d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2512630061
freebsd-skq/sys/net/debugnet_int.h

97 lines
3.1 KiB
C
Raw Normal View History

Split out a more generic debugnet(4) from netdump(4) Debugnet is a simplistic and specialized panic- or debug-time reliable datagram transport. It can drive a single connection at a time and is currently unidirectional (debug/panic machine transmit to remote server only). It is mostly a verbatim code lift from netdump(4). Netdump(4) remains the only consumer (until the rest of this patch series lands). The INET-specific logic has been extracted somewhat more thoroughly than previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as much as possible as is protocol-independent, remains in debugnet.c. The separation is not perfect and future improvement is welcome. Supporting INET6 is a long-term goal. Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to 'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the generic module would be more confusing than the refactoring. The only functional change here is the mbuf allocation / tracking. Instead of initiating solely on netdump-configured interface(s) at dumpon(8) configuration time, we watch for any debugnet-enabled NIC for link activation and query it for mbuf parameters at that time. If they exceed the existing high-water mark allocation, we re-allocate and track the new high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone. In a future patch in this series, this will allow initiating netdump from panic ddb(4) without pre-panic configuration. No other functional change intended. Reviewed by: markj (earlier version) Some discussion with: emaste, jhb Objection from: marius Differential Revision: https://reviews.freebsd.org/D21421
2019-10-17 16:23:03 +00:00
/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2019 Isilon Systems, LLC.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#pragma once
#ifndef DEBUGNET_INTERNAL
#error "Don't include this"
#endif
#define DNETDEBUG(f, ...) do { \
if (debugnet_debug > 0) \
printf(("%s: " f), __func__, ## __VA_ARGS__); \
} while (0)
#define DNETDEBUG_IF(i, f, ...) do { \
if (debugnet_debug > 0) \
if_printf((i), ("%s: " f), __func__, ## __VA_ARGS__); \
} while (0)
#define DNETDEBUGV(f, ...) do { \
if (debugnet_debug > 1) \
printf(("%s: " f), __func__, ## __VA_ARGS__); \
} while (0)
enum dnet_pcb_st {
DN_STATE_INIT = 1,
DN_STATE_HAVE_GW_MAC,
DN_STATE_GOT_HERALD_PORT,
debugnet(4): Add optional full-duplex mode It remains unattached to any client protocol. Netdump is unaffected (remaining half-duplex). The intended consumer is NetGDB. Submitted by: John Reimer <john.reimer AT emc.com> (earlier version) Discussed with: markj Differential Revision: https://reviews.freebsd.org/D21541
2019-10-17 20:25:15 +00:00
DN_STATE_REMOTE_CLOSED,
Split out a more generic debugnet(4) from netdump(4) Debugnet is a simplistic and specialized panic- or debug-time reliable datagram transport. It can drive a single connection at a time and is currently unidirectional (debug/panic machine transmit to remote server only). It is mostly a verbatim code lift from netdump(4). Netdump(4) remains the only consumer (until the rest of this patch series lands). The INET-specific logic has been extracted somewhat more thoroughly than previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as much as possible as is protocol-independent, remains in debugnet.c. The separation is not perfect and future improvement is welcome. Supporting INET6 is a long-term goal. Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to 'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the generic module would be more confusing than the refactoring. The only functional change here is the mbuf allocation / tracking. Instead of initiating solely on netdump-configured interface(s) at dumpon(8) configuration time, we watch for any debugnet-enabled NIC for link activation and query it for mbuf parameters at that time. If they exceed the existing high-water mark allocation, we re-allocate and track the new high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone. In a future patch in this series, this will allow initiating netdump from panic ddb(4) without pre-panic configuration. No other functional change intended. Reviewed by: markj (earlier version) Some discussion with: emaste, jhb Objection from: marius Differential Revision: https://reviews.freebsd.org/D21421
2019-10-17 16:23:03 +00:00
};
struct debugnet_pcb {
uint64_t dp_rcvd_acks;
in_addr_t dp_client;
in_addr_t dp_server;
in_addr_t dp_gateway;
uint32_t dp_seqno;
struct ether_addr dp_gw_mac;
uint16_t dp_server_port;
struct ifnet *dp_ifp;
/* Saved driver if_input to restore on close. */
void (*dp_drv_input)(struct ifnet *, struct mbuf *);
debugnet(4): Add optional full-duplex mode It remains unattached to any client protocol. Netdump is unaffected (remaining half-duplex). The intended consumer is NetGDB. Submitted by: John Reimer <john.reimer AT emc.com> (earlier version) Discussed with: markj Differential Revision: https://reviews.freebsd.org/D21541
