freebsd-skq/sys/net80211/ieee80211_freebsd.c

834 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2003-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* IEEE 802.11 support (FreeBSD-specific code)
*/
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/linker.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/proc.h>
#include <sys/sysctl.h>
#include <sys/socket.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_clone.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/ethernet.h>
#include <net/route.h>
#include <net/vnet.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_input.h>
SYSCTL_NODE(_net, OID_AUTO, wlan, CTLFLAG_RD, 0, "IEEE 80211 parameters");
#ifdef IEEE80211_DEBUG
int ieee80211_debug = 0;
SYSCTL_INT(_net_wlan, OID_AUTO, debug, CTLFLAG_RW, &ieee80211_debug,
0, "debugging printfs");
#endif
static MALLOC_DEFINE(M_80211_COM, "80211com", "802.11 com state");
/*
* Allocate/free com structure in conjunction with ifnet;
* these routines are registered with if_register_com_alloc
* below and are called automatically by the ifnet code
* when the ifnet of the parent device is created.
*/
static void *
wlan_alloc(u_char type, struct ifnet *ifp)
{
struct ieee80211com *ic;
ic = malloc(sizeof(struct ieee80211com), M_80211_COM, M_WAITOK|M_ZERO);
ic->ic_ifp = ifp;
return (ic);
}
static void
wlan_free(void *ic, u_char type)
{
free(ic, M_80211_COM);
}
static int
wlan_clone_create(struct if_clone *ifc, int unit, caddr_t params)
{
struct ieee80211_clone_params cp;
struct ieee80211vap *vap;
struct ieee80211com *ic;
struct ifnet *ifp;
int error;
error = copyin(params, &cp, sizeof(cp));
if (error)
return error;
ifp = ifunit(cp.icp_parent);
if (ifp == NULL)
return ENXIO;
/* XXX move printfs to DIAGNOSTIC before release */
if (ifp->if_type != IFT_IEEE80211) {
if_printf(ifp, "%s: reject, not an 802.11 device\n", __func__);
return ENXIO;
}
if (cp.icp_opmode >= IEEE80211_OPMODE_MAX) {
if_printf(ifp, "%s: invalid opmode %d\n",
__func__, cp.icp_opmode);
return EINVAL;
}
ic = ifp->if_l2com;
if ((ic->ic_caps & ieee80211_opcap[cp.icp_opmode]) == 0) {
if_printf(ifp, "%s mode not supported\n",
ieee80211_opmode_name[cp.icp_opmode]);
return EOPNOTSUPP;
}
if ((cp.icp_flags & IEEE80211_CLONE_TDMA) &&
#ifdef IEEE80211_SUPPORT_TDMA
(ic->ic_caps & IEEE80211_C_TDMA) == 0
#else
(1)
#endif
) {
if_printf(ifp, "TDMA not supported\n");
return EOPNOTSUPP;
}
vap = ic->ic_vap_create(ic, ifc->ifc_name, unit,
cp.icp_opmode, cp.icp_flags, cp.icp_bssid,
cp.icp_flags & IEEE80211_CLONE_MACADDR ?
