B;
}
2009-01-29 23:11:18 +00:00
ni->ni_txparms = &vap->iv_txparms[mode];
}
/*
* Set/change the channel. The rate set is also updated as
* to insure a consistent view by drivers.
* XXX should be private but hostap needs it to deal with CSA
*/
void
ieee80211_node_set_chan(struct ieee80211_node *ni,
struct ieee80211_channel *chan)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
enum ieee80211_phymode mode;
KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel"));
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_chan = chan;
mode = ieee80211_chan2mode(chan);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (IEEE80211_IS_CHAN_HT(chan)) {
/*
* We must install the legacy rate est in ni_rates and the
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
* HT rate set in ni_htrates.
*/
ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan);
/*
* Setup bss tx parameters based on operating mode. We
* use legacy rates when operating in a mixed HT+non-HT bss
* and non-ERP rates in 11g for mixed ERP+non-ERP bss.
*/
if (mode == IEEE80211_MODE_11NA &&
(vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
mode = IEEE80211_MODE_11A;
else if (mode == IEEE80211_MODE_11NG &&
(vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
mode = IEEE80211_MODE_11G;
if (mode == IEEE80211_MODE_11G &&
(vap->iv_flags & IEEE80211_F_PUREG) == 0)
mode = IEEE80211_MODE_11B;
}
ni->ni_txparms = &vap->iv_txparms[mode];
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_rates = *ieee80211_get_suprates(ic, chan);
}
static __inline void
copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss)
{
/* propagate useful state */
nbss->ni_authmode = obss->ni_authmode;
nbss->ni_txpower = obss->ni_txpower;
nbss->ni_vlan = obss->ni_vlan;
/* XXX statistics? */
/* XXX legacy WDS bssid? */
}
void
ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
"%s: creating %s on channel %u%c\n", __func__,
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ieee80211_opmode_name[vap->iv_opmode],
ieee80211_chan2ieee(ic, chan),
ieee80211_channel_type_char(chan));
ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
if (ni == NULL) {
/* XXX recovery? */
return;
}
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
ni->ni_esslen = vap->iv_des_ssid[0].len;
memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen);
if (vap->iv_bss != NULL)
copy_bss(ni, vap->iv_bss);
ni->ni_intval = ic->ic_bintval;
if (vap->iv_flags & IEEE80211_F_PRIVACY)
ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
if (ic->ic_phytype == IEEE80211_T_FH) {
ni->ni_fhdwell = 200; /* XXX */
ni->ni_fhindex = 1;
}
if (vap->iv_opmode == IEEE80211_M_IBSS) {
vap->iv_flags |= IEEE80211_F_SIBSS;
ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS; /* XXX */
if (vap->iv_flags & IEEE80211_F_DESBSSID)
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid);
else {
get_random_bytes(ni->ni_bssid, IEEE80211_ADDR_LEN);
/* clear group bit, add local bit */
ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02;
}
} else if (vap->iv_opmode == IEEE80211_M_AHDEMO) {
if (vap->iv_flags & IEEE80211_F_DESBSSID)
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid);
else
#ifdef IEEE80211_SUPPORT_TDMA
if ((vap->iv_caps & IEEE80211_C_TDMA) == 0)
#endif
memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
} else if (vap->iv_opmode == IEEE80211_M_MBSS) {
ni->ni_meshidlen = vap->iv_mesh->ms_idlen;
memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen);
#endif
}
/*
* Fix the channel and related attributes.
*/
/* clear DFS CAC state on previous channel */
if (ic->ic_bsschan != IEEE80211_CHAN_ANYC &&
ic->ic_bsschan->ic_freq != chan->ic_freq &&
IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan))
ieee80211_dfs_cac_clear(ic, ic->ic_bsschan);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ic->ic_bsschan = chan;
ieee80211_node_set_chan(ni, chan);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ic->ic_curmode = ieee80211_chan2mode(chan);
/*
* Do mode-specific setup.
*/
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (IEEE80211_IS_CHAN_FULL(chan)) {
if (IEEE80211_IS_CHAN_ANYG(chan)) {
/*
* Use a mixed 11b/11g basic rate set.
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
*/
ieee80211_setbasicrates(&ni->ni_rates,
IEEE80211_MODE_11G);
if (vap->iv_flags & IEEE80211_F_PUREG) {
/*
* Also mark OFDM rates basic so 11b
* stations do not join (WiFi compliance).
*/
ieee80211_addbasicrates(&ni->ni_rates,
IEEE80211_MODE_11A);
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
} else if (IEEE80211_IS_CHAN_B(chan)) {
/*
* Force pure 11b rate set.
*/
ieee80211_setbasicrates(&ni->ni_rates,
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
IEEE80211_MODE_11B);
}
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
(void) ieee80211_sta_join1(ieee80211_ref_node(ni));
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*
* Reset bss state on transition to the INIT state.
* Clear any stations from the table (they have been
* deauth'd) and reset the bss node (clears key, rate
* etc. state).
*/
void
ieee80211_reset_bss(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni, *obss;
ieee80211_node_table_reset(&ic->ic_sta, vap);
/* XXX multi-bss: wrong */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ieee80211_reset_erp(ic);
ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
KASSERT(ni != NULL, ("unable to setup initial BSS node"));
obss = vap->iv_bss;
vap->iv_bss = ieee80211_ref_node(ni);
if (obss != NULL) {
copy_bss(ni, obss);
ni->ni_intval = ic->ic_bintval;
ieee80211_free_node(obss);
} else
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
static int
match_ssid(const struct ieee80211_node *ni,
int nssid, const struct ieee80211_scan_ssid ssids[])
{
int i;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
for (i = 0; i < nssid; i++) {
if (ni->ni_esslen == ssids[i].len &&
memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0)
return 1;
}
return 0;
}
/*
* Test a node for suitability/compatibility.
*/
static int
check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni)
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
{
struct ieee80211com *ic = ni->ni_ic;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
uint8_t rate;
if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
return 0;
if (vap->iv_opmode == IEEE80211_M_IBSS) {
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
return 0;
} else {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
return 0;
}
if (vap->iv_flags & IEEE80211_F_PRIVACY) {
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
return 0;
} else {
/* XXX does this mean privacy is supported or required? */
if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
return 0;
}
rate = ieee80211_fix_rate(ni, &ni->ni_rates,
IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE);
if (rate & IEEE80211_RATE_BASIC)
return 0;
if (vap->iv_des_nssid != 0 &&
!match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid))
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
return 0;
if ((vap->iv_flags & IEEE80211_F_DESBSSID) &&
!IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid))
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
return 0;
return 1;
}
#ifdef IEEE80211_DEBUG
/*
* Display node suitability/compatibility.
*/
static void
check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
uint8_t rate;
int fail;
fail = 0;
if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
fail |= 0x01;
if (vap->iv_opmode == IEEE80211_M_IBSS) {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
fail |= 0x02;
} else {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
fail |= 0x02;
}
if (vap->iv_flags & IEEE80211_F_PRIVACY) {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
fail |= 0x04;
} else {
/* XXX does this mean privacy is supported or required? */
if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
fail |= 0x04;
}
rate = ieee80211_fix_rate(ni, &ni->ni_rates,
IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE);
if (rate & IEEE80211_RATE_BASIC)
fail |= 0x08;
if (vap->iv_des_nssid != 0 &&
!match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid))
fail |= 0x10;
if ((vap->iv_flags & IEEE80211_F_DESBSSID) &&
!IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid))
fail |= 0x20;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr));
printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' ');
printf(" %3d%c",
ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' ');
printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2,
fail & 0x08 ? '!' : ' ');
printf(" %4s%c",
(ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" :
(ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" :
"????",
fail & 0x02 ? '!' : ' ');
printf(" %3s%c ",
(ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ? "wep" : "no",
fail & 0x04 ? '!' : ' ');
ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
printf("%s\n", fail & 0x10 ? "!" : "");
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#endif /* IEEE80211_DEBUG */
int
ieee80211_ibss_merge_check(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
if (ni == vap->iv_bss ||
IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
/* unchanged, nothing to do */
return 0;
}
if (!check_bss(vap, ni)) {
/* capabilities mismatch */
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: merge failed, capabilities mismatch\n", __func__);
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_assoc(vap))
check_bss_debug(vap, ni);
#endif
vap->iv_stats.is_ibss_capmismatch++;
return 0;
}
return 1;
}
/*
* Handle 802.11 ad hoc network merge. The
* convention, set by the Wireless Ethernet Compatibility Alliance
* (WECA), is that an 802.11 station will change its BSSID to match
* the "oldest" 802.11 ad hoc network, on the same channel, that
* has the station's desired SSID. The "oldest" 802.11 network
* sends beacons with the greatest TSF timestamp.
*
* The caller is assumed to validate TSF's before attempting a merge.
*
* Return !0 if the BSSID changed, 0 otherwise.
*/
int
ieee80211_ibss_merge(struct ieee80211_node *ni)
{
#ifdef IEEE80211_DEBUG
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
#endif
if (! ieee80211_ibss_merge_check(ni))
return 0;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: new bssid %s: %s preamble, %s slot time%s\n", __func__,
ether_sprintf(ni->ni_bssid),
ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long",
ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long",
ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : ""
);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
return ieee80211_sta_join1(ieee80211_ref_node(ni));
}
/*
* Calculate HT channel promotion flags for all vaps.
