freebsd-skq/sys/dev/twa/tw_osl.h

318 lines
9.8 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004-07 Applied Micro Circuits Corporation.
* Copyright (c) 2004-05 Vinod Kashyap.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* AMCC'S 3ware driver for 9000 series storage controllers.
*
* Author: Vinod Kashyap
* Modifications by: Adam Radford
* Modifications by: Manjunath Ranganathaiah
*/
#ifndef TW_OSL_H
#define TW_OSL_H
/*
* OS Layer internal macros, structures and functions.
*/
#define TW_OSLI_DEVICE_NAME "3ware 9000 series Storage Controller"
#define TW_OSLI_MALLOC_CLASS M_TWA
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
#define TW_OSLI_MAX_NUM_REQUESTS TW_CL_MAX_SIMULTANEOUS_REQUESTS
/* Reserve two command packets. One for ioctls and one for AENs */
#define TW_OSLI_MAX_NUM_IOS (TW_OSLI_MAX_NUM_REQUESTS - 2)
#define TW_OSLI_MAX_NUM_AENS 0x100
/* Possible values of req->state. */
#define TW_OSLI_REQ_STATE_INIT 0x0 /* being initialized */
#define TW_OSLI_REQ_STATE_BUSY 0x1 /* submitted to CL */
#define TW_OSLI_REQ_STATE_PENDING 0x2 /* in pending queue */
#define TW_OSLI_REQ_STATE_COMPLETE 0x3 /* completed by CL */
/* Possible values of req->flags. */
#define TW_OSLI_REQ_FLAGS_DATA_IN (1<<0) /* read request */
#define TW_OSLI_REQ_FLAGS_DATA_OUT (1<<1) /* write request */
#define TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED (1<<2)/* data in ccb is misaligned,
have to copy to/from private buffer */
#define TW_OSLI_REQ_FLAGS_MAPPED (1<<3) /* request has been mapped */
#define TW_OSLI_REQ_FLAGS_IN_PROGRESS (1<<4) /* bus_dmamap_load returned
EINPROGRESS */
#define TW_OSLI_REQ_FLAGS_PASSTHRU (1<<5) /* pass through request */
#define TW_OSLI_REQ_FLAGS_SLEEPING (1<<6) /* owner sleeping on this cmd */
#define TW_OSLI_REQ_FLAGS_FAILED (1<<7) /* bus_dmamap_load() failed */
#ifdef TW_OSL_DEBUG
struct tw_osli_q_stats {
TW_UINT32 cur_len; /* current # of items in q */
TW_UINT32 max_len; /* max value reached by q_length */
};
#endif /* TW_OSL_DEBUG */
/* Queues of OSL internal request context packets. */
#define TW_OSLI_FREE_Q 0 /* free q */
#define TW_OSLI_BUSY_Q 1 /* q of reqs submitted to CL */
#define TW_OSLI_Q_COUNT 2 /* total number of queues */
/* Driver's request packet. */
struct tw_osli_req_context {
struct tw_cl_req_handle req_handle;/* tag to track req b/w OSL & CL */
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
struct mtx ioctl_wake_timeout_lock_handle;/* non-spin lock used to detect ioctl timeout */
struct mtx *ioctl_wake_timeout_lock;/* ptr to above lock */
struct twa_softc *ctlr; /* ptr to OSL's controller context */
TW_VOID *data; /* ptr to data being passed to CL */
TW_UINT32 length; /* length of buf being passed to CL */
TW_UINT64 deadline;/* request timeout (in absolute time) */
