d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
10f4dbda56
freebsd-skq/sys/netipsec/ipsec_output.c

769 lines
20 KiB
C
Raw Normal View History

add missing copyright notices Noticed by: Robert Watson
2003-03-28 20:28:05 +00:00
/*-
* Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* IPsec output processing.
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/in_var.h>
#include <netinet/ip_ecn.h>
#ifdef INET6
#include <netinet6/ip6_ecn.h>
#endif
#include <netinet/ip6.h>
#ifdef INET6
#include <netinet6/ip6_var.h>
#endif
#include <netinet/in_pcb.h>
#ifdef INET6
#include <netinet/icmp6.h>
#endif
#include <netipsec/ipsec.h>
#ifdef INET6
#include <netipsec/ipsec6.h>
#endif
#include <netipsec/ah_var.h>
#include <netipsec/esp_var.h>
#include <netipsec/ipcomp_var.h>
#include <netipsec/xform.h>
#include <netipsec/key.h>
#include <netipsec/keydb.h>
#include <netipsec/key_debug.h>
#include <machine/in_cksum.h>
int
ipsec_process_done(struct mbuf *m, struct ipsecrequest *isr)
{
struct tdb_ident *tdbi;
struct m_tag *mtag;
struct secasvar *sav;
struct secasindex *saidx;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_SPLASSERT_SOFTNET(__func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(isr != NULL, ("null ISR"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav = isr->sav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("null SA"));
IPSEC_ASSERT(sav->sah != NULL, ("null SAH"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx = &sav->sah->saidx;
switch (saidx->dst.sa.sa_family) {
#ifdef INET
case AF_INET:
/* Fix the header length, for AH processing. */
mtod(m, struct ip *)->ip_len = htons(m->m_pkthdr.len);
break;
#endif /* INET */
#ifdef INET6
case AF_INET6:
/* Fix the header length, for AH processing. */
if (m->m_pkthdr.len < sizeof (struct ip6_hdr)) {
error = ENXIO;
goto bad;
}
if (m->m_pkthdr.len - sizeof (struct ip6_hdr) > IPV6_MAXPACKET) {
/* No jumbogram support. */
error = ENXIO; /*?*/
goto bad;
}
mtod(m, struct ip6_hdr *)->ip6_plen =
htons(m->m_pkthdr.len - sizeof(struct ip6_hdr));
break;
#endif /* INET6 */
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: unknown protocol family %u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx->dst.sa.sa_family));
error = ENXIO;
goto bad;
}
/*
* Add a record of what we've done or what needs to be done to the
* packet.
*/
mtag = m_tag_get(PACKET_TAG_IPSEC_OUT_DONE,
sizeof(struct tdb_ident), M_NOWAIT);
if (mtag == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: could not get packet tag\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOMEM;
goto bad;
}
tdbi = (struct tdb_ident *)(mtag + 1);
tdbi->dst = saidx->dst;
tdbi->proto = saidx->proto;
tdbi->spi = sav->spi;
m_tag_prepend(m, mtag);
/*
* If there's another (bundled) SA to apply, do so.
* Note that this puts a burden on the kernel stack size.
* If this is a problem we'll need to introduce a queue
* to set the packet on so we can unwind the stack before
* doing further processing.
*/
if (isr->next) {
newipsecstat.ips_out_bundlesa++;
return ipsec4_process_packet(m, isr->next, 0, 0);
}
correct transfer statistics Submitted by: Larry Baird <lab@gta.com> MFC after: 1 day
2003-06-30 05:05:19 +00:00
key_sa_recordxfer(sav, m); /* record data transfer */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* We're done with IPsec processing, transmit the packet using the
* appropriate network protocol (IP or IPv6). SPD lookup will be
* performed again there.
*/
switch (saidx->dst.sa.sa_family) {
#ifdef INET
struct ip *ip;
case AF_INET:
ip = mtod(m, struct ip *);
ip->ip_len = ntohs(ip->ip_len);
ip->ip_off = ntohs(ip->ip_off);
return ip_output(m, NULL, NULL, IP_RAWOUTPUT, NULL, NULL);
#endif /* INET */
#ifdef INET6
case AF_INET6:
/*
* We don't need massage, IPv6 header fields are always in
* net endian.