* This assumes ni_chan have been setup for each vap.
*/
static int
gethtadjustflags(struct ieee80211com *ic)
{
struct ieee80211vap *vap;
int flags;
flags = 0;
/* XXX locking */
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
if (vap->iv_state < IEEE80211_S_RUN)
continue;
switch (vap->iv_opmode) {
case IEEE80211_M_WDS:
case IEEE80211_M_STA:
case IEEE80211_M_AHDEMO:
case IEEE80211_M_HOSTAP:
case IEEE80211_M_IBSS:
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_M_MBSS:
flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan);
break;
default:
break;
}
}
return flags;
}
/*
* Check if the current channel needs to change based on whether
* any vap's are using HT20/HT40. This is used to sync the state
* of ic_curchan after a channel width change on a running vap.
*/
void
ieee80211_sync_curchan(struct ieee80211com *ic)
{
struct ieee80211_channel *c;
c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic));
if (c != ic->ic_curchan) {
ic->ic_curchan = c;
ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan);
ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
IEEE80211_UNLOCK(ic);
ic->ic_set_channel(ic);
ieee80211_radiotap_chan_change(ic);
IEEE80211_LOCK(ic);
}
}
/*
* Setup the current channel. The request channel may be
* promoted if other vap's are operating with HT20/HT40.
*/
void
ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c)
{
if (ic->ic_htcaps & IEEE80211_HTC_HT) {
int flags = gethtadjustflags(ic);
/*
* Check for channel promotion required to support the
* set of running vap's. This assumes we are called
* after ni_chan is setup for each vap.
*/
/* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */
if (flags > ieee80211_htchanflags(c))
c = ieee80211_ht_adjust_channel(ic, c, flags);
}
ic->ic_bsschan = ic->ic_curchan = c;
ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan);
ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
}
/*
* Change the current channel. The channel change is guaranteed to have
* happened before the next state change.
*/
void
ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c)
{
ieee80211_setupcurchan(ic, c);
ieee80211_runtask(ic, &ic->ic_chan_task);
}
void
ieee80211_update_chw(struct ieee80211com *ic)
{
ieee80211_setupcurchan(ic, ic->ic_curchan);
ieee80211_runtask(ic, &ic->ic_chw_task);
}
/*
* Join the specified IBSS/BSS network. The node is assumed to
* be passed in with a held reference.
*/
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
static int
ieee80211_sta_join1(struct ieee80211_node *selbs)
{
struct ieee80211vap *vap = selbs->ni_vap;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
struct ieee80211com *ic = selbs->ni_ic;
struct ieee80211_node *obss;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
int canreassoc;
/*
* Committed to selbs, setup state.
*/
obss = vap->iv_bss;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*
* Check if old+new node have the same address in which
* case we can reassociate when operating in sta mode.
*/
canreassoc = (obss != NULL &&
vap->iv_state == IEEE80211_S_RUN &&
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr));
vap->iv_bss = selbs; /* NB: caller assumed to bump refcnt */
if (obss != NULL) {
struct ieee80211_node_table *nt = obss->ni_table;
copy_bss(selbs, obss);
ieee80211_node_decref(obss); /* iv_bss reference */
IEEE80211_NODE_LOCK(nt);
node_reclaim(nt, obss); /* station table reference */
IEEE80211_NODE_UNLOCK(nt);
obss = NULL; /* NB: guard against later use */
}
/*
* Delete unusable rates; we've already checked
* that the negotiated rate set is acceptable.
*/
ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates,
IEEE80211_F_DODEL | IEEE80211_F_JOIN);
ieee80211_setcurchan(ic, selbs->ni_chan);
/*
* Set the erp state (mostly the slot time) to deal with
* the auto-select case; this should be redundant if the
* mode is locked.
*/
ieee80211_reset_erp(ic);
ieee80211_wme_initparams(vap);
if (vap->iv_opmode == IEEE80211_M_STA) {
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (canreassoc) {
/* Reassociate */
ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
} else {
/*
* Act as if we received a DEAUTH frame in case we
* are invoked from the RUN state. This will cause
* us to try to re-authenticate if we are operating
* as a station.
*/
ieee80211_new_state(vap, IEEE80211_S_AUTH,
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
IEEE80211_FC0_SUBTYPE_DEAUTH);
}
} else
ieee80211_new_state(vap, IEEE80211_S_RUN, -1);
return 1;
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
int
ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan,
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
const struct ieee80211_scan_entry *se)
{
struct ieee80211com *ic = vap->iv_ic;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
struct ieee80211_node *ni;
ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (ni == NULL) {
/* XXX msg */
return 0;
}
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*
* Expand scan state into node's format.
* XXX may not need all this stuff
*/
IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid);
ni->ni_esslen = se->se_ssid[1];
memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen);
ni->ni_tstamp.tsf = se->se_tstamp.tsf;
ni->ni_intval = se->se_intval;
ni->ni_capinfo = se->se_capinfo;
ni->ni_chan = chan;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_timoff = se->se_timoff;
ni->ni_fhdwell = se->se_fhdwell;
ni->ni_fhindex = se->se_fhindex;
ni->ni_erp = se->se_erp;
IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_noise = se->se_noise;
if (vap->iv_opmode == IEEE80211_M_STA) {
/* NB: only infrastructure mode requires an associd */
ni->ni_flags |= IEEE80211_NODE_ASSOCID;
}
if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) {
ieee80211_ies_expand(&ni->ni_ies);
#ifdef IEEE80211_SUPPORT_SUPERG
if (ni->ni_ies.ath_ie != NULL)
ieee80211_parse_ath(ni, ni->ni_ies.ath_ie);
#endif
if (ni->ni_ies.htcap_ie != NULL)
ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
if (ni->ni_ies.htinfo_ie != NULL)
ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
if (ni->ni_ies.meshid_ie != NULL)
ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie);
#endif
#ifdef IEEE80211_SUPPORT_TDMA
if (ni->ni_ies.tdma_ie != NULL)
ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie);
#endif
}
vap->iv_dtim_period = se->se_dtimperiod;
vap->iv_dtim_count = 0;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/* NB: must be after ni_chan is setup */
ieee80211_setup_rates(ni, se->se_rates, se->se_xrates,
IEEE80211_F_DOSORT);
if (ieee80211_iserp_rateset(&ni->ni_rates))
ni->ni_flags |= IEEE80211_NODE_ERP;
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
/*
* Setup HT state for this node if it's available, otherwise
* non-STA modes won't pick this state up.
*
* For IBSS and related modes that don't go through an
* association request/response, the only appropriate place
* to setup the HT state is here.
*/
if (ni->ni_ies.htinfo_ie != NULL &&
ni->ni_ies.htcap_ie != NULL &&
vap->iv_flags_ht & IEEE80211_FHT_HT) {
ieee80211_ht_node_init(ni);
ieee80211_ht_updateparams(ni,
ni->ni_ies.htcap_ie,
ni->ni_ies.htinfo_ie);
ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie,
IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie);
}
/* XXX else check for ath FF? */
/* XXX QoS? Difficult given that WME config is specific to a master */
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
return ieee80211_sta_join1(ieee80211_ref_node(ni));
}
/*
* Leave the specified IBSS/BSS network. The node is assumed to
* be passed in with a held reference.
*/
void
ieee80211_sta_leave(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
ic->ic_node_cleanup(ni);
ieee80211_notify_node_leave(ni);
}
/*
* Send a deauthenticate frame and drop the station.
*/
void
ieee80211_node_deauth(struct ieee80211_node *ni, int reason)
{
/* NB: bump the refcnt to be sure temporary nodes are not reclaimed */
ieee80211_ref_node(ni);
if (ni->ni_associd != 0)
IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason);
ieee80211_node_leave(ni);
ieee80211_free_node(ni);
}
static struct ieee80211_node *
node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211_node *ni;
ni = (struct ieee80211_node *) IEEE80211_MALLOC(sizeof(struct ieee80211_node),
M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
return ni;
}
/*
* Initialize an ie blob with the specified data. If previous
* data exists re-use the data block. As a side effect we clear
* all references to specific ie's; the caller is required to
* recalculate them.
*/
int
ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len)
{
/* NB: assumes data+len are the last fields */
memset(ies, 0, offsetof(struct ieee80211_ies, data));
if (ies->data != NULL && ies->len != len) {
/* data size changed */
IEEE80211_FREE(ies->data, M_80211_NODE_IE);
ies->data = NULL;
}
if (ies->data == NULL) {
ies->data = (uint8_t *) IEEE80211_MALLOC(len, M_80211_NODE_IE,
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
if (ies->data == NULL) {
ies->len = 0;
/* NB: pointers have already been zero'd above */
return 0;
}
}
memcpy(ies->data, data, len);
ies->len = len;
return 1;
}
/*
* Reclaim storage for an ie blob.
*/
void
ieee80211_ies_cleanup(struct ieee80211_ies *ies)
{
if (ies->data != NULL)
IEEE80211_FREE(ies->data, M_80211_NODE_IE);
}
/*
* Expand an ie blob data contents and to fillin individual
* ie pointers. The data blob is assumed to be well-formed;
* we don't do any validity checking of ie lengths.
