d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
26eae5c681
freebsd-skq/sys/geom/geom_disk.c

1013 lines
25 KiB
C
Raw Normal View History

First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
/*-
* Copyright (c) 2002 Poul-Henning Kamp
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Poul-Henning Kamp
* and NAI Labs, the Security Research Division of Network Associates, Inc.
* under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the
* DARPA CHATS research program.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Use __FBSDID(). Approved by: phk
2003-06-11 06:49:16 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
#include "opt_geom.h"
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <sys/bio.h>
Notify userspace listeners when geom disk attributes have changed sys/geom/geom_disk.c: disk_attr_changed(): Generate a devctl event of type GEOM:<attr> for every call. MFC after: 4 weeks Sponsored by: Spectra Logic Corp Differential Revision: https://reviews.freebsd.org/D5952
2016-04-21 16:43:15 +00:00
#include <sys/bus.h>
Simplify g_disk_ident_adjust() function and allow any printable character in serial number. Discussed with: trasz Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:39:06 +00:00
#include <sys/ctype.h>
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
#include <sys/fcntl.h>
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
#include <sys/malloc.h>
Include sys/sbuf.h directly. Reviewed by: pjd
2011-07-11 05:22:31 +00:00
#include <sys/sbuf.h>
Centralize the devstat handling for all GEOM disk device drivers in geom_disk.c. As a side effect this makes a lot of #include <sys/devicestat.h> lines not needed and some biofinish() calls can be reduced to biodone() again.
2003-03-08 08:01:31 +00:00
#include <sys/devicestat.h>
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
#include <machine/md_var.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <geom/geom.h>
Include <geom/geom_disk.h> not <sys/disk.h>
2003-04-01 18:57:14 +00:00
#include <geom/geom_disk.h>
Mitigate deadlock situation pending a more complete solution.
2003-03-21 22:05:33 +00:00
#include <geom/geom_int.h>
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
#include <dev/led/led.h>
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
#include <machine/bus.h>
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc {
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
struct mtx done_mtx;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct disk *dp;
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
char led[64];
uint32_t state;
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
struct mtx start_mtx;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
};
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
static g_access_t g_disk_access;
Use default method initialization on geoms.
2004-08-08 06:49:07 +00:00
static g_start_t g_disk_start;
static g_ioctl_t g_disk_ioctl;
static g_dumpconf_t g_disk_dumpconf;
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
2012-06-24 04:29:03 +00:00
static g_provgone_t g_disk_providergone;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
Make various random things static
2005-02-10 12:10:35 +00:00
static struct g_class g_disk_class = {
Introduce a symbol for the GEOM class name instead of using the ad-hoc string constant.
2013-04-15 15:55:40 +00:00
.name = G_DISK_CLASS_NAME,
Tag all geom classes in the tree with a version number.
2004-08-08 07:57:53 +00:00
.version = G_VERSION,
Use default method initialization on geoms.
2004-08-08 06:49:07 +00:00
.start = g_disk_start,
.access = g_disk_access,
.ioctl = g_disk_ioctl,
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
2012-06-24 04:29:03 +00:00
.providergone = g_disk_providergone,
Use default method initialization on geoms.
2004-08-08 06:49:07 +00:00
.dumpconf = g_disk_dumpconf,
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
};
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
SYSCTL_DECL(_kern_geom);
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. The SYSCTL_NODE macro defines a list that stores all child-elements of that node. If there's no SYSCTL_DECL macro anywhere else, there's no reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
static SYSCTL_NODE(_kern_geom, OID_AUTO, disk, CTLFLAG_RW, 0,
"GEOM_DISK stuff");
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
Introduce a init and fini member functions on a class. Use ->init() and ->fini() to handle the mutex in geom_disk.c Remove the g_add_class() function and replace it with a standardized g_modevent() function. This adds the basic infrastructure for loading/unloading GEOM classes
2003-05-31 18:13:07 +00:00
DECLARE_GEOM_CLASS(g_disk_class, g_disk);
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
static int
g_disk_access(struct g_provider *pp, int r, int w, int e)
{
struct disk *dp;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
int error;
g_trace(G_T_ACCESS, "g_disk_access(%s, %d, %d, %d)",
pp->name, r, w, e);
g_topology_assert();
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
sc = pp->private;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
if (sc == NULL || (dp = sc->dp) == NULL || dp->d_destroyed) {
Allow decreasing access count even if there is no disk anymore. This will allow closing disks that were removed while opened. Approved by: phk, scottl (mentor)
2004-02-06 23:10:49 +00:00
/*
* Allow decreasing access count even if disk is not
sys/geom: spelling fixes in comments. No functional change.
2016-04-29 20:56:58 +00:00
* available anymore.
Allow decreasing access count even if there is no disk anymore. This will allow closing disks that were removed while opened. Approved by: phk, scottl (mentor)
2004-02-06 23:10:49 +00:00
*/
if (r <= 0 && w <= 0 && e <= 0)
return (0);
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
return (ENXIO);
Allow decreasing access count even if there is no disk anymore. This will allow closing disks that were removed while opened. Approved by: phk, scottl (mentor)
2004-02-06 23:10:49 +00:00
}
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
r += pp->acr;
w += pp->acw;
e += pp->ace;
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
error = 0;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
if ((pp->acr + pp->acw + pp->ace) == 0 && (r + w + e) > 0) {
NO_GEOM cleanup: Retire the "dev_t" centric version of the disk mini-layer. Remove now unneeded linkage field in dev_t and struct disk.
2003-02-28 10:02:02 +00:00
if (dp->d_open != NULL) {
error = dp->d_open(dp);
Reduce the noise when plugging in (USB) mass storage devices, like a 4 port flash card reader. Also remove an 'Opened da0 -> <random number>' which is not needed on a daily basis (available through bootverbose). Reviewed by: phk, ken MFC after: 1 week
2007-02-21 07:45:02 +00:00
if (bootverbose && error != 0)
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
printf("Opened disk %s -> %d\n",
pp->name, error);
Don't update provider properties and don't set DISKFLAG_OPEN if d_open() disk method call returned error. GEOM considers devices in such case as still closed, and won't call symmetric d_close() for them.
2013-06-11 10:06:07 +00:00
if (error != 0)
return (error);
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
}
Now that the sectorsize and mediasize are properties of the provider, don't take the detour over the I/O path to discover them using getattr(), we can just pick them out directly. Do note though, that for now they are only valid after the first open of the underlying disk device due compatibility with the old disk_create() API. This will change in the future so they will always be valid. Sponsored by: DARPA & NAI Labs.
2002-10-20 20:28:24 +00:00
pp->sectorsize = dp->d_sectorsize;
Check disk->d_maxsize/dev->si_iosize_max at open time rather than in strategy. Printf a warning and use DFLTPHYS if the drive has not set a size.
2003-02-11 21:23:34 +00:00
if (dp->d_maxsize == 0) {
printf("WARNING: Disk drive %s%d has no d_maxsize\n",
dp->d_name, dp->d_unit);
dp->d_maxsize = DFLTPHYS;
}
Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940. Ensure that d_delmaxsize is always set, removing init to 0 which could cause future issues if use cases change. Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased up to the calculated max after being reduced. MFC after: 1 day X-MFC-With: r249940
2013-07-03 23:46:30 +00:00
if (dp->d_delmaxsize == 0) {
if (bootverbose && dp->d_flags & DISKFLAG_CANDELETE) {
printf("WARNING: Disk drive %s%d has no "
"d_delmaxsize\n", dp->d_name, dp->d_unit);
Teach GEOM and CAM about the difference between the max "size" of r/w and delete requests. sys/geom/geom_disk.h: - Added d_delmaxsize which represents the maximum size of individual device delete requests in bytes. This can be used by devices to inform geom of their size limitations regarding delete operations which are generally different from the read / write limits as data is not usually transferred from the host to physical device. sys/geom/geom_disk.c: - Use new d_delmaxsize to calculate the size of chunks passed through to the underlying strategy during deletes instead of using read / write optimised values. This defaults to d_maxsize if unset (0). - Moved d_maxsize default up so it can be used to default d_delmaxsize sys/cam/ata/ata_da.c: - Added d_delmaxsize calculations for TRIM and CFA sys/cam/scsi/scsi_da.c: - Added re-calculation of d_delmaxsize whenever delete_method is set. - Added kern.cam.da.X.delete_max sysctl which allows the max size for delete requests to be limited. This is useful in preventing timeouts on devices who's delete methods are slow. It should be noted that this limit is reset then the device delete method is changed and that it can only be lowered not increased from the device max. Reviewed by: mav Approved by: pjd (mentor)
2013-04-26 16:22:54 +00:00
}
Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940. Ensure that d_delmaxsize is always set, removing init to 0 which could cause future issues if use cases change. Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased up to the calculated max after being reduced. MFC after: 1 day X-MFC-With: r249940
2013-07-03 23:46:30 +00:00
dp->d_delmaxsize = dp->d_maxsize;
Teach GEOM and CAM about the difference between the max "size" of r/w and delete requests. sys/geom/geom_disk.h: - Added d_delmaxsize which represents the maximum size of individual device delete requests in bytes. This can be used by devices to inform geom of their size limitations regarding delete operations which are generally different from the read / write limits as data is not usually transferred from the host to physical device. sys/geom/geom_disk.c: - Use new d_delmaxsize to calculate the size of chunks passed through to the underlying strategy during deletes instead of using read / write optimised values. This defaults to d_maxsize if unset (0). - Moved d_maxsize default up so it can be used to default d_delmaxsize sys/cam/ata/ata_da.c: - Added d_delmaxsize calculations for TRIM and CFA sys/cam/scsi/scsi_da.c: - Added re-calculation of d_delmaxsize whenever delete_method is set. - Added kern.cam.da.X.delete_max sysctl which allows the max size for delete requests to be limited. This is useful in preventing timeouts on devices who's delete methods are slow. It should be noted that this limit is reset then the device delete method is changed and that it can only be lowered not increased from the device max. Reviewed by: mav Approved by: pjd (mentor)
2013-04-26 16:22:54 +00:00
}
pp->stripeoffset = dp->d_stripeoffset;
pp->stripesize = dp->d_stripesize;
dp->d_flags |= DISKFLAG_OPEN;
Do not invoke resize event if initial disk size is zero. Some disks report the size only after first opening. And due to the events are asynchronous, some consumers can receive this event too late and this confuses them. This partially restores previous behaviour, and at the same time this should fix the problem, when already opened provider loses resize event. PR: 211028 MFC after: 3 weeks
2016-08-01 20:54:54 +00:00
/*
* Do not invoke resize event when initial size was zero.
* Some disks report its size only after first opening.
*/
if (pp->mediasize == 0)
pp->mediasize = dp->d_mediasize;
else
g_resize_provider(pp, dp->d_mediasize);
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
} else if ((pp->acr + pp->acw + pp->ace) > 0 && (r + w + e) == 0) {
NO_GEOM cleanup: Retire the "dev_t" centric version of the disk mini-layer. Remove now unneeded linkage field in dev_t and struct disk.
2003-02-28 10:02:02 +00:00
if (dp->d_close != NULL) {
error = dp->d_close(dp);
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
if (error != 0)
printf("Closed disk %s -> %d\n",
pp->name, error);
}
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
sc->state = G_STATE_ACTIVE;
if (sc->led[0] != 0)
led_set(sc->led, "0");
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
dp->d_flags &= ~DISKFLAG_OPEN;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
}
return (error);
}
Make kernel dumps work with GEOM. Notice that if the device on which the dump is set is destroyed for any reason, the dump setting is lost. This in particular will happen in the case of spoilage. For instance if you set dump on ad0s1b and open ad0 for writing, ad0s* will be spoilt and the dump setting lost. See geom(4) for more about spoiling. Sponsored by: DARPA & NAI Labs.
2002-04-19 09:24:12 +00:00
static void
g_disk_kerneldump(struct bio *bp, struct disk *dp)
MFgraid/head r217827: Change BIO_GETATTR("GEOM::kerneldump") API to make set_dumper() called by consumer (geom_dev) instead of provider (geom_disk). This allows any geom insert it's code into the dump call chain, implementing more sophisticated functionality then just disk partitioning.
2011-03-24 08:37:48 +00:00
{
Make kernel dumps work with GEOM. Notice that if the device on which the dump is set is destroyed for any reason, the dump setting is lost. This in particular will happen in the case of spoilage. For instance if you set dump on ad0s1b and open ad0 for writing, ad0s* will be spoilt and the dump setting lost. See geom(4) for more about spoiling. Sponsored by: DARPA & NAI Labs.
2002-04-19 09:24:12 +00:00
struct g_kerneldump *gkd;
Properly conditionalize a debugging printf. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:06:19 +00:00
struct g_geom *gp;
Make kernel dumps work with GEOM. Notice that if the device on which the dump is set is destroyed for any reason, the dump setting is lost. This in particular will happen in the case of spoilage. For instance if you set dump on ad0s1b and open ad0 for writing, ad0s* will be spoilt and the dump setting lost. See geom(4) for more about spoiling. Sponsored by: DARPA & NAI Labs.
2002-04-19 09:24:12 +00:00
gkd = (struct g_kerneldump*)bp->bio_data;
Properly conditionalize a debugging printf. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:06:19 +00:00
gp = bp->bio_to->geom;
Fix spelling error in g_trace() call. Sponsored by: EMC / Isilon Storage Division MFC after: 1 week
2014-04-10 17:00:44 +00:00
g_trace(G_T_TOPOLOGY, "g_disk_kerneldump(%s, %jd, %jd)",
Properly conditionalize a debugging printf. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:06:19 +00:00
gp->name, (intmax_t)gkd->offset, (intmax_t)gkd->length);
Return ENODEV in case the driver has no dump routine.
2003-09-29 07:44:23 +00:00
if (dp->d_dump == NULL) {
g_io_deliver(bp, ENODEV);
return;
}
MFgraid/head r217827: Change BIO_GETATTR("GEOM::kerneldump") API to make set_dumper() called by consumer (geom_dev) instead of provider (geom_disk). This allows any geom insert it's code into the dump call chain, implementing more sophisticated functionality then just disk partitioning.
2011-03-24 08:37:48 +00:00
gkd->di.dumper = dp->d_dump;
gkd->di.priv = dp;
gkd->di.blocksize = dp->d_sectorsize;
gkd->di.maxiosize = dp->d_maxsize;
gkd->di.mediaoffset = gkd->offset;
When dumping to a unpartitioned disk, make sure to chop the length of the dump area accordingly. Run into by: scottl
2005-01-29 16:49:43 +00:00
if ((gkd->offset + gkd->length) > dp->d_mediasize)
gkd->length = dp->d_mediasize - gkd->offset;
MFgraid/head r217827: Change BIO_GETATTR("GEOM::kerneldump") API to make set_dumper() called by consumer (geom_dev) instead of provider (geom_disk). This allows any geom insert it's code into the dump call chain, implementing more sophisticated functionality then just disk partitioning.
2011-03-24 08:37:48 +00:00
gkd->di.mediasize = gkd->length;
g_io_deliver(bp, 0);
Make kernel dumps work with GEOM. Notice that if the device on which the dump is set is destroyed for any reason, the dump setting is lost. This in particular will happen in the case of spoilage. For instance if you set dump on ad0s1b and open ad0 for writing, ad0s* will be spoilt and the dump setting lost. See geom(4) for more about spoiling. Sponsored by: DARPA & NAI Labs.
2002-04-19 09:24:12 +00:00
}
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
static void
g_disk_setstate(struct bio *bp, struct g_disk_softc *sc)
{
const char *cmd;
memcpy(&sc->state, bp->bio_data, sizeof(sc->state));
if (sc->led[0] != 0) {
switch (sc->state) {
case G_STATE_FAILED:
cmd = "1";
break;
case G_STATE_REBUILD:
cmd = "f5";
break;
case G_STATE_RESYNC:
cmd = "f1";
break;
default:
cmd = "0";
break;
}
led_set(sc->led, cmd);
}
g_io_deliver(bp, 0);
}
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
static void
g_disk_done(struct bio *bp)
{
MFprojects/camlock r254905: Introduce new function devstat_end_transaction_bio_bt(), adding new argument to specify present time. Use this function to move binuptime() out of lock, substantially reducing lock congestion when slow timecounter is used.
