freebsd-skq/sbin/quotacheck/quotacheck.c

696 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (c) 1980, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Robert Elz at The University of Melbourne.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char copyright[] =
"@(#) Copyright (c) 1980, 1990, 1993\n\
The Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#ifndef lint
static char sccsid[] = "@(#)quotacheck.c 8.3 (Berkeley) 1/29/94";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Fix up / report on disk quotas & usage
*/
#include <sys/param.h>
#include <sys/disklabel.h>
#include <sys/stat.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/quota.h>
#include <ufs/ffs/fs.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <fstab.h>
#include <grp.h>
#include <pwd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
char *qfname = QUOTAFILENAME;
char *qfextension[] = INITQFNAMES;
char *quotagroup = QUOTAGROUP;
union {
struct fs sblk;
char dummy[MAXBSIZE];
} sb_un;
#define sblock sb_un.sblk
union {
struct cg cgblk;
char dummy[MAXBSIZE];
} cg_un;
#define cgblk cg_un.cgblk
long dev_bsize = 1;
ino_t maxino;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode {
struct ufs1_dinode dp1;
struct ufs2_dinode dp2;
};
#define DIP(dp, field) \
((sblock.fs_magic == FS_UFS1_MAGIC) ? \
(dp)->dp1.field : (dp)->dp2.field)
struct quotaname {
long flags;
char grpqfname[MAXPATHLEN + 1];
char usrqfname[MAXPATHLEN + 1];
};
#define HASUSR 1
#define HASGRP 2
struct fileusage {
struct fileusage *fu_next;
u_long fu_curinodes;
u_long fu_curblocks;
u_long fu_id;
char fu_name[1];
/* actually bigger */
};
#define FUHASH 1024 /* must be power of two */
struct fileusage *fuhead[MAXQUOTAS][FUHASH];
int aflag; /* all file systems */
int gflag; /* check group quotas */
int uflag; /* check user quotas */
int vflag; /* verbose */
int fi; /* open disk file descriptor */
u_long highid[MAXQUOTAS]; /* highest addid()'ed identifier per type */
struct fileusage *
2002-03-21 13:20:49 +00:00
addid(u_long, int, char *);
char *blockcheck(char *);
void bread(ufs2_daddr_t, char *, long);
2002-03-21 13:20:49 +00:00
extern int checkfstab(int, int, void * (*)(struct fstab *),
int (*)(char *, char *, struct quotaname *));
int chkquota(char *, char *, struct quotaname *);
void freeinodebuf(void);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *
2002-03-21 13:20:49 +00:00
getnextinode(ino_t);
int getquotagid(void);
int hasquota(struct fstab *, int, char **);
struct fileusage *
2002-03-21 13:20:49 +00:00
lookup(u_long, int);
void *needchk(struct fstab *);
int oneof(char *, char*[], int);
void setinodebuf(ino_t);
2002-03-21 13:20:49 +00:00
int update(char *, char *, int);
void usage(void);
int
main(argc, argv)
int argc;
char *argv[];
{
struct fstab *fs;
struct passwd *pw;
struct group *gr;
struct quotaname *auxdata;
int i, argnum, maxrun, errs;
long done = 0;
char ch, *name;
errs = maxrun = 0;
while ((ch = getopt(argc, argv, "aguvl:")) != -1) {
switch(ch) {
case 'a':
aflag++;
break;
case 'g':
gflag++;
break;
case 'u':
uflag++;
break;
case 'v':
vflag++;
break;
case 'l':
maxrun = atoi(optarg);
break;
default:
usage();
}
}
argc -= optind;
argv += optind;
if ((argc == 0 && !aflag) || (argc > 0 && aflag))
usage();
if (!gflag && !uflag) {
gflag++;
uflag++;
}
if (gflag) {
setgrent();
while ((gr = getgrent()) != NULL)