*/
void
ieee80211_ies_expand(struct ieee80211_ies *ies)
{
uint8_t *ie;
int ielen;
ie = ies->data;
ielen = ies->len;
while (ielen > 0) {
switch (ie[0]) {
case IEEE80211_ELEMID_VENDOR:
if (iswpaoui(ie))
ies->wpa_ie = ie;
else if (iswmeoui(ie))
ies->wme_ie = ie;
#ifdef IEEE80211_SUPPORT_SUPERG
else if (isatherosoui(ie))
ies->ath_ie = ie;
#endif
#ifdef IEEE80211_SUPPORT_TDMA
else if (istdmaoui(ie))
ies->tdma_ie = ie;
#endif
break;
case IEEE80211_ELEMID_RSN:
ies->rsn_ie = ie;
break;
case IEEE80211_ELEMID_HTCAP:
ies->htcap_ie = ie;
break;
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
case IEEE80211_ELEMID_HTINFO:
ies->htinfo_ie = ie;
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
case IEEE80211_ELEMID_MESHID:
ies->meshid_ie = ie;
break;
#endif
}
ielen -= 2 + ie[1];
ie += 2 + ie[1];
}
}
/*
* Reclaim any resources in a node and reset any critical
* state. Typically nodes are free'd immediately after,
* but in some cases the storage may be reused so we need
* to insure consistent state (should probably fix that).
*/
static void
node_cleanup(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
int i;
/* NB: preserve ni_table */
if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) {
if (vap->iv_opmode != IEEE80211_M_STA)
vap->iv_ps_sta--;
ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT;
IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni,
"power save mode off, %u sta's in ps mode", vap->iv_ps_sta);
}
/*
* Cleanup any HT-related state.
*/
if (ni->ni_flags & IEEE80211_NODE_HT)
ieee80211_ht_node_cleanup(ni);
#ifdef IEEE80211_SUPPORT_SUPERG
[net80211] Initial A-MSDU support for testing / evaluation A-MSDU is another 11n aggregation mechanism where multiple ethernet frames get LLC encapsulated (so they have a length field), padded, and put in a single MPDU (802.11 MAC frame.) This means it gets sent out as a single frame, with a single seqno, it's acked as one frame, etc. It turns out that, hah, atheros fast frames is almost but not quite like this, so I'm reusing all of the current superg/fast-frames stuff in order to actually transmit A-MSDU. Yes, this means that A-MSDU frames are also only aggregated two at a time, so it's not necessarily a huge win, but it's better than nothing. This doesn't do anything by default - the driver needs to say it does A-MSDU as well as set the AMSDU software TX capability so this code path gets exercised. For now, the only driver that enables this is urtwn. I'll enable it for rsu at some point soon. Tested: * Add an amsdu encap path to aggregate two frames, same as the fast-frames path. * Always do the superg init/teardown and node init/teardown stuff, regardless of whether the nodes are doing fast-frames (the ATH capability stuff.) That way we can reuse it for amsdu. * Don't do AMSDU for multicast/broadcast and EAPOL frames. * If we're doing A-MPDU, then don't bother doing FF/A-MSDU. We can likely do both together, but I don't want to change behaviour. * Teach the fast frames approx txtime logic to support the 11n rates. But, since we don't currently have a full "current rate" support, assume it's HT20, long-gi, etc. That way we overshoot on the TX time estimation, so we're always inside the requirements. (And we only aggregate two frames for now, so we're not really going to exceed that.) * Drop the maximum FF age default down to 2ms, otherwise we end up with some very annoyingly large latencies. TODO: * We only aggregate two ethernet frames, so I'm not checking the max A-MSDU size. But when it comes time to support >2 frames, we should obey that. Tested: * urtwn(4)
2016-04-06 01:21:51 +00:00
/* Always do FF node cleanup; for A-MSDU */
ieee80211_ff_node_cleanup(ni);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#endif
#ifdef IEEE80211_SUPPORT_MESH
/*
* Cleanup any mesh-related state.
*/
if (vap->iv_opmode == IEEE80211_M_MBSS)
ieee80211_mesh_node_cleanup(ni);
#endif
/*
* Clear any staging queue entries.
*/
ieee80211_ageq_drain_node(&ic->ic_stageq, ni);
/*
* Clear AREF flag that marks the authorization refcnt bump
* has happened. This is probably not needed as the node
* should always be removed from the table so not found but
* do it just in case.
* Likewise clear the ASSOCID flag as these flags are intended
* to be managed in tandem.
*/
ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID);
/*
* Drain power save queue and, if needed, clear TIM.
*/
if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL)
vap->iv_set_tim(ni, 0);
ni->ni_associd = 0;
if (ni->ni_challenge != NULL) {
IEEE80211_FREE(ni->ni_challenge, M_80211_NODE);
ni->ni_challenge = NULL;
}
/*
* Preserve SSID, WPA, and WME ie's so the bss node is
* reusable during a re-auth/re-assoc state transition.
* If we remove these data they will not be recreated
* because they come from a probe-response or beacon frame
* which cannot be expected prior to the association-response.
* This should not be an issue when operating in other modes
* as stations leaving always go through a full state transition
* which will rebuild this state.
*
* XXX does this leave us open to inheriting old state?
*/
for (i = 0; i < nitems(ni->ni_rxfrag); i++)
if (ni->ni_rxfrag[i] != NULL) {
m_freem(ni->ni_rxfrag[i]);
ni->ni_rxfrag[i] = NULL;
}
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
/*
* Must be careful here to remove any key map entry w/o a LOR.
*/
ieee80211_node_delucastkey(ni);
}
static void
node_free(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
ieee80211_ratectl_node_deinit(ni);
ic->ic_node_cleanup(ni);
ieee80211_ies_cleanup(&ni->ni_ies);
ieee80211_psq_cleanup(&ni->ni_psq);
IEEE80211_FREE(ni, M_80211_NODE);
}
static void
node_age(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
/*
* Age frames on the power save queue.
*/
if (ieee80211_node_psq_age(ni) != 0 &&
ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL)
vap->iv_set_tim(ni, 0);
/*
* Age out HT resources (e.g. frames on the
* A-MPDU reorder queues).
*/
if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT))
ieee80211_ht_node_age(ni);
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
static int8_t
node_getrssi(const struct ieee80211_node *ni)
{
uint32_t avgrssi = ni->ni_avgrssi;
int32_t rssi;
if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER)
return 0;
rssi = IEEE80211_RSSI_GET(avgrssi);
return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi;
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
static void
node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise)
{
*rssi = node_getrssi(ni);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
*noise = ni->ni_noise;
}
static void
node_getmimoinfo(const struct ieee80211_node *ni,
struct ieee80211_mimo_info *info)
{
int i;
uint32_t avgrssi;
int32_t rssi;
bzero(info, sizeof(*info));
for (i = 0; i < ni->ni_mimo_chains; i++) {
avgrssi = ni->ni_mimo_rssi_ctl[i];
if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) {
info->rssi[i] = 0;
} else {
rssi = IEEE80211_RSSI_GET(avgrssi);
info->rssi[i] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi;
}
info->noise[i] = ni->ni_mimo_noise_ctl[i];
}
/* XXX ext radios? */
/* XXX EVM? */
}
struct ieee80211_node *
ieee80211_alloc_node(struct ieee80211_node_table *nt,
struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = nt->nt_ic;
struct ieee80211_node *ni;
int hash;
ni = ic->ic_node_alloc(vap, macaddr);
if (ni == NULL) {
vap->iv_stats.is_rx_nodealloc++;
return NULL;
}
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"%s %p<%s> in %s table\n", __func__, ni,
ether_sprintf(macaddr), nt->nt_name);
IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
hash = IEEE80211_NODE_HASH(ic, macaddr);
ieee80211_node_initref(ni); /* mark referenced */
ni->ni_chan = IEEE80211_CHAN_ANYC;
ni->ni_authmode = IEEE80211_AUTH_OPEN;
ni->ni_txpower = ic->ic_txpowlimit; /* max power */
ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE);
ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER;
ni->ni_inact_reload = nt->nt_inact_init;
ni->ni_inact = ni->ni_inact_reload;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_ath_defkeyix = 0x7fff;
ieee80211_psq_init(&ni->ni_psq, "unknown");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
if (vap->iv_opmode == IEEE80211_M_MBSS)
ieee80211_mesh_node_init(vap, ni);
#endif
IEEE80211_NODE_LOCK(nt);
TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list);
LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash);
ni->ni_table = nt;
ni->ni_vap = vap;
ni->ni_ic = ic;
IEEE80211_NODE_UNLOCK(nt);
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact_reload %u", __func__, ni->ni_inact_reload);
ieee80211_ratectl_node_init(ni);
return ni;
}
/*
* Craft a temporary node suitable for sending a management frame
* to the specified station. We craft only as much state as we
* need to do the work since the node will be immediately reclaimed
* once the send completes.
