d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27a4d8916d
freebsd-skq/sys/dev/mfi/mfivar.h

605 lines
19 KiB
C
Raw Normal View History

Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
/*-
* Copyright (c) 2006 IronPort Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Update the MFI driver to support new "1078" series of hardware. This includes the upcoming Dell PERC6 series. Many thanks to LSI for contributing this code. Submitted by: LSI Approved by: re
2007-08-25 23:58:45 +00:00
/*-
* Copyright (c) 2007 LSI Corp.
* Copyright (c) 2007 Rajesh Prabhakaran.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
#ifndef _MFIVAR_H
#define _MFIVAR_H
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Teach the mfi(4) driver to handle requests from userland management applications to add and remove volumes. MFC after: 1 week Approved by: re (bmah) Reviewed by: ambrisko, scottl
2007-08-13 19:29:17 +00:00
#include <sys/lock.h>
#include <sys/sx.h>
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
#include <sys/types.h>
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
#include <sys/taskqueue.h>
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
/*
* SCSI structures and definitions are used from here, but no linking
* requirements are made to CAM.
*/
#include <cam/scsi/scsi_all.h>
struct mfi_hwcomms {
uint32_t hw_pi;
uint32_t hw_ci;
uint32_t hw_reply_q[1];
};
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
#define MEGASAS_MAX_NAME 32
#define MEGASAS_VERSION "4.23"
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_softc;
Collapse the mfi_ld object. Add an ioctl to help management apps map array Id's to FreeBSD device names.
2007-05-10 15:33:41 +00:00
struct disk;
Catch up to driver changes required for the mfip sub-driver.
2007-05-16 17:23:36 +00:00
struct ccb_hdr;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_command {
TAILQ_ENTRY(mfi_command) cm_link;
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
time_t cm_timestamp;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_softc *cm_sc;
union mfi_frame *cm_frame;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
bus_addr_t cm_frame_busaddr;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_sense *cm_sense;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
bus_addr_t cm_sense_busaddr;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
bus_dmamap_t cm_dmamap;
union mfi_sgl *cm_sg;
void *cm_data;
int cm_len;
- Add special support for the MFI_CMD ioctl with MFI_CMD_STP command, used by present MegaCLI version. It has some special meaning for the first s/g list entry, while the main s/g list begins from the the second entry, and those lists should remain separate after loading to the busdma map. - Fix bug in 32bit ioctl compatibility shims when s/g list consists of more then on element. Sponsored by: iXsystems, inc. MFC after: 3 days
2011-09-29 08:37:53 +00:00
int cm_stp_len;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
int cm_total_frame_size;
int cm_extra_frames;
int cm_flags;
#define MFI_CMD_MAPPED (1<<0)
#define MFI_CMD_DATAIN (1<<1)
#define MFI_CMD_DATAOUT (1<<2)
#define MFI_CMD_COMPLETED (1<<3)
#define MFI_CMD_POLLED (1<<4)
#define MFI_ON_MFIQ_FREE (1<<5)
#define MFI_ON_MFIQ_READY (1<<6)
#define MFI_ON_MFIQ_BUSY (1<<7)
#define MFI_ON_MFIQ_MASK ((1<<5)|(1<<6)|(1<<7))
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
uint8_t retry_for_fw_reset;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
void (* cm_complete)(struct mfi_command *cm);
void *cm_private;
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
int cm_index;
Add in a couple of things: - In the ioctl path let command get queued up and return when complete _without_ blocking the driving waiting for the response. This way the driver doesn't "lock up" for ~30s during a flash command. Submitted by scottl. - Add a guard so that if a DCMD of 0 is sent down the ioctl path don't send it to the controller. Return with a status of OK. This is a little strange since MegaCli doesn't seem to like something and will issue some DCMD of 0. This doesn't happen under Linux. So the emulation needs to be improved but I'm not sure what. Another strange thing is that when a DCMD of 0 gets issued under i386 the controller returns OK but in amd64 the context is messed up. - Add a guard so the context has to be with-in the legal limit so we get a reasonable error assertion versus random panic. It's going to be a challenge to figure out why MegaCli is not totally happy and then sends some bogus commands. This means that flashing firmware via the Linux tool won't work since it generates a DCMD of 0 when it should be opening the firmware for a flash update. Without this problem flashing works fine. This means there is no publicly available tool to upgrade the RAID firmware under FreeBSD right now. I plan to MFC all of the mfi changes to 6.X shortly. This might not include the SCSI pass-through changes. Submitted by: scottl Reviewed by: scottl MFC after: 3 days
2007-06-04 16:39:22 +00:00
int cm_error;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
};
Collapse the mfi_ld object. Add an ioctl to help management apps map array Id's to FreeBSD device names.
