freebsd-skq/sys/dev/hea/eni_transmit.c

824 lines
19 KiB
C
Raw Normal View History

/*
*
* ===================================
* HARP | Host ATM Research Platform
* ===================================
*
*
* This Host ATM Research Platform ("HARP") file (the "Software") is
* made available by Network Computing Services, Inc. ("NetworkCS")
* "AS IS". NetworkCS does not provide maintenance, improvements or
* support of any kind.
*
* NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED,
* INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE
* SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE.
* In no event shall NetworkCS be responsible for any damages, including
* but not limited to consequential damages, arising from or relating to
* any use of the Software or related support.
*
* Copyright 1994-1998 Network Computing Services, Inc.
*
* Copies of this Software may be made, however, the above copyright
* notice must be reproduced on all copies.
*
1999-08-28 01:08:13 +00:00
* @(#) $FreeBSD$
*
*/
/*
* Efficient ENI Adapter Support
* -----------------------------
*
* Transmit queue management and PDU output processing
*
*/
#include <netatm/kern_include.h>
#include <dev/hea/eni_stats.h>
#include <dev/hea/eni.h>
#include <dev/hea/eni_var.h>
#ifndef lint
1999-08-28 01:08:13 +00:00
__RCSID("@(#) $FreeBSD$");
#endif
/*
* Make a variable which controls printing of PDUs
* as they travel through the driver.
*/
#ifdef DIAGNOSTIC
int eni_pdu_print = 0;
#endif
/*
* Some PCI chipsets do not handle one or more of the 8WORD or
* 4WORD DMA transfer sizes. Default to using only 1WORD transfer
* sizes unless the user wishes to experiment.
*
* Make sure that these have to be changed here in this module.
*/
#define DMA_USE_8WORD
#define DMA_USE_4WORD
/*
* Create a DMA list entry
*
* DMA entries consist of a control word and a physical address.
* Control words are comprised of a DMA type, a count of type transfers
* to occur, and a variable which for TX requests is the TX channel
* number and for RX requests is the VCC number.
*
* Arguments:
* eup pointer to unit structure
* rx set if receiving
* dma_list pointer to DMA list structure
* list_size length of DMA list structure
* idx pointer to current list entry
* val TX channel or RX vcc
* addr virtual DMA address of data buffer
* size size in bytes of DMA request to be built
*
* Returns:
* dma_list updated with new entries
* idx points to next list entry
* -1 no room in DMA list structure or DMA_GET_ADDR failed
*/
int
eni_set_dma ( eup, rx, dma_list, list_size, idx, val, addr, size )
Eni_unit *eup;
u_long *dma_list;
int list_size;
long *idx;
int val;
u_long addr;
int size;
{
int dsize; /* Size of current DMA request */
/*
* Round up to multiple of word and convert to number
* of words rather then number of bytes.
*/
size = ( size + 3 ) >> 2;
#ifdef DMA_USE_8WORD
/*
* Check for room in DMA list - we need two entires
*/
if ( *idx + 2 >= list_size )
return ( -1 );
/*
* Here is the big win. Move as much data possible with
* n 8WORD DMAs.
*/
/*
* Check if we can do one or more 8WORD DMAs
*/
dsize = size & ~7;
if ( dsize ) {
dma_list[(*idx)++] = ( dsize >> 3 ) << DMA_COUNT_SHIFT |
val << DMA_VCC_SHIFT | DMA_8WORD;
dma_list[*idx] = (u_long)DMA_GET_ADDR ( addr, dsize, 0, 0 );
1999-12-21 08:24:35 +00:00
if ( dma_list[*idx] == 0 ) {
if ( rx )
eup->eu_stats.eni_st_drv.drv_rv_segdma++;
else
eup->eu_stats.eni_st_drv.drv_xm_segdma++;
return ( -1 ); /* DMA_GET_ADDR failed */
} else
(*idx)++; /* increment index */
/*
* Adjust addr and size
*/
addr += dsize << 2;
size &= 7;
}
#endif /* DMA_USE_8WORD */
#ifdef DMA_USE_4WORD
/*
* Check for room in DMA list - we need two entries
*/
if ( *idx + 2 >= list_size )
return ( -1 );
/*
* Kindof a tossup from this point on. Since we hacked as many
* 8WORD DMAs off as possible, we are left with 0-7 words
* of remaining data. We could do upto one 4WORD with 0-3
* words left, or upto three 2WORDS with 0-1 words left,
* or upto seven WORDS with nothing left. Someday we should
* experiment with performance and see if any particular
* combination is a better win then some other...
