d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1db5145a8d
freebsd-skq/sys/net/route.c

1843 lines
48 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1980, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Revision 1.67 changes correspond to CSRG revision 8.3.1.1 changes.
2002-12-25 10:50:08 +00:00
* @(#)route.c 8.3.1.1 (Berkeley) 2/23/95
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
/************************************************************************
* Note: In this file a 'fib' is a "forwarding information base" *
* Which is the new name for an in kernel routing (next hop) table. *
***********************************************************************/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Make INET a proper option. This will not make any of object files that LINT create change; there might be differences with INET disabled, but hardly anything compiled before without INET anyway. Now the 'obvious' things will give a proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The only thing that _should_ work (but can't be made to compile reasonably easily) is sppp :-( This commit move struct arpcom from <netinet/if_ether.h> to <net/if_arp.h>.
1998-01-08 23:42:31 +00:00
#include "opt_inet.h"
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
#include "opt_route.h"
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
#include "opt_mrouting.h"
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#include "opt_mpath.h"
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Added used #include - don't depend on <sys/mbuf.h> including <sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
#include <sys/malloc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/mbuf.h>
#include <sys/socket.h>
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
#include <sys/sysctl.h>
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
#include <sys/syslog.h>
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
#include <sys/sysproto.h>
#include <sys/proc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/domain.h>
Postpone route_init() until all domains are attached.
1999-04-29 03:22:19 +00:00
#include <sys/kernel.h>
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
#include <sys/vimage.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <net/if.h>
#include <net/route.h>
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
#include <net/radix_mpath.h>
#endif
Rather than using hidden includes (with cicular dependencies), directly include only the header files needed. This reduces the unneeded spamming of various headers into lots of files. For now, this leaves us with very few modules including vnet.h and thus needing to depend on opt_route.h. Reviewed by: brooks, gnn, des, zec, imp Sponsored by: The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
#include <net/vnet.h>
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <netinet/in.h>
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
#include <netinet/ip_mroute.h>
Rather than using hidden includes (with cicular dependencies), directly include only the header files needed. This reduces the unneeded spamming of various headers into lots of files. For now, this leaves us with very few modules including vnet.h and thus needing to depend on opt_route.h. Reviewed by: brooks, gnn, des, zec, imp Sponsored by: The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
#include <netinet/vinet.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
#include <vm/uma.h>
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
u_int rt_numfibs = RT_NUMFIBS;
SYSCTL_INT(_net, OID_AUTO, fibs, CTLFLAG_RD, &rt_numfibs, 0, "");
Add the ability to add new addresses for interfacesto just one FIB (Other more specific related options will follow) This allows one to set multiple p2p links to the same place and select which to use by having each in different FIBS.
2008-07-27 01:29:28 +00:00
/*
* Allow the boot code to allow LESS than RT_MAXFIBS to be used.
* We can't do more because storage is statically allocated for now.
* (for compatibility reasons.. this will change).
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
TUNABLE_INT("net.fibs", &rt_numfibs);
Add the ability to add new addresses for interfacesto just one FIB (Other more specific related options will follow) This allows one to set multiple p2p links to the same place and select which to use by having each in different FIBS.
2008-07-27 01:29:28 +00:00
/*
* By default add routes to all fibs for new interfaces.
* Once this is set to 0 then only allocate routes on interface
* changes for the FIB of the caller when adding a new set of addresses
* to an interface. XXX this is a shotgun aproach to a problem that needs
* a more fine grained solution.. that will come.
*/
u_int rt_add_addr_allfibs = 1;
SYSCTL_INT(_net, OID_AUTO, add_addr_allfibs, CTLFLAG_RW,
&rt_add_addr_allfibs, 0, "");
TUNABLE_INT("net.add_addr_allfibs", &rt_add_addr_allfibs);
Change the initialization methodology for global variables scheduled for virtualization. Instead of initializing the affected global variables at instatiation, assign initial values to them in initializer functions. As a rule, initialization at instatiation for such variables should never be introduced again from now on. Furthermore, enclose all instantiations of such global variables in #ifdef VIMAGE_GLOBALS blocks. Essentialy, this change should have zero functional impact. In the next phase of merging network stack virtualization infrastructure from p4/vimage branch, the new initialization methology will allow us to switch between using global variables and their counterparts residing in virtualization containers with minimum code churn, and in the long run allow us to intialize multiple instances of such container structures. Discussed at: devsummit Strassburg Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
#ifdef VIMAGE_GLOBALS
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static struct rtstat rtstat;
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
/* by default only the first 'row' of tables will be accessed. */
/*
* XXXMRT When we fix netstat, and do this differnetly,
* we can allocate this dynamically. As long as we are keeping
* things backwards compaitble we need to allocate this
* statically.
*/
struct radix_node_head *rt_tables[RT_MAXFIBS][AF_MAX+1];
Eliminate sloppy common-style declarations. There should be none left for the LINT configuation.
1995-07-29 11:44:31 +00:00
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static int rttrash; /* routes not in table but not freed */
Change the initialization methodology for global variables scheduled for virtualization. Instead of initializing the affected global variables at instatiation, assign initial values to them in initializer functions. As a rule, initialization at instatiation for such variables should never be introduced again from now on. Furthermore, enclose all instantiations of such global variables in #ifdef VIMAGE_GLOBALS blocks. Essentialy, this change should have zero functional impact. In the next phase of merging network stack virtualization infrastructure from p4/vimage branch, the new initialization methology will allow us to switch between using global variables and their counterparts residing in virtualization containers with minimum code churn, and in the long run allow us to intialize multiple instances of such container structures. Discussed at: devsummit Strassburg Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Remove __P.
2002-03-19 21:54:18 +00:00
static void rt_maskedcopy(struct sockaddr *,
struct sockaddr *, struct sockaddr *);
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
/* compare two sockaddr structures */
#define sa_equal(a1, a2) (bcmp((a1), (a2), (a1)->sa_len) == 0)
/*
* Convert a 'struct radix_node *' to a 'struct rtentry *'.
* The operation can be done safely (in this code) because a
* 'struct rtentry' starts with two 'struct radix_node''s, the first
* one representing leaf nodes in the routing tree, which is
* what the code in radix.c passes us as a 'struct radix_node'.
*
* But because there are a lot of assumptions in this conversion,
* do not cast explicitly, but always use the macro below.
*/
#define RNTORT(p) ((struct rtentry *)(p))
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
static uma_zone_t rtzone; /* Routing table UMA zone. */
#if 0
/* default fib for tunnels to use */
u_int tunnel_fib = 0;
SYSCTL_INT(_net, OID_AUTO, tunnelfib, CTLFLAG_RD, &tunnel_fib, 0, "");
#endif
/*
* handler for net.my_fibnum
*/
static int
sysctl_my_fibnum(SYSCTL_HANDLER_ARGS)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
int fibnum;
int error;
fibnum = curthread->td_proc->p_fibnum;
error = sysctl_handle_int(oidp, &fibnum, 0, req);
return (error);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
SYSCTL_PROC(_net, OID_AUTO, my_fibnum, CTLTYPE_INT|CTLFLAG_RD,
NULL, 0, &sysctl_my_fibnum, "I", "default FIB of caller");
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
make route_init() static
2004-04-17 15:10:20 +00:00
static void
route_init(void)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Merge more of currently non-functional (i.e. resolving to whitespace) macros from p4/vimage branch. Do a better job at enclosing all instantiations of globals scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks. De-virtualize and mark as const saorder_state_alive and saorder_state_any arrays from ipsec code, given that they are never updated at runtime, so virtualizing them would be pointless. Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
INIT_VNET_INET(curvnet);
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
int table;
struct domain *dom;
int fam;
move a #define from a place it shouldn't have been to a place it should have been. Basically my testign didn't ocver one case that this broke. thanks tinderbox!
2008-05-10 04:32:58 +00:00
/* whack the tunable ints into line. */
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
if (rt_numfibs > RT_MAXFIBS)
rt_numfibs = RT_MAXFIBS;
if (rt_numfibs == 0)
rt_numfibs = 1;
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
rtzone = uma_zcreate("rtentry", sizeof(struct rtentry), NULL, NULL,
NULL, NULL, UMA_ALIGN_PTR, 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
rn_init(); /* initialize all zeroes, all ones, mask table */
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
for (dom = domains; dom; dom = dom->dom_next) {
if (dom->dom_rtattach) {
for (table = 0; table < rt_numfibs; table++) {
if ( (fam = dom->dom_family) == AF_INET ||
table == 0) {
/* for now only AF_INET has > 1 table */
/* XXX MRT
* rtattach will be also called
* from vfs_export.c but the
* offset will be 0
* (only for AF_INET and AF_INET6
* which don't need it anyhow)
*/
dom->dom_rtattach(
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
(void **)&V_rt_tables[table][fam],
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
dom->dom_rtoffset);
} else {
break;
}
}
}
}
}
#ifndef _SYS_SYSPROTO_H_
struct setfib_args {
int fibnum;
};
#endif
int
setfib(struct thread *td, struct setfib_args *uap)
{
if (uap->fibnum < 0 || uap->fibnum >= rt_numfibs)
return EINVAL;
td->td_proc->p_fibnum = uap->fibnum;
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Packet routing routines.
*/
void
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtalloc(struct route *ro)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rtalloc_ign_fib(ro, 0UL, 0);
}
void
rtalloc_fib(struct route *ro, u_int fibnum)
{
rtalloc_ign_fib(ro, 0UL, fibnum);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Implemented rtalloc_ign().
1994-12-13 23:07:03 +00:00
void
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtalloc_ign(struct route *ro, u_long ignore)
Implemented rtalloc_ign().
1994-12-13 23:07:03 +00:00
{
Fix a route table leak in rtalloc() and rtalloc_ign(). It is possible for ro->ro_rt to be non-NULL even though the RTF_UP flag is cleared. (Example: a routing daemon or the "route" command deletes a cloned route in active use by a TCP connection.) In that case, the code was clobbering a reference to the routing table entry without decrementing the entry's reference count. The splnet() call probably isn't needed, but I haven't been able to prove that yet. It isn't significant from a performance standpoint since it is executed very rarely. Reviewed by: wollman and others in the freebsd-current mailing list
1999-12-09 17:09:37 +00:00
struct rtentry *rt;
if ((rt = ro->ro_rt) != NULL) {
if (rt->rt_ifp != NULL && rt->rt_flags & RTF_UP)
return;
RTFREE(rt);
Clear ro->ro_rt just after RTFREE(). Pleases let me make sure that no one touch the invalid ro_rt pointer, after splx(s) and before next ro_rt initialization. Though usually this seems to be already called at splnet, I still sometime experience kernel crash at rtfree() in my INET6 enabled environment where IPv6 connection is frequently used. (Off-course, it might be just due to another bug.)
2000-01-15 07:27:12 +00:00
ro->ro_rt = NULL;
Fix a route table leak in rtalloc() and rtalloc_ign(). It is possible for ro->ro_rt to be non-NULL even though the RTF_UP flag is cleared. (Example: a routing daemon or the "route" command deletes a cloned route in active use by a TCP connection.) In that case, the code was clobbering a reference to the routing table entry without decrementing the entry's reference count. The splnet() call probably isn't needed, but I haven't been able to prove that yet. It isn't significant from a performance standpoint since it is executed very rarely. Reviewed by: wollman and others in the freebsd-current mailing list
1999-12-09 17:09:37 +00:00
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
ro->ro_rt = rtalloc1_fib(&ro->ro_dst, 1, ignore, 0);
if (ro->ro_rt)
RT_UNLOCK(ro->ro_rt);
}
void
rtalloc_ign_fib(struct route *ro, u_long ignore, u_int fibnum)
{
struct rtentry *rt;
if ((rt = ro->ro_rt) != NULL) {
if (rt->rt_ifp != NULL && rt->rt_flags & RTF_UP)
return;
RTFREE(rt);
ro->ro_rt = NULL;
}
ro->ro_rt = rtalloc1_fib(&ro->ro_dst, 1, ignore, fibnum);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (ro->ro_rt)
RT_UNLOCK(ro->ro_rt);
Implemented rtalloc_ign().
1994-12-13 23:07:03 +00:00
}
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* Look up the route that matches the address given
* Or, at least try.. Create a cloned route if needed.
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
*
* The returned route, if any, is locked.
