d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
100f3d3da6
freebsd-skq/sys/kern/uipc_domain.c

525 lines
14 KiB
C
Raw Normal View History

/* -> /*- for copyright notices, minor format tweaks as necessary
2005-01-06 23:35:40 +00:00
/*-
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)uipc_domain.c 8.2 (Berkeley) 10/18/93
*/
Use __FBSDID().
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
#include <sys/socket.h>
#include <sys/protosw.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/domain.h>
Allow for nmbclusters and maxsockets to be increased via sysctl. An eventhandler is used to update all the various zones that depend on these values.
2006-04-21 09:25:40 +00:00
#include <sys/eventhandler.h>
Lock down a socket, milestone 1. o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a socket buffer. The mutex in the receive buffer also protects the data in struct socket. o Determine the lock strategy for each members in struct socket. o Lock down the following members: - so_count - so_options - so_linger - so_state o Remove *_locked() socket APIs. Make the following socket APIs touching the members above now require a locked socket: - sodisconnect() - soisconnected() - soisconnecting() - soisdisconnected() - soisdisconnecting() - sofree() - soref() - sorele() - sorwakeup() - sotryfree() - sowakeup() - sowwakeup() Reviewed by: alfred
2002-05-20 05:41:09 +00:00
#include <sys/mbuf.h>
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
#include <sys/kernel.h>
o interlock domain list when adding domains o remove irrlevant spl Notes: 1. We don't lock domain list traversals as this is safe until we start removing domains. 2. The calculation of max_datalen in net_init_domain appears safe as noone depends on max_hdr and max_datalen having consistent values. 3. Giant is still held for fast and slow timeouts; this must stay until each timeout routine is properly locked (coming soon). Sponsored by: FreeBSD Fondation
2003-09-01 05:01:55 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
Convert socket structures to be type-stable and add a version number. Define a parameter which indicates the maximum number of sockets in a system, and use this to size the zone allocators used for sockets and for certain PCBs. Convert PF_LOCAL PCB structures to be type-stable and add a version number. Define an external format for infomation about socket structures and use it in several places. Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through sysctl(3) without blocking network interrupts for an unreasonable length of time. This probably still has some bugs and/or race conditions, but it seems to work well enough on my machines. It is now possible for `netstat' to get almost all of its information via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00
#include <sys/socketvar.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/systm.h>
Merge the remainder of kern_vimage.c and vimage.h into vnet.c and vnet.h, we now use jails (rather than vimages) as the abstraction for virtualization management, and what remained was specific to virtual network stacks. Minor cleanups are done in the process, and comments updated to reflect these changes. Reviewed by: bz Approved by: re (vimage blanket)
2009-08-01 19:26:27 +00:00
#include <net/vnet.h>
Reviewed by: julian with quick glances by bruce and others Submitted by: terry (terry lambert) This is a composite of 3 patch sets submitted by terry. they are: New low-level init code that supports loadbal modules better some cleanups in the namei code to help terry in 16-bit character support some changes to the mount-root code to make it a little more modular.. NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able to test those cases.. certainly mounting root of disk still works just fine.. mfs should work but is untested. (tomorrows task) The low level init stuff includes a total rewrite of init_main.c to make it possible for new modules to have an init phase by simply adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can be added to the kernel without editing any other files other than the 'files' file.
1995-08-28 09:19:25 +00:00
/*
* System initialization
*
Update the comment about System initialization to reflect the use of DOMAIN_SET(9) instead of SYSINIT for adding domains at startup. Reviewed by: alfred
2001-12-08 04:20:54 +00:00
* Note: domain initialization takes place on a per domain basis
* as a result of traversing a SYSINIT linker set. Most likely,
* each domain would want to call DOMAIN_SET(9) itself, which
* would cause the domain to be added just after domaininit()
* is called during startup.
Reviewed by: julian with quick glances by bruce and others Submitted by: terry (terry lambert) This is a composite of 3 patch sets submitted by terry. they are: New low-level init code that supports loadbal modules better some cleanups in the namei code to help terry in 16-bit character support some changes to the mount-root code to make it a little more modular.. NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able to test those cases.. certainly mounting root of disk still works just fine.. mfs should work but is untested. (tomorrows task) The low level init stuff includes a total rewrite of init_main.c to make it possible for new modules to have an init phase by simply adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can be added to the kernel without editing any other files other than the 'files' file.