cp.icp_macaddr : (const uint8_t *)IF_LLADDR(ifp));
return (vap == NULL ? EIO : 0);
}
static void
wlan_clone_destroy(struct ifnet *ifp)
{
struct ieee80211vap *vap = ifp->if_softc;
struct ieee80211com *ic = vap->iv_ic;
ic->ic_vap_delete(vap);
}
IFC_SIMPLE_DECLARE(wlan, 0);
void
ieee80211_vap_destroy(struct ieee80211vap *vap)
{
if_clone_destroyif(&wlan_cloner, vap->iv_ifp);
}
int
ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS)
{
int msecs = ticks_to_msecs(*(int *)arg1);
int error, t;
error = sysctl_handle_int(oidp, &msecs, 0, req);
if (error || !req->newptr)
return error;
t = msecs_to_ticks(msecs);
*(int *)arg1 = (t < 1) ? 1 : t;
return 0;
}
static int
ieee80211_sysctl_inact(SYSCTL_HANDLER_ARGS)
{
int inact = (*(int *)arg1) * IEEE80211_INACT_WAIT;
int error;
error = sysctl_handle_int(oidp, &inact, 0, req);
if (error || !req->newptr)
return error;
*(int *)arg1 = inact / IEEE80211_INACT_WAIT;
return 0;
}
static int
ieee80211_sysctl_parent(SYSCTL_HANDLER_ARGS)
{
struct ieee80211com *ic = arg1;
const char *name = ic->ic_ifp->if_xname;
return SYSCTL_OUT(req, name, strlen(name));
}
static int
ieee80211_sysctl_radar(SYSCTL_HANDLER_ARGS)
{
struct ieee80211com *ic = arg1;
int t = 0, error;
error = sysctl_handle_int(oidp, &t, 0, req);
if (error || !req->newptr)
return error;
IEEE80211_LOCK(ic);
ieee80211_dfs_notify_radar(ic, ic->ic_curchan);
IEEE80211_UNLOCK(ic);
return 0;
}
void
ieee80211_sysctl_attach(struct ieee80211com *ic)
{
}
void
ieee80211_sysctl_detach(struct ieee80211com *ic)
{
}
void
ieee80211_sysctl_vattach(struct ieee80211vap *vap)
{
struct ifnet *ifp = vap->iv_ifp;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *oid;
char num[14]; /* sufficient for 32 bits */
2008-12-18 23:00:09 +00:00
ctx = (struct sysctl_ctx_list *) malloc(sizeof(struct sysctl_ctx_list),
M_DEVBUF, M_NOWAIT | M_ZERO);
if (ctx == NULL) {
if_printf(ifp, "%s: cannot allocate sysctl context!\n",
__func__);
return;
}
sysctl_ctx_init(ctx);
snprintf(num, sizeof(num), "%u", ifp->if_dunit);
oid = SYSCTL_ADD_NODE(ctx, &SYSCTL_NODE_CHILDREN(_net, wlan),
OID_AUTO, num, CTLFLAG_RD, NULL, "");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"%parent", CTLTYPE_STRING | CTLFLAG_RD, vap->iv_ic, 0,
ieee80211_sysctl_parent, "A", "parent device");
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"driver_caps", CTLFLAG_RW, &vap->iv_caps, 0,
"driver capabilities");
#ifdef IEEE80211_DEBUG
vap->iv_debug = ieee80211_debug;
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"debug", CTLFLAG_RW, &vap->iv_debug, 0,
"control debugging printfs");
#endif
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"bmiss_max", CTLFLAG_RW, &vap->iv_bmiss_max, 0,
"consecutive beacon misses before scanning");
/* XXX inherit from tunables */
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_run", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_run, 0,
ieee80211_sysctl_inact, "I",
"station inactivity timeout (sec)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_probe", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_probe, 0,
ieee80211_sysctl_inact, "I",
"station inactivity probe timeout (sec)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_auth", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_auth, 0,
ieee80211_sysctl_inact, "I",
"station authentication timeout (sec)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_init", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_init, 0,
ieee80211_sysctl_inact, "I",
"station initial state timeout (sec)");
if (vap->iv_htcaps & IEEE80211_HTC_HT) {
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"ampdu_mintraffic_bk", CTLFLAG_RW,
&vap->iv_ampdu_mintraffic[WME_AC_BK], 0,
"BK traffic tx aggr threshold (pps)");