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct rtentry *
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtalloc1(struct sockaddr *dst, int report, u_long ignflags)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
return (rtalloc1_fib(dst, report, ignflags, 0));
}
struct rtentry *
rtalloc1_fib(struct sockaddr *dst, int report, u_long ignflags,
u_int fibnum)
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
struct radix_node_head *rnh;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
struct rtentry *rt;
struct radix_node *rn;
struct rtentry *newrt;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct rt_addrinfo info;
Add support for two separate cloning flags, one set by the lower layers, and one set by the protocol family. Also add another parameter to rtalloc1() to allow for any interface flags to be ignored; currently this is only useful for RTF_PRCLONING. Get rid of rt_prflags and re-unite with rt_flags. Add T/TCP ``route metrics''. NB: YOU MUST RECOMPILE `route' AND OTHER RELATED PROGRAMS AS A RESULT OF THIS CHANGE. This also adds a new interface parameter, `ifi_physical', which will eventually replace IFF_ALTPHYS as the mechanism for specifying the particular physical connection desired on a multiple-connection card. NB: YOU MUST RECOMPILE `ifconfig' AND OTHER RELATED PROGRAMS AS A RESULT OF THIS CHANGE.
1994-12-13 22:31:49 +00:00
u_long nflags;
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
int needresolve = 0, err = 0, msgtype = RTM_MISS;
int needlock;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
KASSERT((fibnum < rt_numfibs), ("rtalloc1_fib: bad fibnum"));
if (dst->sa_family != AF_INET) /* Only INET supports > 1 fib now */
fibnum = 0;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
rnh = V_rt_tables[fibnum][dst->sa_family];
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
newrt = NULL;
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
* Look up the address in the table for that Address Family
*/
SMP locking for radix nodes.
2002-12-24 03:03:39 +00:00
if (rnh == NULL) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_rtstat.rts_unreach++;
SMP locking for radix nodes.
2002-12-24 03:03:39 +00:00
goto miss2;
}
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
needlock = !(ignflags & RTF_RNH_LOCKED);
retry:
if (needlock)
RADIX_NODE_HEAD_RLOCK(rnh);
#ifdef INVARIANTS
else
RADIX_NODE_HEAD_LOCK_ASSERT(rnh);
#endif
rn = rnh->rnh_matchaddr(dst, rnh);
if (rn && ((rn->rn_flags & RNF_ROOT) == 0)) {
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
newrt = rt = RNTORT(rn);
Add support for two separate cloning flags, one set by the lower layers, and one set by the protocol family. Also add another parameter to rtalloc1() to allow for any interface flags to be ignored; currently this is only useful for RTF_PRCLONING. Get rid of rt_prflags and re-unite with rt_flags. Add T/TCP ``route metrics''. NB: YOU MUST RECOMPILE `route' AND OTHER RELATED PROGRAMS AS A RESULT OF THIS CHANGE. This also adds a new interface parameter, `ifi_physical', which will eventually replace IFF_ALTPHYS as the mechanism for specifying the particular physical connection desired on a multiple-connection card. NB: YOU MUST RECOMPILE `ifconfig' AND OTHER RELATED PROGRAMS AS A RESULT OF THIS CHANGE.
1994-12-13 22:31:49 +00:00
nflags = rt->rt_flags & ~ignflags;
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
if (report && (nflags & RTF_CLONING)) {
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (needlock && !RADIX_NODE_HEAD_LOCK_TRY_UPGRADE(rnh)) {
RADIX_NODE_HEAD_RUNLOCK(rnh);
RADIX_NODE_HEAD_LOCK(rnh);
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
* lookup again to make sure it wasn't changed
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
rn = rnh->rnh_matchaddr(dst, rnh);
if (!(rn && ((rn->rn_flags & RNF_ROOT) == 0))) {
RADIX_NODE_HEAD_UNLOCK(rnh);
needresolve = 0;
log(LOG_INFO, "retrying route lookup ...\n");
goto retry;
}
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
}
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
needresolve = 1;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
} else {
RT_LOCK(newrt);
replace explicit changes to rt_refcnt by RT_ADDREF and RT_REMREF macros that expand to include assertions when the system is built with INVARIANTS Supported by: FreeBSD Foundation
2003-11-08 23:36:32 +00:00
RT_ADDREF(newrt);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (needlock)
RADIX_NODE_HEAD_RUNLOCK(rnh);
goto done;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
}
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
}
/*
* if needresolve is set then we have the exclusive lock
* and we need to keep it held for the benefit of rtrequest_fib
*/
if (!needresolve && needlock)
RADIX_NODE_HEAD_RUNLOCK(rnh);
if (needresolve) {
RADIX_NODE_HEAD_WLOCK_ASSERT(rnh);
/*
* We are apparently adding (report = 0 in delete).
* If it requires that it be cloned, do so.
* (This implies it wasn't a HOST route.)
*/
err = rtrequest_fib(RTM_RESOLVE, dst, NULL,
NULL, RTF_RNH_LOCKED, &newrt, fibnum);
if (err) {
/*
* If the cloning didn't succeed, maybe
* what we have will do. Return that.
*/
newrt = rt; /* existing route */
RT_LOCK(newrt);
RT_ADDREF(newrt);
goto miss;
}
KASSERT(newrt, ("no route and no error"));
RT_LOCK(newrt);
if (newrt->rt_flags & RTF_XRESOLVE) {
/*
* If the new route specifies it be
* externally resolved, then go do that.
*/
msgtype = RTM_RESOLVE;
goto miss;
}
/* Inform listeners of the new route. */
bzero(&info, sizeof(info));
info.rti_info[RTAX_DST] = rt_key(newrt);
info.rti_info[RTAX_NETMASK] = rt_mask(newrt);
info.rti_info[RTAX_GATEWAY] = newrt->rt_gateway;
if (newrt->rt_ifp != NULL) {
info.rti_info[RTAX_IFP] =
newrt->rt_ifp->if_addr->ifa_addr;
info.rti_info[RTAX_IFA] = newrt->rt_ifa->ifa_addr;
}
rt_missmsg(RTM_ADD, &info, newrt->rt_flags, 0);
if (needlock)
RADIX_NODE_HEAD_UNLOCK(rnh);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else {
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* Either we hit the root or couldn't find any match,
* Which basically means
* "caint get there frm here"
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_rtstat.rts_unreach++;
SMP locking for radix nodes.
2002-12-24 03:03:39 +00:00
miss:
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (needlock && needresolve)
RADIX_NODE_HEAD_UNLOCK(rnh);
SMP locking for radix nodes.
2002-12-24 03:03:39 +00:00
miss2: if (report) {
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* If required, report the failure to the supervising
* Authorities.
* For a delete, this is not an error. (report == 0)
*/
Initialize a local variable in 2 places just before it is used, not always at the start of rtalloc1(). This backs out part of revs 1.83 and 1.85. Profiling on an i386 showed that that for sending tiny packets using bge, -current takes 7 bzero()s where RELENG_4 takes only 1, and that bzero()ing is now the dominant overhead (10-12%, up from 1%, but profiling overestimated this a bit). This commit backs out 2 of the 6 extra bzero()s (1 in each of 2 calls per packet to rtalloc1()). They were the largest ones by byte count (48 bytes each) but perhaps not by time (small misaligned ones might take longer).
2006-11-23 05:57:15 +00:00
bzero(&info, sizeof(info));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
info.rti_info[RTAX_DST] = dst;
rt_missmsg(msgtype, &info, 0, err);
}
}
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
done:
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (newrt)
RT_LOCK_ASSERT(newrt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (newrt);
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* Remove a reference count from an rtentry.
* If the count gets low enough, take it out of the routing table
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
void
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtfree(struct rtentry *rt)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
struct radix_node_head *rnh;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
KASSERT(rt != NULL,("%s: NULL rt", __func__));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
rnh = V_rt_tables[rt->rt_fibnum][rt_key(rt)->sa_family];
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
KASSERT(rnh != NULL,("%s: NULL rnh", __func__));
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK_ASSERT(rt);
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
* The callers should use RTFREE_LOCKED() or RTFREE(), so
* we should come here exactly with the last reference.
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
*/
replace explicit changes to rt_refcnt by RT_ADDREF and RT_REMREF macros that expand to include assertions when the system is built with INVARIANTS Supported by: FreeBSD Foundation
2003-11-08 23:36:32 +00:00
RT_REMREF(rt);
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
if (rt->rt_refcnt > 0) {
Add missing \n to printf
2007-06-11 12:19:34 +00:00
printf("%s: %p has %lu refs\n", __func__, rt, rt->rt_refcnt);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
goto done;
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
}
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
/*
* On last reference give the "close method" a chance
* to cleanup private state. This also permits (for
* IPv4 and IPv6) a chance to decide if the routing table
* entry should be purged immediately or at a later time.
* When an immediate purge is to happen the close routine
* typically calls rtexpunge which clears the RTF_UP flag
* on the entry so that the code below reclaims the storage.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (rt->rt_refcnt == 0 && rnh->rnh_close)
Add code to be a bit smarter about IP routes, conditioned on the option IN_RMX. (Eventually this will be standard, but I just wrote the code today and don't want to break anyone.)
1994-11-02 04:41:39 +00:00
rnh->rnh_close((struct radix_node *)rt, rnh);
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* If we are no longer "up" (and ref == 0)
* then we can free the resources associated
* with the route.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if ((rt->rt_flags & RTF_UP) == 0) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (rt->rt_nodes->rn_flags & (RNF_ACTIVE | RNF_ROOT))
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
panic("rtfree 2");
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* the rtentry must have been removed from the routing table
* so it is represented in rttrash.. remove that now.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_rttrash--;
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
#ifdef DIAGNOSTIC
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (rt->rt_refcnt < 0) {
GCC cleanup. Reviewed by: Submitted by: Obtained from:
1994-10-02 17:48:58 +00:00
printf("rtfree: %p not freed (neg refs)\n", rt);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
goto done;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
#endif
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* release references on items we hold them on..
* e.g other routes and ifaddrs.
*/
Lock up ifaddr reference counts.
2002-12-18 11:46:59 +00:00
if (rt->rt_ifa)
IFAFREE(rt->rt_ifa);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt->rt_parent = NULL; /* NB: no refcnt on parent */
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* The key is separatly alloc'd so free it (see rt_setgate()).
* This also frees the gateway, as they are always malloc'd
* together.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Free(rt_key(rt));
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* and the rtentry itself of course
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK_DESTROY(rt);
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
uma_zfree(rtzone, rt);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
done:
RT_UNLOCK(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Force a routing table entry to the specified
* destination to go through the given gateway.
* Normally called as a result of a routing redirect
* message from the network layer.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtredirect(struct sockaddr *dst,
struct sockaddr *gateway,
struct sockaddr *netmask,
int flags,
struct sockaddr *src)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
{
rtredirect_fib(dst, gateway, netmask, flags, src, 0);
}
void
rtredirect_fib(struct sockaddr *dst,
struct sockaddr *gateway,
struct sockaddr *netmask,
int flags,
struct sockaddr *src,
u_int fibnum)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
add interface for allowing consumers to register for ARP updates, redirects, and path MTU changes Reviewed by: silby
2007-12-12 20:53:25 +00:00
struct rtentry *rt, *rt0 = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int error = 0;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
short *stat = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct rt_addrinfo info;
struct ifaddr *ifa;
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
struct radix_node_head *rnh =
Fix a bug introduced in r185747: rather than dereferencing an uninitialized *rt to something undefined, use the fibnum that came in as function argument. Found with: Coverity Prevent(tm) CID: 4168
2008-12-09 19:44:53 +00:00
V_rt_tables[fibnum][dst->sa_family];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/* verify the gateway is directly reachable */
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if ((ifa = ifa_ifwithnet(gateway)) == NULL) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = ENETUNREACH;
goto out;
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rt = rtalloc1_fib(dst, 0, 0UL, fibnum); /* NB: rt is locked */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If the redirect isn't from our current router for this dst,
* it's either old or wrong. If it redirects us to ourselves,
* we have a routing loop, perhaps as a result of an interface
* going down recently.
*/
if (!(flags & RTF_DONE) && rt &&
SMP locking for radix nodes.
2002-12-24 03:03:39 +00:00
(!sa_equal(src, rt->rt_gateway) || rt->rt_ifa != ifa))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EINVAL;
else if (ifa_ifwithaddr(gateway))
error = EHOSTUNREACH;
if (error)
goto done;
/*
* Create a new entry if we just got back a wildcard entry
* or the the lookup failed. This is necessary for hosts
* which use routing redirects generated by smart gateways
* to dynamically build the routing tables.
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rt == NULL || (rt_mask(rt) && rt_mask(rt)->sa_len < 2))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto create;
/*
* Don't listen to the redirect if it's
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* for a route to an interface.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (rt->rt_flags & RTF_GATEWAY) {
if (((rt->rt_flags & RTF_HOST) == 0) && (flags & RTF_HOST)) {
/*
* Changing from route to net => route to host.
* Create new route, rather than smashing route to net.