*/
struct ieee80211_node *
ieee80211_tmp_node(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
ni = ic->ic_node_alloc(vap, macaddr);
if (ni != NULL) {
struct ieee80211_node *bss = vap->iv_bss;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr));
ni->ni_table = NULL; /* NB: pedantic */
ni->ni_ic = ic; /* NB: needed to set channel */
ni->ni_vap = vap;
IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid);
ieee80211_node_initref(ni); /* mark referenced */
/* NB: required by ieee80211_fix_rate */
ieee80211_node_set_chan(ni, bss->ni_chan);
ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey,
IEEE80211_KEYIX_NONE);
ni->ni_txpower = bss->ni_txpower;
/* XXX optimize away */
ieee80211_psq_init(&ni->ni_psq, "unknown");
ieee80211_ratectl_node_init(ni);
} else {
/* XXX msg */
vap->iv_stats.is_rx_nodealloc++;
}
return ni;
}
struct ieee80211_node *
ieee80211_dup_bss(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr);
if (ni != NULL) {
struct ieee80211_node *bss = vap->iv_bss;
/*
* Inherit from iv_bss.
*/
copy_bss(ni, bss);
IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid);
ieee80211_node_set_chan(ni, bss->ni_chan);
}
return ni;
}
/*
* Create a bss node for a legacy WDS vap. The far end does
* not associate so we just create create a new node and
* simulate an association. The caller is responsible for
* installing the node as the bss node and handling any further
* setup work like authorizing the port.
*/
struct ieee80211_node *
ieee80211_node_create_wds(struct ieee80211vap *vap,
const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
/* XXX check if node already in sta table? */
ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid);
if (ni != NULL) {
ni->ni_wdsvap = vap;
IEEE80211_ADDR_COPY(ni->ni_bssid, bssid);
/*
* Inherit any manually configured settings.
*/
copy_bss(ni, vap->iv_bss);
ieee80211_node_set_chan(ni, chan);
/* NB: propagate ssid so available to WPA supplicant */
ni->ni_esslen = vap->iv_des_ssid[0].len;
memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen);
/* NB: no associd for peer */
/*
* There are no management frames to use to
* discover neighbor capabilities, so blindly
* propagate the local configuration.
*/
if (vap->iv_flags & IEEE80211_F_WME)
ni->ni_flags |= IEEE80211_NODE_QOS;
#ifdef IEEE80211_SUPPORT_SUPERG
if (vap->iv_flags & IEEE80211_F_FF)
ni->ni_flags |= IEEE80211_NODE_FF;
#endif
if ((ic->ic_htcaps & IEEE80211_HTC_HT) &&
(vap->iv_flags_ht & IEEE80211_FHT_HT)) {
/*
* Device is HT-capable and HT is enabled for
* the vap; setup HT operation. On return
* ni_chan will be adjusted to an HT channel.
*/
ieee80211_ht_wds_init(ni);
} else {
struct ieee80211_channel *c = ni->ni_chan;
/*
* Force a legacy channel to be used.
*/
c = ieee80211_find_channel(ic,
c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT);
KASSERT(c != NULL, ("no legacy channel, %u/%x",
ni->ni_chan->ic_freq, ni->ni_chan->ic_flags));
ni->ni_chan = c;
}
}
return ni;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_node_locked_debug(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_node_locked(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
int hash;
IEEE80211_NODE_LOCK_ASSERT(nt);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
ieee80211_ref_node(ni); /* mark referenced */
#ifdef IEEE80211_DEBUG_REFCNT
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s (%s:%u) %p<%s> refcnt %d\n", __func__,
func, line,
ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni));
#endif
return ni;
}
}
return NULL;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_node_debug(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_node(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
ni = ieee80211_find_node_locked(nt, macaddr);
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_vap_node_locked_debug(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
int hash;
IEEE80211_NODE_LOCK_ASSERT(nt);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
if (ni->ni_vap == vap &&
IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
ieee80211_ref_node(ni); /* mark referenced */
#ifdef IEEE80211_DEBUG_REFCNT
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s (%s:%u) %p<%s> refcnt %d\n", __func__,
func, line,
ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni));
#endif
return ni;
}
}
return NULL;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_vap_node_debug(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_vap_node(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
ni = ieee80211_find_vap_node_locked(nt, vap, macaddr);
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
/*
* Fake up a node; this handles node discovery in adhoc mode.
* Note that for the driver's benefit we we treat this like
* an association so the driver has an opportunity to setup
* it's private state.
*/
struct ieee80211_node *
ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap,
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211_node *ni;
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC,
"%s: mac<%s>\n", __func__, ether_sprintf(macaddr));
ni = ieee80211_dup_bss(vap, macaddr);
if (ni != NULL) {
struct ieee80211com *ic = vap->iv_ic;
/* XXX no rate negotiation; just dup */
ni->ni_rates = vap->iv_bss->ni_rates;
if (ieee80211_iserp_rateset(&ni->ni_rates))
ni->ni_flags |= IEEE80211_NODE_ERP;
if (vap->iv_opmode == IEEE80211_M_AHDEMO) {
/*
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
* In adhoc demo mode there are no management
* frames to use to discover neighbor capabilities,
* so blindly propagate the local configuration
* so we can do interesting things (e.g. use
* WME to disable ACK's).
*/
if (vap->iv_flags & IEEE80211_F_WME)
ni->ni_flags |= IEEE80211_NODE_QOS;
#ifdef IEEE80211_SUPPORT_SUPERG
if (vap->iv_flags & IEEE80211_F_FF)
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_flags |= IEEE80211_NODE_FF;
#endif
}
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
if (ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, 1);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/* XXX not right for 802.1x/WPA */
ieee80211_node_authorize(ni);
}
return ni;
}
void
ieee80211_init_neighbor(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const struct ieee80211_scanparams *sp)
{
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
int do_ht_setup = 0;
ni->ni_esslen = sp->ssid[1];
memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]);
IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3);
memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp));
ni->ni_intval = sp->bintval;
ni->ni_capinfo = sp->capinfo;
ni->ni_chan = ni->ni_ic->ic_curchan;
ni->ni_fhdwell = sp->fhdwell;
ni->ni_fhindex = sp->fhindex;
ni->ni_erp = sp->erp;
ni->ni_timoff = sp->timoff;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS)
ieee80211_mesh_init_neighbor(ni, wh, sp);
#endif
if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) {
ieee80211_ies_expand(&ni->ni_ies);
if (ni->ni_ies.wme_ie != NULL)
ni->ni_flags |= IEEE80211_NODE_QOS;
else
ni->ni_flags &= ~IEEE80211_NODE_QOS;
#ifdef IEEE80211_SUPPORT_SUPERG
if (ni->ni_ies.ath_ie != NULL)
ieee80211_parse_ath(ni, ni->ni_ies.ath_ie);
#endif
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
if (ni->ni_ies.htcap_ie != NULL)
ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
if (ni->ni_ies.htinfo_ie != NULL)
ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
if ((ni->ni_ies.htcap_ie != NULL) &&
(ni->ni_ies.htinfo_ie != NULL) &&
(ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) {
do_ht_setup = 1;
}
}
/* NB: must be after ni_chan is setup */
ieee80211_setup_rates(ni, sp->rates, sp->xrates,
IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE |
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
/*
* If the neighbor is HT compatible, flip that on.
*/
if (do_ht_setup) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
"%s: doing HT setup\n", __func__);
ieee80211_ht_node_init(ni);
ieee80211_ht_updateparams(ni,
ni->ni_ies.htcap_ie,
ni->ni_ies.htinfo_ie);
ieee80211_setup_htrates(ni,
ni->ni_ies.htcap_ie,
IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
ieee80211_setup_basic_htrates(ni,
ni->ni_ies.htinfo_ie);
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
}
}
/*
* Do node discovery in adhoc mode on receipt of a beacon
* or probe response frame. Note that for the driver's
* benefit we we treat this like an association so the
* driver has an opportunity to setup it's private state.
*/
struct ieee80211_node *
ieee80211_add_neighbor(struct ieee80211vap *vap,
const struct ieee80211_frame *wh,
const struct ieee80211_scanparams *sp)
{
struct ieee80211_node *ni;
Initial cut at making IBSS support 802.11n aware. * Add HTINFO field decoding to ieee80211_ies_expand() - it's likely not 100% correct as it's not looking at the draft 11n HTINFO location, but I don't think anyone will care. * When doing an IBSS join make sure the 11n channel configuration is used - otherwise the 11a/11bg channel will be used and there won't be any chance for an upgrade to 11n. * When creating an IBSS network, ensure the channel is updated to an 11n channel so other 11n nodes can see it and speak to it with MCS rates. * Add a bit of code that's disabled for now which handles the HT field updating. This won't work out very well with lots of adhoc nodes as we'd end up ping-ponging between the HT configuration for each node. Instead, we should likely only pay attention to the "master" node we initially associated against and then ensure we propagate that information forward in our subsequent beacons. However, due to the nature of IBSS (ie, there's no specific "master" node in the specification) it's unclear which node we should lift the HT parameters from. So for now this assumes the HT parameters are squirreled away in the initial beacon/probe response. So there's some trickiness here. With ap/sta pairing, the probe response just populates a legacy node and the association request/response is what is used for negotiation 11n-ness (and upgrading things as needed.) With ibss networks, the pairing is done with probe request/response, with discovery being done by creating nodes when new beacons in the IBSS / BSSID are heard. There's no assoc request/response frames going on. So the trick here has been to figure out where to upgrade things. I don't like how I just taught ieee80211_sta_join() to "speak" HT - I'd rather there be an upgrade path when an IBSS node joins and there are HT parameters present. Once I've done that, I'll kill this HT special casing that's going on in ieee80211_sta_join(). Tested: * AR9280, AR5416, AR5212 - basic iperf and ping interoperability tests whilst in a non-encrypted adhoc network. TODO: * Fix up the HT upgrade path for IBSS nodes rather than adding code in ieee80211_sta_join(), then remove my code from there. * When associating, there's a concept of a "master" node in the IBSS which is the node you first joined the network through. It's possible the correct thing to do is to listen to HT updates and configure WME parameters from that node. However, once that node goes away, which node(s) should be listened to for configuration changes? For things like HT channel width, it's likely going to be ok to just associate as HT40 and then use the per-neighbor rate control and HTINFO/HTCAP fields to figure out which rates and configuration to speak. Ie, for a 20MHz 11n node, just speak 20MHz rates to it. It shouldn't "change", like what goes on in AP/STA configurations.