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"ampdu_mintraffic_be", CTLFLAG_RW,
&vap->iv_ampdu_mintraffic[WME_AC_BE], 0,
"BE traffic tx aggr threshold (pps)");
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"ampdu_mintraffic_vo", CTLFLAG_RW,
&vap->iv_ampdu_mintraffic[WME_AC_VO], 0,
"VO traffic tx aggr threshold (pps)");
SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"ampdu_mintraffic_vi", CTLFLAG_RW,
&vap->iv_ampdu_mintraffic[WME_AC_VI], 0,
"VI traffic tx aggr threshold (pps)");
}
if (vap->iv_caps & IEEE80211_C_DFS) {
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"radar", CTLTYPE_INT | CTLFLAG_RW, vap->iv_ic, 0,
ieee80211_sysctl_radar, "I", "simulate radar event");
}
vap->iv_sysctl = ctx;
vap->iv_oid = oid;
}
void
ieee80211_sysctl_vdetach(struct ieee80211vap *vap)
{
if (vap->iv_sysctl != NULL) {
sysctl_ctx_free(vap->iv_sysctl);
2008-12-18 23:00:09 +00:00
free(vap->iv_sysctl, M_DEVBUF);
vap->iv_sysctl = NULL;
}
}
int
ieee80211_node_dectestref(struct ieee80211_node *ni)
{
/* XXX need equivalent of atomic_dec_and_test */
atomic_subtract_int(&ni->ni_refcnt, 1);
return atomic_cmpset_int(&ni->ni_refcnt, 0, 1);
}
void
ieee80211_drain_ifq(struct ifqueue *ifq)
{
struct ieee80211_node *ni;
struct mbuf *m;
for (;;) {
IF_DEQUEUE(ifq, m);
if (m == NULL)
break;
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
KASSERT(ni != NULL, ("frame w/o node"));
ieee80211_free_node(ni);
m->m_pkthdr.rcvif = NULL;
m_freem(m);
}
}
void
ieee80211_flush_ifq(struct ifqueue *ifq, struct ieee80211vap *vap)
{
struct ieee80211_node *ni;
struct mbuf *m, **mprev;
IF_LOCK(ifq);
mprev = &ifq->ifq_head;
while ((m = *mprev) != NULL) {
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
if (ni != NULL && ni->ni_vap == vap) {
*mprev = m->m_nextpkt; /* remove from list */
ifq->ifq_len--;
m_freem(m);
ieee80211_free_node(ni); /* reclaim ref */
} else
mprev = &m->m_nextpkt;
}
/* recalculate tail ptr */
m = ifq->ifq_head;
for (; m != NULL && m->m_nextpkt != NULL; m = m->m_nextpkt)
;
ifq->ifq_tail = m;
IF_UNLOCK(ifq);
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*
* As above, for mbufs allocated with m_gethdr/MGETHDR
* or initialized by M_COPY_PKTHDR.
*/
#define MC_ALIGN(m, len) \
do { \
(m)->m_data += (MCLBYTES - (len)) &~ (sizeof(long) - 1); \
} while (/* CONSTCOND */ 0)
/*
* Allocate and setup a management frame of the specified
* size. We return the mbuf and a pointer to the start
* of the contiguous data area that's been reserved based
* on the packet length. The data area is forced to 32-bit
* alignment and the buffer length to a multiple of 4 bytes.
* This is done mainly so beacon frames (that require this)
* can use this interface too.
*/
struct mbuf *
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen)
{
struct mbuf *m;
u_int len;
/*
* NB: we know the mbuf routines will align the data area
* so we don't need to do anything special.
*/
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
len = roundup2(headroom + pktlen, 4);
KASSERT(len <= MCLBYTES, ("802.11 mgt frame too large: %u", len));
if (len < MINCLSIZE) {
m = m_gethdr(M_NOWAIT, MT_DATA);
/*
* Align the data in case additional headers are added.
* This should only happen when a WEP header is added
* which only happens for shared key authentication mgt
* frames which all fit in MHLEN.
*/
if (m != NULL)
MH_ALIGN(m, len);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
} else {
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
if (m != NULL)
MC_ALIGN(m, len);
}
if (m != NULL) {
m->m_data += headroom;
*frm = m->m_data;
}
return m;
}
/*
* Re-align the payload in the mbuf. This is mainly used (right now)
* to handle IP header alignment requirements on certain architectures.