*/
return ip6_output(m, NULL, NULL, 0, NULL, NULL, NULL);
#endif /* INET6 */
}
panic("ipsec_process_done");
bad:
m_freem(m);
KEY_FREESAV(&sav);
return (error);
}
static struct ipsecrequest *
ipsec_nextisr(
struct mbuf *m,
struct ipsecrequest *isr,
int af,
struct secasindex *saidx,
int *error
)
{
#define IPSEC_OSTAT(x,y,z) (isr->saidx.proto == IPPROTO_ESP ? (x)++ : \
isr->saidx.proto == IPPROTO_AH ? (y)++ : (z)++)
struct secasvar *sav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_SPLASSERT_SOFTNET(__func__);
IPSECREQUEST_LOCK_ASSERT(isr);
IPSEC_ASSERT(af == AF_INET || af == AF_INET6,
("invalid address family %u", af));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
again:
/*
* Craft SA index to search for proper SA. Note that
* we only fillin unspecified SA peers for transport
* mode; for tunnel mode they must already be filled in.
*/
*saidx = isr->saidx;
if (isr->saidx.mode == IPSEC_MODE_TRANSPORT) {
/* Fillin unspecified SA peers only for transport mode */
if (af == AF_INET) {
struct sockaddr_in *sin;
struct ip *ip = mtod(m, struct ip *);
if (saidx->src.sa.sa_len == 0) {
sin = &saidx->src.sin;
sin->sin_len = sizeof(*sin);
sin->sin_family = AF_INET;
sin->sin_port = IPSEC_PORT_ANY;
sin->sin_addr = ip->ip_src;
}
if (saidx->dst.sa.sa_len == 0) {
sin = &saidx->dst.sin;
sin->sin_len = sizeof(*sin);
sin->sin_family = AF_INET;
sin->sin_port = IPSEC_PORT_ANY;
sin->sin_addr = ip->ip_dst;
}
} else {
struct sockaddr_in6 *sin6;
struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
if (saidx->src.sin6.sin6_len == 0) {
sin6 = (struct sockaddr_in6 *)&saidx->src;
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_family = AF_INET6;
sin6->sin6_port = IPSEC_PORT_ANY;
sin6->sin6_addr = ip6->ip6_src;
if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_src)) {
/* fix scope id for comparing SPD */
sin6->sin6_addr.s6_addr16[1] = 0;
sin6->sin6_scope_id =
ntohs(ip6->ip6_src.s6_addr16[1]);
}
}
if (saidx->dst.sin6.sin6_len == 0) {
sin6 = (struct sockaddr_in6 *)&saidx->dst;
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_family = AF_INET6;
sin6->sin6_port = IPSEC_PORT_ANY;
sin6->sin6_addr = ip6->ip6_dst;
if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_dst)) {
/* fix scope id for comparing SPD */
sin6->sin6_addr.s6_addr16[1] = 0;
sin6->sin6_scope_id =
ntohs(ip6->ip6_dst.s6_addr16[1]);
}
}
}
}
/*
* Lookup SA and validate it.
*/
*error = key_checkrequest(isr, saidx);
if (*error != 0) {
/*
* IPsec processing is required, but no SA found.
* I assume that key_acquire() had been called
* to get/establish the SA. Here I discard
* this packet because it is responsibility for
* upper layer to retransmit the packet.
*/
newipsecstat.ips_out_nosa++;
goto bad;
}
sav = isr->sav;
if (sav == NULL) { /* XXX valid return */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(ipsec_get_reqlevel(isr) == IPSEC_LEVEL_USE,
("no SA found, but required; level %u",
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_get_reqlevel(isr)));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
isr = isr->next;
if (isr == NULL) {
/*XXXstatistic??*/
*error = EINVAL; /*XXX*/
return isr;
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto again;
}
/*
* Check system global policy controls.
