d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
33c207f0e2
freebsd-skq/sys/kern/uipc_socket2.c

398 lines
10 KiB
C
Raw Normal View History

/* -> /*- for copyright notices, minor format tweaks as necessary
2005-01-06 23:35:40 +00:00
/*-
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1988, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)uipc_socket2.c 8.1 (Berkeley) 6/10/93
*/
Use __FBSDID().
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Revert the last bits of my bogus move of NMBCLUSTERS to <sys/param.h>
2001-06-01 21:47:34 +00:00
#include "opt_param.h"
Introduce support for Mandatory Access Control and extensible kernel access control. Invoke the necessary MAC entry points to maintain labels on sockets. In particular, invoke entry points during socket allocation and destruction, as well as creation by a process or during an accept-scenario (sonewconn). For UNIX domain sockets, also assign a peer label. As the socket code isn't locked down yet, locking interactions are not yet clear. Various protocol stack socket operations (such as peer label assignment for IPv4) will follow. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-31 03:03:22 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
Convert socket structures to be type-stable and add a version number. Define a parameter which indicates the maximum number of sockets in a system, and use this to size the zone allocators used for sockets and for certain PCBs. Convert PF_LOCAL PCB structures to be type-stable and add a version number. Define an external format for infomation about socket structures and use it in several places. Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through sysctl(3) without blocking network interrupts for an unreasonable length of time. This probably still has some bugs and/or race conditions, but it seems to work well enough on my machines. It is now possible for `netstat' to get almost all of its information via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00
#include <sys/domain.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/lock.h>
Include file cleanup; mac.h and malloc.h at one point had ordering relationship requirements, and no longer do. Reminded by: bde
2002-08-01 17:47:56 +00:00
#include <sys/malloc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/mbuf.h>
Revert the change of #includes in sys/filedesc.h and sys/socketvar.h. Requested by: bde Since locking sigio_lock is usually followed by calling pgsigio(), move the declaration of sigio_lock and the definitions of SIGIO_*() to sys/signalvar.h. While I am here, sort include files alphabetically, where possible.
2002-04-30 01:54:54 +00:00
#include <sys/mutex.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/proc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/protosw.h>
Change so_cred's type to a ucred, not a pcred. THis makes more sense, actually. Make a sonewconn3() which takes an extra argument (proc) so new sockets created with sonewconn() from a user's system call get the correct credentials, not just the parent's credentials.
1999-09-19 02:17:02 +00:00
#include <sys/resourcevar.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/socket.h>
#include <sys/socketvar.h>
Revert the change of #includes in sys/filedesc.h and sys/socketvar.h. Requested by: bde Since locking sigio_lock is usually followed by calling pgsigio(), move the declaration of sigio_lock and the definitions of SIGIO_*() to sys/signalvar.h. While I am here, sort include files alphabetically, where possible.
2002-04-30 01:54:54 +00:00
#include <sys/stat.h>
Make AIO a loadable module. Remove the explicit call to aio_proc_rundown() from exit1(), instead AIO will use at_exit(9). Add functions at_exec(9), rm_at_exec(9) which function nearly the same as at_exec(9) and rm_at_exec(9), these functions are called on behalf of modules at the time of execve(2) after the image activator has run. Use a modified version of tegge's suggestion via at_exec(9) to close an exploitable race in AIO. Fix SYSCALL_MODULE_HELPER such that it's archetecuterally neutral, the problem was that one had to pass it a paramater indicating the number of arguments which were actually the number of "int". Fix it by using an inline version of the AS macro against the syscall arguments. (AS should be available globally but we'll get to that later.) Add a primative system for dynamically adding kqueue ops, it's really not as sophisticated as it should be, but I'll discuss with jlemon when he's around.
2001-12-29 07:13:47 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Remove non-socket buffer routines from uipc_sockbuf.c, and socket buffer specific routines from uipc_socket2.c following repo-copy. We might rethink the location of one or two at some point, but the division was relatively clean. uipc_sockbuf.c is now the home of routines that manipulate socket buffers.
2006-07-24 16:21:31 +00:00
* Primitive routines for operating on sockets.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
/*
* Procedures to manipulate state flags of socket
* and do appropriate wakeups. Normal sequence from the
* active (originating) side is that soisconnecting() is
* called during processing of connect() call,
* resulting in an eventual call to soisconnected() if/when the
* connection is established. When the connection is torn down
* soisdisconnecting() is called during processing of disconnect() call,
* and soisdisconnected() is called when the connection to the peer
* is totally severed. The semantics of these routines are such that
* connectionless protocols can call soisconnected() and soisdisconnected()
* only, bypassing the in-progress calls when setting up a ``connection''
* takes no time.
*
* From the passive side, a socket is created with
Update one set of comments.. s/so_q0/so_incomp/ and s/so_q/so_comp/ (that's incomplete and complete connections I think)
1999-05-10 18:15:40 +00:00
* two queues of sockets: so_incomp for connections in progress
* and so_comp for connections already made and awaiting user acceptance.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* As a protocol is preparing incoming connections, it creates a socket
Update one set of comments.. s/so_q0/so_incomp/ and s/so_q/so_comp/ (that's incomplete and complete connections I think)
1999-05-10 18:15:40 +00:00
* structure queued on so_incomp by calling sonewconn(). When the connection
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* is established, soisconnected() is called, and transfers the
Update one set of comments.. s/so_q0/so_incomp/ and s/so_q/so_comp/ (that's incomplete and complete connections I think)
1999-05-10 18:15:40 +00:00
* socket structure to so_comp, making it available to accept().
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* If a socket is closed with sockets on either
Update one set of comments.. s/so_q0/so_incomp/ and s/so_q/so_comp/ (that's incomplete and complete connections I think)
1999-05-10 18:15:40 +00:00
* so_incomp or so_comp, these sockets are dropped.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*
* If higher level protocols are implemented in
* the kernel, the wakeups done here will sometimes
* cause software-interrupt process scheduling.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
soisconnecting(so)
register struct socket *so;
{
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
SOCK_LOCK(so);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
so->so_state &= ~(SS_ISCONNECTED|SS_ISDISCONNECTING);
so->so_state |= SS_ISCONNECTING;
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
SOCK_UNLOCK(so);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
void
soisconnected(so)
struct socket *so;
{
Integrate accept locking from rwatson_netperf, introducing a new global mutex, accept_mtx, which serializes access to the following fields across all sockets: so_qlen so_incqlen so_qstate so_comp so_incomp so_list so_head While providing only coarse granularity, this approach avoids lock order issues between sockets by avoiding ownership of the fields by a specific socket and its per-socket mutexes. While here, rewrite soclose(), sofree(), soaccept(), and sonewconn() to add assertions, close additional races and address lock order concerns. In particular: - Reorganize the optimistic concurrency behavior in accept1() to always allocate a file descriptor with falloc() so that if we do find a socket, we don't have to encounter the "Oh, there wasn't a socket" race that can occur if falloc() sleeps in the current code, which broke inbound accept() ordering, not to mention requiring backing out socket state changes in a way that raced with the protocol level. We may want to add a lockless read of the queue state if polling of empty queues proves to be important to optimize. - In accept1(), soref() the socket while holding the accept lock so that the socket cannot be free'd in a race with the protocol layer. Likewise in netgraph equivilents of the accept1() code. - In sonewconn(), loop waiting for the queue to be small enough to insert our new socket once we've committed to inserting it, or races can occur that cause the incomplete socket queue to overfill. In the previously implementation, it was sufficient to simply tested once since calling soabort() didn't release synchronization permitting another thread to insert a socket as we discard a previous one. - In soclose()/sofree()/et al, it is the responsibility of the caller to remove a socket from the incomplete connection queue before calling soabort(), which prevents soabort() from having to walk into the accept socket to release the socket from its queue, and avoids races when releasing the accept mutex to enter soabort(), permitting soabort() to avoid lock ordering issues with the caller. - Generally cluster accept queue related operations together throughout these functions in order to facilitate locking. Annotate new locking in socketvar.h.
2004-06-02 04:15:39 +00:00
struct socket *head;
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
Extend the coverage of the accept and socket mutexes in soisconnected() so that the socket lock is held over the test-and-set removal of the accept filter option during connect, and the two socket mutex regions (transition to connected, perform accept filter) are combined.