1995-08-28 09:19:25 +00:00
*
Update the comment about System initialization to reflect the use of DOMAIN_SET(9) instead of SYSINIT for adding domains at startup. Reviewed by: alfred
2001-12-08 04:20:54 +00:00
* See DOMAIN_SET(9) for details on its use.
Reviewed by: julian with quick glances by bruce and others Submitted by: terry (terry lambert) This is a composite of 3 patch sets submitted by terry. they are: New low-level init code that supports loadbal modules better some cleanups in the namei code to help terry in 16-bit character support some changes to the mount-root code to make it a little more modular.. NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able to test those cases.. certainly mounting root of disk still works just fine.. mfs should work but is untested. (tomorrows task) The low level init stuff includes a total rewrite of init_main.c to make it possible for new modules to have an init phase by simply adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can be added to the kernel without editing any other files other than the 'files' file.
1995-08-28 09:19:25 +00:00
*/
Remove __P.
2002-03-19 21:25:46 +00:00
static void domaininit(void *);
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
SYSINIT(domain, SI_SUB_PROTO_DOMAININIT, SI_ORDER_ANY, domaininit, NULL);
Reviewed by: julian with quick glances by bruce and others Submitted by: terry (terry lambert) This is a composite of 3 patch sets submitted by terry. they are: New low-level init code that supports loadbal modules better some cleanups in the namei code to help terry in 16-bit character support some changes to the mount-root code to make it a little more modular.. NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able to test those cases.. certainly mounting root of disk still works just fine.. mfs should work but is untested. (tomorrows task) The low level init stuff includes a total rewrite of init_main.c to make it possible for new modules to have an init phase by simply adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can be added to the kernel without editing any other files other than the 'files' file.
1995-08-28 09:19:25 +00:00
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
static void domainfinalize(void *);
SYSINIT(domainfin, SI_SUB_PROTO_IFATTACHDOMAIN, SI_ORDER_FIRST, domainfinalize,
In keeping with style(9)'s recommendations on macros, use a ';' after each SYSINIT() macro invocation. This makes a number of lightweight C parsers much happier with the FreeBSD kernel source, including cflow's prcc and lxr. MFC after: 1 month Discussed with: imp, rink
2008-03-16 10:58:09 +00:00
NULL);
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
Use callout_reset instead of timeout(9). Most callouts are statically allocated, 2 have been added to struct proc for setitimer and sleep. Reviewed by: jhb, jlemon
2000-11-27 22:52:31 +00:00
static struct callout pffast_callout;
static struct callout pfslow_callout;
Remove __P.
2002-03-19 21:25:46 +00:00
static void pffasttimo(void *);
static void pfslowtimo(void *);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
o interlock domain list when adding domains o remove irrlevant spl Notes: 1. We don't lock domain list traversals as this is safe until we start removing domains. 2. The calculation of max_datalen in net_init_domain appears safe as noone depends on max_hdr and max_datalen having consistent values. 3. Giant is still held for fast and slow timeouts; this must stay until each timeout routine is properly locked (coming soon). Sponsored by: FreeBSD Fondation
2003-09-01 05:01:55 +00:00
struct domain *domains; /* registered protocol domains */
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
int domain_init_status = 0;
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
static struct mtx dom_mtx; /* domain list lock */
move domain list mutex initialization to earlier in the boot sequence so statically configured modules like netgraph can call net_init_domain Noticed by: D.Rock@t-online.de (D. Rock)
2003-09-02 20:59:23 +00:00
MTX_SYSINIT(domain, &dom_mtx, "domain list", MTX_DEF);
Make networking domains drop-ins, through the magic of GNU ld. (Some day, there may even be LKMs.) Also, change the internal name of `unixdomain' to `localdomain' since AF_LOCAL is now the preferred name of this family. Declare netisr correctly and in the right place.
1995-05-11 00:13:26 +00:00
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/*
* Dummy protocol specific user requests function pointer array.
* All functions return EOPNOTSUPP.
*/
struct pr_usrreqs nousrreqs = {
Initialize struct pr_userreqs in new/sparse style and fill in common default elements in net_init_domain(). This makes it possible to grep these structures and see any bogosities.