*/
if ((isr->saidx.proto == IPPROTO_ESP && !esp_enable) ||
(isr->saidx.proto == IPPROTO_AH && !ah_enable) ||
(isr->saidx.proto == IPPROTO_IPCOMP && !ipcomp_enable)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: IPsec outbound packet dropped due"
" to policy (check your sysctls)\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
IPSEC_OSTAT(espstat.esps_pdrops, ahstat.ahs_pdrops,
ipcompstat.ipcomps_pdrops);
*error = EHOSTUNREACH;
goto bad;
}
/*
* Sanity check the SA contents for the caller
* before they invoke the xform output method.
*/
if (sav->tdb_xform == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: no transform for SA\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
IPSEC_OSTAT(espstat.esps_noxform, ahstat.ahs_noxform,
ipcompstat.ipcomps_noxform);
*error = EHOSTUNREACH;
goto bad;
}
return isr;
bad:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(*error != 0, ("error return w/ no error code"));
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
#undef IPSEC_OSTAT
}
#ifdef INET
/*
* IPsec output logic for IPv4.
*/
int
ipsec4_process_packet(
struct mbuf *m,
struct ipsecrequest *isr,
int flags,
int tunalready)
{
struct secasindex saidx;
struct secasvar *sav;
struct ip *ip;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
int error, i, off;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(isr != NULL, ("null isr"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK(isr); /* insure SA contents don't change */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
isr = ipsec_nextisr(m, isr, AF_INET, &saidx, &error);
if (isr == NULL)
goto bad;
sav = isr->sav;
if (!tunalready) {
union sockaddr_union *dst = &sav->sah->saidx.dst;
int setdf;
/*
* Collect IP_DF state from the outer header.
*/
if (dst->sa.sa_family == AF_INET) {
if (m->m_len < sizeof (struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
error = ENOBUFS;
goto bad;
}
ip = mtod(m, struct ip *);
/* Honor system-wide control of how to handle IP_DF */
switch (ip4_ipsec_dfbit) {
case 0: /* clear in outer header */
case 1: /* set in outer header */
setdf = ip4_ipsec_dfbit;
break;
default: /* propagate to outer header */
setdf = ntohs(ip->ip_off & IP_DF);
break;
}
} else {
ip = NULL; /* keep compiler happy */
setdf = 0;
}
/* Do the appropriate encapsulation, if necessary */
if (isr->saidx.mode == IPSEC_MODE_TUNNEL || /* Tunnel requ'd */
dst->sa.sa_family != AF_INET || /* PF mismatch */
#if 0
(sav->flags & SADB_X_SAFLAGS_TUNNEL) || /* Tunnel requ'd */
sav->tdb_xform->xf_type == XF_IP4 || /* ditto */
#endif
(dst->sa.sa_family == AF_INET && /* Proxy */
dst->sin.sin_addr.s_addr != INADDR_ANY &&
dst->sin.sin_addr.s_addr != ip->ip_dst.s_addr)) {
struct mbuf *mp;
/* Fix IPv4 header checksum and length */
if (m->m_len < sizeof (struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
error = ENOBUFS;
goto bad;
}
ip = mtod(m, struct ip *);
ip->ip_len = htons(m->m_pkthdr.len);
ip->ip_sum = 0;
#ifdef _IP_VHL
if (ip->ip_vhl == IP_VHL_BORING)
ip->ip_sum = in_cksum_hdr(ip);
else
ip->ip_sum = in_cksum(m,
_IP_VHL_HL(ip->ip_vhl) << 2);
#else
ip->ip_sum = in_cksum(m, ip->ip_hl << 2);
#endif
/* Encapsulate the packet */
error = ipip_output(m, isr, &mp, 0, 0);
if (mp == NULL && !error) {
/* Should never happen. */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: ipip_output returns no mbuf and "
"no error!", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EFAULT;
}
if (error) {
Fix ipip_output() to always set *mp to NULL on failure, even if 'm' is NULL, otherwise ipsec4_process_packet() may try to m_freem() a bad pointer. In ipsec4_process_packet(), don't try to m_freem() 'm' twice; ipip_output() already did it. Obtained from: netbsd
2004-01-20 22:45:10 +00:00
if (mp) {
/* XXX: Should never happen! */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(mp);
Fix ipip_output() to always set *mp to NULL on failure, even if 'm' is NULL, otherwise ipsec4_process_packet() may try to m_freem() a bad pointer. In ipsec4_process_packet(), don't try to m_freem() 'm' twice; ipip_output() already did it. Obtained from: netbsd
2004-01-20 22:45:10 +00:00
}
m = NULL; /* ipip_output() already freed it */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto bad;
}
m = mp, mp = NULL;
/*
* ipip_output clears IP_DF in the new header. If
* we need to propagate IP_DF from the outer header,
* then we have to do it here.