2013-10-16 09:12:40 +00:00
struct bintime now;
Centralize the devstat handling for all GEOM disk device drivers in geom_disk.c. As a side effect this makes a lot of #include <sys/devicestat.h> lines not needed and some biofinish() calls can be reduced to biodone() again.
2003-03-08 08:01:31 +00:00
struct bio *bp2;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
Make a mutex to stop the race coming into geom_disk's done routine. Cut up requests into smaller bits if they are longer than the drivers disk->d_maxsize or dev->si_iosize_max. Properly handle the race condition when using g_clone_bio() is used without having the single-threadedness of g_down/g_up secure locking.
2003-02-11 18:32:31 +00:00
/* See "notes" for why we need a mutex here */
/* XXX: will witness accept a mix of Giant/unGiant drivers here ? */
Centralize the devstat handling for all GEOM disk device drivers in geom_disk.c. As a side effect this makes a lot of #include <sys/devicestat.h> lines not needed and some biofinish() calls can be reduced to biodone() again.
2003-03-08 08:01:31 +00:00
bp2 = bp->bio_parent;
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
sc = bp2->bio_to->private;
bp->bio_completed = bp->bio_length - bp->bio_resid;
MFprojects/camlock r254905: Introduce new function devstat_end_transaction_bio_bt(), adding new argument to specify present time. Use this function to move binuptime() out of lock, substantially reducing lock congestion when slow timecounter is used.
2013-10-16 09:12:40 +00:00
binuptime(&now);
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
mtx_lock(&sc->done_mtx);
Centralize the devstat handling for all GEOM disk device drivers in geom_disk.c. As a side effect this makes a lot of #include <sys/devicestat.h> lines not needed and some biofinish() calls can be reduced to biodone() again.
2003-03-08 08:01:31 +00:00
if (bp2->bio_error == 0)
bp2->bio_error = bp->bio_error;
bp2->bio_completed += bp->bio_completed;
Add support for managing Shingled Magnetic Recording (SMR) drives. This change includes support for SCSI SMR drives (which conform to the Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to the Zoned ATA Command Set or ZAC spec) behind SAS expanders. This includes full management support through the GEOM BIO interface, and through a new userland utility, zonectl(8), and through camcontrol(8). This is now ready for filesystems to use to detect and manage zoned drives. (There is no work in progress that I know of to use this for ZFS or UFS, if anyone is interested, let me know and I may have some suggestions.) Also, improve ATA command passthrough and dispatch support, both via ATA and ATA passthrough over SCSI. Also, add support to camcontrol(8) for the ATA Extended Power Conditions feature set. You can now manage ATA device power states, and set various idle time thresholds for a drive to enter lower power states. Note that this change cannot be MFCed in full, because it depends on changes to the struct bio API that break compatilibity. In order to avoid breaking the stable API, only changes that don't touch or depend on the struct bio changes can be merged. For example, the camcontrol(8) changes don't depend on the new bio API, but zonectl(8) and the probe changes to the da(4) and ada(4) drivers do depend on it. Also note that the SMR changes have not yet been tested with an actual SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT layer, so any testing help would be appreciated. These changes have been tested with Seagate Host Aware SATA drives attached to both SAS and SATA controllers. Also, I do not have any SATA Host Managed devices, and I suspect that it may take additional (hopefully minor) changes to support them. Thanks to Seagate for supplying the test hardware and answering questions. sbin/camcontrol/Makefile: Add epc.c and zone.c. sbin/camcontrol/camcontrol.8: Document the zone and epc subcommands. sbin/camcontrol/camcontrol.c: Add the zone and epc subcommands. Add auxiliary register support to build_ata_cmd(). Make sure to set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA flags as appropriate for ATA commands. Add a new get_ata_status() function to parse ATA result from SCSI sense descriptors (for ATA passthrough over SCSI) and ATA I/O requests. sbin/camcontrol/camcontrol.h: Update the build_ata_cmd() prototype Add get_ata_status(), zone(), and epc(). sbin/camcontrol/epc.c: Support for ATA Extended Power Conditions features. This includes support for all features documented in the ACS-4 Revision 12 specification from t13.org (dated February 18, 2016). The EPC feature set allows putting a drive into a power power mode immediately, or setting timeouts so that the drive will automatically enter progressively lower power states after various idle times. sbin/camcontrol/fwdownload.c: Update the firmware download code for the new build_ata_cmd() arguments. sbin/camcontrol/zone.c: Implement support for Shingled Magnetic Recording (SMR) drives via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA Command Set (ZAC). These specs were developed in concert, and are functionally identical. The primary differences are due to SCSI and ATA differences. (SCSI is big endian, ATA is little endian, for example.) This includes support for all commands defined in the ZBC and ZAC specs. sys/cam/ata/ata_all.c: Decode a number of additional ATA command names in ata_op_string(). Add a new CCB building function, ata_read_log(). Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building functions. These support both DMA and NCQ encapsulation. sys/cam/ata/ata_all.h: Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and ata_zac_mgmt_in(). sys/cam/ata/ata_da.c: Revamp the ada(4) driver to support zoned devices. Add four new probe states to gather information needed for zone support. Add a new adasetflags() function to avoid duplication of large blocks of flag setting between the async handler and register functions. Add new sysctl variables that describe zone support and paramters. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. sys/cam/scsi/scsi_all.c: Add command descriptions for the ZBC IN/OUT commands. Add descriptions for ZBC Host Managed devices. Add a new function, scsi_ata_pass() to do ATA passthrough over SCSI. This will eventually replace scsi_ata_pass_16() -- it can create the 12, 16, and 32-byte variants of the ATA PASS-THROUGH command, and supports setting all of the registers defined as of SAT-4, Revision 5 (March 11, 2016). Change scsi_ata_identify() to use scsi_ata_pass() instead of scsi_ata_pass_16(). Add a new scsi_ata_read_log() function to facilitate reading ATA logs via SCSI. sys/cam/scsi/scsi_all.h: Add the new ATA PASS-THROUGH(32) command CDB. Add extended and variable CDB opcodes. Add Zoned Block Device Characteristics VPD page. Add ATA Return SCSI sense descriptor. Add prototypes for scsi_ata_read_log() and scsi_ata_pass(). sys/cam/scsi/scsi_da.c: Revamp the da(4) driver to support zoned devices. Add five new probe states, four of which are needed for ATA devices. Add five new sysctl variables that describe zone support and parameters. The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC devices when they are attached via a SCSI to ATA Translation (SAT) layer. Since ZBC -> ZAC translation is a new feature in the T10 SAT-4 spec, most SATA drives will be supported via ATA commands sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will prefer the ZBC interface, if it is available, for performance reasons, but will use the ATA PASS-THROUGH interface to the ZAC command set if the SAT layer doesn't support translation yet. As I mentioned above, ZBC command support is untested. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. Add scsi_zbc_in() and scsi_zbc_out() CCB building functions. Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB building functions. Note that these have return values, unlike almost all other CCB building functions in CAM. The reason is that they can fail, depending upon the particular combination of input parameters. The primary failure case is if the user wants NCQ, but fails to specify additional CDB storage. NCQ requires using the 32-byte version of the SCSI ATA PASS-THROUGH command, and the current CAM CDB size is 16 bytes. sys/cam/scsi/scsi_da.h: Add ZBC IN and ZBC OUT CDBs and opcodes. Add SCSI Report Zones data structures. Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and scsi_ata_zac_mgmt_in() prototypes. sys/dev/ahci/ahci.c: Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver. ahci_setup_fis() previously set the top bits of the sector count register in the FIS to 0 for FPDMA commands. This is okay for read and write, because the PRIO field is in the only thing in those bits, and we don't implement that further up the stack. But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that byte, so it needs to be transmitted to the drive. In ahci_setup_fis(), always set the the top 8 bits of the sector count register. We need it in both the standard and NCQ / FPDMA cases. sys/geom/eli/g_eli.c: Pass BIO_ZONE commands through the GELI class. sys/geom/geom.h: Add g_io_zonecmd() prototype. sys/geom/geom_dev.c: Add new DIOCZONECMD ioctl, which allows sending zone commands to disks. sys/geom/geom_disk.c: Add support for BIO_ZONE commands. sys/geom/geom_disk.h: Add a new flag, DISKFLAG_CANZONE, that indicates that a given GEOM disk client can handle BIO_ZONE commands. sys/geom/geom_io.c: Add a new function, g_io_zonecmd(), that handles execution of BIO_ZONE commands. Add permissions check for BIO_ZONE commands. Add command decoding for BIO_ZONE commands. sys/geom/geom_subr.c: Add DDB command decoding for BIO_ZONE commands. sys/kern/subr_devstat.c: Record statistics for REPORT ZONES commands. Note that the number of bytes transferred for REPORT ZONES won't quite match what is received from the harware. This is because we're necessarily counting bytes coming from the da(4) / ada(4) drivers, which are using the disk_zone.h interface to communicate up the stack. The structure sizes it uses are slightly different than the SCSI and ATA structure sizes. sys/sys/ata.h: Add many bit and structure definitions for ZAC, NCQ, and EPC command support. sys/sys/bio.h: Convert the bio_cmd field to a straight enumeration. This will yield more space for additional commands in the future. After change r297955 and other related changes, this is now possible. Converting to an enumeration will also prevent use as a bitmask in the future. sys/sys/disk.h: Define the DIOCZONECMD ioctl. sys/sys/disk_zone.h: Add a new API for managing zoned disks. This is very close to the SCSI ZBC and ATA ZAC standards, but uses integers in native byte order instead of big endian (SCSI) or little endian (ATA) byte arrays. This is intended to offer to the complete feature set of the ZBC and ZAC disk management without requiring the application developer to include SCSI or ATA headers. We also use one set of headers for ioctl consumers and kernel bio-level consumers. sys/sys/param.h: Bump __FreeBSD_version for sys/bio.h command changes, and inclusion of SMR support. usr.sbin/Makefile: Add the zonectl utility. usr.sbin/diskinfo/diskinfo.c Add disk zoning capability to the 'diskinfo -v' output. usr.sbin/zonectl/Makefile: Add zonectl makefile. usr.sbin/zonectl/zonectl.8 zonectl(8) man page. usr.sbin/zonectl/zonectl.c The zonectl(8) utility. This allows managing SCSI or ATA zoned disks via the disk_zone.h API. You can report zones, reset write pointers, get parameters, etc. Sponsored by: Spectra Logic Differential Revision: https://reviews.freebsd.org/D6147 Reviewed by: wblock (documentation)
2016-05-19 14:08:36 +00:00
Don't assume that bio_cmd is bit mask. Differential Revision: https://reviews.freebsd.org/D5593
2016-03-10 06:25:31 +00:00
switch (bp->bio_cmd) {
Add support for managing Shingled Magnetic Recording (SMR) drives. This change includes support for SCSI SMR drives (which conform to the Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to the Zoned ATA Command Set or ZAC spec) behind SAS expanders. This includes full management support through the GEOM BIO interface, and through a new userland utility, zonectl(8), and through camcontrol(8). This is now ready for filesystems to use to detect and manage zoned drives. (There is no work in progress that I know of to use this for ZFS or UFS, if anyone is interested, let me know and I may have some suggestions.) Also, improve ATA command passthrough and dispatch support, both via ATA and ATA passthrough over SCSI. Also, add support to camcontrol(8) for the ATA Extended Power Conditions feature set. You can now manage ATA device power states, and set various idle time thresholds for a drive to enter lower power states. Note that this change cannot be MFCed in full, because it depends on changes to the struct bio API that break compatilibity. In order to avoid breaking the stable API, only changes that don't touch or depend on the struct bio changes can be merged. For example, the camcontrol(8) changes don't depend on the new bio API, but zonectl(8) and the probe changes to the da(4) and ada(4) drivers do depend on it. Also note that the SMR changes have not yet been tested with an actual SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT layer, so any testing help would be appreciated. These changes have been tested with Seagate Host Aware SATA drives attached to both SAS and SATA controllers. Also, I do not have any SATA Host Managed devices, and I suspect that it may take additional (hopefully minor) changes to support them. Thanks to Seagate for supplying the test hardware and answering questions. sbin/camcontrol/Makefile: Add epc.c and zone.c. sbin/camcontrol/camcontrol.8: Document the zone and epc subcommands. sbin/camcontrol/camcontrol.c: Add the zone and epc subcommands. Add auxiliary register support to build_ata_cmd(). Make sure to set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA flags as appropriate for ATA commands. Add a new get_ata_status() function to parse ATA result from SCSI sense descriptors (for ATA passthrough over SCSI) and ATA I/O requests. sbin/camcontrol/camcontrol.h: Update the build_ata_cmd() prototype Add get_ata_status(), zone(), and epc(). sbin/camcontrol/epc.c: Support for ATA Extended Power Conditions features. This includes support for all features documented in the ACS-4 Revision 12 specification from t13.org (dated February 18, 2016). The EPC feature set allows putting a drive into a power power mode immediately, or setting timeouts so that the drive will automatically enter progressively lower power states after various idle times. sbin/camcontrol/fwdownload.c: Update the firmware download code for the new build_ata_cmd() arguments. sbin/camcontrol/zone.c: Implement support for Shingled Magnetic Recording (SMR) drives via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA Command Set (ZAC). These specs were developed in concert, and are functionally identical. The primary differences are due to SCSI and ATA differences. (SCSI is big endian, ATA is little endian, for example.) This includes support for all commands defined in the ZBC and ZAC specs. sys/cam/ata/ata_all.c: Decode a number of additional ATA command names in ata_op_string(). Add a new CCB building function, ata_read_log(). Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building functions. These support both DMA and NCQ encapsulation. sys/cam/ata/ata_all.h: Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and ata_zac_mgmt_in(). sys/cam/ata/ata_da.c: Revamp the ada(4) driver to support zoned devices. Add four new probe states to gather information needed for zone support. Add a new adasetflags() function to avoid duplication of large blocks of flag setting between the async handler and register functions. Add new sysctl variables that describe zone support and paramters. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. sys/cam/scsi/scsi_all.c: Add command descriptions for the ZBC IN/OUT commands. Add descriptions for ZBC Host Managed devices. Add a new function, scsi_ata_pass() to do ATA passthrough over SCSI. This will eventually replace scsi_ata_pass_16() -- it can create the 12, 16, and 32-byte variants of the ATA PASS-THROUGH command, and supports setting all of the registers defined as of SAT-4, Revision 5 (March 11, 2016). Change scsi_ata_identify() to use scsi_ata_pass() instead of scsi_ata_pass_16(). Add a new scsi_ata_read_log() function to facilitate reading ATA logs via SCSI. sys/cam/scsi/scsi_all.h: Add the new ATA PASS-THROUGH(32) command CDB. Add extended and variable CDB opcodes. Add Zoned Block Device Characteristics VPD page. Add ATA Return SCSI sense descriptor. Add prototypes for scsi_ata_read_log() and scsi_ata_pass(). sys/cam/scsi/scsi_da.c: Revamp the da(4) driver to support zoned devices. Add five new probe states, four of which are needed for ATA devices. Add five new sysctl variables that describe zone support and parameters. The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC devices when they are attached via a SCSI to ATA Translation (SAT) layer. Since ZBC -> ZAC translation is a new feature in the T10 SAT-4 spec, most SATA drives will be supported via ATA commands sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will prefer the ZBC interface, if it is available, for performance reasons, but will use the ATA PASS-THROUGH interface to the ZAC command set if the SAT layer doesn't support translation yet. As I mentioned above, ZBC command support is untested. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. Add scsi_zbc_in() and scsi_zbc_out() CCB building functions. Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB building functions. Note that these have return values, unlike almost all other CCB building functions in CAM. The reason is that they can fail, depending upon the particular combination of input parameters. The primary failure case is if the user wants NCQ, but fails to specify additional CDB storage. NCQ requires using the 32-byte version of the SCSI ATA PASS-THROUGH command, and the current CAM CDB size is 16 bytes. sys/cam/scsi/scsi_da.h: Add ZBC IN and ZBC OUT CDBs and opcodes. Add SCSI Report Zones data structures. Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and scsi_ata_zac_mgmt_in() prototypes. sys/dev/ahci/ahci.c: Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver. ahci_setup_fis() previously set the top bits of the sector count register in the FIS to 0 for FPDMA commands. This is okay for read and write, because the PRIO field is in the only thing in those bits, and we don't implement that further up the stack. But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that byte, so it needs to be transmitted to the drive. In ahci_setup_fis(), always set the the top 8 bits of the sector count register. We need it in both the standard and NCQ / FPDMA cases. sys/geom/eli/g_eli.c: Pass BIO_ZONE commands through the GELI class. sys/geom/geom.h: Add g_io_zonecmd() prototype. sys/geom/geom_dev.c: Add new DIOCZONECMD ioctl, which allows sending zone commands to disks. sys/geom/geom_disk.c: Add support for BIO_ZONE commands. sys/geom/geom_disk.h: Add a new flag, DISKFLAG_CANZONE, that indicates that a given GEOM disk client can handle BIO_ZONE commands. sys/geom/geom_io.c: Add a new function, g_io_zonecmd(), that handles execution of BIO_ZONE commands. Add permissions check for BIO_ZONE commands. Add command decoding for BIO_ZONE commands. sys/geom/geom_subr.c: Add DDB command decoding for BIO_ZONE commands. sys/kern/subr_devstat.c: Record statistics for REPORT ZONES commands. Note that the number of bytes transferred for REPORT ZONES won't quite match what is received from the harware. This is because we're necessarily counting bytes coming from the da(4) / ada(4) drivers, which are using the disk_zone.h interface to communicate up the stack. The structure sizes it uses are slightly different than the SCSI and ATA structure sizes. sys/sys/ata.h: Add many bit and structure definitions for ZAC, NCQ, and EPC command support. sys/sys/bio.h: Convert the bio_cmd field to a straight enumeration. This will yield more space for additional commands in the future. After change r297955 and other related changes, this is now possible. Converting to an enumeration will also prevent use as a bitmask in the future. sys/sys/disk.h: Define the DIOCZONECMD ioctl. sys/sys/disk_zone.h: Add a new API for managing zoned disks. This is very close to the SCSI ZBC and ATA ZAC standards, but uses integers in native byte order instead of big endian (SCSI) or little endian (ATA) byte arrays. This is intended to offer to the complete feature set of the ZBC and ZAC disk management without requiring the application developer to include SCSI or ATA headers. We also use one set of headers for ioctl consumers and kernel bio-level consumers. sys/sys/param.h: Bump __FreeBSD_version for sys/bio.h command changes, and inclusion of SMR support. usr.sbin/Makefile: Add the zonectl utility. usr.sbin/diskinfo/diskinfo.c Add disk zoning capability to the 'diskinfo -v' output. usr.sbin/zonectl/Makefile: Add zonectl makefile. usr.sbin/zonectl/zonectl.8 zonectl(8) man page. usr.sbin/zonectl/zonectl.c The zonectl(8) utility. This allows managing SCSI or ATA zoned disks via the disk_zone.h API. You can report zones, reset write pointers, get parameters, etc. Sponsored by: Spectra Logic Differential Revision: https://reviews.freebsd.org/D6147 Reviewed by: wblock (documentation)
2016-05-19 14:08:36 +00:00
case BIO_ZONE:
bcopy(&bp->bio_zone, &bp2->bio_zone, sizeof(bp->bio_zone));
/*FALLTHROUGH*/
Don't assume that bio_cmd is bit mask. Differential Revision: https://reviews.freebsd.org/D5593
2016-03-10 06:25:31 +00:00
case BIO_READ:
case BIO_WRITE:
case BIO_DELETE:
case BIO_FLUSH:
MFprojects/camlock r254905: Introduce new function devstat_end_transaction_bio_bt(), adding new argument to specify present time. Use this function to move binuptime() out of lock, substantially reducing lock congestion when slow timecounter is used.