2019-10-17 20:25:15 +00:00
/* RX handler for bidirectional protocols. */
void (*dp_rx_handler)(struct debugnet_pcb *,
struct mbuf **);
Split out a more generic debugnet(4) from netdump(4) Debugnet is a simplistic and specialized panic- or debug-time reliable datagram transport. It can drive a single connection at a time and is currently unidirectional (debug/panic machine transmit to remote server only). It is mostly a verbatim code lift from netdump(4). Netdump(4) remains the only consumer (until the rest of this patch series lands). The INET-specific logic has been extracted somewhat more thoroughly than previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as much as possible as is protocol-independent, remains in debugnet.c. The separation is not perfect and future improvement is welcome. Supporting INET6 is a long-term goal. Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to 'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the generic module would be more confusing than the refactoring. The only functional change here is the mbuf allocation / tracking. Instead of initiating solely on netdump-configured interface(s) at dumpon(8) configuration time, we watch for any debugnet-enabled NIC for link activation and query it for mbuf parameters at that time. If they exceed the existing high-water mark allocation, we re-allocate and track the new high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone. In a future patch in this series, this will allow initiating netdump from panic ddb(4) without pre-panic configuration. No other functional change intended. Reviewed by: markj (earlier version) Some discussion with: emaste, jhb Objection from: marius Differential Revision: https://reviews.freebsd.org/D21421
2019-10-17 16:23:03 +00:00
enum dnet_pcb_st dp_state;
debugnet(4): Add optional full-duplex mode It remains unattached to any client protocol. Netdump is unaffected (remaining half-duplex). The intended consumer is NetGDB. Submitted by: John Reimer <john.reimer AT emc.com> (earlier version) Discussed with: markj Differential Revision: https://reviews.freebsd.org/D21541
2019-10-17 20:25:15 +00:00
uint16_t dp_client_port;
debugnet(4): Infer non-server connection parameters Loosen requirements for connecting to debugnet-type servers. Only require a destination address; the rest can theoretically be inferred from the routing table. Relax corresponding constraints in netdump(4) and move ifp validation to debugnet connection time. Submitted by: John Reimer <john.reimer AT emc.com> (earlier version) Reviewed by: markj Differential Revision: https://reviews.freebsd.org/D21482
2019-10-17 20:10:32 +00:00
bool dp_event_started;
Split out a more generic debugnet(4) from netdump(4) Debugnet is a simplistic and specialized panic- or debug-time reliable datagram transport. It can drive a single connection at a time and is currently unidirectional (debug/panic machine transmit to remote server only). It is mostly a verbatim code lift from netdump(4). Netdump(4) remains the only consumer (until the rest of this patch series lands). The INET-specific logic has been extracted somewhat more thoroughly than previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as much as possible as is protocol-independent, remains in debugnet.c. The separation is not perfect and future improvement is welcome. Supporting INET6 is a long-term goal. Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to 'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the generic module would be more confusing than the refactoring. The only functional change here is the mbuf allocation / tracking. Instead of initiating solely on netdump-configured interface(s) at dumpon(8) configuration time, we watch for any debugnet-enabled NIC for link activation and query it for mbuf parameters at that time. If they exceed the existing high-water mark allocation, we re-allocate and track the new high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone. In a future patch in this series, this will allow initiating netdump from panic ddb(4) without pre-panic configuration. No other functional change intended. Reviewed by: markj (earlier version) Some discussion with: emaste, jhb Objection from: marius Differential Revision: https://reviews.freebsd.org/D21421
2019-10-17 16:23:03 +00:00
};
/* TODO(CEM): Obviate this assertion by using a BITSET(9) for acks. */
CTASSERT(sizeof(((struct debugnet_pcb *)0)->dp_rcvd_acks) * NBBY >=
DEBUGNET_MAX_IN_FLIGHT);
extern unsigned debugnet_debug;
SYSCTL_DECL(_net_debugnet);
int debugnet_ether_output(struct mbuf *, struct ifnet *, struct ether_addr,
u_short);
void debugnet_handle_udp(struct debugnet_pcb *, struct mbuf **);
#ifdef INET
int debugnet_arp_gw(struct debugnet_pcb *);
void debugnet_handle_arp(struct debugnet_pcb *, struct mbuf **);
void debugnet_handle_ip(struct debugnet_pcb *, struct mbuf **);
int debugnet_ip_output(struct debugnet_pcb *, struct mbuf *);
#endif
Reference in New Issue Copy Permalink