2004-11-08 14:44:54 +00:00
.pru_accept = pru_accept_notsupp,
.pru_attach = pru_attach_notsupp,
.pru_bind = pru_bind_notsupp,
.pru_connect = pru_connect_notsupp,
.pru_connect2 = pru_connect2_notsupp,
.pru_control = pru_control_notsupp,
.pru_disconnect = pru_disconnect_notsupp,
.pru_listen = pru_listen_notsupp,
.pru_peeraddr = pru_peeraddr_notsupp,
.pru_rcvd = pru_rcvd_notsupp,
.pru_rcvoob = pru_rcvoob_notsupp,
.pru_send = pru_send_notsupp,
.pru_sense = pru_sense_null,
.pru_shutdown = pru_shutdown_notsupp,
.pru_sockaddr = pru_sockaddr_notsupp,
.pru_sosend = pru_sosend_notsupp,
.pru_soreceive = pru_soreceive_notsupp,
.pru_sopoll = pru_sopoll_notsupp,
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
};
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
static void
protosw_init(struct protosw *pr)
{
struct pr_usrreqs *pu;
pu = pr->pr_usrreqs;
KASSERT(pu != NULL, ("protosw_init: %ssw[%d] has no usrreqs!",
pr->pr_domain->dom_name,
(int)(pr - pr->pr_domain->dom_protosw)));
Following the recent security advisory, add a comment describing our invariants and approach for protocol switch methods in protsw_init(), and also some KASSERT's for non-domain init entries in protocol switch tables: pru_abort and pru_send must both be implemented. For now, leave those assertions #if 0'd, since there are a few protocols that violate them in non-harmful ways. Whether or not we should enforce pru_abort being implemented for non-stream protocols is an interesting question: currently abort is only invoked on stream sockets in situations where un-accepted sockets must be abruptly closed (i.e., close() on a listen socket with pending connections), but in principle it is useful for datagram sockets and most datagram socket types implement it. MFC after: 3 weeks
2008-12-25 11:32:38 +00:00
/*
* Protocol switch methods fall into three categories: mandatory,
* mandatory but protosw_init() provides a default, and optional.
*
* For true protocols (i.e., pru_attach != NULL), KASSERT truly
* mandatory methods with no defaults, and initialize defaults for
* other mandatory methods if the protocol hasn't defined an
* implementation (NULL function pointer).
*/
#if 0
if (pu->pru_attach != NULL) {
KASSERT(pu->pru_abort != NULL,
("protosw_init: %ssw[%d] pru_abort NULL",
pr->pr_domain->dom_name,
(int)(pr - pr->pr_domain->dom_protosw)));
KASSERT(pu->pru_send != NULL,
("protosw_init: %ssw[%d] pru_send NULL",
pr->pr_domain->dom_name,
(int)(pr - pr->pr_domain->dom_protosw)));
}
#endif
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
#define DEFAULT(foo, bar) if ((foo) == NULL) (foo) = (bar)
DEFAULT(pu->pru_accept, pru_accept_notsupp);
Prevent cross-site forgery attacks on ftpd(8) due to splitting long commands into multiple requests. [08:12] Avoid calling uninitialized function pointers in protocol switch code. [08:13] Merry Christmas everybody... Approved by: so (cperciva) Approved by: re (kensmith) Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
2008-12-23 01:23:09 +00:00
DEFAULT(pu->pru_bind, pru_bind_notsupp);
- Implement two new system calls: int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen); int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen); which allow to bind and connect respectively to a UNIX domain socket with a path relative to the directory associated with the given file descriptor 'fd'. - Add manual pages for the new syscalls. - Make the new syscalls available for processes in capability mode sandbox. - Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on the directory descriptor for the syscalls to work. - Update audit(4) to support those two new syscalls and to handle path in sockaddr_un structure relative to the given directory descriptor. - Update procstat(1) to recognize the new capability rights. - Document the new capability rights in cap_rights_limit(2). Sponsored by: The FreeBSD Foundation Discussed with: rwatson, jilles, kib, des
2013-03-02 21:11:30 +00:00
DEFAULT(pu->pru_bindat, pru_bindat_notsupp);
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
DEFAULT(pu->pru_connect, pru_connect_notsupp);
DEFAULT(pu->pru_connect2, pru_connect2_notsupp);