2007-05-10 15:33:41 +00:00
struct mfi_disk {
TAILQ_ENTRY(mfi_disk) ld_link;
device_t ld_dev;
int ld_id;
int ld_unit;
struct mfi_softc *ld_controller;
Instead of using scsi probes to do device discovery, use the firmware commands to grab the device listing. This resolves issues using multiple volumes, where each volume was actually internally pointing to target 0.
2006-06-20 22:41:44 +00:00
struct mfi_ld_info *ld_info;
Collapse the mfi_ld object. Add an ioctl to help management apps map array Id's to FreeBSD device names.
2007-05-10 15:33:41 +00:00
struct disk *ld_disk;
int ld_flags;
#define MFI_DISK_FLAGS_OPEN 0x01
Teach the mfi(4) driver to handle requests from userland management applications to add and remove volumes. MFC after: 1 week Approved by: re (bmah) Reviewed by: ambrisko, scottl
2007-08-13 19:29:17 +00:00
#define MFI_DISK_FLAGS_DISABLED 0x02
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
};
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct mfi_system_pd {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
TAILQ_ENTRY(mfi_system_pd) pd_link;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
device_t pd_dev;
int pd_id;
int pd_unit;
struct mfi_softc *pd_controller;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
struct mfi_pd_info *pd_info;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct disk *pd_disk;
int pd_flags;
};
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
struct mfi_evt_queue_elm {
TAILQ_ENTRY(mfi_evt_queue_elm) link;
struct mfi_evt_detail detail;
};
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems.
2006-05-18 23:30:48 +00:00
struct mfi_aen {
TAILQ_ENTRY(mfi_aen) aen_link;
struct proc *p;
};
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct mfi_skinny_dma_info {
Change typedef atomic_t to struct mfi_atomic to avoid name space collision and some couple more style changes.
2012-04-02 02:22:22 +00:00
bus_dma_tag_t dmat[514];
bus_dmamap_t dmamap[514];
uint32_t mem[514];
int noofmaps;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
};
Move struct megasas_sge from mfi_ioctl.h to mfivar.h so we can remove including machine/bus.h. Add some more mfi_ prefixes to avoid name space pollution. This should address the last tinderbox issues.
2012-04-02 19:13:02 +00:00
struct megasas_sge
{
bus_addr_t phys_addr;
uint32_t length;
};
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct mfi_cmd_tbolt;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_softc {
device_t mfi_dev;
int mfi_flags;
#define MFI_FLAGS_SG64 (1<<0)
#define MFI_FLAGS_QFRZN (1<<1)
#define MFI_FLAGS_OPEN (1<<2)
- Add a command validator for use in debugging. - Fix the locking protocol to eliminate races between normal I/O and AENs. - Various small improvements and usability tweaks. Sponsored by: IronPort Portions Submitted by: Doug Ambrisko
2006-10-16 04:18:38 +00:00
#define MFI_FLAGS_STOP (1<<3)
Update the MFI driver to support new "1078" series of hardware. This includes the upcoming Dell PERC6 series. Many thanks to LSI for contributing this code. Submitted by: LSI Approved by: re
2007-08-25 23:58:45 +00:00
#define MFI_FLAGS_1064R (1<<4)
#define MFI_FLAGS_1078 (1<<5)
- Fix from jhb for failing I/O request when bus_dmamap_load fails. - Fix to ioctl path in which the length could be 0 which means no data in/out from LSI. - Fix to ioctl path in which the data in the sense data space of the ioctl packet is a really a pointer to some location in user-space. From LSI re-worked a bit by me. - Add HW support for next gen cards from LSI. Thanks to LSI for their support! Submitted by: jhb, LSI MFC after: 3 days
2008-11-12 22:44:50 +00:00
#define MFI_FLAGS_GEN2 (1<<6)
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
#define MFI_FLAGS_SKINNY (1<<7)
#define MFI_FLAGS_TBOLT (1<<8)
// Start: LSIP200113393
bus_dma_tag_t verbuf_h_dmat;
bus_dmamap_t verbuf_h_dmamap;
Fix inappropriate data type for two bus_dmamap_t variables that were causing PAE to insta-panic on startup. Remove one unused variable that was commented out. Reviewed by: ambrisko@ Obtained from: jhb@ peter@ bz@ and countless others during BSDCAN MFC after: 3 days