2013-01-26 00:37:54 +00:00
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2));
ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */
if (ni != NULL) {
struct ieee80211com *ic = vap->iv_ic;
ieee80211_init_neighbor(ni, wh, sp);
if (ieee80211_iserp_rateset(&ni->ni_rates))
ni->ni_flags |= IEEE80211_NODE_ERP;
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
if (ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, 1);
/* XXX not right for 802.1x/WPA */
ieee80211_node_authorize(ni);
}
return ni;
}
#define IS_PROBEREQ(wh) \
((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \
== (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ))
#define IS_BCAST_PROBEREQ(wh) \
(IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \
((const struct ieee80211_frame *)(wh))->i_addr3))
static __inline struct ieee80211_node *
_find_rxnode(struct ieee80211_node_table *nt,
const struct ieee80211_frame_min *wh)
{
if (IS_BCAST_PROBEREQ(wh))
return NULL; /* spam bcast probe req to all vap's */
return ieee80211_find_node_locked(nt, wh->i_addr2);
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*
* Locate the node for sender, track state, and then pass the
* (referenced) node up to the 802.11 layer for its use. Note
* we can return NULL if the sender is not in the table.
*/
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_rxnode_debug(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh, const char *func, int line)
#else
ieee80211_find_rxnode(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh)
#endif
{
struct ieee80211_node_table *nt;
struct ieee80211_node *ni;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
nt = &ic->ic_sta;
IEEE80211_NODE_LOCK(nt);
ni = _find_rxnode(nt, wh);
IEEE80211_NODE_UNLOCK(nt);
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
return ni;
}
/*
* Like ieee80211_find_rxnode but use the supplied h/w
* key index as a hint to locate the node in the key
* mapping table. If an entry is present at the key
* index we return it; otherwise do a normal lookup and
* update the mapping table if the station has a unicast
* key assigned to it.
*/
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_rxnode_withkey_debug(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh, ieee80211_keyix keyix,
const char *func, int line)
#else
ieee80211_find_rxnode_withkey(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh, ieee80211_keyix keyix)
#endif
{
struct ieee80211_node_table *nt;
struct ieee80211_node *ni;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
nt = &ic->ic_sta;
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
IEEE80211_NODE_LOCK(nt);
if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax)
ni = nt->nt_keyixmap[keyix];
else
ni = NULL;
if (ni == NULL) {
ni = _find_rxnode(nt, wh);
if (ni != NULL && nt->nt_keyixmap != NULL) {
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
/*
* If the station has a unicast key cache slot
* assigned update the key->node mapping table.
*/
keyix = ni->ni_ucastkey.wk_rxkeyix;
/* XXX can keyixmap[keyix] != NULL? */
if (keyix < nt->nt_keyixmax &&
nt->nt_keyixmap[keyix] == NULL) {
IEEE80211_DPRINTF(ni->ni_vap,
IEEE80211_MSG_NODE,
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
"%s: add key map entry %p<%s> refcnt %d\n",
__func__, ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni)+1);
nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni);
}
}
} else {
if (IS_BCAST_PROBEREQ(wh))
ni = NULL; /* spam bcast probe req to all vap's */
else
ieee80211_ref_node(ni);
}
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
#undef IS_BCAST_PROBEREQ
#undef IS_PROBEREQ
/*
* Return a reference to the appropriate node for sending
* a data frame. This handles node discovery in adhoc networks.
*/
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_txnode_debug(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
const char *func, int line)
#else
ieee80211_find_txnode(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta;
struct ieee80211_node *ni;
/*
* The destination address should be in the node table
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
* unless this is a multicast/broadcast frame. We can
* also optimize station mode operation, all frames go
* to the bss node.
*/
/* XXX can't hold lock across dup_bss 'cuz of recursive locking */
IEEE80211_NODE_LOCK(nt);
if (vap->iv_opmode == IEEE80211_M_STA ||
vap->iv_opmode == IEEE80211_M_WDS ||
IEEE80211_IS_MULTICAST(macaddr))
ni = ieee80211_ref_node(vap->iv_bss);
else
ni = ieee80211_find_node_locked(nt, macaddr);
IEEE80211_NODE_UNLOCK(nt);
if (ni == NULL) {
if (vap->iv_opmode == IEEE80211_M_IBSS ||
vap->iv_opmode == IEEE80211_M_AHDEMO) {
/*
* In adhoc mode cons up a node for the destination.
* Note that we need an additional reference for the
* caller to be consistent with
* ieee80211_find_node_locked.
*/
ni = ieee80211_fakeup_adhoc_node(vap, macaddr);
if (ni != NULL)
(void) ieee80211_ref_node(ni);
} else {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr,
"no node, discard frame (%s)", __func__);
vap->iv_stats.is_tx_nonode++;
}
}
return ni;
}
static void
_ieee80211_free_node(struct ieee80211_node *ni)
{
struct ieee80211_node_table *nt = ni->ni_table;
/*
* NB: careful about referencing the vap as it may be
* gone if the last reference was held by a driver.
* We know the com will always be present so it's safe
* to use ni_ic below to reclaim resources.
*/
#if 0
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"%s %p<%s> in %s table\n", __func__, ni,
ether_sprintf(ni->ni_macaddr),
nt != NULL ? nt->nt_name : "<gone>");
#endif
if (ni->ni_associd != 0) {
struct ieee80211vap *vap = ni->ni_vap;
if (vap->iv_aid_bitmap != NULL)
IEEE80211_AID_CLR(vap, ni->ni_associd);
}
if (nt != NULL) {
TAILQ_REMOVE(&nt->nt_node, ni, ni_list);
LIST_REMOVE(ni, ni_hash);
}
ni->ni_ic->ic_node_free(ni);
}
/*
* Clear any entry in the unicast key mapping table.
*/
static int
node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
{
ieee80211_keyix keyix;
keyix = ni->ni_ucastkey.wk_rxkeyix;
if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax &&
nt->nt_keyixmap[keyix] == ni) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s: %p<%s> clear key map entry %u\n",
__func__, ni, ether_sprintf(ni->ni_macaddr), keyix);
nt->nt_keyixmap[keyix] = NULL;
ieee80211_node_decref(ni);
return 1;
}
return 0;
}
void
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_free_node_debug(struct ieee80211_node *ni, const char *func, int line)
#else
ieee80211_free_node(struct ieee80211_node *ni)
#endif
{
struct ieee80211_node_table *nt = ni->ni_table;
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
#ifdef IEEE80211_DEBUG_REFCNT
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni,
ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1);
#endif
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
if (nt != NULL) {
IEEE80211_NODE_LOCK(nt);
if (ieee80211_node_dectestref(ni)) {
/*
* Last reference, reclaim state.
*/
_ieee80211_free_node(ni);
} else if (ieee80211_node_refcnt(ni) == 1)
if (node_clear_keyixmap(nt, ni))
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
_ieee80211_free_node(ni);
IEEE80211_NODE_UNLOCK(nt);
} else {
if (ieee80211_node_dectestref(ni))
_ieee80211_free_node(ni);
}
}
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
/*
* Reclaim a unicast key and clear any key cache state.
*/
int
ieee80211_node_delucastkey(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_node_table *nt = &ic->ic_sta;
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
struct ieee80211_node *nikey;
ieee80211_keyix keyix;
int isowned, status;
/*
* NB: We must beware of LOR here; deleting the key
* can cause the crypto layer to block traffic updates
* which can generate a LOR against the node table lock;
* grab it here and stash the key index for our use below.
*
* Must also beware of recursion on the node table lock.
* When called from node_cleanup we may already have
* the node table lock held. Unfortunately there's no
* way to separate out this path so we must do this
* conditionally.
*/
isowned = IEEE80211_NODE_IS_LOCKED(nt);
if (!isowned)
IEEE80211_NODE_LOCK(nt);
nikey = NULL;
status = 1; /* NB: success */
if (ni->ni_ucastkey.wk_keyix != IEEE80211_KEYIX_NONE) {
keyix = ni->ni_ucastkey.wk_rxkeyix;
status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey);
if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) {
nikey = nt->nt_keyixmap[keyix];
nt->nt_keyixmap[keyix] = NULL;
}
}
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
if (!isowned)
IEEE80211_NODE_UNLOCK(nt);
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
if (nikey != NULL) {
KASSERT(nikey == ni,
("key map out of sync, ni %p nikey %p", ni, nikey));
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
"%s: delete key map entry %p<%s> refcnt %d\n",
__func__, ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni)-1);
ieee80211_free_node(ni);
}
return status;
}
/*
* Reclaim a node. If this is the last reference count then
* do the normal free work. Otherwise remove it from the node
* table and mark it gone by clearing the back-reference.