(void) addid((u_long)gr->gr_gid, GRPQUOTA, gr->gr_name);
endgrent();
}
if (uflag) {
setpwent();
while ((pw = getpwent()) != NULL)
(void) addid((u_long)pw->pw_uid, USRQUOTA, pw->pw_name);
endpwent();
}
if (aflag)
exit(checkfstab(1, maxrun, needchk, chkquota));
if (setfsent() == 0)
errx(1, "%s: can't open", FSTAB);
while ((fs = getfsent()) != NULL) {
if (((argnum = oneof(fs->fs_file, argv, argc)) >= 0 ||
(argnum = oneof(fs->fs_spec, argv, argc)) >= 0) &&
(auxdata = needchk(fs)) &&
(name = blockcheck(fs->fs_spec))) {
done |= 1 << argnum;
errs += chkquota(name, fs->fs_file, auxdata);
}
}
endfsent();
for (i = 0; i < argc; i++)
if ((done & (1 << i)) == 0)
fprintf(stderr, "%s not found in %s\n",
argv[i], FSTAB);
exit(errs);
}
void
usage()
{
(void)fprintf(stderr, "%s\n%s\n",
"usage: quotacheck -a [-guv]",
" quotacheck [-guv] filesystem ...");
exit(1);
}
void *
needchk(fs)
struct fstab *fs;
{
struct quotaname *qnp;
char *qfnp;
if (strcmp(fs->fs_vfstype, "ufs") ||
strcmp(fs->fs_type, FSTAB_RW))
return (NULL);
if ((qnp = malloc(sizeof(*qnp))) == NULL)
errx(1, "malloc failed");
qnp->flags = 0;
if (gflag && hasquota(fs, GRPQUOTA, &qfnp)) {
strcpy(qnp->grpqfname, qfnp);
qnp->flags |= HASGRP;
}
if (uflag && hasquota(fs, USRQUOTA, &qfnp)) {
strcpy(qnp->usrqfname, qfnp);
qnp->flags |= HASUSR;
}
if (qnp->flags)
return (qnp);
free(qnp);
return (NULL);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* Possible superblock locations ordered from most to least likely.
*/
static int sblock_try[] = SBLOCKSEARCH;
/*
* Scan the specified file system to check quota(s) present on it.
*/
int
chkquota(fsname, mntpt, qnp)
char *fsname, *mntpt;
struct quotaname *qnp;
{
struct fileusage *fup;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
int cg, i, mode, errs = 0;
ino_t ino, inosused;
char *cp;
if ((fi = open(fsname, O_RDONLY, 0)) < 0) {
warn("%s", fsname);
return (1);
}
if (vflag) {
(void)printf("*** Checking ");
if (qnp->flags & HASUSR)
(void)printf("%s%s", qfextension[USRQUOTA],
(qnp->flags & HASGRP) ? " and " : "");
if (qnp->flags & HASGRP)
(void)printf("%s", qfextension[GRPQUOTA]);
(void)printf(" quotas for %s (%s)\n", fsname, mntpt);
}
sync();
dev_bsize = 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
for (i = 0; sblock_try[i] != -1; i++) {
bread(sblock_try[i], (char *)&sblock, (long)SBLOCKSIZE);
if ((sblock.fs_magic == FS_UFS1_MAGIC ||
(sblock.fs_magic == FS_UFS2_MAGIC &&
sblock.fs_sblockloc == sblock_try[i])) &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
sblock.fs_bsize <= MAXBSIZE &&
sblock.fs_bsize >= sizeof(struct fs))
break;
}
if (sblock_try[i] == -1) {
warn("Cannot find file system superblock");
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (1);
}
dev_bsize = sblock.fs_fsize / fsbtodb(&sblock, 1);
maxino = sblock.fs_ncg * sblock.fs_ipg;
for (cg = 0; cg < sblock.fs_ncg; cg++) {
ino = cg * sblock.fs_ipg;
setinodebuf(ino);
bread(fsbtodb(&sblock, cgtod(&sblock, cg)), (char *)(&cgblk),
sblock.fs_cgsize);
if (sblock.fs_magic == FS_UFS2_MAGIC)
inosused = cgblk.cg_initediblk;
else
inosused = sblock.fs_ipg;
/*
* If we are using soft updates, then we can trust the
* cylinder group inode allocation maps to tell us which
* inodes are allocated. We will scan the used inode map
* to find the inodes that are really in use, and then
* read only those inodes in from disk.