2005-03-12 13:39:39 +00:00
ACCEPT_LOCK();
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
SOCK_LOCK(so);
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
so->so_state &= ~(SS_ISCONNECTING|SS_ISDISCONNECTING|SS_ISCONFIRMING);
so->so_state |= SS_ISCONNECTED;
Integrate accept locking from rwatson_netperf, introducing a new global mutex, accept_mtx, which serializes access to the following fields across all sockets: so_qlen so_incqlen so_qstate so_comp so_incomp so_list so_head While providing only coarse granularity, this approach avoids lock order issues between sockets by avoiding ownership of the fields by a specific socket and its per-socket mutexes. While here, rewrite soclose(), sofree(), soaccept(), and sonewconn() to add assertions, close additional races and address lock order concerns. In particular: - Reorganize the optimistic concurrency behavior in accept1() to always allocate a file descriptor with falloc() so that if we do find a socket, we don't have to encounter the "Oh, there wasn't a socket" race that can occur if falloc() sleeps in the current code, which broke inbound accept() ordering, not to mention requiring backing out socket state changes in a way that raced with the protocol level. We may want to add a lockless read of the queue state if polling of empty queues proves to be important to optimize. - In accept1(), soref() the socket while holding the accept lock so that the socket cannot be free'd in a race with the protocol layer. Likewise in netgraph equivilents of the accept1() code. - In sonewconn(), loop waiting for the queue to be small enough to insert our new socket once we've committed to inserting it, or races can occur that cause the incomplete socket queue to overfill. In the previously implementation, it was sufficient to simply tested once since calling soabort() didn't release synchronization permitting another thread to insert a socket as we discard a previous one. - In soclose()/sofree()/et al, it is the responsibility of the caller to remove a socket from the incomplete connection queue before calling soabort(), which prevents soabort() from having to walk into the accept socket to release the socket from its queue, and avoids races when releasing the accept mutex to enter soabort(), permitting soabort() to avoid lock ordering issues with the caller. - Generally cluster accept queue related operations together throughout these functions in order to facilitate locking. Annotate new locking in socketvar.h.
2004-06-02 04:15:39 +00:00
head = so->so_head;
if (head != NULL && (so->so_qstate & SQ_INCOMP)) {
if ((so->so_options & SO_ACCEPTFILTER) == 0) {
Extend the coverage of the accept and socket mutexes in soisconnected() so that the socket lock is held over the test-and-set removal of the accept filter option during connect, and the two socket mutex regions (transition to connected, perform accept filter) are combined.
2005-03-12 13:39:39 +00:00
SOCK_UNLOCK(so);
Integrate accept locking from rwatson_netperf, introducing a new global mutex, accept_mtx, which serializes access to the following fields across all sockets: so_qlen so_incqlen so_qstate so_comp so_incomp so_list so_head While providing only coarse granularity, this approach avoids lock order issues between sockets by avoiding ownership of the fields by a specific socket and its per-socket mutexes. While here, rewrite soclose(), sofree(), soaccept(), and sonewconn() to add assertions, close additional races and address lock order concerns. In particular: - Reorganize the optimistic concurrency behavior in accept1() to always allocate a file descriptor with falloc() so that if we do find a socket, we don't have to encounter the "Oh, there wasn't a socket" race that can occur if falloc() sleeps in the current code, which broke inbound accept() ordering, not to mention requiring backing out socket state changes in a way that raced with the protocol level. We may want to add a lockless read of the queue state if polling of empty queues proves to be important to optimize. - In accept1(), soref() the socket while holding the accept lock so that the socket cannot be free'd in a race with the protocol layer. Likewise in netgraph equivilents of the accept1() code. - In sonewconn(), loop waiting for the queue to be small enough to insert our new socket once we've committed to inserting it, or races can occur that cause the incomplete socket queue to overfill. In the previously implementation, it was sufficient to simply tested once since calling soabort() didn't release synchronization permitting another thread to insert a socket as we discard a previous one. - In soclose()/sofree()/et al, it is the responsibility of the caller to remove a socket from the incomplete connection queue before calling soabort(), which prevents soabort() from having to walk into the accept socket to release the socket from its queue, and avoids races when releasing the accept mutex to enter soabort(), permitting soabort() to avoid lock ordering issues with the caller. - Generally cluster accept queue related operations together throughout these functions in order to facilitate locking. Annotate new locking in socketvar.h.
2004-06-02 04:15:39 +00:00
TAILQ_REMOVE(&head->so_incomp, so, so_list);
head->so_incqlen--;
so->so_qstate &= ~SQ_INCOMP;
TAILQ_INSERT_TAIL(&head->so_comp, so, so_list);
head->so_qlen++;
so->so_qstate |= SQ_COMP;
ACCEPT_UNLOCK();
sorwakeup(head);
wakeup_one(&head->so_timeo);
} else {
ACCEPT_UNLOCK();
so->so_upcall =
head->so_accf->so_accept_filter->accf_callback;
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
so->so_upcallarg = head->so_accf->so_accept_filter_arg;
so->so_rcv.sb_flags |= SB_UPCALL;
so->so_options &= ~SO_ACCEPTFILTER;
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
SOCK_UNLOCK(so);
When upcalling from a socket in soisconnected() for an accept filter, call with flag M_DONTWAIT rather than M_TRYWAIT, as we don't want to do blocking memory allocation (etc) in the netisr. MFC after: 3 days
2005-03-07 13:50:16 +00:00
so->so_upcall(so, so->so_upcallarg, M_DONTWAIT);
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
}
Integrate accept locking from rwatson_netperf, introducing a new global mutex, accept_mtx, which serializes access to the following fields across all sockets: so_qlen so_incqlen so_qstate so_comp so_incomp so_list so_head While providing only coarse granularity, this approach avoids lock order issues between sockets by avoiding ownership of the fields by a specific socket and its per-socket mutexes. While here, rewrite soclose(), sofree(), soaccept(), and sonewconn() to add assertions, close additional races and address lock order concerns. In particular: - Reorganize the optimistic concurrency behavior in accept1() to always allocate a file descriptor with falloc() so that if we do find a socket, we don't have to encounter the "Oh, there wasn't a socket" race that can occur if falloc() sleeps in the current code, which broke inbound accept() ordering, not to mention requiring backing out socket state changes in a way that raced with the protocol level. We may want to add a lockless read of the queue state if polling of empty queues proves to be important to optimize. - In accept1(), soref() the socket while holding the accept lock so that the socket cannot be free'd in a race with the protocol layer. Likewise in netgraph equivilents of the accept1() code. - In sonewconn(), loop waiting for the queue to be small enough to insert our new socket once we've committed to inserting it, or races can occur that cause the incomplete socket queue to overfill. In the previously implementation, it was sufficient to simply tested once since calling soabort() didn't release synchronization permitting another thread to insert a socket as we discard a previous one. - In soclose()/sofree()/et al, it is the responsibility of the caller to remove a socket from the incomplete connection queue before calling soabort(), which prevents soabort() from having to walk into the accept socket to release the socket from its queue, and avoids races when releasing the accept mutex to enter soabort(), permitting soabort() to avoid lock ordering issues with the caller. - Generally cluster accept queue related operations together throughout these functions in order to facilitate locking. Annotate new locking in socketvar.h.
2004-06-02 04:15:39 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Extend the coverage of the accept and socket mutexes in soisconnected() so that the socket lock is held over the test-and-set removal of the accept filter option during connect, and the two socket mutex regions (transition to connected, perform accept filter) are combined.