*/
static void
node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
{
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
IEEE80211_NODE_LOCK_ASSERT(nt);
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s: remove %p<%s> from %s table, refcnt %d\n",
__func__, ni, ether_sprintf(ni->ni_macaddr),
nt->nt_name, ieee80211_node_refcnt(ni)-1);
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
/*
* Clear any entry in the unicast key mapping table.
* We need to do it here so rx lookups don't find it
* in the mapping table even if it's not in the hash
* table. We cannot depend on the mapping table entry
* being cleared because the node may not be free'd.
*/
(void)node_clear_keyixmap(nt, ni);
if (!ieee80211_node_dectestref(ni)) {
/*
* Other references are present, just remove the
* node from the table so it cannot be found. When
* the references are dropped storage will be
* reclaimed.
*/
TAILQ_REMOVE(&nt->nt_node, ni, ni_list);
LIST_REMOVE(ni, ni_hash);
ni->ni_table = NULL; /* clear reference */
} else
_ieee80211_free_node(ni);
}
/*
* Node table support.
*/
static void
ieee80211_node_table_init(struct ieee80211com *ic,
struct ieee80211_node_table *nt,
const char *name, int inact, int keyixmax)
{
nt->nt_ic = ic;
IEEE80211_NODE_LOCK_INIT(nt, ic->ic_name);
TAILQ_INIT(&nt->nt_node);
nt->nt_name = name;
nt->nt_inact_init = inact;
nt->nt_keyixmax = keyixmax;
if (nt->nt_keyixmax > 0) {
nt->nt_keyixmap = (struct ieee80211_node **) IEEE80211_MALLOC(
keyixmax * sizeof(struct ieee80211_node *),
M_80211_NODE,
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
if (nt->nt_keyixmap == NULL)
ic_printf(ic,
"Cannot allocate key index map with %u entries\n",
keyixmax);
} else
nt->nt_keyixmap = NULL;
}
static void
ieee80211_node_table_reset(struct ieee80211_node_table *nt,
struct ieee80211vap *match)
{
struct ieee80211_node *ni, *next;
IEEE80211_NODE_LOCK(nt);
TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) {
if (match != NULL && ni->ni_vap != match)
continue;
/* XXX can this happen? if so need's work */
if (ni->ni_associd != 0) {
struct ieee80211vap *vap = ni->ni_vap;
if (vap->iv_auth->ia_node_leave != NULL)
vap->iv_auth->ia_node_leave(ni);
if (vap->iv_aid_bitmap != NULL)
IEEE80211_AID_CLR(vap, ni->ni_associd);
}
ni->ni_wdsvap = NULL; /* clear reference */
node_reclaim(nt, ni);
}
if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) {
/*
* Make a separate pass to clear references to this vap
* held by DWDS entries. They will not be matched above
* because ni_vap will point to the ap vap but we still
* need to clear ni_wdsvap when the WDS vap is destroyed
* and/or reset.
*/
TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next)
if (ni->ni_wdsvap == match)
ni->ni_wdsvap = NULL;
}
IEEE80211_NODE_UNLOCK(nt);
}
static void
ieee80211_node_table_cleanup(struct ieee80211_node_table *nt)
{
ieee80211_node_table_reset(nt, NULL);
if (nt->nt_keyixmap != NULL) {
#ifdef DIAGNOSTIC
/* XXX verify all entries are NULL */
int i;
for (i = 0; i < nt->nt_keyixmax; i++)
if (nt->nt_keyixmap[i] != NULL)
printf("%s: %s[%u] still active\n", __func__,
nt->nt_name, i);
#endif
IEEE80211_FREE(nt->nt_keyixmap, M_80211_NODE);
nt->nt_keyixmap = NULL;
}
IEEE80211_NODE_LOCK_DESTROY(nt);
}
static void
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
timeout_stations(void *arg __unused, struct ieee80211_node *ni)
{
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
/*
* Only process stations when in RUN state. This
* insures, for example, that we don't timeout an
* inactive station during CAC. Note that CSA state
* is actually handled in ieee80211_node_timeout as
* it applies to more than timeout processing.
*/
if (vap->iv_state != IEEE80211_S_RUN)
return;
/*
* Ignore entries for which have yet to receive an
* authentication frame. These are transient and
* will be reclaimed when the last reference to them
* goes away (when frame xmits complete).
*/
if ((vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_STA) &&
(ni->ni_flags & IEEE80211_NODE_AREF) == 0)
return;
/*
* Free fragment if not needed anymore
* (last fragment older than 1s).
* XXX doesn't belong here, move to node_age
*/
if (ni->ni_rxfrag[0] != NULL &&
ticks > ni->ni_rxfragstamp + hz) {
m_freem(ni->ni_rxfrag[0]);
ni->ni_rxfrag[0] = NULL;
}
if (ni->ni_inact > 0) {
ni->ni_inact--;
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact %u inact_reload %u nrates %u",
__func__, ni->ni_inact, ni->ni_inact_reload,
ni->ni_rates.rs_nrates);
}
/*
* Special case ourself; we may be idle for extended periods
* of time and regardless reclaiming our state is wrong.
* XXX run ic_node_age
*/
/* XXX before inact decrement? */
if (ni == vap->iv_bss)
return;
if (ni->ni_associd != 0 ||
(vap->iv_opmode == IEEE80211_M_IBSS ||
vap->iv_opmode == IEEE80211_M_AHDEMO)) {
/*
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
* Age/drain resources held by the station.
*/
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
ic->ic_node_age(ni);
/*
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
* Probe the station before time it out. We
* send a null data frame which may not be
* universally supported by drivers (need it
* for ps-poll support so it should be...).
*
* XXX don't probe the station unless we've
* received a frame from them (and have
* some idea of the rates they are capable
* of); this will get fixed more properly
* soon with better handling of the rate set.
*/
if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) &&
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
(0 < ni->ni_inact &&
ni->ni_inact <= vap->iv_inact_probe) &&
ni->ni_rates.rs_nrates != 0) {
IEEE80211_NOTE(vap,
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
IEEE80211_MSG_INACT | IEEE80211_MSG_NODE,
ni, "%s",
"probe station due to inactivity");
/*
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
* Grab a reference so the node cannot
* be reclaimed before we send the frame.
* ieee80211_send_nulldata understands
* we've done this and reclaims the
* ref for us as needed.
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
*/
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
/* XXX fix this (not required anymore). */
ieee80211_ref_node(ni);
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
/* XXX useless */
ieee80211_send_nulldata(ni);
/* XXX stat? */
return;
}
}
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) &&
ni->ni_inact <= 0) {
IEEE80211_NOTE(vap,
IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni,
"station timed out due to inactivity "
"(refcnt %u)", ieee80211_node_refcnt(ni));
/*
* Send a deauthenticate frame and drop the station.
* This is somewhat complicated due to reference counts
* and locking. At this point a station will typically
* have a reference count of 2. ieee80211_node_leave
* will do a "free" of the node which will drop the
* reference count. But in the meantime a reference
* wil be held by the deauth frame. The actual reclaim
* of the node will happen either after the tx is
* completed or by ieee80211_node_leave.
*/
if (ni->ni_associd != 0) {
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_DEAUTH,
IEEE80211_REASON_AUTH_EXPIRE);
}
ieee80211_node_leave(ni);
vap->iv_stats.is_node_timeout++;
}
}
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
/*
* Timeout inactive stations and do related housekeeping.
*/
static void
ieee80211_timeout_stations(struct ieee80211com *ic)
{
struct ieee80211_node_table *nt = &ic->ic_sta;
ieee80211_iterate_nodes(nt, timeout_stations, NULL);
}
/*
* Aggressively reclaim resources. This should be used
* only in a critical situation to reclaim mbuf resources.
*/
void
ieee80211_drain(struct ieee80211com *ic)
{
struct ieee80211_node_table *nt = &ic->ic_sta;
struct ieee80211vap *vap;
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
/*
* Ignore entries for which have yet to receive an
* authentication frame. These are transient and
* will be reclaimed when the last reference to them
* goes away (when frame xmits complete).
*/
vap = ni->ni_vap;
/*
* Only process stations when in RUN state. This
* insures, for example, that we don't timeout an
* inactive station during CAC. Note that CSA state
* is actually handled in ieee80211_node_timeout as
* it applies to more than timeout processing.
*/
if (vap->iv_state != IEEE80211_S_RUN)
continue;
/* XXX can vap be NULL? */
if ((vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_STA) &&
(ni->ni_flags & IEEE80211_NODE_AREF) == 0)
continue;
/*
* Free fragments.
* XXX doesn't belong here, move to node_drain
*/
if (ni->ni_rxfrag[0] != NULL) {
m_freem(ni->ni_rxfrag[0]);
ni->ni_rxfrag[0] = NULL;
}
/*
* Drain resources held by the station.
*/
ic->ic_node_drain(ni);
}
IEEE80211_NODE_UNLOCK(nt);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
}
/*
* Per-ieee80211com inactivity timer callback.
*/
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
void
ieee80211_node_timeout(void *arg)
{
struct ieee80211com *ic = arg;
/*
* Defer timeout processing if a channel switch is pending.