2012-05-12 03:30:50 +00:00
bus_dmamap_t verbuf_h_busaddr;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
uint32_t *verbuf;
void *kbuff_arr[MAX_IOCTL_SGE];
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
bus_dma_tag_t mfi_kbuff_arr_dmat[2];
bus_dmamap_t mfi_kbuff_arr_dmamap[2];
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t mfi_kbuff_arr_busaddr[2];
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_hwcomms *mfi_comms;
TAILQ_HEAD(,mfi_command) mfi_free;
TAILQ_HEAD(,mfi_command) mfi_ready;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
TAILQ_HEAD(BUSYQ,mfi_command) mfi_busy;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct bio_queue_head mfi_bioq;
struct mfi_qstat mfi_qstat[MFIQ_COUNT];
struct resource *mfi_regs_resource;
bus_space_handle_t mfi_bhandle;
bus_space_tag_t mfi_btag;
int mfi_regs_rid;
bus_dma_tag_t mfi_parent_dmat;
bus_dma_tag_t mfi_buffer_dmat;
bus_dma_tag_t mfi_comms_dmat;
bus_dmamap_t mfi_comms_dmamap;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t mfi_comms_busaddr;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
bus_dma_tag_t mfi_frames_dmat;
bus_dmamap_t mfi_frames_dmamap;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t mfi_frames_busaddr;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
union mfi_frame *mfi_frames;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
bus_dma_tag_t mfi_tb_init_dmat;
bus_dmamap_t mfi_tb_init_dmamap;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t mfi_tb_init_busaddr;
bus_addr_t mfi_tb_ioc_init_busaddr;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
union mfi_frame *mfi_tb_init;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
TAILQ_HEAD(,mfi_evt_queue_elm) mfi_evt_queue;
struct task mfi_evt_task;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
struct task mfi_map_sync_task;
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems.
2006-05-18 23:30:48 +00:00
TAILQ_HEAD(,mfi_aen) mfi_aen_pids;
struct mfi_command *mfi_aen_cm;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct mfi_command *mfi_skinny_cm;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
struct mfi_command *mfi_map_sync_cm;
int cm_aen_abort;
int cm_map_abort;
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems.
2006-05-18 23:30:48 +00:00
uint32_t mfi_aen_triggered;
uint32_t mfi_poll_waiting;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
uint32_t mfi_boot_seq_num;
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems.
2006-05-18 23:30:48 +00:00
struct selinfo mfi_select;
Teach the mfi(4) driver to handle requests from userland management applications to add and remove volumes. MFC after: 1 week Approved by: re (bmah) Reviewed by: ambrisko, scottl
2007-08-13 19:29:17 +00:00
int mfi_delete_busy_volumes;
int mfi_keep_deleted_volumes;
int mfi_detaching;
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems.
2006-05-18 23:30:48 +00:00
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
bus_dma_tag_t mfi_sense_dmat;
bus_dmamap_t mfi_sense_dmamap;
Fix inappropriate data type for two bus_dmamap_t variables that were causing PAE to insta-panic on startup. Remove one unused variable that was commented out. Reviewed by: ambrisko@ Obtained from: jhb@ peter@ bz@ and countless others during BSDCAN MFC after: 3 days
2012-05-12 03:30:50 +00:00
bus_dmamap_t mfi_sense_busaddr;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mfi_sense *mfi_sense;
struct resource *mfi_irq;
void *mfi_intr;
int mfi_irq_rid;
struct intr_config_hook mfi_ich;
eventhandler_tag eh;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* OCR flags */
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
uint8_t adpreset;
uint8_t issuepend_done;
uint8_t disableOnlineCtrlReset;
uint32_t mfiStatus;
uint32_t last_seq_num;
uint32_t volatile hw_crit_error;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
/*
* Allocation for the command array. Used as an indexable array to
* recover completed commands.