2005-03-12 13:39:39 +00:00
SOCK_UNLOCK(so);
Integrate accept locking from rwatson_netperf, introducing a new global mutex, accept_mtx, which serializes access to the following fields across all sockets: so_qlen so_incqlen so_qstate so_comp so_incomp so_list so_head While providing only coarse granularity, this approach avoids lock order issues between sockets by avoiding ownership of the fields by a specific socket and its per-socket mutexes. While here, rewrite soclose(), sofree(), soaccept(), and sonewconn() to add assertions, close additional races and address lock order concerns. In particular: - Reorganize the optimistic concurrency behavior in accept1() to always allocate a file descriptor with falloc() so that if we do find a socket, we don't have to encounter the "Oh, there wasn't a socket" race that can occur if falloc() sleeps in the current code, which broke inbound accept() ordering, not to mention requiring backing out socket state changes in a way that raced with the protocol level. We may want to add a lockless read of the queue state if polling of empty queues proves to be important to optimize. - In accept1(), soref() the socket while holding the accept lock so that the socket cannot be free'd in a race with the protocol layer. Likewise in netgraph equivilents of the accept1() code. - In sonewconn(), loop waiting for the queue to be small enough to insert our new socket once we've committed to inserting it, or races can occur that cause the incomplete socket queue to overfill. In the previously implementation, it was sufficient to simply tested once since calling soabort() didn't release synchronization permitting another thread to insert a socket as we discard a previous one. - In soclose()/sofree()/et al, it is the responsibility of the caller to remove a socket from the incomplete connection queue before calling soabort(), which prevents soabort() from having to walk into the accept socket to release the socket from its queue, and avoids races when releasing the accept mutex to enter soabort(), permitting soabort() to avoid lock ordering issues with the caller. - Generally cluster accept queue related operations together throughout these functions in order to facilitate locking. Annotate new locking in socketvar.h.
2004-06-02 04:15:39 +00:00
ACCEPT_UNLOCK();
wakeup(&so->so_timeo);
sorwakeup(so);
sowwakeup(so);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
soisdisconnecting(so)
register struct socket *so;
{
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
/*
Change two XXX's to two notes: the fact that SOCK_LOCK(so) == SOCKBUF_LOCK(&so->so_rcv) is encoded, which is worth noting, but not a bug.
2006-08-02 16:23:52 +00:00
* Note: This code assumes that SOCK_LOCK(so) and
In the current world order, each socket has two mutexes: a mutex that protects socket and receive socket buffer state, and a second mutex to protect send socket buffer state. In some places, the mutex shared between the socket and receive socket buffer will be acquired twice, once by each layer, resulting in some inconsistency, but providing the abstraction benefit of being able to more easily separate the two mutexes in the future if desired. When transitioning a socket to the SS_ISDISCONNECTING or SS_ISDISCONNECTED states, grab the socket/receive socket buffer lock once rather than grabbing it as the socket lock, modifying socket state, then grabbing a second time as the receive lock in order to modify the socket buffer state to indicate no further data can be read. This change is believed to close a race between the change in socket state and the change in socket buffer state, which for a remotely initiated close on a UNIX domain socket, resulted in soreceive() returning ENOTCONN rather than an EOF condition. A similar race still exists in the case of send, however, and is harder to fix as the socket and send socket buffer mutexes are not the same, and we would like to avoid holding combinations of socket mutexes over sb_upcall until we've finished clarifying the locking protocol for upcalls. This change has the side affect of reducing the number of mutex operations to initiate disconnect or perform disconnect on a socket by two. PR: 78824 Rerported by: Marc Olzheim <marcolz@stack.nl> MFC after: 2 weeks
2005-05-27 17:16:43 +00:00
* SOCKBUF_LOCK(&so->so_rcv) are the same.
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
*/
In the current world order, each socket has two mutexes: a mutex that protects socket and receive socket buffer state, and a second mutex to protect send socket buffer state. In some places, the mutex shared between the socket and receive socket buffer will be acquired twice, once by each layer, resulting in some inconsistency, but providing the abstraction benefit of being able to more easily separate the two mutexes in the future if desired. When transitioning a socket to the SS_ISDISCONNECTING or SS_ISDISCONNECTED states, grab the socket/receive socket buffer lock once rather than grabbing it as the socket lock, modifying socket state, then grabbing a second time as the receive lock in order to modify the socket buffer state to indicate no further data can be read. This change is believed to close a race between the change in socket state and the change in socket buffer state, which for a remotely initiated close on a UNIX domain socket, resulted in soreceive() returning ENOTCONN rather than an EOF condition. A similar race still exists in the case of send, however, and is harder to fix as the socket and send socket buffer mutexes are not the same, and we would like to avoid holding combinations of socket mutexes over sb_upcall until we've finished clarifying the locking protocol for upcalls. This change has the side affect of reducing the number of mutex operations to initiate disconnect or perform disconnect on a socket by two. PR: 78824 Rerported by: Marc Olzheim <marcolz@stack.nl> MFC after: 2 weeks
2005-05-27 17:16:43 +00:00
SOCKBUF_LOCK(&so->so_rcv);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
so->so_state &= ~SS_ISCONNECTING;
The socket field so_state is used to hold a variety of socket related flags relating to several aspects of socket functionality. This change breaks out several bits relating to send and receive operation into a new per-socket buffer field, sb_state, in order to facilitate locking. This is required because, in order to provide more granular locking of sockets, different state fields have different locking properties. The following fields are moved to sb_state: SS_CANTRCVMORE (so_state) SS_CANTSENDMORE (so_state) SS_RCVATMARK (so_state) Rename respectively to: SBS_CANTRCVMORE (so_rcv.sb_state) SBS_CANTSENDMORE (so_snd.sb_state) SBS_RCVATMARK (so_rcv.sb_state) This facilitates locking by isolating fields to be located with other identically locked fields, and permits greater granularity in socket locking by avoiding storing fields with different locking semantics in the same short (avoiding locking conflicts). In the future, we may wish to coallesce sb_state and sb_flags; for the time being I leave them separate and there is no additional memory overhead due to the packing/alignment of shorts in the socket buffer structure.
2004-06-14 18:16:22 +00:00
so->so_state |= SS_ISDISCONNECTING;
so->so_rcv.sb_state |= SBS_CANTRCVMORE;
Reduce the number of unnecessary unlock-relocks on socket buffer mutexes associated with performing a wakeup on the socket buffer: - When performing an sbappend*() followed by a so[rw]wakeup(), explicitly acquire the socket buffer lock and use the _locked() variants of both calls. Note that the _locked() sowakeup() versions unlock the mutex on return. This is done in uipc_send(), divert_packet(), mroute socket_send(), raw_append(), tcp_reass(), tcp_input(), and udp_append(). - When the socket buffer lock is dropped before a sowakeup(), remove the explicit unlock and use the _locked() sowakeup() variant. This is done in soisdisconnecting(), soisdisconnected() when setting the can't send/ receive flags and dropping data, and in uipc_rcvd() which adjusting back-pressure on the sockets. For UNIX domain sockets running mpsafe with a contention-intensive SMP mysql benchmark, this results in a 1.6% query rate improvement due to reduce mutex costs.
2004-06-26 19:10:39 +00:00
sorwakeup_locked(so);
Grab the socket buffer send or receive mutex when performing a read-modify-write on the sb_state field. This commit catches only the "easy" ones where it doesn't interact with as yet unmerged locking.
2004-06-15 03:51:44 +00:00
SOCKBUF_LOCK(&so->so_snd);
The socket field so_state is used to hold a variety of socket related flags relating to several aspects of socket functionality. This change breaks out several bits relating to send and receive operation into a new per-socket buffer field, sb_state, in order to facilitate locking. This is required because, in order to provide more granular locking of sockets, different state fields have different locking properties. The following fields are moved to sb_state: SS_CANTRCVMORE (so_state) SS_CANTSENDMORE (so_state) SS_RCVATMARK (so_state) Rename respectively to: SBS_CANTRCVMORE (so_rcv.sb_state) SBS_CANTSENDMORE (so_snd.sb_state) SBS_RCVATMARK (so_rcv.sb_state) This facilitates locking by isolating fields to be located with other identically locked fields, and permits greater granularity in socket locking by avoiding storing fields with different locking semantics in the same short (avoiding locking conflicts). In the future, we may wish to coallesce sb_state and sb_flags; for the time being I leave them separate and there is no additional memory overhead due to the packing/alignment of shorts in the socket buffer structure.