*/
struct mbuf *
ieee80211_realign(struct ieee80211vap *vap, struct mbuf *m, size_t align)
{
int pktlen, space;
struct mbuf *n;
pktlen = m->m_pkthdr.len;
space = pktlen + align;
if (space < MINCLSIZE)
n = m_gethdr(M_DONTWAIT, MT_DATA);
else {
n = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR,
space <= MCLBYTES ? MCLBYTES :
#if MJUMPAGESIZE != MCLBYTES
space <= MJUMPAGESIZE ? MJUMPAGESIZE :
#endif
space <= MJUM9BYTES ? MJUM9BYTES : MJUM16BYTES);
}
if (__predict_true(n != NULL)) {
m_move_pkthdr(n, m);
n->m_data = (caddr_t)(ALIGN(n->m_data + align) - align);
m_copydata(m, 0, pktlen, mtod(n, caddr_t));
n->m_len = pktlen;
} else {
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
mtod(m, const struct ieee80211_frame *), NULL,
"%s", "no mbuf to realign");
vap->iv_stats.is_rx_badalign++;
}
m_freem(m);
return n;
}
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
int
ieee80211_add_callback(struct mbuf *m,
void (*func)(struct ieee80211_node *, void *, int), void *arg)
{
struct m_tag *mtag;
struct ieee80211_cb *cb;
mtag = m_tag_alloc(MTAG_ABI_NET80211, NET80211_TAG_CALLBACK,
sizeof(struct ieee80211_cb), M_NOWAIT);
if (mtag == NULL)
return 0;
cb = (struct ieee80211_cb *)(mtag+1);
cb->func = func;
cb->arg = arg;
m_tag_prepend(m, mtag);
m->m_flags |= M_TXCB;
return 1;
}
void
ieee80211_process_callback(struct ieee80211_node *ni,
struct mbuf *m, int status)
{
struct m_tag *mtag;
mtag = m_tag_locate(m, MTAG_ABI_NET80211, NET80211_TAG_CALLBACK, NULL);
if (mtag != NULL) {
struct ieee80211_cb *cb = (struct ieee80211_cb *)(mtag+1);
cb->func(ni, cb->arg, status);
}
}
#include <sys/libkern.h>
void
get_random_bytes(void *p, size_t n)
{
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
uint8_t *dp = p;
while (n > 0) {
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
uint32_t v = arc4random();
size_t nb = n > sizeof(uint32_t) ? sizeof(uint32_t) : n;
bcopy(&v, dp, n > sizeof(uint32_t) ? sizeof(uint32_t) : n);
dp += sizeof(uint32_t), n -= nb;
}
}
/*
* Helper function for events that pass just a single mac address.
*/
static void
notify_macaddr(struct ifnet *ifp, int op, const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct ieee80211_join_event iev;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_SET(ifp->if_vnet);
memset(&iev, 0, sizeof(iev));
IEEE80211_ADDR_COPY(iev.iev_addr, mac);
rt_ieee80211msg(ifp, op, &iev, sizeof(iev));
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
}
void
ieee80211_notify_node_join(struct ieee80211_node *ni, int newassoc)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ifnet *ifp = vap->iv_ifp;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_SET_QUIET(ifp->if_vnet);
IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%snode join",
(ni == vap->iv_bss) ? "bss " : "");
if (ni == vap->iv_bss) {
notify_macaddr(ifp, newassoc ?
RTM_IEEE80211_ASSOC : RTM_IEEE80211_REASSOC, ni->ni_bssid);
if_link_state_change(ifp, LINK_STATE_UP);
} else {
notify_macaddr(ifp, newassoc ?
RTM_IEEE80211_JOIN : RTM_IEEE80211_REJOIN, ni->ni_macaddr);
}
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
}
void
ieee80211_notify_node_leave(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ifnet *ifp = vap->iv_ifp;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_SET_QUIET(ifp->if_vnet);
IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%snode leave",
(ni == vap->iv_bss) ? "bss " : "");
if (ni == vap->iv_bss) {
rt_ieee80211msg(ifp, RTM_IEEE80211_DISASSOC, NULL, 0);
if_link_state_change(ifp, LINK_STATE_DOWN);
} else {
/* fire off wireless event station leaving */
notify_macaddr(ifp, RTM_IEEE80211_LEAVE, ni->ni_macaddr);
}
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
}
void
ieee80211_notify_scan_done(struct ieee80211vap *vap)
{
struct ifnet *ifp = vap->iv_ifp;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n", "notify scan done");
/* dispatch wireless event indicating scan completed */
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_SET(ifp->if_vnet);
rt_ieee80211msg(ifp, RTM_IEEE80211_SCAN, NULL, 0);
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
}
void
ieee80211_notify_replay_failure(struct ieee80211vap *vap,
const struct ieee80211_frame *wh, const struct ieee80211_key *k,
u_int64_t rsc, int tid)
{
struct ifnet *ifp = vap->iv_ifp;
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, wh->i_addr2,
"%s replay detected tid %d <rsc %ju, csc %ju, keyix %u rxkeyix %u>",
k->wk_cipher->ic_name, tid, (intmax_t) rsc,
(intmax_t) k->wk_keyrsc[tid],
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
k->wk_keyix, k->wk_rxkeyix);
