d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
11c15f90db
freebsd-skq/sys/i386/include/apicvar.h

231 lines
8.8 KiB
C
Raw Normal View History

New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
/*-
* Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_APICVAR_H_
#define _MACHINE_APICVAR_H_
/*
* Local && I/O APIC variable definitions.
*/
/*
* Layout of local APIC interrupt vectors:
*
* 0xff (255) +-------------+
Whitespace nit (sorry, couldn't help it)
2003-11-14 22:21:30 +00:00
* | | 15 (Spurious / IPIs / Local Interrupts)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
* 0xf0 (240) +-------------+
- Add a function to set the Task Priority Register (TPR) of the local APIC. Currently this is only used to initiailize the TPR to 0 during initial setup. - Reallocate vectors for the local APIC timer, error, and thermal LVT entries. The timer entry is allocated from the top of the I/O interrupt range reducing the number of vectors available for hardware interrupts to 191. Linux happens to use the same exact vector for its timer interrupt as well. If the timer vector shared the same priority queue as the IPI handlers, then the frequency that the timer vector will eventually be firing at can interact badly with the IPIs resulting in the queue filling and the dreaded IPI stuck panics, hence it being located at the top of the previous priority queue instead. - Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00
* | | 14 (I/O Interrupts / Timer)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
* 0xe0 (224) +-------------+
Shuffle the APIC interrupt vectors around a bit: - Move the IPI and local APIC interrupt vectors up into the 0xf0 - 0xff range. The pmap lazyfix IPI was reordered down next to the TLB shootdowns to avoid conflicting with the spurious interrupt vector. - Move the base of APIC interrupts up 16 so that the first 16 APIC interrupts do not overlap the vectors used by the ATPIC. - Remove bogus interrupt vector reservations for LINT[01]. - Now that 0xc0 - 0xef are available, use them for device interrupts. This increases the number of APIC device interrupts to 191. - Increase the system-wide number of global interrupts to 191 to catch up to more APIC interrupts. Requested by: peter (2)
2003-11-14 19:10:13 +00:00
* | | 13 (I/O Interrupts)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
* 0xd0 (208) +-------------+
Shuffle the APIC interrupt vectors around a bit: - Move the IPI and local APIC interrupt vectors up into the 0xf0 - 0xff range. The pmap lazyfix IPI was reordered down next to the TLB shootdowns to avoid conflicting with the spurious interrupt vector. - Move the base of APIC interrupts up 16 so that the first 16 APIC interrupts do not overlap the vectors used by the ATPIC. - Remove bogus interrupt vector reservations for LINT[01]. - Now that 0xc0 - 0xef are available, use them for device interrupts. This increases the number of APIC device interrupts to 191. - Increase the system-wide number of global interrupts to 191 to catch up to more APIC interrupts. Requested by: peter (2)
2003-11-14 19:10:13 +00:00
* | | 12 (I/O Interrupts)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
* 0xc0 (192) +-------------+
* | | 11 (I/O Interrupts)
* 0xb0 (176) +-------------+
* | | 10 (I/O Interrupts)
* 0xa0 (160) +-------------+
* | | 9 (I/O Interrupts)
* 0x90 (144) +-------------+
* | | 8 (I/O Interrupts / System Calls)
* 0x80 (128) +-------------+
* | | 7 (I/O Interrupts)
* 0x70 (112) +-------------+
* | | 6 (I/O Interrupts)
* 0x60 (96) +-------------+
* | | 5 (I/O Interrupts)
* 0x50 (80) +-------------+
* | | 4 (I/O Interrupts)
* 0x40 (64) +-------------+
* | | 3 (I/O Interrupts)
* 0x30 (48) +-------------+
Shuffle the APIC interrupt vectors around a bit: - Move the IPI and local APIC interrupt vectors up into the 0xf0 - 0xff range. The pmap lazyfix IPI was reordered down next to the TLB shootdowns to avoid conflicting with the spurious interrupt vector. - Move the base of APIC interrupts up 16 so that the first 16 APIC interrupts do not overlap the vectors used by the ATPIC. - Remove bogus interrupt vector reservations for LINT[01]. - Now that 0xc0 - 0xef are available, use them for device interrupts. This increases the number of APIC device interrupts to 191. - Increase the system-wide number of global interrupts to 191 to catch up to more APIC interrupts. Requested by: peter (2)
2003-11-14 19:10:13 +00:00
* | | 2 (ATPIC Interrupts)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
* 0x20 (32) +-------------+
* | | 1 (Exceptions, traps, faults, etc.)
* 0x10 (16) +-------------+
* | | 0 (Exceptions, traps, faults, etc.)