*/
create:
add interface for allowing consumers to register for ARP updates, redirects, and path MTU changes Reviewed by: silby
2007-12-12 20:53:25 +00:00
rt0 = rt;
rt = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
flags |= RTF_GATEWAY | RTF_DYNAMIC;
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
bzero((caddr_t)&info, sizeof(info));
info.rti_info[RTAX_DST] = dst;
info.rti_info[RTAX_GATEWAY] = gateway;
info.rti_info[RTAX_NETMASK] = netmask;
info.rti_ifa = ifa;
info.rti_flags = flags;
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (rt0 != NULL)
RT_UNLOCK(rt0); /* drop lock to avoid LOR with RNH */
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
error = rtrequest1_fib(RTM_ADD, &info, &rt, fibnum);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (rt != NULL) {
fix typo that caused a panic when processing an ICMP redirect Sponsored by: FreeBSD Foundation
2003-10-05 19:05:53 +00:00
RT_LOCK(rt);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (rt0 != NULL)
EVENTHANDLER_INVOKE(route_redirect_event, rt0, rt, dst);
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
flags = rt->rt_flags;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
}
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (rt0 != NULL)
RTFREE(rt0);
add interface for allowing consumers to register for ARP updates, redirects, and path MTU changes Reviewed by: silby
2007-12-12 20:53:25 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
stat = &V_rtstat.rts_dynamic;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else {
add interface for allowing consumers to register for ARP updates, redirects, and path MTU changes Reviewed by: silby
2007-12-12 20:53:25 +00:00
struct rtentry *gwrt;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Smash the current notion of the gateway to
* this destination. Should check about netmask!!!
*/
rt->rt_flags |= RTF_MODIFIED;
flags |= RTF_MODIFIED;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
stat = &V_rtstat.rts_newgateway;
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* add the key and gateway (in one malloc'd chunk).
*/
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
RT_UNLOCK(rt);
RADIX_NODE_HEAD_LOCK(rnh);
RT_LOCK(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
rt_setgate(rt, rt_key(rt), gateway);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
gwrt = rtalloc1(gateway, 1, RTF_RNH_LOCKED);
RADIX_NODE_HEAD_UNLOCK(rnh);
widen the routing event interface (arp update, redirect, and eventually pmtu change) into separate functions revert previous commit's changes to arpresolve and add a new interface arpresolve2 which does arp resolution without an mbuf
2007-12-17 07:40:34 +00:00
EVENTHANDLER_INVOKE(route_redirect_event, rt, gwrt, dst);
add interface for allowing consumers to register for ARP updates, redirects, and path MTU changes Reviewed by: silby
2007-12-12 20:53:25 +00:00
RTFREE_LOCKED(gwrt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
} else
error = EHOSTUNREACH;
done:
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (rt)
Use RTFREE_LOCKED() instead of rtfree() when releasing a reference on the 'rt' route in rtredirect() as 'rt' is always locked. MFC after: 1 week PR: kern/117913 Submitted by: Stefan Lambrev stefan.lambrev of moneybookers.com
2008-02-13 16:57:58 +00:00
RTFREE_LOCKED(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
out:
if (error)
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_rtstat.rts_badredirect++;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
else if (stat != NULL)
(*stat)++;
bzero((caddr_t)&info, sizeof(info));
info.rti_info[RTAX_DST] = dst;
info.rti_info[RTAX_GATEWAY] = gateway;
info.rti_info[RTAX_NETMASK] = netmask;
info.rti_info[RTAX_AUTHOR] = src;
rt_missmsg(RTM_REDIRECT, &info, flags, error);
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
int
rtioctl(u_long req, caddr_t data)
{
return (rtioctl_fib(req, data, 0));
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Lock up ifaddr reference counts.
2002-12-18 11:46:59 +00:00
* Routing table ioctl interface.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rtioctl_fib(u_long req, caddr_t data, u_int fibnum)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
When a prison is given the ability to create raw sockets (when the security.jail.allow_raw_sockets sysctl MIB is set to 1) where privileged access to jails is given out, it is possible for prison root to manipulate various network parameters which effect the host environment. This commit plugs a number of security holes associated with the use of raw sockets and prisons. This commit makes the following changes: - Add a comment to rtioctl warning developers that if they add any ioctl commands, they should use super-user checks where necessary, as it is possible for PRISON root to make it this far in execution. - Add super-user checks for the execution of the SIOCGETVIFCNT and SIOCGETSGCNT IP multicast ioctl commands. - Add a super-user check to rip_ctloutput(). If the calling cred is PRISON root, make sure the socket option name is IP_HDRINCL, otherwise deny the request. Although this patch corrects a number of security problems associated with raw sockets and prisons, the warning in jail(8) should still apply, and by default we should keep the default value of security.jail.allow_raw_sockets MIB to 0 (or disabled) until we are certain that we have tracked down all the problems. Looking forward, we will probably want to eliminate the references to curthread. This may be a MFC candidate for RELENG_5. Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-21 17:38:57 +00:00
/*
* If more ioctl commands are added here, make sure the proper
* super-user checks are being performed because it is possible for
* prison-root to make it this far if raw sockets have been enabled
* in jails.
*/
GCC cleanup. Reviewed by: Submitted by: Obtained from:
1994-10-02 17:48:58 +00:00
#ifdef INET
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
/* Multicast goop, grrr... */
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
return mrt_ioctl ? mrt_ioctl(req, data, fibnum) : EOPNOTSUPP;
GCC cleanup. Reviewed by: Submitted by: Obtained from:
1994-10-02 17:48:58 +00:00
#else /* INET */
return ENXIO;
#endif /* INET */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
struct ifaddr *
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
ifa_ifwithroute(int flags, struct sockaddr *dst, struct sockaddr *gateway)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
{
return (ifa_ifwithroute_fib(flags, dst, gateway, 0));
}
struct ifaddr *
ifa_ifwithroute_fib(int flags, struct sockaddr *dst, struct sockaddr *gateway,
u_int fibnum)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
register struct ifaddr *ifa;
The current routing code allows insertion of indirect routes that have gateways which are unreachable except through the default router. For example, assuming there is a default route configured, and inserting a route "route add 64.102.54.0/24 60.80.1.1" is currently allowed even when 60.80.1.1 is only reachable through the default route. However, an error is thrown when this route is utilized, say, "ping 64.102.54.1" will return an error This type of route insertion should be disallowed becasue: 1) Let's say that somehow our code allowed this packet to flow to the default router, and the default router knows the next hop is 60.80.1.1, then the question is why bother inserting this route in the 1st place, just simply use the default route. 2) Since we're not talking about source routing here, the default router could very well choose a different path than using 60.80.1.1 for the next hop, again it defeats the purpose of adding this route. Reviewed by: ru, gnn, bz Approved by: andre
2006-05-16 19:11:11 +00:00
int not_found = 0;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if ((flags & RTF_GATEWAY) == 0) {
/*
* If we are adding a route to an interface,
* and the interface is a pt to pt link
* we should search for the destination
* as our clue to the interface. Otherwise
* we can use the local address.
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
ifa = NULL;
if (flags & RTF_HOST)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ifa = ifa_ifwithdstaddr(dst);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (ifa == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ifa = ifa_ifwithaddr(gateway);
} else {
/*
* If we are adding a route to a remote net
* or host, the gateway may still be on the
* other end of a pt to pt link.
*/
ifa = ifa_ifwithdstaddr(gateway);
}
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (ifa == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ifa = ifa_ifwithnet(gateway);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (ifa == NULL) {
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
struct rtentry *rt = rtalloc1_fib(gateway, 0, 0UL, fibnum);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rt == NULL)
return (NULL);
The current routing code allows insertion of indirect routes that have gateways which are unreachable except through the default router. For example, assuming there is a default route configured, and inserting a route "route add 64.102.54.0/24 60.80.1.1" is currently allowed even when 60.80.1.1 is only reachable through the default route. However, an error is thrown when this route is utilized, say, "ping 64.102.54.1" will return an error This type of route insertion should be disallowed becasue: 1) Let's say that somehow our code allowed this packet to flow to the default router, and the default router knows the next hop is 60.80.1.1, then the question is why bother inserting this route in the 1st place, just simply use the default route. 2) Since we're not talking about source routing here, the default router could very well choose a different path than using 60.80.1.1 for the next hop, again it defeats the purpose of adding this route. Reviewed by: ru, gnn, bz Approved by: andre
2006-05-16 19:11:11 +00:00
/*
* dismiss a gateway that is reachable only
* through the default router
*/
switch (gateway->sa_family) {
case AF_INET:
if (satosin(rt_key(rt))->sin_addr.s_addr == INADDR_ANY)
not_found = 1;
break;
case AF_INET6:
if (IN6_IS_ADDR_UNSPECIFIED(&satosin6(rt_key(rt))->sin6_addr))
not_found = 1;
break;
default:
break;
}
replace explicit changes to rt_refcnt by RT_ADDREF and RT_REMREF macros that expand to include assertions when the system is built with INVARIANTS Supported by: FreeBSD Foundation
2003-11-08 23:36:32 +00:00
RT_REMREF(rt);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_UNLOCK(rt);
The current routing code allows insertion of indirect routes that have gateways which are unreachable except through the default router. For example, assuming there is a default route configured, and inserting a route "route add 64.102.54.0/24 60.80.1.1" is currently allowed even when 60.80.1.1 is only reachable through the default route. However, an error is thrown when this route is utilized, say, "ping 64.102.54.1" will return an error This type of route insertion should be disallowed becasue: 1) Let's say that somehow our code allowed this packet to flow to the default router, and the default router knows the next hop is 60.80.1.1, then the question is why bother inserting this route in the 1st place, just simply use the default route. 2) Since we're not talking about source routing here, the default router could very well choose a different path than using 60.80.1.1 for the next hop, again it defeats the purpose of adding this route. Reviewed by: ru, gnn, bz Approved by: andre
2006-05-16 19:11:11 +00:00
if (not_found)
return (NULL);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if ((ifa = rt->rt_ifa) == NULL)
return (NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
if (ifa->ifa_addr->sa_family != dst->sa_family) {
struct ifaddr *oifa = ifa;
ifa = ifaof_ifpforaddr(dst, ifa->ifa_ifp);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (ifa == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ifa = oifa;
}
return (ifa);
}
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
static walktree_f_t rt_fixdelete;
static walktree_f_t rt_fixchange;
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
struct rtfc_arg {
struct rtentry *rt0;
struct radix_node_head *rnh;
};
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* Do appropriate manipulations of a routing tree given
* all the bits of info needed
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtrequest(int req,
struct sockaddr *dst,
struct sockaddr *gateway,
struct sockaddr *netmask,
int flags,
struct rtentry **ret_nrt)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
{
return (rtrequest_fib(req, dst, gateway, netmask, flags, ret_nrt, 0));
}
int
rtrequest_fib(int req,
struct sockaddr *dst,
struct sockaddr *gateway,
struct sockaddr *netmask,
int flags,
struct rtentry **ret_nrt,
u_int fibnum)
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
{
struct rt_addrinfo info;
In rtrequest and rtinit check for sa_len != 0 for the given destination. These checks are needed so we do not install a route looking like this: (0) 192.0.2.200 UH tun0 => When removing this route the kernel will start to walk the address space which looks like a hang on 64bit platforms because it'll take ages while on 32bit you should see a panic when kernel debugging options are turned on. The problem is in rtrequest1: if (netmask) { rt_maskedcopy(dst, ndst, netmask); } else bcopy(dst, ndst, dst->sa_len); In both cases the len might be 0 if the application forgot to set it. If so ndst will be all-zero leading to above mentioned strange routes. This is an application error but we must not fail/hang/panic because of this. Looks ok: gnn No objections: net@ (silence) MFC after: 8 weeks
2006-05-04 18:33:37 +00:00
if (dst->sa_len == 0)
return(EINVAL);
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
bzero((caddr_t)&info, sizeof(info));
info.rti_flags = flags;
info.rti_info[RTAX_DST] = dst;
info.rti_info[RTAX_GATEWAY] = gateway;
info.rti_info[RTAX_NETMASK] = netmask;
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
return rtrequest1_fib(req, &info, ret_nrt, fibnum);
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
}
/*
* These (questionable) definitions of apparent local variables apply
* to the next two functions. XXXXXX!!!
*/
#define dst info->rti_info[RTAX_DST]
#define gateway info->rti_info[RTAX_GATEWAY]
#define netmask info->rti_info[RTAX_NETMASK]
#define ifaaddr info->rti_info[RTAX_IFA]
#define ifpaddr info->rti_info[RTAX_IFP]
#define flags info->rti_flags
int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt_getifa(struct rt_addrinfo *info)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
{
return (rt_getifa_fib(info, 0));
}
int
rt_getifa_fib(struct rt_addrinfo *info, u_int fibnum)
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
{
struct ifaddr *ifa;
int error = 0;
/*
* ifp may be specified by sockaddr_dl
* when protocol address is ambiguous.