2004-06-14 18:16:22 +00:00
so->so_snd.sb_state |= SBS_CANTSENDMORE;
Reduce the number of unnecessary unlock-relocks on socket buffer mutexes associated with performing a wakeup on the socket buffer: - When performing an sbappend*() followed by a so[rw]wakeup(), explicitly acquire the socket buffer lock and use the _locked() variants of both calls. Note that the _locked() sowakeup() versions unlock the mutex on return. This is done in uipc_send(), divert_packet(), mroute socket_send(), raw_append(), tcp_reass(), tcp_input(), and udp_append(). - When the socket buffer lock is dropped before a sowakeup(), remove the explicit unlock and use the _locked() sowakeup() variant. This is done in soisdisconnecting(), soisdisconnected() when setting the can't send/ receive flags and dropping data, and in uipc_rcvd() which adjusting back-pressure on the sockets. For UNIX domain sockets running mpsafe with a contention-intensive SMP mysql benchmark, this results in a 1.6% query rate improvement due to reduce mutex costs.
2004-06-26 19:10:39 +00:00
sowwakeup_locked(so);
More caddr_t removal. Change struct knote's kn_hook from caddr_t to void *.
2002-06-29 00:29:12 +00:00
wakeup(&so->so_timeo);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Remove so*_locked(), which were backed out by mistake.
2002-06-18 07:42:02 +00:00
soisdisconnected(so)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct socket *so;
{
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
/*
Change two XXX's to two notes: the fact that SOCK_LOCK(so) == SOCKBUF_LOCK(&so->so_rcv) is encoded, which is worth noting, but not a bug.
2006-08-02 16:23:52 +00:00
* Note: This code assumes that SOCK_LOCK(so) and
In the current world order, each socket has two mutexes: a mutex that protects socket and receive socket buffer state, and a second mutex to protect send socket buffer state. In some places, the mutex shared between the socket and receive socket buffer will be acquired twice, once by each layer, resulting in some inconsistency, but providing the abstraction benefit of being able to more easily separate the two mutexes in the future if desired. When transitioning a socket to the SS_ISDISCONNECTING or SS_ISDISCONNECTED states, grab the socket/receive socket buffer lock once rather than grabbing it as the socket lock, modifying socket state, then grabbing a second time as the receive lock in order to modify the socket buffer state to indicate no further data can be read. This change is believed to close a race between the change in socket state and the change in socket buffer state, which for a remotely initiated close on a UNIX domain socket, resulted in soreceive() returning ENOTCONN rather than an EOF condition. A similar race still exists in the case of send, however, and is harder to fix as the socket and send socket buffer mutexes are not the same, and we would like to avoid holding combinations of socket mutexes over sb_upcall until we've finished clarifying the locking protocol for upcalls. This change has the side affect of reducing the number of mutex operations to initiate disconnect or perform disconnect on a socket by two. PR: 78824 Rerported by: Marc Olzheim <marcolz@stack.nl> MFC after: 2 weeks
2005-05-27 17:16:43 +00:00
* SOCKBUF_LOCK(&so->so_rcv) are the same.
Merge additional socket buffer locking from rwatson_netperf: - Lock down low hanging fruit use of sb_flags with socket buffer lock. - Lock down low hanging fruit use of so_state with socket lock. - Lock down low hanging fruit use of so_options. - Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with socket buffer lock. - Annotate situations in which we unlock the socket lock and then grab the receive socket buffer lock, which are currently actually the same lock. Depending on how we want to play our cards, we may want to coallesce these lock uses to reduce overhead. - Convert a if()->panic() into a KASSERT relating to so_state in soaccept(). - Remove a number of splnet()/splx() references. More complex merging of socket and socket buffer locking to follow.
2004-06-17 22:48:11 +00:00
*/
In the current world order, each socket has two mutexes: a mutex that protects socket and receive socket buffer state, and a second mutex to protect send socket buffer state. In some places, the mutex shared between the socket and receive socket buffer will be acquired twice, once by each layer, resulting in some inconsistency, but providing the abstraction benefit of being able to more easily separate the two mutexes in the future if desired. When transitioning a socket to the SS_ISDISCONNECTING or SS_ISDISCONNECTED states, grab the socket/receive socket buffer lock once rather than grabbing it as the socket lock, modifying socket state, then grabbing a second time as the receive lock in order to modify the socket buffer state to indicate no further data can be read. This change is believed to close a race between the change in socket state and the change in socket buffer state, which for a remotely initiated close on a UNIX domain socket, resulted in soreceive() returning ENOTCONN rather than an EOF condition. A similar race still exists in the case of send, however, and is harder to fix as the socket and send socket buffer mutexes are not the same, and we would like to avoid holding combinations of socket mutexes over sb_upcall until we've finished clarifying the locking protocol for upcalls. This change has the side affect of reducing the number of mutex operations to initiate disconnect or perform disconnect on a socket by two. PR: 78824 Rerported by: Marc Olzheim <marcolz@stack.nl> MFC after: 2 weeks
2005-05-27 17:16:43 +00:00
SOCKBUF_LOCK(&so->so_rcv);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
so->so_state &= ~(SS_ISCONNECTING|SS_ISCONNECTED|SS_ISDISCONNECTING);
The socket field so_state is used to hold a variety of socket related flags relating to several aspects of socket functionality. This change breaks out several bits relating to send and receive operation into a new per-socket buffer field, sb_state, in order to facilitate locking. This is required because, in order to provide more granular locking of sockets, different state fields have different locking properties. The following fields are moved to sb_state: SS_CANTRCVMORE (so_state) SS_CANTSENDMORE (so_state) SS_RCVATMARK (so_state) Rename respectively to: SBS_CANTRCVMORE (so_rcv.sb_state) SBS_CANTSENDMORE (so_snd.sb_state) SBS_RCVATMARK (so_rcv.sb_state) This facilitates locking by isolating fields to be located with other identically locked fields, and permits greater granularity in socket locking by avoiding storing fields with different locking semantics in the same short (avoiding locking conflicts). In the future, we may wish to coallesce sb_state and sb_flags; for the time being I leave them separate and there is no additional memory overhead due to the packing/alignment of shorts in the socket buffer structure.
2004-06-14 18:16:22 +00:00
so->so_state |= SS_ISDISCONNECTED;
so->so_rcv.sb_state |= SBS_CANTRCVMORE;
Reduce the number of unnecessary unlock-relocks on socket buffer mutexes associated with performing a wakeup on the socket buffer: - When performing an sbappend*() followed by a so[rw]wakeup(), explicitly acquire the socket buffer lock and use the _locked() variants of both calls. Note that the _locked() sowakeup() versions unlock the mutex on return. This is done in uipc_send(), divert_packet(), mroute socket_send(), raw_append(), tcp_reass(), tcp_input(), and udp_append(). - When the socket buffer lock is dropped before a sowakeup(), remove the explicit unlock and use the _locked() sowakeup() variant. This is done in soisdisconnecting(), soisdisconnected() when setting the can't send/ receive flags and dropping data, and in uipc_rcvd() which adjusting back-pressure on the sockets. For UNIX domain sockets running mpsafe with a contention-intensive SMP mysql benchmark, this results in a 1.6% query rate improvement due to reduce mutex costs.
2004-06-26 19:10:39 +00:00
sorwakeup_locked(so);
Grab the socket buffer send or receive mutex when performing a read-modify-write on the sb_state field. This commit catches only the "easy" ones where it doesn't interact with as yet unmerged locking.
2004-06-15 03:51:44 +00:00
SOCKBUF_LOCK(&so->so_snd);
The socket field so_state is used to hold a variety of socket related flags relating to several aspects of socket functionality. This change breaks out several bits relating to send and receive operation into a new per-socket buffer field, sb_state, in order to facilitate locking. This is required because, in order to provide more granular locking of sockets, different state fields have different locking properties. The following fields are moved to sb_state: SS_CANTRCVMORE (so_state) SS_CANTSENDMORE (so_state) SS_RCVATMARK (so_state) Rename respectively to: SBS_CANTRCVMORE (so_rcv.sb_state) SBS_CANTSENDMORE (so_snd.sb_state) SBS_RCVATMARK (so_rcv.sb_state) This facilitates locking by isolating fields to be located with other identically locked fields, and permits greater granularity in socket locking by avoiding storing fields with different locking semantics in the same short (avoiding locking conflicts). In the future, we may wish to coallesce sb_state and sb_flags; for the time being I leave them separate and there is no additional memory overhead due to the packing/alignment of shorts in the socket buffer structure.