- Implement two new system calls: int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen); int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen); which allow to bind and connect respectively to a UNIX domain socket with a path relative to the directory associated with the given file descriptor 'fd'. - Add manual pages for the new syscalls. - Make the new syscalls available for processes in capability mode sandbox. - Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on the directory descriptor for the syscalls to work. - Update audit(4) to support those two new syscalls and to handle path in sockaddr_un structure relative to the given directory descriptor. - Update procstat(1) to recognize the new capability rights. - Document the new capability rights in cap_rights_limit(2). Sponsored by: The FreeBSD Foundation Discussed with: rwatson, jilles, kib, des
2013-03-02 21:11:30 +00:00
DEFAULT(pu->pru_connectat, pru_connectat_notsupp);
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
DEFAULT(pu->pru_control, pru_control_notsupp);
Prevent cross-site forgery attacks on ftpd(8) due to splitting long commands into multiple requests. [08:12] Avoid calling uninitialized function pointers in protocol switch code. [08:13] Merry Christmas everybody... Approved by: so (cperciva) Approved by: re (kensmith) Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
2008-12-23 01:23:09 +00:00
DEFAULT(pu->pru_disconnect, pru_disconnect_notsupp);
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
DEFAULT(pu->pru_listen, pru_listen_notsupp);
Prevent cross-site forgery attacks on ftpd(8) due to splitting long commands into multiple requests. [08:12] Avoid calling uninitialized function pointers in protocol switch code. [08:13] Merry Christmas everybody... Approved by: so (cperciva) Approved by: re (kensmith) Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
2008-12-23 01:23:09 +00:00
DEFAULT(pu->pru_peeraddr, pru_peeraddr_notsupp);
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
DEFAULT(pu->pru_rcvd, pru_rcvd_notsupp);
DEFAULT(pu->pru_rcvoob, pru_rcvoob_notsupp);
DEFAULT(pu->pru_sense, pru_sense_null);
Prevent cross-site forgery attacks on ftpd(8) due to splitting long commands into multiple requests. [08:12] Avoid calling uninitialized function pointers in protocol switch code. [08:13] Merry Christmas everybody... Approved by: so (cperciva) Approved by: re (kensmith) Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
2008-12-23 01:23:09 +00:00
DEFAULT(pu->pru_shutdown, pru_shutdown_notsupp);
DEFAULT(pu->pru_sockaddr, pru_sockaddr_notsupp);
soreceive_generic(), and sopoll_generic(). Add new functions sosend(), soreceive(), and sopoll(), which are wrappers for pru_sosend, pru_soreceive, and pru_sopoll, and are now used univerally by socket consumers rather than either directly invoking the old so*() functions or directly invoking the protocol switch method (about an even split prior to this commit). This completes an architectural change that was begun in 1996 to permit protocols to provide substitute implementations, as now used by UDP. Consumers now uniformly invoke sosend(), soreceive(), and sopoll() to perform these operations on sockets -- in particular, distributed file systems and socket system calls. Architectural head nod: sam, gnn, wollman
2006-07-24 15:20:08 +00:00
DEFAULT(pu->pru_sosend, sosend_generic);
DEFAULT(pu->pru_soreceive, soreceive_generic);
DEFAULT(pu->pru_sopoll, sopoll_generic);
Merge from projects/sendfile: extend protocols API to support sending not ready data: o Add new flag to pru_send() flags - PRUS_NOTREADY. o Add new protocol method pru_ready(). Sponsored by: Nginx, Inc. Sponsored by: Netflix
2014-11-30 13:24:21 +00:00
DEFAULT(pu->pru_ready, pru_ready_notsupp);
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
#undef DEFAULT
if (pr->pr_init)
(*pr->pr_init)();
}
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
/*
* Add a new protocol domain to the list of supported domains
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
* Note: you cant unload it again because a socket may be using it.
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
* XXX can't fail at this time.