if (ifp != NULL) { /* NB: for cipher test modules */
struct ieee80211_replay_event iev;
IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1);
IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2);
iev.iev_cipher = k->wk_cipher->ic_cipher;
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
if (k->wk_rxkeyix != IEEE80211_KEYIX_NONE)
iev.iev_keyix = k->wk_rxkeyix;
else
iev.iev_keyix = k->wk_keyix;
iev.iev_keyrsc = k->wk_keyrsc[tid];
iev.iev_rsc = rsc;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_SET(ifp->if_vnet);
rt_ieee80211msg(ifp, RTM_IEEE80211_REPLAY, &iev, sizeof(iev));
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
}
}
void
ieee80211_notify_michael_failure(struct ieee80211vap *vap,
const struct ieee80211_frame *wh, u_int keyix)
{
struct ifnet *ifp = vap->iv_ifp;
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, wh->i_addr2,
"michael MIC verification failed <keyix %u>", keyix);
vap->iv_stats.is_rx_tkipmic++;
if (ifp != NULL) { /* NB: for cipher test modules */
struct ieee80211_michael_event iev;
IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1);
IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2);
iev.iev_cipher = IEEE80211_CIPHER_TKIP;
iev.iev_keyix = keyix;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_SET(ifp->if_vnet);
rt_ieee80211msg(ifp, RTM_IEEE80211_MICHAEL, &iev, sizeof(iev));
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
}
}
void
ieee80211_notify_wds_discover(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ifnet *ifp = vap->iv_ifp;
notify_macaddr(ifp, RTM_IEEE80211_WDS, ni->ni_macaddr);
}
void
ieee80211_notify_csa(struct ieee80211com *ic,
const struct ieee80211_channel *c, int mode, int count)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_csa_event iev;
memset(&iev, 0, sizeof(iev));
iev.iev_flags = c->ic_flags;
iev.iev_freq = c->ic_freq;
iev.iev_ieee = c->ic_ieee;
iev.iev_mode = mode;
iev.iev_count = count;
rt_ieee80211msg(ifp, RTM_IEEE80211_CSA, &iev, sizeof(iev));
}
void
ieee80211_notify_radar(struct ieee80211com *ic,
const struct ieee80211_channel *c)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_radar_event iev;
memset(&iev, 0, sizeof(iev));
iev.iev_flags = c->ic_flags;
iev.iev_freq = c->ic_freq;
iev.iev_ieee = c->ic_ieee;
rt_ieee80211msg(ifp, RTM_IEEE80211_RADAR, &iev, sizeof(iev));
}
void
ieee80211_notify_cac(struct ieee80211com *ic,
const struct ieee80211_channel *c, enum ieee80211_notify_cac_event type)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_cac_event iev;
memset(&iev, 0, sizeof(iev));
iev.iev_flags = c->ic_flags;
iev.iev_freq = c->ic_freq;
iev.iev_ieee = c->ic_ieee;
iev.iev_type = type;
rt_ieee80211msg(ifp, RTM_IEEE80211_CAC, &iev, sizeof(iev));
}
void
ieee80211_notify_node_deauth(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ifnet *ifp = vap->iv_ifp;
IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%s", "node deauth");
notify_macaddr(ifp, RTM_IEEE80211_DEAUTH, ni->ni_macaddr);
}
void
ieee80211_notify_node_auth(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ifnet *ifp = vap->iv_ifp;
IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%s", "node auth");
notify_macaddr(ifp, RTM_IEEE80211_AUTH, ni->ni_macaddr);
}
void
ieee80211_notify_country(struct ieee80211vap *vap,
const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t cc[2])
{
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211_country_event iev;
memset(&iev, 0, sizeof(iev));
IEEE80211_ADDR_COPY(iev.iev_addr, bssid);
iev.iev_cc[0] = cc[0];
iev.iev_cc[1] = cc[1];
rt_ieee80211msg(ifp, RTM_IEEE80211_COUNTRY, &iev, sizeof(iev));
}
void
ieee80211_notify_radio(struct ieee80211com *ic, int state)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_radio_event iev;
memset(&iev, 0, sizeof(iev));
iev.iev_state = state;
rt_ieee80211msg(ifp, RTM_IEEE80211_RADIO, &iev, sizeof(iev));
}
void
ieee80211_load_module(const char *modname)
{
#ifdef notyet
(void)kern_kldload(curthread, modname, NULL);
#else
printf("%s: load the %s module by hand for now.\n", __func__, modname);
#endif
}
static eventhandler_tag wlan_bpfevent;
static eventhandler_tag wlan_ifllevent;
static void
bpf_track(void *arg, struct ifnet *ifp, int dlt, int attach)
{
/* NB: identify vap's by if_start */
if (dlt == DLT_IEEE802_11_RADIO && ifp->if_start == ieee80211_start) {
struct ieee80211vap *vap = ifp->if_softc;
/*
* Track bpf radiotap listener state. We mark the vap
* to indicate if any listener is present and the com
* to indicate if any listener exists on any associated
* vap. This flag is used by drivers to prepare radiotap
* state only when needed.