2013-10-16 09:12:40 +00:00
devstat_end_transaction_bio_bt(sc->dp->d_devstat, bp, &now);
Don't assume that bio_cmd is bit mask. Differential Revision: https://reviews.freebsd.org/D5593
2016-03-10 06:25:31 +00:00
break;
default:
break;
}
Centralize the devstat handling for all GEOM disk device drivers in geom_disk.c. As a side effect this makes a lot of #include <sys/devicestat.h> lines not needed and some biofinish() calls can be reduced to biodone() again.
2003-03-08 08:01:31 +00:00
bp2->bio_inbed++;
if (bp2->bio_children == bp2->bio_inbed) {
MFprojects/camlock r254907: Move g_io_deliver() out of the lock, as required for direct dispatch. Move g_destroy_bio() out too to reduce lock scope even more.
2013-10-16 09:18:01 +00:00
mtx_unlock(&sc->done_mtx);
Use devstat_{start,end}_transaction_bio(). Remember to set bio_resid correctly first.
2003-03-15 10:49:26 +00:00
bp2->bio_resid = bp2->bio_bcount - bp2->bio_completed;
Centralize the devstat handling for all GEOM disk device drivers in geom_disk.c. As a side effect this makes a lot of #include <sys/devicestat.h> lines not needed and some biofinish() calls can be reduced to biodone() again.
2003-03-08 08:01:31 +00:00
g_io_deliver(bp2, bp2->bio_error);
MFprojects/camlock r254907: Move g_io_deliver() out of the lock, as required for direct dispatch. Move g_destroy_bio() out too to reduce lock scope even more.
2013-10-16 09:18:01 +00:00
} else
mtx_unlock(&sc->done_mtx);
g_destroy_bio(bp);
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
}
Simplify the ioctl handling in GEOM. This replaces the current ioctl processing with a direct call path from geom_dev() where the ioctl arrives (from SPECFS) to any directly connected GEOM class. The inverse of the above is no longer supported. This is the situation were you have one or more intervening GEOM classes, for instance a BSDlabel on top of a MBR or PC98. If you want to issue MBR or PC98 specific ioctls, you will need to issue them on a MBR or PC98 providers. This paves the way for inviting CD's, FD's and other special cases inside GEOM.
2003-09-01 20:45:32 +00:00
static int
Pass the file->flags down to geom ioctl handlers. Reject certain ioctls if write permission is not indicated. Bump geom API version. Reported by: Ruben de Groot <mail25@bzerk.org>
2004-12-12 10:09:05 +00:00
g_disk_ioctl(struct g_provider *pp, u_long cmd, void * data, int fflag, struct thread *td)
Simplify the ioctl handling in GEOM. This replaces the current ioctl processing with a direct call path from geom_dev() where the ioctl arrives (from SPECFS) to any directly connected GEOM class. The inverse of the above is no longer supported. This is the situation were you have one or more intervening GEOM classes, for instance a BSDlabel on top of a MBR or PC98. If you want to issue MBR or PC98 specific ioctls, you will need to issue them on a MBR or PC98 providers. This paves the way for inviting CD's, FD's and other special cases inside GEOM.
2003-09-01 20:45:32 +00:00
{
struct disk *dp;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
Simplify the ioctl handling in GEOM. This replaces the current ioctl processing with a direct call path from geom_dev() where the ioctl arrives (from SPECFS) to any directly connected GEOM class. The inverse of the above is no longer supported. This is the situation were you have one or more intervening GEOM classes, for instance a BSDlabel on top of a MBR or PC98. If you want to issue MBR or PC98 specific ioctls, you will need to issue them on a MBR or PC98 providers. This paves the way for inviting CD's, FD's and other special cases inside GEOM.
2003-09-01 20:45:32 +00:00
int error;
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
sc = pp->private;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
dp = sc->dp;
Simplify the ioctl handling in GEOM. This replaces the current ioctl processing with a direct call path from geom_dev() where the ioctl arrives (from SPECFS) to any directly connected GEOM class. The inverse of the above is no longer supported. This is the situation were you have one or more intervening GEOM classes, for instance a BSDlabel on top of a MBR or PC98. If you want to issue MBR or PC98 specific ioctls, you will need to issue them on a MBR or PC98 providers. This paves the way for inviting CD's, FD's and other special cases inside GEOM.
2003-09-01 20:45:32 +00:00
if (dp->d_ioctl == NULL)
return (ENOIOCTL);
Pass the file->flags down to geom ioctl handlers. Reject certain ioctls if write permission is not indicated. Bump geom API version. Reported by: Ruben de Groot <mail25@bzerk.org>
2004-12-12 10:09:05 +00:00
error = dp->d_ioctl(dp, cmd, data, fflag, td);
Improve style a bit. MFC after: 3 days
2011-10-25 14:05:39 +00:00
return (error);
Simplify the ioctl handling in GEOM. This replaces the current ioctl processing with a direct call path from geom_dev() where the ioctl arrives (from SPECFS) to any directly connected GEOM class. The inverse of the above is no longer supported. This is the situation were you have one or more intervening GEOM classes, for instance a BSDlabel on top of a MBR or PC98. If you want to issue MBR or PC98 specific ioctls, you will need to issue them on a MBR or PC98 providers. This paves the way for inviting CD's, FD's and other special cases inside GEOM.
2003-09-01 20:45:32 +00:00
}
Fix g_disk_vlist_limit() to work properly with deletes. Add a new bp argument to g_disk_maxsegs(), and add a new function, g_disk_maxsize() tha will properly determine the maximum I/O size for a delete or non-delete bio. Submitted by: will MFC after: 1 week Sponsored by: Spectra Logic
2015-12-04 03:38:35 +00:00
static off_t
g_disk_maxsize(struct disk *dp, struct bio *bp)
{
if (bp->bio_cmd == BIO_DELETE)
return (dp->d_delmaxsize);
return (dp->d_maxsize);
}
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
static int
Fix g_disk_vlist_limit() to work properly with deletes. Add a new bp argument to g_disk_maxsegs(), and add a new function, g_disk_maxsize() tha will properly determine the maximum I/O size for a delete or non-delete bio. Submitted by: will MFC after: 1 week Sponsored by: Spectra Logic
2015-12-04 03:38:35 +00:00
g_disk_maxsegs(struct disk *dp, struct bio *bp)
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
{
Fix g_disk_vlist_limit() to work properly with deletes. Add a new bp argument to g_disk_maxsegs(), and add a new function, g_disk_maxsize() tha will properly determine the maximum I/O size for a delete or non-delete bio. Submitted by: will MFC after: 1 week Sponsored by: Spectra Logic
2015-12-04 03:38:35 +00:00
return ((g_disk_maxsize(dp, bp) / PAGE_SIZE) + 1);
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
}
static void
g_disk_advance(struct disk *dp, struct bio *bp, off_t off)
{
bp->bio_offset += off;
bp->bio_length -= off;
if ((bp->bio_flags & BIO_VLIST) != 0) {
bus_dma_segment_t *seg, *end;
seg = (bus_dma_segment_t *)bp->bio_data;
end = (bus_dma_segment_t *)bp->bio_data + bp->bio_ma_n;
off += bp->bio_ma_offset;
while (off >= seg->ds_len) {
KASSERT((seg != end),
("vlist request runs off the end"));
off -= seg->ds_len;
seg++;
}
bp->bio_ma_offset = off;
bp->bio_ma_n = end - seg;
bp->bio_data = (void *)seg;
} else if ((bp->bio_flags & BIO_UNMAPPED) != 0) {
bp->bio_ma += off / PAGE_SIZE;
bp->bio_ma_offset += off;
bp->bio_ma_offset %= PAGE_SIZE;
bp->bio_ma_n -= off / PAGE_SIZE;
} else {
bp->bio_data += off;
}
}
static void
g_disk_seg_limit(bus_dma_segment_t *seg, off_t *poffset,
off_t *plength, int *ppages)
{
uintptr_t seg_page_base;
uintptr_t seg_page_end;
off_t offset;
off_t length;
int seg_pages;
offset = *poffset;
length = *plength;
if (length > seg->ds_len - offset)
length = seg->ds_len - offset;
seg_page_base = trunc_page(seg->ds_addr + offset);
seg_page_end = round_page(seg->ds_addr + offset + length);
seg_pages = (seg_page_end - seg_page_base) >> PAGE_SHIFT;
if (seg_pages > *ppages) {
seg_pages = *ppages;
length = (seg_page_base + (seg_pages << PAGE_SHIFT)) -
(seg->ds_addr + offset);
}
*poffset = 0;
*plength -= length;
*ppages -= seg_pages;
}
static off_t
g_disk_vlist_limit(struct disk *dp, struct bio *bp, bus_dma_segment_t **pendseg)
{
bus_dma_segment_t *seg, *end;
off_t residual;
off_t offset;
int pages;
seg = (bus_dma_segment_t *)bp->bio_data;
end = (bus_dma_segment_t *)bp->bio_data + bp->bio_ma_n;
residual = bp->bio_length;
offset = bp->bio_ma_offset;
Fix g_disk_vlist_limit() to work properly with deletes. Add a new bp argument to g_disk_maxsegs(), and add a new function, g_disk_maxsize() tha will properly determine the maximum I/O size for a delete or non-delete bio. Submitted by: will MFC after: 1 week Sponsored by: Spectra Logic
2015-12-04 03:38:35 +00:00
pages = g_disk_maxsegs(dp, bp);
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
while (residual != 0 && pages != 0) {
KASSERT((seg != end),
("vlist limit runs off the end"));
g_disk_seg_limit(seg, &offset, &residual, &pages);
seg++;
}
if (pendseg != NULL)
*pendseg = seg;
return (residual);
}
static bool
g_disk_limit(struct disk *dp, struct bio *bp)
{
bool limited = false;
Fix a style issue in g_disk_limit(). Noticed by: bdrewery MFC after: 1 week
2015-12-04 03:44:12 +00:00
off_t maxsz;
maxsz = g_disk_maxsize(dp, bp);
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
/*
* XXX: If we have a stripesize we should really use it here.
* Care should be taken in the delete case if this is done
* as deletes can be very sensitive to size given how they
* are processed.
*/
Fix g_disk_vlist_limit() to work properly with deletes. Add a new bp argument to g_disk_maxsegs(), and add a new function, g_disk_maxsize() tha will properly determine the maximum I/O size for a delete or non-delete bio. Submitted by: will MFC after: 1 week Sponsored by: Spectra Logic
2015-12-04 03:38:35 +00:00
if (bp->bio_length > maxsz) {
bp->bio_length = maxsz;
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
limited = true;
}
if ((bp->bio_flags & BIO_VLIST) != 0) {
bus_dma_segment_t *firstseg, *endseg;
off_t residual;
firstseg = (bus_dma_segment_t*)bp->bio_data;
residual = g_disk_vlist_limit(dp, bp, &endseg);
if (residual != 0) {
bp->bio_ma_n = endseg - firstseg;
bp->bio_length -= residual;
limited = true;
}
} else if ((bp->bio_flags & BIO_UNMAPPED) != 0) {
bp->bio_ma_n =
howmany(bp->bio_ma_offset + bp->bio_length, PAGE_SIZE);
}
return (limited);
}
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
static void
g_disk_start(struct bio *bp)
{
Make a mutex to stop the race coming into geom_disk's done routine. Cut up requests into smaller bits if they are longer than the drivers disk->d_maxsize or dev->si_iosize_max. Properly handle the race condition when using g_clone_bio() is used without having the single-threadedness of g_down/g_up secure locking.
2003-02-11 18:32:31 +00:00
struct bio *bp2, *bp3;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
struct disk *dp;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
Add a generic and general ioctl pass-through mechanism. It should now be posible to issue ioctls to SCSI CD drives.