*
* XXX shouldn't assume what ipip_output does.
*/
if (dst->sa.sa_family == AF_INET && setdf) {
if (m->m_len < sizeof (struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
error = ENOBUFS;
goto bad;
}
ip = mtod(m, struct ip *);
ip->ip_off = ntohs(ip->ip_off);
ip->ip_off |= IP_DF;
ip->ip_off = htons(ip->ip_off);
}
}
}
/*
* Dispatch to the appropriate IPsec transform logic. The
* packet will be returned for transmission after crypto
* processing, etc. are completed. For encapsulation we
* bypass this call because of the explicit call done above
* (necessary to deal with IP_DF handling for IPv4).
*
* NB: m & sav are ``passed to caller'' who's reponsible for
* for reclaiming their resources.
*/
if (sav->tdb_xform->xf_type != XF_IP4) {
ip = mtod(m, struct ip *);
i = ip->ip_hl << 2;
off = offsetof(struct ip, ip_p);
error = (*sav->tdb_xform->xf_output)(m, isr, NULL, i, off);
} else {
error = ipsec_process_done(m, isr);
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return error;
bad:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
if (isr)
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m)
m_freem(m);
return error;
}
#endif
#ifdef INET6
/*
* Chop IP6 header from the payload.
*/
static struct mbuf *
ipsec6_splithdr(struct mbuf *m)
{
struct mbuf *mh;
struct ip6_hdr *ip6;
int hlen;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m->m_len >= sizeof (struct ip6_hdr),
("first mbuf too short, len %u", m->m_len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ip6 = mtod(m, struct ip6_hdr *);
hlen = sizeof(struct ip6_hdr);
if (m->m_len > hlen) {
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
MGETHDR(mh, M_DONTWAIT, MT_HEADER);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!mh) {
m_freem(m);
return NULL;
}
Correct mbuf packet header propagation. Previously, packet headers were sometimes propagated using M_COPY_PKTHDR which actually did something between a "move" and a "copy" operation. This is replaced by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it from the source mbuf) and m_dup_pkthdr which copies the packet header contents including any m_tag chain. This corrects numerous problems whereby mbuf tags could be lost during packet manipulations. These changes also introduce arguments to m_tag_copy and m_tag_copy_chain to specify if the tag copy work should potentially block. This introduces an incompatibility with openbsd which we may want to revisit. Note that move/dup of packet headers does not handle target mbufs that have a cluster bound to them. We may want to support this; for now we watch for it with an assert. Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG. Supported by: Vernier Networks Reviewed by: Robert Watson <rwatson@FreeBSD.org>
2002-12-30 20:22:40 +00:00
M_MOVE_PKTHDR(mh, m);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MH_ALIGN(mh, hlen);
m->m_len -= hlen;
m->m_data += hlen;
mh->m_next = m;
m = mh;
m->m_len = hlen;
bcopy((caddr_t)ip6, mtod(m, caddr_t), hlen);
} else if (m->m_len < hlen) {
m = m_pullup(m, hlen);
if (!m)
return NULL;
}
return m;
}
/*
* IPsec output logic for IPv6, transport mode.