/*
* ptr to, and length of data passed to us from above, in case a buffer
* copy was done due to non-compliance to alignment requirements
*/
TW_VOID *real_data;
TW_UINT32 real_length;
TW_UINT32 state; /* request state */
TW_UINT32 flags; /* request flags */
/* error encountered before request submission to CL */
TW_UINT32 error_code;
/* ptr to orig req for use during callback */
TW_VOID *orig_req;
struct tw_cl_link link; /* to link this request in a list */
bus_dmamap_t dma_map;/* DMA map for data */
struct tw_cl_req_packet req_pkt;/* req pkt understood by CL */
};
/* Per-controller structure. */
struct twa_softc {
struct tw_cl_ctlr_handle ctlr_handle;
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
struct tw_osli_req_context *req_ctx_buf;
/* Controller state. */
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
TW_UINT8 open;
TW_UINT32 flags;
TW_INT32 device_id;
TW_UINT32 alignment;
TW_UINT32 sg_size_factor;
TW_VOID *non_dma_mem;
TW_VOID *dma_mem;
TW_UINT64 dma_mem_phys;
/* Request queues and arrays. */
struct tw_cl_link req_q_head[TW_OSLI_Q_COUNT];
struct task deferred_intr_callback;/* taskqueue function */
struct mtx io_lock_handle;/* general purpose lock */
struct mtx *io_lock;/* ptr to general purpose lock */
struct mtx q_lock_handle; /* queue manipulation lock */
struct mtx *q_lock;/* ptr to queue manipulation lock */
struct mtx sim_lock_handle;/* sim lock shared with cam */
struct mtx *sim_lock;/* ptr to sim lock */
2011-12-15 06:29:13 +00:00
struct callout watchdog_callout[2]; /* For command timeout */
TW_UINT32 watchdog_index;
#ifdef TW_OSL_DEBUG
struct tw_osli_q_stats q_stats[TW_OSLI_Q_COUNT];/* queue statistics */
#endif /* TW_OSL_DEBUG */
device_t bus_dev; /* bus device */
struct cdev *ctrl_dev; /* control device */
struct resource *reg_res; /* register interface window */
TW_INT32 reg_res_id; /* register resource id */
bus_space_handle_t bus_handle; /* bus space handle */
bus_space_tag_t bus_tag; /* bus space tag */
bus_dma_tag_t parent_tag; /* parent DMA tag */
bus_dma_tag_t cmd_tag; /* DMA tag for CL's DMA'able mem */
bus_dma_tag_t dma_tag; /* data buffer DMA tag */
bus_dma_tag_t ioctl_tag; /* ioctl data buffer DMA tag */
bus_dmamap_t cmd_map; /* DMA map for CL's DMA'able mem */
bus_dmamap_t ioctl_map; /* DMA map for ioctl data buffers */
struct resource *irq_res; /* interrupt resource */
TW_INT32 irq_res_id; /* register resource id */
TW_VOID *intr_handle; /* interrupt handle */
struct sysctl_ctx_list sysctl_ctxt; /* sysctl context */
struct sysctl_oid *sysctl_tree; /* sysctl oid */
struct cam_sim *sim; /* sim for this controller */
struct cam_path *path; /* peripheral, path, tgt, lun
associated with this controller */
};
/*
* Queue primitives.