2002-03-16 09:24:19 +00:00
int error;
Revert somewhat hackish geom_disk optimization, committed as part of r256880, and the following r273143 commit, supposed to workaround introduced issue by quite innocent-looking change. While there is no clear understanding why, but r273143 is accused in data corruption in some environments with high I/O load. I personally don't see any problem in that commit, and possibly it is just a trigger to some other bug somewhere, but better safe then sorry for now. Requested by: scottl@ MFC after: 3 days
2014-10-25 15:16:19 +00:00
off_t off;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
Add BUF_TRACKING and FULL_BUF_TRACKING buffer debugging Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code. This can be handy in tracking down what code touched hung bios and bufs last. The full history is especially useful, but adds enough bloat that it shouldn't be enabled in release builds. Function names (or arbitrary string constants) are tracked in a fixed-size ring in bufs. Bios gain a pointer to the upper buf for tracking. SCSI CCBs gain a pointer to the upper bio for tracking. Reviewed by: markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D8366
2016-10-31 23:09:52 +00:00
biotrack(bp, __func__);
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
sc = bp->bio_to->private;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
if (sc == NULL || (dp = sc->dp) == NULL || dp->d_destroyed) {
Return ENXIO if the softc pointer is NULL, in all likelyhood the disk is in the process of disappearing. Approved by: re/rwats*
2003-05-21 18:52:29 +00:00
g_io_deliver(bp, ENXIO);
After rejecting the bio request early, return instead of panicing. Found by: Coverity (ID#450)
2005-03-18 07:01:31 +00:00
return;
}
Correctly deal with non-DEVBSIZE drives. Allow BIO_DELETE through too. This fixes swap-backed md(4) devices. Sponsored by: DARPA & NAI Labs.
2002-10-07 07:15:37 +00:00
error = EJUSTRETURN;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
switch(bp->bio_cmd) {
Correctly deal with non-DEVBSIZE drives. Allow BIO_DELETE through too. This fixes swap-backed md(4) devices. Sponsored by: DARPA & NAI Labs.
2002-10-07 07:15:37 +00:00
case BIO_DELETE:
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
if (!(dp->d_flags & DISKFLAG_CANDELETE)) {
Allow upper layers to discover than BIO_DELETE and/or BIO_FLUSH is not supported by returning EOPNOTSUPP instead of 0 or ENODEV. MFC after: 3 days
2011-10-25 14:07:17 +00:00
error = EOPNOTSUPP;
Correctly deal with non-DEVBSIZE drives. Allow BIO_DELETE through too. This fixes swap-backed md(4) devices. Sponsored by: DARPA & NAI Labs.
2002-10-07 07:15:37 +00:00
break;
}
/* fall-through */
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
case BIO_READ:
case BIO_WRITE:
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
KASSERT((dp->d_flags & DISKFLAG_UNMAPPED_BIO) != 0 ||
(bp->bio_flags & BIO_UNMAPPED) == 0,
("unmapped bio not supported by disk %s", dp->d_name));
Make a mutex to stop the race coming into geom_disk's done routine. Cut up requests into smaller bits if they are longer than the drivers disk->d_maxsize or dev->si_iosize_max. Properly handle the race condition when using g_clone_bio() is used without having the single-threadedness of g_down/g_up secure locking.
2003-02-11 18:32:31 +00:00
off = 0;
bp3 = NULL;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
bp2 = g_clone_bio(bp);
Check return value of g_clone_bio().
2003-02-06 22:00:47 +00:00
if (bp2 == NULL) {
error = ENOMEM;
break;
}
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
for (;;) {
if (g_disk_limit(dp, bp2)) {
off += bp2->bio_length;
Make a mutex to stop the race coming into geom_disk's done routine. Cut up requests into smaller bits if they are longer than the drivers disk->d_maxsize or dev->si_iosize_max. Properly handle the race condition when using g_clone_bio() is used without having the single-threadedness of g_down/g_up secure locking.
2003-02-11 18:32:31 +00:00
/*
* To avoid a race, we need to grab the next bio
* before we schedule this one. See "notes".
*/
bp3 = g_clone_bio(bp);
if (bp3 == NULL)
bp->bio_error = ENOMEM;
}
bp2->bio_done = g_disk_done;
bp2->bio_pblkno = bp2->bio_offset / dp->d_sectorsize;
bp2->bio_bcount = bp2->bio_length;
bp2->bio_disk = dp;
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
mtx_lock(&sc->start_mtx);
Move some devstat collection to below where large IO operations are chopped up. This make iostat report operations passed down to the device driver instead of operations passed down to GEOM disk. The transfer size limit imposed by the device driver is no longer hidden, improving the correlation between iostat output and device driver workload.
2005-09-30 17:32:08 +00:00
devstat_start_transaction_bio(dp->d_devstat, bp2);
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
mtx_unlock(&sc->start_mtx);
Make a mutex to stop the race coming into geom_disk's done routine. Cut up requests into smaller bits if they are longer than the drivers disk->d_maxsize or dev->si_iosize_max. Properly handle the race condition when using g_clone_bio() is used without having the single-threadedness of g_down/g_up secure locking.
2003-02-11 18:32:31 +00:00
dp->d_strategy(bp2);
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
if (bp3 == NULL)
break;
Make a mutex to stop the race coming into geom_disk's done routine. Cut up requests into smaller bits if they are longer than the drivers disk->d_maxsize or dev->si_iosize_max. Properly handle the race condition when using g_clone_bio() is used without having the single-threadedness of g_down/g_up secure locking.
2003-02-11 18:32:31 +00:00
bp2 = bp3;
bp3 = NULL;
Add asynchronous command support to the pass(4) driver, and the new camdd(8) utility. CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and completed CCBs may be retrieved via the CAMIOGET ioctl. User processes can use poll(2) or kevent(2) to get notification when I/O has completed. While the existing CAMIOCOMMAND blocking ioctl interface only supports user virtual data pointers in a CCB (generally only one per CCB), the new CAMIOQUEUE ioctl supports user virtual and physical address pointers, as well as user virtual and physical scatter/gather lists. This allows user applications to have more flexibility in their data handling operations. Kernel memory for data transferred via the queued interface is allocated from the zone allocator in MAXPHYS sized chunks, and user data is copied in and out. This is likely faster than the vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in configurations with many processors (there are more TLB shootdowns caused by the mapping/unmapping operation) but may not be as fast as running with unmapped I/O. The new memory handling model for user requests also allows applications to send CCBs with request sizes that are larger than MAXPHYS. The pass(4) driver now limits queued requests to the I/O size listed by the SIM driver in the maxio field in the Path Inquiry (XPT_PATH_INQ) CCB. There are some things things would be good to add: 1. Come up with a way to do unmapped I/O on multiple buffers. Currently the unmapped I/O interface operates on a struct bio, which includes only one address and length. It would be nice to be able to send an unmapped scatter/gather list down to busdma. This would allow eliminating the copy we currently do for data. 2. Add an ioctl to list currently outstanding CCBs in the various queues. 3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do that. 4. Test physical address support. Virtual pointers and scatter gather lists have been tested, but I have not yet tested physical addresses or scatter/gather lists. 5. Investigate multiple queue support. At the moment there is one queue of commands per pass(4) device. If multiple processes open the device, they will submit I/O into the same queue and get events for the same completions. This is probably the right model for most applications, but it is something that could be changed later on. Also, add a new utility, camdd(8) that uses the asynchronous pass(4) driver interface. This utility is intended to be a basic data transfer/copy utility, a simple benchmark utility, and an example of how to use the asynchronous pass(4) interface. It can copy data to and from pass(4) devices using any target queue depth, starting offset and blocksize for the input and ouptut devices. It currently only supports SCSI devices, but could be easily extended to support ATA devices. It can also copy data to and from regular files, block devices, tape devices, pipes, stdin, and stdout. It does not support queueing multiple commands to any of those targets, since it uses the standard read(2)/write(2)/writev(2)/readv(2) system calls. The I/O is done by two threads, one for the reader and one for the writer. The reader thread sends completed read requests to the writer thread in strictly sequential order, even if they complete out of order. That could be modified later on for random I/O patterns or slightly out of order I/O. camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from the pass(4) driver and also to send request notifications internally. For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR) per CAM CCB on the reading side, and a scatter/gather list (CAM_DATA_SG) on the writing side. In addition to testing both interfaces, this makes any potential reblocking of I/O easier. No data is copied between the reader and the writer, but rather the reader's buffers are split into multiple I/O requests or combined into a single I/O request depending on the input and output blocksize. For the file I/O path, camdd(8) also uses a single buffer (read(2), write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list (readv(2), writev(2), preadv(2), pwritev(2)) on writes. Things that would be nice to do for camdd(8) eventually: 1. Add support for I/O pattern generation. Patterns like all zeros, all ones, LBA-based patterns, random patterns, etc. Right Now you can always use /dev/zero, /dev/random, etc. 2. Add support for a "sink" mode, so we do only reads with no writes. Right now, you can use /dev/null. 3. Add support for automatic queue depth probing, so that we can figure out the right queue depth on the input and output side for maximum throughput. At the moment it defaults to 6. 4. Add support for SATA device passthrough I/O. 5. Add support for random LBAs and/or lengths on the input and output sides. 6. Track average per-I/O latency and busy time. The busy time and latency could also feed in to the automatic queue depth determination. sys/cam/scsi/scsi_pass.h: Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue and fetch asynchronous CAM CCBs respectively. Although these ioctls do not have a declared argument, they both take a union ccb pointer. If we declare a size here, the ioctl code in sys/kern/sys_generic.c will malloc and free a buffer for either the CCB or the CCB pointer (depending on how it is declared). Since we have to keep a copy of the CCB (which is fairly large) anyway, having the ioctl malloc and free a CCB for each call is wasteful. sys/cam/scsi/scsi_pass.c: Add asynchronous CCB support. Add two new ioctls, CAMIOQUEUE and CAMIOGET. CAMIOQUEUE adds a CCB to the incoming queue. The CCB is executed immediately (and moved to the active queue) if it is an immediate CCB, but otherwise it will be executed in passstart() when a CCB is available from the transport layer. When CCBs are completed (because they are immediate or passdone() if they are queued), they are put on the done queue. If we get the final close on the device before all pending I/O is complete, all active I/O is moved to the abandoned queue and we increment the peripheral reference count so that the peripheral driver instance doesn't go away before all pending I/O is done. The new passcreatezone() function is called on the first call to the CAMIOQUEUE ioctl on a given device to allocate the UMA zones for I/O requests and S/G list buffers. This may be good to move off to a taskqueue at some point. The new passmemsetup() function allocates memory and scatter/gather lists to hold the user's data, and copies in any data that needs to be written. For virtual pointers (CAM_DATA_VADDR), the kernel buffer is malloced from the new pass(4) driver malloc bucket. For virtual scatter/gather lists (CAM_DATA_SG), buffers are allocated from a new per-pass(9) UMA zone in MAXPHYS-sized chunks. Physical pointers are passed in unchanged. We have support for up to 16 scatter/gather segments (for the user and kernel S/G lists) in the default struct pass_io_req, so requests with longer S/G lists require an extra kernel malloc. The new passcopysglist() function copies a user scatter/gather list to a kernel scatter/gather list. The number of elements in each list may be different, but (obviously) the amount of data stored has to be identical. The new passmemdone() function copies data out for the CAM_DATA_VADDR and CAM_DATA_SG cases. The new passiocleanup() function restores data pointers in user CCBs and frees memory. Add new functions to support kqueue(2)/kevent(2): passreadfilt() tells kevent whether or not the done queue is empty. passkqfilter() adds a knote to our list. passreadfiltdetach() removes a knote from our list. Add a new function, passpoll(), for poll(2)/select(2) to use. Add devstat(9) support for the queued CCB path. sys/cam/ata/ata_da.c: Add support for the BIO_VLIST bio type. sys/cam/cam_ccb.h: Add a new enumeration for the xflags field in the CCB header. (This doesn't change the CCB header, just adds an enumeration to use.) sys/cam/cam_xpt.c: Add a new function, xpt_setup_ccb_flags(), that allows specifying CCB flags. sys/cam/cam_xpt.h: Add a prototype for xpt_setup_ccb_flags(). sys/cam/scsi/scsi_da.c: Add support for BIO_VLIST. sys/dev/md/md.c: Add BIO_VLIST support to md(4). sys/geom/geom_disk.c: Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size limiting code in g_disk_start() a bit. sys/kern/subr_bus_dma.c: Change _bus_dmamap_load_vlist() to take a starting offset and length. Add a new function, _bus_dmamap_load_pages(), that will load a list of physical pages starting at an offset. Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios. Allow unmapped I/O to start at an offset. sys/kern/subr_uio.c: Add two new functions, physcopyin_vlist() and physcopyout_vlist(). sys/pc98/include/bus.h: Guard kernel-only parts of the pc98 machine/bus.h header with #ifdef _KERNEL. This allows userland programs to include <machine/bus.h> to get the definition of bus_addr_t and bus_size_t. sys/sys/bio.h: Add a new bio flag, BIO_VLIST. sys/sys/uio.h: Add prototypes for physcopyin_vlist() and physcopyout_vlist(). share/man/man4/pass.4: Document the CAMIOQUEUE and CAMIOGET ioctls. usr.sbin/Makefile: Add camdd. usr.sbin/camdd/Makefile: Add a makefile for camdd(8). usr.sbin/camdd/camdd.8: Man page for camdd(8). usr.sbin/camdd/camdd.c: The new camdd(8) utility. Sponsored by: Spectra Logic MFC after: 1 week
2015-12-03 20:54:55 +00:00
g_disk_advance(dp, bp2, off);
}
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
break;
case BIO_GETATTR:
Plumb device physical path reporting from CAM devices, through GEOM and DEVFS, and make it accessible via the diskinfo utility. Extend GEOM's generic attribute query mechanism into generic disk consumers. sys/geom/geom_disk.c: sys/geom/geom_disk.h: sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Allow disk providers to implement a new method which can override the default BIO_GETATTR response, d_getattr(struct bio *). This function returns -1 if not handled, otherwise it returns 0 or an errno to be passed to g_io_deliver(). sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Don't copy the serial number to dp->d_ident anymore, as the CAM XPT is now responsible for returning this information via d_getattr()->(a)dagetattr()->xpt_getatr(). sys/geom/geom_dev.c: - Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM attribute "GEOM::physpath", if possible. If the attribute request returns a zero-length string, ENOENT is returned. usr.sbin/diskinfo/diskinfo.c: - If the DIOCGPHYSPATH ioctl is successful, report physical path data when diskinfo is executed with the '-v' option. Submitted by: will Reviewed by: gibbs Sponsored by: Spectra Logic Corporation Add generic attribute change notification support to GEOM. sys/sys/geom/geom.h: Add a new attrchanged method field to both g_class and g_geom. sys/sys/geom/geom.h: sys/geom/geom_event.c: - Provide the g_attr_changed() function that providers can use to advertise attribute changes. - Perform delivery of attribute change notifications from a thread context via the standard GEOM event mechanism. sys/geom/geom_subr.c: Inherit the attrchanged method from class to geom (class instance). sys/geom/geom_disk.c: Provide disk_attr_changed() to provide g_attr_changed() access to consumers of the disk API. sys/cam/scsi/scsi_pass.c: sys/cam/scsi/scsi_da.c: sys/geom/geom_dev.c: sys/geom/geom_disk.c: Use attribute changed events to track updates to physical path information. sys/cam/scsi/scsi_da.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, and the updated buffer type references our physical path attribute, emit a GEOM attribute changed event via the disk_attr_changed() API. sys/cam/scsi/scsi_pass.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, update the physical patch devfs alias for this pass instance. Submitted by: gibbs Sponsored by: Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
/* Give the driver a chance to override */
if (dp->d_getattr != NULL) {
if (bp->bio_disk == NULL)
bp->bio_disk = dp;
error = dp->d_getattr(bp);
if (error != -1)
break;
error = EJUSTRETURN;
}
Add reporting of GEOM::candelete BIO_GETATTR for md(4) and geom_disk(4). Non-zero value of attribute means that device supports BIO_DELETE. Suggested and reviewed by: pjd Tested by: pho MFC after: 1 week
2010-12-29 12:11:07 +00:00
if (g_handleattr_int(bp, "GEOM::candelete",
(dp->d_flags & DISKFLAG_CANDELETE) != 0))
break;
else if (g_handleattr_int(bp, "GEOM::fwsectors",
dp->d_fwsectors))
Add a generic and general ioctl pass-through mechanism. It should now be posible to issue ioctls to SCSI CD drives.