*/
/*
* Check if we can do one or more 4WORD DMAs
*/
dsize = size & ~3;
if ( dsize ) {
dma_list[(*idx)++] = ( dsize >> 2 ) << DMA_COUNT_SHIFT |
val << DMA_VCC_SHIFT | DMA_4WORD;
dma_list[*idx] = (u_long)DMA_GET_ADDR ( addr, dsize, 0, 0 );
1999-12-21 08:24:35 +00:00
if ( dma_list[*idx] == 0 ) {
if ( rx )
eup->eu_stats.eni_st_drv.drv_rv_segdma++;
else
eup->eu_stats.eni_st_drv.drv_xm_segdma++;
return ( -1 ); /* DMA_GET_ADDR failed */
} else
(*idx)++; /* increment index */
/*
* Adjust addr and size
*/
addr += dsize << 2;
size &= 3;
}
#endif /* DMA_USE_4WORD */
/*
* Check for room in DMA list - we need two entries
*/
if ( *idx + 2 >= list_size )
return ( -1 );
/*
* Hard to know if one 2WORD and 0/1 WORD DMA would be better
* then 2/3 WORD DMAs. For now, skip 2WORD DMAs in favor of
* WORD DMAs.
*/
/*
* Finish remaining size a 1WORD DMAs
*/
if ( size ) {
dma_list[(*idx)++] = ( size ) << DMA_COUNT_SHIFT |
val << DMA_VCC_SHIFT | DMA_WORD;
dma_list[*idx] = (u_long)DMA_GET_ADDR ( addr, size, 0, 0 );
1999-12-21 08:24:35 +00:00
if ( dma_list[*idx] == 0 ) {
if ( rx )
eup->eu_stats.eni_st_drv.drv_rv_segdma++;
else
eup->eu_stats.eni_st_drv.drv_xm_segdma++;
return ( -1 ); /* DMA_GET_ADDR failed */
} else
(*idx)++; /* increment index */
}
/*
* Inserted descriptor okay
*/
return 0;
}
/*
* Drain Transmit queue
*
* As PDUs are given to the adapter to be transmitted, we
* place them into a private ifqueue so that we can free
* any resources AFTER we know they've been successfully DMAed.
* As part of the output processing, we record the PDUs start
* and stop entries in the DMA list, and prevent wrapping. When
* we pull the top element off, we simply check that the current
* DMA location is outside this PDU and if so, it's okay to free
* things.
*
* PDUs are always in ascending order in the queue.
*
* Arguments:
* eup pointer to device unit structure
*
* Returns:
* none
*
*/
void
eni_xmit_drain ( eup )
Eni_unit *eup;
{
KBuffer *m;
Eni_vcc *evp;
struct vccb *vcp;
u_long pdulen;
u_long start, stop;
u_long dmap;
int s = splimp();
/*
* Pull the top element (PDU) off
*/
IF_DEQUEUE ( &eup->eu_txqueue, m );
/*
* As long as there are valid elements
*/
while ( m ) {
u_long *up;
/*
* Find start of buffer
*/
KB_DATASTART ( m, up, u_long * );
/*
* First word is the VCC for this PDU
*/
/*
* NOTE: There is a potential problem here in that
* if the VCC is closed after this buffer was transmitted
* but before we get here, that while evp is non-null,
* it will not reference a valid vccb. We need to either
* delay closing the VCC until all references are removed
* from the drain stacks, actually go through the drain
* stacks and remove any references, or find someway of
* indicating that this vccb is nolonger usable.