* 0x00 (0) +-------------+
*
* Note: 0x80 needs to be handled specially and not allocated to an
* I/O device!
*/
Handle CPUs with APIC IDs higher than 32 (at least one IBM server uses an APIC ID of 38 for its second CPU): - Add a new MAX_APIC_ID constant for the highest valid APIC ID for modern systems. - Size the various arrays in the MADT, MP Table, and SMP code that are indexed by APIC IDs to allow for up to MAX_APIC_ID. - Explicitly go through and assign logical cpu ids to local APICs before starting any of the APs up rather than doing it while starting up the APs. This step is now where we honor MAXCPU. MFC after: 1 week
2007-05-08 22:01:04 +00:00
#define MAX_APIC_ID 0xfe
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
#define APIC_ID_ALL 0xff
- Add a function to set the Task Priority Register (TPR) of the local APIC. Currently this is only used to initiailize the TPR to 0 during initial setup. - Reallocate vectors for the local APIC timer, error, and thermal LVT entries. The timer entry is allocated from the top of the I/O interrupt range reducing the number of vectors available for hardware interrupts to 191. Linux happens to use the same exact vector for its timer interrupt as well. If the timer vector shared the same priority queue as the IPI handlers, then the frequency that the timer vector will eventually be firing at can interact badly with the IPIs resulting in the queue filling and the dreaded IPI stuck panics, hence it being located at the top of the previous priority queue instead. - Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00
/* I/O Interrupts are used for external devices such as ISA, PCI, etc. */
Shuffle the APIC interrupt vectors around a bit: - Move the IPI and local APIC interrupt vectors up into the 0xf0 - 0xff range. The pmap lazyfix IPI was reordered down next to the TLB shootdowns to avoid conflicting with the spurious interrupt vector. - Move the base of APIC interrupts up 16 so that the first 16 APIC interrupts do not overlap the vectors used by the ATPIC. - Remove bogus interrupt vector reservations for LINT[01]. - Now that 0xc0 - 0xef are available, use them for device interrupts. This increases the number of APIC device interrupts to 191. - Increase the system-wide number of global interrupts to 191 to catch up to more APIC interrupts. Requested by: peter (2)
2003-11-14 19:10:13 +00:00
#define APIC_IO_INTS (IDT_IO_INTS + 16)
- Add a function to set the Task Priority Register (TPR) of the local APIC. Currently this is only used to initiailize the TPR to 0 during initial setup. - Reallocate vectors for the local APIC timer, error, and thermal LVT entries. The timer entry is allocated from the top of the I/O interrupt range reducing the number of vectors available for hardware interrupts to 191. Linux happens to use the same exact vector for its timer interrupt as well. If the timer vector shared the same priority queue as the IPI handlers, then the frequency that the timer vector will eventually be firing at can interact badly with the IPIs resulting in the queue filling and the dreaded IPI stuck panics, hence it being located at the top of the previous priority queue instead. - Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00
#define APIC_NUM_IOINTS 191
/* The timer interrupt is used for clock handling and drives hardclock, etc. */
#define APIC_TIMER_INT (APIC_IO_INTS + APIC_NUM_IOINTS)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
/*
********************* !!! WARNING !!! ******************************
* Each local apic has an interrupt receive fifo that is two entries deep
* for each interrupt priority class (higher 4 bits of interrupt vector).
* Once the fifo is full the APIC can no longer receive interrupts for this
* class and sending IPIs from other CPUs will be blocked.
* To avoid deadlocks there should be no more than two IPI interrupts
* pending at the same time.
* Currently this is guaranteed by dividing the IPIs in two groups that have
* each at most one IPI interrupt pending. The first group is protected by the
* smp_ipi_mtx and waits for the completion of the IPI (Only one IPI user
* at a time) The second group uses a single interrupt and a bitmap to avoid
* redundant IPI interrupts.
*/
- Add a function to set the Task Priority Register (TPR) of the local APIC. Currently this is only used to initiailize the TPR to 0 during initial setup. - Reallocate vectors for the local APIC timer, error, and thermal LVT entries. The timer entry is allocated from the top of the I/O interrupt range reducing the number of vectors available for hardware interrupts to 191. Linux happens to use the same exact vector for its timer interrupt as well. If the timer vector shared the same priority queue as the IPI handlers, then the frequency that the timer vector will eventually be firing at can interact badly with the IPIs resulting in the queue filling and the dreaded IPI stuck panics, hence it being located at the top of the previous priority queue instead. - Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00
/* Interrupts for local APIC LVT entries other than the timer. */
Decouple the i386 native and i386 Xen APIC definitions a little further. I'm experimenting locally with xen APIC emulation a bit and this makes it easier to migrate APIC entries between being bitmapped and not being bitmapped.