* We typically need to be mute so not doing things that
* might generate frames is good to handle in one place.
* Suppressing the station timeout processing may extend the
* lifetime of inactive stations (by not decrementing their
* idle counters) but this should be ok unless the CSA is
* active for an unusually long time.
*/
if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) {
ieee80211_scan_timeout(ic);
ieee80211_timeout_stations(ic);
ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT);
IEEE80211_LOCK(ic);
ieee80211_erp_timeout(ic);
ieee80211_ht_timeout(ic);
IEEE80211_UNLOCK(ic);
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz,
ieee80211_node_timeout, ic);
}
/*
* Iterate over the node table and return an array of ref'ed nodes.
*
* This is separated out from calling the actual node function so that
* no LORs will occur.
*
* If there are too many nodes (ie, the number of nodes doesn't fit
* within 'max_aid' entries) then the node references will be freed
* and an error will be returned.
*
* The responsibility of allocating and freeing "ni_arr" is up to
* the caller.
*/
int
ieee80211_iterate_nt(struct ieee80211_node_table *nt,
struct ieee80211_node **ni_arr, uint16_t max_aid)
{
int i, j, ret;
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
i = ret = 0;
TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
if (i >= max_aid) {
ret = E2BIG;
ic_printf(nt->nt_ic, "Node array overflow: max=%u",
max_aid);
break;
}
ni_arr[i] = ieee80211_ref_node(ni);
i++;
}
/*
* It's safe to unlock here.
*
* If we're successful, the list is returned.
* If we're unsuccessful, the list is ignored
* and we remove our references.
*
* This avoids any potential LOR with
* ieee80211_free_node().
*/
IEEE80211_NODE_UNLOCK(nt);
/*
* If ret is non-zero, we hit some kind of error.
* Rather than walking some nodes, we'll walk none
* of them.
*/
if (ret) {
for (j = 0; j < i; j++) {
/* ieee80211_free_node() locks by itself */
ieee80211_free_node(ni_arr[j]);
}
}
return (ret);
}
/*
* Just a wrapper, so we don't have to change every ieee80211_iterate_nodes()
* reference in the source.
*
* Note that this fetches 'max_aid' from the first VAP, rather than finding
* the largest max_aid from all VAPs.
*/
void
ieee80211_iterate_nodes(struct ieee80211_node_table *nt,
ieee80211_iter_func *f, void *arg)
{
struct ieee80211_node **ni_arr;
size_t size;
int i;
uint16_t max_aid;
struct ieee80211vap *vap;
/* Overdoing it default */
max_aid = IEEE80211_AID_MAX;
/* Handle the case of there being no vaps just yet */
vap = TAILQ_FIRST(&nt->nt_ic->ic_vaps);
if (vap != NULL)
max_aid = vap->iv_max_aid;
size = max_aid * sizeof(struct ieee80211_node *);
ni_arr = (struct ieee80211_node **) IEEE80211_MALLOC(size, M_80211_NODE,
IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
if (ni_arr == NULL)
return;
/*
* If this fails, the node table won't have any
* valid entries - ieee80211_iterate_nt() frees
* the references to them. So don't try walking
* the table; just skip to the end and free the
* temporary memory.
*/
if (ieee80211_iterate_nt(nt, ni_arr, max_aid) != 0)
goto done;
for (i = 0; i < max_aid; i++) {
if (ni_arr[i] == NULL) /* end of the list */
break;
(*f)(arg, ni_arr[i]);
/* ieee80211_free_node() locks by itself */
ieee80211_free_node(ni_arr[i]);
}
done:
IEEE80211_FREE(ni_arr, M_80211_NODE);
}
void
ieee80211_dump_node(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
{
printf("0x%p: mac %s refcnt %d\n", ni,
ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni));
[net80211] remove node scan lock / generation number + fix few LORs Drop scan generation number and node table scan lock - the only place where ni_scangen is checked is in ieee80211_timeout_stations() (and it is used to prevent duplicate checking of the same node); node scan lock protects only this variable + node table scan generation number. This will fix (at least) next LOR (hostap mode): lock order reversal: 1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019 2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693 stack backtrace: #0 0xa070d1c5 at witness_debugger+0x75 #1 0xa070d0f6 at witness_checkorder+0xd46 #2 0xa0694cce at __mtx_lock_flags+0x9e #3 0xb03ad9ef at ieee80211_node_leave+0x12f #4 0xb03afd13 at ieee80211_timeout_stations+0x483 #5 0xb03aa1c2 at ieee80211_node_timeout+0x42 #6 0xa06c6fa1 at softclock_call_cc+0x1e1 #7 0xa06c7518 at softclock+0xc8 #8 0xa06789ae at intr_event_execute_handlers+0x8e #9 0xa0678fa0 at ithread_loop+0x90 #10 0xa0675fbe at fork_exit+0x7e #11 0xa08af910 at fork_trampoline+0x8 In addition to the above: * switch to ieee80211_iterate_nodes(); * do not assert that node table lock is held, while calling node_age(); that's not really needed (there are no resources, which can be protected by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations() and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while sending something to an STA with enabled power management). Tested: * (avos) urtwn0, hostap mode * (adrian) AR9380, STA mode * (adrian) AR9380, AR9331, AR9580, hostap mode Notes: * This changes the net80211 internals, so you have to recompile all of it and the wifi drivers. Submitted by: avos Approved by: re (delphij) Differential Revision: https://reviews.freebsd.org/D6833
2016-06-19 07:31:02 +00:00
printf("\tauthmode %u flags 0x%x\n",
ni->ni_authmode, ni->ni_flags);
printf("\tassocid 0x%x txpower %u vlan %u\n",
ni->ni_associd, ni->ni_txpower, ni->ni_vlan);
printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n",
ni->ni_txseqs[IEEE80211_NONQOS_TID],
ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT,
ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK,
ni->ni_rxfragstamp);
printf("\trssi %d noise %d intval %u capinfo 0x%x\n",
node_getrssi(ni), ni->ni_noise,
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_intval, ni->ni_capinfo);
printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n",
ether_sprintf(ni->ni_bssid),
ni->ni_esslen, ni->ni_essid,
ni->ni_chan->ic_freq, ni->ni_chan->ic_flags);
printf("\tinact %u inact_reload %u txrate %u\n",
ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n",
ni->ni_htcap, ni->ni_htparam,
ni->ni_htctlchan, ni->ni_ht2ndchan);
printf("\thtopmode %x htstbc %x chw %u\n",
ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw);
}
void
ieee80211_dump_nodes(struct ieee80211_node_table *nt)
{
ieee80211_iterate_nodes(nt,
(ieee80211_iter_func *) ieee80211_dump_node, nt);
}
static void
ieee80211_notify_erp_locked(struct ieee80211com *ic)
{
struct ieee80211vap *vap;
IEEE80211_LOCK_ASSERT(ic);
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_opmode == IEEE80211_M_HOSTAP)
ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP);
}
void
ieee80211_notify_erp(struct ieee80211com *ic)
{
IEEE80211_LOCK(ic);
ieee80211_notify_erp_locked(ic);
IEEE80211_UNLOCK(ic);
}
/*
* Handle a station joining an 11g network.
*/
static void
ieee80211_node_join_11g(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
IEEE80211_LOCK_ASSERT(ic);
/*
* Station isn't capable of short slot time. Bump
* the count of long slot time stations and disable
* use of short slot time. Note that the actual switch
* over to long slot time use may not occur until the
* next beacon transmission (per sec. 7.3.1.4 of 11g).
*/
if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) {
ic->ic_longslotsta++;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"station needs long slot time, count %d",
ic->ic_longslotsta);
/* XXX vap's w/ conflicting needs won't work */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) {
/*
* Don't force slot time when switched to turbo
* mode as non-ERP stations won't be present; this
* need only be done when on the normal G channel.
*/
ieee80211_set_shortslottime(ic, 0);
}
}
/*
* If the new station is not an ERP station
* then bump the counter and enable protection
* if configured.
*/
if (!ieee80211_iserp_rateset(&ni->ni_rates)) {
ic->ic_nonerpsta++;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"station is !ERP, %d non-ERP stations associated",
ic->ic_nonerpsta);
/*
* If station does not support short preamble
* then we must enable use of Barker preamble.
*/
if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) {
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"%s", "station needs long preamble");
ic->ic_flags |= IEEE80211_F_USEBARKER;
ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE;
}
/*
* If protection is configured and this is the first
* indication we should use protection, enable it.
*/
if (ic->ic_protmode != IEEE80211_PROT_NONE &&
ic->ic_nonerpsta == 1 &&
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
"%s: enable use of protection\n", __func__);
ic->ic_flags |= IEEE80211_F_USEPROT;
ieee80211_notify_erp_locked(ic);
}
} else
ni->ni_flags |= IEEE80211_NODE_ERP;
}
void
ieee80211_node_join(struct ieee80211_node *ni, int resp)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
int newassoc;
if (ni->ni_associd == 0) {
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
uint16_t aid;
KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap"));
/*
* It would be good to search the bitmap
* more efficiently, but this will do for now.
