freebsd-skq/usr.sbin/devctl/devctl.c

367 lines
7.4 KiB
C
Raw Normal View History

Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
/*-
* Copyright (c) 2014 John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/linker_set.h>
#include <devctl.h>
#include <err.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
struct devctl_command {
const char *name;
int (*handler)(int ac, char **av);
};
#define DEVCTL_DATASET(name) devctl_ ## name ## _table
#define DEVCTL_COMMAND(set, name, function) \
static struct devctl_command function ## _devctl_command = \
{ #name, function }; \
DATA_SET(DEVCTL_DATASET(set), function ## _devctl_command)
#define DEVCTL_TABLE(set, name) \
SET_DECLARE(DEVCTL_DATASET(name), struct devctl_command); \
\
static int \
devctl_ ## name ## _table_handler(int ac, char **av) \
{ \
return (devctl_table_handler(SET_BEGIN(DEVCTL_DATASET(name)), \
SET_LIMIT(DEVCTL_DATASET(name)), ac, av)); \
} \
DEVCTL_COMMAND(set, name, devctl_ ## name ## _table_handler)
static int devctl_table_handler(struct devctl_command **start,
struct devctl_command **end, int ac, char **av);
SET_DECLARE(DEVCTL_DATASET(top), struct devctl_command);
DEVCTL_TABLE(top, clear);
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
DEVCTL_TABLE(top, set);
static void
usage(void)
{
fprintf(stderr, "%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n",
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
"usage: devctl attach device",
" devctl detach [-f] device",
" devctl disable [-f] device",
" devctl enable device",
" devctl suspend device",
" devctl resume device",
" devctl set driver [-f] device driver",
" devctl clear driver [-f] device",
" devctl rescan device",
" devctl delete [-f] device");
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
exit(1);
}
static int
devctl_table_handler(struct devctl_command **start,
struct devctl_command **end, int ac, char **av)
{
struct devctl_command **cmd;
if (ac < 2) {
warnx("The %s command requires a sub-command.", av[0]);
return (EINVAL);
}
for (cmd = start; cmd < end; cmd++) {
if (strcmp((*cmd)->name, av[1]) == 0)
return ((*cmd)->handler(ac - 1, av + 1));
}
warnx("%s is not a valid sub-command of %s.", av[1], av[0]);
return (ENOENT);
}
static int
help(int ac __unused, char **av __unused)
{
usage();
return (0);
}
DEVCTL_COMMAND(top, help, help);
static int
attach(int ac, char **av)
{
if (ac != 2)
usage();
if (devctl_attach(av[1]) < 0)
err(1, "Failed to attach %s", av[1]);
return (0);
}
DEVCTL_COMMAND(top, attach, attach);
static void
detach_usage(void)
{
fprintf(stderr, "usage: devctl detach [-f] device\n");
exit(1);
}
static int
detach(int ac, char **av)
{
bool force;
int ch;
force = false;
while ((ch = getopt(ac, av, "f")) != -1)
switch (ch) {
case 'f':
force = true;
break;
default:
detach_usage();
}
ac -= optind;
av += optind;
if (ac != 1)
detach_usage();
if (devctl_detach(av[0], force) < 0)
err(1, "Failed to detach %s", av[0]);
return (0);
}
DEVCTL_COMMAND(top, detach, detach);
static void
disable_usage(void)
{
fprintf(stderr, "usage: devctl disable [-f] device\n");
exit(1);
}
static int
disable(int ac, char **av)
{
bool force;
int ch;
force = false;
while ((ch = getopt(ac, av, "f")) != -1)
switch (ch) {
case 'f':
force = true;
break;
default:
disable_usage();
}
ac -= optind;
av += optind;
if (ac != 1)
disable_usage();
if (devctl_disable(av[0], force) < 0)
err(1, "Failed to disable %s", av[0]);
return (0);
}
DEVCTL_COMMAND(top, disable, disable);
static int
enable(int ac, char **av)
{
if (ac != 2)
usage();
if (devctl_enable(av[1]) < 0)
err(1, "Failed to enable %s", av[1]);
return (0);
}
DEVCTL_COMMAND(top, enable, enable);
static int
suspend(int ac, char **av)
{
if (ac != 2)
usage();
if (devctl_suspend(av[1]) < 0)
err(1, "Failed to suspend %s", av[1]);
return (0);
}
DEVCTL_COMMAND(top, suspend, suspend);
static int
resume(int ac, char **av)
{
if (ac != 2)
usage();
if (devctl_resume(av[1]) < 0)
err(1, "Failed to resume %s", av[1]);
return (0);
}
DEVCTL_COMMAND(top, resume, resume);
static void
set_driver_usage(void)
{
fprintf(stderr, "usage: devctl set driver [-f] device driver\n");
exit(1);
}
static int
set_driver(int ac, char **av)
{
bool force;
int ch;
force = false;
while ((ch = getopt(ac, av, "f")) != -1)
switch (ch) {
case 'f':
force = true;
break;
default:
set_driver_usage();
}
ac -= optind;
av += optind;
if (ac != 2)
set_driver_usage();
if (devctl_set_driver(av[0], av[1], force) < 0)
err(1, "Failed to set %s driver to %s", av[0], av[1]);
return (0);
}
DEVCTL_COMMAND(set, driver, set_driver);
static void
clear_driver_usage(void)
{
fprintf(stderr, "usage: devctl clear driver [-f] device\n");
exit(1);
}
static int
clear_driver(int ac, char **av)
{
bool force;
int ch;
force = false;
while ((ch = getopt(ac, av, "f")) != -1)
switch (ch) {
case 'f':
force = true;
break;
default:
clear_driver_usage();
}
ac -= optind;
av += optind;
if (ac != 1)
clear_driver_usage();
if (devctl_clear_driver(av[0], force) < 0)
err(1, "Failed to clear %s driver", av[0]);
return (0);
}
DEVCTL_COMMAND(clear, driver, clear_driver);
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
static int
rescan(int ac, char **av)
{
if (ac != 2)
usage();
if (devctl_rescan(av[1]) < 0)
err(1, "Failed to rescan %s", av[1]);
return (0);
}
DEVCTL_COMMAND(top, rescan, rescan);
static void
delete_usage(void)
{
fprintf(stderr, "usage: devctl delete [-f] device\n");
exit(1);
}
static int
delete(int ac, char **av)
{
bool force;
int ch;
force = false;
while ((ch = getopt(ac, av, "f")) != -1)
switch (ch) {
case 'f':
force = true;
break;
default:
delete_usage();
}
ac -= optind;
av += optind;
if (ac != 1)
delete_usage();
if (devctl_delete(av[0], force) < 0)
err(1, "Failed to delete %s", av[0]);
return (0);
}
DEVCTL_COMMAND(top, delete, delete);
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
int
main(int ac, char *av[])
{
struct devctl_command **cmd;
if (ac == 1)
usage();
ac--;
av++;
SET_FOREACH(cmd, DEVCTL_DATASET(top)) {
if (strcmp((*cmd)->name, av[0]) == 0) {
if ((*cmd)->handler(ac, av) != 0)
return (1);
else
return (0);
}
}
warnx("Unknown command %s.", av[0]);
return (1);
}