2009-06-07 22:52:48 +00:00
#define APIC_LOCAL_INTS 240
#define APIC_ERROR_INT APIC_LOCAL_INTS
#define APIC_THERMAL_INT (APIC_LOCAL_INTS + 1)
Add support for corrected machine check interrupts. CMCI is a new local APIC interrupt that fires when a threshold of corrected machine check events is reached. CMCI also includes a count of events when reporting corrected errors in the bank's status register. Note that individual banks may or may not support CMCI. If they do, each bank includes its own threshold register that determines when the interrupt fires. Currently the code uses a very simple strategy where it doubles the threshold on each interrupt until it succeeds in throttling the interrupt to occur only once a minute (this interval can be tuned via sysctl). The threshold is also adjusted on each hourly poll which will lower the threshold once events stop occurring. Tested by: Sailaja Bangaru sbappana at yahoo com MFC after: 1 month
2010-05-24 15:45:05 +00:00
#define APIC_CMC_INT (APIC_LOCAL_INTS + 2)
#define APIC_IPI_INTS (APIC_LOCAL_INTS + 3)
Decouple the i386 native and i386 Xen APIC definitions a little further. I'm experimenting locally with xen APIC emulation a bit and this makes it easier to migrate APIC entries between being bitmapped and not being bitmapped.
2009-06-07 22:52:48 +00:00
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
#define IPI_RENDEZVOUS (APIC_IPI_INTS) /* Inter-CPU rendezvous. */
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
#define IPI_INVLTLB (APIC_IPI_INTS + 1) /* TLB Shootdown IPIs */
#define IPI_INVLPG (APIC_IPI_INTS + 2)
#define IPI_INVLRNG (APIC_IPI_INTS + 3)
Add a new 'pmap_invalidate_cache()' to flush the CPU caches via the wbinvd() instruction. This includes a new IPI so that all CPU caches on all CPUs are flushed for the SMP case. MFC after: 1 month
2006-05-01 21:36:47 +00:00
#define IPI_INVLCACHE (APIC_IPI_INTS + 4)
#define IPI_LAZYPMAP (APIC_IPI_INTS + 5) /* Lazy pmap release. */
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
/* Vector to handle bitmap based IPIs */
Add a new 'pmap_invalidate_cache()' to flush the CPU caches via the wbinvd() instruction. This includes a new IPI so that all CPU caches on all CPUs are flushed for the SMP case. MFC after: 1 month
2006-05-01 21:36:47 +00:00
#define IPI_BITMAP_VECTOR (APIC_IPI_INTS + 6)
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
/* IPIs handled by IPI_BITMAPED_VECTOR (XXX ups is there a better place?) */
#define IPI_AST 0 /* Generate software trap. */
Add IPI support for preempting a thread on another CPU. MFC after: 3 weeks
2005-06-09 18:23:54 +00:00
#define IPI_PREEMPT 1
Add support for using i8254 and rtc timers as event sources for i386 SMP system. Redistribute hard-/stat-/profclock events to other CPUs using IPI.
2009-05-02 12:59:47 +00:00
#define IPI_HARDCLOCK 2
Refactor timer management code with priority to one-shot operation mode. The main goal of this is to generate timer interrupts only when there is some work to do. When CPU is busy interrupts are generating at full rate of hz + stathz to fullfill scheduler and timekeeping requirements. But when CPU is idle, only minimum set of interrupts (down to 8 interrupts per second per CPU now), needed to handle scheduled callouts is executed. This allows significantly increase idle CPU sleep time, increasing effect of static power-saving technologies. Also it should reduce host CPU load on virtualized systems, when guest system is idle. There is set of tunables, also available as writable sysctls, allowing to control wanted event timer subsystem behavior: kern.eventtimer.timer - allows to choose event timer hardware to use. On x86 there is up to 4 different kinds of timers. Depending on whether chosen timer is per-CPU, behavior of other options slightly differs. kern.eventtimer.periodic - allows to choose periodic and one-shot operation mode. In periodic mode, current timer hardware taken as the only source of time for time events. This mode is quite alike to previous kernel behavior. One-shot mode instead uses currently selected time counter hardware to schedule all needed events one by one and program timer to generate interrupt exactly in specified time. Default value depends of chosen timer capabilities, but one-shot mode is preferred, until other is forced by user or hardware. kern.eventtimer.singlemul - in periodic mode specifies how much times higher timer frequency should be, to not strictly alias hardclock() and statclock() events. Default values are 2 and 4, but could be reduced to 1 if extra interrupts are unwanted. kern.eventtimer.idletick - makes each CPU to receive every timer interrupt independently of whether they busy or not. By default this options is disabled. If chosen timer is per-CPU and runs in periodic mode, this option has no effect - all interrupts are generating. As soon as this patch modifies cpu_idle() on some platforms, I have also refactored one on x86. Now it makes use of MONITOR/MWAIT instrunctions (if supported) under high sleep/wakeup rate, as fast alternative to other methods. It allows SMP scheduler to wake up sleeping CPUs much faster without using IPI, significantly increasing performance on some highly task-switching loads. Tested by: many (on i386, amd64, sparc64 and powerc) H/W donated by: Gheorghe Ardelean Sponsored by: iXsystems, Inc.