*/
evp = (Eni_vcc *)*up++;
/*
* Second word is the start and stop DMA pointers
*/
start = *up >> 16;
stop = *up++ & 0xffff;
/*
* Find out where the TX engine is at
*/
dmap = eup->eu_midway[MIDWAY_TX_RD];
/*
* Check to see if TX engine has processed this
* PDU yet. Remember that everything is circular
* and that stop might be less than start numerically.
*/
if ( start > stop ) {
if ( !(dmap >= stop && dmap < start) ) {
/*
* Haven't finished this PDU yet - replace
* it as the head of list.
*/
IF_PREPEND ( &eup->eu_txqueue, m );
/*
* If this one isn't done, none of the others
* are either.
*/
(void) splx(s);
return;
}
} else {
if ( dmap < stop && dmap >= start ) {
/*
* Haven't finished this PDU yet - replace
* it as the head of list.
*/
IF_PREPEND ( &eup->eu_txqueue, m );
/*
* If this one isn't done, none of the others
* are either.
*/
(void) splx(s);
return;
}
}
/*
* Count the PDU stats for this interface
*/
eup->eu_pif.pif_opdus++;
/*
* Third word is PDU length from eni_output().
*/
pdulen = *up++;
eup->eu_txfirst = (eup->eu_txfirst + *up) &
(eup->eu_txsize - 1);
eup->eu_pif.pif_obytes += pdulen;
/*
* Now lookup the VCC entry and counts the stats for
* this VC.
*/
if ( evp ) {
vcp = evp->ev_connvc->cvc_vcc;
if ( vcp ) {
vcp->vc_opdus++;
vcp->vc_obytes += pdulen;
/*
* If we also have a network interface, count the PDU
* there also.
*/
if ( vcp->vc_nif ) {
vcp->vc_nif->nif_obytes += pdulen;
vcp->vc_nif->nif_if.if_opackets++;
#if (defined(BSD) && (BSD >= 199103))
vcp->vc_nif->nif_if.if_obytes += pdulen;
#endif
}
}
}
/*
* Free the buffer chain
*/
KB_FREEALL ( m );
/*
* Advance DMA write okay pointer
*/
eup->eu_txdmawr = stop;
/*
* Look for next completed transmit PDU
*/
IF_DEQUEUE ( &eup->eu_txqueue, m );
}
/*
* We've drained the queue...
*/
(void) splx(s);
return;
}
/*
* Output a PDU
*
* This function is called via the common driver code after receiving a
* stack *_DATA* command. The common code has already validated most of
* the request so we just need to check a few more ENI-specific details.
* Then we just build a segmentation structure for the PDU and place the
* address into the DMA_Transmit_queue.
*
* Arguments:
* cup pointer to device common unit
* cvp pointer to common VCC entry
* m pointer to output PDU buffer chain head
*
* Returns:
* none
*
*/
void
eni_output ( cup, cvp, m )
Cmn_unit *cup;
Cmn_vcc *cvp;
KBuffer *m;
{
Eni_unit *eup = (Eni_unit *)cup;
Eni_vcc *evp = (Eni_vcc *)cvp;
int s, s2;
int pdulen = 0;
u_long size;
u_long buf_avail;
u_long dma_rd, dma_wr;
u_long dma[TEMP_DMA_SIZE];
int aal5, i;
long j;
u_long dma_avail;
u_long dma_start;
Eni_mem tx_send;
u_long *up;
KBuffer *m0 = m, *m1, *mprev = NULL;
caddr_t cp, bfr;
u_int len, align;
int compressed = 0;
#ifdef DIAGNOSTIC
if ( eni_pdu_print )
atm_dev_pdu_print ( cup, cvp, m, "eni output" );
#endif
/*
* Re-entry point for after buffer compression (if needed)
*/
retry:
/*
* We can avoid traversing the buffer list twice by building
* the middle (minus header and trailer) dma list at the
* same time we massage address and size alignments. Since
* this list remains local until we determine we've enough
* room, we're not going to trash anything by not checking
* sizes, etc. yet. Skip first entry to be used later to skip
* descriptor word.