*/
struct mfi_command *mfi_commands;
/*
* How many commands were actually allocated
*/
int mfi_total_cmds;
/*
* How many commands the firmware can handle. Also how big the reply
* queue is, minus 1.
*/
int mfi_max_fw_cmds;
/*
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
* How many S/G elements we'll ever actually use
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
*/
Change some variable names and update some comments to help clarify some confusing issues.
2006-09-20 06:58:02 +00:00
int mfi_max_sge;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
/*
* How many bytes a compound frame is, including all of the extra frames
* that are used for S/G elements.
*/
Change some variable names and update some comments to help clarify some confusing issues.
2006-09-20 06:58:02 +00:00
int mfi_cmd_size;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
/*
* How large an S/G element is. Used to calculate the number of single
* frames in a command.
*/
Change some variable names and update some comments to help clarify some confusing issues.
2006-09-20 06:58:02 +00:00
int mfi_sge_size;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
/*
* Max number of sectors that the firmware allows
*/
uint32_t mfi_max_io;
Collapse the mfi_ld object. Add an ioctl to help management apps map array Id's to FreeBSD device names.
2007-05-10 15:33:41 +00:00
TAILQ_HEAD(,mfi_disk) mfi_ld_tqh;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
TAILQ_HEAD(,mfi_system_pd) mfi_syspd_tqh;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
eventhandler_tag mfi_eh;
struct cdev *mfi_cdev;
Catch up to driver changes required for the mfip sub-driver.
2007-05-16 17:23:36 +00:00
TAILQ_HEAD(, ccb_hdr) mfi_cam_ccbq;
struct mfi_command * (* mfi_cam_start)(void *);
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
struct callout mfi_watchdog_callout;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
struct mtx mfi_io_lock;
Teach the mfi(4) driver to handle requests from userland management applications to add and remove volumes. MFC after: 1 week Approved by: re (bmah) Reviewed by: ambrisko, scottl
2007-08-13 19:29:17 +00:00
struct sx mfi_config_lock;
Update the MFI driver to support new "1078" series of hardware. This includes the upcoming Dell PERC6 series. Many thanks to LSI for contributing this code. Submitted by: LSI Approved by: re
2007-08-25 23:58:45 +00:00
/* Controller type specific interfaces */
void (*mfi_enable_intr)(struct mfi_softc *sc);
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
void (*mfi_disable_intr)(struct mfi_softc *sc);
Update the MFI driver to support new "1078" series of hardware. This includes the upcoming Dell PERC6 series. Many thanks to LSI for contributing this code. Submitted by: LSI Approved by: re
2007-08-25 23:58:45 +00:00
int32_t (*mfi_read_fw_status)(struct mfi_softc *sc);
int (*mfi_check_clear_intr)(struct mfi_softc *sc);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
void (*mfi_issue_cmd)(struct mfi_softc *sc, bus_addr_t bus_add,
uint32_t frame_cnt);
int (*mfi_adp_reset)(struct mfi_softc *sc);
int (*mfi_adp_check_reset)(struct mfi_softc *sc);
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
/* ThunderBolt */
uint32_t mfi_tbolt;
uint32_t MFA_enabled;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* Single Reply structure size */
uint16_t reply_size;
/* Singler message size. */
uint16_t raid_io_msg_size;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
TAILQ_HEAD(TB, mfi_cmd_tbolt) mfi_cmd_tbolt_tqh;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* ThunderBolt base contiguous memory mapping. */