*/
if (attach) {
ieee80211_syncflag_ext(vap, IEEE80211_FEXT_BPF);
if (vap->iv_opmode == IEEE80211_M_MONITOR)
atomic_add_int(&vap->iv_ic->ic_montaps, 1);
} else if (!bpf_peers_present(vap->iv_rawbpf)) {
ieee80211_syncflag_ext(vap, -IEEE80211_FEXT_BPF);
if (vap->iv_opmode == IEEE80211_M_MONITOR)
atomic_subtract_int(&vap->iv_ic->ic_montaps, 1);
}
}
}
static void
wlan_iflladdr(void *arg __unused, struct ifnet *ifp)
{
struct ieee80211com *ic = ifp->if_l2com;
struct ieee80211vap *vap, *next;
if (ifp->if_type != IFT_IEEE80211 || ic == NULL)
return;
IEEE80211_LOCK(ic);
TAILQ_FOREACH_SAFE(vap, &ic->ic_vaps, iv_next, next) {
/*
* If the MAC address has changed on the parent and it was
* copied to the vap on creation then re-sync.
*/
if (vap->iv_ic == ic &&
(vap->iv_flags_ext & IEEE80211_FEXT_UNIQMAC) == 0) {
IEEE80211_ADDR_COPY(vap->iv_myaddr, IF_LLADDR(ifp));
IEEE80211_UNLOCK(ic);
if_setlladdr(vap->iv_ifp, IF_LLADDR(ifp),
IEEE80211_ADDR_LEN);
IEEE80211_LOCK(ic);
}
}
IEEE80211_UNLOCK(ic);
}
/*
* Module glue.
*
* NB: the module name is "wlan" for compatibility with NetBSD.
*/
static int
wlan_modevent(module_t mod, int type, void *unused)
{
switch (type) {
case MOD_LOAD:
if (bootverbose)
printf("wlan: <802.11 Link Layer>\n");
wlan_bpfevent = EVENTHANDLER_REGISTER(bpf_track,
bpf_track, 0, EVENTHANDLER_PRI_ANY);
if (wlan_bpfevent == NULL)
return ENOMEM;
wlan_ifllevent = EVENTHANDLER_REGISTER(iflladdr_event,
wlan_iflladdr, NULL, EVENTHANDLER_PRI_ANY);
if (wlan_ifllevent == NULL) {
EVENTHANDLER_DEREGISTER(bpf_track, wlan_bpfevent);
return ENOMEM;
}
if_clone_attach(&wlan_cloner);
if_register_com_alloc(IFT_IEEE80211, wlan_alloc, wlan_free);
return 0;
case MOD_UNLOAD:
if_deregister_com_alloc(IFT_IEEE80211);
if_clone_detach(&wlan_cloner);
EVENTHANDLER_DEREGISTER(bpf_track, wlan_bpfevent);
EVENTHANDLER_DEREGISTER(iflladdr_event, wlan_ifllevent);
return 0;
}
return EINVAL;
}
static moduledata_t wlan_mod = {
"wlan",
wlan_modevent,
0
};
DECLARE_MODULE(wlan, wlan_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
MODULE_VERSION(wlan, 1);
MODULE_DEPEND(wlan, ether, 1, 1, 1);
#ifdef IEEE80211_ALQ
MODULE_DEPEND(wlan, alq, 1, 1, 1);
#endif /* IEEE80211_ALQ */