freebsd-skq/sys/kern/vfs_vnops.c

1998 lines
50 KiB
C
Raw Normal View History

/*-
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Copyright (c) 2012 Konstantin Belousov <kib@FreeBSD.org>
* Copyright (c) 2013 The FreeBSD Foundation
*
* Portions of this software were developed by Konstantin Belousov
* under sponsorship from the FreeBSD Foundation.
*
1994-05-24 10:09:53 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)vfs_vnops.c 8.2 (Berkeley) 1/21/94
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/fcntl.h>
1994-05-24 10:09:53 +00:00
#include <sys/file.h>
#include <sys/kdb.h>
1994-05-24 10:09:53 +00:00
#include <sys/stat.h>
#include <sys/priv.h>
1994-05-24 10:09:53 +00:00
#include <sys/proc.h>
#include <sys/limits.h>
2001-10-11 17:52:20 +00:00
#include <sys/lock.h>
1994-05-24 10:09:53 +00:00
#include <sys/mount.h>
#include <sys/mutex.h>
1994-05-24 10:09:53 +00:00
#include <sys/namei.h>
#include <sys/vnode.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/filio.h>
#include <sys/resourcevar.h>
#include <sys/rwlock.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/ttycom.h>
1999-08-13 11:22:48 +00:00
#include <sys/conf.h>
#include <sys/syslog.h>
#include <sys/unistd.h>
1994-05-24 10:09:53 +00:00
#include <security/audit/audit.h>
#include <security/mac/mac_framework.h>
#include <vm/vm.h>
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
#include <vm/vm_extern.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <vm/vm_object.h>
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
#include <vm/vm_page.h>
2002-12-24 09:44:51 +00:00
static fo_rdwr_t vn_read;
static fo_rdwr_t vn_write;
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
static fo_rdwr_t vn_io_fault;
static fo_truncate_t vn_truncate;
2002-12-24 09:44:51 +00:00
static fo_ioctl_t vn_ioctl;
static fo_poll_t vn_poll;
static fo_kqfilter_t vn_kqfilter;
static fo_stat_t vn_statfile;
static fo_close_t vn_closefile;
struct fileops vnops = {
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
.fo_read = vn_io_fault,
.fo_write = vn_io_fault,
.fo_truncate = vn_truncate,
.fo_ioctl = vn_ioctl,
.fo_poll = vn_poll,
.fo_kqfilter = vn_kqfilter,
.fo_stat = vn_statfile,
.fo_close = vn_closefile,
.fo_chmod = vn_chmod,
.fo_chown = vn_chown,
.fo_flags = DFLAG_PASSABLE | DFLAG_SEEKABLE
};
int
vn_open(ndp, flagp, cmode, fp)
struct nameidata *ndp;
int *flagp, cmode;
struct file *fp;
{
struct thread *td = ndp->ni_cnd.cn_thread;
return (vn_open_cred(ndp, flagp, cmode, 0, td->td_ucred, fp));
}
1994-05-24 10:09:53 +00:00
/*
* Common code for vnode open operations via a name lookup.
* Lookup the vnode and invoke VOP_CREATE if needed.
1994-05-24 10:09:53 +00:00
* Check permissions, and call the VOP_OPEN or VOP_CREATE routine.
*
* Note that this does NOT free nameidata for the successful case,
* due to the NDINIT being done elsewhere.
1994-05-24 10:09:53 +00:00
*/
int
vn_open_cred(struct nameidata *ndp, int *flagp, int cmode, u_int vn_open_flags,
struct ucred *cred, struct file *fp)
1994-05-24 10:09:53 +00:00
{
struct vnode *vp;
struct mount *mp;
struct thread *td = ndp->ni_cnd.cn_thread;
1994-05-24 10:09:53 +00:00
struct vattr vat;
struct vattr *vap = &vat;
int fmode, error;
1994-05-24 10:09:53 +00:00
restart:
fmode = *flagp;
1994-05-24 10:09:53 +00:00
if (fmode & O_CREAT) {
ndp->ni_cnd.cn_nameiop = CREATE;
ndp->ni_cnd.cn_flags = ISOPEN | LOCKPARENT | LOCKLEAF;
if ((fmode & O_EXCL) == 0 && (fmode & O_NOFOLLOW) == 0)
1994-05-24 10:09:53 +00:00
ndp->ni_cnd.cn_flags |= FOLLOW;
if (!(vn_open_flags & VN_OPEN_NOAUDIT))
ndp->ni_cnd.cn_flags |= AUDITVNODE1;
if (vn_open_flags & VN_OPEN_NOCAPCHECK)
ndp->ni_cnd.cn_flags |= NOCAPCHECK;
bwillwrite();
if ((error = namei(ndp)) != 0)
1994-05-24 10:09:53 +00:00
return (error);
if (ndp->ni_vp == NULL) {
VATTR_NULL(vap);
vap->va_type = VREG;
vap->va_mode = cmode;
if (fmode & O_EXCL)
vap->va_vaflags |= VA_EXCLUSIVE;
if (vn_start_write(ndp->ni_dvp, &mp, V_NOWAIT) != 0) {
NDFREE(ndp, NDF_ONLY_PNBUF);
vput(ndp->ni_dvp);
if ((error = vn_start_write(NULL, &mp,
V_XSLEEP | PCATCH)) != 0)
return (error);
goto restart;
}
#ifdef MAC
error = mac_vnode_check_create(cred, ndp->ni_dvp,
&ndp->ni_cnd, vap);
if (error == 0)
#endif
error = VOP_CREATE(ndp->ni_dvp, &ndp->ni_vp,
&ndp->ni_cnd, vap);
vput(ndp->ni_dvp);
vn_finished_write(mp);
if (error) {
NDFREE(ndp, NDF_ONLY_PNBUF);
1994-05-24 10:09:53 +00:00
return (error);
}
1994-05-24 10:09:53 +00:00
fmode &= ~O_TRUNC;
vp = ndp->ni_vp;
} else {
if (ndp->ni_dvp == ndp->ni_vp)
vrele(ndp->ni_dvp);
else
vput(ndp->ni_dvp);
ndp->ni_dvp = NULL;
vp = ndp->ni_vp;
if (fmode & O_EXCL) {
error = EEXIST;
goto bad;
}
fmode &= ~O_CREAT;
}
} else {
ndp->ni_cnd.cn_nameiop = LOOKUP;
ndp->ni_cnd.cn_flags = ISOPEN |
((fmode & O_NOFOLLOW) ? NOFOLLOW : FOLLOW) | LOCKLEAF;
if (!(fmode & FWRITE))
ndp->ni_cnd.cn_flags |= LOCKSHARED;
if (!(vn_open_flags & VN_OPEN_NOAUDIT))
ndp->ni_cnd.cn_flags |= AUDITVNODE1;
if (vn_open_flags & VN_OPEN_NOCAPCHECK)
ndp->ni_cnd.cn_flags |= NOCAPCHECK;
if ((error = namei(ndp)) != 0)
1994-05-24 10:09:53 +00:00
return (error);
vp = ndp->ni_vp;
}
error = vn_open_vnode(vp, fmode, cred, td, fp);
if (error)
goto bad;
*flagp = fmode;
return (0);
bad:
NDFREE(ndp, NDF_ONLY_PNBUF);
vput(vp);
*flagp = fmode;
ndp->ni_vp = NULL;
return (error);
}
/*
* Common code for vnode open operations once a vnode is located.
* Check permissions, and call the VOP_OPEN routine.