*/
if (sblock.fs_flags & FS_DOSOFTDEP) {
if (!cg_chkmagic(&cgblk))
errx(1, "CG %d: BAD MAGIC NUMBER\n", cg);
cp = &cg_inosused(&cgblk)[(inosused - 1) / CHAR_BIT];
for ( ; inosused > 0; inosused -= CHAR_BIT, cp--) {
if (*cp == 0)
continue;
for (i = 1 << (CHAR_BIT - 1); i > 0; i >>= 1) {
if (*cp & i)
break;
inosused--;
}
break;
}
if (inosused <= 0)
continue;
}
for (i = 0; i < inosused; i++, ino++) {
if ((dp = getnextinode(ino)) == NULL || ino < ROOTINO ||
(mode = DIP(dp, di_mode) & IFMT) == 0)
continue;
if (qnp->flags & HASGRP) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fup = addid((u_long)DIP(dp, di_gid), GRPQUOTA,
(char *)0);
fup->fu_curinodes++;
if (mode == IFREG || mode == IFDIR ||
mode == IFLNK)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fup->fu_curblocks += DIP(dp, di_blocks);
}
if (qnp->flags & HASUSR) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fup = addid((u_long)DIP(dp, di_uid), USRQUOTA,
(char *)0);
fup->fu_curinodes++;
if (mode == IFREG || mode == IFDIR ||
mode == IFLNK)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fup->fu_curblocks += DIP(dp, di_blocks);
}
}
}
freeinodebuf();
if (qnp->flags & HASUSR)
errs += update(mntpt, qnp->usrqfname, USRQUOTA);
if (qnp->flags & HASGRP)
errs += update(mntpt, qnp->grpqfname, GRPQUOTA);
close(fi);
return (errs);
}
/*
* Update a specified quota file.
*/
int
update(fsname, quotafile, type)
char *fsname, *quotafile;
int type;
{
struct fileusage *fup;
FILE *qfi, *qfo;
u_long id, lastid;
off_t offset;
struct dqblk dqbuf;
static int warned = 0;
static struct dqblk zerodqbuf;
static struct fileusage zerofileusage;
if ((qfo = fopen(quotafile, "r+")) == NULL) {
if (errno == ENOENT)
qfo = fopen(quotafile, "w+");
if (qfo) {
warnx("creating quota file %s", quotafile);
#define MODE (S_IRUSR|S_IWUSR|S_IRGRP)
(void) fchown(fileno(qfo), getuid(), getquotagid());
(void) fchmod(fileno(qfo), MODE);
} else {
warn("%s", quotafile);
return (1);
}
}
if ((qfi = fopen(quotafile, "r")) == NULL) {
warn("%s", quotafile);
(void) fclose(qfo);
return (1);
}
if (quotactl(fsname, QCMD(Q_SYNC, type), (u_long)0, (caddr_t)0) < 0 &&
errno == EOPNOTSUPP && !warned && vflag) {
warned++;
(void)printf("*** Warning: %s\n",
"Quotas are not compiled into this kernel");
}
for (lastid = highid[type], id = 0, offset = 0; id <= lastid;
id++, offset += sizeof(struct dqblk)) {
if (fread((char *)&dqbuf, sizeof(struct dqblk), 1, qfi) == 0)
dqbuf = zerodqbuf;
if ((fup = lookup(id, type)) == 0)
fup = &zerofileusage;
if (dqbuf.dqb_curinodes == fup->fu_curinodes &&
dqbuf.dqb_curblocks == fup->fu_curblocks) {
fup->fu_curinodes = 0;
fup->fu_curblocks = 0;
continue;
}
if (vflag) {
if (aflag)
printf("%s: ", fsname);
printf("%-8s fixed:", fup->fu_name);
if (dqbuf.dqb_curinodes != fup->fu_curinodes)
1998-06-28 20:11:23 +00:00
(void)printf("\tinodes %lu -> %lu",
(u_long)dqbuf.dqb_curinodes,
(u_long)fup->fu_curinodes);
if (dqbuf.dqb_curblocks != fup->fu_curblocks)
1998-06-28 20:11:23 +00:00
(void)printf("\tblocks %lu -> %lu",
(u_long)dqbuf.dqb_curblocks,
(u_long)fup->fu_curblocks);
(void)printf("\n");
}
/*
* Reset time limit if have a soft limit and were
* previously under it, but are now over it.