bus_dma_tag_t mfi_tb_dmat;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
bus_dmamap_t mfi_tb_dmamap;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t mfi_tb_busaddr;
/* ThunderBolt Contiguous DMA memory Mapping */
uint8_t * request_message_pool;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
uint8_t * request_message_pool_align;
uint8_t * request_desc_pool;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t request_msg_busaddr;
bus_addr_t reply_frame_busaddr;
bus_addr_t sg_frame_busaddr;
/* ThunderBolt IOC Init Descriptor */
bus_dma_tag_t mfi_tb_ioc_init_dmat;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
bus_dmamap_t mfi_tb_ioc_init_dmamap;
uint8_t * mfi_tb_ioc_init_desc;
struct mfi_cmd_tbolt **mfi_cmd_pool_tbolt;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* Virtual address of reply Frame Pool */
struct mfi_mpi2_reply_header* reply_frame_pool;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct mfi_mpi2_reply_header* reply_frame_pool_align;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* Last reply frame address */
uint8_t * reply_pool_limit;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
uint16_t last_reply_idx;
uint8_t max_SGEs_in_chain_message;
uint8_t max_SGEs_in_main_message;
uint8_t chain_offset_value_for_main_message;
uint8_t chain_offset_value_for_mpt_ptmsg;
};
union desc_value {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
uint64_t word;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
struct {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
uint32_t low;
uint32_t high;
}u;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
};
// TODO find the right definition
#define XXX_MFI_CMD_OP_INIT2 0x9
/*
* Request descriptor types
*/
#define MFI_REQ_DESCRIPT_FLAGS_LD_IO 0x7
#define MFI_REQ_DESCRIPT_FLAGS_MFA 0x1
#define MFI_REQ_DESCRIPT_FLAGS_TYPE_SHIFT 0x1
#define MFI_FUSION_FP_DEFAULT_TIMEOUT 0x14
#define MFI_LOAD_BALANCE_FLAG 0x1
#define MFI_DCMD_MBOX_PEND_FLAG 0x1
//#define MR_PROT_INFO_TYPE_CONTROLLER 0x08
#define MEGASAS_SCSI_VARIABLE_LENGTH_CMD 0x7f
#define MEGASAS_SCSI_SERVICE_ACTION_READ32 0x9
#define MEGASAS_SCSI_SERVICE_ACTION_WRITE32 0xB
#define MEGASAS_SCSI_ADDL_CDB_LEN 0x18
#define MEGASAS_RD_WR_PROTECT_CHECK_ALL 0x20
#define MEGASAS_RD_WR_PROTECT_CHECK_NONE 0x60
#define MEGASAS_EEDPBLOCKSIZE 512
struct mfi_cmd_tbolt {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
union mfi_mpi2_request_descriptor *request_desc;
struct mfi_mpi2_request_raid_scsi_io *io_request;
bus_addr_t io_request_phys_addr;
bus_addr_t sg_frame_phys_addr;
bus_addr_t sense_phys_addr;
MPI2_SGE_IO_UNION *sg_frame;
uint8_t *sense;
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
TAILQ_ENTRY(mfi_cmd_tbolt) next;
/*
* Context for a MFI frame.
* Used to get the mfi cmd from list when a MFI cmd is completed
*/
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
uint32_t sync_cmd_idx;
uint16_t index;
uint8_t status;
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
};
extern int mfi_attach(struct mfi_softc *);
extern void mfi_free(struct mfi_softc *);
extern int mfi_shutdown(struct mfi_softc *);
extern void mfi_startio(struct mfi_softc *);
extern void mfi_disk_complete(struct bio *);
Teach the mfi(4) driver to handle requests from userland management applications to add and remove volumes. MFC after: 1 week Approved by: re (bmah) Reviewed by: ambrisko, scottl
2007-08-13 19:29:17 +00:00
extern int mfi_disk_disable(struct mfi_disk *);
extern void mfi_disk_enable(struct mfi_disk *);
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
extern int mfi_dump_blocks(struct mfi_softc *, int id, uint64_t, void *, int);