*/
if (info->rti_ifp == NULL && ifpaddr != NULL &&
ifpaddr->sa_family == AF_LINK &&
(ifa = ifa_ifwithnet(ifpaddr)) != NULL)
info->rti_ifp = ifa->ifa_ifp;
if (info->rti_ifa == NULL && ifaaddr != NULL)
info->rti_ifa = ifa_ifwithaddr(ifaaddr);
if (info->rti_ifa == NULL) {
struct sockaddr *sa;
sa = ifaaddr != NULL ? ifaaddr :
(gateway != NULL ? gateway : dst);
if (sa != NULL && info->rti_ifp != NULL)
info->rti_ifa = ifaof_ifpforaddr(sa, info->rti_ifp);
else if (dst != NULL && gateway != NULL)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
info->rti_ifa = ifa_ifwithroute_fib(flags, dst, gateway,
fibnum);
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
else if (sa != NULL)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
info->rti_ifa = ifa_ifwithroute_fib(flags, sa, sa,
fibnum);
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
}
if ((ifa = info->rti_ifa) != NULL) {
if (info->rti_ifp == NULL)
info->rti_ifp = ifa->ifa_ifp;
} else
error = ENETUNREACH;
return (error);
}
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
/*
* Expunges references to a route that's about to be reclaimed.
* The route must be locked.
*/
int
rtexpunge(struct rtentry *rt)
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
struct radix_node *rn;
struct radix_node_head *rnh;
struct ifaddr *ifa;
int error = 0;
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
rnh = V_rt_tables[rt->rt_fibnum][rt_key(rt)->sa_family];
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
RT_LOCK_ASSERT(rt);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
RADIX_NODE_HEAD_LOCK_ASSERT(rnh);
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
#if 0
/*
* We cannot assume anything about the reference count
* because protocols call us in many situations; often
* before unwinding references to the table entry.
*/
KASSERT(rt->rt_refcnt <= 1, ("bogus refcnt %ld", rt->rt_refcnt));
#endif
/*
* Find the correct routing tree to use for this Address Family
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
rnh = V_rt_tables[rt->rt_fibnum][rt_key(rt)->sa_family];
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rnh == NULL)
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
return (EAFNOSUPPORT);
/*
* Remove the item from the tree; it should be there,
* but when callers invoke us blindly it may not (sigh).
*/
rn = rnh->rnh_deladdr(rt_key(rt), rt_mask(rt), rnh);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rn == NULL) {
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
error = ESRCH;
goto bad;
}
KASSERT((rn->rn_flags & (RNF_ACTIVE | RNF_ROOT)) == 0,
("unexpected flags 0x%x", rn->rn_flags));
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
KASSERT(rt == RNTORT(rn),
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
("lookup mismatch, rt %p rn %p", rt, rn));
rt->rt_flags &= ~RTF_UP;
/*
* Now search what's left of the subtree for any cloned
* routes which might have been formed from this node.
*/
- avoid recursively locking the radix node head lock - assert that it is held if RTF_RNH_LOCKED is not passed
2008-12-08 20:21:57 +00:00
if ((rt->rt_flags & RTF_CLONING) && rt_mask(rt))
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
rnh->rnh_walktree_from(rnh, rt_key(rt), rt_mask(rt),
rt_fixdelete, rt);
/*
* Remove any external references we may have.
* This might result in another rtentry being freed if
* we held its last reference.
*/
if (rt->rt_gwroute) {
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
RTFREE(rt->rt_gwroute);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
rt->rt_gwroute = NULL;
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
}
/*
* Give the protocol a chance to keep things in sync.
*/
if ((ifa = rt->rt_ifa) && ifa->ifa_rtrequest) {
struct rt_addrinfo info;
bzero((caddr_t)&info, sizeof(info));
info.rti_flags = rt->rt_flags;
info.rti_info[RTAX_DST] = rt_key(rt);
info.rti_info[RTAX_GATEWAY] = rt->rt_gateway;
info.rti_info[RTAX_NETMASK] = rt_mask(rt);
ifa->ifa_rtrequest(RTM_DELETE, rt, &info);
}
/*
* one more rtentry floating around that is not
* linked to the routing table.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_rttrash++;
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
bad:
return (error);
}
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rtrequest1(int req, struct rt_addrinfo *info, struct rtentry **ret_nrt)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
{
return (rtrequest1_fib(req, info, ret_nrt, 0));
}
int
rtrequest1_fib(int req, struct rt_addrinfo *info, struct rtentry **ret_nrt,
u_int fibnum)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
int error = 0, needlock = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct rtentry *rt;
register struct radix_node *rn;
register struct radix_node_head *rnh;
struct ifaddr *ifa;
struct sockaddr *ndst;
#define senderr(x) { error = x ; goto bad; }
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
KASSERT((fibnum < rt_numfibs), ("rtrequest1_fib: bad fibnum"));
if (dst->sa_family != AF_INET) /* Only INET supports > 1 fib now */
fibnum = 0;
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* Find the correct routing tree to use for this Address Family
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
rnh = V_rt_tables[fibnum][dst->sa_family];
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rnh == NULL)
No need to unlock if error detected before locking. Submitted by: harti
2003-04-13 06:21:02 +00:00
return (EAFNOSUPPORT);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
needlock = ((flags & RTF_RNH_LOCKED) == 0);
flags &= ~RTF_RNH_LOCKED;
if (needlock)
RADIX_NODE_HEAD_LOCK(rnh);
- avoid recursively locking the radix node head lock - assert that it is held if RTF_RNH_LOCKED is not passed
2008-12-08 20:21:57 +00:00
else
RADIX_NODE_HEAD_LOCK_ASSERT(rnh);
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* If we are adding a host route then we don't want to put
Don't even attempt to clone host routes. MFC after: 1 week
2001-10-15 09:46:48 +00:00
* a netmask in the tree, nor do we want to clone it.
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
Don't even attempt to clone host routes. MFC after: 1 week
2001-10-15 09:46:48 +00:00
if (flags & RTF_HOST) {
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
netmask = NULL;
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
flags &= ~RTF_CLONING;
Don't even attempt to clone host routes. MFC after: 1 week
2001-10-15 09:46:48 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
switch (req) {
case RTM_DELETE:
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
/*
* if we got multipath routes, we require users to specify
* a matching RTAX_GATEWAY.
*/
if (rn_mpath_capable(rnh)) {
struct rtentry *rto = NULL;
rn = rnh->rnh_matchaddr(dst, rnh);
if (rn == NULL)
senderr(ESRCH);
rto = rt = RNTORT(rn);
rt = rt_mpath_matchgate(rt, gateway);
if (!rt)
senderr(ESRCH);
/*
* this is the first entry in the chain
*/
if (rto == rt) {
rn = rn_mpath_next((struct radix_node *)rt);
/*
* there is another entry, now it's active
*/
if (rn) {
rto = RNTORT(rn);
RT_LOCK(rto);
rto->rt_flags |= RTF_UP;
RT_UNLOCK(rto);
} else if (rt->rt_flags & RTF_GATEWAY) {
/*
* For gateway routes, we need to
* make sure that we we are deleting
* the correct gateway.
* rt_mpath_matchgate() does not
* check the case when there is only
* one route in the chain.
*/
if (gateway &&
(rt->rt_gateway->sa_len != gateway->sa_len ||
memcmp(rt->rt_gateway, gateway, gateway->sa_len)))
senderr(ESRCH);
}
/*
* use the normal delete code to remove
* the first entry
*/
goto normal_rtdel;
}
/*
* if the entry is 2nd and on up
*/
if (!rt_mpath_deldup(rto, rt))
panic ("rtrequest1: rt_mpath_deldup");
RT_LOCK(rt);
RT_ADDREF(rt);
rt->rt_flags &= ~RTF_UP;
goto deldone; /* done with the RTM_DELETE command */
}
normal_rtdel:
Fix the build in case RADIX_MPATH is not defined.
2008-04-13 10:22:59 +00:00
#endif
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* Remove the item from the tree and return it.
* Complain if it is not there and do no more processing.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rn = rnh->rnh_deladdr(dst, netmask, rnh);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rn == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
senderr(ESRCH);
if (rn->rn_flags & (RNF_ACTIVE | RNF_ROOT))
panic ("rtrequest delete");
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
rt = RNTORT(rn);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK(rt);
replace explicit changes to rt_refcnt by RT_ADDREF and RT_REMREF macros that expand to include assertions when the system is built with INVARIANTS Supported by: FreeBSD Foundation
2003-11-08 23:36:32 +00:00
RT_ADDREF(rt);
If the caller of rtrequest*(RTM_DELETE, ...) asked for a copy of the entry being removed (ret_nrt != NULL), increment the entry's rt_refcnt like we do it for RTM_ADD and RTM_RESOLVE, rather than messing around with 1->0 transitions for rtfree() all over.
2002-12-25 10:21:02 +00:00
rt->rt_flags &= ~RTF_UP;
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
/*
* Now search what's left of the subtree for any cloned
* routes which might have been formed from this node.
*/
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
if ((rt->rt_flags & RTF_CLONING) &&
net/route.c: A route generated from an RTF_CLONING route had the RTF_WASCLONED flag set but did not have a reference to the parent route, as documented in the rtentry(9) manpage. This prevented such routes from being deleted when their parent route is deleted. Now, for example, if you delete an IP address from a network interface, all ARP entries that were cloned from this interface route are flushed. This also has an impact on netstat(1) output. Previously, dynamically created ARP cache entries (RTF_STATIC flag is unset) were displayed as part of the routing table display (-r). Now, they are only printed if the -a option is given. netinet/in.c, netinet/in_rmx.c: When address is removed from an interface, also delete all routes that point to this interface and address. Previously, for example, if you changed the address on an interface, outgoing IP datagrams might still use the old address. The only solution was to delete and re-add some routes. (The problem is easily observed with the route(8) command.) Note, that if the socket was already bound to the local address before this address is removed, new datagrams generated from this socket will still be sent from the old address. PR: kern/20785, kern/21914 Reviewed by: wollman (the idea)
2001-03-15 14:52:12 +00:00
rt_mask(rt)) {
rnh->rnh_walktree_from(rnh, dst, rt_mask(rt),
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
rt_fixdelete, rt);
}
radix.c: correct exit condition in rn_walktree_from() route.c: be a little more careful when running deleting children of dying . routes
1995-03-23 18:07:29 +00:00
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
* Remove any external references we may have.
* This might result in another rtentry being freed if
Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108.
1998-04-17 22:37:19 +00:00
* we held its last reference.
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
Eliminate panic("rtfree") caused by double-freeing the route when rt == rt->rt_gwroute . rt == rt->gwroute shouldn't happen in the first place, but that's another problem. (try "route add -host <hostonmynet> <hostonmynet>; ping <hostonmynet>; route delete <hostonmynet>")
1996-03-29 08:02:30 +00:00
if (rt->rt_gwroute) {
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
RTFREE(rt->rt_gwroute);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
rt->rt_gwroute = NULL;
Eliminate panic("rtfree") caused by double-freeing the route when rt == rt->rt_gwroute . rt == rt->gwroute shouldn't happen in the first place, but that's another problem. (try "route add -host <hostonmynet> <hostonmynet>; ping <hostonmynet>; route delete <hostonmynet>")
1996-03-29 08:02:30 +00:00
}
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* give the protocol a chance to keep things in sync.
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if ((ifa = rt->rt_ifa) && ifa->ifa_rtrequest)
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
ifa->ifa_rtrequest(RTM_DELETE, rt, info);
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
Fix the build in case RADIX_MPATH is not defined.
2008-04-13 10:22:59 +00:00
#ifdef RADIX_MPATH
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
deldone:
Fix the build in case RADIX_MPATH is not defined.
2008-04-13 10:22:59 +00:00
#endif
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
* One more rtentry floating around that is not
* linked to the routing table. rttrash will be decremented
* when RTFREE(rt) is eventually called.
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_rttrash++;
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* If the caller wants it, then it can have it,
* but it's up to it to free the rtentry as we won't be
* doing it.
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (ret_nrt) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*ret_nrt = rt;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_UNLOCK(rt);
} else
RTFREE_LOCKED(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case RTM_RESOLVE:
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (ret_nrt == NULL || (rt = *ret_nrt) == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
senderr(EINVAL);
ifa = rt->rt_ifa;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
/* XXX locking? */
Made minor readability tweak.
1995-03-20 23:00:57 +00:00
flags = rt->rt_flags &
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
~(RTF_CLONING | RTF_STATIC);
Add support for two separate cloning flags, one set by the lower layers, and one set by the protocol family. Also add another parameter to rtalloc1() to allow for any interface flags to be ignored; currently this is only useful for RTF_PRCLONING. Get rid of rt_prflags and re-unite with rt_flags. Add T/TCP ``route metrics''. NB: YOU MUST RECOMPILE `route' AND OTHER RELATED PROGRAMS AS A RESULT OF THIS CHANGE. This also adds a new interface parameter, `ifi_physical', which will eventually replace IFF_ALTPHYS as the mechanism for specifying the particular physical connection desired on a multiple-connection card. NB: YOU MUST RECOMPILE `ifconfig' AND OTHER RELATED PROGRAMS AS A RESULT OF THIS CHANGE.