*/
j = 2;
/*
* Do data positioning for address and length alignment
*/
while ( m ) {
u_long buf_addr; /* For passing addr to eni_set_dma() */
/*
* Get rid of any zero length buffers
*/
if ( KB_LEN ( m ) == 0 ) {
if ( mprev ) {
KB_UNLINK ( m, mprev, m1 );
} else {
KB_UNLINKHEAD ( m, m1 );
m0 = m1;
}
m = m1;
continue;
}
/*
* Get start of data onto full-word alignment
*/
KB_DATASTART ( m, cp, caddr_t );
if ((align = ((u_int)cp) & (sizeof(u_long)-1)) != 0) {
/*
* Gotta slide the data up
*/
eup->eu_stats.eni_st_drv.drv_xm_segnoal++;
bfr = cp - align;
KM_COPY ( cp, bfr, KB_LEN ( m ) );
KB_HEADMOVE ( m, -align );
} else {
/*
* Data already aligned
*/
bfr = cp;
}
/*
* Now work on getting the data length correct
*/
len = KB_LEN ( m );
while ( ( align = ( len & (sizeof(u_long)-1))) &&
(m1 = KB_NEXT ( m ) ) ) {
/*
* Have to move some data from following buffer(s)
* to word-fill this buffer
*/
u_int ncopy = MIN ( sizeof(u_long) - align,
KB_LEN ( m1 ) );
if ( ncopy ) {
/*
* Move data to current buffer
*/
caddr_t dest;
eup->eu_stats.eni_st_drv.drv_xm_seglen++;
KB_DATASTART ( m1, cp, caddr_t );
dest = bfr + len;
KB_HEADADJ ( m1, -ncopy );
KB_TAILADJ ( m, ncopy );
len += ncopy;
while ( ncopy-- ) {
*dest++ = *cp++;
}
}
/*
* If we've drained the buffer, free it
*/
if ( KB_LEN ( m1 ) == 0 ) {
KBuffer *m2;
KB_UNLINK ( m1, m, m2 );
}
}
/*
* Address and size are now aligned. Build dma list
* using TX channel 0. Also, round length up to a word
* size which should only effect the last buffer in the
* chain. This works because the PDU length is maintained
* seperately and we're not really adjusting the buffer's
* idea of its length.
*/
KB_DATASTART ( m, buf_addr, u_long );
if ( eni_set_dma ( eup, 0, dma, TEMP_DMA_SIZE, &j, 0,
buf_addr, KB_LEN ( m ) ) < 0 ) {
/*
* Failed to build DMA list. First, we'll try to
* compress the buffer chain into a smaller number
* of buffers. After compressing, we'll try to send
* the new buffer chain. If we still fail, then
* we'll drop the pdu.
*/
if ( compressed ) {
#ifdef DO_LOG
log ( LOG_ERR,
"eni_output: eni_set_dma failed\n" );
#endif
eup->eu_pif.pif_oerrors++;
KB_FREEALL ( m0 );
return;
}
eup->eu_stats.eni_st_drv.drv_xm_maxpdu++;
m = atm_dev_compress ( m0 );
if ( m == NULL ) {
#ifdef DO_LOG
log ( LOG_ERR,
"eni_output: atm_dev_compress() failed\n" );
#endif
eup->eu_pif.pif_oerrors++;
return;
}
/*
* Reset to new head of buffer chain
*/
m0 = m;
/*
* Indicate we've been through here
*/
compressed = 1;
/*
* Retry to build the DMA descriptors for the newly
* compressed buffer chain
*/
goto retry;
}
/*
* Now count the length
*/
pdulen += KB_LEN ( m );
/*
* Bump counters and get ready for next buffer
*/
mprev = m;
m = KB_NEXT ( m );
}
/*
* Get a buffer to use in a private queue so that we can
* reclaim resources after the DMA has finished.
