d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2903a30d77
freebsd-skq/sys/dev/mii/miidevs.h

145 lines
5.7 KiB
C
Raw Normal View History

Regenerate miidevs.h.
1999-08-29 15:44:07 +00:00
/* $FreeBSD$ */
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
/*
* THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
*
* generated from:
Regenerate miidevs.h.
1999-08-29 15:44:07 +00:00
* Id: miidevs,v 1.3 1999/08/29 15:42:04 wpaul Exp
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
*/
/*$NetBSD: miidevs,v 1.6 1999/05/14 11:37:30 drochner Exp $*/
/*-
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* List of known MII OUIs.
* For a complete list see http://standards.ieee.org/regauth/oui/
*
* XXX Vendors do obviously not agree how OUIs (18 bit) are mapped
* to the 16 bits available in the id registers. The MII_OUI() macro
* in "mii.h" reflects the most obvious way. If a vendor uses a
* different mapping, an "xx" prefixed OUI is defined here which is
* mangled accordingly to compensate.
*/
#define MII_OUI_AMD 0x00001a /* Advanced Micro Devices */
Regenerate miidevs.h.
1999-08-29 15:44:07 +00:00
#define MII_OUI_BROADCOM 0x001018 /* Broadcom Corporation */
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
#define MII_OUI_DAVICOM 0x00606e /* Davicom Semiconductor */
#define MII_OUI_ICS 0x00a0be /* Integrated Circuit Systems */
#define MII_OUI_INTEL 0x00aa00 /* Intel */
#define MII_OUI_LEVEL1 0x00207b /* Level 1 */
#define MII_OUI_NATSEMI 0x080017 /* National Semiconductor */
#define MII_OUI_QUALSEMI 0x006051 /* Quality Semiconductor */
#define MII_OUI_SEEQ 0x00a07d /* Seeq */
#define MII_OUI_SIS 0x00e006 /* Silicon Integrated Systems */
#define MII_OUI_TI 0x080028 /* Texas Instruments */
/* in the 79c873, AMD uses another OUI (which matches Davicom!) */
#define MII_OUI_xxAMD 0x00606e /* Advanced Micro Devices */
/* some vendors have the bits swapped within bytes
(ie, ordered as on the wire) */
#define MII_OUI_xxICS 0x00057d /* Integrated Circuit Systems */
#define MII_OUI_xxSEEQ 0x0005be /* Seeq */
#define MII_OUI_xxSIS 0x000760 /* Silicon Integrated Systems */
#define MII_OUI_xxTI 0x100014 /* Texas Instruments */
/* Level 1 is completely different - from right to left.
(Two bits get lost in the third OUI byte.) */
#define MII_OUI_xxLEVEL1 0x1e0400 /* Level 1 */
/* Don't know what's going on here. */
#define MII_OUI_xxDAVICOM 0x006040 /* Davicom Semiconductor */
/*
* List of known models. Grouped by oui.
*/
/* Advanced Micro Devices PHYs */
#define MII_MODEL_xxAMD_79C873 0x0000
#define MII_STR_xxAMD_79C873 "Am79C873 10/100 media interface"
#define MII_MODEL_AMD_79c973phy 0x0036
#define MII_STR_AMD_79c973phy "Am79c973 internal PHY"
Regenerate miidevs.h.
1999-08-29 15:44:07 +00:00
/* Broadcom Corp. PHYs. */
#define MII_MODEL_BROADCOM_3c905Cphy 0x0017
#define MII_STR_BROADCOM_3c905Cphy "3c905C 10/100 internal PHY"
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface. This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers. There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small. Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code. I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
1999-08-21 17:40:53 +00:00
/* Davicom Semiconductor PHYs */
#define MII_MODEL_xxDAVICOM_DM9101 0x0000
#define MII_STR_xxDAVICOM_DM9101 "DM9101 10/100 media interface"
/* Integrated Circuit Systems PHYs */
#define MII_MODEL_xxICS_1890 0x0002
#define MII_STR_xxICS_1890 "ICS1890 10/100 media interface"
/* Intel PHYs */
#define MII_MODEL_INTEL_I82555 0x0015
#define MII_STR_INTEL_I82555 "i82555 10/100 media interface"
/* Level 1 PHYs */
#define MII_MODEL_xxLEVEL1_LXT970 0x0000
#define MII_STR_xxLEVEL1_LXT970 "LXT970 10/100 media interface"
/* National Semiconductor PHYs */
#define MII_MODEL_NATSEMI_DP83840 0x0000
#define MII_STR_NATSEMI_DP83840 "DP83840 10/100 media interface"
#define MII_MODEL_NATSEMI_DP83843 0x0001
#define MII_STR_NATSEMI_DP83843 "DP83843 10/100 media interface"
/* Quality Semiconductor PHYs */
#define MII_MODEL_QUALSEMI_QS6612 0x0000
#define MII_STR_QUALSEMI_QS6612 "QS6612 10/100 media interface"
/* Seeq PHYs */
#define MII_MODEL_xxSEEQ_80220 0x0003
#define MII_STR_xxSEEQ_80220 "Seeq 80220 10/100 media interface"
#define MII_MODEL_xxSEEQ_84220 0x0004
#define MII_STR_xxSEEQ_84220 "Seeq 84220 10/100 media interface"
/* Silicon Integrated Systems PHYs */
#define MII_MODEL_xxSIS_900 0x0000
#define MII_STR_xxSIS_900 "SiS 900 10/100 media interface"
/* Texas Instruments PHYs */
#define MII_MODEL_xxTI_TLAN10T 0x0001
#define MII_STR_xxTI_TLAN10T "ThunderLAN 10baseT media interface"
#define MII_MODEL_xxTI_100VGPMI 0x0002
#define MII_STR_xxTI_100VGPMI "ThunderLAN 100VG-AnyLan media interface"
Reference in New Issue Copy Permalink