*/
for (aid = 1; aid < vap->iv_max_aid; aid++) {
if (!IEEE80211_AID_ISSET(vap, aid))
break;
}
if (aid >= vap->iv_max_aid) {
IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY);
ieee80211_node_leave(ni);
return;
}
ni->ni_associd = aid | 0xc000;
ni->ni_jointime = time_uptime;
IEEE80211_LOCK(ic);
IEEE80211_AID_SET(vap, ni->ni_associd);
vap->iv_sta_assoc++;
ic->ic_sta_assoc++;
if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan))
ieee80211_ht_node_join(ni);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) &&
IEEE80211_IS_CHAN_FULL(ic->ic_bsschan))
ieee80211_node_join_11g(ni);
IEEE80211_UNLOCK(ic);
newassoc = 1;
} else
newassoc = 0;
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni,
"station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s",
IEEE80211_NODE_AID(ni),
ic->ic_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long",
ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long",
ic->ic_flags & IEEE80211_F_USEPROT ? ", protection" : "",
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "",
ni->ni_flags & IEEE80211_NODE_HT ?
2008-09-06 17:51:02 +00:00
(ni->ni_chw == 40 ? ", HT40" : ", HT20") : "",
ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "",
ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" :
ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "",
ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "",
IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ?
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
", fast-frames" : "",
IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ?
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
", turbo" : ""
);
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
/* give driver a chance to setup state like ni_txrate */
2004-12-31 21:28:41 +00:00
if (ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, newassoc);
IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS);
/* tell the authenticator about new station */
if (vap->iv_auth->ia_node_join != NULL)
vap->iv_auth->ia_node_join(ni);
ieee80211_notify_node_join(ni,
resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP);
}
static void
disable_protection(struct ieee80211com *ic)
{
KASSERT(ic->ic_nonerpsta == 0 &&
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0,
("%d non ERP stations, flags 0x%x", ic->ic_nonerpsta,
ic->ic_flags_ext));
ic->ic_flags &= ~IEEE80211_F_USEPROT;
/* XXX verify mode? */
if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) {
ic->ic_flags |= IEEE80211_F_SHPREAMBLE;
ic->ic_flags &= ~IEEE80211_F_USEBARKER;
}
ieee80211_notify_erp_locked(ic);
}
/*
* Handle a station leaving an 11g network.
*/
static void
ieee80211_node_leave_11g(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
IEEE80211_LOCK_ASSERT(ic);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan),
("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq,
ic->ic_bsschan->ic_flags));
/*
* If a long slot station do the slot time bookkeeping.
*/
if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) {
KASSERT(ic->ic_longslotsta > 0,
("bogus long slot station count %d", ic->ic_longslotsta));
ic->ic_longslotsta--;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"long slot time station leaves, count now %d",
ic->ic_longslotsta);
if (ic->ic_longslotsta == 0) {
/*
* Re-enable use of short slot time if supported
* and not operating in IBSS mode (per spec).
*/
if ((ic->ic_caps & IEEE80211_C_SHSLOT) &&
ic->ic_opmode != IEEE80211_M_IBSS) {
IEEE80211_DPRINTF(ni->ni_vap,
IEEE80211_MSG_ASSOC,
"%s: re-enable use of short slot time\n",
__func__);
ieee80211_set_shortslottime(ic, 1);
}
}
}
/*
* If a non-ERP station do the protection-related bookkeeping.
*/
if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) {
KASSERT(ic->ic_nonerpsta > 0,
("bogus non-ERP station count %d", ic->ic_nonerpsta));
ic->ic_nonerpsta--;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"non-ERP station leaves, count now %d%s", ic->ic_nonerpsta,
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) ?
" (non-ERP sta present)" : "");
if (ic->ic_nonerpsta == 0 &&
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
"%s: disable use of protection\n", __func__);
disable_protection(ic);
}
}
}
/*
* Time out presence of an overlapping bss with non-ERP
* stations. When operating in hostap mode we listen for
* beacons from other stations and if we identify a non-ERP
* station is present we enable protection. To identify
* when all non-ERP stations are gone we time out this
* condition.
*/
static void
ieee80211_erp_timeout(struct ieee80211com *ic)
{
IEEE80211_LOCK_ASSERT(ic);
if ((ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) &&
ieee80211_time_after(ticks, ic->ic_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) {
#if 0
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni,
"%s", "age out non-ERP sta present on channel");
#endif
ic->ic_flags_ext &= ~IEEE80211_FEXT_NONERP_PR;
if (ic->ic_nonerpsta == 0)
disable_protection(ic);
}
}
/*
* Handle bookkeeping for station deauthentication/disassociation
* when operating as an ap.
*/
void
ieee80211_node_leave(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_node_table *nt = ni->ni_table;
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni,
"station with aid %d leaves", IEEE80211_NODE_AID(ni));
KASSERT(vap->iv_opmode != IEEE80211_M_STA,
("unexpected operating mode %u", vap->iv_opmode));
/*
* If node wasn't previously associated all
* we need to do is reclaim the reference.
*/
/* XXX ibss mode bypasses 11g and notification */
if (ni->ni_associd == 0)
goto done;
/*
* Tell the authenticator the station is leaving.
* Note that we must do this before yanking the
* association id as the authenticator uses the
* associd to locate it's state block.
*/
if (vap->iv_auth->ia_node_leave != NULL)
vap->iv_auth->ia_node_leave(ni);
IEEE80211_LOCK(ic);
IEEE80211_AID_CLR(vap, ni->ni_associd);
vap->iv_sta_assoc--;
ic->ic_sta_assoc--;
if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan))
ieee80211_ht_node_leave(ni);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) &&
IEEE80211_IS_CHAN_FULL(ic->ic_bsschan))
ieee80211_node_leave_11g(ni);
IEEE80211_UNLOCK(ic);
/*
* Cleanup station state. In particular clear various
* state that might otherwise be reused if the node
* is reused before the reference count goes to zero
* (and memory is reclaimed).
*/
ieee80211_sta_leave(ni);
done:
/*
* Remove the node from any table it's recorded in and
* drop the caller's reference. Removal from the table
* is important to insure the node is not reprocessed
* for inactivity.
*/
if (nt != NULL) {
IEEE80211_NODE_LOCK(nt);
node_reclaim(nt, ni);
IEEE80211_NODE_UNLOCK(nt);
} else
ieee80211_free_node(ni);
}
struct rssiinfo {
struct ieee80211vap *vap;
int rssi_samples;
uint32_t rssi_total;
};
static void
get_hostap_rssi(void *arg, struct ieee80211_node *ni)
{
struct rssiinfo *info = arg;
struct ieee80211vap *vap = ni->ni_vap;
int8_t rssi;
if (info->vap != vap)
return;
/* only associated stations */
if (ni->ni_associd == 0)
return;
rssi = vap->iv_ic->ic_node_getrssi(ni);
if (rssi != 0) {
info->rssi_samples++;
info->rssi_total += rssi;
}
}
static void
get_adhoc_rssi(void *arg, struct ieee80211_node *ni)
{
struct rssiinfo *info = arg;
struct ieee80211vap *vap = ni->ni_vap;
int8_t rssi;
if (info->vap != vap)
return;
/* only neighbors */
/* XXX check bssid */
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
return;
rssi = vap->iv_ic->ic_node_getrssi(ni);
if (rssi != 0) {
info->rssi_samples++;
info->rssi_total += rssi;
}
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
static void
get_mesh_rssi(void *arg, struct ieee80211_node *ni)
{
struct rssiinfo *info = arg;
struct ieee80211vap *vap = ni->ni_vap;
int8_t rssi;
if (info->vap != vap)
return;
/* only neighbors that peered successfully */
if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
return;
rssi = vap->iv_ic->ic_node_getrssi(ni);
if (rssi != 0) {
info->rssi_samples++;
info->rssi_total += rssi;
}
}
#endif /* IEEE80211_SUPPORT_MESH */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
int8_t
ieee80211_getrssi(struct ieee80211vap *vap)
{
#define NZ(x) ((x) == 0 ? 1 : (x))
struct ieee80211com *ic = vap->iv_ic;
struct rssiinfo info;
info.rssi_total = 0;
info.rssi_samples = 0;
info.vap = vap;
switch (vap->iv_opmode) {
case IEEE80211_M_IBSS: /* average of all ibss neighbors */
case IEEE80211_M_AHDEMO: /* average of all neighbors */
ieee80211_iterate_nodes(&ic->ic_sta, get_adhoc_rssi, &info);
break;
case IEEE80211_M_HOSTAP: /* average of all associated stations */
ieee80211_iterate_nodes(&ic->ic_sta, get_hostap_rssi, &info);
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#ifdef IEEE80211_SUPPORT_MESH
case IEEE80211_M_MBSS: /* average of all mesh neighbors */
ieee80211_iterate_nodes(&ic->ic_sta, get_mesh_rssi, &info);
break;
#endif
case IEEE80211_M_MONITOR: /* XXX */
case IEEE80211_M_STA: /* use stats from associated ap */
default:
if (vap->iv_bss != NULL)
info.rssi_total = ic->ic_node_getrssi(vap->iv_bss);
info.rssi_samples = 1;
break;
}
return info.rssi_total / NZ(info.rssi_samples);
#undef NZ
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
void
ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise)
{
if (vap->iv_bss == NULL) /* NB: shouldn't happen */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
return;
vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/* for non-station mode return avg'd rssi accounting */
if (vap->iv_opmode != IEEE80211_M_STA)
*rssi = ieee80211_getrssi(vap);
}