*/
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
void
domain_init(void *arg)
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
{
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
struct domain *dp = arg;
o interlock domain list when adding domains o remove irrlevant spl Notes: 1. We don't lock domain list traversals as this is safe until we start removing domains. 2. The calculation of max_datalen in net_init_domain appears safe as noone depends on max_hdr and max_datalen having consistent values. 3. Giant is still held for fast and slow timeouts; this must stay until each timeout routine is properly locked (coming soon). Sponsored by: FreeBSD Fondation
2003-09-01 05:01:55 +00:00
struct protosw *pr;
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
if (dp->dom_init)
(*dp->dom_init)();
- Introduce protosw_init(). - Utilize it in net_init_domain(). - Utilize it pf_proto_register(), fixing panic on natd start. Reviewed by: ru, phk, obrien
2004-11-11 19:19:54 +00:00
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
protosw_init(pr);
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
/*
Fix a spelling error. Submitted by: jkh Reviewed by: zarzycki
2003-03-07 22:47:32 +00:00
* update global information about maximums
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
*/
max_hdr = max_linkhdr + max_protohdr;
max_datalen = MHLEN - max_hdr;
The sysctls kern.ipc.[max_linkhdr|max_protohdr|max_hdr|max_datalen] can't be changed from userland. Make them read-only and provide descriptions. kern.ipc.max_datalen must never be less than one byte. Enforce this with a panic in net_init_domain(). Sponsored by: TCP/IP Optimization Fundraise 2005 MFC after: 3 days
2006-02-18 17:16:18 +00:00
if (max_datalen < 1)
panic("%s: max_datalen < 1", __func__);
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
}
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
#ifdef VIMAGE
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
void
vnet_domain_init(void *arg)
{
/* Virtualized case is no different -- call init functions. */
domain_init(arg);
}
void
vnet_domain_uninit(void *arg)
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
{
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
struct domain *dp = arg;
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
struct protosw *pr;
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
if (pr->pr_destroy)
(*pr->pr_destroy)();
if (dp->dom_destroy)
(*dp->dom_destroy)();
}
#endif
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
/*
* Add a new protocol domain to the list of supported domains
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
* Note: you cant unload it again because a socket may be using it.
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
* XXX can't fail at this time.
*/
Redo domain registration to use SYSINITS rather than linker sets. Get rid of the spl wrapper kludge, it doesn't seem to be needed between init calls since all that's running is the domain/protocol timers and they are safe since domain list modifications are splnet() protected (which blocks the timers)
1999-04-26 08:56:09 +00:00
void
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
domain_add(void *data)
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
{
Redo domain registration to use SYSINITS rather than linker sets. Get rid of the spl wrapper kludge, it doesn't seem to be needed between init calls since all that's running is the domain/protocol timers and they are safe since domain list modifications are splnet() protected (which blocks the timers)
1999-04-26 08:56:09 +00:00
struct domain *dp;
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
Redo domain registration to use SYSINITS rather than linker sets. Get rid of the spl wrapper kludge, it doesn't seem to be needed between init calls since all that's running is the domain/protocol timers and they are safe since domain list modifications are splnet() protected (which blocks the timers)
1999-04-26 08:56:09 +00:00
dp = (struct domain *)data;
o interlock domain list when adding domains o remove irrlevant spl Notes: 1. We don't lock domain list traversals as this is safe until we start removing domains. 2. The calculation of max_datalen in net_init_domain appears safe as noone depends on max_hdr and max_datalen having consistent values. 3. Giant is still held for fast and slow timeouts; this must stay until each timeout routine is properly locked (coming soon). Sponsored by: FreeBSD Fondation
2003-09-01 05:01:55 +00:00
mtx_lock(&dom_mtx);
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
dp->dom_next = domains;
domains = dp;
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
KASSERT(domain_init_status >= 1,
Catch up with r195837 (2.5 years ago) which renamed net_add_domain() to domain_add(). PR: 165424 Submitted by: Lachlan Kang MFC after: 1 week
2012-02-23 17:47:19 +00:00
("attempt to domain_add(%s) before domaininit()",
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
dp->dom_name));
#ifndef INVARIANTS
Am I smoking crack? Correct stupid, wrong ASSERT -> if conversion and make it do what I had in mind. Noticed by: glebius Pointyhat to: me, myself and mlaier
2004-12-02 15:47:15 +00:00
if (domain_init_status < 1)
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
printf("WARNING: attempt to domain_add(%s) before "
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
"domaininit()\n", dp->dom_name);
#endif
#ifdef notyet
KASSERT(domain_init_status < 2,
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
("attempt to domain_add(%s) after domainfinalize()",
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
dp->dom_name));
#else
Am I smoking crack? Correct stupid, wrong ASSERT -> if conversion and make it do what I had in mind. Noticed by: glebius Pointyhat to: me, myself and mlaier
2004-12-02 15:47:15 +00:00
if (domain_init_status >= 2)
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
printf("WARNING: attempt to domain_add(%s) after "
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
"domainfinalize()\n", dp->dom_name);
#endif
o interlock domain list when adding domains o remove irrlevant spl Notes: 1. We don't lock domain list traversals as this is safe until we start removing domains. 2. The calculation of max_datalen in net_init_domain appears safe as noone depends on max_hdr and max_datalen having consistent values. 3. Giant is still held for fast and slow timeouts; this must stay until each timeout routine is properly locked (coming soon). Sponsored by: FreeBSD Fondation
2003-09-01 05:01:55 +00:00
mtx_unlock(&dom_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reviewed by: julian with quick glances by bruce and others Submitted by: terry (terry lambert) This is a composite of 3 patch sets submitted by terry. they are: New low-level init code that supports loadbal modules better some cleanups in the namei code to help terry in 16-bit character support some changes to the mount-root code to make it a little more modular.. NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able to test those cases.. certainly mounting root of disk still works just fine.. mfs should work but is untested. (tomorrows task) The low level init stuff includes a total rewrite of init_main.c to make it possible for new modules to have an init phase by simply adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can be added to the kernel without editing any other files other than the 'files' file.