2004-06-14 18:16:22 +00:00
so->so_snd.sb_state |= SBS_CANTSENDMORE;
Merge next step in socket buffer locking: - sowakeup() now asserts the socket buffer lock on entry. Move the call to KNOTE higher in sowakeup() so that it is made with the socket buffer lock held for consistency with other calls. Release the socket buffer lock prior to calling into pgsigio(), so_upcall(), or aio_swake(). Locking for this event management will need revisiting in the future, but this model avoids lock order reversals when upcalls into other subsystems result in socket/socket buffer operations. Assert that the socket buffer lock is not held at the end of the function. - Wrapper macros for sowakeup(), sorwakeup() and sowwakeup(), now have _locked versions which assert the socket buffer lock on entry. If a wakeup is required by sb_notify(), invoke sowakeup(); otherwise, unconditionally release the socket buffer lock. This results in the socket buffer lock being released whether a wakeup is required or not. - Break out socantsendmore() into socantsendmore_locked() that asserts the socket buffer lock. socantsendmore() unconditionally locks the socket buffer before calling socantsendmore_locked(). Note that both functions return with the socket buffer unlocked as socantsendmore_locked() calls sowwakeup_locked() which has the same properties. Assert that the socket buffer is unlocked on return. - Break out socantrcvmore() into socantrcvmore_locked() that asserts the socket buffer lock. socantrcvmore() unconditionally locks the socket buffer before calling socantrcvmore_locked(). Note that both functions return with the socket buffer unlocked as socantrcvmore_locked() calls sorwakeup_locked() which has similar properties. Assert that the socket buffer is unlocked on return. - Break out sbrelease() into a sbrelease_locked() that asserts the socket buffer lock. sbrelease() unconditionally locks the socket buffer before calling sbrelease_locked(). sbrelease_locked() now invokes sbflush_locked() instead of sbflush(). - Assert the socket buffer lock in socket buffer sanity check functions sblastrecordchk(), sblastmbufchk(). - Assert the socket buffer lock in SBLINKRECORD(). - Break out various sbappend() functions into sbappend_locked() (and variations on that name) that assert the socket buffer lock. The !_locked() variations unconditionally lock the socket buffer before calling their _locked counterparts. Internally, make sure to call _locked() support routines, etc, if already holding the socket buffer lock. - Break out sbinsertoob() into sbinsertoob_locked() that asserts the socket buffer lock. sbinsertoob() unconditionally locks the socket buffer before calling sbinsertoob_locked(). - Break out sbflush() into sbflush_locked() that asserts the socket buffer lock. sbflush() unconditionally locks the socket buffer before calling sbflush_locked(). Update panic strings for new function names. - Break out sbdrop() into sbdrop_locked() that asserts the socket buffer lock. sbdrop() unconditionally locks the socket buffer before calling sbdrop_locked(). - Break out sbdroprecord() into sbdroprecord_locked() that asserts the socket buffer lock. sbdroprecord() unconditionally locks the socket buffer before calling sbdroprecord_locked(). - sofree() now calls socantsendmore_locked() and re-acquires the socket buffer lock on return. It also now calls sbrelease_locked(). - sorflush() now calls socantrcvmore_locked() and re-acquires the socket buffer lock on return. Clean up/mess up other behavior in sorflush() relating to the temporary stack copy of the socket buffer used with dom_dispose by more properly initializing the temporary copy, and selectively bzeroing/copying more carefully to prevent WITNESS from getting confused by improperly initialized mutexes. Annotate why that's necessary, or at least, needed. - soisconnected() now calls sbdrop_locked() before unlocking the socket buffer to avoid locking overhead. Some parts of this change were: Submitted by: sam Sponsored by: FreeBSD Foundation Obtained from: BSD/OS
2004-06-21 00:20:43 +00:00
sbdrop_locked(&so->so_snd, so->so_snd.sb_cc);
Reduce the number of unnecessary unlock-relocks on socket buffer mutexes associated with performing a wakeup on the socket buffer: - When performing an sbappend*() followed by a so[rw]wakeup(), explicitly acquire the socket buffer lock and use the _locked() variants of both calls. Note that the _locked() sowakeup() versions unlock the mutex on return. This is done in uipc_send(), divert_packet(), mroute socket_send(), raw_append(), tcp_reass(), tcp_input(), and udp_append(). - When the socket buffer lock is dropped before a sowakeup(), remove the explicit unlock and use the _locked() sowakeup() variant. This is done in soisdisconnecting(), soisdisconnected() when setting the can't send/ receive flags and dropping data, and in uipc_rcvd() which adjusting back-pressure on the sockets. For UNIX domain sockets running mpsafe with a contention-intensive SMP mysql benchmark, this results in a 1.6% query rate improvement due to reduce mutex costs.
2004-06-26 19:10:39 +00:00
sowwakeup_locked(so);
More caddr_t removal. Change struct knote's kn_hook from caddr_t to void *.
2002-06-29 00:29:12 +00:00
wakeup(&so->so_timeo);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
/*
* Create a "control" mbuf containing the specified data
* with the specified type for presentation on a socket buffer.
*/
struct mbuf *
sbcreatecontrol(p, size, type, level)
caddr_t p;
register int size;
int type, level;
{
register struct cmsghdr *cp;
struct mbuf *m;
Allow sbcreatecontrol to make cluster sized control messages.
2001-10-04 12:59:53 +00:00
if (CMSG_SPACE((u_int)size) > MCLBYTES)
Add length check to sbcreatecontrol(). Now this check is necessary because IPv6 source routing might use control data bigger than MLEN. (e.g. 16bytes IPv6 addr x 23 hops) Actually mbuf cluster should be used in uipc_socket.c:sbcreatecontrol() and uipc_syscalls.c:sockargs() when data size is bigger then MLEN, and such patches were already in KAME environment and have been confirmed to work well. I just forgot to merge them into 4.0, sorry. For safety, I'll postpone such patches until after 4.0 release. The effect of postponement is followings. -Ping6 source routing hops are limitted to around 6 or so. -If some apps do setsockopt IPV6_RTHDR and try to receive incoming IPv6 source routing info, it can't receive more than 6 hops source routing info. (But currently, no apps seems to be doing it.) Approved by: jkh
2000-02-24 19:21:26 +00:00
return ((struct mbuf *) NULL);
Fix a typo in a comparison appeared in rev. 1.125. Submitted by: JINMEI Tatuya
2004-10-27 05:37:58 +00:00
if (CMSG_SPACE((u_int)size) > MLEN)
Bring in mbuma to replace mballoc. mbuma is an Mbuf & Cluster allocator built on top of a number of extensions to the UMA framework, all included herein. Extensions to UMA worth noting: - Better layering between slab <-> zone caches; introduce Keg structure which splits off slab cache away from the zone structure and allows multiple zones to be stacked on top of a single Keg (single type of slab cache); perhaps we should look into defining a subset API on top of the Keg for special use by malloc(9), for example. - UMA_ZONE_REFCNT zones can now be added, and reference counters automagically allocated for them within the end of the associated slab structures. uma_find_refcnt() does a kextract to fetch the slab struct reference from the underlying page, and lookup the corresponding refcnt. mbuma things worth noting: - integrates mbuf & cluster allocations with extended UMA and provides caches for commonly-allocated items; defines several zones (two primary, one secondary) and two kegs. - change up certain code paths that always used to do: m_get() + m_clget() to instead just use m_getcl() and try to take advantage of the newly defined secondary Packet zone. - netstat(1) and systat(1) quickly hacked up to do basic stat reporting but additional stats work needs to be done once some other details within UMA have been taken care of and it becomes clearer to how stats will work within the modified framework. From the user perspective, one implication is that the NMBCLUSTERS compile-time option is no longer used. The maximum number of clusters is still capped off according to maxusers, but it can be made unlimited by setting the kern.ipc.nmbclusters boot-time tunable to zero. Work should be done to write an appropriate sysctl handler allowing dynamic tuning of kern.ipc.nmbclusters at runtime. Additional things worth noting/known issues (READ): - One report of 'ips' (ServeRAID) driver acting really slow in conjunction with mbuma. Need more data. Latest report is that ips is equally sucking with and without mbuma. - Giant leak in NFS code sometimes occurs, can't reproduce but currently analyzing; brueffer is able to reproduce but THIS IS NOT an mbuma-specific problem and currently occurs even WITHOUT mbuma. - Issues in network locking: there is at least one code path in the rip code where one or more locks are acquired and we end up in m_prepend() with M_WAITOK, which causes WITNESS to whine from within UMA. Current temporary solution: force all UMA allocations to be M_NOWAIT from within UMA for now to avoid deadlocks unless WITNESS is defined and we can determine with certainty that we're not holding any locks when we're M_WAITOK. - I've seen at least one weird socketbuffer empty-but- mbuf-still-attached panic. I don't believe this to be related to mbuma but please keep your eyes open, turn on debugging, and capture crash dumps. This change removes more code than it adds. A paper is available detailing the change and considering various performance issues, it was presented at BSDCan2004: http://www.unixdaemons.com/~bmilekic/netbuf_bmilekic.pdf Please read the paper for Future Work and implementation details, as well as credits. Testing and Debugging: rwatson, brueffer, Ketrien I. Saihr-Kesenchedra, ... Reviewed by: Lots of people (for different parts)
2004-05-31 21:46:06 +00:00
m = m_getcl(M_DONTWAIT, MT_CONTROL, 0);
else
m = m_get(M_DONTWAIT, MT_CONTROL);
if (m == NULL)
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
return ((struct mbuf *) NULL);
cp = mtod(m, struct cmsghdr *);
Allow sbcreatecontrol to make cluster sized control messages.