1994-12-13 22:31:49 +00:00
flags |= RTF_WASCLONED;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
gateway = rt->rt_gateway;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if ((netmask = rt->rt_genmask) == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
flags |= RTF_HOST;
goto makeroute;
case RTM_ADD:
Fix a bug which caused panics when attempting to change just the flags of a route. (This still doesn't work, but it doesn't panic now.) It looks like there may be a number of incipient bugs in this code. Also, get ready for the time when all IP gateway routes are cloning, which is necessary to keep proper TCP statistics.
1994-10-11 23:16:38 +00:00
if ((flags & RTF_GATEWAY) && !gateway)
Require gateways for routes to be of the same address family as the route itself. It fixes a bug where an IPv4 route for example has an IPv6 gateway specified: route add 10.1.1.1 -inet6 fe80::1%fxp0 Destination Gateway Flags Refs Use Netif Expire 10.1.1.1 fe80::1%fxp0 UGHS 0 0 fxp0 The fix rejects these illegal combinations: route: writing to routing socket: Invalid argument add host 10.1.1.1: gateway fe80::1%fxp0: Invalid argument Reviewed by: KAME jinmei@isl.rdc.toshiba.co.jp Reviewed by: andre (mentor) Approved by: re MFC after: 5
2005-06-28 23:32:22 +00:00
senderr(EINVAL);
if (dst && gateway && (dst->sa_family != gateway->sa_family) &&
(gateway->sa_family != AF_UNSPEC) && (gateway->sa_family != AF_LINK))
senderr(EINVAL);
Fix a bug which caused panics when attempting to change just the flags of a route. (This still doesn't work, but it doesn't panic now.) It looks like there may be a number of incipient bugs in this code. Also, get ready for the time when all IP gateway routes are cloning, which is necessary to keep proper TCP statistics.
1994-10-11 23:16:38 +00:00
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
if (info->rti_ifa == NULL && (error = rt_getifa_fib(info, fibnum)))
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
senderr(error);
ifa = info->rti_ifa;
Fix a bug which caused panics when attempting to change just the flags of a route. (This still doesn't work, but it doesn't panic now.) It looks like there may be a number of incipient bugs in this code. Also, get ready for the time when all IP gateway routes are cloning, which is necessary to keep proper TCP statistics.
1994-10-11 23:16:38 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
makeroute:
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
rt = uma_zalloc(rtzone, M_NOWAIT | M_ZERO);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rt == NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
senderr(ENOBUFS);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK_INIT(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
rt->rt_flags = RTF_UP | flags;
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rt->rt_fibnum = fibnum;
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* Add the gateway. Possibly re-malloc-ing the storage for it
* also add the rt_gwroute if possible.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK(rt);
Fix warnings in preparation for adding -Wall -Wcast-qual to the kernel compile
1999-01-27 22:42:27 +00:00
if ((error = rt_setgate(rt, dst, gateway)) != 0) {
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK_DESTROY(rt);
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
uma_zfree(rtzone, rt);
Bugfix and simplification for rev 1.34: make sure that the route is non-null before trying to delete it in rt_setgate(), which then allows removal of the special-case code from the RTM_ADD case. This should fix the panics that joerg and Phil Karn have been seeing.
1996-09-02 02:49:40 +00:00
senderr(error);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* point to the (possibly newly malloc'd) dest address.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
ndst = (struct sockaddr *)rt_key(rt);
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* make sure it contains the value we want (masked if needed).
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (netmask) {
rt_maskedcopy(dst, ndst, netmask);
} else
replace Bcopy with bcopy as in the rest of the file.
2004-04-18 11:46:29 +00:00
bcopy(dst, ndst, dst->sa_len);
When adding a route, set rt_ifa and rt_ifp a little earlier so that the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
/*
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* Note that we now have a reference to the ifa.
When adding a route, set rt_ifa and rt_ifp a little earlier so that the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
* This moved from below so that rnh->rnh_addaddr() can
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* examine the ifa and ifa->ifa_ifp if it so desires.
When adding a route, set rt_ifa and rt_ifp a little earlier so that the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
*/
Lock up ifaddr reference counts.
2002-12-18 11:46:59 +00:00
IFAREF(ifa);
When adding a route, set rt_ifa and rt_ifp a little earlier so that the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
rt->rt_ifa = ifa;
rt->rt_ifp = ifa->ifa_ifp;
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
/* do not permit exactly the same dst/mask/gw pair */
if (rn_mpath_capable(rnh) &&
rt_mpath_conflict(rnh, rt, netmask)) {
if (rt->rt_gwroute)
RTFREE(rt->rt_gwroute);
if (rt->rt_ifa) {
IFAFREE(rt->rt_ifa);
}
Free(rt_key(rt));
RT_LOCK_DESTROY(rt);
uma_zfree(rtzone, rt);
senderr(EEXIST);
}
#endif
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
/* XXX mtu manipulation will be done in rnh_addaddr -- itojun */
rn = rnh->rnh_addaddr(ndst, netmask, rnh, rt->rt_nodes);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rn == NULL) {
When adding a route fails because there is already a route with the same (mask,value) in the tree, don't immediately return EEXIST. Instead, check to see if the pre-existing route was generated by protcol-cloning. If so, then it is OK to simply blow away the old route and re-attempt the insertion. If not, then fall back to the same error code as before.
1995-10-16 19:09:40 +00:00
struct rtentry *rt2;
/*
* Uh-oh, we already have one of these in the tree.
* We do a special hack: if the route that's already
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
* there was generated by the cloning mechanism
* then we just blow it away and retry the insertion
* of the new one.
When adding a route fails because there is already a route with the same (mask,value) in the tree, don't immediately return EEXIST. Instead, check to see if the pre-existing route was generated by protcol-cloning. If so, then it is OK to simply blow away the old route and re-attempt the insertion. If not, then fall back to the same error code as before.
1995-10-16 19:09:40 +00:00
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rt2 = rtalloc1_fib(dst, 0, 0, fibnum);
When adding a route fails because there is already a route with the same (mask,value) in the tree, don't immediately return EEXIST. Instead, check to see if the pre-existing route was generated by protcol-cloning. If so, then it is OK to simply blow away the old route and re-attempt the insertion. If not, then fall back to the same error code as before.
1995-10-16 19:09:40 +00:00
if (rt2 && rt2->rt_parent) {
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
rtexpunge(rt2);
RT_UNLOCK(rt2);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rn = rnh->rnh_addaddr(ndst, netmask,
When adding a route fails because there is already a route with the same (mask,value) in the tree, don't immediately return EEXIST. Instead, check to see if the pre-existing route was generated by protcol-cloning. If so, then it is OK to simply blow away the old route and re-attempt the insertion. If not, then fall back to the same error code as before.
1995-10-16 19:09:40 +00:00
rnh, rt->rt_nodes);
Fix memory leak in case of adding a host route on top of another one. Pointed-out-by: Bill Fenner <fenner@parc.xerox.com>
1996-01-24 20:27:19 +00:00
} else if (rt2) {
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/* undo the extra ref we got */
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RTFREE_LOCKED(rt2);
When adding a route fails because there is already a route with the same (mask,value) in the tree, don't immediately return EEXIST. Instead, check to see if the pre-existing route was generated by protcol-cloning. If so, then it is OK to simply blow away the old route and re-attempt the insertion. If not, then fall back to the same error code as before.
1995-10-16 19:09:40 +00:00
}
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* If it still failed to go into the tree,
* then un-make it (this should be a function)
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rn == NULL) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (rt->rt_gwroute)
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RTFREE(rt->rt_gwroute);
if (rt->rt_ifa)
When adding a route, set rt_ifa and rt_ifp a little earlier so that the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
IFAFREE(rt->rt_ifa);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Free(rt_key(rt));
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK_DESTROY(rt);
Convert the routing table to use an UMA zone for rtentries. The zone is called "rtentry". This saves a considerable amount of kernel memory. R_Zmalloc previously used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132 bytes. Idea from: OpenBSD
2004-08-11 17:26:56 +00:00
uma_zfree(rtzone, rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
senderr(EEXIST);
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
rt->rt_parent = NULL;
Protocol-cloned routes should gain a reference to their parents to make sure that rt->rt_parent values can never be re-used harmfully.
1995-03-21 19:50:34 +00:00
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* If we got here from RESOLVE, then we are cloning
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
* so clone the rest, and note that we
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* are a clone (and increment the parent's references)
*/
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
if (req == RTM_RESOLVE) {
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
KASSERT(ret_nrt && *ret_nrt,
("no route to clone from"));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
rt->rt_rmx = (*ret_nrt)->rt_rmx; /* copy metrics */
Ensure that packet counts are always reset to 0 when a route is cloned. Previously, they took on the count of their parent route (which was sometimes nonzero.) Submitted by: Andre Oppermann <oppermann@pipeline.ch> MFC after: 5 days
2002-05-31 04:27:51 +00:00
rt->rt_rmx.rmx_pksent = 0; /* reset packet counter */
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
if ((*ret_nrt)->rt_flags & RTF_CLONING) {
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
/*
* NB: We do not bump the refcnt on the parent
* entry under the assumption that it will
* remain so long as we do. This is
* important when deleting the parent route
* as this operation requires traversing
* the tree to delete all clones and futzing
* with refcnts requires us to double-lock
* parent through this back reference.
*/
rt->rt_parent = *ret_nrt;
Protocol-cloned routes should gain a reference to their parents to make sure that rt->rt_parent values can never be re-used harmfully.
1995-03-21 19:50:34 +00:00
}
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
* If this protocol has something to add to this then
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
* allow it to do that as well.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ifa->ifa_rtrequest)
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
ifa->ifa_rtrequest(req, rt, info);
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
/*
* We repeat the same procedure from rt_setgate() here because
* it doesn't fire when we call it there because the node
* hasn't been added to the tree yet.
*/
rn_walktree*() compute the next leaf before applying a function to current leaves because function may vanish the current node. If parent RTA_GENMASK route has a clone (a "cloning clone"), an rn_walktree_from() starting from parent will cause another walk starting from clone. If a function is either rt_fixdelete() or rt_fixchange(), this recursive walk may vanish the leaf that is remembered by an outer walk (the "next leaf" above), panicing a system when it resumes with an outer walk. The following script paniced my single-user mode booted system: : sysctl net.inet.ip.forwarding=1 : ipfw add 1 allow ip from any to any : ifconfig lo0 127.1 : route add -net 10 -genmask 255.255.255.0 127.1 : telnet 10.1 # rt_fixchange() panic : telnet 10.2 : telnet 10.1 : route delete -net 10 # rt_fixdelete() panic For the time being, avoid these races by disallowing recursive walks in rt_fixchange() and rt_fixdelete(). Also, make a slight optimization in the rtrequest(RTM_RESOLVE) case: there is no reason to call rt_fixchange() in this case. PR: kern/37606 MFC after: 5 days
2002-12-23 13:12:41 +00:00
if (req == RTM_ADD &&
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
!(rt->rt_flags & RTF_HOST) && rt_mask(rt) != NULL) {
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
struct rtfc_arg arg;
arg.rnh = rnh;
arg.rt0 = rt;
rnh->rnh_walktree_from(rnh, rt_key(rt), rt_mask(rt),
rt_fixchange, &arg);
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
* actually return a resultant rtentry and
* give the caller a single reference.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ret_nrt) {
*ret_nrt = rt;
replace explicit changes to rt_refcnt by RT_ADDREF and RT_REMREF macros that expand to include assertions when the system is built with INVARIANTS Supported by: FreeBSD Foundation
2003-11-08 23:36:32 +00:00
RT_ADDREF(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_UNLOCK(rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
default:
error = EOPNOTSUPP;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
bad:
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
if (needlock)
RADIX_NODE_HEAD_UNLOCK(rnh);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (error);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
#undef senderr
}
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
#undef dst
#undef gateway
#undef netmask
#undef ifaaddr
#undef ifpaddr
#undef flags
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
/*
* Called from rtrequest(RTM_DELETE, ...) to fix up the route's ``family''
* (i.e., the routes related to it by the operation of cloning). This
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
* routine is iterated over all potential former-child-routes by way of
* rnh->rnh_walktree_from() above, and those that actually are children of
* the late parent (passed in as VP here) are themselves deleted.