2010-09-13 07:25:35 +00:00
#define IPI_BITMAP_LAST IPI_HARDCLOCK
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
#define IPI_IS_BITMAPED(x) ((x) <= IPI_BITMAP_LAST)
Add a new 'pmap_invalidate_cache()' to flush the CPU caches via the wbinvd() instruction. This includes a new IPI so that all CPU caches on all CPUs are flushed for the SMP case. MFC after: 1 month
2006-05-01 21:36:47 +00:00
#define IPI_STOP (APIC_IPI_INTS + 7) /* Stop CPU until restarted. */
* Completely Remove the option STOP_NMI from the kernel. This option has proven to have a good effect when entering KDB by using a NMI, but it completely violates all the good rules about interrupts disabled while holding a spinlock in other occasions. This can be the cause of deadlocks on events where a normal IPI_STOP is expected. * Adds an new IPI called IPI_STOP_HARD on all the supported architectures. This IPI is responsible for sending a stop message among CPUs using a privileged channel when disponible. In other cases it just does match a normal IPI_STOP. Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64 architectures, while on the other has a normal IPI_STOP effect. It is responsibility of maintainers to eventually implement an hard stop when necessary and possible. * Use the new IPI facility in order to implement a new userend SMP kernel function called stop_cpus_hard(). That is specular to stop_cpu() but it does use the privileged channel for the stopping facility. * Let KDB use the newly introduced function stop_cpus_hard() and leave stop_cpus() for all the other cases * Disable interrupts on CPU0 when starting the process of APs suspension. * Style cleanup and comments adding This patch should fix the reboot/shutdown deadlocks many users are constantly reporting on mailing lists. Please don't forget to update your config file with the STOP_NMI option removal Reviewed by: jhb Tested by: pho, bz, rink Approved by: re (kib)
2009-08-13 17:09:45 +00:00
#define IPI_STOP_HARD (APIC_IPI_INTS + 8) /* Stop CPU with a NMI. */
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
- Add a function to set the Task Priority Register (TPR) of the local APIC. Currently this is only used to initiailize the TPR to 0 during initial setup. - Reallocate vectors for the local APIC timer, error, and thermal LVT entries. The timer entry is allocated from the top of the I/O interrupt range reducing the number of vectors available for hardware interrupts to 191. Linux happens to use the same exact vector for its timer interrupt as well. If the timer vector shared the same priority queue as the IPI handlers, then the frequency that the timer vector will eventually be firing at can interact badly with the IPIs resulting in the queue filling and the dreaded IPI stuck panics, hence it being located at the top of the previous priority queue instead. - Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00
/*
* The spurious interrupt can share the priority class with the IPIs since
Avoid more than two pending IPI interrupt vectors per local APIC as this may cause deadlocks. This should fix kern/72123. Discussed with: jhb Tested by: Nik Azim Azam, Andy Farkas, Flack Man, Aykut KARA Izzet BESKARDES, Jens Binnewies, Karl Keusgen Approved by: sam (mentor)
2004-12-07 20:15:01 +00:00
* it is not a normal interrupt. (Does not use the APIC's interrupt fifo)
*/
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
#define APIC_SPURIOUS_INT 255
#define LVT_LINT0 0
#define LVT_LINT1 1
#define LVT_TIMER 2
#define LVT_ERROR 3
#define LVT_PMC 4
#define LVT_THERMAL 5
Add support for corrected machine check interrupts. CMCI is a new local APIC interrupt that fires when a threshold of corrected machine check events is reached. CMCI also includes a count of events when reporting corrected errors in the bank's status register. Note that individual banks may or may not support CMCI. If they do, each bank includes its own threshold register that determines when the interrupt fires. Currently the code uses a very simple strategy where it doubles the threshold on each interrupt until it succeeds in throttling the interrupt to occur only once a minute (this interval can be tuned via sysctl). The threshold is also adjusted on each hourly poll which will lower the threshold once events stop occurring. Tested by: Sailaja Bangaru sbappana at yahoo com MFC after: 1 month
2010-05-24 15:45:05 +00:00
#define LVT_CMCI 6
#define LVT_MAX LVT_CMCI
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
#ifndef LOCORE
#define APIC_IPI_DEST_SELF -1
#define APIC_IPI_DEST_ALL -2
#define APIC_IPI_DEST_OTHERS -3
Various cleanups in support of a future ioapic_config_intr() function: - Allow ioapic_set_{nmi,smi,extint}() to be called multiple times on the same pin so long as the pin's mode is the same as the mode being requested. - Add a notion of bus type for the interrupt associated with interrupt pin. This is needed so that we can force all EISA interrupts to be active high in the forthcoming ioapic_config_intr(). - Fix a bug for EISA systems that didn't remap IRQs. This would have broken EISA systems that tried to disable mixed mode for IRQ 0.