2001-10-04 12:59:53 +00:00
m->m_len = 0;
KASSERT(CMSG_SPACE((u_int)size) <= M_TRAILINGSPACE(m),
("sbcreatecontrol: short mbuf"));
if (p != NULL)
(void)memcpy(CMSG_DATA(cp), p, size);
CMSG_XXX macros alignment fixes to follow RFC2292. Approved by: jkh Submitted by: Partly from tech@openbsd Reviewed by: itojun
2000-03-03 11:13:12 +00:00
m->m_len = CMSG_SPACE(size);
cp->cmsg_len = CMSG_LEN(size);
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
cp->cmsg_level = level;
cp->cmsg_type = type;
return (m);
}
This is a proposal-in-code for a substantial modification of the way the high kernel calls into a protocol stack to perform requests on the user's behalf. We replace the pr_usrreq() entry in struct protosw with a pointer to a structure containing pointers to functions which implement the various reuqests; each function is declared with the correct type and number of arguments. (This is unlike the current scheme in which a quarter of the requests take arguments of type other than (struct mbuf *) and the difference is papered over with casts.) There are a few benefits to this new scheme: 1) Arguments are passed with their correct types, and null-pointer dummies are no longer necessary. 2) There should be slightly better caching effects from eliminating the prximity to extraneous code and th switch in pr_usrreq(). 3) It becomes much easier to change the types of the arguments to something other than `struct mbuf *' (e.g.,pushing the work of sosend() into the protocol as advocated by Van Jacobson). There is one principal drawback: existing protocol stacks need to be modified. This is alleviated by compatibility code in uipc_socket2.c and uipc_domain.c which emulates the new interface in terms of the old and vice versa. This idea is not original to me. I read about what Jacobson did in one of his papers and have tried to implement the first steps towards something like that here. Much work remains to be done.
1996-07-09 19:12:53 +00:00
/*
Modify the kernel to use the new pr_usrreqs interface rather than the old pr_usrreq mechanism which was poorly designed and error-prone. This commit renames pr_usrreq to pr_ousrreq so that old code which depended on it would break in an obvious manner. This commit also implements the new interface for TCP, although the old function is left as an example (#ifdef'ed out). This commit ALSO fixes a longstanding bug in the TCP timer processing (introduced by davidg on 1995/04/12) which caused timer processing on a TCB to always stop after a single timer had expired (because it misinterpreted the return value from tcp_usrreq() to indicate that the TCB had been deleted). Finally, some code related to polling has been deleted from if.c because it is not relevant t -current and doesn't look at all like my current code.
1996-07-11 16:32:50 +00:00
* Some routines that return EOPNOTSUPP for entry points that are not
* supported by a protocol. Fill in as needed.
This is a proposal-in-code for a substantial modification of the way the high kernel calls into a protocol stack to perform requests on the user's behalf. We replace the pr_usrreq() entry in struct protosw with a pointer to a structure containing pointers to functions which implement the various reuqests; each function is declared with the correct type and number of arguments. (This is unlike the current scheme in which a quarter of the requests take arguments of type other than (struct mbuf *) and the difference is papered over with casts.) There are a few benefits to this new scheme: 1) Arguments are passed with their correct types, and null-pointer dummies are no longer necessary. 2) There should be slightly better caching effects from eliminating the prximity to extraneous code and th switch in pr_usrreq(). 3) It becomes much easier to change the types of the arguments to something other than `struct mbuf *' (e.g.,pushing the work of sosend() into the protocol as advocated by Van Jacobson). There is one principal drawback: existing protocol stacks need to be modified. This is alleviated by compatibility code in uipc_socket2.c and uipc_domain.c which emulates the new interface in terms of the old and vice versa. This idea is not original to me. I read about what Jacobson did in one of his papers and have tried to implement the first steps towards something like that here. Much work remains to be done.
1996-07-09 19:12:53 +00:00
*/
uipc_mbuf.c: do a better job of counting how often we have to wait for memory, or are denied a cluster. uipc_socket2.c: define some generic ``operation-not-supported'' entry points for pr_usrreqs.
1997-02-18 20:43:07 +00:00
int
Fix all areas of the system (or at least all those in LINT) to avoid storing socket addresses in mbufs. (Socket buffers are the one exception.) A number of kernel APIs needed to get fixed in order to make this happen. Also, fix three protocol families which kept PCBs in mbufs to not malloc them instead. Delete some old compatibility cruft while we're at it, and add some new routines in the in_cksum family.
1997-08-16 19:16:27 +00:00
pru_accept_notsupp(struct socket *so, struct sockaddr **nam)
uipc_mbuf.c: do a better job of counting how often we have to wait for memory, or are denied a cluster. uipc_socket2.c: define some generic ``operation-not-supported'' entry points for pr_usrreqs.
1997-02-18 20:43:07 +00:00
{
return EOPNOTSUPP;
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
int
pru_attach_notsupp(struct socket *so, int proto, struct thread *td)
{
return EOPNOTSUPP;
}
int
pru_bind_notsupp(struct socket *so, struct sockaddr *nam, struct thread *td)
{
return EOPNOTSUPP;
}
Attempt to convert the ip_divert code to use the new-style protocol request switch. I needed 'LINT' to compile for other reasons so I kinda got the blood on my hands. Note: I don't know how to test this, I don't know if it works correctly.
1997-05-24 17:23:11 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
pru_connect_notsupp(struct socket *so, struct sockaddr *nam, struct thread *td)
Attempt to convert the ip_divert code to use the new-style protocol request switch. I needed 'LINT' to compile for other reasons so I kinda got the blood on my hands. Note: I don't know how to test this, I don't know if it works correctly.
1997-05-24 17:23:11 +00:00
{
return EOPNOTSUPP;
}
This is a proposal-in-code for a substantial modification of the way the high kernel calls into a protocol stack to perform requests on the user's behalf. We replace the pr_usrreq() entry in struct protosw with a pointer to a structure containing pointers to functions which implement the various reuqests; each function is declared with the correct type and number of arguments. (This is unlike the current scheme in which a quarter of the requests take arguments of type other than (struct mbuf *) and the difference is papered over with casts.) There are a few benefits to this new scheme: 1) Arguments are passed with their correct types, and null-pointer dummies are no longer necessary. 2) There should be slightly better caching effects from eliminating the prximity to extraneous code and th switch in pr_usrreq(). 3) It becomes much easier to change the types of the arguments to something other than `struct mbuf *' (e.g.,pushing the work of sosend() into the protocol as advocated by Van Jacobson). There is one principal drawback: existing protocol stacks need to be modified. This is alleviated by compatibility code in uipc_socket2.c and uipc_domain.c which emulates the new interface in terms of the old and vice versa. This idea is not original to me. I read about what Jacobson did in one of his papers and have tried to implement the first steps towards something like that here. Much work remains to be done.