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
*/
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
static int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt_fixdelete(struct radix_node *rn, void *vp)
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
{
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
struct rtentry *rt = RNTORT(rn);
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
struct rtentry *rt0 = vp;
rn_walktree*() compute the next leaf before applying a function to current leaves because function may vanish the current node. If parent RTA_GENMASK route has a clone (a "cloning clone"), an rn_walktree_from() starting from parent will cause another walk starting from clone. If a function is either rt_fixdelete() or rt_fixchange(), this recursive walk may vanish the leaf that is remembered by an outer walk (the "next leaf" above), panicing a system when it resumes with an outer walk. The following script paniced my single-user mode booted system: : sysctl net.inet.ip.forwarding=1 : ipfw add 1 allow ip from any to any : ifconfig lo0 127.1 : route add -net 10 -genmask 255.255.255.0 127.1 : telnet 10.1 # rt_fixchange() panic : telnet 10.2 : telnet 10.1 : route delete -net 10 # rt_fixdelete() panic For the time being, avoid these races by disallowing recursive walks in rt_fixchange() and rt_fixdelete(). Also, make a slight optimization in the rtrequest(RTM_RESOLVE) case: there is no reason to call rt_fixchange() in this case. PR: kern/37606 MFC after: 5 days
2002-12-23 13:12:41 +00:00
if (rt->rt_parent == rt0 &&
Remove RTF_PRCLONING from routing table and adjust users of it accordingly. The define is left intact for ABI compatibility with userland. This is a pre-step for the introduction of tcp_hostcache. The network stack remains fully useable with this change. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 19:47:31 +00:00
!(rt->rt_flags & (RTF_PINNED | RTF_CLONING))) {
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
return rtrequest_fib(RTM_DELETE, rt_key(rt), NULL, rt_mask(rt),
- avoid recursively locking the radix node head lock - assert that it is held if RTF_RNH_LOCKED is not passed
2008-12-08 20:21:57 +00:00
rt->rt_flags|RTF_RNH_LOCKED, NULL, rt->rt_fibnum);
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
}
Better fix for the deletion of parents of cloned routes problem, superseding the `nextchild' hack. This also provides a way forward to fix RTM_CHANGE and RTM_ADD as well.
1995-03-20 21:30:21 +00:00
return 0;
route.c: keep track of where cloned routes come from, and make sure to delete them when the ``parent'' goes away route.h: add glue to track this to rtentry structure. WARNING WILL ROBINSON! This will be yet another incompatible change in your route-using binaries. I apologize, but this was the only way to do it. I took this opportunity to increase the size of the metrics to what I believe will be the final length for 2.1, so that when the T/TCP stuff is done, this won't happen again.
1995-01-23 02:00:35 +00:00
}
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
/*
* This routine is called from rt_setgate() to do the analogous thing for
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* adds and changes. There is the added complication in this case of a
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
* middle insert; i.e., insertion of a new network route between an older
* network route and (cloned) host routes. For this reason, a simple check
* of rt->rt_parent is insufficient; each candidate route must be tested
* against the (mask, value) of the new route (passed as before in vp)
As commented in defined in sys/net/route.c, rt_fixchange() has a bad effect, which would cause unnecessary route deletion: * Unfortunately, this has the obnoxious * property of also triggering for insertion /above/ a pre-existing network * route and clones. Sigh. This may be fixed some day. The effect has been even worse, because recent versions of route.c set the parent rtentry for cloned routes from an interface-direct route. For example, suppose that we have an interface "ne0" that has an IPv4 subnet "10.0.0.0/24". Then we may have a cloned route like 10.0.0.1 on the interface, whose parent route is 10.0.0.0/24 (to the interface ne0). Now, when we add the default route (i.e. 0.0.0.0/0), rt_fixchange() will remove the cloned route 10.0.0.1. The (bad) effect also prevents rt_setgate from configuring rt_gwroute, which would not be an intended behavior. As suggested in the comments to rt_fixchange(), we need stricter check in the function, to prevent unintentional route deletion. This fix also solve the "IPV6 panic?" problem in nd6_timer(). Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp> MFC after: 4 days
2001-07-25 19:31:43 +00:00
* to see if the new route matches it.
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
*
* XXX - it may be possible to do fixdelete() for changes and reserve this
* routine just for adds. I'm not sure why I thought it was necessary to do
* changes this way.
*/
static int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt_fixchange(struct radix_node *rn, void *vp)
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
{
Clearly comment the assumptions that allow us to cast a 'struct radix_node *' to a 'struct rtentry *' in this code, and introduce a macro, RNTORT(), to do this type conversion.
2004-04-21 15:16:08 +00:00
struct rtentry *rt = RNTORT(rn);
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
struct rtfc_arg *ap = vp;
struct rtentry *rt0 = ap->rt0;
struct radix_node_head *rnh = ap->rnh;
As commented in defined in sys/net/route.c, rt_fixchange() has a bad effect, which would cause unnecessary route deletion: * Unfortunately, this has the obnoxious * property of also triggering for insertion /above/ a pre-existing network * route and clones. Sigh. This may be fixed some day. The effect has been even worse, because recent versions of route.c set the parent rtentry for cloned routes from an interface-direct route. For example, suppose that we have an interface "ne0" that has an IPv4 subnet "10.0.0.0/24". Then we may have a cloned route like 10.0.0.1 on the interface, whose parent route is 10.0.0.0/24 (to the interface ne0). Now, when we add the default route (i.e. 0.0.0.0/0), rt_fixchange() will remove the cloned route 10.0.0.1. The (bad) effect also prevents rt_setgate from configuring rt_gwroute, which would not be an intended behavior. As suggested in the comments to rt_fixchange(), we need stricter check in the function, to prevent unintentional route deletion. This fix also solve the "IPV6 panic?" problem in nd6_timer(). Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp> MFC after: 4 days
2001-07-25 19:31:43 +00:00
u_char *xk1, *xm1, *xk2, *xmp;
int i, len, mlen;
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
/* make sure we have a parent, and route is not pinned or cloning */
rn_walktree*() compute the next leaf before applying a function to current leaves because function may vanish the current node. If parent RTA_GENMASK route has a clone (a "cloning clone"), an rn_walktree_from() starting from parent will cause another walk starting from clone. If a function is either rt_fixdelete() or rt_fixchange(), this recursive walk may vanish the leaf that is remembered by an outer walk (the "next leaf" above), panicing a system when it resumes with an outer walk. The following script paniced my single-user mode booted system: : sysctl net.inet.ip.forwarding=1 : ipfw add 1 allow ip from any to any : ifconfig lo0 127.1 : route add -net 10 -genmask 255.255.255.0 127.1 : telnet 10.1 # rt_fixchange() panic : telnet 10.2 : telnet 10.1 : route delete -net 10 # rt_fixdelete() panic For the time being, avoid these races by disallowing recursive walks in rt_fixchange() and rt_fixdelete(). Also, make a slight optimization in the rtrequest(RTM_RESOLVE) case: there is no reason to call rt_fixchange() in this case. PR: kern/37606 MFC after: 5 days
2002-12-23 13:12:41 +00:00
if (!rt->rt_parent ||
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
(rt->rt_flags & (RTF_PINNED | RTF_CLONING)))
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
return 0;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rt->rt_parent == rt0) /* parent match */
goto delete_rt;
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
/*
* There probably is a function somewhere which does this...
* if not, there should be.
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
len = imin(rt_key(rt0)->sa_len, rt_key(rt)->sa_len);
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
xk1 = (u_char *)rt_key(rt0);
xm1 = (u_char *)rt_mask(rt0);
xk2 = (u_char *)rt_key(rt);
As commented in defined in sys/net/route.c, rt_fixchange() has a bad effect, which would cause unnecessary route deletion: * Unfortunately, this has the obnoxious * property of also triggering for insertion /above/ a pre-existing network * route and clones. Sigh. This may be fixed some day. The effect has been even worse, because recent versions of route.c set the parent rtentry for cloned routes from an interface-direct route. For example, suppose that we have an interface "ne0" that has an IPv4 subnet "10.0.0.0/24". Then we may have a cloned route like 10.0.0.1 on the interface, whose parent route is 10.0.0.0/24 (to the interface ne0). Now, when we add the default route (i.e. 0.0.0.0/0), rt_fixchange() will remove the cloned route 10.0.0.1. The (bad) effect also prevents rt_setgate from configuring rt_gwroute, which would not be an intended behavior. As suggested in the comments to rt_fixchange(), we need stricter check in the function, to prevent unintentional route deletion. This fix also solve the "IPV6 panic?" problem in nd6_timer(). Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp> MFC after: 4 days
2001-07-25 19:31:43 +00:00
/* avoid applying a less specific route */
xmp = (u_char *)rt_mask(rt->rt_parent);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
mlen = rt_key(rt->rt_parent)->sa_len;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (mlen > rt_key(rt0)->sa_len) /* less specific route */
As commented in defined in sys/net/route.c, rt_fixchange() has a bad effect, which would cause unnecessary route deletion: * Unfortunately, this has the obnoxious * property of also triggering for insertion /above/ a pre-existing network * route and clones. Sigh. This may be fixed some day. The effect has been even worse, because recent versions of route.c set the parent rtentry for cloned routes from an interface-direct route. For example, suppose that we have an interface "ne0" that has an IPv4 subnet "10.0.0.0/24". Then we may have a cloned route like 10.0.0.1 on the interface, whose parent route is 10.0.0.0/24 (to the interface ne0). Now, when we add the default route (i.e. 0.0.0.0/0), rt_fixchange() will remove the cloned route 10.0.0.1. The (bad) effect also prevents rt_setgate from configuring rt_gwroute, which would not be an intended behavior. As suggested in the comments to rt_fixchange(), we need stricter check in the function, to prevent unintentional route deletion. This fix also solve the "IPV6 panic?" problem in nd6_timer(). Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp> MFC after: 4 days
2001-07-25 19:31:43 +00:00
return 0;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
for (i = rnh->rnh_treetop->rn_offset; i < mlen; i++)
if ((xmp[i] & ~(xmp[i] ^ xm1[i])) != xmp[i])
return 0; /* less specific route */
As commented in defined in sys/net/route.c, rt_fixchange() has a bad effect, which would cause unnecessary route deletion: * Unfortunately, this has the obnoxious * property of also triggering for insertion /above/ a pre-existing network * route and clones. Sigh. This may be fixed some day. The effect has been even worse, because recent versions of route.c set the parent rtentry for cloned routes from an interface-direct route. For example, suppose that we have an interface "ne0" that has an IPv4 subnet "10.0.0.0/24". Then we may have a cloned route like 10.0.0.1 on the interface, whose parent route is 10.0.0.0/24 (to the interface ne0). Now, when we add the default route (i.e. 0.0.0.0/0), rt_fixchange() will remove the cloned route 10.0.0.1. The (bad) effect also prevents rt_setgate from configuring rt_gwroute, which would not be an intended behavior. As suggested in the comments to rt_fixchange(), we need stricter check in the function, to prevent unintentional route deletion. This fix also solve the "IPV6 panic?" problem in nd6_timer(). Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp> MFC after: 4 days
2001-07-25 19:31:43 +00:00
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
for (i = rnh->rnh_treetop->rn_offset; i < len; i++)
if ((xk2[i] & xm1[i]) != xk1[i])
return 0; /* no match */
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
/*
* OK, this node is a clone, and matches the node currently being
* changed/added under the node's mask. So, get rid of it.
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
delete_rt:
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
return rtrequest_fib(RTM_DELETE, rt_key(rt), NULL,
rt_mask(rt), rt->rt_flags, NULL, rt->rt_fibnum);
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt_setgate(struct rtentry *rt, struct sockaddr *dst, struct sockaddr *gate)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
/* XXX dst may be overwritten, can we move this to below */
Wrap a line that became too long with the addition of V_. (This file contains many more unwrapped or badly wrapped lines.)
2008-09-01 17:15:29 +00:00
struct radix_node_head *rnh =
V_rt_tables[rt->rt_fibnum][dst->sa_family];
route.h: introduce a macro, SA_SIZE(struct sockaddr *) which returns the space occupied by a struct sockaddr when passed through a routing socket. Use it to replace the macro ROUNDUP(int), that does the same but is redefined by every file which uses it, courtesy of the School of Cut'n'Paste Programming(TM). (partial) userland changes to follow.
2004-04-13 11:22:22 +00:00
int dlen = SA_SIZE(dst), glen = SA_SIZE(gate);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
Add a workaround for a deadlock between the rt_setgate() and rt_check() functions. It is easily triggered by running routed, and, I expect, by running any other daemon that uses routing sockets. Reviewed by: net@ MFC after: 1 week
2007-12-27 10:00:57 +00:00
again:
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RT_LOCK_ASSERT(rt);
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
RADIX_NODE_HEAD_LOCK_ASSERT(rnh);
Disallow host routes that point to themselves. These routes serve no purpose, other than to get in the way of the ARP table and cause "can't allocate llinfo" errors. This change may cause gated or routed to start complaining when adding such routes. If so, these programs will need to be fixed to not try to add these routes. Reviewed by: wollman
1996-07-10 01:34:36 +00:00
/*
* A host route with the destination equal to the gateway
* will interfere with keeping LLINFO in the routing
* table, so disallow it.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (((rt->rt_flags & (RTF_HOST|RTF_GATEWAY|RTF_LLINFO)) ==
Disallow host routes that point to themselves. These routes serve no purpose, other than to get in the way of the ARP table and cause "can't allocate llinfo" errors. This change may cause gated or routed to start complaining when adding such routes. If so, these programs will need to be fixed to not try to add these routes. Reviewed by: wollman
1996-07-10 01:34:36 +00:00
(RTF_HOST|RTF_GATEWAY)) &&
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
dst->sa_len == gate->sa_len &&
bcmp(dst, gate, dst->sa_len) == 0) {
Disallow host routes that point to themselves. These routes serve no purpose, other than to get in the way of the ARP table and cause "can't allocate llinfo" errors. This change may cause gated or routed to start complaining when adding such routes. If so, these programs will need to be fixed to not try to add these routes. Reviewed by: wollman
1996-07-10 01:34:36 +00:00
/*
* The route might already exist if this is an RTM_CHANGE
* or a routing redirect, so try to delete it.
