d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
23e124c78b
freebsd-skq/sys/conf/options.arm

54 lines
1.4 KiB
Plaintext
Raw Normal View History

Add config magic for arm.
2004-05-14 11:49:40 +00:00
#$FreeBSD$
Add ARMV6 as an arm option. This will cause obscure magic in config(8) to automatically set the armv6 option when MACHINE_ARCH is armv6. That allows replacing ever-growing lists of cpu names as options to compile a given file with the using either "optional armv6" or "optional !armv6".
2014-11-24 00:02:15 +00:00
ARMV6 opt_global.h
Tag all armv7 kernels as such in their machine config line. Transition all boards that support arm cortex CPUs to armv7. This leaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835 which has a ARM1176 core, and VERSATILEPB, which is a qemu board setup around the time RPI-B went in. Copy std.armv6 to std.armv7, even though that duplicates a lot of stuff. More work needs to be done to sort out the duplication. Differential Revision: https://reviews.freebsd.org/D12027
2017-10-05 23:01:50 +00:00
ARMV7 opt_global.h
Add the etherswitch(4) support for TI CPSW. Adds VLAN and port management abilities for etherswitchcfg(8). The code is conditionally enabled for now, because it is not necessary on single ethernet use cases. Obtained from: pfSense MFC after: 2 weeks Sponsored by: Rubicon Communications, LLC (Netgate)
2016-11-24 20:14:43 +00:00
CPSW_ETHERSWITCH opt_cpsw.h
Replace generic ARM11 option with more specific support for ARM1136 and ARM1176 Submitted by: Daisuke Aoyama <aoyama at peach.ne.jp> Obtained from: NetBSD
2012-12-20 04:32:02 +00:00
CPU_ARM1176 opt_global.h
Remake support for SMP kernel on UP cpu: - Use new option SMP_ON_UP instead of (mis)using specific CPU type. By this, any SMP kernel can be compiled with SMP_ON_UP support. - Enable runtime detection of CPU multiprocessor extensions only if SMP_ON_UP option is used. In other cases (pure SMP or UP), statically compile only required variant. - Don't leak multiprocessor instructions to UP kernel. - Correctly handle data cache write back to point of unification. DCCMVAU is supported on all armv7 cpus. - For SMP_ON_UP kernels, detect proper TTB flags on runtime. Differential Revision: https://reviews.freebsd.org/D9133
2017-02-02 06:14:44 +00:00
CPU_CORTEXA opt_global.h
Add identification and necessary type checks for Krait CPU cores. Krait CPU is used in Qualcomm Snapdragon S4 and Snapdragon 400/600/800 SoCs and has architectural similarities to ARM Cortex-A15. As for development boards IFC6400 series embedded boards from Inforce Computing uses Snapdragon S4 Pro/APQ8064. Approved by: stas (mentor)
2013-12-20 00:56:23 +00:00
CPU_KRAIT opt_global.h
Merging projects/armv6, part 1 Cummulative patch of changes that are not vendor-specific: - ARMv6 and ARMv7 architecture support - ARM SMP support - VFP/Neon support - ARM Generic Interrupt Controller driver - Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
CPU_MV_PJ4B opt_global.h
Remake support for SMP kernel on UP cpu: - Use new option SMP_ON_UP instead of (mis)using specific CPU type. By this, any SMP kernel can be compiled with SMP_ON_UP support. - Enable runtime detection of CPU multiprocessor extensions only if SMP_ON_UP option is used. In other cases (pure SMP or UP), statically compile only required variant. - Don't leak multiprocessor instructions to UP kernel. - Correctly handle data cache write back to point of unification. DCCMVAU is supported on all armv7 cpus. - For SMP_ON_UP kernels, detect proper TTB flags on runtime. Differential Revision: https://reviews.freebsd.org/D9133
2017-02-02 06:14:44 +00:00
SMP_ON_UP opt_global.h # Runtime detection of MP extensions
Clean up the Amlogic interrupt controller driver to handle the case where we have both the Amlogic pic and a GIC. This may be the case in some configurations. Differential Revision: https://reviews.freebsd.org/D2432 Submitted by: John Wehle <john@feith.com>
2015-05-18 11:04:07 +00:00
DEV_GIC opt_global.h
Now that the PMU implementation is independent of HWPMC as of r288992 use it to manage the CCNT. Use the CNNT for get_cyclecount() instead of binuptime() when device pmu is compiled in; if it fails to attach, fall back to the former method. Enable by default for the BeagleBoneBlack configuration. Optained from: Cambridge/L41 Sponsored by: DARPA/AFRL Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D3837
2015-11-09 17:57:32 +00:00
DEV_PMU opt_global.h
Add support for getting the memory map from EFI if it has been pased in by loader.efi.