*/
int
vn_open_vnode(struct vnode *vp, int fmode, struct ucred *cred,
struct thread *td, struct file *fp)
{
struct mount *mp;
accmode_t accmode;
struct flock lf;
int error, have_flock, lock_flags, type;
if (vp->v_type == VLNK)
return (EMLINK);
if (vp->v_type == VSOCK)
return (EOPNOTSUPP);
if (vp->v_type != VDIR && fmode & O_DIRECTORY)
return (ENOTDIR);
accmode = 0;
if (fmode & (FWRITE | O_TRUNC)) {
if (vp->v_type == VDIR)
return (EISDIR);
accmode |= VWRITE;
}
if (fmode & FREAD)
accmode |= VREAD;
if (fmode & FEXEC)
accmode |= VEXEC;
if ((fmode & O_APPEND) && (fmode & FWRITE))
accmode |= VAPPEND;
#ifdef MAC
error = mac_vnode_check_open(cred, vp, accmode);
if (error)
return (error);
#endif
1994-05-24 10:09:53 +00:00
if ((fmode & O_CREAT) == 0) {
if (accmode & VWRITE) {
error = vn_writechk(vp);
if (error)
return (error);
}
if (accmode) {
error = VOP_ACCESS(vp, accmode, cred, td);
if (error)
return (error);
1994-05-24 10:09:53 +00:00
}
}
if ((error = VOP_OPEN(vp, fmode, cred, td, fp)) != 0)
return (error);
if (fmode & (O_EXLOCK | O_SHLOCK)) {
KASSERT(fp != NULL, ("open with flock requires fp"));
lock_flags = VOP_ISLOCKED(vp);
VOP_UNLOCK(vp, 0);
lf.l_whence = SEEK_SET;
lf.l_start = 0;
lf.l_len = 0;
if (fmode & O_EXLOCK)
lf.l_type = F_WRLCK;
else
lf.l_type = F_RDLCK;
type = F_FLOCK;
if ((fmode & FNONBLOCK) == 0)
type |= F_WAIT;
error = VOP_ADVLOCK(vp, (caddr_t)fp, F_SETLK, &lf, type);
have_flock = (error == 0);
vn_lock(vp, lock_flags | LK_RETRY);
if (error == 0 && vp->v_iflag & VI_DOOMED)
error = ENOENT;
/*
* Another thread might have used this vnode as an
* executable while the vnode lock was dropped.
* Ensure the vnode is still able to be opened for
* writing after the lock has been obtained.
*/
if (error == 0 && accmode & VWRITE)
error = vn_writechk(vp);
if (error) {
VOP_UNLOCK(vp, 0);
if (have_flock) {
lf.l_whence = SEEK_SET;
lf.l_start = 0;
lf.l_len = 0;
lf.l_type = F_UNLCK;
(void) VOP_ADVLOCK(vp, fp, F_UNLCK, &lf,
F_FLOCK);
}
vn_start_write(vp, &mp, V_WAIT);
vn_lock(vp, lock_flags | LK_RETRY);
(void)VOP_CLOSE(vp, fmode, cred, td);
vn_finished_write(mp);
return (error);
}
fp->f_flag |= FHASLOCK;
}
if (fmode & FWRITE) {
VOP_ADD_WRITECOUNT(vp, 1);
CTR3(KTR_VFS, "%s: vp %p v_writecount increased to %d",
__func__, vp, vp->v_writecount);
}
ASSERT_VOP_LOCKED(vp, "vn_open_vnode");
1994-05-24 10:09:53 +00:00
return (0);
}
/*
* Check for write permissions on the specified vnode.
* Prototype text segments cannot be written.
1994-05-24 10:09:53 +00:00
*/
int
1994-05-24 10:09:53 +00:00
vn_writechk(vp)
register struct vnode *vp;
{
ASSERT_VOP_LOCKED(vp, "vn_writechk");
1994-05-24 10:09:53 +00:00
/*
* If there's shared text associated with
* the vnode, try to free it up once. If
* we fail, we can't allow writing.
*/
if (VOP_IS_TEXT(vp))
1994-05-24 10:09:53 +00:00
return (ETXTBSY);
1994-05-24 10:09:53 +00:00
return (0);
}
/*
* Vnode close call
*/
int
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
vn_close(vp, flags, file_cred, td)
1994-05-24 10:09:53 +00:00
register struct vnode *vp;
int flags;
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
struct ucred *file_cred;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct mount *mp;
int error, lock_flags;
if (!(flags & FWRITE) && vp->v_mount != NULL &&
vp->v_mount->mnt_kern_flag & MNTK_EXTENDED_SHARED)
lock_flags = LK_SHARED;
else
lock_flags = LK_EXCLUSIVE;
1994-05-24 10:09:53 +00:00
vn_start_write(vp, &mp, V_WAIT);
vn_lock(vp, lock_flags | LK_RETRY);
if (flags & FWRITE) {
VNASSERT(vp->v_writecount > 0, vp,
("vn_close: negative writecount"));
VOP_ADD_WRITECOUNT(vp, -1);
CTR3(KTR_VFS, "%s: vp %p v_writecount decreased to %d",
__func__, vp, vp->v_writecount);
}
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
error = VOP_CLOSE(vp, flags, file_cred, td);
vput(vp);
vn_finished_write(mp);
1994-05-24 10:09:53 +00:00
return (error);
}
/*
* Heuristic to detect sequential operation.
*/
static int
sequential_heuristic(struct uio *uio, struct file *fp)
{
if (atomic_load_acq_int(&(fp->f_flag)) & FRDAHEAD)
return (fp->f_seqcount << IO_SEQSHIFT);
/*
* Offset 0 is handled specially. open() sets f_seqcount to 1 so
* that the first I/O is normally considered to be slightly
* sequential. Seeking to offset 0 doesn't change sequentiality
* unless previous seeks have reduced f_seqcount to 0, in which
* case offset 0 is not special.
*/
if ((uio->uio_offset == 0 && fp->f_seqcount > 0) ||
uio->uio_offset == fp->f_nextoff) {
/*
* f_seqcount is in units of fixed-size blocks so that it
* depends mainly on the amount of sequential I/O and not
* much on the number of sequential I/O's. The fixed size
* of 16384 is hard-coded here since it is (not quite) just
* a magic size that works well here. This size is more
* closely related to the best I/O size for real disks than
* to any block size used by software.
*/
fp->f_seqcount += howmany(uio->uio_resid, 16384);
if (fp->f_seqcount > IO_SEQMAX)
fp->f_seqcount = IO_SEQMAX;
return (fp->f_seqcount << IO_SEQSHIFT);
}
/* Not sequential. Quickly draw-down sequentiality. */
if (fp->f_seqcount > 1)
fp->f_seqcount = 1;
else
fp->f_seqcount = 0;
return (0);
}
1994-05-24 10:09:53 +00:00
/*
* Package up an I/O request on a vnode into a uio and do it.
*/
int
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
vn_rdwr(enum uio_rw rw, struct vnode *vp, void *base, int len, off_t offset,
enum uio_seg segflg, int ioflg, struct ucred *active_cred,
struct ucred *file_cred, ssize_t *aresid, struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct uio auio;
struct iovec aiov;
struct mount *mp;
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
struct ucred *cred;
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
void *rl_cookie;
int error, lock_flags;
1994-05-24 10:09:53 +00:00
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
auio.uio_iov = &aiov;
auio.uio_iovcnt = 1;
aiov.iov_base = base;
aiov.iov_len = len;
auio.uio_resid = len;
auio.uio_offset = offset;
auio.uio_segflg = segflg;
auio.uio_rw = rw;
auio.uio_td = td;
error = 0;
if ((ioflg & IO_NODELOCKED) == 0) {
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
if (rw == UIO_READ) {
rl_cookie = vn_rangelock_rlock(vp, offset,
offset + len);
} else {
rl_cookie = vn_rangelock_wlock(vp, offset,
offset + len);
}
mp = NULL;
if (rw == UIO_WRITE) {
if (vp->v_type != VCHR &&
(error = vn_start_write(vp, &mp, V_WAIT | PCATCH))
!= 0)
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
goto out;
if (MNT_SHARED_WRITES(mp) ||
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
((mp == NULL) && MNT_SHARED_WRITES(vp->v_mount)))
lock_flags = LK_SHARED;
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
else
lock_flags = LK_EXCLUSIVE;
} else
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
lock_flags = LK_SHARED;
vn_lock(vp, lock_flags | LK_RETRY);
} else
rl_cookie = NULL;
ASSERT_VOP_LOCKED(vp, "IO_NODELOCKED with no vp lock held");
#ifdef MAC
if ((ioflg & IO_NOMACCHECK) == 0) {
if (rw == UIO_READ)
error = mac_vnode_check_read(active_cred, file_cred,
vp);
else
error = mac_vnode_check_write(active_cred, file_cred,
vp);
}
#endif
if (error == 0) {
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
if (file_cred != NULL)
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
cred = file_cred;
else
cred = active_cred;
if (rw == UIO_READ)
error = VOP_READ(vp, &auio, ioflg, cred);
else
error = VOP_WRITE(vp, &auio, ioflg, cred);
}
1994-05-24 10:09:53 +00:00
if (aresid)
*aresid = auio.uio_resid;
else
if (auio.uio_resid && error == 0)
error = EIO;
if ((ioflg & IO_NODELOCKED) == 0) {
VOP_UNLOCK(vp, 0);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
if (mp != NULL)
vn_finished_write(mp);
}
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
out:
if (rl_cookie != NULL)
vn_rangelock_unlock(vp, rl_cookie);
1994-05-24 10:09:53 +00:00
return (error);
}
/*
* Package up an I/O request on a vnode into a uio and do it. The I/O
* request is split up into smaller chunks and we try to avoid saturating
* the buffer cache while potentially holding a vnode locked, so we
* check bwillwrite() before calling vn_rdwr(). We also call kern_yield()
* to give other processes a chance to lock the vnode (either other processes
* core'ing the same binary, or unrelated processes scanning the directory).