2004-06-23 15:29:20 +00:00
#define APIC_BUS_UNKNOWN -1
#define APIC_BUS_ISA 0
#define APIC_BUS_EISA 1
#define APIC_BUS_PCI 2
#define APIC_BUS_MAX APIC_BUS_PCI
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
/*
* An APIC enumerator is a psuedo bus driver that enumerates APIC's including
* CPU's and I/O APIC's.
*/
struct apic_enumerator {
const char *apic_name;
int (*apic_probe)(void);
int (*apic_probe_cpus)(void);
int (*apic_setup_local)(void);
int (*apic_setup_io)(void);
SLIST_ENTRY(apic_enumerator) apic_next;
};
inthand_t
IDTVEC(apic_isr1), IDTVEC(apic_isr2), IDTVEC(apic_isr3),
Shuffle the APIC interrupt vectors around a bit: - Move the IPI and local APIC interrupt vectors up into the 0xf0 - 0xff range. The pmap lazyfix IPI was reordered down next to the TLB shootdowns to avoid conflicting with the spurious interrupt vector. - Move the base of APIC interrupts up 16 so that the first 16 APIC interrupts do not overlap the vectors used by the ATPIC. - Remove bogus interrupt vector reservations for LINT[01]. - Now that 0xc0 - 0xef are available, use them for device interrupts. This increases the number of APIC device interrupts to 191. - Increase the system-wide number of global interrupts to 191 to catch up to more APIC interrupts. Requested by: peter (2)
2003-11-14 19:10:13 +00:00
IDTVEC(apic_isr4), IDTVEC(apic_isr5), IDTVEC(apic_isr6),
Add support for corrected machine check interrupts. CMCI is a new local APIC interrupt that fires when a threshold of corrected machine check events is reached. CMCI also includes a count of events when reporting corrected errors in the bank's status register. Note that individual banks may or may not support CMCI. If they do, each bank includes its own threshold register that determines when the interrupt fires. Currently the code uses a very simple strategy where it doubles the threshold on each interrupt until it succeeds in throttling the interrupt to occur only once a minute (this interval can be tuned via sysctl). The threshold is also adjusted on each hourly poll which will lower the threshold once events stop occurring. Tested by: Sailaja Bangaru sbappana at yahoo com MFC after: 1 month
2010-05-24 15:45:05 +00:00
IDTVEC(apic_isr7), IDTVEC(cmcint), IDTVEC(errorint),
IDTVEC(spuriousint), IDTVEC(timerint);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
Add a new apic0 psuedo-device to claim memory resources for the memory address ranges used by local and I/O APICs in the system. Some systems also reserve these ranges as system resources via either PnPBIOS or ACPI, so this device currently attaches after acpi0 and legacy0 so that the system resources are given precedence.
2007-03-20 21:53:31 +00:00
extern vm_paddr_t lapic_paddr;
- Allocate apic vectors on a per-cpu basis. This allows us to allocate more irqs as we have more cpus. This is principally useful on systems with msi devices which may want many irqs per-cpu. Discussed with: jhb Sponsored by: Nokia
2009-01-29 09:22:56 +00:00
extern int apic_cpuids[];
u_int apic_alloc_vector(u_int apic_id, u_int irq);
u_int apic_alloc_vectors(u_int apic_id, u_int *irqs, u_int count,
u_int align);
void apic_disable_vector(u_int apic_id, u_int vector);
void apic_enable_vector(u_int apic_id, u_int vector);
void apic_free_vector(u_int apic_id, u_int vector, u_int irq);
u_int apic_idt_to_irq(u_int apic_id, u_int vector);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
void apic_register_enumerator(struct apic_enumerator *enumerator);
- Allocate apic vectors on a per-cpu basis. This allows us to allocate more irqs as we have more cpus. This is principally useful on systems with msi devices which may want many irqs per-cpu. Discussed with: jhb Sponsored by: Nokia
2009-01-29 09:22:56 +00:00
u_int apic_cpuid(u_int apic_id);
Use vm_paddr_t rather than uintptr_t when passing the physical address of APICs to lapic_init() and ioapic_create().