*/
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
if (rt_key(rt))
Overhaul routing table entry cleanup by introducing a new rtexpunge routine that takes a locked routing table reference and removes all references to the entry in the various data structures. This eliminates instances of recursive locking and also closes races where the lock on the entry had to be dropped prior to calling rtrequest(RTM_DELETE). This also cleans up confusion where the caller held a reference to an entry that might have been reclaimed (and in some cases used that reference). Supported by: FreeBSD Foundation
2003-10-30 23:02:51 +00:00
rtexpunge(rt);
Disallow host routes that point to themselves. These routes serve no purpose, other than to get in the way of the ARP table and cause "can't allocate llinfo" errors. This change may cause gated or routed to start complaining when adding such routes. If so, these programs will need to be fixed to not try to add these routes. Reviewed by: wollman
1996-07-10 01:34:36 +00:00
return EADDRNOTAVAIL;
}
Several fixes to rt_setgate(), that fix problems with route changing: - Rearrange code so that in a case of failure the affected route is not changed. Otherwise, a bogus rtentry will be left and later rt_check() can recurse on its lock. [1] - Remove comment about protocol cloning. - Fix two places where rtentry mutex was recursed on, because accessed via two different pointers, that were actually pointing to the same rtentry in some cases. [1] - Return EADDRINUSE instead of bogus EDQUOT, in case when gateway uses the same route. [2] Reported & tested by: ps, Andrej Zverev <az inec.ru> [1] PR: kern/64090 [2]
2005-09-21 11:58:10 +00:00
/*
* Cloning loop avoidance in case of bad configuration.
*/
if (rt->rt_flags & RTF_GATEWAY) {
struct rtentry *gwrt;
RT_UNLOCK(rt); /* XXX workaround LOR */
- convert radix node head lock from mutex to rwlock - make radix node head lock not recursive - fix LOR in rtexpunge - fix LOR in rtredirect Reviewed by: sam
2008-12-07 21:15:43 +00:00
gwrt = rtalloc1_fib(gate, 1, RTF_RNH_LOCKED, rt->rt_fibnum);
Several fixes to rt_setgate(), that fix problems with route changing: - Rearrange code so that in a case of failure the affected route is not changed. Otherwise, a bogus rtentry will be left and later rt_check() can recurse on its lock. [1] - Remove comment about protocol cloning. - Fix two places where rtentry mutex was recursed on, because accessed via two different pointers, that were actually pointing to the same rtentry in some cases. [1] - Return EADDRINUSE instead of bogus EDQUOT, in case when gateway uses the same route. [2] Reported & tested by: ps, Andrej Zverev <az inec.ru> [1] PR: kern/64090 [2]
2005-09-21 11:58:10 +00:00
if (gwrt == rt) {
RT_REMREF(rt);
return (EADDRINUSE); /* failure */
}
Add a workaround for a deadlock between the rt_setgate() and rt_check() functions. It is easily triggered by running routed, and, I expect, by running any other daemon that uses routing sockets. Reviewed by: net@ MFC after: 1 week
2007-12-27 10:00:57 +00:00
/*
* Try to reacquire the lock on rt, and if it fails,
* clean state and restart from scratch.
*/
if (!RT_TRYLOCK(rt)) {
RTFREE_LOCKED(gwrt);
RT_LOCK(rt);
goto again;
}
Several fixes to rt_setgate(), that fix problems with route changing: - Rearrange code so that in a case of failure the affected route is not changed. Otherwise, a bogus rtentry will be left and later rt_check() can recurse on its lock. [1] - Remove comment about protocol cloning. - Fix two places where rtentry mutex was recursed on, because accessed via two different pointers, that were actually pointing to the same rtentry in some cases. [1] - Return EADDRINUSE instead of bogus EDQUOT, in case when gateway uses the same route. [2] Reported & tested by: ps, Andrej Zverev <az inec.ru> [1] PR: kern/64090 [2]
2005-09-21 11:58:10 +00:00
/*
* If there is already a gwroute, then drop it. If we
* are asked to replace route with itself, then do
* not leak its refcounter.
*/
if (rt->rt_gwroute != NULL) {
if (rt->rt_gwroute == gwrt) {
RT_REMREF(rt->rt_gwroute);
} else
RTFREE(rt->rt_gwroute);
}
if ((rt->rt_gwroute = gwrt) != NULL)
RT_UNLOCK(rt->rt_gwroute);
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
* Prepare to store the gateway in rt->rt_gateway.
* Both dst and gateway are stored one after the other in the same
* malloc'd chunk. If we have room, we can reuse the old buffer,
* rt_gateway already points to the right place.
* Otherwise, malloc a new block and update the 'dst' address.
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (rt->rt_gateway == NULL || glen > SA_SIZE(rt->rt_gateway)) {
caddr_t new;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
R_Malloc(new, caddr_t, dlen + glen);
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
if (new == NULL)
Disallow host routes that point to themselves. These routes serve no purpose, other than to get in the way of the ARP table and cause "can't allocate llinfo" errors. This change may cause gated or routed to start complaining when adding such routes. If so, these programs will need to be fixed to not try to add these routes. Reviewed by: wollman
1996-07-10 01:34:36 +00:00
return ENOBUFS;
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
* XXX note, we copy from *dst and not *rt_key(rt) because
* rt_setgate() can be called to initialize a newly
* allocated route entry, in which case rt_key(rt) == NULL
* (and also rt->rt_gateway == NULL).
* Free()/free() handle a NULL argument just fine.
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
bcopy(dst, new, dlen);
Free(rt_key(rt)); /* free old block, if any */
Avoid casts as lvalues.
2004-07-28 06:59:55 +00:00
rt_key(rt) = (struct sockaddr *)new;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
rt->rt_gateway = (struct sockaddr *)(new + dlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
/*
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
* Copy the new gateway value into the memory chunk.
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
*/
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
bcopy(gate, rt->rt_gateway, glen);
add a bunch of comments to describe what's going on. This is some of the worst code I've had to wade through in ages and I don't want to have to start from scratch again next time. (I have a 2.2 version of these comments, can I commit them?)
1997-03-05 08:01:28 +00:00
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
/*
* This isn't going to do anything useful for host routes, so
* don't bother. Also make sure we have a reasonable mask
* (we don't yet have one during adds).
*/
if (!(rt->rt_flags & RTF_HOST) && rt_mask(rt) != 0) {
struct rtfc_arg arg;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
arg.rnh = rnh;
arg.rt0 = rt;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
rnh->rnh_walktree_from(rnh, rt_key(rt), rt_mask(rt),
Finally finish the cloning cleanup work by making sure that clones go away whenever a clone's parent is changed, or a route is added in a certain set of circumstances. This also includes code to forbid setting a route's gateway to an address which can only be reached through that route, thus (hopefully) eliminating one class of cloning bottomless-recursion bugs.
1995-04-25 19:12:07 +00:00
rt_fixchange, &arg);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return 0;
}
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt_maskedcopy(struct sockaddr *src, struct sockaddr *dst, struct sockaddr *netmask)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
register u_char *cp1 = (u_char *)src;
register u_char *cp2 = (u_char *)dst;
register u_char *cp3 = (u_char *)netmask;
u_char *cplim = cp2 + *cp3;
u_char *cplim2 = cp2 + *cp1;
*cp2++ = *cp1++; *cp2++ = *cp1++; /* copies sa_len & sa_family */
cp3 += 2;
if (cplim > cplim2)
cplim = cplim2;
while (cp2 < cplim)
*cp2++ = *cp1++ & *cp3++;
if (cp2 < cplim2)
bzero((caddr_t)cp2, (unsigned)(cplim2 - cp2));
}
/*
* Set up a routing table entry, normally
* for an interface.
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
#define _SOCKADDR_TMPSIZE 128 /* Not too big.. kernel stack size is limited */
static inline int
rtinit1(struct ifaddr *ifa, int cmd, int flags, int fibnum)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
INIT_VNET_NET(curvnet);
in rtinit(), remove one useless variable, and move a few others within the block where they are used.
2004-04-12 20:24:30 +00:00
struct sockaddr *dst;
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
struct sockaddr *netmask;
Fix the initial check for NULL arguments in rtfree (previously it checked for rt == NULL after dereferencing the pointer). We never check for those events elsewhere, so probably these checks might go away here as well. Slightly simplify (and document) the logic for memory allocation in rt_setgate(). The rest is mostly style changes -- replace 0 with NULL where appropriate, remove the macro SA() that was only used once, remove some useless debugging code in rt_fixchange, explain some odd-looking casts.
2004-04-20 07:04:47 +00:00
struct rtentry *rt = NULL;
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
struct rt_addrinfo info;
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
int error = 0;
int startfib, endfib;
char tempbuf[_SOCKADDR_TMPSIZE];
int didwork = 0;
int a_failure = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
if (flags & RTF_HOST) {
dst = ifa->ifa_dstaddr;
netmask = NULL;
} else {
dst = ifa->ifa_addr;
netmask = ifa->ifa_netmask;
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
if ( dst->sa_family != AF_INET)
fibnum = 0;
if (fibnum == -1) {
Add the ability to add new addresses for interfacesto just one FIB (Other more specific related options will follow) This allows one to set multiple p2p links to the same place and select which to use by having each in different FIBS.
2008-07-27 01:29:28 +00:00
if (rt_add_addr_allfibs == 0 && cmd == (int)RTM_ADD) {
startfib = endfib = curthread->td_proc->p_fibnum;
} else {
startfib = 0;
endfib = rt_numfibs - 1;
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
} else {
KASSERT((fibnum < rt_numfibs), ("rtinit1: bad fibnum"));
startfib = fibnum;
endfib = fibnum;
}
In rtrequest and rtinit check for sa_len != 0 for the given destination. These checks are needed so we do not install a route looking like this: (0) 192.0.2.200 UH tun0 => When removing this route the kernel will start to walk the address space which looks like a hang on 64bit platforms because it'll take ages while on 32bit you should see a panic when kernel debugging options are turned on. The problem is in rtrequest1: if (netmask) { rt_maskedcopy(dst, ndst, netmask); } else bcopy(dst, ndst, dst->sa_len); In both cases the len might be 0 if the application forgot to set it. If so ndst will be all-zero leading to above mentioned strange routes. This is an application error but we must not fail/hang/panic because of this. Looks ok: gnn No objections: net@ (silence) MFC after: 8 weeks
2006-05-04 18:33:37 +00:00
if (dst->sa_len == 0)
return(EINVAL);
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
* If it's a delete, check that if it exists,
* it's on the correct interface or we might scrub
* a route to another ifa which would
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
* be confusing at best and possibly worse.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (cmd == RTM_DELETE) {
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
* It's a delete, so it should already exist..
* If it's a net, mask off the host bits
* (Assuming we have a mask)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
* XXX this is kinda inet specific..
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2. Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *'' as the argument. Pass rt_addrinfo all the way down to rtrequest1 and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now ``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is using it anyways). Benefit: the following command now works. Previously we needed two route(8) invocations, "add" then "change". # route add -inet6 default ::1 -ifp gif0 Remove unsafe typecast in rtrequest(), from ``rtentry *'' to ``sockaddr *''. It was introduced by 4.3BSD-Reno and never corrected. Obtained from: BSD/OS, NetBSD MFC after: 1 month PR: kern/28360
2001-10-17 18:07:05 +00:00
if (netmask != NULL) {
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rt_maskedcopy(dst, (struct sockaddr *)tempbuf, netmask);
dst = (struct sockaddr *)tempbuf;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
}
/*
* Now go through all the requested tables (fibs) and do the
* requested action. Realistically, this will either be fib 0
* for protocols that don't do multiple tables or all the
* tables for those that do. XXX For this version only AF_INET.
* When that changes code should be refactored to protocol
* independent parts and protocol dependent parts.