*/
int
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
vn_rdwr_inchunks(rw, vp, base, len, offset, segflg, ioflg, active_cred,
file_cred, aresid, td)
enum uio_rw rw;
struct vnode *vp;
2005-12-14 00:49:52 +00:00
void *base;
size_t len;
off_t offset;
enum uio_seg segflg;
int ioflg;
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
struct ucred *active_cred;
struct ucred *file_cred;
size_t *aresid;
struct thread *td;
{
int error = 0;
ssize_t iaresid;
do {
int chunk;
/*
* Force `offset' to a multiple of MAXBSIZE except possibly
* for the first chunk, so that filesystems only need to
* write full blocks except possibly for the first and last
* chunks.
*/
chunk = MAXBSIZE - (uoff_t)offset % MAXBSIZE;
if (chunk > len)
chunk = len;
if (rw != UIO_READ && vp->v_type == VREG)
bwillwrite();
iaresid = 0;
error = vn_rdwr(rw, vp, base, chunk, offset, segflg,
ioflg, active_cred, file_cred, &iaresid, td);
len -= chunk; /* aresid calc already includes length */
if (error)
break;
offset += chunk;
2005-12-14 00:49:52 +00:00
base = (char *)base + chunk;
kern_yield(PRI_USER);
} while (len);
if (aresid)
*aresid = len + iaresid;
return (error);
}
off_t
foffset_lock(struct file *fp, int flags)
{
struct mtx *mtxp;
off_t res;
KASSERT((flags & FOF_OFFSET) == 0, ("FOF_OFFSET passed"));
#if OFF_MAX <= LONG_MAX
/*
* Caller only wants the current f_offset value. Assume that
* the long and shorter integer types reads are atomic.
*/
if ((flags & FOF_NOLOCK) != 0)
return (fp->f_offset);
#endif
/*
* According to McKusick the vn lock was protecting f_offset here.
* It is now protected by the FOFFSET_LOCKED flag.
*/
mtxp = mtx_pool_find(mtxpool_sleep, fp);
mtx_lock(mtxp);
if ((flags & FOF_NOLOCK) == 0) {
while (fp->f_vnread_flags & FOFFSET_LOCKED) {
fp->f_vnread_flags |= FOFFSET_LOCK_WAITING;
msleep(&fp->f_vnread_flags, mtxp, PUSER -1,
"vofflock", 0);
}
fp->f_vnread_flags |= FOFFSET_LOCKED;
}
res = fp->f_offset;
mtx_unlock(mtxp);
return (res);
}
void
foffset_unlock(struct file *fp, off_t val, int flags)
{
struct mtx *mtxp;
KASSERT((flags & FOF_OFFSET) == 0, ("FOF_OFFSET passed"));
#if OFF_MAX <= LONG_MAX
if ((flags & FOF_NOLOCK) != 0) {
if ((flags & FOF_NOUPDATE) == 0)
fp->f_offset = val;
if ((flags & FOF_NEXTOFF) != 0)
fp->f_nextoff = val;
return;
}
#endif
mtxp = mtx_pool_find(mtxpool_sleep, fp);
mtx_lock(mtxp);
if ((flags & FOF_NOUPDATE) == 0)
fp->f_offset = val;
if ((flags & FOF_NEXTOFF) != 0)
fp->f_nextoff = val;
if ((flags & FOF_NOLOCK) == 0) {
KASSERT((fp->f_vnread_flags & FOFFSET_LOCKED) != 0,
("Lost FOFFSET_LOCKED"));
if (fp->f_vnread_flags & FOFFSET_LOCK_WAITING)
wakeup(&fp->f_vnread_flags);
fp->f_vnread_flags = 0;
}
mtx_unlock(mtxp);
}
void
foffset_lock_uio(struct file *fp, struct uio *uio, int flags)
{
if ((flags & FOF_OFFSET) == 0)
uio->uio_offset = foffset_lock(fp, flags);
}
void
foffset_unlock_uio(struct file *fp, struct uio *uio, int flags)
{
if ((flags & FOF_OFFSET) == 0)
foffset_unlock(fp, uio->uio_offset, flags);
}
static int
get_advice(struct file *fp, struct uio *uio)
{
struct mtx *mtxp;
int ret;
ret = POSIX_FADV_NORMAL;
if (fp->f_advice == NULL)
return (ret);
mtxp = mtx_pool_find(mtxpool_sleep, fp);
mtx_lock(mtxp);
if (uio->uio_offset >= fp->f_advice->fa_start &&
uio->uio_offset + uio->uio_resid <= fp->f_advice->fa_end)
ret = fp->f_advice->fa_advice;
mtx_unlock(mtxp);
return (ret);
}
1994-05-24 10:09:53 +00:00
/*
* File table vnode read routine.
*/
static int
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
vn_read(fp, uio, active_cred, flags, td)
1994-05-24 10:09:53 +00:00
struct file *fp;
struct uio *uio;
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
struct ucred *active_cred;
int flags;
2010-06-26 21:44:45 +00:00
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct vnode *vp;
struct mtx *mtxp;
int error, ioflag;
int advice;
off_t offset, start, end;
1994-05-24 10:09:53 +00:00
KASSERT(uio->uio_td == td, ("uio_td %p is not td %p",
uio->uio_td, td));
KASSERT(flags & FOF_OFFSET, ("No FOF_OFFSET"));
vp = fp->f_vnode;
ioflag = 0;
if (fp->f_flag & FNONBLOCK)
ioflag |= IO_NDELAY;
if (fp->f_flag & O_DIRECT)
ioflag |= IO_DIRECT;
advice = get_advice(fp, uio);
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
vn_lock(vp, LK_SHARED | LK_RETRY);
switch (advice) {
case POSIX_FADV_NORMAL:
case POSIX_FADV_SEQUENTIAL:
case POSIX_FADV_NOREUSE:
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
ioflag |= sequential_heuristic(uio, fp);
break;
case POSIX_FADV_RANDOM:
/* Disable read-ahead for random I/O. */
break;
}
offset = uio->uio_offset;
#ifdef MAC
error = mac_vnode_check_read(active_cred, fp->f_cred, vp);
if (error == 0)
#endif
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
error = VOP_READ(vp, uio, ioflag, fp->f_cred);
fp->f_nextoff = uio->uio_offset;
VOP_UNLOCK(vp, 0);
if (error == 0 && advice == POSIX_FADV_NOREUSE &&
offset != uio->uio_offset) {
/*
* Use POSIX_FADV_DONTNEED to flush clean pages and
* buffers for the backing file after a
* POSIX_FADV_NOREUSE read(2). To optimize the common
* case of using POSIX_FADV_NOREUSE with sequential
* access, track the previous implicit DONTNEED
* request and grow this request to include the
* current read(2) in addition to the previous
* DONTNEED. With purely sequential access this will
* cause the DONTNEED requests to continously grow to
* cover all of the previously read regions of the
* file. This allows filesystem blocks that are
* accessed by multiple calls to read(2) to be flushed
* once the last read(2) finishes.
*/
start = offset;
end = uio->uio_offset - 1;
mtxp = mtx_pool_find(mtxpool_sleep, fp);
mtx_lock(mtxp);
if (fp->f_advice != NULL &&
fp->f_advice->fa_advice == POSIX_FADV_NOREUSE) {
if (start != 0 && fp->f_advice->fa_prevend + 1 == start)
start = fp->f_advice->fa_prevstart;
else if (fp->f_advice->fa_prevstart != 0 &&
fp->f_advice->fa_prevstart == end + 1)
end = fp->f_advice->fa_prevend;
fp->f_advice->fa_prevstart = start;
fp->f_advice->fa_prevend = end;
}
mtx_unlock(mtxp);
error = VOP_ADVISE(vp, start, end, POSIX_FADV_DONTNEED);
}
1994-05-24 10:09:53 +00:00
return (error);
}
/*
* File table vnode write routine.
