freebsd-skq/etc/sysconfig

#!/bin/sh
#

# This is sysconfig - a file full of useful variables that you can set 
# to change the default startup behavior of your system.
#
#	$Id: sysconfig,v 1.9 1995/04/04 17:34:40 ache Exp $

######################### Start Of Syscons Section #######################

# Choose keyboard map from /usr/share/syscons/keymaps/* or NO if default.
keymap=NO

# Set keyboard rate to: slow, normal, fast or NO if default.
keyrate=NO

# Change function keys default values (or no change if NO)
# Syntax: "<funkey_number> <new_value> [<funkey_number> <new_value>]..."
keychange=NO

# Desired cursor type {normal|blink|destructive}, NO if no change
cursor=NO

# Choose screen map from /usr/share/syscons/scrnmaps/* (or NO for none)
scrnmap=NO

# Choose font 8x16 from /usr/share/syscons/fonts/* (or NO for default)
font8x16=NO

# Choose font 8x14 from /usr/share/syscons/fonts/* (or NO for default)
font8x14=NO

# Choose font 8x8 from /usr/share/syscons/fonts/* (or NO for default)
font8x8=NO

# Set blank time (in seconds) or "off" to turn it off (or NO for default)
blanktime=NO

# Set to screen saver desired: blank, green, snake, star (or NO for none)
saver=NO

# General russian setup for example:
# (koi8-r keyboard with cp866 screen font mapped to koi8-r)
#
# keymap=ru.koi8-r
# keyrate=fast
# keychange="61 "
# cursor=destructive
# scrnmap=koi8-r2cp866
# font8x16=cp866b-8x16
# font8x14=cp866-8x14
# font8x8=cp866-8x8
# blanktime=600
# saver=snake

######################### End Of Syscons Section #######################

######################### Start Of Netconfig Section #######################

# Set to the name of your host - this is pretty important!
hostname=myname.my.domain

# Set to the list of network devices on this host.  You must have an
# ifconfig_${network_interface} line for each interface listed here.
# for example:
#network_interfaces="ed0 sl0"

# Set one for each network device listed in network_interfaces above.
# for example:
#ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00"
#ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00"

# Set to the host you'd like set as your default router, or NO of none.
defaultrouter=NO

# These are the flags you'd like to start the routing daemon with
routedflags=-q

# timed flags, or NO if you don't want to start the time daemon
timedflags=NO

# xntpd flags, or NO if you don't want to start the xntpd daemon
xntpdflags="NO"
tickadj="-Aq"	# this is inoperative unless xntpd is enabled; NO to disable

# Set to the site you'd like to syncronize your clock from (gatekeeper.dec.com,
# for example) or NO for no such site.
ntpdate="NO"

# Set to YES if you want to run rwhod
rwhod=NO

# Default sendmail flags.  -bd is pretty mandatory, -q<n>m sets the queue scan
# time in minutes.  If set to NO, don't start sendmail at all.
sendmail_flags="-bd -q30m"

# Set to appropriate flags if you want to use AMD
amdflags="NO"

# Set to YES if this machine will be an NFS client
nfs_client=NO

# Set to YES if this machine will be an NFS server
nfs_server=NO

# Set to appropriate flags if you want to start NIS for a client
nis_clientflags="NO"

# Set to appropriate flags if you want to start NIS for a server
nis_serverflags="NO"

# Set to appropriate flags for yppasswdd, if you wish to run it.
# Typical flags might be "-m /var/yp/master.passwd -s -f"
yppasswddflags="NO"

# Set to appropriate flags for named, if you have a full-time
# connection to the Internet.
# For most hosts, flags should be "-b /etc/namedb/named.boot"
namedflags="NO"

# Set to YES if you want to run the X-10 power controller daemon
xtend=NO

# Set to YES if you want kernel crashdumps to be saved for debugging
savecore=NO

# Set to YES if you want to run Kerberos authentication
kerberos_server=NO

# Set to YES if you want to run gated
gated=NO

# Set to YES if you wish to check quotas.  NOTE:  For now this probably
# doesn't work and should be left disabled.
check_quotas=NO

# Set to YES to turn on accounting.  NOTE: For now this probably
# doesn't work and should be left disabled.
accounting=NO


# This stuff needed for proper daemons tuning, comsat f.e.
# See profile and csh.login also.
# Uncomment next line if you want to setup your 8-bit locale at program
# startup automatically
# ENABLE_STARTUP_LOCALE=; export ENABLE_STARTUP_LOCALE
# Uncomment next line to activate russian locale
# LANG=ru_SU.KOI8-R; export LANG
# Uncomment next line to activate italian locale
# LANG=it_IT.ISO8859-1; export LANG
# For full list of locales, check /usr/share/locale/*

######################### End Of Netconfig Section #######################

######################### Start Of Misc Section #######################

# Set to YES if you want ibcs2 (SCO) emulation loaded at startup
ibcs2=NO