2002-03-16 09:24:19 +00:00
break;
(This commit touches about 15 disk device drivers in a very consistent and predictable way, and I apologize if I have gotten it wrong anywhere, getting prior review on a patch like this is not feasible, considering the number of people involved and hardware availability etc.) If struct disklabel is the messenger: kill the messenger. Inside struct disk we had a struct disklabel which disk drivers used to communicate certain metrics to the disklayer above (GEOM or the disk mini-layer). This commit changes this communication to use four explicit fields instead. Amongst the benefits is that the fields do not get overwritten by wrong or bogus on-disk disklabels. Once that is clear, <sys/disk.h> which is included in the drivers no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in, the few places that needs them, have gotten explicit #includes for them. The disklabel inside struct disk is now only for internal use in the disk mini-layer, so instead of embedding it, we malloc it as we need it. This concludes (modulus any mistakes) the series of disklabel related commits. I belive it all amounts to a NOP for all the rest of you :-) Sponsored by: DARPA & NAI Labs.
2002-09-20 19:36:05 +00:00
else if (g_handleattr_int(bp, "GEOM::fwheads", dp->d_fwheads))
Add a generic and general ioctl pass-through mechanism. It should now be posible to issue ioctls to SCSI CD drives.
2002-03-16 09:24:19 +00:00
break;
Improve some on the naming. Submitted by: iedowse
2002-06-09 10:57:34 +00:00
else if (g_handleattr_off_t(bp, "GEOM::frontstuff", 0))
Implement DIOCGFRONTSTUFF ioctl which reports how many bytes from the start of the device magic stuff might occupy. Sponsored by: DARPA & NAI Labs.
2002-04-09 15:43:32 +00:00
break;
- Extend disk structure to allow to store disk's serial number, which can be retrieved via GEOM::ident attribute. - Bump disk(9) ABI version. OK'ed by: phk
2007-05-05 17:12:15 +00:00
else if (g_handleattr_str(bp, "GEOM::ident", dp->d_ident))
break;
Improve ZFS N-way mirror read performance by using load and locality information. The existing algorithm selects a preferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the devices are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. The new algorithm takes into the following additional factors: * Load of the vdevs (number outstanding I/O requests) * The locality of last queued I/O vs the new I/O request. Within the locality calculation additional knowledge about the underlying vdev is considered such as; is the device backing the vdev a rotating media device. This results in performance increases across the board as well as significant increases for predominantly streaming loads and for configurations which don't have evenly performing devices. The following are results from a setup with 3 Way Mirror with 2 x HD's and 1 x SSD from a basic test running multiple parrallel dd's. With pre-fetch disabled (vfs.zfs.prefetch_disable=1): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s With pre-fetch enabled (vfs.zfs.prefetch_disable=0): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s In addition to the performance changes the code was also restructured, with the help of Justin Gibbs, to provide a more logical flow which also ensures vdevs loads are only calculated from the set of valid candidates. The following additional sysctls where added to allow the administrator to tune the behaviour of the load algorithm: * vfs.zfs.vdev.mirror.rotating_inc * vfs.zfs.vdev.mirror.rotating_seek_inc * vfs.zfs.vdev.mirror.rotating_seek_offset * vfs.zfs.vdev.mirror.non_rotating_inc * vfs.zfs.vdev.mirror.non_rotating_seek_inc These changes where based on work started by the zfsonlinux developers: https://github.com/zfsonlinux/zfs/pull/1487 Reviewed by: gibbs, mav, will MFC after: 2 weeks Sponsored by: Multiplay
2013-10-23 09:54:58 +00:00
else if (g_handleattr_uint16_t(bp, "GEOM::hba_vendor",
dp->d_hba_vendor))
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to GEOM. This information needed for proper soft-RAID's on-disk metadata reading and writing.
2010-07-25 15:43:52 +00:00
break;
Improve ZFS N-way mirror read performance by using load and locality information. The existing algorithm selects a preferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the devices are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. The new algorithm takes into the following additional factors: * Load of the vdevs (number outstanding I/O requests) * The locality of last queued I/O vs the new I/O request. Within the locality calculation additional knowledge about the underlying vdev is considered such as; is the device backing the vdev a rotating media device. This results in performance increases across the board as well as significant increases for predominantly streaming loads and for configurations which don't have evenly performing devices. The following are results from a setup with 3 Way Mirror with 2 x HD's and 1 x SSD from a basic test running multiple parrallel dd's. With pre-fetch disabled (vfs.zfs.prefetch_disable=1): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s With pre-fetch enabled (vfs.zfs.prefetch_disable=0): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s In addition to the performance changes the code was also restructured, with the help of Justin Gibbs, to provide a more logical flow which also ensures vdevs loads are only calculated from the set of valid candidates. The following additional sysctls where added to allow the administrator to tune the behaviour of the load algorithm: * vfs.zfs.vdev.mirror.rotating_inc * vfs.zfs.vdev.mirror.rotating_seek_inc * vfs.zfs.vdev.mirror.rotating_seek_offset * vfs.zfs.vdev.mirror.non_rotating_inc * vfs.zfs.vdev.mirror.non_rotating_seek_inc These changes where based on work started by the zfsonlinux developers: https://github.com/zfsonlinux/zfs/pull/1487 Reviewed by: gibbs, mav, will MFC after: 2 weeks Sponsored by: Multiplay
2013-10-23 09:54:58 +00:00
else if (g_handleattr_uint16_t(bp, "GEOM::hba_device",
dp->d_hba_device))
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to GEOM. This information needed for proper soft-RAID's on-disk metadata reading and writing.
2010-07-25 15:43:52 +00:00
break;
Improve ZFS N-way mirror read performance by using load and locality information. The existing algorithm selects a preferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the devices are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. The new algorithm takes into the following additional factors: * Load of the vdevs (number outstanding I/O requests) * The locality of last queued I/O vs the new I/O request. Within the locality calculation additional knowledge about the underlying vdev is considered such as; is the device backing the vdev a rotating media device. This results in performance increases across the board as well as significant increases for predominantly streaming loads and for configurations which don't have evenly performing devices. The following are results from a setup with 3 Way Mirror with 2 x HD's and 1 x SSD from a basic test running multiple parrallel dd's. With pre-fetch disabled (vfs.zfs.prefetch_disable=1): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s With pre-fetch enabled (vfs.zfs.prefetch_disable=0): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s In addition to the performance changes the code was also restructured, with the help of Justin Gibbs, to provide a more logical flow which also ensures vdevs loads are only calculated from the set of valid candidates. The following additional sysctls where added to allow the administrator to tune the behaviour of the load algorithm: * vfs.zfs.vdev.mirror.rotating_inc * vfs.zfs.vdev.mirror.rotating_seek_inc * vfs.zfs.vdev.mirror.rotating_seek_offset * vfs.zfs.vdev.mirror.non_rotating_inc * vfs.zfs.vdev.mirror.non_rotating_seek_inc These changes where based on work started by the zfsonlinux developers: https://github.com/zfsonlinux/zfs/pull/1487 Reviewed by: gibbs, mav, will MFC after: 2 weeks Sponsored by: Multiplay
2013-10-23 09:54:58 +00:00
else if (g_handleattr_uint16_t(bp, "GEOM::hba_subvendor",
dp->d_hba_subvendor))
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to GEOM. This information needed for proper soft-RAID's on-disk metadata reading and writing.
2010-07-25 15:43:52 +00:00
break;
Improve ZFS N-way mirror read performance by using load and locality information. The existing algorithm selects a preferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the devices are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. The new algorithm takes into the following additional factors: * Load of the vdevs (number outstanding I/O requests) * The locality of last queued I/O vs the new I/O request. Within the locality calculation additional knowledge about the underlying vdev is considered such as; is the device backing the vdev a rotating media device. This results in performance increases across the board as well as significant increases for predominantly streaming loads and for configurations which don't have evenly performing devices. The following are results from a setup with 3 Way Mirror with 2 x HD's and 1 x SSD from a basic test running multiple parrallel dd's. With pre-fetch disabled (vfs.zfs.prefetch_disable=1): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s With pre-fetch enabled (vfs.zfs.prefetch_disable=0): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s In addition to the performance changes the code was also restructured, with the help of Justin Gibbs, to provide a more logical flow which also ensures vdevs loads are only calculated from the set of valid candidates. The following additional sysctls where added to allow the administrator to tune the behaviour of the load algorithm: * vfs.zfs.vdev.mirror.rotating_inc * vfs.zfs.vdev.mirror.rotating_seek_inc * vfs.zfs.vdev.mirror.rotating_seek_offset * vfs.zfs.vdev.mirror.non_rotating_inc * vfs.zfs.vdev.mirror.non_rotating_seek_inc These changes where based on work started by the zfsonlinux developers: https://github.com/zfsonlinux/zfs/pull/1487 Reviewed by: gibbs, mav, will MFC after: 2 weeks Sponsored by: Multiplay
2013-10-23 09:54:58 +00:00
else if (g_handleattr_uint16_t(bp, "GEOM::hba_subdevice",
dp->d_hba_subdevice))
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to GEOM. This information needed for proper soft-RAID's on-disk metadata reading and writing.
2010-07-25 15:43:52 +00:00
break;
Make kernel dumps work with GEOM. Notice that if the device on which the dump is set is destroyed for any reason, the dump setting is lost. This in particular will happen in the case of spoilage. For instance if you set dump on ad0s1b and open ad0 for writing, ad0s* will be spoilt and the dump setting lost. See geom(4) for more about spoiling. Sponsored by: DARPA & NAI Labs.
2002-04-19 09:24:12 +00:00
else if (!strcmp(bp->bio_attribute, "GEOM::kerneldump"))
g_disk_kerneldump(bp, dp);
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
else if (!strcmp(bp->bio_attribute, "GEOM::setstate"))
g_disk_setstate(bp, sc);
Improve ZFS N-way mirror read performance by using load and locality information. The existing algorithm selects a preferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the devices are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. The new algorithm takes into the following additional factors: * Load of the vdevs (number outstanding I/O requests) * The locality of last queued I/O vs the new I/O request. Within the locality calculation additional knowledge about the underlying vdev is considered such as; is the device backing the vdev a rotating media device. This results in performance increases across the board as well as significant increases for predominantly streaming loads and for configurations which don't have evenly performing devices. The following are results from a setup with 3 Way Mirror with 2 x HD's and 1 x SSD from a basic test running multiple parrallel dd's. With pre-fetch disabled (vfs.zfs.prefetch_disable=1): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s With pre-fetch enabled (vfs.zfs.prefetch_disable=0): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s In addition to the performance changes the code was also restructured, with the help of Justin Gibbs, to provide a more logical flow which also ensures vdevs loads are only calculated from the set of valid candidates. The following additional sysctls where added to allow the administrator to tune the behaviour of the load algorithm: * vfs.zfs.vdev.mirror.rotating_inc * vfs.zfs.vdev.mirror.rotating_seek_inc * vfs.zfs.vdev.mirror.rotating_seek_offset * vfs.zfs.vdev.mirror.non_rotating_inc * vfs.zfs.vdev.mirror.non_rotating_seek_inc These changes where based on work started by the zfsonlinux developers: https://github.com/zfsonlinux/zfs/pull/1487 Reviewed by: gibbs, mav, will MFC after: 2 weeks Sponsored by: Multiplay
2013-10-23 09:54:58 +00:00
else if (g_handleattr_uint16_t(bp, "GEOM::rotation_rate",
dp->d_rotation_rate))
break;
Simplify the ioctl handling in GEOM. This replaces the current ioctl processing with a direct call path from geom_dev() where the ioctl arrives (from SPECFS) to any directly connected GEOM class. The inverse of the above is no longer supported. This is the situation were you have one or more intervening GEOM classes, for instance a BSDlabel on top of a MBR or PC98. If you want to issue MBR or PC98 specific ioctls, you will need to issue them on a MBR or PC98 providers. This paves the way for inviting CD's, FD's and other special cases inside GEOM.
2003-09-01 20:45:32 +00:00
else
This patch got lost in my trees: Pass setattr down to device drivers as well. Detected by: scottl Sponsored by: DARPA & NAI Labs.