*/
KB_ALLOC ( m, ENI_SMALL_BSIZE, KB_F_NOWAIT, KB_T_DATA );
if ( m ) {
/*
* Link the PDU onto our new head
*/
KB_NEXT ( m ) = m0;
} else {
/*
* Drop this PDU and let the sender try again.
*/
eup->eu_stats.eni_st_drv.drv_xm_norsc++;
#ifdef DO_LOG
log(LOG_ERR, "eni_output: Unable to allocate drain buffer.\n");
#endif
eup->eu_pif.pif_oerrors++;
KB_FREEALL ( m0 );
return;
}
s = splnet();
/*
* Calculate size of buffer necessary to store PDU. If this
* is an AAL5 PDU, we'll need to know where to stuff the length
* value in the trailer.
*/
/*
* AAL5 PDUs need an extra two words for control/length and
* CRC. Check for AAL5 and add requirements here.
*/
if ((aal5 = (evp->ev_connvc->cvc_attr.aal.type == ATM_AAL5)) != 0)
size = pdulen + 2 * sizeof(long);
else
size = pdulen;
/*
* Pad to next complete cell boundary
*/
size += (BYTES_PER_CELL - 1);
size -= size % BYTES_PER_CELL;
/*
* Convert size to words and add 2 words overhead for every
* PDU (descriptor and cell header).
*/
size = (size >> 2) + 2;
/*
* First, check to see if there's enough buffer space to
* store the PDU. We do this by checking to see if the size
* required crosses the eu_txfirst pointer. However, we don't
* want to exactly fill the buffer, because we won't be able to
* distinguish between a full and empty buffer.
*/
if ( eup->eu_txpos == eup->eu_txfirst )
buf_avail = eup->eu_txsize;
else
if ( eup->eu_txpos > eup->eu_txfirst )
buf_avail = eup->eu_txsize - ( eup->eu_txpos - eup->eu_txfirst );
else
buf_avail = eup->eu_txfirst - eup->eu_txpos;
if ( size >= buf_avail )
{
/*
* No buffer space in the adapter to store this PDU.
* Drop PDU and return.
*/
eup->eu_stats.eni_st_drv.drv_xm_nobuf++;
#ifdef DO_LOG
log ( LOG_ERR,
"eni_output: not enough room in buffer\n" );
#endif
eup->eu_pif.pif_oerrors++;
KB_FREEALL ( m );
(void) splx(s);
return;
}
/*
* Find out where current DMA pointers are at
*/
dma_start = dma_wr = eup->eu_midway[MIDWAY_TX_WR];
dma_rd = eup->eu_midway[MIDWAY_TX_RD];
/*
* Figure out how much DMA room we have available
*/
if ( dma_rd == dma_wr ) { /* Queue is empty */
dma_avail = DMA_LIST_SIZE;
} else {
dma_avail = ( dma_rd + DMA_LIST_SIZE - dma_wr )
& ( DMA_LIST_SIZE - 1 );
}
/*
* Check to see if we can describe this PDU or if we're:
* out of room, will wrap past recovered resources.
*/
if ( dma_avail < (j / 2 + 4) ||
( dma_wr + (j / 2 + 4) > eup->eu_txdmawr + DMA_LIST_SIZE ) ) {
/*
* No space to insert DMA list into queue. Drop this PDU.