*/
#ifdef TW_OSL_DEBUG
#define TW_OSLI_Q_INIT(sc, q_type) do { \
(sc)->q_stats[q_type].cur_len = 0; \
(sc)->q_stats[q_type].max_len = 0; \
} while(0)
#define TW_OSLI_Q_INSERT(sc, q_type) do { \
struct tw_osli_q_stats *q_stats = &((sc)->q_stats[q_type]); \
\
if (++(q_stats->cur_len) > q_stats->max_len) \
q_stats->max_len = q_stats->cur_len; \
} while(0)
#define TW_OSLI_Q_REMOVE(sc, q_type) \
(sc)->q_stats[q_type].cur_len--
#else /* TW_OSL_DEBUG */
#define TW_OSLI_Q_INIT(sc, q_index)
#define TW_OSLI_Q_INSERT(sc, q_index)
#define TW_OSLI_Q_REMOVE(sc, q_index)
#endif /* TW_OSL_DEBUG */
/* Initialize a queue of requests. */
static __inline TW_VOID
tw_osli_req_q_init(struct twa_softc *sc, TW_UINT8 q_type)
{
TW_CL_Q_INIT(&(sc->req_q_head[q_type]));
TW_OSLI_Q_INIT(sc, q_type);
}
/* Insert the given request at the head of the given queue (q_type). */
static __inline TW_VOID
tw_osli_req_q_insert_head(struct tw_osli_req_context *req, TW_UINT8 q_type)
{
mtx_lock_spin(req->ctlr->q_lock);
TW_CL_Q_INSERT_HEAD(&(req->ctlr->req_q_head[q_type]), &(req->link));
TW_OSLI_Q_INSERT(req->ctlr, q_type);
mtx_unlock_spin(req->ctlr->q_lock);
}
/* Insert the given request at the tail of the given queue (q_type). */
static __inline TW_VOID
tw_osli_req_q_insert_tail(struct tw_osli_req_context *req, TW_UINT8 q_type)
{
mtx_lock_spin(req->ctlr->q_lock);
TW_CL_Q_INSERT_TAIL(&(req->ctlr->req_q_head[q_type]), &(req->link));
TW_OSLI_Q_INSERT(req->ctlr, q_type);
mtx_unlock_spin(req->ctlr->q_lock);
}
/* Remove and return the request at the head of the given queue (q_type). */
static __inline struct tw_osli_req_context *
tw_osli_req_q_remove_head(struct twa_softc *sc, TW_UINT8 q_type)
{
struct tw_osli_req_context *req = NULL;
struct tw_cl_link *link;
mtx_lock_spin(sc->q_lock);
if ((link = TW_CL_Q_FIRST_ITEM(&(sc->req_q_head[q_type]))) !=
TW_CL_NULL) {
req = TW_CL_STRUCT_HEAD(link,
struct tw_osli_req_context, link);
TW_CL_Q_REMOVE_ITEM(&(sc->req_q_head[q_type]), &(req->link));
TW_OSLI_Q_REMOVE(sc, q_type);
}
mtx_unlock_spin(sc->q_lock);
return(req);
}
/* Remove the given request from the given queue (q_type). */
static __inline TW_VOID
tw_osli_req_q_remove_item(struct tw_osli_req_context *req, TW_UINT8 q_type)
{
mtx_lock_spin(req->ctlr->q_lock);
TW_CL_Q_REMOVE_ITEM(&(req->ctlr->req_q_head[q_type]), &(req->link));
TW_OSLI_Q_REMOVE(req->ctlr, q_type);
mtx_unlock_spin(req->ctlr->q_lock);
}
#ifdef TW_OSL_DEBUG
extern TW_INT32 TW_DEBUG_LEVEL_FOR_OSL;
#define tw_osli_dbg_dprintf(dbg_level, sc, fmt, args...) \
if (dbg_level <= TW_DEBUG_LEVEL_FOR_OSL) \
device_printf(sc->bus_dev, "%s: " fmt "\n", \
__func__, ##args)
#define tw_osli_dbg_printf(dbg_level, fmt, args...) \
if (dbg_level <= TW_DEBUG_LEVEL_FOR_OSL) \
printf("%s: " fmt "\n", __func__, ##args)
#else /* TW_OSL_DEBUG */
#define tw_osli_dbg_dprintf(dbg_level, sc, fmt, args...)
#define tw_osli_dbg_printf(dbg_level, fmt, args...)
#endif /* TW_OSL_DEBUG */
/* For regular printing. */
#define twa_printf(sc, fmt, args...) \
device_printf(((struct twa_softc *)(sc))->bus_dev, fmt, ##args)
/* For printing in the "consistent error reporting" format. */
#define tw_osli_printf(sc, err_specific_desc, args...) \
device_printf((sc)->bus_dev, \
"%s: (0x%02X: 0x%04X): %s: " err_specific_desc "\n", ##args)
#endif /* TW_OSL_H */