2002-10-05 21:55:31 +00:00
error = ENOIOCTL;
break;
Add a new disk flag - DISKFLAG_CANFLUSHCACHE, which indicates that the disk can handle BIO_FLUSH requests. Sponsored by: home.pl
2006-10-31 21:12:43 +00:00
case BIO_FLUSH:
g_disk_flushcache definitely should not be traced under G_T_TOPOLOGY ... use G_T_BIO instead MFC after: 1 week
2012-09-18 07:57:34 +00:00
g_trace(G_T_BIO, "g_disk_flushcache(%s)",
Add a new disk flag - DISKFLAG_CANFLUSHCACHE, which indicates that the disk can handle BIO_FLUSH requests. Sponsored by: home.pl
2006-10-31 21:12:43 +00:00
bp->bio_to->name);
if (!(dp->d_flags & DISKFLAG_CANFLUSHCACHE)) {
Allow upper layers to discover than BIO_DELETE and/or BIO_FLUSH is not supported by returning EOPNOTSUPP instead of 0 or ENODEV. MFC after: 3 days
2011-10-25 14:07:17 +00:00
error = EOPNOTSUPP;
break;
Add a new disk flag - DISKFLAG_CANFLUSHCACHE, which indicates that the disk can handle BIO_FLUSH requests. Sponsored by: home.pl
2006-10-31 21:12:43 +00:00
}
Add support for managing Shingled Magnetic Recording (SMR) drives. This change includes support for SCSI SMR drives (which conform to the Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to the Zoned ATA Command Set or ZAC spec) behind SAS expanders. This includes full management support through the GEOM BIO interface, and through a new userland utility, zonectl(8), and through camcontrol(8). This is now ready for filesystems to use to detect and manage zoned drives. (There is no work in progress that I know of to use this for ZFS or UFS, if anyone is interested, let me know and I may have some suggestions.) Also, improve ATA command passthrough and dispatch support, both via ATA and ATA passthrough over SCSI. Also, add support to camcontrol(8) for the ATA Extended Power Conditions feature set. You can now manage ATA device power states, and set various idle time thresholds for a drive to enter lower power states. Note that this change cannot be MFCed in full, because it depends on changes to the struct bio API that break compatilibity. In order to avoid breaking the stable API, only changes that don't touch or depend on the struct bio changes can be merged. For example, the camcontrol(8) changes don't depend on the new bio API, but zonectl(8) and the probe changes to the da(4) and ada(4) drivers do depend on it. Also note that the SMR changes have not yet been tested with an actual SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT layer, so any testing help would be appreciated. These changes have been tested with Seagate Host Aware SATA drives attached to both SAS and SATA controllers. Also, I do not have any SATA Host Managed devices, and I suspect that it may take additional (hopefully minor) changes to support them. Thanks to Seagate for supplying the test hardware and answering questions. sbin/camcontrol/Makefile: Add epc.c and zone.c. sbin/camcontrol/camcontrol.8: Document the zone and epc subcommands. sbin/camcontrol/camcontrol.c: Add the zone and epc subcommands. Add auxiliary register support to build_ata_cmd(). Make sure to set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA flags as appropriate for ATA commands. Add a new get_ata_status() function to parse ATA result from SCSI sense descriptors (for ATA passthrough over SCSI) and ATA I/O requests. sbin/camcontrol/camcontrol.h: Update the build_ata_cmd() prototype Add get_ata_status(), zone(), and epc(). sbin/camcontrol/epc.c: Support for ATA Extended Power Conditions features. This includes support for all features documented in the ACS-4 Revision 12 specification from t13.org (dated February 18, 2016). The EPC feature set allows putting a drive into a power power mode immediately, or setting timeouts so that the drive will automatically enter progressively lower power states after various idle times. sbin/camcontrol/fwdownload.c: Update the firmware download code for the new build_ata_cmd() arguments. sbin/camcontrol/zone.c: Implement support for Shingled Magnetic Recording (SMR) drives via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA Command Set (ZAC). These specs were developed in concert, and are functionally identical. The primary differences are due to SCSI and ATA differences. (SCSI is big endian, ATA is little endian, for example.) This includes support for all commands defined in the ZBC and ZAC specs. sys/cam/ata/ata_all.c: Decode a number of additional ATA command names in ata_op_string(). Add a new CCB building function, ata_read_log(). Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building functions. These support both DMA and NCQ encapsulation. sys/cam/ata/ata_all.h: Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and ata_zac_mgmt_in(). sys/cam/ata/ata_da.c: Revamp the ada(4) driver to support zoned devices. Add four new probe states to gather information needed for zone support. Add a new adasetflags() function to avoid duplication of large blocks of flag setting between the async handler and register functions. Add new sysctl variables that describe zone support and paramters. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. sys/cam/scsi/scsi_all.c: Add command descriptions for the ZBC IN/OUT commands. Add descriptions for ZBC Host Managed devices. Add a new function, scsi_ata_pass() to do ATA passthrough over SCSI. This will eventually replace scsi_ata_pass_16() -- it can create the 12, 16, and 32-byte variants of the ATA PASS-THROUGH command, and supports setting all of the registers defined as of SAT-4, Revision 5 (March 11, 2016). Change scsi_ata_identify() to use scsi_ata_pass() instead of scsi_ata_pass_16(). Add a new scsi_ata_read_log() function to facilitate reading ATA logs via SCSI. sys/cam/scsi/scsi_all.h: Add the new ATA PASS-THROUGH(32) command CDB. Add extended and variable CDB opcodes. Add Zoned Block Device Characteristics VPD page. Add ATA Return SCSI sense descriptor. Add prototypes for scsi_ata_read_log() and scsi_ata_pass(). sys/cam/scsi/scsi_da.c: Revamp the da(4) driver to support zoned devices. Add five new probe states, four of which are needed for ATA devices. Add five new sysctl variables that describe zone support and parameters. The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC devices when they are attached via a SCSI to ATA Translation (SAT) layer. Since ZBC -> ZAC translation is a new feature in the T10 SAT-4 spec, most SATA drives will be supported via ATA commands sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will prefer the ZBC interface, if it is available, for performance reasons, but will use the ATA PASS-THROUGH interface to the ZAC command set if the SAT layer doesn't support translation yet. As I mentioned above, ZBC command support is untested. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. Add scsi_zbc_in() and scsi_zbc_out() CCB building functions. Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB building functions. Note that these have return values, unlike almost all other CCB building functions in CAM. The reason is that they can fail, depending upon the particular combination of input parameters. The primary failure case is if the user wants NCQ, but fails to specify additional CDB storage. NCQ requires using the 32-byte version of the SCSI ATA PASS-THROUGH command, and the current CAM CDB size is 16 bytes. sys/cam/scsi/scsi_da.h: Add ZBC IN and ZBC OUT CDBs and opcodes. Add SCSI Report Zones data structures. Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and scsi_ata_zac_mgmt_in() prototypes. sys/dev/ahci/ahci.c: Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver. ahci_setup_fis() previously set the top bits of the sector count register in the FIS to 0 for FPDMA commands. This is okay for read and write, because the PRIO field is in the only thing in those bits, and we don't implement that further up the stack. But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that byte, so it needs to be transmitted to the drive. In ahci_setup_fis(), always set the the top 8 bits of the sector count register. We need it in both the standard and NCQ / FPDMA cases. sys/geom/eli/g_eli.c: Pass BIO_ZONE commands through the GELI class. sys/geom/geom.h: Add g_io_zonecmd() prototype. sys/geom/geom_dev.c: Add new DIOCZONECMD ioctl, which allows sending zone commands to disks. sys/geom/geom_disk.c: Add support for BIO_ZONE commands. sys/geom/geom_disk.h: Add a new flag, DISKFLAG_CANZONE, that indicates that a given GEOM disk client can handle BIO_ZONE commands. sys/geom/geom_io.c: Add a new function, g_io_zonecmd(), that handles execution of BIO_ZONE commands. Add permissions check for BIO_ZONE commands. Add command decoding for BIO_ZONE commands. sys/geom/geom_subr.c: Add DDB command decoding for BIO_ZONE commands. sys/kern/subr_devstat.c: Record statistics for REPORT ZONES commands. Note that the number of bytes transferred for REPORT ZONES won't quite match what is received from the harware. This is because we're necessarily counting bytes coming from the da(4) / ada(4) drivers, which are using the disk_zone.h interface to communicate up the stack. The structure sizes it uses are slightly different than the SCSI and ATA structure sizes. sys/sys/ata.h: Add many bit and structure definitions for ZAC, NCQ, and EPC command support. sys/sys/bio.h: Convert the bio_cmd field to a straight enumeration. This will yield more space for additional commands in the future. After change r297955 and other related changes, this is now possible. Converting to an enumeration will also prevent use as a bitmask in the future. sys/sys/disk.h: Define the DIOCZONECMD ioctl. sys/sys/disk_zone.h: Add a new API for managing zoned disks. This is very close to the SCSI ZBC and ATA ZAC standards, but uses integers in native byte order instead of big endian (SCSI) or little endian (ATA) byte arrays. This is intended to offer to the complete feature set of the ZBC and ZAC disk management without requiring the application developer to include SCSI or ATA headers. We also use one set of headers for ioctl consumers and kernel bio-level consumers. sys/sys/param.h: Bump __FreeBSD_version for sys/bio.h command changes, and inclusion of SMR support. usr.sbin/Makefile: Add the zonectl utility. usr.sbin/diskinfo/diskinfo.c Add disk zoning capability to the 'diskinfo -v' output. usr.sbin/zonectl/Makefile: Add zonectl makefile. usr.sbin/zonectl/zonectl.8 zonectl(8) man page. usr.sbin/zonectl/zonectl.c The zonectl(8) utility. This allows managing SCSI or ATA zoned disks via the disk_zone.h API. You can report zones, reset write pointers, get parameters, etc. Sponsored by: Spectra Logic Differential Revision: https://reviews.freebsd.org/D6147 Reviewed by: wblock (documentation)
2016-05-19 14:08:36 +00:00
/*FALLTHROUGH*/
case BIO_ZONE:
if (bp->bio_cmd == BIO_ZONE) {
if (!(dp->d_flags & DISKFLAG_CANZONE)) {
error = EOPNOTSUPP;
break;
}
g_trace(G_T_BIO, "g_disk_zone(%s)",
bp->bio_to->name);
}
Revert somewhat hackish geom_disk optimization, committed as part of r256880, and the following r273143 commit, supposed to workaround introduced issue by quite innocent-looking change. While there is no clear understanding why, but r273143 is accused in data corruption in some environments with high I/O load. I personally don't see any problem in that commit, and possibly it is just a trigger to some other bug somewhere, but better safe then sorry for now. Requested by: scottl@ MFC after: 3 days
2014-10-25 15:16:19 +00:00
bp2 = g_clone_bio(bp);
if (bp2 == NULL) {
g_io_deliver(bp, ENOMEM);
return;
}
bp2->bio_done = g_disk_done;
bp2->bio_disk = dp;
mtx_lock(&sc->start_mtx);
devstat_start_transaction_bio(dp->d_devstat, bp2);
mtx_unlock(&sc->start_mtx);
dp->d_strategy(bp2);
Add a new disk flag - DISKFLAG_CANFLUSHCACHE, which indicates that the disk can handle BIO_FLUSH requests. Sponsored by: home.pl
2006-10-31 21:12:43 +00:00
break;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
default:
Add a generic and general ioctl pass-through mechanism. It should now be posible to issue ioctls to SCSI CD drives.
2002-03-16 09:24:19 +00:00
error = EOPNOTSUPP;
break;
}
Correctly deal with non-DEVBSIZE drives. Allow BIO_DELETE through too. This fixes swap-backed md(4) devices. Sponsored by: DARPA & NAI Labs.
2002-10-07 07:15:37 +00:00
if (error != EJUSTRETURN)
Retire g_io_fail() and let g_io_deliver() take an error argument instead. Sponsored by: DARPA & NAI Labs.
2002-09-30 08:54:46 +00:00
g_io_deliver(bp, error);
Add a generic and general ioctl pass-through mechanism. It should now be posible to issue ioctls to SCSI CD drives.
2002-03-16 09:24:19 +00:00
return;
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
}
Include fwsectors and gfwheads in the XML output for the disks we know. Sponsored by: DARPA & NAI Labs.
2002-10-20 18:09:01 +00:00
static void
Constification and some s/int/u_int/ changes.
2002-12-16 22:33:27 +00:00
g_disk_dumpconf(struct sbuf *sb, const char *indent, struct g_geom *gp, struct g_consumer *cp, struct g_provider *pp)
Include fwsectors and gfwheads in the XML output for the disks we know. Sponsored by: DARPA & NAI Labs.
2002-10-20 18:09:01 +00:00
{
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2013-06-12 13:36:20 +00:00
struct bio *bp;
Include fwsectors and gfwheads in the XML output for the disks we know. Sponsored by: DARPA & NAI Labs.
2002-10-20 18:09:01 +00:00
struct disk *dp;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2013-06-12 13:36:20 +00:00
char *buf;
int res = 0;
Include fwsectors and gfwheads in the XML output for the disks we know. Sponsored by: DARPA & NAI Labs.
2002-10-20 18:09:01 +00:00
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
sc = gp->softc;
if (sc == NULL || (dp = sc->dp) == NULL)
Be more careful in dumpconf: softc may be NULL for departing devices. Allow drivers to initialize the d_devstat if they want magic params.
2003-09-23 07:53:59 +00:00
return;
Add the remaning part of the new libdisk interaction. WARNING: This is not a published interface, it is a stopgap measure for WARNING: libdisk so we can get 5.0-R out of the door. Sponsored by: DARPA & NAI Labs
2002-10-28 22:43:54 +00:00
if (indent == NULL) {
sbuf_printf(sb, " hd %u", dp->d_fwheads);
sbuf_printf(sb, " sc %u", dp->d_fwsectors);
return;
}
It makes more sense for the fwheads and fwsectors properties to be in the provider stanza rather than the geom stanza.
2002-10-20 18:46:25 +00:00
if (pp != NULL) {
Include fwsectors and gfwheads in the XML output for the disks we know. Sponsored by: DARPA & NAI Labs.
2002-10-20 18:09:01 +00:00
sbuf_printf(sb, "%s<fwheads>%u</fwheads>\n",
indent, dp->d_fwheads);
sbuf_printf(sb, "%s<fwsectors>%u</fwsectors>\n",
indent, dp->d_fwsectors);
Add rotationrate to geom disk dumpconf Parse and report the nominal rotation rate reported by the drive. Reviewed by: sbruno, jhb Approved by: jhb MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D4483 Requested by: Kevin Bowling < kevin.bowling @ kev009.com >
2016-01-14 21:52:21 +00:00
/*
* "rotationrate" is a little complicated, because the value
* returned by the drive might not be the RPM; 0 and 1 are
* special cases, and there's also a valid range.
*/
sbuf_printf(sb, "%s<rotationrate>", indent);
if (dp->d_rotation_rate == 0) /* Old drives don't */
sbuf_printf(sb, "unknown"); /* report RPM. */
else if (dp->d_rotation_rate == 1) /* Since 0 is used */
sbuf_printf(sb, "0"); /* above, SSDs use 1. */
else if ((dp->d_rotation_rate >= 0x041) &&
(dp->d_rotation_rate <= 0xfffe))
sbuf_printf(sb, "%u", dp->d_rotation_rate);
else
sbuf_printf(sb, "invalid");
sbuf_printf(sb, "</rotationrate>\n");
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2013-06-12 13:36:20 +00:00
if (dp->d_getattr != NULL) {
buf = g_malloc(DISK_IDENT_SIZE, M_WAITOK);
bp = g_alloc_bio();
bp->bio_disk = dp;
bp->bio_attribute = "GEOM::ident";
bp->bio_length = DISK_IDENT_SIZE;
bp->bio_data = buf;
res = dp->d_getattr(bp);
Escape special XML chars, returned by some devices, confusing XML parsers. MFC after: 1 month
2013-11-27 14:25:06 +00:00
sbuf_printf(sb, "%s<ident>", indent);
g_conf_printf_escaped(sb, "%s",
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2013-06-12 13:36:20 +00:00
res == 0 ? buf: dp->d_ident);
Escape special XML chars, returned by some devices, confusing XML parsers. MFC after: 1 month
2013-11-27 14:25:06 +00:00
sbuf_printf(sb, "</ident>\n");
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2013-06-12 13:36:20 +00:00
bp->bio_attribute = "GEOM::lunid";
bp->bio_length = DISK_IDENT_SIZE;
bp->bio_data = buf;
Escape special XML chars, returned by some devices, confusing XML parsers. MFC after: 1 month
2013-11-27 14:25:06 +00:00
if (dp->d_getattr(bp) == 0) {
sbuf_printf(sb, "%s<lunid>", indent);
g_conf_printf_escaped(sb, "%s", buf);
sbuf_printf(sb, "</lunid>\n");
}
Add new attribute lunname to report only textual LUN-specific device IDs. While lunid attribute prefers to report numeric ones, having both may be useful in some situations.
2013-08-24 09:42:14 +00:00
bp->bio_attribute = "GEOM::lunname";
bp->bio_length = DISK_IDENT_SIZE;
bp->bio_data = buf;
Escape special XML chars, returned by some devices, confusing XML parsers. MFC after: 1 month
2013-11-27 14:25:06 +00:00
if (dp->d_getattr(bp) == 0) {
sbuf_printf(sb, "%s<lunname>", indent);
g_conf_printf_escaped(sb, "%s", buf);
sbuf_printf(sb, "</lunname>\n");
}
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2013-06-12 13:36:20 +00:00
g_destroy_bio(bp);
g_free(buf);
Escape special XML chars, returned by some devices, confusing XML parsers. MFC after: 1 month
2013-11-27 14:25:06 +00:00
} else {
sbuf_printf(sb, "%s<ident>", indent);
g_conf_printf_escaped(sb, "%s", dp->d_ident);
sbuf_printf(sb, "</ident>\n");
}
sbuf_printf(sb, "%s<descr>", indent);
g_conf_printf_escaped(sb, "%s", dp->d_descr);
sbuf_printf(sb, "</descr>\n");
Include fwsectors and gfwheads in the XML output for the disks we know. Sponsored by: DARPA & NAI Labs.
2002-10-20 18:09:01 +00:00
}
}
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
static void
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
g_disk_resize(void *ptr, int flag)
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
{
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
struct disk *dp;
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
struct g_geom *gp;
struct g_provider *pp;
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
if (flag == EV_CANCEL)
return;
g_topology_assert();
dp = ptr;
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
gp = dp->d_geom;
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
if (dp->d_destroyed || gp == NULL)
return;
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
LIST_FOREACH(pp, &gp->provider, provider) {
if (pp->sectorsize != 0 &&
pp->sectorsize != dp->d_sectorsize)
g_wither_provider(pp, ENXIO);
else
g_resize_provider(pp, dp->d_mediasize);
}
}
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
static void
Don't do silly thing if the disk_create() event gets canceled. Approved by: re/scottl
2003-05-25 16:57:10 +00:00
g_disk_create(void *arg, int flag)
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
{
struct g_geom *gp;
struct g_provider *pp;
Propagate DISKFLAG_CANDELETE from struct disk to G_PF_CANDELETE on the provider.
2003-02-11 14:12:06 +00:00
struct disk *dp;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
char tmpstr[80];
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
Don't do silly thing if the disk_create() event gets canceled. Approved by: re/scottl
2003-05-25 16:57:10 +00:00
if (flag == EV_CANCEL)
return;
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
g_topology_assert();
Propagate DISKFLAG_CANDELETE from struct disk to G_PF_CANDELETE on the provider.