2015-05-24 16:11:30 +00:00
EFI opt_platform.h
Add two new options, FLASHADDR, which defines the address the flash is mapped at, and LOADERRAMADDR, the address at which the loader maps the ram at at the time the kernel is booted. They are used to detect if the kernel is booted from the onboard flash. Define those for the IQ31244
2007-02-19 01:03:08 +00:00
FLASHADDR opt_global.h
Add necessary changes to support various Amlogic SoC devices specially aml8726-m6 and aml8726-m8b SoC based devices. aml8726-m6 SoC exist in devices such as Visson ATV-102. Hardkernel ODROID-C1 board has aml8726-m8b SoC. The following support is included: Basic machdep code SMP Interrupt controller Clock control driver (aka gate) Pinctrl Timer Real time clock UART GPIO I2C SD controller SDXC controller USB Watchdog Random number generator PLL / Clock frequency measurement Frame buffer Submitted by: John Wehle Approved by: stas (mentor)
2015-03-31 11:50:46 +00:00
GIC_DEFAULT_ICFGR_INIT opt_global.h
Rename ARM_INTRNG and MIPS_INTRNG to INTRNG. This will help with machine independent code that needs to know about INTRNG such as PCI drivers. Obtained from: ABT Systems Ltd Sponsored by: The FreeBSD Foundation
2016-04-15 16:05:41 +00:00
INTRNG opt_global.h
Create default_parse_boot_param which, if FreeBSD /boot/loader support is enabled, sets values based on the metadata passed in. Otherwise fake_preload_metadata is called. Change the default parse_boot_param to default_parse_boot_param. Enable this functionality only on the mv platform, which is where most of the code is from. Reviewed by: cognet, Ian Lapore
2012-06-14 04:09:20 +00:00
FREEBSD_BOOT_LOADER opt_global.h
Allow to override default kernel virtual address assignment on ARM Each plaform performs virtual memory split between kernel and user space and assigns kernel certain amount of memory space. However, is is sometimes reasonable to change the default values. Such situation may happen on systems where the demand for kernel buffers is high, many devices occupying memory etc. This of course comes with the cost of decreasing user space memory range so shall be used with care. Most embedded systems will not suffer from this limtation but rather take advantage of this potential since default behavior is left unchanged. Submitted by: Wojciech Macek <wma@semihalf.com> Reviewed by: imp Obtained from: Semihalf
2015-03-20 10:15:34 +00:00
KERNBASE opt_global.h
Add new options : PHYSADDR : Address of the physical memory KERNPHYSADDR : Physical address where the kernel starts KERNVIRTADDR : Virtual address of the kernel STARTUP_PAGETABLE_ADDR : Where to put the page table at bootstrap + Xscale specific options
2004-09-23 22:52:25 +00:00
KERNVIRTADDR opt_global.h
Add support for parsing Linux ATAGs such as you'd see from uboot or redboot. Support is very preiminary and likely needs some work. Also, do some minor code shuffling of the FreeBSD /boot/loader metadata parsing code. This code is preliminary and should be used with caution.
2012-06-14 04:16:16 +00:00
LINUX_BOOT_ABI opt_global.h
Add a new ARM kernel option, LOCORE_MAP_MB, to control the size of the kernel VA mapping in the temporary page tables set up by locore-v6.S. The number used to be hard-coded to 64MB, which is still the default if the kernel option is not specified. However, 64MB is insufficient for using a large mdroot filesystem. The hard-coded number can't be safely increased because too large a number may run into memory-mapped IO space on some SoCs that must not be mapped as ordinary memory.
2017-12-26 19:02:56 +00:00
LOCORE_MAP_MB opt_locore.h
Create a new option ARM_USE_V6_BUSDMA to force an armv4/5 kernel to use the armv6 busdma interface. This interface uses more memory than the armv4 one, but bounces more data more often so may be more correct than the armv4 one. It is intended for debugging purposes only at the moment.
2017-06-18 21:03:48 +00:00
NKPT2PG opt_pmap.h
Resurrect Skyeye support : Add a new option, SKYEYE_WORKAROUNDS, which as the name suggests adds workarounds for things skyeye doesn't simulate. Specifically : - Use USART0 instead of DBGU as the console, make it not use DMA, and manually provoke an interrupt when we're done in the transmit function. - Skyeye maintains an internal counter for clock, but apparently there's no way to access it, so hack the timecounter code to return a value which is increased at every clock interrupts. This is gross, but I didn't find a better way to implement timecounters without hacking Skyeye to get the counter value. - Force the write-back of PTEs once we're done writing them, even if they are supposed to be write-through. I don't know why I have to do that.