*/
static int
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
vn_write(fp, uio, active_cred, flags, td)
1994-05-24 10:09:53 +00:00
struct file *fp;
struct uio *uio;
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
struct ucred *active_cred;
int flags;
2010-06-26 21:44:45 +00:00
struct thread *td;
1994-05-24 10:09:53 +00:00
{
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
struct vnode *vp;
struct mount *mp;
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
struct mtx *mtxp;
int error, ioflag, lock_flags;
int advice;
off_t offset, start, end;
1994-05-24 10:09:53 +00:00
KASSERT(uio->uio_td == td, ("uio_td %p is not td %p",
uio->uio_td, td));
KASSERT(flags & FOF_OFFSET, ("No FOF_OFFSET"));
vp = fp->f_vnode;
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
if (vp->v_type == VREG)
bwillwrite();
ioflag = IO_UNIT;
if (vp->v_type == VREG && (fp->f_flag & O_APPEND))
1994-05-24 10:09:53 +00:00
ioflag |= IO_APPEND;
if (fp->f_flag & FNONBLOCK)
ioflag |= IO_NDELAY;
if (fp->f_flag & O_DIRECT)
ioflag |= IO_DIRECT;
if ((fp->f_flag & O_FSYNC) ||
(vp->v_mount && (vp->v_mount->mnt_flag & MNT_SYNCHRONOUS)))
ioflag |= IO_SYNC;
mp = NULL;
if (vp->v_type != VCHR &&
(error = vn_start_write(vp, &mp, V_WAIT | PCATCH)) != 0)
goto unlock;
advice = get_advice(fp, uio);
if (MNT_SHARED_WRITES(mp) ||
(mp == NULL && MNT_SHARED_WRITES(vp->v_mount))) {
lock_flags = LK_SHARED;
} else {
lock_flags = LK_EXCLUSIVE;
}
vn_lock(vp, lock_flags | LK_RETRY);
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
switch (advice) {
case POSIX_FADV_NORMAL:
case POSIX_FADV_SEQUENTIAL:
case POSIX_FADV_NOREUSE:
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
ioflag |= sequential_heuristic(uio, fp);
break;
case POSIX_FADV_RANDOM:
/* XXX: Is this correct? */
break;
}
offset = uio->uio_offset;
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
#ifdef MAC
error = mac_vnode_check_write(active_cred, fp->f_cred, vp);
if (error == 0)
#endif
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
error = VOP_WRITE(vp, uio, ioflag, fp->f_cred);
fp->f_nextoff = uio->uio_offset;
VOP_UNLOCK(vp, 0);
if (vp->v_type != VCHR)
vn_finished_write(mp);
if (error == 0 && advice == POSIX_FADV_NOREUSE &&
offset != uio->uio_offset) {
/*
* Use POSIX_FADV_DONTNEED to flush clean pages and
* buffers for the backing file after a
* POSIX_FADV_NOREUSE write(2). To optimize the
* common case of using POSIX_FADV_NOREUSE with
* sequential access, track the previous implicit
* DONTNEED request and grow this request to include
* the current write(2) in addition to the previous
* DONTNEED. With purely sequential access this will
* cause the DONTNEED requests to continously grow to
* cover all of the previously written regions of the
* file.
*
* Note that the blocks just written are almost
* certainly still dirty, so this only works when
* VOP_ADVISE() calls from subsequent writes push out
* the data written by this write(2) once the backing
* buffers are clean. However, as compared to forcing
* IO_DIRECT, this gives much saner behavior. Write
* clustering is still allowed, and clean pages are
* merely moved to the cache page queue rather than
* outright thrown away. This means a subsequent
* read(2) can still avoid hitting the disk if the
* pages have not been reclaimed.
*
* This does make POSIX_FADV_NOREUSE largely useless
* with non-sequential access. However, sequential
* access is the more common use case and the flag is
* merely advisory.
*/
start = offset;
end = uio->uio_offset - 1;
mtxp = mtx_pool_find(mtxpool_sleep, fp);
mtx_lock(mtxp);
if (fp->f_advice != NULL &&
fp->f_advice->fa_advice == POSIX_FADV_NOREUSE) {
if (start != 0 && fp->f_advice->fa_prevend + 1 == start)
start = fp->f_advice->fa_prevstart;
else if (fp->f_advice->fa_prevstart != 0 &&
fp->f_advice->fa_prevstart == end + 1)
end = fp->f_advice->fa_prevend;
fp->f_advice->fa_prevstart = start;
fp->f_advice->fa_prevend = end;
}
mtx_unlock(mtxp);
error = VOP_ADVISE(vp, start, end, POSIX_FADV_DONTNEED);
}
unlock:
1994-05-24 10:09:53 +00:00
return (error);
}
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
static const int io_hold_cnt = 16;
static int vn_io_fault_enable = 1;
SYSCTL_INT(_debug, OID_AUTO, vn_io_fault_enable, CTLFLAG_RW,
&vn_io_fault_enable, 0, "Enable vn_io_fault lock avoidance");
static u_long vn_io_faults_cnt;
SYSCTL_ULONG(_debug, OID_AUTO, vn_io_faults, CTLFLAG_RD,
&vn_io_faults_cnt, 0, "Count of vn_io_fault lock avoidance triggers");
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
/*
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
* The vn_io_fault() is a wrapper around vn_read() and vn_write() to
* prevent the following deadlock:
*
* Assume that the thread A reads from the vnode vp1 into userspace
* buffer buf1 backed by the pages of vnode vp2. If a page in buf1 is
* currently not resident, then system ends up with the call chain
* vn_read() -> VOP_READ(vp1) -> uiomove() -> [Page Fault] ->
* vm_fault(buf1) -> vnode_pager_getpages(vp2) -> VOP_GETPAGES(vp2)
* which establishes lock order vp1->vn_lock, then vp2->vn_lock.
* If, at the same time, thread B reads from vnode vp2 into buffer buf2
* backed by the pages of vnode vp1, and some page in buf2 is not
* resident, we get a reversed order vp2->vn_lock, then vp1->vn_lock.
*
* To prevent the lock order reversal and deadlock, vn_io_fault() does
* not allow page faults to happen during VOP_READ() or VOP_WRITE().
* Instead, it first tries to do the whole range i/o with pagefaults
* disabled. If all pages in the i/o buffer are resident and mapped,
* VOP will succeed (ignoring the genuine filesystem errors).
* Otherwise, we get back EFAULT, and vn_io_fault() falls back to do
* i/o in chunks, with all pages in the chunk prefaulted and held
* using vm_fault_quick_hold_pages().
*
* Filesystems using this deadlock avoidance scheme should use the
* array of the held pages from uio, saved in the curthread->td_ma,
* instead of doing uiomove(). A helper function
* vn_io_fault_uiomove() converts uiomove request into
* uiomove_fromphys() over td_ma array.
*
* Since vnode locks do not cover the whole i/o anymore, rangelocks
* make the current i/o request atomic with respect to other i/os and
* truncations.
*/
static int
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
vn_io_fault(struct file *fp, struct uio *uio, struct ucred *active_cred,
int flags, struct thread *td)
{
vm_page_t ma[io_hold_cnt + 2];
struct uio *uio_clone, short_uio;
struct iovec short_iovec[1];
fo_rdwr_t *doio;
struct vnode *vp;
void *rl_cookie;
struct mount *mp;
vm_page_t *prev_td_ma;
int cnt, error, save, saveheld, prev_td_ma_cnt;
vm_offset_t addr, end;
vm_prot_t prot;
size_t len, resid;
ssize_t adv;
if (uio->uio_rw == UIO_READ)
doio = vn_read;
else
doio = vn_write;
vp = fp->f_vnode;
foffset_lock_uio(fp, uio, flags);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
if (uio->uio_segflg != UIO_USERSPACE || vp->v_type != VREG ||
((mp = vp->v_mount) != NULL &&
(mp->mnt_kern_flag & MNTK_NO_IOPF) == 0) ||
!vn_io_fault_enable) {
error = doio(fp, uio, active_cred, flags | FOF_OFFSET, td);
goto out_last;
}
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
/*
* The UFS follows IO_UNIT directive and replays back both
* uio_offset and uio_resid if an error is encountered during the
* operation. But, since the iovec may be already advanced,
* uio is still in an inconsistent state.
*
* Cache a copy of the original uio, which is advanced to the redo
* point using UIO_NOCOPY below.