2003-02-11 14:12:06 +00:00
dp = arg;
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_lock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
dp->d_init_level = DISK_INIT_START;
/*
* If the disk has already gone away, we can just stop here and
* call the user's callback to tell him we've cleaned things up.
*/
if (dp->d_goneflag != 0) {
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_unlock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
if (dp->d_gone != NULL)
dp->d_gone(dp);
return;
}
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_unlock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
sc = g_malloc(sizeof(*sc), M_WAITOK | M_ZERO);
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
mtx_init(&sc->start_mtx, "g_disk_start", NULL, MTX_DEF);
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
mtx_init(&sc->done_mtx, "g_disk_done", NULL, MTX_DEF);
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
sc->dp = dp;
Propagate DISKFLAG_CANDELETE from struct disk to G_PF_CANDELETE on the provider.
2003-02-11 14:12:06 +00:00
gp = g_new_geomf(&g_disk_class, "%s%d", dp->d_name, dp->d_unit);
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
gp->softc = sc;
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
pp = g_new_providerf(gp, "%s", gp->name);
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
devstat_remove_entry(pp->stat);
pp->stat = NULL;
dp->d_devstat->id = pp;
Propagate DISKFLAG_CANDELETE from struct disk to G_PF_CANDELETE on the provider.
2003-02-11 14:12:06 +00:00
pp->mediasize = dp->d_mediasize;
pp->sectorsize = dp->d_sectorsize;
Better names for struct disk elements: d_maxsize, d_stripeoffset and d_stripesisze; Introduce si_stripesize and si_stripeoffset in struct cdev so we can make the visible to clustering code. Add stripesize and stripeoffset to providers. DTRT with stripesize and stripeoffset in various places in GEOM.
2003-02-11 14:57:34 +00:00
pp->stripeoffset = dp->d_stripeoffset;
pp->stripesize = dp->d_stripesize;
A flag for the geom disk driver to indicate that it accepts the unmapped i/o requests. Sponsored by: The FreeBSD Foundation Tested by: pho
2013-03-19 14:49:15 +00:00
if ((dp->d_flags & DISKFLAG_UNMAPPED_BIO) != 0)
pp->flags |= G_PF_ACCEPT_UNMAPPED;
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
if ((dp->d_flags & DISKFLAG_DIRECT_COMPLETION) != 0)
pp->flags |= G_PF_DIRECT_SEND;
pp->flags |= G_PF_DIRECT_RECEIVE;
Reduce the GEOM verbosity under bootverbose to something more sufferable. This is not quite the set of information I would want, but the tree where I have the "correct" version is messed up with conflicts. Sponsored by: DARPA & NAI Labs.
2002-10-25 20:09:45 +00:00
if (bootverbose)
printf("GEOM: new disk %s\n", gp->name);
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
sysctl_ctx_init(&sc->sysctl_ctx);
snprintf(tmpstr, sizeof(tmpstr), "GEOM disk %s", gp->name);
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_kern_geom_disk), OID_AUTO, gp->name,
CTLFLAG_RD, 0, tmpstr);
if (sc->sysctl_tree != NULL) {
SYSCTL_ADD_STRING(&sc->sysctl_ctx,
SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO, "led",
Pull in r267961 and r267973 again. Fix for issues reported will follow.
2014-06-28 03:56:17 +00:00
CTLFLAG_RWTUN, sc->led, sizeof(sc->led),
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
"LED name");
}
pp->private = sc;
Add handling for cancelled events in the g_call_me() methods.
2003-04-02 21:10:04 +00:00
dp->d_geom = gp;
g_error_provider(pp, 0);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_lock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
dp->d_init_level = DISK_INIT_DONE;
/*
* If the disk has gone away at this stage, start the withering
* process for it.
*/
if (dp->d_goneflag != 0) {
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_unlock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
g_wither_provider(pp, ENXIO);
return;
}
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_unlock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
}
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
2012-06-24 04:29:03 +00:00
/*
* We get this callback after all of the consumers have gone away, and just
* before the provider is freed. If the disk driver provided a d_gone
* callback, let them know that it is okay to free resources -- they won't
* be getting any more accesses from GEOM.
*/
static void
g_disk_providergone(struct g_provider *pp)
{
struct disk *dp;
struct g_disk_softc *sc;
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
sc = (struct g_disk_softc *)pp->private;
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
2012-06-24 04:29:03 +00:00
dp = sc->dp;
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
if (dp != NULL && dp->d_gone != NULL)
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
2012-06-24 04:29:03 +00:00
dp->d_gone(dp);
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
if (sc->sysctl_tree != NULL) {
sysctl_ctx_free(&sc->sysctl_ctx);
sc->sysctl_tree = NULL;
}
if (sc->led[0] != 0) {
led_set(sc->led, "0");
sc->led[0] = 0;
}
pp->private = NULL;
pp->geom->softc = NULL;
mtx_destroy(&sc->done_mtx);
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
2013-10-22 08:22:19 +00:00
mtx_destroy(&sc->start_mtx);
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
g_free(sc);
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
2012-06-24 04:29:03 +00:00
}
Try to close the race between disk_destroy() and a subsequent disk_create().
2003-09-01 12:03:13 +00:00
static void
g_disk_destroy(void *ptr, int flag)
{
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
struct disk *dp;
Try to close the race between disk_destroy() and a subsequent disk_create().
2003-09-01 12:03:13 +00:00
struct g_geom *gp;
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
struct g_disk_softc *sc;
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
Try to close the race between disk_destroy() and a subsequent disk_create().
2003-09-01 12:03:13 +00:00
g_topology_assert();
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
dp = ptr;
gp = dp->d_geom;
CAM will sometimes remove a disk again even before it finished being initialized. We already cancel the pending events but we need to not dereference the geom pointer which never got set different from NULL.
2005-01-14 21:05:35 +00:00
if (gp != NULL) {
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
2011-03-24 19:23:42 +00:00
sc = gp->softc;
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
2013-03-25 05:45:24 +00:00
if (sc != NULL)
sc->dp = NULL;
dp->d_geom = NULL;
CAM will sometimes remove a disk again even before it finished being initialized. We already cancel the pending events but we need to not dereference the geom pointer which never got set different from NULL.
2005-01-14 21:05:35 +00:00
g_wither_geom(gp, ENXIO);
}
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
g_free(dp);
Try to close the race between disk_destroy() and a subsequent disk_create().
2003-09-01 12:03:13 +00:00
}
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
Because there are many strange hardware out there, allow to use only [a-zA-Z0-9-_@#%.] characters in d_ident field.
2007-05-05 17:47:20 +00:00
/*
Simplify g_disk_ident_adjust() function and allow any printable character in serial number. Discussed with: trasz Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:39:06 +00:00
* We only allow printable characters in disk ident,
* the rest is converted to 'x<HH>'.
Because there are many strange hardware out there, allow to use only [a-zA-Z0-9-_@#%.] characters in d_ident field.
2007-05-05 17:47:20 +00:00
*/
static void
g_disk_ident_adjust(char *ident, size_t size)
{
Simplify g_disk_ident_adjust() function and allow any printable character in serial number. Discussed with: trasz Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:39:06 +00:00
char *p, tmp[4], newid[DISK_IDENT_SIZE];
newid[0] = '\0';
for (p = ident; *p != '\0'; p++) {
if (isprint(*p)) {
tmp[0] = *p;
tmp[1] = '\0';
} else {
snprintf(tmp, sizeof(tmp), "x%02hhx",
*(unsigned char *)p);
Because there are many strange hardware out there, allow to use only [a-zA-Z0-9-_@#%.] characters in d_ident field.
2007-05-05 17:47:20 +00:00
}
Simplify g_disk_ident_adjust() function and allow any printable character in serial number. Discussed with: trasz Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:39:06 +00:00
if (strlcat(newid, tmp, sizeof(newid)) >= sizeof(newid))
break;
Because there are many strange hardware out there, allow to use only [a-zA-Z0-9-_@#%.] characters in d_ident field.
2007-05-05 17:47:20 +00:00
}
bzero(ident, size);
strlcpy(ident, newid, size);
}
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
struct disk *
Simplify disk_alloc(). MFC after: 3 days
2011-10-25 14:04:59 +00:00
disk_alloc(void)
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
{
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
Simplify disk_alloc(). MFC after: 3 days
2011-10-25 14:04:59 +00:00
return (g_malloc(sizeof(struct disk), M_WAITOK | M_ZERO));
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
}
The CAM system has it's own ideas of what locks are to be held by whom. So do GEOM. Not a pretty sight. Take all the interesting stuff out of GEOM::disk_create(), and leave just the creation of the fake dev_t. Schedule the topology munging to happen in the g_event thread with g_call_me(). This makes disk_create() pretty lock-agnostic, almost lock-atheist. Tripped over by: peter Sponsored by: DARPA & NAI Labs
2002-10-11 20:52:44 +00:00
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
void
disk_create(struct disk *dp, int version)
{
Improve style a bit. MFC after: 3 days
2011-10-25 14:05:39 +00:00
Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940. Ensure that d_delmaxsize is always set, removing init to 0 which could cause future issues if use cases change. Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased up to the calculated max after being reduced. MFC after: 1 day X-MFC-With: r249940
2013-07-03 23:46:30 +00:00
if (version != DISK_VERSION) {
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
printf("WARNING: Attempt to add disk %s%d %s",
dp->d_name, dp->d_unit,
" using incompatible ABI version of disk(9)\n");
printf("WARNING: Ignoring disk %s%d\n",
dp->d_name, dp->d_unit);
return;
}
Reject attempts to attack a disk device that has the old NEEDSGIANT flag set. Reviewed by: mav
2013-10-25 19:19:12 +00:00
if (dp->d_flags & DISKFLAG_RESERVED) {
printf("WARNING: Attempt to add non-MPSAFE disk %s%d\n",
dp->d_name, dp->d_unit);
printf("WARNING: Ignoring disk %s%d\n",
dp->d_name, dp->d_unit);
return;
}
Add some agility to the disk_create() API: Make passing the methods in a cdevsw structure optional. Move "CANFREE" and "NOGIANT" flags into struct disk instead of the cdevsw which may or may not be there. Rename CANFREE to CANDELETE to match BIO_DELETE operation. Add "OPEN" flag so drivers don't have to provide open/close methods just to maintain such a flag. Add temporary stopgap include of <sys/conf.h> to <sys/disk.h> until the files which have them in the other order are fixed. Add KASSERTS to make sure we don't get fed too many NULL pointers. Clear our geom's softc pointer before we wither.
2003-01-30 20:34:23 +00:00
KASSERT(dp->d_strategy != NULL, ("disk_create need d_strategy"));
KASSERT(dp->d_name != NULL, ("disk_create need d_name"));
KASSERT(*dp->d_name != 0, ("disk_create need d_name"));
Pave the road to removing the fixed size limit on device nodes: Change the si_name of dev_t's to be a char * and put a private buffer for holding the name at then end of the struct. Initialize si_name to point to the private buffer. Put a KASSERT in geom_disk to prevent overrun on the fake dev_t we still have to generate for the disk_drivers.
2003-02-04 10:32:40 +00:00
KASSERT(strlen(dp->d_name) < SPECNAMELEN - 4, ("disk name too long"));
Be more careful in dumpconf: softc may be NULL for departing devices. Allow drivers to initialize the d_devstat if they want magic params.
2003-09-23 07:53:59 +00:00
if (dp->d_devstat == NULL)
dp->d_devstat = devstat_new_entry(dp->d_name, dp->d_unit,
dp->d_sectorsize, DEVSTAT_ALL_SUPPORTED,
DEVSTAT_TYPE_DIRECT, DEVSTAT_PRIORITY_MAX);
Add handling for cancelled events in the g_call_me() methods.
2003-04-02 21:10:04 +00:00
dp->d_geom = NULL;
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
dp->d_init_level = DISK_INIT_NONE;
Because there are many strange hardware out there, allow to use only [a-zA-Z0-9-_@#%.] characters in d_ident field.
2007-05-05 17:47:20 +00:00
g_disk_ident_adjust(dp->d_ident, sizeof(dp->d_ident));
Rename g_call_me() to g_post_event(), and give it a flag argument to determine if we can M_WAITOK in malloc.
2003-04-23 20:46:12 +00:00
g_post_event(g_disk_create, dp, M_WAITOK, dp, NULL);
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
}
void
NO_GEOM cleanup: Change the argument to disk_destroy() to be the same struct disk * as disk_create() takes. This enables drivers to ignore the (now) bogus dev_t which disk_create() returns.
2003-02-21 15:13:26 +00:00
disk_destroy(struct disk *dp)
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
{
Add handling for cancelled events in the g_call_me() methods.
2003-04-02 21:10:04 +00:00
g_cancel_event(dp);
Change the disk(9) API in order to make device removal more robust. Previously the "struct disk" were owned by the device driver and this gave us problems when the device disappared and the users of that device were not immediately disappearing. Now the struct disk is allocate with a new call, disk_alloc() and owned by geom_disk and just abandonned by the device driver when disk_create() is called. Unfortunately, this results in a ton of "s/\./->/" changes to device drivers. Since I'm doing the sweep anyway, a couple of other API improvements have been carried out at the same time: The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to DISKFLAG_NEEDSGIANT A version number have been added to disk_create() so that we can detect, report and ignore binary drivers with old ABI in the future. Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
dp->d_destroyed = 1;
Make sure to kill the devstat entry for disappearing disks. PR: 68074 Submitted by: Hendrik Scholz <hscholz@raisdorf.net>
2004-06-27 20:53:20 +00:00
if (dp->d_devstat != NULL)
devstat_remove_entry(dp->d_devstat);
Fix regression in last commit.
2004-06-29 08:33:58 +00:00
g_post_event(g_disk_destroy, dp, M_WAITOK, NULL);
First commit of the GEOM subsystem to make it easier for people to test and play with this. This is not yet production quality and should be run only on dedicated test boxes. For people who want to develop transformations for GEOM there exist a set of shims to run geom in userland (ask phk@freebsd.org). Reports of all kinds to: phk@freebsd.org Please include in report: dmesg sysctl debug.geomdot sysctl debug.geomconf Known significant limitations: no kernel dump facility. ioctls severely restricted. Sponsored by: DARPA, NAI Labs
2002-03-11 21:42:35 +00:00
}
Fix a bug that caused some /dev entries to continue to exist after the underlying drive had been hot-unplugged from the system. Here is a specific example. Filesystem code had opened /dev/da1s1e. Subsequently, the drive was hot-unplugged. This (correctly) caused all of the associated /dev/da1* entries to be deleted. When the filesystem later realized that the drive was gone it closed the device, reducing the write-access counts to 0 on the geom providers for da1s1e, da1s1, and da1. This caused geom to re-taste the providers, resulting in the devices being created again. When the drive was hot-plugged back in, it resulted in duplicate /dev entries for da1s1e, da1s1, and da1. This fix adds a new disk_gone() function which is called by CAM when a drive goes away. It orphans all of the providers associated with the drive, setting an error condition of ENXIO in each one. In addition, we prevent a re-taste on last close for writing if an error condition has been set in the provider. Sponsored by: Isilon Systems Reviewed by: phk MFC after: 1 week
2005-11-18 02:43:49 +00:00
void
disk_gone(struct disk *dp)
{
struct g_geom *gp;
struct g_provider *pp;
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_lock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
dp->d_goneflag = 1;
/*
* If we're still in the process of creating this disk (the
* g_disk_create() function is still queued, or is in
* progress), the init level will not yet be DISK_INIT_DONE.
*
* If that is the case, g_disk_create() will see d_goneflag
* and take care of cleaning things up.
*
* If the disk has already been created, we default to
* withering the provider as usual below.
*
* If the caller has not set a d_gone() callback, he will
* not be any worse off by returning here, because the geom
* has not been fully setup in any case.