2006-05-13 23:41:16 +00:00
PHYSADDR opt_global.h
Add the start of the ARM platform code. This is based on the PowerPC platform code, it is expected these will be merged in the future when the ARM code is more complete. Until more boards can be tested only use this with the Raspberry Pi and rrename the functions on the other SoCs. Reviewed by: ian@
2014-05-17 11:27:36 +00:00
PLATFORM opt_global.h
Add support for mapping a small range of the SoC devices for debugging purposes early in boot.
2014-01-22 21:23:58 +00:00
SOCDEV_PA opt_global.h
SOCDEV_VA opt_global.h
Port the new PV entry allocator from amd64/i386/mips to armv6/v7. PV entries are now roughly half the size. Instead of using a shared UMA zone for 28 byte pv entries (two 8-byte tailq nodes, a 4 byte pointer, a 4 byte address and 4 byte flags), we allocate a page at a time per process. This provides 252 pv entries per process (actually, per pmap address space) and eliminates one of the 8-byte tailq entries since we now can track per-process pv entries implicitly. The pointer to the pmap can be eliminated by doing address arithmetic to find the metadata on the page headers to find a single pointer shared by all 252 entries. There is an 8-int bitmap for the freelist of those 252 entries. When in serious low memory condition, allocation of another pv_chunk is possible by freeing some pages in pmap_pv_reclaim(). Added pv_entry/pv_chunk related statistics to pmap. pv_entry/pv_chunk statistics can be accessed via sysctl vm.pmap. Ported PTE freelist of KVA allocation and maintenance from i386. Using an idea from Stephan Uphoff, use the empty pte's that correspond to the unused kva in the pv memory block to thread a freelist through. This allows us to free pages that used to be used for pv entry chunks since we can now track holes in the kva memory block. As both ARM pmap.c and pmap-v6.c use the same header and pv_entry, pmap and md_page structures are different, it was needed to separate code designed for ARMv6/7 from the one for other ARMs. Submitted by: Zbigniew Bodek <zbb@semihalf.com> Reviewed by: alc Sponsored by: The FreeBSD Foundation, Semihalf
2013-05-14 09:47:58 +00:00
PV_STATS opt_pmap.h
Move the Allwinner kernels to use fdt_pinctrl. This will read the pin configuration from the FDT data, then set the pins into the requested state. As part of this the gpio controller now reports the correct number of pins instead of returning the number of bank * 32. To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for the SoC the kernel will boot on. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D5177
2016-02-17 18:28:03 +00:00
SOC_ALLWINNER_A10 opt_global.h
Add support for Allwinner A13. Reviewed by: jmcneill Relnotes: yes Differential Revision: https://reviews.freebsd.org/D6809
2016-07-08 23:38:25 +00:00
SOC_ALLWINNER_A13 opt_global.h
Move the Allwinner kernels to use fdt_pinctrl. This will read the pin configuration from the FDT data, then set the pins into the requested state. As part of this the gpio controller now reports the correct number of pins instead of returning the number of bank * 32. To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for the SoC the kernel will boot on. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D5177
2016-02-17 18:28:03 +00:00
SOC_ALLWINNER_A20 opt_global.h
Add the Allwinner A31 and A31s padconf support. It's currently unused, but will be needed when we bring in further support for these SoCs. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D5340
2016-02-25 12:17:41 +00:00
SOC_ALLWINNER_A31 opt_global.h
SOC_ALLWINNER_A31S opt_global.h
Allwinner: Add A33 support Add basic support for A33/R16 that is enough to boot a kernel. This adds the platform code, padconf data and the new clocks strings. MFC after: 2 weeks
2017-01-04 03:35:39 +00:00
SOC_ALLWINNER_A33 opt_global.h
Add support for the Allwinner A83T (sun8iw6p1) SoC. Clocks, GPIO, UART, SD card / eMMC, USB, watchdog, and ethernet are supported. Note that the A83T contains two clusters of four Cortex-A7 CPUs, and only CPUs in first cluster are started for now. Tested on a Sinovoip Banana Pi BPI-M3.
2016-05-05 09:41:57 +00:00
SOC_ALLWINNER_A83T opt_global.h
Allwinner: Add support for H2 Plus SoC H2+ SoC is a stripped down version of H3 without gigabit ethernet and 4K HDMI. Also add sun8i-h2-plus-orangepi-zero.dts to the build as we run on this board.