*/
uio_clone = cloneuio(uio);
resid = uio->uio_resid;
short_uio.uio_segflg = UIO_USERSPACE;
short_uio.uio_rw = uio->uio_rw;
short_uio.uio_td = uio->uio_td;
if (uio->uio_rw == UIO_READ) {
prot = VM_PROT_WRITE;
rl_cookie = vn_rangelock_rlock(vp, uio->uio_offset,
uio->uio_offset + uio->uio_resid);
} else {
prot = VM_PROT_READ;
if ((fp->f_flag & O_APPEND) != 0 || (flags & FOF_OFFSET) == 0)
/* For appenders, punt and lock the whole range. */
rl_cookie = vn_rangelock_wlock(vp, 0, OFF_MAX);
else
rl_cookie = vn_rangelock_wlock(vp, uio->uio_offset,
uio->uio_offset + uio->uio_resid);
}
save = vm_fault_disable_pagefaults();
error = doio(fp, uio, active_cred, flags | FOF_OFFSET, td);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
if (error != EFAULT)
goto out;
atomic_add_long(&vn_io_faults_cnt, 1);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
uio_clone->uio_segflg = UIO_NOCOPY;
uiomove(NULL, resid - uio->uio_resid, uio_clone);
uio_clone->uio_segflg = uio->uio_segflg;
saveheld = curthread_pflags_set(TDP_UIOHELD);
prev_td_ma = td->td_ma;
prev_td_ma_cnt = td->td_ma_cnt;
while (uio_clone->uio_resid != 0) {
len = uio_clone->uio_iov->iov_len;
if (len == 0) {
KASSERT(uio_clone->uio_iovcnt >= 1,
("iovcnt underflow"));
uio_clone->uio_iov++;
uio_clone->uio_iovcnt--;
continue;
}
addr = (vm_offset_t)uio_clone->uio_iov->iov_base;
end = round_page(addr + len);
cnt = howmany(end - trunc_page(addr), PAGE_SIZE);
/*
* A perfectly misaligned address and length could cause
* both the start and the end of the chunk to use partial
* page. +2 accounts for such a situation.
*/
if (cnt > io_hold_cnt + 2) {
len = io_hold_cnt * PAGE_SIZE;
KASSERT(howmany(round_page(addr + len) -
trunc_page(addr), PAGE_SIZE) <= io_hold_cnt + 2,
("cnt overflow"));
}
cnt = vm_fault_quick_hold_pages(&td->td_proc->p_vmspace->vm_map,
addr, len, prot, ma, io_hold_cnt + 2);
if (cnt == -1) {
error = EFAULT;
break;
}
short_uio.uio_iov = &short_iovec[0];
short_iovec[0].iov_base = (void *)addr;
short_uio.uio_iovcnt = 1;
short_uio.uio_resid = short_iovec[0].iov_len = len;
short_uio.uio_offset = uio_clone->uio_offset;
td->td_ma = ma;
td->td_ma_cnt = cnt;
error = doio(fp, &short_uio, active_cred, flags | FOF_OFFSET,
td);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
vm_page_unhold_pages(ma, cnt);
adv = len - short_uio.uio_resid;
uio_clone->uio_iov->iov_base =
(char *)uio_clone->uio_iov->iov_base + adv;
uio_clone->uio_iov->iov_len -= adv;
uio_clone->uio_resid -= adv;
uio_clone->uio_offset += adv;
uio->uio_resid -= adv;
uio->uio_offset += adv;
if (error != 0 || adv == 0)
break;
}
td->td_ma = prev_td_ma;
td->td_ma_cnt = prev_td_ma_cnt;
curthread_pflags_restore(saveheld);
out:
vm_fault_enable_pagefaults(save);
vn_rangelock_unlock(vp, rl_cookie);
free(uio_clone, M_IOV);
out_last:
foffset_unlock_uio(fp, uio, flags);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
return (error);
}
/*
* Helper function to perform the requested uiomove operation using
* the held pages for io->uio_iov[0].iov_base buffer instead of
* copyin/copyout. Access to the pages with uiomove_fromphys()
* instead of iov_base prevents page faults that could occur due to
* pmap_collect() invalidating the mapping created by
* vm_fault_quick_hold_pages(), or pageout daemon, page laundry or
* object cleanup revoking the write access from page mappings.
*
* Filesystems specified MNTK_NO_IOPF shall use vn_io_fault_uiomove()
* instead of plain uiomove().
*/
int
vn_io_fault_uiomove(char *data, int xfersize, struct uio *uio)
{
struct uio transp_uio;
struct iovec transp_iov[1];
struct thread *td;
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
size_t adv;
int error, pgadv;
td = curthread;
if ((td->td_pflags & TDP_UIOHELD) == 0 ||
uio->uio_segflg != UIO_USERSPACE)
return (uiomove(data, xfersize, uio));
KASSERT(uio->uio_iovcnt == 1, ("uio_iovcnt %d", uio->uio_iovcnt));
transp_iov[0].iov_base = data;
transp_uio.uio_iov = &transp_iov[0];
transp_uio.uio_iovcnt = 1;
if (xfersize > uio->uio_resid)
xfersize = uio->uio_resid;
transp_uio.uio_resid = transp_iov[0].iov_len = xfersize;
transp_uio.uio_offset = 0;
transp_uio.uio_segflg = UIO_SYSSPACE;
/*
* Since transp_iov points to data, and td_ma page array
* corresponds to original uio->uio_iov, we need to invert the
* direction of the i/o operation as passed to
* uiomove_fromphys().
*/
switch (uio->uio_rw) {
case UIO_WRITE:
transp_uio.uio_rw = UIO_READ;
break;
case UIO_READ:
transp_uio.uio_rw = UIO_WRITE;
break;
}
transp_uio.uio_td = uio->uio_td;
error = uiomove_fromphys(td->td_ma,
((vm_offset_t)uio->uio_iov->iov_base) & PAGE_MASK,
xfersize, &transp_uio);
adv = xfersize - transp_uio.uio_resid;
pgadv =
(((vm_offset_t)uio->uio_iov->iov_base + adv) >> PAGE_SHIFT) -
(((vm_offset_t)uio->uio_iov->iov_base) >> PAGE_SHIFT);
td->td_ma += pgadv;
KASSERT(td->td_ma_cnt >= pgadv, ("consumed pages %d %d", td->td_ma_cnt,
pgadv));
td->td_ma_cnt -= pgadv;
uio->uio_iov->iov_base = (char *)uio->uio_iov->iov_base + adv;
uio->uio_iov->iov_len -= adv;
uio->uio_resid -= adv;
uio->uio_offset += adv;
return (error);
}
int
vn_io_fault_pgmove(vm_page_t ma[], vm_offset_t offset, int xfersize,
struct uio *uio)
{
struct thread *td;
vm_offset_t iov_base;
int cnt, pgadv;
td = curthread;
if ((td->td_pflags & TDP_UIOHELD) == 0 ||
uio->uio_segflg != UIO_USERSPACE)
return (uiomove_fromphys(ma, offset, xfersize, uio));
KASSERT(uio->uio_iovcnt == 1, ("uio_iovcnt %d", uio->uio_iovcnt));
cnt = xfersize > uio->uio_resid ? uio->uio_resid : xfersize;
iov_base = (vm_offset_t)uio->uio_iov->iov_base;
switch (uio->uio_rw) {
case UIO_WRITE:
pmap_copy_pages(td->td_ma, iov_base & PAGE_MASK, ma,
offset, cnt);
break;
case UIO_READ:
pmap_copy_pages(ma, offset, td->td_ma, iov_base & PAGE_MASK,
cnt);
break;
}
pgadv = ((iov_base + cnt) >> PAGE_SHIFT) - (iov_base >> PAGE_SHIFT);
td->td_ma += pgadv;
KASSERT(td->td_ma_cnt >= pgadv, ("consumed pages %d %d", td->td_ma_cnt,
pgadv));
td->td_ma_cnt -= pgadv;
uio->uio_iov->iov_base = (char *)(iov_base + cnt);
uio->uio_iov->iov_len -= cnt;
uio->uio_resid -= cnt;
uio->uio_offset += cnt;
return (0);
}
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
/*
* File table truncate routine.
*/
static int
vn_truncate(struct file *fp, off_t length, struct ucred *active_cred,
struct thread *td)
{
struct vattr vattr;
struct mount *mp;
struct vnode *vp;
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
void *rl_cookie;
int error;
vp = fp->f_vnode;
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
/*
* Lock the whole range for truncation. Otherwise split i/o
* might happen partly before and partly after the truncation.