2007-03-05 20:35:17 +00:00
void *ioapic_create(vm_paddr_t addr, int32_t apic_id, int intbase);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
int ioapic_disable_pin(void *cookie, u_int pin);
int ioapic_get_vector(void *cookie, u_int pin);
void ioapic_register(void *cookie);
int ioapic_remap_vector(void *cookie, u_int pin, int vector);
Various cleanups in support of a future ioapic_config_intr() function: - Allow ioapic_set_{nmi,smi,extint}() to be called multiple times on the same pin so long as the pin's mode is the same as the mode being requested. - Add a notion of bus type for the interrupt associated with interrupt pin. This is needed so that we can force all EISA interrupts to be active high in the forthcoming ioapic_config_intr(). - Fix a bug for EISA systems that didn't remap IRQs. This would have broken EISA systems that tried to disable mixed mode for IRQ 0.
2004-06-23 15:29:20 +00:00
int ioapic_set_bus(void *cookie, u_int pin, int bus_type);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
int ioapic_set_extint(void *cookie, u_int pin);
int ioapic_set_nmi(void *cookie, u_int pin);
- Change the APIC code to mostly use the recently added intr_trigger and intr_polarity enums for passing around interrupt trigger modes and polarity rather than using the magic numbers 0 for level/low and 1 for edge/high. - Convert the mptable parsing code to use the new ELCR wrapper code rather than reading the ELCR directly. Also, use the ELCR settings to control both the trigger and polarity of EISA IRQs instead of just the trigger mode. - Rework the MADT's handling of the ACPI SCI again: - If no override entry for the SCI exists at all, use level/low trigger instead of the default edge/high used for ISA IRQs. - For the ACPI SCI, use level/low values for conforming trigger and polarity rather than the edge/high values we use for all other ISA IRQs. - Rework the tunables available to override the MADT. The hw.acpi.force_sci_lo tunable is no longer supported. Instead, there are now two tunables that can independently override the trigger mode and/or polarity of the SCI. The hw.acpi.sci.trigger tunable can be set to either "edge" or "level", and the hw.acpi.sci.polarity tunable can be set to either "high" or "low". To simulate hw.acpi.force_sci_lo, set hw.acpi.sci.trigger to "level" and hw.acpi.sci.polarity to "low". If you are having problems with ACPI either causing an interrupt storm or not working at all (e.g., the power button doesn't turn invoke a shutdown -p now), you can try tweaking these two tunables to find the combination that works.
2004-05-04 20:39:24 +00:00
int ioapic_set_polarity(void *cookie, u_int pin, enum intr_polarity pol);
int ioapic_set_triggermode(void *cookie, u_int pin,
enum intr_trigger trigger);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
int ioapic_set_smi(void *cookie, u_int pin);
void lapic_create(u_int apic_id, int boot_cpu);
void lapic_disable(void);
Adjust the handling of the local APIC PMC interrupt vector: - Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc() routines in the local APIC code that the hwpmc(4) driver can use to manage the local APIC PMC interrupt vector. - Do not enable the local APIC PMC interrupt vector by default when HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly enables the interrupt when it is succesfully initialized and disables the interrupt when it is unloaded. This avoids enabling the interrupt on unsupported CPUs which may result in spurious NMIs. Reported by: rnoland Reviewed by: jkoshy Approved by: re (kib) MFC after: 2 weeks
2009-08-14 21:05:08 +00:00
void lapic_disable_pmc(void);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
void lapic_dump(const char *str);
Add support for corrected machine check interrupts. CMCI is a new local APIC interrupt that fires when a threshold of corrected machine check events is reached. CMCI also includes a count of events when reporting corrected errors in the bank's status register. Note that individual banks may or may not support CMCI. If they do, each bank includes its own threshold register that determines when the interrupt fires. Currently the code uses a very simple strategy where it doubles the threshold on each interrupt until it succeeds in throttling the interrupt to occur only once a minute (this interval can be tuned via sysctl). The threshold is also adjusted on each hourly poll which will lower the threshold once events stop occurring. Tested by: Sailaja Bangaru sbappana at yahoo com MFC after: 1 month
2010-05-24 15:45:05 +00:00
void lapic_enable_cmc(void);
Adjust the handling of the local APIC PMC interrupt vector: - Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc() routines in the local APIC code that the hwpmc(4) driver can use to manage the local APIC PMC interrupt vector. - Do not enable the local APIC PMC interrupt vector by default when HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly enables the interrupt when it is succesfully initialized and disables the interrupt when it is unloaded. This avoids enabling the interrupt on unsupported CPUs which may result in spurious NMIs. Reported by: rnoland Reviewed by: jkoshy Approved by: re (kib) MFC after: 2 weeks
2009-08-14 21:05:08 +00:00
int lapic_enable_pmc(void);