*/
eup->eu_stats.eni_st_drv.drv_xm_nodma++;
#ifdef DO_LOG
log ( LOG_ERR,
"eni_output: not enough room in DMA queue\n" );
#endif
eup->eu_pif.pif_oerrors++;
KB_FREEALL( m );
(void) splx(s);
return;
}
/*
* Create DMA descriptor for header. There is a descriptor word
* and also a cell header word which we'll set manually.
*/
dma[0] = (((int)(eup->eu_txpos + 2) & (eup->eu_txsize-1)) <<
DMA_COUNT_SHIFT) | DMA_JK;
dma[1] = 0;
/*
* JK for AAL5 trailer. Set END bit as well.
*/
if ( aal5 ) {
dma[j++] = (((int)(eup->eu_txpos+size) & (eup->eu_txsize-1)) <<
DMA_COUNT_SHIFT) | DMA_END_BIT | DMA_JK;
dma[j++] = 0;
} else {
dma[j-2] |= DMA_END_BIT; /* Backup and set END bit */
}
/*
* Find out where in adapter memory this TX buffer starts.
*/
tx_send = (Eni_mem)
((((int)eup->eu_midway[MIDWAY_TXPLACE] & 0x7ff) << ENI_LOC_PREDIV) +
(int)eup->eu_ram);
/*
* Set descriptor word
*/
tx_send[eup->eu_txpos] =
(MIDWAY_UNQ_ID << 28) | (aal5 ? 1 << 27 : 0)
| (size / WORDS_PER_CELL);
/*
* Set cell header
*/
tx_send[(eup->eu_txpos+1)&(eup->eu_txsize-1)] =
evp->ev_connvc->cvc_vcc->vc_vci << 4;
/*
* We've got all our resources, count the stats
*/
if ( aal5 ) {
/*
* If this is an AAL5 PDU, we need to set the length
*/
tx_send[(eup->eu_txpos+size-2) &
(eup->eu_txsize-1)] = pdulen;
/*
* Increment AAL5 stats
*/
eup->eu_stats.eni_st_aal5.aal5_pdu_xmit++;
eup->eu_stats.eni_st_aal5.aal5_xmit += (size - 2) / WORDS_PER_CELL;
} else {
/*
* Increment AAL0 stats
*/
eup->eu_stats.eni_st_aal0.aal0_xmit += (size - 2) / WORDS_PER_CELL;
}
/*
* Increment ATM stats
*/
eup->eu_stats.eni_st_atm.atm_xmit += (size - 2) / WORDS_PER_CELL;
/*
* Store the DMA list
*/
j = j >> 1;
for ( i = 0; i < j; i++ ) {
eup->eu_txdma[dma_wr*2] = dma[i*2];
eup->eu_txdma[dma_wr*2+1] = dma[i*2+1];
dma_wr = (dma_wr+1) & (DMA_LIST_SIZE-1);
}
/*
* Build drain buffer
*
* We toss four words in to help keep track of this
* PDU. The first is a pointer to the VC control block
* so we can find which VCI this went out on, the second
* is the start and stop pointers for the DMA list which
* describes this PDU, the third is the PDU length
* since we'll want to know that for stats gathering,
* and the fourth is the number of DMA words.
*/
KB_DATASTART ( m, up, u_long * );
*up++ = (u_long)cvp;
*up++ = dma_start << 16 | dma_wr;
*up++ = pdulen;
*up = size;
/*
* Set length of our buffer
*/
KB_LEN ( m ) = 4 * sizeof ( long );
/*
* Place buffers onto transmit queue for draining
*/
s2 = splimp();
IF_ENQUEUE ( &eup->eu_txqueue, m );
(void) splx(s2);
/*
* Update next word to be stored
*/
eup->eu_txpos = ((eup->eu_txpos + size) & (eup->eu_txsize - 1));
/*
* Update MIDWAY_TX_WR pointer
*/
eup->eu_midway[MIDWAY_TX_WR] = dma_wr;
(void) splx ( s );
return;
}