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
extern int mfi_syspd_disable(struct mfi_system_pd *);
extern void mfi_syspd_enable(struct mfi_system_pd *);
extern int mfi_dump_syspd_blocks(struct mfi_softc *, int id, uint64_t, void *,
int);
extern int mfi_transition_firmware(struct mfi_softc *sc);
extern int mfi_aen_setup(struct mfi_softc *sc, uint32_t seq_start);
extern void mfi_complete(struct mfi_softc *sc, struct mfi_command *cm);
extern int mfi_mapcmd(struct mfi_softc *sc,struct mfi_command *cm);
extern int mfi_wait_command(struct mfi_softc *sc, struct mfi_command *cm);
extern void mfi_tbolt_enable_intr_ppc(struct mfi_softc *);
extern void mfi_tbolt_disable_intr_ppc(struct mfi_softc *);
extern int32_t mfi_tbolt_read_fw_status_ppc(struct mfi_softc *);
extern int32_t mfi_tbolt_check_clear_intr_ppc(struct mfi_softc *);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
extern void mfi_tbolt_issue_cmd_ppc(struct mfi_softc *, bus_addr_t, uint32_t);
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
extern void mfi_tbolt_init_globals(struct mfi_softc*);
extern uint32_t mfi_tbolt_get_memory_requirement(struct mfi_softc *);
extern int mfi_tbolt_init_desc_pool(struct mfi_softc *, uint8_t *, uint32_t);
extern int mfi_tbolt_init_MFI_queue(struct mfi_softc *);
extern void mfi_intr_tbolt(void *arg);
extern int mfi_tbolt_alloc_cmd(struct mfi_softc *sc);
extern int mfi_tbolt_send_frame(struct mfi_softc *sc, struct mfi_command *cm);
extern int mfi_tbolt_adp_reset(struct mfi_softc *sc);
extern int mfi_tbolt_reset(struct mfi_softc *sc);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
extern void mfi_tbolt_sync_map_info(struct mfi_softc *sc);
extern void mfi_handle_map_sync(void *context, int pending);
extern int mfi_dcmd_command(struct mfi_softc *, struct mfi_command **,
uint32_t, void **, size_t);
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
#define MFIQ_ADD(sc, qname) \
do { \
struct mfi_qstat *qs; \
\
qs = &(sc)->mfi_qstat[qname]; \
qs->q_length++; \
if (qs->q_length > qs->q_max) \
qs->q_max = qs->q_length; \
} while (0)
#define MFIQ_REMOVE(sc, qname) (sc)->mfi_qstat[qname].q_length--
#define MFIQ_INIT(sc, qname) \
do { \
sc->mfi_qstat[qname].q_length = 0; \
sc->mfi_qstat[qname].q_max = 0; \
} while (0)
#define MFIQ_COMMAND_QUEUE(name, index) \
static __inline void \
mfi_initq_ ## name (struct mfi_softc *sc) \
{ \
TAILQ_INIT(&sc->mfi_ ## name); \
MFIQ_INIT(sc, index); \
} \
static __inline void \
mfi_enqueue_ ## name (struct mfi_command *cm) \
{ \
if ((cm->cm_flags & MFI_ON_MFIQ_MASK) != 0) { \
printf("command %p is on another queue, " \
"flags = %#x\n", cm, cm->cm_flags); \
panic("command is on another queue"); \
} \
TAILQ_INSERT_TAIL(&cm->cm_sc->mfi_ ## name, cm, cm_link); \
cm->cm_flags |= MFI_ON_ ## index; \
MFIQ_ADD(cm->cm_sc, index); \
} \
static __inline void \
mfi_requeue_ ## name (struct mfi_command *cm) \
{ \
if ((cm->cm_flags & MFI_ON_MFIQ_MASK) != 0) { \
printf("command %p is on another queue, " \
"flags = %#x\n", cm, cm->cm_flags); \
panic("command is on another queue"); \
} \
TAILQ_INSERT_HEAD(&cm->cm_sc->mfi_ ## name, cm, cm_link); \
cm->cm_flags |= MFI_ON_ ## index; \
MFIQ_ADD(cm->cm_sc, index); \
} \
static __inline struct mfi_command * \
mfi_dequeue_ ## name (struct mfi_softc *sc) \
{ \
struct mfi_command *cm; \
\
if ((cm = TAILQ_FIRST(&sc->mfi_ ## name)) != NULL) { \
if ((cm->cm_flags & MFI_ON_ ## index) == 0) { \
printf("command %p not in queue, " \
"flags = %#x, bit = %#x\n", cm, \
cm->cm_flags, MFI_ON_ ## index); \
panic("command not in queue"); \
} \
TAILQ_REMOVE(&sc->mfi_ ## name, cm, cm_link); \
cm->cm_flags &= ~MFI_ON_ ## index; \