*/
rl_cookie = vn_rangelock_wlock(vp, 0, OFF_MAX);
error = vn_start_write(vp, &mp, V_WAIT | PCATCH);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
if (error)
goto out1;
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
if (vp->v_type == VDIR) {
error = EISDIR;
goto out;
}
#ifdef MAC
error = mac_vnode_check_write(active_cred, fp->f_cred, vp);
if (error)
goto out;
#endif
error = vn_writechk(vp);
if (error == 0) {
VATTR_NULL(&vattr);
vattr.va_size = length;
error = VOP_SETATTR(vp, &vattr, fp->f_cred);
}
out:
VOP_UNLOCK(vp, 0);
vn_finished_write(mp);
vn_io_fault() is a facility to prevent page faults while filesystems perform copyin/copyout of the file data into the usermode buffer. Typical filesystem hold vnode lock and some buffer locks over the VOP_READ() and VOP_WRITE() operations, and since page fault handler may need to recurse into VFS to get the page content, a deadlock is possible. The facility works by disabling page faults handling for the current thread and attempting to execute i/o while allowing uiomove() to access the usermode mapping of the i/o buffer. If all buffer pages are resident, uiomove() is successfull and request is finished. If EFAULT is returned from uiomove(), the pages backing i/o buffer are faulted in and held, and the copyin/out is performed using uiomove_fromphys() over the held pages for the second attempt of VOP call. Since pages are hold in chunks to prevent large i/o requests from starving free pages pool, and since vnode lock is only taken for i/o over the current chunk, the vnode lock no longer protect atomicity of the whole i/o request. Use newly added rangelocks to provide the required atomicity of i/o regardind other i/o and truncations. Filesystems need to explicitely opt-in into the scheme, by setting the MNTK_NO_IOPF struct mount flag, and optionally by using vn_io_fault_uiomove(9) helper which takes care of calling uiomove() or converting uio into request for uiomove_fromphys(). Reviewed by: bf (comments), mdf, pjd (previous version) Tested by: pho Tested by: flo, Gustau P?rez <gperez entel upc edu> (previous version) MFC after: 2 months
2012-05-30 16:42:08 +00:00
out1:
vn_rangelock_unlock(vp, rl_cookie);
return (error);
}
1994-05-24 10:09:53 +00:00
/*
* File table vnode stat routine.
*/
1999-11-08 03:32:15 +00:00
static int
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
vn_statfile(fp, sb, active_cred, td)
1999-11-08 03:32:15 +00:00
struct file *fp;
struct stat *sb;
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
struct ucred *active_cred;
struct thread *td;
1999-11-08 03:32:15 +00:00
{
struct vnode *vp = fp->f_vnode;
int error;
1999-11-08 03:32:15 +00:00
vn_lock(vp, LK_SHARED | LK_RETRY);
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
error = vn_stat(vp, sb, active_cred, fp->f_cred, td);
VOP_UNLOCK(vp, 0);
return (error);
1999-11-08 03:32:15 +00:00
}
/*
* Stat a vnode; implementation for the stat syscall
*/
int
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
vn_stat(vp, sb, active_cred, file_cred, td)
1994-05-24 10:09:53 +00:00
struct vnode *vp;
register struct stat *sb;
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
struct ucred *active_cred;
struct ucred *file_cred;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct vattr vattr;
register struct vattr *vap;
int error;
u_short mode;
#ifdef MAC
error = mac_vnode_check_stat(active_cred, file_cred, vp);
if (error)
return (error);
#endif
1994-05-24 10:09:53 +00:00
vap = &vattr;
/*
* Initialize defaults for new and unusual fields, so that file
* systems which don't support these fields don't need to know
* about them.
*/
vap->va_birthtime.tv_sec = -1;
vap->va_birthtime.tv_nsec = 0;
vap->va_fsid = VNOVAL;
vap->va_rdev = NODEV;
error = VOP_GETATTR(vp, vap, active_cred);
1994-05-24 10:09:53 +00:00
if (error)
return (error);
/*
* Zero the spare stat fields
*/
bzero(sb, sizeof *sb);
1994-05-24 10:09:53 +00:00
/*
* Copy from vattr table
*/
if (vap->va_fsid != VNOVAL)
sb->st_dev = vap->va_fsid;
else
sb->st_dev = vp->v_mount->mnt_stat.f_fsid.val[0];
1994-05-24 10:09:53 +00:00
sb->st_ino = vap->va_fileid;
mode = vap->va_mode;
switch (vap->va_type) {
1994-05-24 10:09:53 +00:00
case VREG:
mode |= S_IFREG;
break;
case VDIR:
mode |= S_IFDIR;
break;
case VBLK:
mode |= S_IFBLK;
break;
case VCHR:
mode |= S_IFCHR;
break;
case VLNK:
mode |= S_IFLNK;
break;
case VSOCK:
mode |= S_IFSOCK;
break;
case VFIFO:
mode |= S_IFIFO;
break;
default:
return (EBADF);
};
sb->st_mode = mode;
sb->st_nlink = vap->va_nlink;
sb->st_uid = vap->va_uid;
sb->st_gid = vap->va_gid;
sb->st_rdev = vap->va_rdev;
if (vap->va_size > OFF_MAX)
return (EOVERFLOW);
1994-05-24 10:09:53 +00:00
sb->st_size = vap->va_size;
sb->st_atim = vap->va_atime;
sb->st_mtim = vap->va_mtime;
sb->st_ctim = vap->va_ctime;
sb->st_birthtim = vap->va_birthtime;
/*
* According to www.opengroup.org, the meaning of st_blksize is
* "a filesystem-specific preferred I/O block size for this
* object. In some filesystem types, this may vary from file
* to file"
* Use miminum/default of PAGE_SIZE (e.g. for VCHR).
*/
sb->st_blksize = max(PAGE_SIZE, vap->va_blocksize);
1994-05-24 10:09:53 +00:00
sb->st_flags = vap->va_flags;
if (priv_check(td, PRIV_VFS_GENERATION))
sb->st_gen = 0;
else
sb->st_gen = vap->va_gen;
1994-05-24 10:09:53 +00:00
sb->st_blocks = vap->va_bytes / S_BLKSIZE;
return (0);
}
/*
* File table vnode ioctl routine.
*/
static int
vn_ioctl(fp, com, data, active_cred, td)
1994-05-24 10:09:53 +00:00
struct file *fp;
u_long com;
void *data;
struct ucred *active_cred;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct vnode *vp = fp->f_vnode;
1994-05-24 10:09:53 +00:00
struct vattr vattr;
int error;
error = ENOTTY;
1994-05-24 10:09:53 +00:00
switch (vp->v_type) {
case VREG:
case VDIR:
if (com == FIONREAD) {
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
error = VOP_GETATTR(vp, &vattr, active_cred);
VOP_UNLOCK(vp, 0);
if (!error)
*(int *)data = vattr.va_size - fp->f_offset;
1994-05-24 10:09:53 +00:00
}
if (com == FIONBIO || com == FIOASYNC) /* XXX */
error = 0;
else
error = VOP_IOCTL(vp, com, data, fp->f_flag,
active_cred, td);
break;
1994-05-24 10:09:53 +00:00
default:
break;
1994-05-24 10:09:53 +00:00
}
return (error);
1994-05-24 10:09:53 +00:00
}
/*
1997-09-14 02:51:16 +00:00
* File table vnode poll routine.
1994-05-24 10:09:53 +00:00
*/
static int
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
vn_poll(fp, events, active_cred, td)
1994-05-24 10:09:53 +00:00
struct file *fp;
1997-09-14 02:51:16 +00:00
int events;
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
struct ucred *active_cred;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct vnode *vp;
int error;
vp = fp->f_vnode;
#ifdef MAC
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
error = mac_vnode_check_poll(active_cred, fp->f_cred, vp);
VOP_UNLOCK(vp, 0);
if (!error)
#endif
1994-05-24 10:09:53 +00:00
error = VOP_POLL(vp, events, fp->f_cred, td);
return (error);
1994-05-24 10:09:53 +00:00
}
/*
* Acquire the requested lock and then check for validity. LK_RETRY
* permits vn_lock to return doomed vnodes.
*/
int
_vn_lock(struct vnode *vp, int flags, char *file, int line)
{
int error;
VNASSERT((flags & LK_TYPE_MASK) != 0, vp,
("vn_lock called with no locktype."));
do {
#ifdef DEBUG_VFS_LOCKS
KASSERT(vp->v_holdcnt != 0,
("vn_lock %p: zero hold count", vp));
#endif
error = VOP_LOCK1(vp, flags, file, line);
flags &= ~LK_INTERLOCK; /* Interlock is always dropped. */
KASSERT((flags & LK_RETRY) == 0 || error == 0,
("LK_RETRY set with incompatible flags (0x%x) or an error occured (%d)",
flags, error));
/*
* Callers specify LK_RETRY if they wish to get dead vnodes.