1996-07-09 19:12:53 +00:00
int
Modify the kernel to use the new pr_usrreqs interface rather than the old pr_usrreq mechanism which was poorly designed and error-prone. This commit renames pr_usrreq to pr_ousrreq so that old code which depended on it would break in an obvious manner. This commit also implements the new interface for TCP, although the old function is left as an example (#ifdef'ed out). This commit ALSO fixes a longstanding bug in the TCP timer processing (introduced by davidg on 1995/04/12) which caused timer processing on a TCB to always stop after a single timer had expired (because it misinterpreted the return value from tcp_usrreq() to indicate that the TCB had been deleted). Finally, some code related to polling has been deleted from if.c because it is not relevant t -current and doesn't look at all like my current code.
1996-07-11 16:32:50 +00:00
pru_connect2_notsupp(struct socket *so1, struct socket *so2)
This is a proposal-in-code for a substantial modification of the way the high kernel calls into a protocol stack to perform requests on the user's behalf. We replace the pr_usrreq() entry in struct protosw with a pointer to a structure containing pointers to functions which implement the various reuqests; each function is declared with the correct type and number of arguments. (This is unlike the current scheme in which a quarter of the requests take arguments of type other than (struct mbuf *) and the difference is papered over with casts.) There are a few benefits to this new scheme: 1) Arguments are passed with their correct types, and null-pointer dummies are no longer necessary. 2) There should be slightly better caching effects from eliminating the prximity to extraneous code and th switch in pr_usrreq(). 3) It becomes much easier to change the types of the arguments to something other than `struct mbuf *' (e.g.,pushing the work of sosend() into the protocol as advocated by Van Jacobson). There is one principal drawback: existing protocol stacks need to be modified. This is alleviated by compatibility code in uipc_socket2.c and uipc_domain.c which emulates the new interface in terms of the old and vice versa. This idea is not original to me. I read about what Jacobson did in one of his papers and have tried to implement the first steps towards something like that here. Much work remains to be done.
1996-07-09 19:12:53 +00:00
{
Modify the kernel to use the new pr_usrreqs interface rather than the old pr_usrreq mechanism which was poorly designed and error-prone. This commit renames pr_usrreq to pr_ousrreq so that old code which depended on it would break in an obvious manner. This commit also implements the new interface for TCP, although the old function is left as an example (#ifdef'ed out). This commit ALSO fixes a longstanding bug in the TCP timer processing (introduced by davidg on 1995/04/12) which caused timer processing on a TCB to always stop after a single timer had expired (because it misinterpreted the return value from tcp_usrreq() to indicate that the TCB had been deleted). Finally, some code related to polling has been deleted from if.c because it is not relevant t -current and doesn't look at all like my current code.
1996-07-11 16:32:50 +00:00
return EOPNOTSUPP;
This is a proposal-in-code for a substantial modification of the way the high kernel calls into a protocol stack to perform requests on the user's behalf. We replace the pr_usrreq() entry in struct protosw with a pointer to a structure containing pointers to functions which implement the various reuqests; each function is declared with the correct type and number of arguments. (This is unlike the current scheme in which a quarter of the requests take arguments of type other than (struct mbuf *) and the difference is papered over with casts.) There are a few benefits to this new scheme: 1) Arguments are passed with their correct types, and null-pointer dummies are no longer necessary. 2) There should be slightly better caching effects from eliminating the prximity to extraneous code and th switch in pr_usrreq(). 3) It becomes much easier to change the types of the arguments to something other than `struct mbuf *' (e.g.,pushing the work of sosend() into the protocol as advocated by Van Jacobson). There is one principal drawback: existing protocol stacks need to be modified. This is alleviated by compatibility code in uipc_socket2.c and uipc_domain.c which emulates the new interface in terms of the old and vice versa. This idea is not original to me. I read about what Jacobson did in one of his papers and have tried to implement the first steps towards something like that here. Much work remains to be done.
1996-07-09 19:12:53 +00:00
}
uipc_mbuf.c: do a better job of counting how often we have to wait for memory, or are denied a cluster. uipc_socket2.c: define some generic ``operation-not-supported'' entry points for pr_usrreqs.
1997-02-18 20:43:07 +00:00
int
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
pru_control_notsupp(struct socket *so, u_long cmd, caddr_t data,
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
struct ifnet *ifp, struct thread *td)
{
return EOPNOTSUPP;
}
int
pru_disconnect_notsupp(struct socket *so)
The long-awaited mega-massive-network-code- cleanup. Part I. This commit includes the following changes: 1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility glue for them is deleted, and the kernel will panic on boot if any are compiled in. 2) Certain protocol entry points are modified to take a process structure, so they they can easily tell whether or not it is possible to sleep, and also to access credentials. 3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt() call. Protocols should use the process pointer they are now passed. 4) The PF_LOCAL and PF_ROUTE families have been updated to use the new style, as has the `raw' skeleton family. 5) PF_LOCAL sockets now obey the process's umask when creating a socket in the filesystem. As a result, LINT is now broken. I'm hoping that some enterprising hacker with a bit more time will either make the broken bits work (should be easy for netipx) or dike them out.
1997-04-27 20:01:29 +00:00
{
return EOPNOTSUPP;
}
int
Push the assignment of a new or updated so_qlimit from solisten() following the protocol pru_listen() call to solisten_proto(), so that it occurs under the socket lock acquisition that also sets SO_ACCEPTCONN. This requires passing the new backlog parameter to the protocol, which also allows the protocol to be aware of changes in queue limit should it wish to do something about the new queue limit. This continues a move towards the socket layer acting as a library for the protocol. Bump __FreeBSD_version due to a change in the in-kernel protocol interface. This change has been tested with IPv4 and UNIX domain sockets, but not other protocols.
2005-10-30 19:44:40 +00:00
pru_listen_notsupp(struct socket *so, int backlog, struct thread *td)
uipc_mbuf.c: do a better job of counting how often we have to wait for memory, or are denied a cluster. uipc_socket2.c: define some generic ``operation-not-supported'' entry points for pr_usrreqs.
1997-02-18 20:43:07 +00:00
{
return EOPNOTSUPP;
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
int
pru_peeraddr_notsupp(struct socket *so, struct sockaddr **nam)
{
return EOPNOTSUPP;
}
uipc_mbuf.c: do a better job of counting how often we have to wait for memory, or are denied a cluster. uipc_socket2.c: define some generic ``operation-not-supported'' entry points for pr_usrreqs.
1997-02-18 20:43:07 +00:00
int
pru_rcvd_notsupp(struct socket *so, int flags)
{
return EOPNOTSUPP;
}
int
pru_rcvoob_notsupp(struct socket *so, struct mbuf *m, int flags)
{
return EOPNOTSUPP;
}
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
int
pru_send_notsupp(struct socket *so, int flags, struct mbuf *m,
struct sockaddr *addr, struct mbuf *control, struct thread *td)
{
return EOPNOTSUPP;
}
uipc_mbuf.c: do a better job of counting how often we have to wait for memory, or are denied a cluster. uipc_socket2.c: define some generic ``operation-not-supported'' entry points for pr_usrreqs.
1997-02-18 20:43:07 +00:00
/*
* This isn't really a ``null'' operation, but it's the default one
* and doesn't do anything destructive.
*/
int
pru_sense_null(struct socket *so, struct stat *sb)
{
sb->st_blksize = so->so_snd.sb_hiwat;
return 0;
}
Create a new branch of the kernel MIB, kern.ipc, to store all of the configurables and instrumentation related to inter-process communication mechanisms. Some variables, like mbuf statistics, are instrumented here for the first time. For mbuf statistics: also keep track of m_copym() and m_pullup() failures, and provide for the user's inspection the compiled-in values of MSIZE, MHLEN, MCLBYTES, and MINCLSIZE.