*/
for ( fibnum = startfib; fibnum <= endfib; fibnum++) {
if (cmd == RTM_DELETE) {
struct radix_node_head *rnh;
struct radix_node *rn;
/*
* Look up an rtentry that is in the routing tree and
* contains the correct info.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if ((rnh = V_rt_tables[fibnum][dst->sa_family]) == NULL)
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
/* this table doesn't exist but others might */
continue;
RADIX_NODE_HEAD_LOCK(rnh);
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
if (rn_mpath_capable(rnh)) {
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rn = rnh->rnh_matchaddr(dst, rnh);
if (rn == NULL)
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
error = ESRCH;
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
else {
rt = RNTORT(rn);
/*
* for interface route the
* rt->rt_gateway is sockaddr_intf
* for cloning ARP entries, so
* rt_mpath_matchgate must use the
* interface address
*/
rt = rt_mpath_matchgate(rt,
ifa->ifa_addr);
if (!rt)
error = ESRCH;
}
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
else
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#endif
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
rn = rnh->rnh_lookup(dst, netmask, rnh);
error = (rn == NULL ||
(rn->rn_flags & RNF_ROOT) ||
RNTORT(rn)->rt_ifa != ifa ||
!sa_equal((struct sockaddr *)rn->rn_key, dst));
RADIX_NODE_HEAD_UNLOCK(rnh);
if (error) {
/* this is only an error if bad on ALL tables */
continue;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
/*
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
* Do the actual request
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
bzero((caddr_t)&info, sizeof(info));
info.rti_ifa = ifa;
info.rti_flags = flags | ifa->ifa_flags;
info.rti_info[RTAX_DST] = dst;
info.rti_info[RTAX_GATEWAY] = ifa->ifa_addr;
info.rti_info[RTAX_NETMASK] = netmask;
error = rtrequest1_fib(cmd, &info, &rt, fibnum);
if (error == 0 && rt != NULL) {
/*
* notify any listening routing agents of the change
*/
RT_LOCK(rt);
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
/*
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
* in case address alias finds the first address
* e.g. ifconfig bge0 192.103.54.246/24
* e.g. ifconfig bge0 192.103.54.247/24
* the address set in the route is 192.103.54.246
* so we need to replace it with 192.103.54.247
No code changes what so ever, but added about 150 lines of comments Sorry if this makes it harder to merge in lite2 stuff but hey.. At least I can figure out what is going on whenever I end up going through those files again.. do we have a policy regarding commenting existing code?
1996-09-10 07:10:05 +00:00
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
if (memcmp(rt->rt_ifa->ifa_addr,
ifa->ifa_addr, ifa->ifa_addr->sa_len)) {
IFAFREE(rt->rt_ifa);
IFAREF(ifa);
rt->rt_ifp = ifa->ifa_ifp;
rt->rt_ifa = ifa;
}
#endif
rt_newaddrmsg(cmd, ifa, error, rt);
if (cmd == RTM_DELETE) {
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
/*
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
* If we are deleting, and we found an entry,
* then it's been removed from the tree..
* now throw it away.
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
*/
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
RTFREE_LOCKED(rt);
} else {
if (cmd == RTM_ADD) {
/*
* We just wanted to add it..
* we don't actually need a reference.
*/
RT_REMREF(rt);
}
RT_UNLOCK(rt);
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
}
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
didwork = 1;
}
if (error)
a_failure = error;
}
if (cmd == RTM_DELETE) {
if (didwork) {
error = 0;
} else {
/* we only give an error if it wasn't in any table */
error = ((flags & RTF_HOST) ?
EHOSTUNREACH : ENETUNREACH);
}
} else {
if (a_failure) {
/* return an error if any of them failed */
error = a_failure;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
}
Added back the missing last few bytes of the file.
1995-01-23 17:53:21 +00:00
return (error);
}
Postpone route_init() until all domains are attached.
1999-04-29 03:22:19 +00:00
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
/* special one for inet internal use. may not use. */
int
rtinit_fib(struct ifaddr *ifa, int cmd, int flags)
{
return (rtinit1(ifa, cmd, flags, -1));
}
/*
* Set up a routing table entry, normally
* for an interface.
*/
int
rtinit(struct ifaddr *ifa, int cmd, int flags)
{
struct sockaddr *dst;
int fib = 0;
if (flags & RTF_HOST) {
dst = ifa->ifa_dstaddr;
} else {
dst = ifa->ifa_addr;
}
if (dst->sa_family == AF_INET)
fib = -1;
return (rtinit1(ifa, cmd, flags, fib));
}
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
/*
Correct and extend the description of the behaviour of rt_check().
2004-04-24 23:34:56 +00:00
* rt_check() is invoked on each layer 2 output path, prior to
* encapsulating outbound packets.
*
* The function is mostly used to find a routing entry for the gateway,
* which in some protocol families could also point to the link-level
* address for the gateway itself (the side effect of revalidating the
* route to the destination is rather pointless at this stage, we did it
* already a moment before in the pr_output() routine to locate the ifp
* and gateway to use).
*
* When we remove the layer-3 to layer-2 mapping tables from the
* routing table, this function can be removed.
*
* === On input ===
* *dst is the address of the NEXT HOP (which coincides with the
* final destination if directly reachable);
* *lrt0 points to the cached route to the final destination;
* *lrt is not meaningful;
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
* (*lrt0 has no ref held on it by us so REMREF is not needed.
* Refs only account for major structural references and not usages,
* which is actually a bit of a problem.)
Correct and extend the description of the behaviour of rt_check().
2004-04-24 23:34:56 +00:00
*
* === Operation ===
* If the route is marked down try to find a new route. If the route
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
* to the gateway is gone, try to setup a new route. Otherwise,
* if the route is marked for packets to be rejected, enforce that.
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
* Note that rtalloc returns an rtentry with an extra REF that we may
* need to lose.
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
*
Correct and extend the description of the behaviour of rt_check().
2004-04-24 23:34:56 +00:00
* === On return ===
* *dst is unchanged;
* *lrt0 points to the (possibly new) route to the final destination
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
* *lrt points to the route to the next hop [LOCKED]
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
*
fix one typo and remove one wrong line
2004-04-25 01:39:00 +00:00
* Their values are meaningful ONLY if no error is returned.
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
*
* To follow this you have to remember that:
* RT_REMREF reduces the reference count by 1 but doesn't check it for 0 (!)
* RTFREE_LOCKED includes an RT_REMREF (or an rtfree if refs == 1)
* and an RT_UNLOCK
* RTFREE does an RT_LOCK and an RTFREE_LOCKED
* The gwroute pointer counts as a reference on the rtentry to which it points.
* so when we add it we use the ref that rtalloc gives us and when we lose it
* we need to remove the reference.
* RT_TEMP_UNLOCK does an RT_ADDREF before freeing the lock, and
* RT_RELOCK locks it (it can't have gone away due to the ref) and
* drops the ref, possibly freeing it and zeroing the pointer if
* the ref goes to 0 (unlocking in the process).
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
*/
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
int
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
rt_check(struct rtentry **lrt, struct rtentry **lrt0, struct sockaddr *dst)
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
{
struct rtentry *rt;
struct rtentry *rt0;
Revert a part of the MRT commit that proved un-needed. rt_check() in its original form proved to be sufficient and rt_check_fib() can go away (as can its evil twin in_rt_check()). I believe this does NOT address the crashes people have been seeing in rt_check. MFC after: 1 week
2008-09-14 08:19:48 +00:00
u_int fibnum;
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
KASSERT(*lrt0 != NULL, ("rt_check"));
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
rt0 = *lrt0;
rt = NULL;
Hey, committed the same typo twice! must be a record
2008-09-15 07:23:56 +00:00
fibnum = rt0->rt_fibnum;
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
/* NB: the locking here is tortuous... */
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
RT_LOCK(rt0);
retry:
if (rt0 && (rt0->rt_flags & RTF_UP) == 0) {
/* Current rt0 is useless, try get a replacement. */
RT_UNLOCK(rt0);
rt0 = NULL;
}
if (rt0 == NULL) {
rt0 = rtalloc1_fib(dst, 1, 0UL, fibnum);
if (rt0 == NULL) {
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
return (EHOSTUNREACH);
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
}
RT_REMREF(rt0); /* don't need the reference. */
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
}
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
if (rt0->rt_flags & RTF_GATEWAY) {
if ((rt = rt0->rt_gwroute) != NULL) {
RT_LOCK(rt); /* NB: gwroute */
if ((rt->rt_flags & RTF_UP) == 0) {
/* gw route is dud. ignore/lose it */
RTFREE_LOCKED(rt); /* unref (&unlock) gwroute */
rt = rt0->rt_gwroute = NULL;
}
}
if (rt == NULL) { /* NOT AN ELSE CLAUSE */
RT_TEMP_UNLOCK(rt0); /* MUST return to undo this */
rt = rtalloc1_fib(rt0->rt_gateway, 1, 0UL, fibnum);
if ((rt == rt0) || (rt == NULL)) {
/* the best we can do is not good enough */
if (rt) {
RT_REMREF(rt); /* assumes ref > 0 */
RT_UNLOCK(rt);
}
RTFREE(rt0); /* lock, unref, (unlock) */
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
return (ENETUNREACH);
Assuming the interface has an address of x.x.x.195, a mask of 255.255.255.0, and a default route with gateway x.x.x.1. Now if the address mask is changed to something more specific, e.g., 255.255.255.128, then after the mask change the default gateway is no longer reachable. Since the default route is still present in the routing table, when the output code tries to resolve the address of the default gateway in function rt_check(), again, the default route will be returned by rtalloc1(). Because the lock is currently held on the rtentry structure, one more attempt to hold the lock will trigger a crash due to "lock recursed on non-recursive mutex ..." This is a general problem. The fix checks for the above condition so that an existing route entry is not mistaken for a new cloned route. Approriately, an ENETUNREACH error is returned back to the caller Approved by: andre
2006-06-05 21:20:21 +00:00
}
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
/*
* Relock it and lose the added reference.
* All sorts of things could have happenned while we
* had no lock on it, so check for them.
*/
RT_RELOCK(rt0);
if (rt0 == NULL || ((rt0->rt_flags & RTF_UP) == 0))
/* Ru-roh.. what we had is no longer any good */
goto retry;
/*
* While we were away, someone replaced the gateway.
* Since a reference count is involved we can't just
* overwrite it.
*/
if (rt0->rt_gwroute) {
if (rt0->rt_gwroute != rt) {
RTFREE_LOCKED(rt);
goto retry;
}
} else {
rt0->rt_gwroute = rt;
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
}
In preparation for fixing races in ARP (and probably in other L2/L3 mappings) make rt_check() return a locked rtentry.
2005-08-09 08:39:56 +00:00
}
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
RT_LOCK_ASSERT(rt);
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
RT_UNLOCK(rt0);
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
} else {
/* think of rt as having the lock from now on.. */
rt = rt0;
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
}
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
/* XXX why are we inspecting rmx_expire? */
rewrite rt_check. Ztake into account that whiel teh rtentry is unlocked, someone else might change it, so after we re-acquire the lock on it, we need to check it is still valid. People have been panicing in this function due to soem edge cases which I have hopefully removed. Reviewed by: keramida @ Obtained from: 1 week
2008-09-15 04:14:53 +00:00
if ((rt->rt_flags & RTF_REJECT) &&
(rt->rt_rmx.rmx_expire == 0 ||
time_uptime < rt->rt_rmx.rmx_expire)) {
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
RT_UNLOCK(rt);
Some minor cleanups: - In rt_check() remove the senderr() macro and the "bad" label. They used to simplify code, but now aren't. - Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro does this. - In rtfree() convert panics to KASSERTs. - Strict the routing API: rtfree() should be called only in a case when we are completely sure we've got the last reference on the rtentry. In all other cases RTFREE_LOCKED() macro should be used. If the reference isn't the last one spit out a warning printf. Correct the only(?) case for this in rt_check(). - Fix typos in comments.
2007-05-22 16:17:31 +00:00
return (rt == rt0 ? EHOSTDOWN : EHOSTUNREACH);
o Make rt_check() function more strict: - rt0 passed to rt_check() must not be NULL, assert this. - rt returned by rt_check() must be valid locked rtentry, if no error occured. o Modify callers, so that they never pass NULL rt0 to rt_check(). Reviewed by: sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
}
In preparation for fixing races in ARP (and probably in other L2/L3 mappings) make rt_check() return a locked rtentry.
2005-08-09 08:39:56 +00:00
*lrt = rt;
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
*lrt0 = rt0;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
return (0);
Reduce code duplication. This adds the function rt_check() to route.c. Approved by: sam (in principle)
2003-03-02 21:34:37 +00:00
}
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
/* This must be before ip6_init2(), which is now SI_ORDER_MIDDLE */
SYSINIT(route, SI_SUB_PROTO_DOMAIN, SI_ORDER_THIRD, route_init, 0);
Reference in New Issue Copy Permalink