*/
if (dqbuf.dqb_bsoftlimit &&
dqbuf.dqb_curblocks < dqbuf.dqb_bsoftlimit &&
fup->fu_curblocks >= dqbuf.dqb_bsoftlimit)
dqbuf.dqb_btime = 0;
if (dqbuf.dqb_isoftlimit &&
dqbuf.dqb_curblocks < dqbuf.dqb_isoftlimit &&
fup->fu_curblocks >= dqbuf.dqb_isoftlimit)
dqbuf.dqb_itime = 0;
dqbuf.dqb_curinodes = fup->fu_curinodes;
dqbuf.dqb_curblocks = fup->fu_curblocks;
if (fseek(qfo, offset, SEEK_SET) < 0) {
warn("%s: seek failed", quotafile);
return(1);
}
fwrite((char *)&dqbuf, sizeof(struct dqblk), 1, qfo);
(void) quotactl(fsname, QCMD(Q_SETUSE, type), id,
(caddr_t)&dqbuf);
fup->fu_curinodes = 0;
fup->fu_curblocks = 0;
}
fclose(qfi);
fflush(qfo);
ftruncate(fileno(qfo),
(((off_t)highid[type] + 1) * sizeof(struct dqblk)));
fclose(qfo);
return (0);
}
/*
* Check to see if target appears in list of size cnt.
*/
int
oneof(target, list, cnt)
char *target, *list[];
int cnt;
{
int i;
for (i = 0; i < cnt; i++)
if (strcmp(target, list[i]) == 0)
return (i);
return (-1);
}
/*
* Determine the group identifier for quota files.
*/
int
getquotagid()
{
struct group *gr;
if ((gr = getgrnam(quotagroup)) != NULL)
return (gr->gr_gid);
return (-1);
}
/*
* Check to see if a particular quota is to be enabled.
*/
int
hasquota(fs, type, qfnamep)
struct fstab *fs;
int type;
char **qfnamep;
{
char *opt;
char *cp;
static char initname, usrname[100], grpname[100];
static char buf[BUFSIZ];
if (!initname) {
(void)snprintf(usrname, sizeof(usrname),
"%s%s", qfextension[USRQUOTA], qfname);
(void)snprintf(grpname, sizeof(grpname),
"%s%s", qfextension[GRPQUOTA], qfname);
initname = 1;
}
strcpy(buf, fs->fs_mntops);
for (opt = strtok(buf, ","); opt; opt = strtok(NULL, ",")) {
if ((cp = index(opt, '=')) != NULL)
*cp++ = '\0';
if (type == USRQUOTA && strcmp(opt, usrname) == 0)
break;
if (type == GRPQUOTA && strcmp(opt, grpname) == 0)
break;
}
if (!opt)
return (0);
if (cp)
*qfnamep = cp;
else {
(void)snprintf(buf, sizeof(buf),
"%s/%s.%s", fs->fs_file, qfname, qfextension[type]);
*qfnamep = buf;
}
return (1);
}
/*
* Routines to manage the file usage table.
*
* Lookup an id of a specific type.
*/
struct fileusage *
lookup(id, type)
u_long id;
int type;
{
struct fileusage *fup;
for (fup = fuhead[type][id & (FUHASH-1)]; fup != 0; fup = fup->fu_next)
if (fup->fu_id == id)
return (fup);
return (NULL);
}
/*
* Add a new file usage id if it does not already exist.
