freebsd-skq/sys/conf/dtb.mk

# $FreeBSD$
#
# The include file <dtb.mk> handles building and installing dtb files.
#
# +++ variables +++
#
# DTC		The Device Tree Compiler to use
#
# DTS		List of the dts files to build and install.
#
# DTSO		List of the dts overlay files to build and install.
#
# DTBDIR	Base path for dtb modules [/boot/dtb]
#
# DTBOWN	.dtb file owner. [${BINOWN}]
#
# DTBGRP	.dtb file group. [${BINGRP}]
#
# DTBMODE	Module file mode. [${BINMODE}]
#
# DESTDIR	The tree where the module gets installed. [not set]
#
# +++ targets +++
#
#	install:
#               install the kernel module; if the Makefile
#               does not itself define the target install, the targets
#               beforeinstall and afterinstall may also be used to cause
#               actions immediately before and after the install target
#		is executed.
#

.include "dtb.build.mk"

.if !target(install) && !target(realinstall)
all: ${DTB} ${DTBO}
realinstall: _dtbinstall
.ORDER: beforeinstall _dtbinstall

CLEANFILES+=${DTB} ${DTBO}
.endif # !target(install) && !target(realinstall)

.include <bsd.dep.mk>
.include <bsd.obj.mk>
.include <bsd.links.mk>
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00			`# $FreeBSD$`
			`#`
			`# The include file <dtb.mk> handles building and installing dtb files.`
			`#`
			`# +++ variables +++`
			`#`
make.conf: Add the possibility to use another DTC Add a make.conf DTC variable that control which DTC (Device Tree Compiler) to use. Reviewed by: bdrewery, imp Differential Revision: https://reviews.freebsd.org/D9577 2017-06-17 23:34:53 +00:00			`# DTC The Device Tree Compiler to use`
			`#`
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00			`# DTS List of the dts files to build and install.`
			`#`
Allow kernel config to specify DTS/DTSO to build, and out-of-tree support This allows for directives such as makeoptions DTS+=/out/of/tree/myboard.dts # in tree! Same rules applied as if this were in a dtb/ module makeoptions DTS+=otherboard.dts to be specified in config(5) and have these built/installed alongside th kernel. The assumption that overlays live in an overlays/ directory is only made for in-tree DTSO, but we still make the assumption that out-of-tree arm64 DTS will be in vendored directories (for now). This lowers the cost to hacking on an overlay or dts by being able to quickly throw it in a custom config, especially if it doesn't fit one of the current dtb/modules quite appropriately or it's not intended for commit there. The build/install targets were split out of dtb.mk to centralize the build logic and leave out the all/realinstall/CLEANFILES additions... it was believed that we didn't want to pollute the kernel build with these. The build rules were converted to suffix rules at the suggestion of Ian to clean things up a little bit in a world where we can have mixed in-tree/out-of-tree DTS/DTSO specified. Reviewed by: ian MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D19351 2019-03-26 02:45:23 +00:00			`# DTSO List of the dts overlay files to build and install.`
			`#`
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00			`# DTBDIR Base path for dtb modules [/boot/dtb]`
			`#`
			`# DTBOWN .dtb file owner. [${BINOWN}]`
			`#`
			`# DTBGRP .dtb file group. [${BINGRP}]`
			`#`
			`# DTBMODE Module file mode. [${BINMODE}]`
			`#`
			`# DESTDIR The tree where the module gets installed. [not set]`
			`#`
			`# +++ targets +++`
			`#`
Allow kernel config to specify DTS/DTSO to build, and out-of-tree support This allows for directives such as makeoptions DTS+=/out/of/tree/myboard.dts # in tree! Same rules applied as if this were in a dtb/ module makeoptions DTS+=otherboard.dts to be specified in config(5) and have these built/installed alongside th kernel. The assumption that overlays live in an overlays/ directory is only made for in-tree DTSO, but we still make the assumption that out-of-tree arm64 DTS will be in vendored directories (for now). This lowers the cost to hacking on an overlay or dts by being able to quickly throw it in a custom config, especially if it doesn't fit one of the current dtb/modules quite appropriately or it's not intended for commit there. The build/install targets were split out of dtb.mk to centralize the build logic and leave out the all/realinstall/CLEANFILES additions... it was believed that we didn't want to pollute the kernel build with these. The build rules were converted to suffix rules at the suggestion of Ian to clean things up a little bit in a world where we can have mixed in-tree/out-of-tree DTS/DTSO specified. Reviewed by: ian MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D19351 2019-03-26 02:45:23 +00:00			`# install:`
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00			`# install the kernel module; if the Makefile`
			`# does not itself define the target install, the targets`
			`# beforeinstall and afterinstall may also be used to cause`
			`# actions immediately before and after the install target`
			`# is executed.`
			`#`