1997-02-24 20:30:58 +00:00
Support for dynamically loadable and unloadable protocols within existing protocol families. The protosw[] array of any particular protocol family ("domain") is of fixed size defined at compile time. This made it impossible to dynamically add or remove any protocols to or from it. We work around this by introducing so called SPACER's which are embedded into the protosw[] array at compile time. The SPACER's have a special protocol number (32767) to indicate the fact that they are SPACER's but are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's are provided in the protosw[] structure. The pr_usrreqs structure is treated more special and contains pointers to dummy functions only returning EOPNOTSUPP. This is needed because the use of those functions pointers is usually not checked within the kernel because until now it was assumed to be a valid function pointer. Instead of fixing all potential callers we just return a proper error code. Two new functions provide a clean API to register and unregister a protocol. The register function expects a pointer to a valid and complete struct protosw including a pointer to struct pru_usrreqs provided by the caller. Upon successful registration the pr_init() function will be called to finish initialization of the protocol. The unregister function restores the SPACER in place of the protocol again. It is the responseability of the caller to ensure proper closing of all sockets and freeing of memory allocation by the unloading protocol. sys/protosw.h o Define generic PROTO_SPACER to be 32767 o Prototypes for all pru_*_notsupp() functions o Prototypes for pf_proto_[un]register() functions kern/uipc_domain.c o Global struct pr_usrreqs nousrreqs containing valid pointers to the pru_*_notsupp() functions o New functions pf_proto_[un]register() kern/uipc_socket2.c o New functions bodies for all pru_*_notsupp() functions
2004-10-19 15:13:30 +00:00
int
pru_shutdown_notsupp(struct socket *so)
{
return EOPNOTSUPP;
}
int
pru_sockaddr_notsupp(struct socket *so, struct sockaddr **nam)
{
return EOPNOTSUPP;
}
int
pru_sosend_notsupp(struct socket *so, struct sockaddr *addr, struct uio *uio,
struct mbuf *top, struct mbuf *control, int flags, struct thread *td)
{
return EOPNOTSUPP;
}
int
pru_soreceive_notsupp(struct socket *so, struct sockaddr **paddr,
struct uio *uio, struct mbuf **mp0, struct mbuf **controlp,
int *flagsp)
{
return EOPNOTSUPP;
}
int
pru_sopoll_notsupp(struct socket *so, int events, struct ucred *cred,
struct thread *td)
{
return EOPNOTSUPP;
}
Fix all areas of the system (or at least all those in LINT) to avoid storing socket addresses in mbufs. (Socket buffers are the one exception.) A number of kernel APIs needed to get fixed in order to make this happen. Also, fix three protocol families which kept PCBs in mbufs to not malloc them instead. Delete some old compatibility cruft while we're at it, and add some new routines in the in_cksum family.
1997-08-16 19:16:27 +00:00
/*
* Make a copy of a sockaddr in a malloced buffer of type M_SONAME.
*/
struct sockaddr *
Rename dup_sockaddr() to sodupsockaddr() for consistency with other functions in kern_socket.c. Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT in from the caller context rather than "1" or "0". Correct mflags pass into mac_init_socket() from previous commit to not include M_ZERO. Submitted by: sam
2004-03-01 03:14:23 +00:00
sodupsockaddr(const struct sockaddr *sa, int mflags)
Fix all areas of the system (or at least all those in LINT) to avoid storing socket addresses in mbufs. (Socket buffers are the one exception.) A number of kernel APIs needed to get fixed in order to make this happen. Also, fix three protocol families which kept PCBs in mbufs to not malloc them instead. Delete some old compatibility cruft while we're at it, and add some new routines in the in_cksum family.
1997-08-16 19:16:27 +00:00
{
struct sockaddr *sa2;
Rename dup_sockaddr() to sodupsockaddr() for consistency with other functions in kern_socket.c. Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT in from the caller context rather than "1" or "0". Correct mflags pass into mac_init_socket() from previous commit to not include M_ZERO. Submitted by: sam
2004-03-01 03:14:23 +00:00
sa2 = malloc(sa->sa_len, M_SONAME, mflags);
Fix all areas of the system (or at least all those in LINT) to avoid storing socket addresses in mbufs. (Socket buffers are the one exception.) A number of kernel APIs needed to get fixed in order to make this happen. Also, fix three protocol families which kept PCBs in mbufs to not malloc them instead. Delete some old compatibility cruft while we're at it, and add some new routines in the in_cksum family.
1997-08-16 19:16:27 +00:00
if (sa2)
bcopy(sa, sa2, sa->sa_len);
return sa2;
}
Convert socket structures to be type-stable and add a version number. Define a parameter which indicates the maximum number of sockets in a system, and use this to size the zone allocators used for sockets and for certain PCBs. Convert PF_LOCAL PCB structures to be type-stable and add a version number. Define an external format for infomation about socket structures and use it in several places. Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through sysctl(3) without blocking network interrupts for an unreasonable length of time. This probably still has some bugs and/or race conditions, but it seems to work well enough on my machines. It is now possible for `netstat' to get almost all of its information via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00
/*
* Create an external-format (``xsocket'') structure using the information
* in the kernel-format socket structure pointed to by so. This is done
* to reduce the spew of irrelevant information over this interface,
* to isolate user code from changes in the kernel structure, and
* potentially to provide information-hiding if we decide that
* some of this information should be hidden from users.
*/
void
sotoxsocket(struct socket *so, struct xsocket *xso)
{
xso->xso_len = sizeof *xso;
xso->xso_so = so;
xso->so_type = so->so_type;
xso->so_options = so->so_options;
xso->so_linger = so->so_linger;
xso->so_state = so->so_state;
xso->so_pcb = so->so_pcb;
xso->xso_protocol = so->so_proto->pr_protocol;
xso->xso_family = so->so_proto->pr_domain->dom_family;
xso->so_qlen = so->so_qlen;
xso->so_incqlen = so->so_incqlen;
xso->so_qlimit = so->so_qlimit;
xso->so_timeo = so->so_timeo;
xso->so_error = so->so_error;
Installed the second patch attached to kern/7899 with some changes suggested by bde, a few other tweaks to get the patch to apply cleanly again and some improvements to the comments. This change closes some fairly minor security holes associated with F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN had on tty devices. For more details, see the description on the PR. Because this patch increases the size of the proc and pgrp structures, it is necessary to re-install the includes and recompile libkvm, the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w. PR: kern/7899 Reviewed by: bde, elvind
1998-11-11 10:04:13 +00:00
xso->so_pgid = so->so_sigio ? so->so_sigio->sio_pgid : 0;
Convert socket structures to be type-stable and add a version number. Define a parameter which indicates the maximum number of sockets in a system, and use this to size the zone allocators used for sockets and for certain PCBs. Convert PF_LOCAL PCB structures to be type-stable and add a version number. Define an external format for infomation about socket structures and use it in several places. Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through sysctl(3) without blocking network interrupts for an unreasonable length of time. This probably still has some bugs and/or race conditions, but it seems to work well enough on my machines. It is now possible for `netstat' to get almost all of its information via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00
xso->so_oobmark = so->so_oobmark;
sbtoxsockbuf(&so->so_snd, &xso->so_snd);
sbtoxsockbuf(&so->so_rcv, &xso->so_rcv);
Change so_cred's type to a ucred, not a pcred. THis makes more sense, actually. Make a sonewconn3() which takes an extra argument (proc) so new sockets created with sonewconn() from a user's system call get the correct credentials, not just the parent's credentials.
1999-09-19 02:17:02 +00:00
xso->so_uid = so->so_cred->cr_uid;
Convert socket structures to be type-stable and add a version number. Define a parameter which indicates the maximum number of sockets in a system, and use this to size the zone allocators used for sockets and for certain PCBs. Convert PF_LOCAL PCB structures to be type-stable and add a version number. Define an external format for infomation about socket structures and use it in several places. Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through sysctl(3) without blocking network interrupts for an unreasonable length of time. This probably still has some bugs and/or race conditions, but it seems to work well enough on my machines. It is now possible for `netstat' to get almost all of its information via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00
}
/*
* This does the same for sockbufs. Note that the xsockbuf structure,
* since it is always embedded in a socket, does not include a self
* pointer nor a length. We make this entry point public in case
* some other mechanism needs it.
*/
void
sbtoxsockbuf(struct sockbuf *sb, struct xsockbuf *xsb)
{
xsb->sb_cc = sb->sb_cc;
xsb->sb_hiwat = sb->sb_hiwat;
xsb->sb_mbcnt = sb->sb_mbcnt;
xsb->sb_mbmax = sb->sb_mbmax;
xsb->sb_lowat = sb->sb_lowat;
xsb->sb_flags = sb->sb_flags;
xsb->sb_timeo = sb->sb_timeo;
}
Reference in New Issue Copy Permalink