*/
struct fileusage *
addid(id, type, name)
u_long id;
int type;
char *name;
{
struct fileusage *fup, **fhp;
int len;
if ((fup = lookup(id, type)) != NULL)
return (fup);
if (name)
len = strlen(name);
else
len = 10;
if ((fup = calloc(1, sizeof(*fup) + len)) == NULL)
errx(1, "calloc failed");
fhp = &fuhead[type][id & (FUHASH - 1)];
fup->fu_next = *fhp;
*fhp = fup;
fup->fu_id = id;
if (id > highid[type])
highid[type] = id;
if (name)
bcopy(name, fup->fu_name, len + 1);
else {
(void)sprintf(fup->fu_name, "%lu", id);
if (vflag)
printf("unknown %cid: %lu\n",
type == USRQUOTA ? 'u' : 'g', id);
}
return (fup);
}
/*
* Special purpose version of ginode used to optimize pass
* over all the inodes in numerical order.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ino_t nextino, lastinum, lastvalidinum;
static long readcnt, readpercg, fullcnt, inobufsize, partialcnt, partialsize;
static caddr_t inodebuf;
#define INOBUFSIZE 56*1024 /* size of buffer to read inodes */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *
getnextinode(ino_t inumber)
{
long size;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t dblk;
union dinode *dp;
static caddr_t nextinop;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (inumber != nextino++ || inumber > lastvalidinum)
errx(1, "bad inode number %d to nextinode", inumber);
if (inumber >= lastinum) {
readcnt++;
dblk = fsbtodb(&sblock, ino_to_fsba(&sblock, lastinum));
if (readcnt % readpercg == 0) {
size = partialsize;
lastinum += partialcnt;
} else {
size = inobufsize;
lastinum += fullcnt;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* If bread returns an error, it will already have zeroed
* out the buffer, so we do not need to do so here.
*/
bread(dblk, inodebuf, size);
nextinop = inodebuf;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dp = (union dinode *)nextinop;
if (sblock.fs_magic == FS_UFS1_MAGIC)
nextinop += sizeof(struct ufs1_dinode);
else
nextinop += sizeof(struct ufs2_dinode);
return (dp);
}
/*
* Prepare to scan a set of inodes.
*/
void
setinodebuf(ino_t inum)
{
if (inum % sblock.fs_ipg != 0)
errx(1, "bad inode number %d to setinodebuf", inum);
lastvalidinum = inum + sblock.fs_ipg - 1;
nextino = inum;
lastinum = inum;
readcnt = 0;
if (inodebuf != NULL)
return;
inobufsize = blkroundup(&sblock, INOBUFSIZE);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fullcnt = inobufsize / ((sblock.fs_magic == FS_UFS1_MAGIC) ?
sizeof(struct ufs1_dinode) : sizeof(struct ufs2_dinode));
readpercg = sblock.fs_ipg / fullcnt;
partialcnt = sblock.fs_ipg % fullcnt;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
partialsize = partialcnt * ((sblock.fs_magic == FS_UFS1_MAGIC) ?
sizeof(struct ufs1_dinode) : sizeof(struct ufs2_dinode));
if (partialcnt != 0) {
readpercg++;
} else {
partialcnt = fullcnt;
partialsize = inobufsize;
}
if ((inodebuf = malloc((unsigned)inobufsize)) == NULL)
errx(1, "cannot allocate space for inode buffer");
}
/*
* Free up data structures used to scan inodes.
*/
void
freeinodebuf()
{
if (inodebuf != NULL)
free(inodebuf);
inodebuf = NULL;
}
/*
* Read specified disk blocks.
*/
void
bread(bno, buf, cnt)
ufs2_daddr_t bno;
char *buf;
long cnt;
{
if (lseek(fi, (off_t)bno * dev_bsize, SEEK_SET) < 0 ||
read(fi, buf, cnt) != cnt)
errx(1, "bread failed on block %ld", (long)bno);
}