Allow kernel config to specify DTS/DTSO to build, and out-of-tree support This allows for directives such as makeoptions DTS+=/out/of/tree/myboard.dts # in tree! Same rules applied as if this were in a dtb/ module makeoptions DTS+=otherboard.dts to be specified in config(5) and have these built/installed alongside th kernel. The assumption that overlays live in an overlays/ directory is only made for in-tree DTSO, but we still make the assumption that out-of-tree arm64 DTS will be in vendored directories (for now). This lowers the cost to hacking on an overlay or dts by being able to quickly throw it in a custom config, especially if it doesn't fit one of the current dtb/modules quite appropriately or it's not intended for commit there. The build/install targets were split out of dtb.mk to centralize the build logic and leave out the all/realinstall/CLEANFILES additions... it was believed that we didn't want to pollute the kernel build with these. The build rules were converted to suffix rules at the suggestion of Ian to clean things up a little bit in a world where we can have mixed in-tree/out-of-tree DTS/DTSO specified. Reviewed by: ian MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D19351 2019-03-26 02:45:23 +00:00			`.include "dtb.build.mk"`
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00
Allow kernel config to specify DTS/DTSO to build, and out-of-tree support This allows for directives such as makeoptions DTS+=/out/of/tree/myboard.dts # in tree! Same rules applied as if this were in a dtb/ module makeoptions DTS+=otherboard.dts to be specified in config(5) and have these built/installed alongside th kernel. The assumption that overlays live in an overlays/ directory is only made for in-tree DTSO, but we still make the assumption that out-of-tree arm64 DTS will be in vendored directories (for now). This lowers the cost to hacking on an overlay or dts by being able to quickly throw it in a custom config, especially if it doesn't fit one of the current dtb/modules quite appropriately or it's not intended for commit there. The build/install targets were split out of dtb.mk to centralize the build logic and leave out the all/realinstall/CLEANFILES additions... it was believed that we didn't want to pollute the kernel build with these. The build rules were converted to suffix rules at the suggestion of Ian to clean things up a little bit in a world where we can have mixed in-tree/out-of-tree DTS/DTSO specified. Reviewed by: ian MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D19351 2019-03-26 02:45:23 +00:00			`.if !target(install) && !target(realinstall)`
Add dtb overlays support DTB Overlays are useful to change/add nodes to a dtb without the need to modify it. Add support for building dtbo during buildkernel. The goal of DTBO present in the FreeBSD source tree is to fill a gap in time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months we can add a DTBO in tree in the meantime. This is not for adding DTBO for capes/hat/addon boards, those will be better to put in a ports. This is also not for enabling a i2c/spi/pwm controller on certain pins, each user have a different use case for those (which pins to use etc ...) and we cannot have all possible configuration. Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts. Reviewed by: kevans Differential Revision: https://reviews.freebsd.org/D14782 2018-03-24 21:30:24 +00:00			`all: ${DTB} ${DTBO}`
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00			`realinstall: _dtbinstall`
Allow kernel config to specify DTS/DTSO to build, and out-of-tree support This allows for directives such as makeoptions DTS+=/out/of/tree/myboard.dts # in tree! Same rules applied as if this were in a dtb/ module makeoptions DTS+=otherboard.dts to be specified in config(5) and have these built/installed alongside th kernel. The assumption that overlays live in an overlays/ directory is only made for in-tree DTSO, but we still make the assumption that out-of-tree arm64 DTS will be in vendored directories (for now). This lowers the cost to hacking on an overlay or dts by being able to quickly throw it in a custom config, especially if it doesn't fit one of the current dtb/modules quite appropriately or it's not intended for commit there. The build/install targets were split out of dtb.mk to centralize the build logic and leave out the all/realinstall/CLEANFILES additions... it was believed that we didn't want to pollute the kernel build with these. The build rules were converted to suffix rules at the suggestion of Ian to clean things up a little bit in a world where we can have mixed in-tree/out-of-tree DTS/DTSO specified. Reviewed by: ian MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D19351 2019-03-26 02:45:23 +00:00			`.ORDER: beforeinstall _dtbinstall`

			`CLEANFILES+=${DTB} ${DTBO}`
			`.endif # !target(install) && !target(realinstall)`
Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00
			`.include <bsd.dep.mk>`
			`.include <bsd.obj.mk>`
Honor LINKS=x y in dtb modules. We need this for compatibility links for old, FreeBSD names. 2017-01-28 05:07:53 +00:00			`.include <bsd.links.mk>`