1995-08-28 09:19:25 +00:00
/* ARGSUSED*/
static void
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
domaininit(void *dummy)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
Minor rearranging of code to allow simple protocol domains to be added as KLDs.
1999-01-21 00:26:41 +00:00
if (max_linkhdr < 16) /* XXX */
max_linkhdr = 16;
CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten years for head. However, it is continuously misused as the mpsafe argument for callout_init(9). Deprecate the flag and clean up callout_init() calls to make them more consistent. Differential Revision: https://reviews.freebsd.org/D2613 Reviewed by: jhb MFC after: 2 weeks
2015-05-22 17:05:21 +00:00
callout_init(&pffast_callout, 1);
callout_init(&pfslow_callout, 1);
Use callout_reset instead of timeout(9). Most callouts are statically allocated, 2 have been added to struct proc for setitimer and sleep. Reviewed by: jhb, jlemon
2000-11-27 22:52:31 +00:00
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
mtx_lock(&dom_mtx);
KASSERT(domain_init_status == 0, ("domaininit called too late!"));
domain_init_status = 1;
mtx_unlock(&dom_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
/* ARGSUSED*/
static void
domainfinalize(void *dummy)
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
mtx_lock(&dom_mtx);
KASSERT(domain_init_status == 1, ("domainfinalize called too late!"));
domain_init_status = 2;
mtx_unlock(&dom_mtx);
Start the protocol timeouts only after all domains have been initialized completely. For some reason (that I am still curious about) we started to no longer manage to finish the initialization before the timeouts run the first time leading to panics when using uninitialized mutex etc. The root of this problem is that we currently first link a domain to the domains list and only later initialize the domain's protocols. This should be reworked in the future, but with the current API it is not possible in all situations. We settle with this lazy fix for now. Tested by: gnn, ru, myself
2004-12-09 11:47:30 +00:00
callout_reset(&pffast_callout, 1, pffasttimo, NULL);
callout_reset(&pfslow_callout, 1, pfslowtimo, NULL);
Implement the check I was talking about in the previous message already. Introduce domain_init_status to keep track of the init status of the domains list (surprise). 0 = uninitialized, 1 = initialized/unpopulated, 2 = initialized/done. Higher values can be used to support late addition of domains which right now "works", but is potential dangerous. I choose to only give a warning when doing so. Use domain_init_status with if_attachdomain[1]() to ensure that we have a complete domains list when we init the if_afdata array. Store the current value of domain_init_status in if_afdata_initialized. This way we can update if_afdata after a new protocol has been added (once that is allowed). Submitted by: se (with changes) Reviewed by: julian, glebius, se PR: kern/73321 (partly)
2004-11-30 22:38:37 +00:00
}
Reviewed by: julian with quick glances by bruce and others Submitted by: terry (terry lambert) This is a composite of 3 patch sets submitted by terry. they are: New low-level init code that supports loadbal modules better some cleanups in the namei code to help terry in 16-bit character support some changes to the mount-root code to make it a little more modular.. NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able to test those cases.. certainly mounting root of disk still works just fine.. mfs should work but is untested. (tomorrows task) The low level init stuff includes a total rewrite of init_main.c to make it possible for new modules to have an init phase by simply adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can be added to the kernel without editing any other files other than the 'files' file.