- Move manipulation of td_intr_nesting_level out of assembly interrupt vector stubs and into the C functions they call. - Move disabling and EOIing of interrupt sources out of PIC driver entry points and into intr_execute_handlers(). Intr_execute_handlers() only disables a source for an interrupt if it is a stray interrupt or has threaded handlers. Sources with fast handlers no longer disable (mask) the source while executing the handlers. - Move the setting of clkintr_pending into intr_execute_handlers() and set the variable for any interrupt source with a vector of 0. (Should only be true for IRQ 0.) This fixes clkintr_pending in the NO_MIXED_MODE case. - Implement lapic_eoi() and use it to implement ioapic_eoi_source(). - Rename atpic_sched_ithd() to atpic_handle_intr() since it is used to handle all atpic interrupts and not just threaded ones. Inspired by: peter's changes to amd64 in p4 (1) Requested by: bde (2)
2003-11-12 18:13:57 +00:00
void lapic_eoi(void);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
int lapic_id(void);
Use vm_paddr_t rather than uintptr_t when passing the physical address of APICs to lapic_init() and ioapic_create().
2007-03-05 20:35:17 +00:00
void lapic_init(vm_paddr_t addr);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
int lapic_intr_pending(u_int vector);
void lapic_ipi_raw(register_t icrlo, u_int dest);
void lapic_ipi_vectored(u_int vector, int dest);
int lapic_ipi_wait(int delay);
Add support for corrected machine check interrupts. CMCI is a new local APIC interrupt that fires when a threshold of corrected machine check events is reached. CMCI also includes a count of events when reporting corrected errors in the bank's status register. Note that individual banks may or may not support CMCI. If they do, each bank includes its own threshold register that determines when the interrupt fires. Currently the code uses a very simple strategy where it doubles the threshold on each interrupt until it succeeds in throttling the interrupt to occur only once a minute (this interval can be tuned via sysctl). The threshold is also adjusted on each hourly poll which will lower the threshold once events stop occurring. Tested by: Sailaja Bangaru sbappana at yahoo com MFC after: 1 month
2010-05-24 15:45:05 +00:00
void lapic_handle_cmc(void);
Add a handler for the local APIC error interrupt. For now it just prints out the current value of the local APIC error register when the interrupt fires. MFC after: 1 week
2010-03-29 19:13:34 +00:00
void lapic_handle_error(void);
Evidently FreeBSD has long relied on the compiler to treat structures passed by value (trap frames) as if they were in fact being passed by reference. For better or worse, this incorrect behaviour is no longer present in gcc 4.1. In this patch I convert all trapframe arguments to be explicitly pass by reference. I also remove vm86_initflags, pushing the very little work that it actually does up into vm86_prepcall. Reviewed by: kan Tested by: kan
2006-12-17 05:07:01 +00:00
void lapic_handle_intr(int vector, struct trapframe *frame);
void lapic_handle_timer(struct trapframe *frame);
Adjust the handling of the local APIC PMC interrupt vector: - Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc() routines in the local APIC code that the hwpmc(4) driver can use to manage the local APIC PMC interrupt vector. - Do not enable the local APIC PMC interrupt vector by default when HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly enables the interrupt when it is succesfully initialized and disables the interrupt when it is unloaded. This avoids enabling the interrupt on unsupported CPUs which may result in spurious NMIs. Reported by: rnoland Reviewed by: jkoshy Approved by: re (kib) MFC after: 2 weeks
2009-08-14 21:05:08 +00:00
void lapic_reenable_pmc(void);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
void lapic_set_logical_id(u_int apic_id, u_int cluster, u_int cluster_id);
int lapic_set_lvt_mask(u_int apic_id, u_int lvt, u_char masked);
int lapic_set_lvt_mode(u_int apic_id, u_int lvt, u_int32_t mode);
- Change the APIC code to mostly use the recently added intr_trigger and intr_polarity enums for passing around interrupt trigger modes and polarity rather than using the magic numbers 0 for level/low and 1 for edge/high. - Convert the mptable parsing code to use the new ELCR wrapper code rather than reading the ELCR directly. Also, use the ELCR settings to control both the trigger and polarity of EISA IRQs instead of just the trigger mode. - Rework the MADT's handling of the ACPI SCI again: - If no override entry for the SCI exists at all, use level/low trigger instead of the default edge/high used for ISA IRQs. - For the ACPI SCI, use level/low values for conforming trigger and polarity rather than the edge/high values we use for all other ISA IRQs. - Rework the tunables available to override the MADT. The hw.acpi.force_sci_lo tunable is no longer supported. Instead, there are now two tunables that can independently override the trigger mode and/or polarity of the SCI. The hw.acpi.sci.trigger tunable can be set to either "edge" or "level", and the hw.acpi.sci.polarity tunable can be set to either "high" or "low". To simulate hw.acpi.force_sci_lo, set hw.acpi.sci.trigger to "level" and hw.acpi.sci.polarity to "low". If you are having problems with ACPI either causing an interrupt storm or not working at all (e.g., the power button doesn't turn invoke a shutdown -p now), you can try tweaking these two tunables to find the combination that works.