*/
int
ipsec6_output_trans(
struct ipsec_output_state *state,
u_char *nexthdrp,
struct mbuf *mprev,
struct secpolicy *sp,
int flags,
int *tun)
{
struct ipsecrequest *isr;
struct secasindex saidx;
int error = 0;
struct mbuf *m;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(state != NULL, ("null state"));
IPSEC_ASSERT(state->m != NULL, ("null m"));
IPSEC_ASSERT(nexthdrp != NULL, ("null nexthdrp"));
IPSEC_ASSERT(mprev != NULL, ("null mprev"));
IPSEC_ASSERT(sp != NULL, ("null sp"));
IPSEC_ASSERT(tun != NULL, ("null tun"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_DATA,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("%s: applyed SP\n", __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
kdebug_secpolicy(sp));
isr = sp->req;
if (isr->saidx.mode == IPSEC_MODE_TUNNEL) {
/* the rest will be handled by ipsec6_output_tunnel() */
*tun = 1; /* need tunnel-mode processing */
return 0;
}
*tun = 0;
m = state->m;
isr = ipsec_nextisr(m, isr, AF_INET6, &saidx, &error);
if (isr == NULL) {
#ifdef notdef
/* XXX should notification be done for all errors ? */
/*
* Notify the fact that the packet is discarded
* to ourselves. I believe this is better than
* just silently discarding. (jinmei@kame.net)
* XXX: should we restrict the error to TCP packets?
* XXX: should we directly notify sockets via
* pfctlinputs?
*/
icmp6_error(m, ICMP6_DST_UNREACH,
ICMP6_DST_UNREACH_ADMIN, 0);
m = NULL; /* NB: icmp6_error frees mbuf */
#endif
goto bad;
}
return (*isr->sav->tdb_xform->xf_output)(m, isr, NULL,
sizeof (struct ip6_hdr),
offsetof(struct ip6_hdr, ip6_nxt));
bad:
if (m)
m_freem(m);
state->m = NULL;
return error;
}
static int
ipsec6_encapsulate(struct mbuf *m, struct secasvar *sav)
{
struct ip6_hdr *oip6;
struct ip6_hdr *ip6;
size_t plen;
/* can't tunnel between different AFs */
if (sav->sah->saidx.src.sa.sa_family != AF_INET6 ||
sav->sah->saidx.dst.sa.sa_family != AF_INET6) {
m_freem(m);
return EINVAL;
}
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m->m_len != sizeof (struct ip6_hdr),
("mbuf wrong size; len %u", m->m_len));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* grow the mbuf to accomodate the new IPv6 header.
*/
plen = m->m_pkthdr.len;
if (M_LEADINGSPACE(m->m_next) < sizeof(struct ip6_hdr)) {
struct mbuf *n;
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
MGET(n, M_DONTWAIT, MT_DATA);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (!n) {
m_freem(m);
return ENOBUFS;
}
n->m_len = sizeof(struct ip6_hdr);
n->m_next = m->m_next;
m->m_next = n;
m->m_pkthdr.len += sizeof(struct ip6_hdr);
oip6 = mtod(n, struct ip6_hdr *);
} else {
m->m_next->m_len += sizeof(struct ip6_hdr);
m->m_next->m_data -= sizeof(struct ip6_hdr);
m->m_pkthdr.len += sizeof(struct ip6_hdr);
oip6 = mtod(m->m_next, struct ip6_hdr *);
}
ip6 = mtod(m, struct ip6_hdr *);
ovbcopy -> bcopy
2003-04-04 12:56:20 +00:00
bcopy((caddr_t)ip6, (caddr_t)oip6, sizeof(struct ip6_hdr));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Fake link-local scope-class addresses */
if (IN6_IS_SCOPE_LINKLOCAL(&oip6->ip6_src))
oip6->ip6_src.s6_addr16[1] = 0;
if (IN6_IS_SCOPE_LINKLOCAL(&oip6->ip6_dst))
oip6->ip6_dst.s6_addr16[1] = 0;
/* construct new IPv6 header. see RFC 2401 5.1.2.2 */
/* ECN consideration. */
ip6_ecn_ingress(ip6_ipsec_ecn, &ip6->ip6_flow, &oip6->ip6_flow);
if (plen < IPV6_MAXPACKET - sizeof(struct ip6_hdr))
ip6->ip6_plen = htons(plen);
else {
/* ip6->ip6_plen will be updated in ip6_output() */
}
ip6->ip6_nxt = IPPROTO_IPV6;
sav->sah->saidx.src.sin6.sin6_addr = ip6->ip6_src;
sav->sah->saidx.dst.sin6.sin6_addr = ip6->ip6_dst;
ip6->ip6_hlim = IPV6_DEFHLIM;
/* XXX Should ip6_src be updated later ? */
return 0;
}
/*
* IPsec output logic for IPv6, tunnel mode.