MFIQ_REMOVE(sc, index); \
} \
return (cm); \
} \
static __inline void \
mfi_remove_ ## name (struct mfi_command *cm) \
{ \
if ((cm->cm_flags & MFI_ON_ ## index) == 0) { \
printf("command %p not in queue, flags = %#x, " \
"bit = %#x\n", cm, cm->cm_flags, \
MFI_ON_ ## index); \
panic("command not in queue"); \
} \
TAILQ_REMOVE(&cm->cm_sc->mfi_ ## name, cm, cm_link); \
cm->cm_flags &= ~MFI_ON_ ## index; \
MFIQ_REMOVE(cm->cm_sc, index); \
} \
struct hack
MFIQ_COMMAND_QUEUE(free, MFIQ_FREE);
MFIQ_COMMAND_QUEUE(ready, MFIQ_READY);
MFIQ_COMMAND_QUEUE(busy, MFIQ_BUSY);
static __inline void
mfi_initq_bio(struct mfi_softc *sc)
{
bioq_init(&sc->mfi_bioq);
MFIQ_INIT(sc, MFIQ_BIO);
}
static __inline void
mfi_enqueue_bio(struct mfi_softc *sc, struct bio *bp)
{
bioq_insert_tail(&sc->mfi_bioq, bp);
MFIQ_ADD(sc, MFIQ_BIO);
}
static __inline struct bio *
mfi_dequeue_bio(struct mfi_softc *sc)
{
struct bio *bp;
if ((bp = bioq_first(&sc->mfi_bioq)) != NULL) {
bioq_remove(&sc->mfi_bioq, bp);
MFIQ_REMOVE(sc, MFIQ_BIO);
}
return (bp);
}
Fix an implicit dependency between the MFI driver and CAM that had grown due to an API change in CAM. It's once again possible to link a static kernel with 'mfi' without requiring 'scbus' as well. Ditto for KLD loading. Submitted by: kib Reviewed by: ken MFC after: 3 days
2011-10-29 06:26:49 +00:00
/*
* This is from the original scsi_extract_sense() in CAM. It's copied
* here because CAM now uses a non-inline version that follows more complex
* additions to the SPC spec, and we don't want to force a dependency on
* the CAM module for such a trivial action.
*/
static __inline void
mfi_extract_sense(struct scsi_sense_data_fixed *sense,
int *error_code, int *sense_key, int *asc, int *ascq)
{
*error_code = sense->error_code & SSD_ERRCODE;
*sense_key = sense->flags & SSD_KEY;
*asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0;
*ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0;
}
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
static __inline void
mfi_print_sense(struct mfi_softc *sc, void *sense)
{
int error, key, asc, ascq;
Fix an implicit dependency between the MFI driver and CAM that had grown due to an API change in CAM. It's once again possible to link a static kernel with 'mfi' without requiring 'scbus' as well. Ditto for KLD loading. Submitted by: kib Reviewed by: ken MFC after: 3 days
2011-10-29 06:26:49 +00:00
mfi_extract_sense((struct scsi_sense_data_fixed *)sense,
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
&error, &key, &asc, &ascq);
device_printf(sc->mfi_dev, "sense error %d, sense_key %d, "
"asc %d, ascq %d\n", error, key, asc, ascq);
}
#define MFI_WRITE4(sc, reg, val) bus_space_write_4((sc)->mfi_btag, \
sc->mfi_bhandle, (reg), (val))
#define MFI_READ4(sc, reg) bus_space_read_4((sc)->mfi_btag, \
(sc)->mfi_bhandle, (reg))
#define MFI_WRITE2(sc, reg, val) bus_space_write_2((sc)->mfi_btag, \
sc->mfi_bhandle, (reg), (val))
#define MFI_READ2(sc, reg) bus_space_read_2((sc)->mfi_btag, \
(sc)->mfi_bhandle, (reg))
#define MFI_WRITE1(sc, reg, val) bus_space_write_1((sc)->mfi_btag, \
sc->mfi_bhandle, (reg), (val))
#define MFI_READ1(sc, reg) bus_space_read_1((sc)->mfi_btag, \
(sc)->mfi_bhandle, (reg))
MALLOC_DECLARE(M_MFIBUF);
Add single-message MSI support to mfi(4). It is disabled by default but can be enabled via the hw.mfi.msi tunable. Many mfi(4) controllers also support MSI-X, but in testing it seems that many adapters do not work with MSI-X but do work with MSI. MFC after: 2 weeks
2011-11-16 15:39:27 +00:00
SYSCTL_DECL(_hw_mfi);
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
#define MFI_RESET_WAIT_TIME 180