* If RETRY is not set, we return ENOENT instead.
*/
if (error == 0 && vp->v_iflag & VI_DOOMED &&
(flags & LK_RETRY) == 0) {
VOP_UNLOCK(vp, 0);
error = ENOENT;
break;
}
} while (flags & LK_RETRY && error != 0);
return (error);
}
/*
* File table vnode close routine.
*/
static int
vn_closefile(fp, td)
struct file *fp;
struct thread *td;
{
struct vnode *vp;
struct flock lf;
int error;
vp = fp->f_vnode;
fp->f_ops = &badfileops;
if (fp->f_type == DTYPE_VNODE && fp->f_flag & FHASLOCK)
vref(vp);
error = vn_close(vp, fp->f_flag, fp->f_cred, td);
if (fp->f_type == DTYPE_VNODE && fp->f_flag & FHASLOCK) {
lf.l_whence = SEEK_SET;
lf.l_start = 0;
lf.l_len = 0;
lf.l_type = F_UNLCK;
2005-12-14 00:49:52 +00:00
(void) VOP_ADVLOCK(vp, fp, F_UNLCK, &lf, F_FLOCK);
vrele(vp);
}
return (error);
}
/*
* Preparing to start a filesystem write operation. If the operation is
* permitted, then we bump the count of operations in progress and
* proceed. If a suspend request is in progress, we wait until the
* suspension is over, and then proceed.
*/
static int
vn_start_write_locked(struct mount *mp, int flags)
{
int error;
mtx_assert(MNT_MTX(mp), MA_OWNED);
error = 0;
/*
* Check on status of suspension.
*/
if ((curthread->td_pflags & TDP_IGNSUSP) == 0 ||
mp->mnt_susp_owner != curthread) {
while ((mp->mnt_kern_flag & MNTK_SUSPEND) != 0) {
if (flags & V_NOWAIT) {
error = EWOULDBLOCK;
goto unlock;
}
error = msleep(&mp->mnt_flag, MNT_MTX(mp),
(PUSER - 1) | (flags & PCATCH), "suspfs", 0);
if (error)
goto unlock;
}
}
if (flags & V_XSLEEP)
goto unlock;
mp->mnt_writeopcount++;
unlock:
if (error != 0 || (flags & V_XSLEEP) != 0)
MNT_REL(mp);
MNT_IUNLOCK(mp);
return (error);
}
int
vn_start_write(vp, mpp, flags)
struct vnode *vp;
struct mount **mpp;
int flags;
{
struct mount *mp;
int error;
error = 0;
/*
* If a vnode is provided, get and return the mount point that
* to which it will write.
*/
if (vp != NULL) {
if ((error = VOP_GETWRITEMOUNT(vp, mpp)) != 0) {
*mpp = NULL;
if (error != EOPNOTSUPP)
return (error);
return (0);
}
}
if ((mp = *mpp) == NULL)
return (0);
2008-11-02 10:15:42 +00:00
/*
* VOP_GETWRITEMOUNT() returns with the mp refcount held through
* a vfs_ref().
* As long as a vnode is not provided we need to acquire a
* refcount for the provided mountpoint too, in order to
* emulate a vfs_ref().
*/
MNT_ILOCK(mp);
if (vp == NULL)
MNT_REF(mp);
2008-11-02 10:15:42 +00:00
return (vn_start_write_locked(mp, flags));
}
/*
* Secondary suspension. Used by operations such as vop_inactive
* routines that are needed by the higher level functions. These
* are allowed to proceed until all the higher level functions have
* completed (indicated by mnt_writeopcount dropping to zero). At that
* time, these operations are halted until the suspension is over.
*/
int
vn_start_secondary_write(vp, mpp, flags)
struct vnode *vp;
struct mount **mpp;
int flags;
{
struct mount *mp;
int error;
retry:
if (vp != NULL) {
if ((error = VOP_GETWRITEMOUNT(vp, mpp)) != 0) {
*mpp = NULL;
if (error != EOPNOTSUPP)
return (error);
return (0);
}
}
/*
* If we are not suspended or have not yet reached suspended
* mode, then let the operation proceed.
*/
if ((mp = *mpp) == NULL)
return (0);
2008-11-02 10:15:42 +00:00
/*
* VOP_GETWRITEMOUNT() returns with the mp refcount held through
* a vfs_ref().
* As long as a vnode is not provided we need to acquire a
* refcount for the provided mountpoint too, in order to
* emulate a vfs_ref().
*/
MNT_ILOCK(mp);
if (vp == NULL)
MNT_REF(mp);
if ((mp->mnt_kern_flag & (MNTK_SUSPENDED | MNTK_SUSPEND2)) == 0) {
mp->mnt_secondary_writes++;
mp->mnt_secondary_accwrites++;
MNT_IUNLOCK(mp);
return (0);
}
if (flags & V_NOWAIT) {
MNT_REL(mp);
MNT_IUNLOCK(mp);
return (EWOULDBLOCK);
}
/*
* Wait for the suspension to finish.
*/
error = msleep(&mp->mnt_flag, MNT_MTX(mp),
(PUSER - 1) | (flags & PCATCH) | PDROP, "suspfs", 0);
vfs_rel(mp);
if (error == 0)
goto retry;
return (error);
}
/*
* Filesystem write operation has completed. If we are suspending and this
* operation is the last one, notify the suspender that the suspension is
* now in effect.
*/
void
vn_finished_write(mp)
struct mount *mp;
{
if (mp == NULL)
return;
MNT_ILOCK(mp);
MNT_REL(mp);
mp->mnt_writeopcount--;
if (mp->mnt_writeopcount < 0)
panic("vn_finished_write: neg cnt");
if ((mp->mnt_kern_flag & MNTK_SUSPEND) != 0 &&
mp->mnt_writeopcount <= 0)
wakeup(&mp->mnt_writeopcount);
MNT_IUNLOCK(mp);
}
/*
* Filesystem secondary write operation has completed. If we are
* suspending and this operation is the last one, notify the suspender
* that the suspension is now in effect.
*/
void
vn_finished_secondary_write(mp)
struct mount *mp;
{
if (mp == NULL)
return;
MNT_ILOCK(mp);
MNT_REL(mp);
mp->mnt_secondary_writes--;
if (mp->mnt_secondary_writes < 0)
panic("vn_finished_secondary_write: neg cnt");
if ((mp->mnt_kern_flag & MNTK_SUSPEND) != 0 &&
mp->mnt_secondary_writes <= 0)
wakeup(&mp->mnt_secondary_writes);
MNT_IUNLOCK(mp);
}
/*
* Request a filesystem to suspend write operations.
*/
int
vfs_write_suspend(mp)
struct mount *mp;
{
int error;
MNT_ILOCK(mp);
if (mp->mnt_susp_owner == curthread) {
MNT_IUNLOCK(mp);
return (EALREADY);
}
while (mp->mnt_kern_flag & MNTK_SUSPEND)
msleep(&mp->mnt_flag, MNT_MTX(mp), PUSER - 1, "wsuspfs", 0);
mp->mnt_kern_flag |= MNTK_SUSPEND;
mp->mnt_susp_owner = curthread;
if (mp->mnt_writeopcount > 0)
(void) msleep(&mp->mnt_writeopcount,
MNT_MTX(mp), (PUSER - 1)|PDROP, "suspwt", 0);
else
MNT_IUNLOCK(mp);
if ((error = VFS_SYNC(mp, MNT_SUSPEND)) != 0)
vfs_write_resume(mp, 0);
return (error);
}
/*
* Request a filesystem to resume write operations.
*/
void
vfs_write_resume(struct mount *mp, int flags)
{
MNT_ILOCK(mp);
if ((mp->mnt_kern_flag & MNTK_SUSPEND) != 0) {
KASSERT(mp->mnt_susp_owner == curthread, ("mnt_susp_owner"));
mp->mnt_kern_flag &= ~(MNTK_SUSPEND | MNTK_SUSPEND2 |
MNTK_SUSPENDED);
mp->mnt_susp_owner = NULL;
wakeup(&mp->mnt_writeopcount);
wakeup(&mp->mnt_flag);
curthread->td_pflags &= ~TDP_IGNSUSP;
if ((flags & VR_START_WRITE) != 0) {
MNT_REF(mp);
mp->mnt_writeopcount++;
}
MNT_IUNLOCK(mp);
if ((flags & VR_NO_SUSPCLR) == 0)
VFS_SUSP_CLEAN(mp);
} else if ((flags & VR_START_WRITE) != 0) {
MNT_REF(mp);
vn_start_write_locked(mp, 0);
} else {
MNT_IUNLOCK(mp);
}
}
/*
* Implement kqueues for files by translating it to vnode operation.