*/
int
ipsec6_output_tunnel(struct ipsec_output_state *state, struct secpolicy *sp, int flags)
{
struct ip6_hdr *ip6;
struct ipsecrequest *isr;
struct secasindex saidx;
int error;
struct sockaddr_in6* dst6;
struct mbuf *m;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(state != NULL, ("null state"));
IPSEC_ASSERT(state->m != NULL, ("null m"));
IPSEC_ASSERT(sp != NULL, ("null sp"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEYDEBUG(KEYDEBUG_IPSEC_DATA,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
printf("%s: applyed SP\n", __func__);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
kdebug_secpolicy(sp));
m = state->m;
/*
* transport mode ipsec (before the 1st tunnel mode) is already
* processed by ipsec6_output_trans().
*/
for (isr = sp->req; isr; isr = isr->next) {
if (isr->saidx.mode == IPSEC_MODE_TUNNEL)
break;
}
isr = ipsec_nextisr(m, isr, AF_INET6, &saidx, &error);
if (isr == NULL)
goto bad;
/*
* There may be the case that SA status will be changed when
* we are refering to one. So calling splsoftnet().
*/
if (isr->saidx.mode == IPSEC_MODE_TUNNEL) {
/*
* build IPsec tunnel.
*/
/* XXX should be processed with other familiy */
if (isr->sav->sah->saidx.src.sa.sa_family != AF_INET6) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
ipseclog((LOG_ERR, "%s: family mismatched between "
"inner and outer, spi=%u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ntohl(isr->sav->spi)));
newipsecstat.ips_out_inval++;
error = EAFNOSUPPORT;
goto bad;
}
m = ipsec6_splithdr(m);
if (!m) {
newipsecstat.ips_out_nomem++;
error = ENOMEM;
goto bad;
}
error = ipsec6_encapsulate(m, isr->sav);
if (error) {
m = NULL;
goto bad;
}
ip6 = mtod(m, struct ip6_hdr *);
state->ro = &isr->sav->sah->sa_route;
state->dst = (struct sockaddr *)&state->ro->ro_dst;
dst6 = (struct sockaddr_in6 *)state->dst;
if (state->ro->ro_rt
&& ((state->ro->ro_rt->rt_flags & RTF_UP) == 0
|| !IN6_ARE_ADDR_EQUAL(&dst6->sin6_addr, &ip6->ip6_dst))) {
RTFREE(state->ro->ro_rt);
state->ro->ro_rt = NULL;
}
if (state->ro->ro_rt == 0) {
bzero(dst6, sizeof(*dst6));
dst6->sin6_family = AF_INET6;
dst6->sin6_len = sizeof(*dst6);
dst6->sin6_addr = ip6->ip6_dst;
rtalloc(state->ro);
}
if (state->ro->ro_rt == 0) {
ip6stat.ip6s_noroute++;
newipsecstat.ips_out_noroute++;
error = EHOSTUNREACH;
goto bad;
}
/* adjust state->dst if tunnel endpoint is offlink */
if (state->ro->ro_rt->rt_flags & RTF_GATEWAY) {
state->dst = (struct sockaddr *)state->ro->ro_rt->rt_gateway;
dst6 = (struct sockaddr_in6 *)state->dst;
}
}
m = ipsec6_splithdr(m);
if (!m) {
newipsecstat.ips_out_nomem++;
error = ENOMEM;
goto bad;
}
ip6 = mtod(m, struct ip6_hdr *);
return (*isr->sav->tdb_xform->xf_output)(m, isr, NULL,
sizeof (struct ip6_hdr),
offsetof(struct ip6_hdr, ip6_nxt));
bad:
if (m)
m_freem(m);
state->m = NULL;
return error;
}
#endif /*INET6*/
Reference in New Issue Copy Permalink