1995-08-28 09:19:25 +00:00
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
struct domain *
pffinddomain(int family)
{
struct domain *dp;
for (dp = domains; dp != NULL; dp = dp->dom_next)
if (dp->dom_family == family)
return (dp);
return (NULL);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct protosw *
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pffindtype(int family, int type)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
struct domain *dp;
struct protosw *pr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
dp = pffinddomain(family);
if (dp == NULL)
return (NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
if (pr->pr_type && pr->pr_type == type)
return (pr);
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
return (NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
struct protosw *
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pffindproto(int family, int protocol, int type)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
struct domain *dp;
struct protosw *pr;
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
struct protosw *maybe;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
maybe = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (family == 0)
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
return (NULL);
dp = pffinddomain(family);
if (dp == NULL)
return (NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++) {
if ((pr->pr_protocol == protocol) && (pr->pr_type == type))
return (pr);
if (type == SOCK_RAW && pr->pr_type == SOCK_RAW &&
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
pr->pr_protocol == 0 && maybe == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
maybe = pr;
}
return (maybe);
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/*
* The caller must make sure that the new protocol is fully set up and ready to
* accept requests before it is registered.
*/
int
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pf_proto_register(int family, struct protosw *npr)
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
{
When registering a protocol to an existing protocol domain via pf_proto_register(), iterate over all existing vnets to call protosw_init() and thus the appropriate .pr_init() handler in the context of each vnet. NB in the future we probably want to separate pr_init() handlers into two, i.e. per-vnet and global, functions. This change has no impact on nooptions VIMAGE builds. Approved by: re (rwatson), julian (mentor) MFC after: 3 days
2009-08-24 10:03:41 +00:00
VNET_ITERATOR_DECL(vnet_iter);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
struct domain *dp;
struct protosw *pr, *fpr;
/* Sanity checks. */
if (family == 0)
return (EPFNOSUPPORT);
if (npr->pr_type == 0)
return (EPROTOTYPE);
if (npr->pr_protocol == 0)
return (EPROTONOSUPPORT);
if (npr->pr_usrreqs == NULL)
return (ENXIO);
/* Try to find the specified domain based on the family. */
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
dp = pffinddomain(family);
if (dp == NULL)
return (EPFNOSUPPORT);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* Initialize backpointer to struct domain. */
npr->pr_domain = dp;
fpr = NULL;
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
/*
* Protect us against races when two protocol registrations for
* the same protocol happen at the same time.
*/
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_lock(&dom_mtx);
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* The new protocol must not yet exist. */
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++) {
if ((pr->pr_type == npr->pr_type) &&
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
(pr->pr_protocol == npr->pr_protocol)) {
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_unlock(&dom_mtx);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
return (EEXIST); /* XXX: Check only protocol? */
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* While here, remember the first free spacer. */
if ((fpr == NULL) && (pr->pr_protocol == PROTO_SPACER))
fpr = pr;
}
/* If no free spacer is found we can't add the new protocol. */
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
if (fpr == NULL) {
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_unlock(&dom_mtx);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
return (ENOMEM);
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* Copy the new struct protosw over the spacer. */
bcopy(npr, fpr, sizeof(*fpr));
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
/* Job is done, no more protection required. */
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_unlock(&dom_mtx);
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* Initialize and activate the protocol. */
When registering a protocol to an existing protocol domain via pf_proto_register(), iterate over all existing vnets to call protosw_init() and thus the appropriate .pr_init() handler in the context of each vnet. NB in the future we probably want to separate pr_init() handlers into two, i.e. per-vnet and global, functions. This change has no impact on nooptions VIMAGE builds. Approved by: re (rwatson), julian (mentor) MFC after: 3 days
2009-08-24 10:03:41 +00:00
VNET_LIST_RLOCK();
VNET_FOREACH(vnet_iter) {
CURVNET_SET_QUIET(vnet_iter);
protosw_init(fpr);
CURVNET_RESTORE();
}
VNET_LIST_RUNLOCK();
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
return (0);
}
/*
* The caller must make sure the protocol and its functions correctly shut down
* all sockets and release all locks and memory references.