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
#define MFI_CMD_TIMEOUT 30
First cut at updating mfi(4) to support newer LSI MegaRAID SAS cards. Specifically, add support for "Drake Skinny" and "ThunderBolt" LSI cards. Initial code was supplied by LSI under BSD license. Several improvements were done by myself. Such things like making it work in a static kernel, be able to boot of the RAID, performance improvements. I removed some fairly complicated code that seemed to directly access the disks under the firmware. It doesn't seem to be needed and significantly slowed down the performance of the driver and caused tons of sense errors to be reported. This code is being checked in this area so others can help me get it into shape to commit into the FreeBSD tree. Assistance has been volunteered by iXsystems. We might want to re-work the JBOD attachment that creates /dev/mfisyspd? node for each disk. Performance is faster then prior cards. It works okay with WITNESS and INVARIANTS on amd64 and i386. I recall seeing a use after free time bug with FreeBSD 8 and a Drake Skinny card with WITNESS and INVARIANTS on. First task is get all of the new structures to be named in FreeBSD style format. Next is probably to deal with the 64bit addressing changes that are mostly around the #ifdef __amd64__ checks. Thanks to LSI for providing the initial code. Obtained from: LSI
2011-11-04 02:34:52 +00:00
#define MFI_SYS_PD_IO 0
#define MFI_LD_IO 1
Move struct megasas_sge from mfi_ioctl.h to mfivar.h so we can remove including machine/bus.h. Add some more mfi_ prefixes to avoid name space pollution. This should address the last tinderbox issues.
2012-04-02 19:13:02 +00:00
#define MFI_SKINNY_MEMORY 0x02000000
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
#define MFI_MAXPHYS (128 * 1024)
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
#ifdef MFI_DEBUG
extern void mfi_print_cmd(struct mfi_command *cm);
extern void mfi_dump_cmds(struct mfi_softc *sc);
- Add a command validator for use in debugging. - Fix the locking protocol to eliminate races between normal I/O and AENs. - Various small improvements and usability tweaks. Sponsored by: IronPort Portions Submitted by: Doug Ambrisko
2006-10-16 04:18:38 +00:00
extern void mfi_validate_sg(struct mfi_softc *, struct mfi_command *, const char *, int );
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
#define MFI_PRINT_CMD(cm) mfi_print_cmd(cm)
- Add a command validator for use in debugging. - Fix the locking protocol to eliminate races between normal I/O and AENs. - Various small improvements and usability tweaks. Sponsored by: IronPort Portions Submitted by: Doug Ambrisko
2006-10-16 04:18:38 +00:00
#define MFI_DUMP_CMDS(sc) mfi_dump_cmds(sc)
#define MFI_VALIDATE_CMD(sc, cm) mfi_validate_sg(sc, cm, __FUNCTION__, __LINE__)
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
#else
#define MFI_PRINT_CMD(cm)
#define MFI_DUMP_CMDS(sc)
- Add a command validator for use in debugging. - Fix the locking protocol to eliminate races between normal I/O and AENs. - Various small improvements and usability tweaks. Sponsored by: IronPort Portions Submitted by: Doug Ambrisko
2006-10-16 04:18:38 +00:00
#define MFI_VALIDATE_CMD(sc, cm)
Add a command debugging module and a periodic watchdog timer. Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
#endif
Catch up to driver changes required for the mfip sub-driver.
2007-05-16 17:23:36 +00:00
extern void mfi_release_command(struct mfi_command *cm);
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days
2006-03-25 06:14:32 +00:00
#endif /* _MFIVAR_H */
Reference in New Issue Copy Permalink