2004-05-04 20:39:24 +00:00
int lapic_set_lvt_polarity(u_int apic_id, u_int lvt,
enum intr_polarity pol);
int lapic_set_lvt_triggermode(u_int apic_id, u_int lvt,
enum intr_trigger trigger);
- Add a function to set the Task Priority Register (TPR) of the local APIC. Currently this is only used to initiailize the TPR to 0 during initial setup. - Reallocate vectors for the local APIC timer, error, and thermal LVT entries. The timer entry is allocated from the top of the I/O interrupt range reducing the number of vectors available for hardware interrupts to 191. Linux happens to use the same exact vector for its timer interrupt as well. If the timer vector shared the same priority queue as the IPI handlers, then the frequency that the timer vector will eventually be firing at can interact badly with the IPIs resulting in the queue filling and the dreaded IPI stuck panics, hence it being located at the top of the previous priority queue instead. - Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00
void lapic_set_tpr(u_int vector);
Change the x86 interrupt code to suspend/resume interrupt controllers (PICs) rather than interrupt sources. This allows interrupt controllers with no interrupt pics (such as the 8259As when APIC is in use) to participate in suspend/resume. - Always register the 8259A PICs even if we don't use any of their pins. - Explicitly reset the 8259As on resume on amd64 if 'device atpic' isn't included. - Add a "dummy" PIC for the local APIC on the BSP to reset the local APIC on resume. This gets suspend/resume working with APIC on UP systems. SMP still needs more work to bring the APs back to life. The MFC after is tentative. Tested by: anholt (i386) Submitted by: Andrea Bittau <a.bittau at cs.ucl.ac.uk> (3) MFC after: 1 week
2006-10-10 23:23:12 +00:00
void lapic_setup(int boot);
New APIC support code: - The apic interrupt entry points have been rewritten so that each entry point can serve 32 different vectors. When the entry is executed, it uses one of the 32-bit ISR registers to determine which vector in its assigned range was triggered. Thus, the apic code can support 159 different interrupt vectors with only 5 entry points. - We now always to disable the local APIC to work around an errata in certain PPros and then re-enable it again if we decide to use the APICs to route interrupts. - We no longer map IO APICs or local APICs using special page table entries. Instead, we just use pmap_mapdev(). We also no longer export the virtual address of the local APIC as a global symbol to the rest of the system, but only in local_apic.c. To aid this, the APIC ID of each CPU is exported as a per-CPU variable. - Interrupt sources are provided for each intpin on each IO APIC. Currently, each source is given a unique interrupt vector meaning that PCI interrupts are not shared on most machines with an I/O APIC. That mapping for interrupt sources to interrupt vectors is up to the APIC enumerator driver however. - We no longer probe to see if we need to use mixed mode to route IRQ 0, instead we always use mixed mode to route IRQ 0 for now. This can be disabled via the 'NO_MIXED_MODE' kernel option. - The npx(4) driver now always probes to see if a built-in FPU is present since this test can now be performed with the new APIC code. However, an SMP kernel will panic if there is more than one CPU and a built-in FPU is not found. - PCI interrupts are now properly routed when using APICs to route interrupts, so remove the hack to psuedo-route interrupts when the intpin register was read. - The apic.h header was moved to apicreg.h and a new apicvar.h header that declares the APIs used by the new APIC code was added.
2003-11-03 21:53:38 +00:00
#endif /* !LOCORE */
#endif /* _MACHINE_APICVAR_H_ */
Reference in New Issue Copy Permalink