*/
int
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pf_proto_unregister(int family, int protocol, int type)
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
{
struct domain *dp;
struct protosw *pr, *dpr;
/* Sanity checks. */
if (family == 0)
return (EPFNOSUPPORT);
if (protocol == 0)
return (EPROTONOSUPPORT);
if (type == 0)
return (EPROTOTYPE);
/* Try to find the specified domain based on the family type. */
- according to POSIX, make socket(2) return EAFNOSUPPORT rather than EPROTONOSUPPORT if the address family is not supported. - introduce pffinddomain() to find a domain by family and use it as appropriate. Reviewed by: glebius
2012-12-07 02:22:48 +00:00
dp = pffinddomain(family);
if (dp == NULL)
return (EPFNOSUPPORT);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
dpr = NULL;
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
/* Lock out everyone else while we are manipulating the protosw. */
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_lock(&dom_mtx);
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* The protocol must exist and only once. */
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++) {
if ((pr->pr_type == type) && (pr->pr_protocol == protocol)) {
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
if (dpr != NULL) {
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_unlock(&dom_mtx);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
return (EMLINK); /* Should not happen! */
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
} else
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
dpr = pr;
}
}
/* Protocol does not exist. */
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
if (dpr == NULL) {
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_unlock(&dom_mtx);
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
return (EPROTONOSUPPORT);
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
/* De-orbit the protocol and make the slot available again. */
dpr->pr_type = 0;
dpr->pr_domain = dp;
dpr->pr_protocol = PROTO_SPACER;
dpr->pr_flags = 0;
dpr->pr_input = NULL;
dpr->pr_output = NULL;
dpr->pr_ctlinput = NULL;
dpr->pr_ctloutput = NULL;
dpr->pr_init = NULL;
dpr->pr_fasttimo = NULL;
dpr->pr_slowtimo = NULL;
dpr->pr_drain = NULL;
dpr->pr_usrreqs = &nousrreqs;
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
/* Job is done, not more protection required. */
Remove Giant locking from domains list. During boot, the domain list is locked with Giant. It is not possible to register any protocols after the system has booted, so the lock is only used to protect insertion of entries. There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex to lock the list, instead of using Giant. It won't matter anything with respect to performance, but we'll never get rid of Giant if we don't remove from places where we don't need it. Approved by: rwatson MFC after: 3 weeks
2009-01-04 19:22:53 +00:00
mtx_unlock(&dom_mtx);
Aquire GIANT in pf_proto_[un]register() before manipulating the protosw.
2004-10-23 18:52:06 +00:00
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
return (0);
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pfctlinput(int cmd, struct sockaddr *sa)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
struct domain *dp;
struct protosw *pr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (dp = domains; dp; dp = dp->dom_next)
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
if (pr->pr_ctlinput)
Uniformized pr_ctlinput protosw functions. The third arg is now `void *' instead of caddr_t and it isn't optional (it never was). Most of the netipx (and netns) pr_ctlinput functions abuse the second arg instead of using the third arg but fixing this is beyond the scope of this round of changes.
1995-12-16 02:14:44 +00:00
(*pr->pr_ctlinput)(cmd, sa, (void *)0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
void
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pfctlinput2(int cmd, struct sockaddr *sa, void *ctlparam)
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
{
struct domain *dp;
struct protosw *pr;
if (!sa)
return;
for (dp = domains; dp; dp = dp->dom_next) {
/*
* the check must be made by xx_ctlinput() anyways, to
* make sure we use data item pointed to by ctlparam in
* correct way. the following check is made just for safety.
*/
if (dp->dom_family != sa->sa_family)
continue;
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
if (pr->pr_ctlinput)
(*pr->pr_ctlinput)(cmd, sa, ctlparam);
}
}
All net.* sysctl converted now.
1995-11-16 19:00:27 +00:00
static void
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pfslowtimo(void *arg)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
struct domain *dp;
struct protosw *pr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (dp = domains; dp; dp = dp->dom_next)
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
if (pr->pr_slowtimo)
(*pr->pr_slowtimo)();
Use callout_reset instead of timeout(9). Most callouts are statically allocated, 2 have been added to struct proc for setitimer and sleep. Reviewed by: jhb, jlemon
2000-11-27 22:52:31 +00:00
callout_reset(&pfslow_callout, hz/2, pfslowtimo, NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
All net.* sysctl converted now.
1995-11-16 19:00:27 +00:00
static void
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
pffasttimo(void *arg)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Generally migrate to ANSI function headers, and remove 'register' use.
2007-05-16 20:41:08 +00:00
struct domain *dp;
struct protosw *pr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (dp = domains; dp; dp = dp->dom_next)
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
if (pr->pr_fasttimo)
(*pr->pr_fasttimo)();
Use callout_reset instead of timeout(9). Most callouts are statically allocated, 2 have been added to struct proc for setitimer and sleep. Reviewed by: jhb, jlemon
2000-11-27 22:52:31 +00:00
callout_reset(&pffast_callout, hz/5, pffasttimo, NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reference in New Issue Copy Permalink