*/
if (dp->d_init_level < DISK_INIT_DONE) {
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_unlock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
return;
}
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
2016-06-23 20:05:59 +00:00
mtx_pool_unlock(mtxpool_sleep, dp);
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
2016-06-21 20:18:19 +00:00
Fix a bug that caused some /dev entries to continue to exist after the underlying drive had been hot-unplugged from the system. Here is a specific example. Filesystem code had opened /dev/da1s1e. Subsequently, the drive was hot-unplugged. This (correctly) caused all of the associated /dev/da1* entries to be deleted. When the filesystem later realized that the drive was gone it closed the device, reducing the write-access counts to 0 on the geom providers for da1s1e, da1s1, and da1. This caused geom to re-taste the providers, resulting in the devices being created again. When the drive was hot-plugged back in, it resulted in duplicate /dev entries for da1s1e, da1s1, and da1. This fix adds a new disk_gone() function which is called by CAM when a drive goes away. It orphans all of the providers associated with the drive, setting an error condition of ENXIO in each one. In addition, we prevent a re-taste on last close for writing if an error condition has been set in the provider. Sponsored by: Isilon Systems Reviewed by: phk MFC after: 1 week
2005-11-18 02:43:49 +00:00
gp = dp->d_geom;
Use the topology lock to protect list of providers while withering them. It is possible that provider is destroyed while we are iterating over the list. Reported by: Brian Parkison <parkison@panzura.com> Discussed with: phk MFC after: 1 week
2012-09-22 12:41:49 +00:00
if (gp != NULL) {
Remove the topology lock from disk_gone(), it might be called with regular mutexes held and the topology lock is an sx lock. The topology lock was there to protect traversing through the list of providers of disk's geom, but it seems that disk's geom has always exactly one provider. Change the code to call g_wither_provider() for this one provider, which is safe to do without holding the topology lock and assert that there is indeed only one provider. Discussed with: ken MFC after: 1 week
2012-09-28 08:22:51 +00:00
pp = LIST_FIRST(&gp->provider);
if (pp != NULL) {
KASSERT(LIST_NEXT(pp, provider) == NULL,
("geom %p has more than one provider", gp));
Add g_wither_provider() to abstract the details of destroying a particular provider. Use this function where g_orphan_provider() is being called so that the flags are updated correctly and g_orphan_provider() is called only when allowed.
2006-04-10 03:55:13 +00:00
g_wither_provider(pp, ENXIO);
Remove the topology lock from disk_gone(), it might be called with regular mutexes held and the topology lock is an sx lock. The topology lock was there to protect traversing through the list of providers of disk's geom, but it seems that disk's geom has always exactly one provider. Change the code to call g_wither_provider() for this one provider, which is safe to do without holding the topology lock and assert that there is indeed only one provider. Discussed with: ken MFC after: 1 week
2012-09-28 08:22:51 +00:00
}
Use the topology lock to protect list of providers while withering them. It is possible that provider is destroyed while we are iterating over the list. Reported by: Brian Parkison <parkison@panzura.com> Discussed with: phk MFC after: 1 week
2012-09-22 12:41:49 +00:00
}
Fix a bug that caused some /dev entries to continue to exist after the underlying drive had been hot-unplugged from the system. Here is a specific example. Filesystem code had opened /dev/da1s1e. Subsequently, the drive was hot-unplugged. This (correctly) caused all of the associated /dev/da1* entries to be deleted. When the filesystem later realized that the drive was gone it closed the device, reducing the write-access counts to 0 on the geom providers for da1s1e, da1s1, and da1. This caused geom to re-taste the providers, resulting in the devices being created again. When the drive was hot-plugged back in, it resulted in duplicate /dev entries for da1s1e, da1s1, and da1. This fix adds a new disk_gone() function which is called by CAM when a drive goes away. It orphans all of the providers associated with the drive, setting an error condition of ENXIO in each one. In addition, we prevent a re-taste on last close for writing if an error condition has been set in the provider. Sponsored by: Isilon Systems Reviewed by: phk MFC after: 1 week
2005-11-18 02:43:49 +00:00
}
Plumb device physical path reporting from CAM devices, through GEOM and DEVFS, and make it accessible via the diskinfo utility. Extend GEOM's generic attribute query mechanism into generic disk consumers. sys/geom/geom_disk.c: sys/geom/geom_disk.h: sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Allow disk providers to implement a new method which can override the default BIO_GETATTR response, d_getattr(struct bio *). This function returns -1 if not handled, otherwise it returns 0 or an errno to be passed to g_io_deliver(). sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Don't copy the serial number to dp->d_ident anymore, as the CAM XPT is now responsible for returning this information via d_getattr()->(a)dagetattr()->xpt_getatr(). sys/geom/geom_dev.c: - Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM attribute "GEOM::physpath", if possible. If the attribute request returns a zero-length string, ENOENT is returned. usr.sbin/diskinfo/diskinfo.c: - If the DIOCGPHYSPATH ioctl is successful, report physical path data when diskinfo is executed with the '-v' option. Submitted by: will Reviewed by: gibbs Sponsored by: Spectra Logic Corporation Add generic attribute change notification support to GEOM. sys/sys/geom/geom.h: Add a new attrchanged method field to both g_class and g_geom. sys/sys/geom/geom.h: sys/geom/geom_event.c: - Provide the g_attr_changed() function that providers can use to advertise attribute changes. - Perform delivery of attribute change notifications from a thread context via the standard GEOM event mechanism. sys/geom/geom_subr.c: Inherit the attrchanged method from class to geom (class instance). sys/geom/geom_disk.c: Provide disk_attr_changed() to provide g_attr_changed() access to consumers of the disk API. sys/cam/scsi/scsi_pass.c: sys/cam/scsi/scsi_da.c: sys/geom/geom_dev.c: sys/geom/geom_disk.c: Use attribute changed events to track updates to physical path information. sys/cam/scsi/scsi_da.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, and the updated buffer type references our physical path attribute, emit a GEOM attribute changed event via the disk_attr_changed() API. sys/cam/scsi/scsi_pass.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, update the physical patch devfs alias for this pass instance. Submitted by: gibbs Sponsored by: Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
void
disk_attr_changed(struct disk *dp, const char *attr, int flag)
{
struct g_geom *gp;
struct g_provider *pp;
Notify userspace listeners when geom disk attributes have changed sys/geom/geom_disk.c: disk_attr_changed(): Generate a devctl event of type GEOM:<attr> for every call. MFC after: 4 weeks Sponsored by: Spectra Logic Corp Differential Revision: https://reviews.freebsd.org/D5952
2016-04-21 16:43:15 +00:00
char devnamebuf[128];
Plumb device physical path reporting from CAM devices, through GEOM and DEVFS, and make it accessible via the diskinfo utility. Extend GEOM's generic attribute query mechanism into generic disk consumers. sys/geom/geom_disk.c: sys/geom/geom_disk.h: sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Allow disk providers to implement a new method which can override the default BIO_GETATTR response, d_getattr(struct bio *). This function returns -1 if not handled, otherwise it returns 0 or an errno to be passed to g_io_deliver(). sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Don't copy the serial number to dp->d_ident anymore, as the CAM XPT is now responsible for returning this information via d_getattr()->(a)dagetattr()->xpt_getatr(). sys/geom/geom_dev.c: - Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM attribute "GEOM::physpath", if possible. If the attribute request returns a zero-length string, ENOENT is returned. usr.sbin/diskinfo/diskinfo.c: - If the DIOCGPHYSPATH ioctl is successful, report physical path data when diskinfo is executed with the '-v' option. Submitted by: will Reviewed by: gibbs Sponsored by: Spectra Logic Corporation Add generic attribute change notification support to GEOM. sys/sys/geom/geom.h: Add a new attrchanged method field to both g_class and g_geom. sys/sys/geom/geom.h: sys/geom/geom_event.c: - Provide the g_attr_changed() function that providers can use to advertise attribute changes. - Perform delivery of attribute change notifications from a thread context via the standard GEOM event mechanism. sys/geom/geom_subr.c: Inherit the attrchanged method from class to geom (class instance). sys/geom/geom_disk.c: Provide disk_attr_changed() to provide g_attr_changed() access to consumers of the disk API. sys/cam/scsi/scsi_pass.c: sys/cam/scsi/scsi_da.c: sys/geom/geom_dev.c: sys/geom/geom_disk.c: Use attribute changed events to track updates to physical path information. sys/cam/scsi/scsi_da.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, and the updated buffer type references our physical path attribute, emit a GEOM attribute changed event via the disk_attr_changed() API. sys/cam/scsi/scsi_pass.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, update the physical patch devfs alias for this pass instance. Submitted by: gibbs Sponsored by: Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
gp = dp->d_geom;
if (gp != NULL)
LIST_FOREACH(pp, &gp->provider, provider)
(void)g_attr_changed(pp, attr, flag);
DRY on buffer sizes. Update to r298420. sys/geom/geom_disk.c: In disk_attr_changed, don't repeat a buffer size. Reported by: ngie, hselasky MFC after: 4 weeks X-MFC-With: 298420 Sponsored by: Spectra Logic Corp
2016-04-21 21:13:41 +00:00
snprintf(devnamebuf, sizeof(devnamebuf), "devname=%s%d", dp->d_name,
dp->d_unit);
Notify userspace listeners when geom disk attributes have changed sys/geom/geom_disk.c: disk_attr_changed(): Generate a devctl event of type GEOM:<attr> for every call. MFC after: 4 weeks Sponsored by: Spectra Logic Corp Differential Revision: https://reviews.freebsd.org/D5952
2016-04-21 16:43:15 +00:00
devctl_notify("GEOM", "disk", attr, devnamebuf);
Plumb device physical path reporting from CAM devices, through GEOM and DEVFS, and make it accessible via the diskinfo utility. Extend GEOM's generic attribute query mechanism into generic disk consumers. sys/geom/geom_disk.c: sys/geom/geom_disk.h: sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Allow disk providers to implement a new method which can override the default BIO_GETATTR response, d_getattr(struct bio *). This function returns -1 if not handled, otherwise it returns 0 or an errno to be passed to g_io_deliver(). sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Don't copy the serial number to dp->d_ident anymore, as the CAM XPT is now responsible for returning this information via d_getattr()->(a)dagetattr()->xpt_getatr(). sys/geom/geom_dev.c: - Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM attribute "GEOM::physpath", if possible. If the attribute request returns a zero-length string, ENOENT is returned. usr.sbin/diskinfo/diskinfo.c: - If the DIOCGPHYSPATH ioctl is successful, report physical path data when diskinfo is executed with the '-v' option. Submitted by: will Reviewed by: gibbs Sponsored by: Spectra Logic Corporation Add generic attribute change notification support to GEOM. sys/sys/geom/geom.h: Add a new attrchanged method field to both g_class and g_geom. sys/sys/geom/geom.h: sys/geom/geom_event.c: - Provide the g_attr_changed() function that providers can use to advertise attribute changes. - Perform delivery of attribute change notifications from a thread context via the standard GEOM event mechanism. sys/geom/geom_subr.c: Inherit the attrchanged method from class to geom (class instance). sys/geom/geom_disk.c: Provide disk_attr_changed() to provide g_attr_changed() access to consumers of the disk API. sys/cam/scsi/scsi_pass.c: sys/cam/scsi/scsi_da.c: sys/geom/geom_dev.c: sys/geom/geom_disk.c: Use attribute changed events to track updates to physical path information. sys/cam/scsi/scsi_da.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, and the updated buffer type references our physical path attribute, emit a GEOM attribute changed event via the disk_attr_changed() API. sys/cam/scsi/scsi_pass.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, update the physical patch devfs alias for this pass instance. Submitted by: gibbs Sponsored by: Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
}
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
void
disk_media_changed(struct disk *dp, int flag)
{
struct g_geom *gp;
struct g_provider *pp;
gp = dp->d_geom;
if (gp != NULL) {
Following r241022, replace iteration over the provider list on media events by taking first one and asserting that there is no others. MFC after: 1 week
2013-04-05 13:11:28 +00:00
pp = LIST_FIRST(&gp->provider);
if (pp != NULL) {
KASSERT(LIST_NEXT(pp, provider) == NULL,
("geom %p has more than one provider", gp));
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
g_media_changed(pp, flag);
Following r241022, replace iteration over the provider list on media events by taking first one and asserting that there is no others. MFC after: 1 week
2013-04-05 13:11:28 +00:00
}
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
}
}
void
disk_media_gone(struct disk *dp, int flag)
{
struct g_geom *gp;
struct g_provider *pp;
gp = dp->d_geom;
if (gp != NULL) {
Following r241022, replace iteration over the provider list on media events by taking first one and asserting that there is no others. MFC after: 1 week
2013-04-05 13:11:28 +00:00
pp = LIST_FIRST(&gp->provider);
if (pp != NULL) {
KASSERT(LIST_NEXT(pp, provider) == NULL,
("geom %p has more than one provider", gp));
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
g_media_gone(pp, flag);
Following r241022, replace iteration over the provider list on media events by taking first one and asserting that there is no others. MFC after: 1 week
2013-04-05 13:11:28 +00:00
}
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
}
}
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
int
disk_resize(struct disk *dp, int flag)
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
{
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
if (dp->d_destroyed || dp->d_geom == NULL)
return (0);
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
2012-10-29 17:52:43 +00:00
return (g_post_event(g_disk_resize, dp, flag, NULL));
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
2012-07-07 21:28:31 +00:00
}
Implement the "kern.disks" sysctl in GEOM. This makes "mdconfig -l" work again. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:15:26 +00:00
static void
Change events to have an array of "void *" references, and give the event posting functions varargs to fill these. Attribute g_call_me() to appropriate g_geom's where necessary. Add a flag argument to g_call_me() methods which will be used to signal cancellation of events in the future. This commit should be a no-op.
2003-04-02 20:41:18 +00:00
g_kern_disks(void *p, int flag __unused)
Implement the "kern.disks" sysctl in GEOM. This makes "mdconfig -l" work again. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:15:26 +00:00
{
struct sbuf *sb;
struct g_geom *gp;
char *sp;
sb = p;
sp = "";
g_topology_assert();
LIST_FOREACH(gp, &g_disk_class.geom, geom) {
sbuf_printf(sb, "%s%s", sp, gp->name);
sp = " ";
}
sbuf_finish(sb);
}
static int
sysctl_disks(SYSCTL_HANDLER_ARGS)
{
int error;
struct sbuf *sb;
Add sbuf_new_auto as a shortcut for the very common case of creating a completely dynamic sbuf. Obtained from: Varnish MFC after: 2 weeks
2008-08-09 11:14:05 +00:00
sb = sbuf_new_auto();
Introduce a g_waitfor_event() function which posts an event and waits for it to be run (or cancelled) and use this instead of home-rolled versions.
2003-04-23 21:28:27 +00:00
g_waitfor_event(g_kern_disks, sb, M_WAITOK, NULL);
Rename g_call_me() to g_post_event(), and give it a flag argument to determine if we can M_WAITOK in malloc.
2003-04-23 20:46:12 +00:00
error = SYSCTL_OUT(req, sbuf_data(sb), sbuf_len(sb) + 1);
Implement the "kern.disks" sysctl in GEOM. This makes "mdconfig -l" work again. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:15:26 +00:00
sbuf_delete(sb);
return error;
}
Remove the CTLFLAG_NOLOCK as it seems to be both unused and unfunctional. Wiring the user buffer has only been done explicitly since r101422. Mark the kern.disks sysctl as MPSAFE since it is and it seems to have been mis-using the NOLOCK flag. Partially break the KPI (but not the KBI) for the sysctl_req 'lock' field since this member should be private and the "REQ_LOCKED" state seems meaningless now.
2011-01-26 22:48:09 +00:00
SYSCTL_PROC(_kern, OID_AUTO, disks,
CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0,
Implement the "kern.disks" sysctl in GEOM. This makes "mdconfig -l" work again. Sponsored by: DARPA & NAI Labs.
2002-10-04 10:15:26 +00:00
sysctl_disks, "A", "names of available disks");
Reference in New Issue Copy Permalink