2017-06-24 16:41:26 +00:00
SOC_ALLWINNER_H2PLUS opt_global.h
Add support for Allwinner H3 SoC. For now clocks, GPIO, Pinmux, UART, MMC, EHCI is supported. Tested on OrangePi-One Reviewed by: jmcneill Approved by: cognet (mentor) Differential Revision: https://reviews.freebsd.org/D6311
2016-05-13 18:20:54 +00:00
SOC_ALLWINNER_H3 opt_global.h
Add SOC_ALTERA_* kernel options per each SoC and use it to conditionally compile the code. Reviewed by: andrew Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D9836
2017-02-28 16:20:33 +00:00
SOC_ALTERA_ARRIA10 opt_global.h
SOC_ALTERA_CYCLONE5 opt_global.h
Add the SOC_BCM2835 and SOC_BCM2836 options for the arm kernel and add the former to std.bcm2835. These will be used to enable support for the Raspberry Pi 2. MFC after: 1 week
2015-03-24 18:46:01 +00:00
SOC_BCM2835 opt_global.h
SOC_BCM2836 opt_global.h
arm: add SOC_BRCM_BCM2837 option, include it in GENERIC We use armv7/GENERIC for the RPI2 images. The original RPI2 is actually a 32-bit BCM2836, but v1.2 was upgraded to the 64-bit BCM2837. The project continues to provide the RPI2 image as armv7, as it's the lowest common denominator of the two. Historically, we've just kind of implicitly acknowledged this by including some bcm2837 bits on a SOC_BCM2836 kernel config -- this worked until r354875 added code that actually cared. Acknowledge formally that BCM2837 is valid in arm32. This name is inconsistent with the other BCM* SOC on !arm64 for two reasons: 1. It's a pre-existing option on arm64, and 2. the naming convention on arm/ should've arguably changed to include BRCM #1 seems to be a convincing enough argument to maintain the existing name for it.
2019-12-17 23:01:37 +00:00
SOC_BRCM_BCM2837 opt_global.h
Add the SOC_IMX51, SOC_IMX53, and SOC_IMX6 options. These are used to select which SoCs the kernel config will support. Use these options to merge files.imx51 and files.imx53.
2015-04-23 22:20:43 +00:00
SOC_IMX51 opt_global.h
SOC_IMX53 opt_global.h
SOC_IMX6 opt_global.h
Merging projects/armv6, part 1 Cummulative patch of changes that are not vendor-specific: - ARMv6 and ARMv7 architecture support - ARM SMP support - VFP/Neon support - ARM Generic Interrupt Controller driver - Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
SOC_MV_ARMADAXP opt_global.h
Introduce initial support for Marvell Armada38x This commit introduces initial support for Marvell Armada38x platform. Changes: - Add common DTS files for Armada38x SoCs and DTS file for A388-GP - Add ARMADA38X kernel configuration - Add option SOC_MV_ARMADA38X and set MV_PCI_PORTS - Add list of files to compile - Implement get_tclk(), get_sar_value(), cpu_reset() functions - Add CPU ID and SoC numbers - Correct ifdefs in arm/mv/timer.c Reviewed by: ian, imp Obtained from: Semihalf Sponsored by: Stormshield Submitted by: Michal Stanek <mst@semihalf.com> Differential revision: https://reviews.freebsd.org/D4210
2016-01-20 13:14:36 +00:00
SOC_MV_ARMADA38X opt_global.h
Introduce basic support for Marvell families of system-on-chip ARM devices: * Orion - 88F5181 - 88F5182 - 88F5281 * Kirkwood - 88F6281 * Discovery - MV78100 The above families of SOCs are built around CPU cores compliant with ARMv5TE instruction set architecture definition. They share a number of integrated peripherals. This commit brings support for the following basic elements: * GPIO * Interrupt controller * L1, L2 cache * Timers, watchdog, RTC * TWSI (I2C) * UART Other peripherals drivers will be introduced separately. Reviewed by: imp, marcel, stass (Thanks guys!) Obtained from: Marvell, Semihalf
2008-10-13 20:07:13 +00:00
SOC_MV_DISCOVERY opt_global.h
SOC_MV_KIRKWOOD opt_global.h
SOC_MV_ORION opt_global.h
Merging projects/armv6, part 1 Cummulative patch of changes that are not vendor-specific: - ARMv6 and ARMv7 architecture support - ARM SMP support - VFP/Neon support - ARM Generic Interrupt Controller driver - Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
SOC_OMAP3 opt_global.h
SOC_OMAP4 opt_global.h
SOC_TI_AM335X opt_global.h
VM_MAXUSER_ADDRESS opt_global.h
Rename device vfp to option VFP and retire the ARM_VFP_SUPPORT option. This simplifies enabling as previously both options were required to be enabled, now we only need a single option. While here enable VFP on the PandaBoard.
2013-08-17 18:51:38 +00:00
VFP opt_global.h
Reference in New Issue Copy Permalink