*/
static int
vn_kqfilter(struct file *fp, struct knote *kn)
{
return (VOP_KQFILTER(fp->f_vnode, kn));
}
/*
* Simplified in-kernel wrapper calls for extended attribute access.
* Both calls pass in a NULL credential, authorizing as "kernel" access.
* Set IO_NODELOCKED in ioflg if the vnode is already locked.
*/
int
vn_extattr_get(struct vnode *vp, int ioflg, int attrnamespace,
const char *attrname, int *buflen, char *buf, struct thread *td)
{
struct uio auio;
struct iovec iov;
int error;
iov.iov_len = *buflen;
iov.iov_base = buf;
auio.uio_iov = &iov;
auio.uio_iovcnt = 1;
auio.uio_rw = UIO_READ;
auio.uio_segflg = UIO_SYSSPACE;
auio.uio_td = td;
auio.uio_offset = 0;
auio.uio_resid = *buflen;
if ((ioflg & IO_NODELOCKED) == 0)
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
ASSERT_VOP_LOCKED(vp, "IO_NODELOCKED with no vp lock held");
/* authorize attribute retrieval as kernel */
error = VOP_GETEXTATTR(vp, attrnamespace, attrname, &auio, NULL, NULL,
td);
if ((ioflg & IO_NODELOCKED) == 0)
VOP_UNLOCK(vp, 0);
if (error == 0) {
*buflen = *buflen - auio.uio_resid;
}
return (error);
}
/*
* XXX failure mode if partially written?
*/
int
vn_extattr_set(struct vnode *vp, int ioflg, int attrnamespace,
const char *attrname, int buflen, char *buf, struct thread *td)
{
struct uio auio;
struct iovec iov;
struct mount *mp;
int error;
iov.iov_len = buflen;
iov.iov_base = buf;
auio.uio_iov = &iov;
auio.uio_iovcnt = 1;
auio.uio_rw = UIO_WRITE;
auio.uio_segflg = UIO_SYSSPACE;
auio.uio_td = td;
auio.uio_offset = 0;
auio.uio_resid = buflen;
if ((ioflg & IO_NODELOCKED) == 0) {
if ((error = vn_start_write(vp, &mp, V_WAIT)) != 0)
return (error);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
}
ASSERT_VOP_LOCKED(vp, "IO_NODELOCKED with no vp lock held");
/* authorize attribute setting as kernel */
error = VOP_SETEXTATTR(vp, attrnamespace, attrname, &auio, NULL, td);
if ((ioflg & IO_NODELOCKED) == 0) {
vn_finished_write(mp);
VOP_UNLOCK(vp, 0);
}
return (error);
}
int
vn_extattr_rm(struct vnode *vp, int ioflg, int attrnamespace,
const char *attrname, struct thread *td)
{
struct mount *mp;
int error;
if ((ioflg & IO_NODELOCKED) == 0) {
if ((error = vn_start_write(vp, &mp, V_WAIT)) != 0)
return (error);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
}
ASSERT_VOP_LOCKED(vp, "IO_NODELOCKED with no vp lock held");
/* authorize attribute removal as kernel */
error = VOP_DELETEEXTATTR(vp, attrnamespace, attrname, NULL, td);
if (error == EOPNOTSUPP)
error = VOP_SETEXTATTR(vp, attrnamespace, attrname, NULL,
NULL, td);
if ((ioflg & IO_NODELOCKED) == 0) {
vn_finished_write(mp);
VOP_UNLOCK(vp, 0);
}
return (error);
}
int
vn_vget_ino(struct vnode *vp, ino_t ino, int lkflags, struct vnode **rvp)
{
struct mount *mp;
int ltype, error;
mp = vp->v_mount;
ltype = VOP_ISLOCKED(vp);
KASSERT(ltype == LK_EXCLUSIVE || ltype == LK_SHARED,
("vn_vget_ino: vp not locked"));
error = vfs_busy(mp, MBF_NOWAIT);
if (error != 0) {
vfs_ref(mp);
VOP_UNLOCK(vp, 0);
error = vfs_busy(mp, 0);
vn_lock(vp, ltype | LK_RETRY);
vfs_rel(mp);
if (error != 0)
return (ENOENT);
if (vp->v_iflag & VI_DOOMED) {
vfs_unbusy(mp);
return (ENOENT);
}
}
VOP_UNLOCK(vp, 0);
error = VFS_VGET(mp, ino, lkflags, rvp);
vfs_unbusy(mp);
vn_lock(vp, ltype | LK_RETRY);
if (vp->v_iflag & VI_DOOMED) {
if (error == 0)
vput(*rvp);
error = ENOENT;
}
return (error);
}
int
vn_rlimit_fsize(const struct vnode *vp, const struct uio *uio,
const struct thread *td)
{
if (vp->v_type != VREG || td == NULL)
return (0);
PROC_LOCK(td->td_proc);
2010-05-06 18:52:41 +00:00
if ((uoff_t)uio->uio_offset + uio->uio_resid >
lim_cur(td->td_proc, RLIMIT_FSIZE)) {
kern_psignal(td->td_proc, SIGXFSZ);
PROC_UNLOCK(td->td_proc);
return (EFBIG);
}
PROC_UNLOCK(td->td_proc);
return (0);
}
int
vn_chmod(struct file *fp, mode_t mode, struct ucred *active_cred,
struct thread *td)
{
struct vnode *vp;
vp = fp->f_vnode;
#ifdef AUDIT
vn_lock(vp, LK_SHARED | LK_RETRY);
AUDIT_ARG_VNODE1(vp);
VOP_UNLOCK(vp, 0);
#endif
2013-03-01 21:58:56 +00:00
return (setfmode(td, active_cred, vp, mode));
}
int
vn_chown(struct file *fp, uid_t uid, gid_t gid, struct ucred *active_cred,
struct thread *td)
{
struct vnode *vp;
vp = fp->f_vnode;
#ifdef AUDIT
vn_lock(vp, LK_SHARED | LK_RETRY);
AUDIT_ARG_VNODE1(vp);
VOP_UNLOCK(vp, 0);
#endif
2013-03-01 21:58:56 +00:00
return (setfown(td, active_cred, vp, uid, gid));
}
void
vn_pages_remove(struct vnode *vp, vm_pindex_t start, vm_pindex_t end)
{
vm_object_t object;
if ((object = vp->v_object) == NULL)
return;
VM_OBJECT_WLOCK(object);
vm_object_page_remove(object, start, end, 0);
VM_OBJECT_WUNLOCK(object);
}
int
vn_bmap_seekhole(struct vnode *vp, u_long cmd, off_t *off, struct ucred *cred)
{
struct vattr va;
daddr_t bn, bnp;
uint64_t bsize;
off_t noff;
int error;
KASSERT(cmd == FIOSEEKHOLE || cmd == FIOSEEKDATA,
("Wrong command %lu", cmd));
if (vn_lock(vp, LK_SHARED) != 0)
return (EBADF);
if (vp->v_type != VREG) {
error = ENOTTY;
goto unlock;
}
error = VOP_GETATTR(vp, &va, cred);
if (error != 0)
goto unlock;
noff = *off;
if (noff >= va.va_size) {
error = ENXIO;
goto unlock;
}
bsize = vp->v_mount->mnt_stat.f_iosize;
for (bn = noff / bsize; noff < va.va_size; bn++, noff += bsize) {
error = VOP_BMAP(vp, bn, NULL, &bnp, NULL, NULL);
if (error == EOPNOTSUPP) {
error = ENOTTY;
goto unlock;
}
if ((bnp == -1 && cmd == FIOSEEKHOLE) ||
(bnp != -1 && cmd == FIOSEEKDATA)) {
noff = bn * bsize;
if (noff < *off)
noff = *off;
goto unlock;
}
}
if (noff > va.va_size)
noff = va.va_size;
/* noff == va.va_size. There is an implicit hole at the end of file. */
if (cmd == FIOSEEKDATA)
error = ENXIO;
unlock:
VOP_UNLOCK(vp, 0);
if (error == 0)
*off = noff;
return (error);
}